Melt Electrowriting Research Articles

Convergence of melt electrowriting and extrusion-based bioprinting for vascular patterning of a myocardial construct

To progress cardiac tissue engineering strategies closer to the clinic, thicker constructs are required to meet the functional need following a cardiac event. Consequently, pre-vascularization of these constructs needs to be investigated to ensure survival and optimal performance of implantable engineered heart tissue. The aim of this research is to investigate the potential of combining extrusion-based bioprinting (EBB) and melt electrowriting for the fabrication of a myocardial construct with a precisely patterned pre-vascular pathway. Gelatin methacryloyl (GelMA) was investigated as a base hydrogel for the respective myocardial and vascular bioinks with collagen, Matrigel and fibrinogen as interpenetrating polymers to support myocardial functionality. Subsequently, extrusion-based printability and viability were investigated to determine the optimal processing parameters for printing into melt electrowritten meshes. Finally, an anatomically inspired vascular pathway was implemented in a dual EBB set-up into melt electrowritten meshes, creating a patterned pre-vascularized myocardial construct. It was determined that a blend of 5% GelMA and 0.8 mg·ml−1 collagen with a low crosslinked density was optimal for myocardial cellular arrangement and alignment within the constructs. For the vascular fraction, the optimized formulation consisted of 5% GelMA, 0.8 mg·ml−1 collagen and 1 mg·ml−1 fibrinogen with a higher crosslinked density, which led to enhanced vascular cell connectivity. Printability assessment confirmed that the optimized bioinks could effectively fill the microfiber mesh while supporting cell viability (∼70%). Finally, the two bioinks were applied using a dual EBB system for the fabrication of a pre-vascular pathway with the shape of a left anterior descending artery within a myocardial construct, whereby the distinct cell populations could be visualized in their respective patterns up to D14. This research investigated the first step towards developing a thick engineered cardiac tissue construct in which a pre-vascularization pathway is fabricated within a myocardial construct.

Volumetric Printing across Melt Electrowritten Scaffolds Fabricates Multi-Material Living Constructs with Tunable Architecture and Mechanics.

Major challenges in biofabrication revolve around capturing the complex, hierarchical composition of native tissues. However, individual 3D printing techniques have limited capacity to produce composite biomaterials with multi-scale resolution. Volumetric bioprinting recently emerged as a paradigm-shift in biofabrication. This ultra-fast, light-based technique sculpts cell-laden hydrogel bioresins into three-dimensional structures in a layerless fashion, providing enhanced design freedom over conventional bioprinting. However, it yields prints with low mechanical stability, since soft, cell-friendly hydrogels are used. Herein, for the first time, the possibility to converge volumetric bioprinting with melt electrowriting, which excels at patterning microfibers, is shown for the fabrication of tubular hydrogel-based composites with enhanced mechanical behavior. Despite including non-transparent melt electrowritten scaffolds into the volumetric printing process, high-resolution bioprinted structures were successfully achieved. Tensile, burst and bending mechanical properties of printed tubes were tuned altering the electrowritten mesh design, resulting in complex, multi-material tubular constructs with customizable, anisotropic geometries that better mimic intricate biological tubular structures. As a proof-of-concept, engineered tubular structures were obtained by building tri-layered cell-laden vessels, and features (valves, branches, fenestrations) that could be rapidly printed using this hybrid approach. This multi-technology convergence offers a new toolbox for manufacturing hierarchical and mechanically tunable multi-material living structures. This article is protected by copyright. All rights reserved.

Evaluation of surgical fixation methods for the implantation of melt electrowriting-reinforced hyaluronic acid hydrogel composites in porcine cartilage defects.

The surgical repair of articular cartilage remains an ongoing challenge in orthopedics. Tissue engineering is a promising approach to treat cartilage defects; however, scaffolds must (i) possess the requisite material properties to support neocartilage formation, (ii) exhibit sufficient mechanical integrity for handling during implantation, and (iii) be reliably fixed within cartilage defects during surgery. In this study, we demonstrate the reinforcement of soft norbornene-modified hyaluronic acid (NorHA) hydrogels via the melt electrowriting (MEW) of polycaprolactone to fabricate composite scaffolds that support encapsulated porcine mesenchymal stromal cell (pMSC, three donors) chondrogenesis and cartilage formation and exhibit mechanical properties suitable for handling during implantation. Thereafter, acellular MEW-NorHA composites or MEW-NorHA composites with encapsulated pMSCs and precultured for 28 days were implanted in full-thickness cartilage defects in porcine knees using either bioresorbable pins or fibrin glue to assess surgical fixation methods. Fixation of composites with either biodegradable pins or fibrin glue ensured implant retention in most cases (80%); however, defects treated with pinned composites exhibited more subchondral bone remodeling and inferior cartilage repair, as evidenced by micro-computed tomography (micro-CT) and safranin O/fast green staining, respectively, when compared to defects treated with glued composites. Interestingly, no differences in repair tissue were observed between acellular and cellularized implants. Additional work is required to assess the full potential of these scaffolds for cartilage repair. However, these results suggest that future approaches for cartilage repair with MEW-reinforced hydrogels should be carefully evaluated with regard to their fixation approach for construct retention and surrounding cartilage tissue damage.

Filament‐Based Melt Electrowriting Enables Dual‐Mode Additive Manufacturing for Multiscale Constructs

Melt electrowriting (MEW) is an electric‐field‐assisted fiber‐forming biofabrication strategy for the additive manufacturing (AM) of precisely defined 3D microarchitectures. MEW is based on pressure‐driven extrusion of a polymer melt pool, currently mainly implemented at laboratory scale with specialized machine technology and limited to only few materials. This precludes the accessibility of MEW to a broader user group and can become the bottleneck of MEW's technological advancement. In contrast to conventional MEW, a filament‐based approach (F‐MEW) is introduced that exploits the technological ecosystem of fused filament fabrication (FFF), a globally used transformative AM technique. In this work, a polymer filament serves as feedstock material and is melted just on demand. By upgrading existing FFF systems, MEW of polymer microfibers is enabled, as validated with polycaprolactone (PCL) and demonstrated with direct writing of thermosensitive polydioxanone (PDO). Finally, FFF and F‐MEW are hybridized in a dual‐mode AM process. This enables multiscale constructs featuring both FFF struts and one order of magnitude smaller F‐MEW microfibers. This work opens the accessibility of F‐MEW to the large FFF user group, potentially benefitting from the plethora of filaments available for FFF, while, at the same time, expanding the FFF fabrication window.

Melt electrowritten scaffolds containing fluorescent nanodiamonds for improved mechanical properties and degradation monitoring

Biocompatible fluorescent nanodiamonds (FNDs) were introduced into polycaprolactone (PCL) – the golden standard material in melt electrowriting (MEW). MEW is an advanced additive manufacturing technique capable of depositing high-resolution micrometric fibres. Due to the high printing precision, MEW finds growing interest in tissue engineering applications. Here, we introduced fluorescent nanodiamonds (FNDs) into polycaprolactone prior to printing to fabricate scaffolds for biomedical applications with improved mechanical properties. Further FNDs offer the possibility of their real-time degradation tracking. Compared to pure PCL scaffolds, the functionalized ones containing 0.001 wt% of 70 nm-diameter nanodiamonds (PCL-FNDs) showed increased tensile moduli (1.25 fold) and improved cell proliferation during 7-day cell cultures (2.00 fold increase). Furthermore, the addition of FNDs slowed down the hydrolytic degradation process of the scaffolds, accelerated for the purpose of the study by addition of the enzyme lipase to deionized water. Pure PCL scaffolds showed obvious signs of degradation after 3 h, not observed for PCL-FNDs scaffolds during this time. Additionally, due to the nitrogen-vacancy (NV) centers present on the FNDs, we were able to track their amount and location in real-time in printed fibres using confocal microscopy. This research shows the possibility for high-resolution life-tracking of MEW PCL scaffolds’ degradation.

A Decade of Melt Electrowriting.

Over the past decade, melt electrowriting (MEW) has established the fundamental understanding of processing (and printer) requirements. Iterative work on parametric development and dissemination of this recent additive manufacturing technology has been performed across many systems and polymers (mainly poly-(ε-caprolactone)), showing similarities and trends. However, the software and hardware ecosystems of MEW are not mature. Further, due to its multi-parametric nature, MEW can be challenging for laboratories to master. This review intends to provide a unique perspective on the dynamic relationship between MEW processing parameters. Such parameters can be divided into 1) those that affect the polymer flow rate to or 2) from the nozzle, and 3) environmental conditions. The most influential parameters for high-quality printing are applied voltage, applied pressure, collector speed, polymer temperature, nozzle diameter, and the conditions that lead to charge buildup (e.g., relative humidity). Other factors such as ambient temperature, nozzle size, and protrusion, collector temperature and conductivity, and collector distance can all affect the process. Success for MEW printing means fibers fall onto the collector according to their pre-programmed path with predicted fiber diameter. Here, the authors elucidate how the dynamic relationship between these parameters can converge into ideal printing conditions to produce scaffolds.

Load-induced fluid pressurisation in hydrogel systems before and after reinforcement by melt-electrowritten fibrous meshes

Fluid pressure develops transiently within mechanically-loaded, cell-embedding hydrogels, but its magnitude depends on the intrinsic material properties of the hydrogel and cannot be easily altered. The recently developed melt-electrowriting (MEW) technique enables three-dimensional printing of structured fibrous mesh with small fibre diameter (20 μm). The MEW mesh with 20 μm fibre diameter can synergistically increase the instantaneous mechanical stiffness of soft hydrogels. However, the reinforcing mechanism of the MEW meshes is not well understood, and may involve load-induced fluid pressurisation. Here, we examined the reinforcing effect of MEW meshes in three hydrogels: gelatin methacryloyl (GelMA), agarose and alginate, and the role of load-induced fluid pressurisation in the MEW reinforcement. We tested the hydrogels with and without MEW mesh (i.e., hydrogel alone, and MEW-hydrogel composite) using micro-indentation and unconfined compression, and analysed the mechanical data using biphasic Hertz and mixture models. We found that the MEW mesh altered the tension-to-compression modulus ratio differently for hydrogels that are cross-linked differently, which led to a variable change to their load-induced fluid pressurisation. MEW meshes only enhanced the fluid pressurisation for GelMA, but not for agarose or alginate. We speculate that only covalently cross-linked hydrogels (GelMA) can effectively tense the MEW meshes, thereby enhancing the fluid pressure developed during compressive loading. In conclusion, load-induced fluid pressurisation in selected hydrogels was enhanced by MEW fibrous mesh, and may be controlled by MEW mesh of different designs in the future, thereby making fluid pressure a tunable cell growth stimulus for tissue engineering involving mechanical stimulation.

Fabrication of Janus Composite Membranes with a Gradient Pore Structure Based on Melt Electrowriting and Solution Electrospinning for Directional Water Transport

As a functional textile, the directional water transport textile has been widely used in daily life due to the ability of excellent moisture absorption and quick drying. However, it is still a great challenge to construct a textile that ensures water to transport rapidly from the skin to the outer environment (positive direction) and prevents the skin from being rewetted effectively in the reverse direction. Herein, this study aims to improve the ability of the hydrophobic layer in moisture management using melt electrowriting (MEW) to fabricate gradient pore structures precisely. The pore sizes in different layers can be tailored by altering the collector speed, and thus, the configuration of the pore structure dominates the process of water transportation. The unique multilayered structure achieves the directional water transport effects by improving the permeability with large pores and hindering the transport with small pores in the reverse direction. Meanwhile, we use solution electrospinning (SE) technology to fabricate the hydrophilic layer. The constructed composite membranes exhibit excellent performance with a one-way transport index R up to 1281% and a desired overall moisture management capacity (OMMC) of 0.87. This research outlines an approach to fabricating Janus membranes to enhance its directional water transport performance, facilitating the MEW technique to be applied on the more expanded field for directional water transport textiles.

Thermochromic Responses on Melt Electrowritten Poly(ϵ-caprolactone) Microstructures

Melt electrowriting produces complex polymeric microstructures by controlling electrified polymer jet deposition. This work explores the potential of designing poly(ϵ-caprolactone) MEW microstructures with thermochromic responses. Samples with up to 4 wt % thermochromic dye content with fibers of 20.7 ± 0.9 μm have been processed without compromising printing quality. This small amount of filler content results in the desired active response of color change at a certain temperature. A multimaterial structure combining two thermochromic dyes with different activation temperatures was also designed. Overall, the ability to include additives in the MEW process without significant disruption expands the technology applicability.

Chondroitinase ABC Treatment Improves the Organization and Mechanics of 3D Bioprinted Meniscal Tissue.

The meniscus is a fibrocartilage tissue that is integral to the correct functioning of the knee joint. The tissue possesses a unique collagen fiber architecture that is integral to its biomechanical functionality. In particular, a network of circumferentially aligned collagen fibers function to bear the high tensile forces generated in the tissue during normal daily activities. The limited regenerative capacity of the meniscus has motivated increased interest in meniscus tissue engineering; however, the in vitro generation of structurally organized meniscal grafts with a collagen architecture mimetic of the native meniscus remains a significant challenge. Here we used melt electrowriting (MEW) to produce scaffolds with defined pore architectures to impose physical boundaries upon cell growth and extracellular matrix production. This enabled the bioprinting of anisotropic tissues with collagen fibers preferentially oriented parallel to the long axis of the scaffold pores. Furthermore, temporally removing glycosaminoglycans (sGAGs) during the early stages of in vitro tissue development using chondroitinase ABC (cABC) was found to positively impact collagen network maturation. Specially we found that temporal depletion of sGAGs is associated with an increase in collagen fiber diameter without any detrimental effect on the development of a meniscal tissue phenotype or subsequent extracellular matrix production. Moreover, temporal cABC treatment supported the development of engineered tissues with superior tensile mechanical properties compared to empty MEW scaffolds. These findings demonstrate the benefit of temporal enzymatic treatments when engineering structurally anisotropic tissues using emerging biofabrication technologies such as MEW and inkjet bioprinting.

A Versatile Method to Create Perfusable, Capillary‐Scale Channels in Cell‐Laden Hydrogels Using Melt Electrowriting

AbstractA major obstacle toward creating human‐scale artificial tissue models is supplying encapsulated cells with oxygen and other nutrients throughout the construct. In particular, creating channels in hydrogels that match the resolution and density of the smallest blood capillaries (≤10 µm) remains highly challenging. Here, a novel method is demonstrated where polycaprolactone fibers printed using melt‐electrowriting are encapsulated in cell‐laden hydrogels and then physically removed to produce hollow, perfusable channels. This technique produces a range of channel diameters (10–41 µm) with circular cross‐sections and in hydrogels representing various crosslinking mechanisms. The channels can be formed as interconnected grids, hierarchically branched patterns, or stacked in layers with ≈200 µm channel spacing, thus matching average capillary density in the human body. Alternatively, selective removal of fibers from a melt electrowriting grid can generate perfusable channels within a reinforcing fiber network. This method can be performed in the presence of cells, with human fibroblasts exhibiting encapsulated in gelatin methacryloyl showing no detectable cytotoxic effects. This technique is a promising approach for creating perfusable channels with very small diameters within cell‐laden hydrogel matrices, with potential applications including in vitro tissue models and hydrogel microfluidics.

Magnetically Responsive Melt Electrowritten Structures

AbstractWhile melt electrowriting (MEW) can result in complex microstructures, research demonstrating such fabrication with active materials is limited. Herein, magnetoresponsive poly(ε‐caprolactone) (PCL) inks containing up to 10 wt% of iron‐oxide (Fe3O4) nanoparticles are used to produce fiber with diameters of 9.2 ± 0.6 µm in ordered microstructures when processed by MEW. Introducing the Fe3O4 nanoparticles has a minimal overall effect on printing quality compared to pure PCL under similar conditions. The magnetic response of Fe3O4 containing fibers allows magnetic actuation, which is one of the first steps to control movement in such structures. Printed samples show different magnetic responses that can be controlled by the micro‐ and macro‐structure design, the nanoparticle concentration, and multi‐material design. The potential of MEW to print active magnetic complex micro‐ and macro‐structures for 4D printing designs is demonstrated, in which active properties can be further tailored with magnetoresponsive fillers with varying characteristics and by changing MEW fiber diameters.

2023 TERMIS – AMERICAS Conference & Exhibition Boston Marriott Copley Place April 11–14, 2023

2023 TERMIS – AMERICAS Conference & Exhibition Boston Marriott Copley Place April 11–14, 2023

Melt Electrowriting of Liquid Crystal Elastomer Scaffolds with Programmed Mechanical Response (Adv. Mater. 14/2023)

Melt Electrowriting of Liquid Crystal Elastomer Scaffolds with Programmed Mechanical Response (Adv. Mater. 14/2023)

Characterization of the Protein Corona of Three Chairside Hemoderivatives on Melt Electrowritten Polycaprolactone Scaffolds.

In tissue engineering, the relationship between a biomaterial surface and the host's immune response during wound healing is crucial for tissue regeneration. Despite hemoderivative functionalization of biomaterials becoming a common tissue-engineering strategy for enhanced regeneration, the characteristics of the protein-biomaterial interface have not been fully elucidated. This study characterized the interface formed by the adsorbed proteins from various hemoderivatives with pristine and calcium phosphate (CaP)-coated polycaprolactone (PCL) melt electrowritten scaffolds. PCL scaffolds were fabricated by using melt electrospinning writing (MEW). Three hemoderivatives (pure platelet-rich plasma (P-PRP), leucocyte platelet-rich plasma (L-PRP) and injectable platelet-rich fibrin (i-PRF)) and total blood PLASMA (control) were prepared from ovine blood. Hemoderivatives were characterized via SEM/EDX, cross-linking assay, weight loss, pH and protein quantification. The interface between PCL/CaP and hemoderivative was examined via FTIR, XPS and electrophoresis. i-PRF/PCL-CaP (1653 cm-1), PLASMA/PCL-CaP (1652 cm-1) and i-PRF/PCL (1651 cm-1) demonstrated a strong signal at the Amide I region. PLASMA and i-PRF presented similar N1s spectra, with most of the nitrogen involved in N-C=O bonds (≈400 eV). i-PRF resulted in higher adsorption of low molecular weight (LMW) proteins at 60 min, while PLASMA exhibited the lowest adsorption. L-PRP and P-PRP had a similar pattern of protein adsorption. The characteristics of biomaterial interfaces can be customized, thus creating a specific hemoderivative-defined layer on the PCL surface. i-PRF demonstrated a predominant adsorption of LMW proteins. Further investigation of hemoderivative functionalized biomaterials is required to identify the differential protein corona composition, and the resultant immune response and regenerative capacity.

Melt electrowriting of a biocompatible photo-crosslinkable poly(D,L-lactic acid)/poly(ε-caprolactone)-based material with tunable mechanical and functionalization properties.

The use of polymeric biomaterials to create tissue scaffolds using additive manufacturing techniques is a well-established practice, owing to the incredible rapidity and complexity in design that modern 3D printing methods can provide. One frontier approach is melt electrowriting (MEW), a technique that takes advantage of electrohydrodynamic phenomena to produce fibers on the scale of 10's of microns with designs capable of high resolution and accuracy. Poly(ε-caprolactone) (PCL) is a material that is commonly used in MEW due to its favorable thermal properties, high stability, and biocompatibility. However, one of the drawbacks of this material is that it lacks the necessary chemical groups which allow covalent crosslinking of additional elements onto its structure. Attempts to functionalise PCL structures therefore often rely on the functional units to be applied externally via coatings or integrally mixed elements. Both can be extremely useful depending on their applications, but can add extra difficulties into the use of the resulting structures. Coatings require careful design and application to prevent rapid degradation, while elements mixed into the polymer melt must deal with the possibilities of phase separation and changes to MEW properties of the unadulterated polymer. With this in mind, this study sought to imbibe functionality to MEW-printed scaffolds using the approach of adding functional units directly, via covalent bonding of functional groups to the polymer itself. To this end, this study employs a recently developed class of polymers called acrylate-endcapped urethane-based polymers (AUPs). The polymer backbone of the specific AUP used consists of a poly(D,L-lactic acid) (PDLLA)/PCL copolymer chain, which is functionalized with 6 acrylate groups, 3 at either end. Through blending of the AUP with PCL, various concentrations of this mixture were used with MEW to produce scaffolds that possessed acrylate groups on their surface. Using UV crosslinking, these groups were tagged with Fluorescein-o-Acrylate to verify that PDLLA/PCL AUP/PCL blends facilitate the direct covalent bonding of external agents directly onto the MEW material. Blending of the AUP with PCL increases the scaffold's stiffness and ultimate strength. Finally, blends were proven to be highly biocompatible, with cells attaching and proliferating readily at day 3 and 7 post seeding. Through this work, PDLLA/PCL AUP/PCL blends clearly demonstrated as a biocompatible material that can be processed using MEW to create functionalised tissue scaffolds.

Is 3D Printing Promising for Osteochondral Tissue Regeneration?

Osteochondral tissue regeneration is quite difficult to achieve due to the complexity of its organization. In the design of these complex multilayer structures, a fabrication method, 3D printing, started to be employed, especially by using extrusion, stereolithography and inkjet printing approaches. In this paper, the designs are discussed including biphasic, triphasic, and gradient structures which aim to mimic the cartilage and the calcified cartilage and the whole osteochondral tissue closely. In the first section of the review paper, 3D printing of hydrogels including gelatin methacryloyl (GelMa), alginate, and polyethylene glycol diacrylate (PEGDA) are discussed. However, their physical and biological properties need to be augmented, and this generally is achieved by blending the hydrogel with other, more durable, less hydrophilic, polymers. These scaffolds are very suitable to carry growth factors, such as TGF-β1, to further stimulate chondrogenesis. The bone layer is mimicked by printing calcium phosphates (CaPs) or bioactive glasses together with the hydrogels or as a component of another polymer layer. The current research findings indicate that polyester (i.e. polycaprolactone (PCL), polylactic acid (PLA) and poly(lactide-co-glycolide) (PLGA)) reinforced hydrogels may more successfully mimic the complex structure of osteochondral tissue. Moreover, more recent printing methods such as melt electrowriting (MEW), are being used to integrate polyester fibers to enhance the mechanical properties of hydrogels. Additionally, polyester scaffolds that are 3D printed without hydrogels are discussed after the hydrogel-based scaffolds. In this review paper, the relevant studies are analyzed and discussed, and future work is recommended with support of tables of designed scaffolds. The outcome of the survey of the field is that 3D printing has significant potential to contribute to osteochondral tissue repair.

3D high-precision melt electro written polycaprolactone modified with yeast derived peptides for wound healing

In this study melt electro written (MEW) scaffolds of poly(ε-caprolactone) PCL are decorated with anti-inflammatory yeast-derived peptide for skin wound healing. Initially, 13 different yeast-derived peptides were screened and analyzed using both in vitro and in vivo assays.The MEW scaffolds are functionalized with the selected peptide VLSTSFPPW (VW-9) with the highest activity in reducing pro-inflammatory cytokines and stimulating fibroblast proliferation, migration, and collagen production. The peptide was conjugated to the MEW scaffolds using carbodiimide (CDI) and thiol chemistry, with and without plasma treatment, as well as by directly mixing the peptide with the polymer before printing. The MEW scaffolds modified using CDI and thiol chemistry with plasma treatment showed improved fibroblast and macrophage penetration and adhesion, as well as increased cell proliferation and superior anti-inflammatory properties, compared to the other groups. When applied to full-thickness excisional wounds in rats, the peptide-modified MEW scaffold significantly enhanced the healing process compared to controls (p < 0.05). This study provides proof of concept for using yeast-derived peptides to functionalize biomaterials for skin wound healing.

Bioprinting of structurally organized meniscal tissue within anisotropic melt electrowritten scaffolds.

The meniscus is characterised by an anisotropic collagen fibre network which is integral to its biomechanical functionality. The engineering of structurally organized meniscal grafts that mimic the anisotropy of the native tissue remains a significant challenge. In this study, inkjet bioprinting was used to deposit a cell-laden bioink into additively manufactured scaffolds of differing architectures to engineer fibrocartilage grafts with user defined collagen architectures. Polymeric scaffolds consisting of guiding fibre networks with varying aspect ratios (1:1; 1:4; 1:16) were produced using either fused deposition modelling (FDM) or melt electrowriting (MEW), resulting in scaffolds with different internal architectures and fibre diameters. Scaffold architecture was found to influence the spatial organization of the collagen network laid down by the jetted cells, with higher aspect ratios (1:4 and 1:16) supporting the formation of structurally anisotropic tissues. The MEW scaffolds supported the development of a fibrocartilaginous tissue with compressive mechanical properties similar to that of native meniscus, while the anisotropic tensile properties of these constructs could be tuned by altering the fibre network aspect ratio. This MEW framework was then used to generate scaffolds with spatially distinct fibre patterns, which in turn supported the development of heterogenous tissues consisting of isotropic and anisotropic collagen networks. Such bioprinted tissues could potentially form the basis of new treatment options for damaged and diseased meniscal tissue. STATEMENT OF SIGNIFICANCE: This study describes a multiple tool biofabrication strategy which enables the engineering of spatially organized fibrocartilage tissues. The architecture of MEW scaffolds can be tailored to not only modulate the directionality of the collagen fibres laid down by cells, but also to tune the anisotropic tensile mechanical properties of the resulting constructs, thereby enabling the engineering of biomimetic meniscal-like tissues. Furthermore, the inherent flexibility of MEW enables the development of zonally defined and potentially patient-specific implants.

Composite Graded Melt Electrowritten Scaffolds for Regeneration of the Periodontal Ligament-to-Bone Interface.

Periodontitis is a ubiquitous chronic inflammatory, bacteria-triggered oral disease affecting the adult population. If left untreated, periodontitis can lead to severe tissue destruction, eventually resulting in tooth loss. Despite previous efforts in clinically managing the disease, therapeutic strategies are still lacking. Herein, melt electrowriting (MEW) is utilized to develop a compositionally and structurally tailored graded scaffold for regeneration of the periodontal ligament-to-bone interface. The composite scaffolds, consisting of fibers of polycaprolactone (PCL) and fibers of PCL-containing magnesium phosphate (MgP) were fabricated using MEW. To maximize the bond between bone (MgP) and ligament (PCL) regions, we evaluated two different fiber architectures in the interface area. These were a crosshatch pattern at a 0/90° angle and a random pattern. MgP fibrous scaffolds were able to promote in vitro bone formation even in culture media devoid of osteogenic supplements. Mechanical properties after MgP incorporation resulted in an increase of the elastic modulus and yield stress of the scaffolds, and fiber orientation in the interfacial zone affected the interfacial toughness. Composite graded MEW scaffolds enhanced bone fill when they were implanted in an in vivo periodontal fenestration defect model in rats. The presence of an interfacial zone allows coordinated regeneration of multitissues, as indicated by higher expression of bone, ligament, and cementoblastic markers compared to empty defects. Collectively, MEW-fabricated scaffolds having compositionally and structurally tailored zones exhibit a good mimicry of the periodontal complex, with excellent regenerative capacity and great potential as a defect-specific treatment strategy.