Mediolateral Angle Research Articles

Quantitative Analysis of the Supraorbital, Transorbital Microscopic, and Transorbital Neuroendoscopic Approaches to the Anterior Skull Base and Paramedian Vasculature

Abstract Objectives Our objective was to compare transorbital neuroendoscopic surgery (TONES) with open craniotomy and analyze the effect of visualization technology on surgical freedom. Design Anatomic dissections included supraorbital craniotomy (SOC), transorbital microscopic surgery (TMS), and TONES. Setting The study was performed in a neurosurgical anatomy laboratory. Participants Neurosurgeons dissecting cadaveric specimens were included in the study. Main Outcome Measures Morphometric analysis of cranial nerve (CN) accessible lengths, frontal lobe base area of exposure, and craniocaudal and mediolateral angle of attack and volume of surgical freedom (VSF) of the paraclinoid internal carotid artery (ICA), terminal ICA, and anterior communicating artery (ACoA). Results The mean (standard deviation [SD]) frontal lobe base parenchymal exposures for SOC, TMS, and TONES were 955.4 (261.7) mm2, 846.2 (249.9) mm2, and 944.7 (158.8) mm2, respectively. Access to distal vasculature was hindered when using TMS and TONES. Multivariate analysis estimated that accessing the paraclinoid ICA with SOC would provide an 11.2- mm3 increase in normalized volume (NV) compared with transorbital corridors (p < 0.001). There was no difference between the three approaches for ipsilateral terminal ICA VSF (p = 0.71). Compared with TONES, TMS provided more access to the terminal ICA. For the ACoA, SOC produced the greatest access corridor maneuverability (mean [SD] NV: 15.6 [5.6] mm3 for SOC, 13.7 [4.4] mm3 for TMS, and 7.2 [3.5] mm3 for TONES; p = 0.01). Conclusion SOC provides superior surgical freedom for targets that require more lateral maneuverability, but the transorbital corridor is an option for accessing the frontal lobe base and terminal ICA. Instrument freedom differs quantifiably between the microscope and endoscope. A combined visualization strategy is optimal for the transorbital corridor.

The biportal transorbital approach: quantitative comparison of the anterior subfrontal craniotomy, bilateral transorbital endoscopic, and microscopic approaches.

The aim of this study was to assess the surgical use and applicability of a biportal bitransorbital approach. Single-portal transorbital and combined transorbital transnasal approaches have been used in clinical practice, but no study has assessed the surgical use and applicability of a biportal bitransorbital approach. Ten cadaver specimens underwent midline anterior subfrontal (ASub), bilateral transorbital microsurgery (bTMS), and bilateral transorbital neuroendoscopic surgery (bTONES) approaches. Morphometric analyses included the length of the bilateral cranial nerves I and II, the optic tract, and A1; the area of exposure of the anterior cranial fossa floor; craniocaudal and mediolateral angles of attack (AOAs); and volume of surgical freedom (VSF; maximal available working volume for a specific surgical corridor and surgical target structure normalized to a height of 10 mm) of the bilateral paraclinoid internal carotid arteries (ICAs), bilateral terminal ICAs, and anterior communicating artery (ACoA). Analyses were conducted to determine whether the biportal approach was associated with greater instrument freedom. The bTMS and bTONES approaches provided limited access to the bilateral A1 segments and the ACoA, which were inaccessible in 30% (bTMS) and 60% (bTONES) of exposures. The average total frontal lobe area of exposure (AOE) was 1648.4 mm2 (range 1516.6-1958.8 mm2) for ASub, 1658.9 mm2 (1274.6-1988.2 mm2) for bTMS, and 1914.9 mm2 (1834.2-2014.2 mm2) for bTONES exposures, with no statistically significant superiority between any of the 3 approaches (p = 0.28). The bTMS and bTONES approaches were significantly associated with decreases of 8.7 mm3 normalized volume (p = 0.005) and 14.3 mm3 normalized volume (p < 0.001) for VSF of the right paraclinoid ICA compared with the ASub approach. No statistically significant difference in surgical freedom was noted between all 3 approaches when targeting the bilateral terminal ICA. The bTONES approach was significantly associated with a decrease of 105% in the (log) VSF of the ACoA compared with the ASub (p = 0.009). Although the biportal approach is intended to improve maneuverability within these minimally invasive approaches, these results illustrate the pertinent issue of surgical corridor crowding and the importance of surgical trajectory planning. A biportal transorbital approach provides improved visualization but does not improve surgical freedom. Furthermore, although it affords impressive anterior cranial fossa AOE, it is unsuitable for addressing midline lesions because the preserved orbital rim restricts lateral movement. Further comparative studies will elucidate whether a combined transorbital transnasal route is preferable to minimize skull base destruction and maximize instrument access.

Characteristics and evaluation of C1 posterior arch variation for transpedicular screw placement between patients with and without basilar invagination.

C1 transpedicular screw (C1TS) placement provided satisfactory pullout resistance and 3D stability, but its application might be limited in patients with basilar invagination (BI) due to the high incidences of the atlas anomaly and vertebral artery (VA) variation. However, no study has explored the classifications of C1 posterior arch variations and investigated their indications and ideal insertion trajectories for C1TS in BI. To investigate the bony and surrounding arterial characteristics of the atlas, classify posterior arch variations, identify indications for C1TS, evaluate ideal insertion trajectories for C1TS in BI patients without atlas occipitalization (AO), and compare them with those without BI and AO as control. A total of 130 non-AO patients with and without BI (52 patients and 78 patients, respectively) from two medical centers were included at a 1:1.5 ratio. The posterior arch variations were assessed using a modified C1 morphological classification. Comparisons regarding the bony and surrounding arterial characteristics, morphological classification distributions, and ideal insertion trajectories between BI and control groups were performed. The subgroup analyses based on different morphological classifications were also conducted. In addition, the factors possibly affecting the insertion parameters were investigated using multiple linear regression analyses. The BI group was associated with significantly smaller lateral mass height and width, sagittal length of posterior arch, pedicle height, vertical height of posterior arch, and distance between VA and VA groove (VAG) than control group. Four types of posterior arch variations with indications for different screw placement techniques were classified; Classifications I and II were suitable for C1TS. The BI cohort showed a significantly lower rate of Classification I than the control cohort. In the BI group, the subgroup of Classification I had significantly larger distance between the insertion point (IP) and inferior aspect of the posterior arch. In addition, it had the narrowest width along ideal screw trajectory, but a significantly more lateral ideal mediolateral angle than the subgroup of Classification II. Multiple linear regression indicated that the cephalad angle was significantly associated with the diagnosis of BI (B = 3.708, P < 0.001) and sagittal diameter of C1 (B = 3.417, P = 0.027); the ideal mediolateral angle was significantly associated with BMI (B = 0.264, P = 0.031), sagittal diameter of C1 (B = - 4.559, P = 0.002), and pedicle height (B = - 2.317, P < 0.001); the distance between the IP and inferior aspects of posterior arch was significantly associated with age (B = - 0.002, P = 0.035), BMI (B = - 0.007, P = 0.028), sagittal length of posterior arch (B = - 0.187, P = 0.032), pedicle height (B = - 0.392, P < 0.001), and middle and lower parts of posterior arch (B = 0.862, P < 0.001). The incidence of posterior arch variation in BI patients without AO was remarkably higher than that in control patients. The insertion parameters of posterior screws were different between the morphological classification types in BI and control groups. The distance between VA V3 segments and VAG in BI cohort was substantially smaller than that in control cohort. Preoperative individual 3D computed tomography (CT), CT angiography and intraoperative navigation are recommended for BI patients receiving posterior screw placement.

Improving puncture accuracy in percutaneous CT-guided needle insertion with wireless inertial measurement unit: a phantom study.

A novel method applying inertial measurement units (IMUs) was developed to assist CT-guided puncture, which enables real-time displays of planned and actual needle trajectories. The method was compared with freehand and laser protractor-assisted methods. The phantom study was performed by three operators with 8, 2, and 0years of experience in CT-guided procedure conducted five consecutive needle placements for three target groups using three methods (freehand, laser protractor-assisted, or IMU-assisted method). The endpoints included mediolateral angle error and caudocranial angle error of the first pass, the procedure time, the total number of needle passes, and the radiation dose. There was a significant difference in the number of needle passes (IMU 1.2 ± 0.42, laser protractor 2.9 ± 1.6, freehand 3.6 ± 2.0 time, p < 0.001), the procedure time (IMU 3.0 ± 1.2, laser protractor 6.4 ± 2.9, freehand 6.2 ± 3.1min, p < 0.001), the mediolateral angle error of the first pass (IMU 1.4 ± 1.2, laser protractor 1.6 ± 1.3, freehand 3.7 ± 2.5 degree, p < 0.001), the caudocranial angle error of the first pass (IMU 1.2 ± 1.2, laser protractor 5.3 ± 4.7, freehand 3.9 ± 3.1 degree, p < 0.001), and the radiation dose (IMU 250.5 ± 74.1, laser protractor 484.6 ± 260.2, freehand 561.4 ± 339.8mGy-cm, p < 0.001) among three CT-guided needle insertion methods. The wireless IMU improves the angle accuracy and speed of CT-guided needle punctures as compared with laser protractor guidance and freehand techniques. • The IMU-assisted method showed a significant decrease in the number of needle passes (IMU 1.2 ± 0.42, laser protractor 2.9 ± 1.6, freehand 3.6 ± 2.0 time, p < 0.001). • The IMU-assisted method showed a significant decrease in the procedure time (IMU 3.0 ± 1.2, laser protractor 6.4 ± 2.9, freehand 6.2 ± 3.1min, p < 0.001). • The IMU-assisted method showed a significant decrease in the mediolateral angle error of the first pass and the caudocranial angle error of the first pass.

Three-dimensional morphologic features of Asian atypical femur and clinical implications of cephalomedullary nail fixation: Computational measurement at actual size

Purpose(1) To analyze three-dimensional (3D) morphologic features of atypical femur fracture at actual size without projection error; and (2) to provide clinical implications of cephalomedullary nail (CMN) fixation by separating the medullary canal and the cortex. Materials and methodsFifty-nine atypical femurs (opposite non-fractured femurs) were reconstructed as 3D models with medullary canal by importing CT data into Mimics® software. A reference line was drawn from the tip of the greater trochanter to the center of the intercondylar notch and used for classifying bowing grade according to the centerline of medulla. Proximal and distal straight lines (length of 60 mm, diameter of 1 mm) were placed in the centerline of medulla. Acute angles between the two straight lines were measured as lateral and anterior bowing. The acute angle by straight line and reference line was measured as proximal and distal bowing in both AP and lateral view. The diameter of curve (DOC) of medulla along the posterior border was measured. ResultsThe anterior bowing of all femur on lateral view was an average of 13.82° (range, 6.2°–31.1°, SD 3.91), and the values of proximal and distal anterior bowing were an average of 7.82° (range, 2.7°-14.3°, SD 2.23) and 6.0° (range, 2.2°-16.8°, SD 2.31), respectively. The lateral bowing of all femur on AP view was an average of 5.49° (range, 0.1°–17.3°, SD 4.48), and the values of proximal and distal anterior bowing were an average of 3.64° (range, 0.1°-11.3°, SD 2.70) and 2.48° (range, 0-7.4°, SD 1.98), respectively. The medullary canal was changed to be straightened and more bowed anteriorly. Concerning the lateral bowing grade of entire diaphysis, it was grade -I for 15 femurs, grade 0 for 21 femurs, grade I for nine femurs, grade II for five femurs, and grade III for nine femurs. Regarding anterior bowing grade, it was grade II for 14 femurs and grade III for 45 femurs. The average diameter of medullary canal was 1276.3 ± 232.25 mm. ConclusionAsian atypical femur had three morphologic features: (1) straightened medullary canal, (2) positive values of lateral bowing, and (3) significantly increased ante-curvature of medullary canal. Considering that conventional CMN had about 4° of mediolateral angle, the disparity between implant and medullary canal might be clear. Thus, new nail design for Asian atypical femur that could increase the radius of curve (ROC) but decrease the mediolateral angle needs to be introduced.

Ideal entry point and trajectory for C2 pedicle screw placement in basilar invagination patients with high-riding vertebral artery based on 3D computed tomography

BACKGROUNDC2 pedicle screw placement in patients with basilar invagination (BI) is fraught with risks because of a high incidence of anatomical variations and high-riding vertebral artery (HRVA). However, no study can be found in the literature that attempted to identify the ideal entry point and trajectory through the C2 pedicle in BI patients with HRVA. PURPOSETo investigate the parameters of ideal entry point and trajectory for C2 pedicle screw placement in BI patients with HRVA and compare them with those in BI patients without HRVA and patients without BI as control. These parameters would serve as a guide to pedicle screw placement. STUDY DESIGNA retrospective comparative study. PATIENT SAMPLEA total of 396 patients (198 consecutive BI patients and 198 matched patients without BI as control) and 792 unilateral pedicles from April 2017 to October 2021 at two medical centers were included. OUTCOME MEASURESThe insertion parameters of mediolateral angle, surface distance, cephalad angle, and vertical distance from the superior border of the lamina were the primary outcome measures for the reference of C2 pedicle screw placement. Furthermore, factors that affect the primary insertion parameters were assessed via multiple linear regression analyses. METHODAccording to the diagnosis of BI and HRVA, the unilateral pedicles were assigned into HRVA of BI, non-HRVA of BI, HRVA of control, and non-HRVA of control groups. Subgroup analyses based on Goel types A and B were also performed. Moreover, vertebral artery (VA) anomalies that might result in potentially serious complications were identified and systematically compared. RESULTSThe measurements of insertion parameters in BI patients with HRVA indicated a mean mediolateral angle of 27.42°, a mean cephalad angle of 43.02°, a mean surface distance of 9.74 mm, and a mean vertical distance from the superior border of the lamina of 3.85 mm. Compared with that in BI patients without HRVA, the measurements suggested that the entry point in BI patients with HRVA should be shifted upward by 0.38 mm and the trajectory should be angled cephalad by 6.05° and medially by 4.78°. In the control group, changes in the insertion parameters between HRVA and non-HRVA showed a similar trend to the BI group. Multiple linear regression showed that mediolateral angle was significantly associated with the male gender (B=−0.930, p=.017) and the diagnoses of HRVA (B=6.964, p<.001), Goel type A (B=−1.656, p=.003), and Goel type B (B=0.981, p=.030). Moreover, cephalad angle was significantly associated with the length of lateral mass (B=−0.319, p=.001) and the diagnoses of HRVA (B=3.254, p<.001) and Goel type A (B=6.924, p<.001). The VA anomalies were significantly higher in the BI group than in the control group. CONCLUSIONSThe insertion parameters of the ideal entry point and trajectory for C2 screw placement in BI patients with HRVA were remarkably different from those of non-HRVA of BI, HRVA of control, and non-HRVA of control cohorts. Preoperative 3D computed tomography (CT) and CT angiography are highly recommended in such patients to improve intraoperative safety and reduce postoperative complications.

Computational simulation of cephalomedullary nailing in the osteoporotic Asian femur and clinical implications

PurposeTo assess the conformity of PFNA-II® and introduce clinical implications of new cephalomedullary nail (CMN) by analyzing three-dimensional (3D) modeling with virtual implantation at the actual size. Materials and methodsThirty-four patients (average age; 79 years, range 68–94 years) who sustained the intertrochanteric fracture of the femur were enrolled in the present study. After importing into Mimics® software, the intact femurs on the opposite side were selected as cropping areas to reconstruct the 3D femur model with the medullary canal. PFNA-II® and new CMNs (lateral angle 0° and 2°, CCD angle 130°; CMN0° and CMN2°) were processed at the actual size and ideally placed in the proximal femur using Mimics® software. The virtual entry point (EP), nail conformity, and anatomical relationships with the adjacent structures were assessed. ResultsThe virtual EP of PFNA-II® was placed along the cervico-trochanteric (CT) junction in the posterior half around trochanteric fossa and always medial to the tip of greater trochanter (GT). There were six abutments in PFNA-II® models, one impingement in CMN 0°, and no impingement in CMN 2°. All the models with cortical abutment showed increased anterior and lateral bowing of the proximal shaft owing to age-dependent changes. Compared with PFNA-II®, with a decreasing tendency on the mediolateral angle of new CMNs, the virtual EP shifted to the medial and anterior side towards the CT junction. By simulating the intentional positioning in the media-to-lateral direction, the abutments in the PFNA-II® model could not be avoided. Furthermore, the lag screw of CMN 0° was placed ideally at the center or inferior side of the femoral head < 10 mm in any direction without a cortical abutment. ConclusionTo avoid cortical abutment of CMN in the Asian geriatric femur, the virtual EP would be technically placed in the medial to the GT tip, and the implant design should be changed to decrease the mediolateral angle.

Morphological variations in proximal femoral nails in Indian scenario and its clinical application

Background: There is an increasing trend of use of cephalomedullary nail for the management of both stable and unstable intertrochanteric and subtrochanteric femoral fractures. Various western and Indian proximal femoral nails with different morphologies are available in Indian market that sometimes creates confusion amongst orthopedic surgeons about which nail to be preferred in different clinical scenarios for accurate outcomes. Material and Methods: Ten different types of long femoral nails with 10 mm diameter (5 Western and 5 Indian) available in Indian market were taken and the morphology of these were studied and compared for 9 parameters. Results: A lot of variation was seen amongst the Indian nails and western nails in proximal diameter, shape of proximal part of nail, distance of lag screw from tip, distance at which actual size of nail becomes 10mm, M-L angle (medio lateral angle), shape of nail shaft, configuration of distal screws, morphology of neck screw and centrum-collum –diaphyseal (CCD) angle. Conclusion: Design of a nail may prove to be superior in some type of patients and fractures but may not be suitable for others. Pre-operative templating is must and surgeons need to consider all the factors in unison while deciding the type of nail to be used. Keywords: Intertrochantric fractures, Proximal femoral nail.

Augmented Reality Navigated Sacral-Alar-Iliac Screw Insertion

Sacral-alar-iliac (SAI) screws are increasingly used for lumbo-pelvic fixation procedures. Insertion of SAI screws is technically challenging, and surgeons often rely on costly and time-consuming navigation systems. We investigated the accuracy and precision of an augmented reality (AR)-based and commercially available head-mounted device requiring minimal infrastructure. A pelvic sawbone model served to drill pilot holes of 80 SAI screw trajectories by 2 surgeons, randomly either freehand (FH) without any kind of navigation or with AR navigation. The number of primary pilot hole perforations, simulated screw perforation, minimal axis/outer cortical wall distance, true sagittal cranio-caudal inclination angle (tSCCIA), true axial medio-lateral angle, and maximal screw length (MSL) were measured and compared to predefined optimal values. In total, 1/40 (2.5%) of AR-navigated screw hole trajectories showed a perforation before passing the inferior gluteal line compared to 24/40 (60%) of FH screw hole trajectories (P < .05). The differences between FH- and AR-guided holes compared to optimal values were significant for tSCCIA with -10.8° ± 11.77° and MSL -65.29 ± 15 mm vs 55.04 ± 6.76 mm (P = .001). In this study, the additional anatomical information provided by the AR headset and the superimposed operative plan improved the precision of drilling pilot holes for SAI screws in a laboratory setting compared to the conventional FH technique. Further technical development and validation studies are currently being performed to investigate potential clinical benefits of the AR-based navigation approach described here. 4.

Effect of pedicle screw angles on the fracture risk of the human vertebra: A patient-specific computational model

The assessment of a human vertebra’s stability after a screws fixation procedure and its fracture risk is still an open clinical problem. The accurate evaluation of fracture risk requires that all fracture mechanical determinants such as geometry, constitutive behavior, loading modes, and screws angulation are accounted for, which requires biomechanics-based analyses. As such, in the present work we investigate the effect of pedicle screws angulation on a patient-specific model of non osteoporotic lumbar vertebra, derived from clinical CT images. We propose a novel computational approach of fracture analysis and compare the effects of fixation stability in the lumbar spine. We considered a CT-based three-dimensional FE model of bilaterally instrumented L4 vertebra virtually implanting pedicle screws according to clinical guidelines. Nine screws trajectories were selected combining three craniocaudal and mediolateral angles, thus investigated through a parametric computational analysis. Bone was modeled as an elastic material with element-wise inhomogeneous properties fine-tuned on CT data. We implemented a custom algorithm to identify the thin cortical layer correctly from CT images ensuring reliable material properties in the computational model. Physiological motion (i.e., flexion, extension, axial rotation, lateral bending) was further accomplished by simultaneously loading the vertebra and the implant. We simulated local progressive damage of the bone by using a quasi-static force-driven incremental approach and considering a stress-based fracture criterion. Ductile-like and brittle-like fractures were found. Statistical analyses show significant differences comparing screws trajectories and averaging the results among six loading modes. In particular, we identified the caudomedial trajectory as the least critical case, thus safer from a clinical perspective. Instead, medial and craniolaterally oriented screws entailed higher peak and average stresses, though no statistical evidence classified such loads as the most critical scenarios. A quantitative validation procedure will be required in the future to translate our findings into clinical practice. Besides, to apply the results to the target osteoporotic population, new studies will be needed, including a specimen from an osteoporotic patient and the effect of osteoporosis on the constitutive model of bone.

CT based measurement of anatomical dimensions of femur and its relevance in nail designs for proximal femoral fractures

IntroductionThe purpose of this study was to obtain computed tomography (CT) based measurements of femoral dimensions in adults, to identify its relevance with intramedullary nails used in the management of proximal femur fractures and to suggest a best fitting implant dimensions to our population. To best of our knowledge our study would be first to compile different CT based dimension in single study. MethodsIn our retrospective study of 50 femurs, CT based femoral dimensions measured in standardized cuts and compared with previous studies and commonly available proximal femur intramedullary devices. Results68.4 was the mean age in our study, neck shaft angle (NSA) was 127.2±5.20, anteversion 11.2±7.40, endosteal isthmus diameter was 11.9 ± 1.7 mm, anterior radius of curvature (ROC) was 116.8 ± 20 mm, horizontal femoral offset 37.5 ± 4.6 mm, medio-lateral angle 7.8±1.60, with good inter and intra observer correlation. Femoral length and neck width was positively correlated to head diameter, horizontal femoral offset with medio-lateral (ML) angle. One of the 50 femur studied had the parameters in the range of available implant and could match appropriately. ConclusionCT based dimensions in our population is different from other population. Based on this study, a design modification of nails used in present day management of proximal femur fractures has been recommended.

The three-axial gyroscope sensor detects the turning point between opening and closing phases of chewing.

Most devices measuring the kinematics of masticatory function are cumbersome to setup and not portable. Data collection would be facilitated, particularly in the elderly, if the device used for the objective measurement of mastication was easily transportable and simple to setup. Accelerometers and gyroscope sensors are lightweight and portable and may be useful alternatives. The definition of the turning point between the opening and closing phases of chewing is important for studies of associations between muscle activity and effects of perturbations. Measures of the mediolateral angle (specifically, the mandibular tilt from the lateral view) allow the detection of the turning point between the opening and closing phases. The aim was to determine whether a three‐axial gyroscope sensor can detect the turning point between opening and closing phases of chewing. Fourteen asymptomatic participants chewed gum while the output was recorded from a three‐axial gyroscope sensor (Seiko Epson, Japan) attached to the chin and a 6 degree‐of‐freedom electromagnetic jaw‐tracking device (Pollhemus, USA). Bland–Altman plots were used to assess the matching of the recordings made by the three‐axial gyroscope sensor and the jaw‐tracking device. The turning points between the opening and closing phases of chewing matched closely when recorded by a jaw‐tracking device and when using a three‐axial gyroscope sensor. A three‐axial gyroscope sensor can validly detect the turning point between the opening and closing phases during chewing of gum.

Quantitative Analysis of Surgical Working Space During Endoscopic Skull Base Surgery

Objectives Selective dissection of intranasal anatomy may improve visualization and maneuverability at the skull base. We aimed to quantify the dimensions of working space and angles achieved following sequential removal of intranasal structures using an endoscopic transphenoidal approach to the skull base. Methods Cone beam computed tomography scans of four cadaveric heads were obtained for registration of an optical tracking system. Each head was sequentially dissected: (1) sphenoidotomy and limited posterior septectomy, (2) unilateral partial middle turbinectomy, (3) bilateral partial middle turbinectomy, and (4) wide posterior septectomy. The maximal craniocaudal and mediolateral distance (mm) and angle (degrees) reached were calculated at the sphenoid face and sella. Data were analyzed using descriptive statistics and tests of statistical significance. The significance level was set at p ≤ 0.05. Results A significant improvement in both dimensions of working space was observed with each stage of dissection at the level of the sphenoid face. Maximal working space was achieved following bilateral middle turbinectomy and wide posterior septectomy with a 38 and 29% increase in working space in the mediolateral and craniocaudal dimensions, respectively. The largest stepwise increase in working space was observed with unilateral middle turbinectomy (mediolateral: 24 ± 3 mm and craniocaudal: 20 ± 3 mm). A trend toward improved degrees of visualization was observed with each stage of dissection but was not statistically significant. Conclusion Approaches to the skull base can be enhanced by selective unilateral/bilateral partial middle turbinectomy and posterior septectomy being performed to improve visualization and maximize surgical working freedom.

Quantitative Endoscopic Comparison of Contralateral Interhemispheric Transprecuneus and Supracerebellar Transtentorial Transcollateral Sulcus Approaches to the Atrium

The contralateral interhemispheric transprecuneus approach (CITP) and the supracerebellar transtentorial transcollateral sulcus approach (STTC) are 2 novel approaches to access the atrium of the lateral ventricle. We quantitatively compared the 2 approaches. Both approaches were performed in 6 sides of fixed and color-injected cadaver heads. We predefined the 6 targets in the atrium for measurement and standardization of the approaches. Using a navigation system, we quantitatively measured the working distance, cortical transgression, angle of attack, area of exposure, and surgical freedom. The distances from the craniotomy edge to the posterior pole of the choroid plexus of the CITP (mean ± standard deviation, 67 ± 5.3 mm) and STTC (mean, 57 ± 4.0 mm) differed significantly (P < 0.01). Cortical transgression with the CITP (mean, 27 ± 2.8 mm) was significantly greater than that with the STTC (mean, 21 ± 6.7 mm; P= 0.03). The CITP showed a significantly wider rostrocaudal angle of attack than that with the STTC (P= 0.01). The STTC showed a significantly wider mediolateral angle (P < 0.01). No significant difference was found for surgical freedom of any target except for point E, for which the CITP was larger. The exposure area did not differ significantly between the 2 approaches (P= 0.07). Both approaches were feasible for accessing the atrium. The STTC provided a shorter working distance and wider mediolateral angle, CITP provided a wider rostrocaudal angle of attack and better exposure and maneuverability to the anterior and superior atrium. In contrast, the STTC was more favorable for the inferior and posterior regions.

A multi-centre quality improvement project to reduce the incidence of obstetric anal sphincter injury (OASI): study protocol

BackgroundThird and fourth degree perineal tears, or obstetric anal sphincter injuries (OASI), sustained during childbirth can result in anal incontinence and psychosocial problems which require ongoing treatment. Within the English National Health System (NHS) reported rates of OASI have gradually increased. In response, a care bundle was developed incorporating four elements: 1) antenatal information to women, 2) manual perineal protection during all vaginal births, 3) episiotomy to be performed with a 60° mediolateral angle at crowning (when clinically indicated) and 4) perineal examination (including per rectum) after childbirth. Implementation of the OASI Care Bundle is aided by a skills development module and an awareness campaign. The project is a collaboration between two national professional bodies, an NHS hospital trust and an academic institution.MethodsImplementation of the OASI Care Bundle will be evaluated using a stepped-wedge design. From January 2017 sixteen maternity units across England, Wales and Scotland will participate in the study over a 15-month period, with sequential roll-out of the intervention in four blocks (regions) of four units. The primary clinical outcome is OASI rate. Regression analysis will adjust for differences in organisational characteristics and obstetric risk factors in women who gave birth before and after implementation of the care bundle. Focus group discussions and in-depth interviews with clinicians will evaluate the feasibility of integrating the care bundle into routine practice. Interviews with women will explore the acceptability of the intervention.DiscussionThis protocol outlines the evaluation of our quality improvement project which aims to prevent OASI using a bundle of evidence-based interventions that are each widely used in practice. The OASI project aims to 1) standardise practice to prevent OASI in a way that is acceptable to clinicians and women and 2) identify the barriers and enablers associated with upscaling interventions within maternity units. If found to be effective, feasible and acceptable, the OASI Care Bundle will be shared with a range of audiences using the communication channels available to the professional bodies.Trial registrationThe OASI Project was retrospectively registered on the ISCTRN12143325 database date assigned 03/10/2017.

Guiding Device for the Patellar Cut in Total Knee Arthroplasty: Design and Validation.

An incorrect cut of the patella (kneecap) during total knee arthroplasty, affects the thickness in different quadrants of the patella, leading to pain and poor function. Because of the disadvantages of existing devices, many surgeons choose to perform the cut freehand. Given this mistrust of existing devices, a quick, but accurate, method is needed that guides the cut, without constraining the surgeon. A novel device is described that allows the surgeon to mark a line at the desired cutting plane parallel to the front (anterior) surface using a cautery tool, remove the device, and then align the saw guide, reamer, or freehand saw with the marked line to cut the patella. The device was tested on 36 artificial patellae, custom-molded from two shapes considered easier and harder to resect accurately, and eight paired cadaveric specimens, each in comparison to the conventional saw guide technique. The mediolateral angle, superoinferior angle, difference from intended thickness, and time were comparable or better for the new device. Addressing the remaining outliers should be possible through additional design changes. Use of this guidance device has the potential to improve patellar resection accuracy, as well as provide training to residents and a double-check and feedback tool for expert surgeons.

Functional Outcome Analysis of Trochanteric Fractures Treated with Proximal Femoral Nail Antirotation II

ABSTRACT Background The treatment of intertrochanteric fractures continues to be a challenge in orthopedic trauma, especially in geriatric population. Among the various generations of cephalomedullary nails, proximal femoral nail antirotation II (PFN A-II) is specifically designed for Asian population, with helical blade, modified proximal diameter, and modified mediolateral angle. Aim The aim of this study was to analyze the functional outcome of patients treated with PFN A-II using Harris hip score, at our institution. The study included 20 patients (11 males and 9 females). Results Among the 20 patients included in the study, outcome was excellent in 5, good in 11, fair in 4, and this is based on Harris hip score with the minimum follow-up period being 6 months. The average union time was 13 weeks, average Harris hip score was 82.3. An abductor lurch was reported in one patient, postoperative thigh pain in two patients, infection in three patients, and bedsore in three patients. How to cite this article Kumar GV, Amarnath R, Kumar SS, et al. Functional Outcome Analysis of Trochanteric Fractures Treated with Proximal Femoral Nail Antirotation II. J Orth Joint Surg 2019;1(1):22–26.

자세안정화를 위한 복합중재운동이 특발성 척추측만 청소년의 비대칭 개선 효과에 미치는 영향

The purpose of this study was to investigate the effect of asymmetry improving on complex intervention exercise for posture stabilization of adolescent idiopathic scoliosis. A total of 41 female elementary scoliosis students participated in the purposive sampling study. Those was used for 3 dimension structural analysis in order to analyze the spinal scoliosis and body alignment. For this study, the subjects were performed for 60 minutes per day and 3-times a week during 12-weeks for complex intervention exercise program, and paired t-test was performed at the 0.05 level of significance. The results of spine structural analysis showed that the torsion angle and rotation angle of the pelvis and the side angle of the spine were statistically significant after exercise compared to before exercise. There was no statistical significance in the trunk elements, but the asymmetry factor after exercise was more relaxed than in the anteroposterior and mediolateral tilt angle and torsion angle. Therefore, the asymmetry factor was relaxed after exercise and showed positive tendency in static standing.

Erratum: Highly Variable Femoral Morphology in Osteoarthritic Chinese: Are Prostheses Today Sufficiently Suitable?

We aimed to retrospectively investigate the morphology of the resected surfaces of femurs in Chinese patients who underwent total knee arthroplasty (TKA) and to assess the suitability of contemporary femoral components. Measurements on three-dimensional reconstruction after virtual bone cutting were performed on 142 knees from Chinese TKA candidates. The anteroposterior (AP) and mediolateral (ML) dimensions, aspect ratio (ML/AP), and posterior condylar angle (PCA) were measured in the axial plane; the height and length of medial and lateral anterior condyles and the maximal width of the anterior condyles were measured in the frontal plane. Femurs were matched to the prosthesis with the closest AP size. The ML dimensions of femurs were compared with the ML dimensions of the prosthesis. The AP and ML dimensions were significantly larger in male knees (p

Coronal Multiplane Reconstructed Computed Tomography Image Determining Lateral Vertebral Notch-Referred Pedicle Screw Entry Point in Subaxial Cervical Spine: A Preclinical Study.

To evaluate feasibility of computed tomography (CT) coronal multiplane reconstruction image (CMRI) to determine subaxial cervical pedicle screw (PS) entry point and guide lateral vertebral notch (LVN)-referred technique for subaxial cervical PS insertion. Cervical CT scans were performed in 40 volunteers. PS entry point was determined by quantitating PS entry point related to LVN on CMRI. Pedicle mediolateral angle (α) and cephalocaudad angle (β) were also measured to guide the trajectory of PS insertion. Based on these quantitations, 12 human cadaveric subaxial cervical pedicles were inserted with PS referring to LVN. Cortical integrity of each pedicle was evaluated after dissecting the cadaveric vertebrae one by one and confirmed by radiography and CT. The cortical penetration and PS position were classified into 4 grades: 0 (excellent position), I(goodposition), II (fair position), and III (poor position). On CT CMRI, PS entry point was consistently located approximately 2.2 mm medial to LVN from C3 to C7 and approximately 1.4 mm lower to LVN from C3 to C6, but 1.2 mm higher at C7. Bilateral α angle and β angle showed substantial decrease from cranial to caudal. Cortical integrity of PS positions was excellent and good in 88.33%, fair in 8.33%, and poor in 3.33%. CMRI is reliable for determining subaxial cervical PS entry point. LVN is a consistent landmark for the notch-referred technique, which is a practical and easy to master technique for subaxial cervical spine PS insertion.