Mechanical Harvesting Research Articles

Corrigendum to “A pendulum based frequency-up conversion mechanism for vibrational energy harvesting in low-speed rotary structures”

Corrigendum to “A pendulum based frequency-up conversion mechanism for vibrational energy harvesting in low-speed rotary structures”

Design and Testing of an Electric Side-Mounted Cabbage Harvester

To address the limitations of current cabbage harvesters in China, which are often designed for a single variety and lack adaptability to different cabbage varieties, we developed an electric side-mounted cabbage harvester suitable for field operations in the Jiangsu region of China. This design is informed by the statistical analysis of the physical and agronomic parameters of major cabbage varieties. The harvester consists of key components, including an extraction device, a leaf-stripping device, a clamping and conveying device, and a root-cutting device. Powered by a 120 Ah direct current (DC) power source, it is capable of performing cabbage extraction, feeding, clamping, conveying, root cutting, and boxing in a single operation for three hours. Through theoretical analysis of the key components, specific parameters were determined, and field tests were conducted to verify the design. The results of the field experiments indicate that all components of the cabbage harvester operated effectively. Optimal performance was observed when the extraction roller speed was set between 100 and 110 RPM, the conveyor belt speed at 60 RPM, and the cutter speed between 160 and 220 RPM, resulting in a low cabbage harvest loss rate. The harvest loss rates from the three experiments were 11.3%, 13.3%, and 12%, respectively, which meets the mechanical harvesting requirements for cabbage.

Technical Feasibility and Economic Viability of Portable Limb Shaker in Apricot Harvesting at Union Territory of Ladakh, India

Traditional harvesting methods of apricot result in significant harvesting and post-harvest losses. This study aimed at designing a mechanical apricot harvesting net with limb shakers to reduce the losses and enhance harvesting efficiency in the Ladakh region of India. The physical characteristics of apricot in terms of sphericity, limb displacement, fruit detachment force and apparent stiffness were measured for designing an apricot harvesting net and selection of frequency for harvesting. The technical feasibility of a mechanical apricot harvester was tested for shaking frequency (7, 22 and 33 Hz), limb diameter (<3 cm, 3-6 cm and > 6 cm) and collecting material used (insect shade net, 95% shade net and 75% shade net). The economic assessment was carried out in terms of benefit-cost ratio, breakeven point and payback period. The responses of fruit removal percentage, harvesting efficiency, mechanical bruising percentage and harvesting loss were recorded. The optimization of parameters revealed at 23 Hz shaking frequency and 75% shade net collecting material resulted in 97.16% fruit removal, 11.24% mechanical bruising, 88.77% harvesting efficiency and 52.79g twig losses per 10 kg of fruit removal for each treatment. The cost economics of the mechanical apricot shaker and collecting net revealed an operating cost of Rs. 246.5 per hour, benefit-cost ratio of 1.15:1, breakeven point of 1270.4 quintals and payback period of 2132 hours. The study can be beneficial for reducing drudgery and income augmentation of apricot growers of Ladakh and Kargil region of India.

Mechanical Harvesting of Marginal Land and Agroforestry Field: New Insights from Safflower for Bio-Product Production

Considering the increase in market requests for bio-products, it is necessary to study the possibility of cultivating industrial crops in areas still untapped to extend the total cultivation surface, reducing land competition with food crops. With this aim in mind, we studied the harvesting performance and cost, and seed losses of Safflower (Carthamus tinctorius L.) cultivation during two growing seasons and in three different locations: (A) an agroforestry field, (B) a marginal field and (C) a dedicated field utilized as a control. The overall efficiency of the cultivation system was higher in location C in respect to the other two fields. The yield was 12–22% and 21–26% higher in location C compared to locations B and A, respectively, while seed losses were 40–33% and 28–50% lower in C compared to locations A and B, as well as the total harvesting costs, which were 45% and 31–35% lower in location C compared to locations A and B, respectively. Despite this, the results highlighted how the reduction in cultivation efficiency given by limiting factors was lower compared to that of other crops, highlighting the possibility of cultivating Safflower for bio-products’ production on alternative lands.

Research and Experimentation on Sparse–Dense Interphase Curved-Tooth Sorghum Threshing Technology

The high-speed development of the liquor industry brings sorghum demand, which is increasingly strong at the moment. Still, its harvesting mechanization level is low, and with the design of a longitudinal flow sparse and dense curved-teeth sorghum threshing technology, the harvester’s work quality is improved by the reduction of seed impurities. This article describes the working principle of the harvester, the overall distribution of threshing elements, and force analysis of the threshing aspects to determine the structure of the threshing elements. The orthogonal test was carried out, with a sparse–dense interphase threshing drum as the research object, selecting operating speed, threshing element bending angle, and threshing element mounting angle as the test factors, with the entrainment loss rate and the net threshing rate as the assessment indexes for the three-factor, three-level test, and the use of Design-Expert to establish a mathematical regression model between the factors and the two indicators, resulting in the following optimized parameters: when the operating speed is 1.0 m·s−1, the bending angle of the threshing element is 80°, and the mounting angle of the threshing element is 45°, the loss rate of entrainment is 1.89%, and the net threshing rate is 95.53%. The machine’s design indexes are in line with relevant national standards and can meet the demand for mechanized harvesting of sorghum.

Water collection through a directional leaf vein pattern by fast laser marker ablation of stainless-steel

Inspired by the natural water harvesting mechanisms of desert beetles, cactus thorns, and leaf veins, we designed a heterogeneous wettability surface with superhydrophilic pattern integrating leaf vein as the directional water transport main channel, attached capillary triangles as auxiliary channel plus a deep rough desorption channel on an overall superhydrophobic surface for an efficient water collection. A superhydrophilic surface was initially fabricated on the stainless steel disc by laser marker ablation allowing 1 μL droplet to spread completely to 0° within 0.12 seconds, followed by fluorine-containing coating transforming superhydrophilic surface to superhydrophobic one. Directional water transport patterns were then etched on the superhydrophobic surfaces by the secondary laser marker. The surface energy gradient and Laplace pressure induced by the pattern facilitated directional fast transport and efficient desorption of droplets, thus improving water collection efficiency. The enhancement mechanism of the water harvesting behavior for such surfaces was analyzed, with one focus on enhancing collection in hydrophobic regions with capillaries to reduce bouncing off loss and the other on improving balanced cycling of the collection process. At a fog flow rate of 1500ml/h and 20cm away from the fog outlet, the directional leaf vein-patterned 19.625cm2 sized surface demonstrated a fog water collection rate (WCR) of 5.6 Kg·m-2·h-1 and first drop collection at the 49th s, an impressively short time rarely reported. Compared to the superhydrophobic, superhydrophilic samples, and the reference, WCR increased by 180%, 62%, and 59%, respectively, and the first droplet collection time decreased by 73%, 46%, and 62%, respectively. This efficient water collection method has huge potential in arid regions.

Rod-type handheld hybrid nanogenerator for mechanical energy harvesting and self-powered speed sensing applications

Nanogenerators offer a promising solution for converting mechanical movements into electricity with significant implications for portable electronics. Herein, we propose a novel approach using magnesium (Mg)-doped zinc oxide (ZMO) nanoflakes (NFs) embedded in polydimethylsiloxane (PDMS) composite films, which serve as the negative tribo-layer in a triboelectric/piezoelectric hybrid nanogenerator (HNG) operating in contact-separation mode. The ZMO NFs, with an optimized Mg concentration for a high dielectric constant, are mixed into PDMS, and their concentration is further optimized to achieve the highest electrical output from the HNG. The optimized device generates a voltage, current, and power density of approximately 186 V, 5.23 μA, and 1.56 W/m2, respectively while also exhibiting high stability. The electricity generated by this HNG is successfully utilized to power commercial portable electronics. To further enhance its practicality, six similar HNGs were fabricated and integrated into a 3D printed structure, forming a rod-type handheld HNG (RTH-HNG). The energy-harvesting capability of the RTH-HNG is systematically investigated under applied external forces. Additionally, the speed-sensing ability of the RTH-HNG during hand-shaking motions is assessed, with the system demonstrating an accuracy of up to 94 % when compared to a commercially available infrared sensor. Moreover, the real-time vibrational energy harvesting capability of the RTH-HNG was demonstrated by attaching it to a bicycle. Therefore, the proposed RTH-HNG can function not only as a mechanical energy harvester for powering small portable electronics but also as a self-sufficient speed sensor for various real-time applications.

QTL mapping and omics analysis to identify genes controlling kernel dehydration in maize.

This study mapped and screened three candidate genes related to kernel dehydration in maize. The slow development rate of maize kernels during later stages leads to high kernel moisture content at harvest, posing a challenge for mechanized maize harvesting in China. This study utilized a recombinant inbred line population derived from Zheng 58 (slow dehydration) and PH6WC (fast dehydration) as parents. After four years of trait investigation and analysis, 25 quantitative trait loci (QTLs) associated with kernel dehydration rate and moisture content were identified, with six QTLs showing a significant contribution value exceeding 10% in the phenotype. Furthermore, a comparison was made between the QTLs identified in this study and those from previous research on maize kernel moisture content and dehydration rate, followed by screening through the omics analysis of the parental lines. Three candidate genes related to kernel dehydration rate were identified, primarily involving carbohydrate metabolism, energy metabolism processes (Zm00001d014030 and Zm00001d006476), and stimulus resistance (Zm00001d040113). These findings provide valuable insights to assist and guide future breeding efforts for mechanical harvesting of maize.

Tailoring of Self-Healable Polydimethylsiloxane Films for Mechanical Energy Harvesting.

Triboelectric nanogenerators (TENGs) have emerged as potential energy sources, as they are capable of harvesting energy from low-frequency mechanical actions such as biological movements, moving parts of machines, mild wind, rain droplets, and others. However, periodic mechanical motion can have a detrimental effect on the triboelectric materials that constitute a TENG device. This study introduces a self-healable triboelectric layer consisting of an Ecoflex-coated self-healable polydimethylsiloxane (SH-PDMS) polymer that can autonomously repair mechanical injury at room temperature and regain its functionality. Different compositions of bis(3-aminopropyl)-terminated PDMS and 1,3,5-triformylbenzene were used to synthesize SH-PDMS films to determine the optimum healing time. The SH-PDMS films contain reversible imine bonds that break when the material is damaged and are subsequently restored by an autonomous healing process. However, the inherent stickiness of the SH-PDMS surface itself renders the material unsuitable for application in TENGs despite its attractive self-healing capability. We show that spin-coating a thin layer (≈32 μm) of Ecoflex on top of the SH-PDMS eliminates the stickiness issue while retaining the functionality of a triboelectric material. TENGs based on Ecoflex/SH-PDMS and nylon 6 films show excellent output and fatigue performance. Even after incisions were introduced at several locations in the Ecoflex/SH-PDMS film, the TENG spontaneously attained its original output performance after a period of 24 h of healing. This study presents a viable approach to enhancing the longevity of TENGs to harvest energy from continuous mechanical actions, paving the way for durable, self-healable mechanical energy harvesters.

ИСПОЛЬЗОВАНИЕ НАСЕЛЕНИЕМ ЯКУТИИ КРИОГЕННЫХ РЕСУРСОВ ДЛЯ ПОЛУЧЕНИЯ ПИТЬЕВОЙ ВОДЫ: ЗНАЧЕНИЕ, ОСОБЕННОСТИ ЗАГОТОВКИ И ХРАНЕНИЯ НА СОВРЕМЕННОМ ЭТАПЕ

The article examines the modern practices of the use of snow and ice by the population of Yakutia to obtain drinking water. Basing on field materials, archival documents and data from ethnoblogosphere, the author reconstructs the evolution of this way of using cryogenic resources, identifies its current scale and traces the mechanisms of harvesting and organizing the storage of ice used nowadays. The article emphasizes the significant role of ice in providing the population of Yakutia with drinking water at present, noting the importance of technological development for the relevance of ice harvesting and storage practices and their optimization.

Structural and spectroscopic characterization of the peridinin-chlorophyll a-protein (PCP) complex from Heterocapsa pygmaea (HPPCP)

Light harvesting proteins are optimized to efficiently collect and transfer light energy for photosynthesis. In eukaryotic dinoflagellates these complexes utilize chlorophylls and a special carotenoid, peridinin, and arrange them for efficient excitation energy transfer. At the same time, the carotenoids protect the system by quenching harmful chlorophyll triplet states. Here we use advanced spectroscopic techniques and X-ray structure analysis to investigate excitation energy transfer processes in the major soluble antenna, the peridinin chlorophyll a protein (PCP) from the free living dinoflagellate Heterocapsa pygmaea. We determined the 3D-structure of this complex at high resolution (1.2 Å). For better comparison, we improved the reference structure of this protein from Amphidinium carterae to a resolution of 1.15 Å. We then used fs and ns time-resolved absorption spectroscopy to study the mechanisms of light harvesting, but also of the photoprotective quenching of the chlorophyll triplet state. The photoprotection site was further characterized by Electron Spin Echo Envelope Modulation (ESEEM) spectroscopy to yield information on water molecules involved in triplet-triplet energy transfer.Similar to other PCP complexes, excitation energy transfer from peridinin to chlorophyll is found to be very efficient, with transfer times in the range of 1.6–2.1 ps. One of the four carotenoids, the peridinin 614, is well positioned to quench the chlorophyll triplet state with high efficiency and transfer times in the range of tens of picoseconds. Our structural and dynamic data further support, that the intrinsic water molecule coordinating the chlorophyll Mg ion plays an essential role in photoprotection.

YOLOv5-POS: research on cabbage pose prediction method based on multi-task perception technology.

Accurate and rapid identification of cabbage posture is crucial for minimizing damage to cabbage heads during mechanical harvesting. However, due to the structural complexity of cabbages, current methods encounter challenges in detecting and segmenting the heads and roots. Therefore, exploring efficient cabbage posture prediction methods is of great significance. This study introduces YOLOv5-POS, an innovative cabbage posture prediction approach. Building on the YOLOv5s backbone, this method enhances detection and segmentation capabilities for cabbage heads and roots by incorporating C-RepGFPN to replace the traditional Neck layer, optimizing feature extraction and upsampling strategies, and refining the C-Seg segmentation head. Additionally, a cabbage root growth prediction model based on Bézier curves is proposed, using the geometric moment method for key point identification and the anti-gravity stem-seeking principle to determine root-head junctions. It performs precision root growth curve fitting and prediction, effectively overcoming the challenge posed by the outer leaves completely enclosing the cabbage root stem. YOLOv5-POS was tested on a multi-variety cabbage dataset, achieving an F1 score of 98.8% for head and root detection, with an instance segmentation accuracy of 93.5%. The posture recognition model demonstrated an average absolute error of 1.38° and an average relative error of 2.32%, while the root growth prediction model reached an accuracy of 98%. Cabbage posture recognition was completed within 28 milliseconds, enabling real-time harvesting. The enhanced model effectively addresses the challenges of cabbage segmentation and posture prediction, providing a highly accurate and efficient solution for automated harvesting, minimizing crop damage, and improving operational efficiency.

Impact of Ca2+ and Zr4+ substitution on mechanical energy harvesting response of lead-free BaTiO3 piezoceramics with thermally stable storage density and efficiency

The Ba1-xCaxZryTi1-yO3 (BCZT; x = 0.18, y = 0.08; x = 0.15, y = 0.10; x = 0.12, y = 0.12; x = 0.09, y = 0.14; both x and y are in mol. %) piezoceramics were prepared by solid-state reaction method and investigated their energy storage and harvesting responses. The composition x = 0.15, y = 0.10 ( i.e. BCZT-2) reveals the morphotropic phase boundary (MPB) near room temperature with enhanced piezoelectric properties such as piezoelectric charge coefficient (d33) ∼ 380 pC/N, piezoelectric strain coefficient (d33*) ∼ 583.71 pm/V, piezoelectric voltage coefficient (g33) ∼ 14.09 ×10−3Vm/N, figure of merits (d33×g33) ∼ 5.35 ×10−12m2/N and the electromechanical coupling coefficient (kp) ∼ 0.291. The harvested peak-to-peak open circuit AC voltage is 30 V and the calculated current is in the range of 0.02–0.14 mA with varied load resistance and the maximum obtained power density is 13.38 μW/mm3 for BCZT-2 ceramics. The DC output signal of BCZT-2 ceramics successfully lit up the 'FCLNT' panel consisting of 53 red LEDs. At room temperature, BCZT ceramics have a recoverable energy storage density (Wrec) and storage efficiency (η) in the range between 506.46 and 257.49 mJ/cm3 and 50.53 – 64.93 % respectively. The composition x = 0.12, y = 0.12 (i.e. BCZT-3) revealed the highest energy storage efficiency (η) ∼ 64.93 % at room temperature. Nonetheless, the temperature-dependent (till its Curie temperature) maximum obtained Wrec of all BCZT ceramics is found in the range between 238.41 and 446.49 mJ/cm3 with an η of 66.98–79.67 %. Thus, compositionally tuned BCZT ceramics exhibit considerable piezoelectric properties, including energy storage and harvesting capabilities.

A 3D printed serrated contact structure triboelectric nanogenerator for swimming training safety monitoring

The wearable electronic devices integrated with 3D printing have attracted much attention, but the continuous power supply demand and limited application scenarios have limited their development. Here, we propose a 3D printed serrated contact structure triboelectric nanogenerator (S-TENG) designed for mechanical energy harvesting and swimming training safety monitoring. Leveraging the advancements in 3D printing technology, we created a flexible, lightweight sensor integrated with polytetrafluoroethylene (PTFE) and polyethylene terephthalate (PET) films on a serrated substrate. This configuration enhances the contact surface area, leading to a significant improvement in energy harvesting efficiency compared to flat structures. Specifically, the serrated structure resulted in a 64 %, 63 %, and 47 % increase in open-circuit voltage (Voc), short-circuit current (Isc), and transferred charge (Qsc), respectively, owing to the contact area and unique surface functional structure. The S-TENG device exhibits excellent performance under various bending angles, with Voc, Isc, and Qsc reaching up to 98.04 V, 4.35 μA, and 38.51 nC at 90° bending. Additionally, the S-TENG maintains stable output in different humidity environments due to its fully encapsulated design, ensuring reliable operation in aquatic settings. The S-TENG can accurately measure elbow swing amplitude and frequency, providing valuable real-time data for athletes and coaches. The S-TENG's ability to detect irregular movements and potential drowning incidents underscores its promise in enhancing swimmer safety. This research demonstrates the S-TENG's utility in both energy harvesting and motion monitoring, paving the way for advanced wearable sports sensors in various athletic disciplines.

Hybrid piezo-triboelectric wind energy harvesting mechanism with flag-dragging the cantilever beam vibration

Hybrid power generators will improve the extraction of electrical energy from the wind to develop sustainable and eco-friendly self-powered wireless sensors. A novel piezo-triboelectric flag wind energy harvesting nanogenerator (P-FTENG) is proposed that consists of a piezoelectric cantilever beam and a triboelectric flag. The flag flutters in the wind, inducing vibration in the cantilever beam, thereby converting wind energy into electrical power with piezo and triboelectric effects. Based on the aerodynamic mechanism, a nonlinear flutter theoretical model is derived to evaluate the drag force and pressure of fluid separation on the piezo-triboelectric structure. Furthermore, this paper comprehensively elaborates on the transverse motion of the flag flutter caused by the airflow. The force from the transverse motion excites the cantilever beam. The power output of P-FTENG generation depends on various factors. The optimized flag-shaped configuration may activate the piezoelectric cantilever beam vibration and decrease the crucial flutter wind speed, according to test results. P-FTENG generates a voltage of around 17.8 V when the wind speed is 8.5 m/s. The cantilever beam energy harvester's PEH reaches 32 mW/m2, while Flag-TENG's output power density reaches 37 μW/m2, which charges capacitors and lights the array of LEDs. The hybrid piezo-triboelectric flag nanogenerator fluttering in the wind is promising for powering the function of a calculator or electronic thermometer/hygrometer sensor.

Flexible Organic Molecular Single Crystal-Based Triboelectric Device as a Self-Powered Tactile Sensor.

Triboelectric nanogenerators (TENGs) have proven to be effective at converting mechanical energy into electrical power, making them a viable technology for operating self-powered electronic devices used in medical diagnostics and environmental monitoring. In the present study, we demonstrate the utility of the flexible single crystals of an organic compound for the fabrication of a TENG as a self-powered tactile sensor. Triboelectrification was attained in single crystals as a result of surface functionalization with positively and negatively charged moieties, viz. Zn2+ and F-, respectively, which resulted in a variable surface potential and reversible adhesion through electrostatic interaction and induction phenomena. TENG incorporating the single crystals showed an output voltage of 2.4 V, a current density of ∼2.2 μA/m2, and a power density of ∼850 mW/m2 and was capable of charging commercial capacitors thereby ensuring its ability to be used as a self-powered touch sensor. Capitalizing on these features, a self-powered tactile sensor was fabricated to demonstrate limb movements. The excellent mechano-electric sensitivity (∼102 mV/kPa until 6 kPa range) and response time (∼38 ms) establish the viability of flexible organic single crystals for mechanical energy harvesting and biosensing applications that could pave the way for their utilization as biomedical wearable devices.

Fine-mapping of a major QTL controlling plant height by BSA-seq and transcriptome sequencing in cotton.

GhSOT (GH_D05G3950) plays a negative role in regulating plant height development by modulating the GA signaling. Plant height is an important indicator affecting mechanical harvesting for cotton. Therefore, understanding the genes associated with the plant height is crucial for cotton breeding and production. In this study, we used bulk segregant analysis sequencing to identify a new quantitative trait locu (QTL) called qPH5.1, which is linked to plant height. Local QTL mapping using seven kompetitive allele-specific PCR(KASP) markers and linkage analysis successfully narrowed down qPH5.1 to ~ 0.34 Mb region harbored five candidate genes. Subsequently, RNA sequencing (RNA-seq) analysis and examination of expression patterns revealed that GhSOT exhibited the highest likelihood of being the candidate gene responsible for the plant height at this locus. Seven SNP site variations were identified in the GhSOT promoter between the two parents, and Luciferase experiments confirmed that the promoter of GhSOT from cz3 enhances downstream gene expression more effectively. Additionally, suppression of GhSOT in cz3 resulted in the restoration of plant height, further emphasizing the functional significance of this gene. Application of exogenous gibberellin acid (GA) significantly restored plant height in cz3, as demonstrated by RNA-seq analysis and exogenous hormone treatment, which revealed alterations in genes associated with GA signaling pathways. These results reveal GhSOT is a key gene controlling plant height, which may affect plant height by regulating GA signaling.

Modulating Contact Electrification With Metal‐Organic Frameworks in Flexible Triboelectric Nanogenerators for Kinetic Energy Harvesting and Self‐Powered Humidity Sensing Applications

AbstractHerein, we present a novel method for fabricating a triboelectric nanogenerator using Polyacrylonitrile (PAN) on both sides as triboelectric pairs, incorporating metal‐organic frameworks (MOFs) such as ZIF‐8, ZIF‐67, MIL‐100, and HKUST‐1 during the electrospinning process. The triboelectric properties of the MOF‐incorporated fibers are thus tailored and positioned within the triboelectric series for the first time. The resulting triboelectric polarity of the composite fiber is linked to the optical bandgap energy of the PAN and the MOF/PAN composite, facilitating electron transfer between materials of different work functions and leading to enhanced output in the developed triboelectric devices. Fascinatingly, the appropriate choice of MOF filler also displayed the potential for reversing the triboelectric polarity of PAN nanofiber. Consequently, incorporating ZIF‐8 and MIL‐100 into PAN nanofibers led notably to contrasting trends in triboelectric polarity, with the pair generating an open‐circuit output voltage of 100 V, short‐circuit current of 1.35 μA, and a power density of 18.4 mW/m2 respectively. The fabricated device demonstrated effectiveness for mechanical energy harvesting applications and also as a self‐powered humidity sensor, displaying rapid response to changes in ambient humidity levels with a maximum sensitivity of 2.14 V/%RH, for relative humidity range between 50 and 90% during the humidifying cycle.

Multifunctional Thermochromic Dye‐Integrated Hybrid Nanogenerators for Mechanical Energy Harvesting and Real‐Time IoT Sensing

AbstractHybrid nanogenerators are advanced mechanical energy harvesters capable of simultaneously scavenging multiple types of energy. Additionally, thermochromic materials provide a practical and visually assessable method for real‐time temperature monitoring. In this report, a novel energy harvester and sensing patch (EHSP) is introduced, that utilizes combined piezoelectric and triboelectric effects to harvest mechanical energy efficiently. To optimize the EHSP, various energy harvester configurations are fabricated and tested, and the dielectric properties of triboelectric films are systematically investigated. These improvements are implemented to augment the overall energy harvesting capability. The thermochromic properties of the EHSP are also explored to enhance both the electrical performance and thermal responsiveness. The EHSP demonstrates the ability to generate maximum voltage and current outputs of 350 V and 20.4 µA, respectively. Moreover, it can detect temperature changes within seconds, making it suitable for both energy harvesting and sensing applications. The EHSP is tested in practical scenarios, proving its efficiency as an energy harvester and sensor for everyday human activities. Furthermore, its integration with multiple hybrid nanogenerators showcases its potential for industrial and wearable sensing applications.

Thermally Activated Delayed Fluorescence and Beyond. Photophysics and Material Design Strategies.

This review focuses on thermally activated delayed fluorescence (TADF). Photophysical properties of Cu(I) complexes and unique organic molecules are addressed. Investigations, based on temperature‐dependent emission studies, micro‐ to femto‐second time‐resolved spectroscopy investigations, quantum mechanical considerations, state‐of‐art calculations, and organic light‐emitting diodes (OLED) device studies, address exciton harvesting mechanisms and photophysical impact of the energy gap ΔE(S1–T1) and spin‐orbit coupling (SOC). We disclose relationship between (i) ΔE(S1–T1) and transition rate k(S1–S0); (ii) SOC, phosphorescence, and intersystem crossing (ISC); (iii) internal/external rigidity, luminescence quantum yield, excitation self‐trapping, and concentration quenching; (iv) environment polarity and state energy tuning, as well as (v) SOC and combined ambient‐temperature TADF/phosphorescence, zero‐field splitting, and spin‐lattice relaxation (at T = 1.2 K). These studies guide us to milestone Cu(I) complexes. Moreover, we demonstrate that fast ISC in organic molecules requires state mixing with an additional, energetically close triplet state. Thus, a guide structure for unique organic TADF molecules with ultra‐fast ISC and reverse‐ISC rates (>109 s−1) combined with ΔE(S1–T1)<10 cm−1 (<1 meV) is presented allowing for ultra‐fast singlet‐triplet equilibrated fluorescence with sub‐microsecond decay. First OLEDs fabricated show high external quantum efficiency of ≈19%. Based on this breakthrough material class, a new exciton harvesting mechanism, the direct singlet harvesting (DSH), is presented.