Kinetic Isotope Effect Measurements Research Articles

Glycosylium Ions in Superacid Mimic the Transition State of Enzyme Reactions.

The hydrolysis of glycosides is a biochemical transformation that occurs in all living organisms, catalyzed by a broad group of enzymes, including glycoside hydrolases. These enzymes cleave the glycosidic bond via a transition state with substantial oxocarbenium ion character, resulting in short-lived oxocarbenium ion-like species. While such transient species have been inferred through theoretical studies and kinetic isotope effect measurements, their direct spectroscopic characterization remains challenging. In this study, we exploit a superacid environment to generate, accumulate, and fully characterize nonprotected 2-deoxy glycosyl cations in the d-glucopyranose, d-galactopyranose, and l-arabinofuranose series using low-temperature NMR spectroscopy, supported by DFT calculations. Additionally, QM/MM MD simulations reveal that the properties of these glycosyl cations in superacid closely resemble those within the active sites of glycosidase enzymes, particularly in terms of conformation and anomeric charge distribution. These findings highlight a parallel between the stabilizing effect of counterions in superacid media and the network of multidentate noncovalent interactions within glycosidase active sites, which stabilize transition states with pronounced oxocarbenium ion character.

Revealing OH species in situ generated on low-valence Cu sites for selective carbonyl oxidation

Catalytic oxidation through the transfer of lattice oxygen from metal oxides to reactants, namely the Mars-van Krevelen mechanism, has been widely reported. In this study, we evidence the overlooked oxidation route that features the in situ formation of surface OH species on Cu catalysts and its selective addition to the reactant carbonyl group. We observed that glucose oxidation to gluconic acid in air (21% O2) was favored on low-valence Cu sites according to X-ray spectroscopic analyses. Molecular O2 was activated in situ on Cu0/Cu+ forming localized, adsorbed hydroxyl radicals (*OH) which played the primary reactive oxygen species as confirmed by the kinetic isotope effect (KIE) study in D2O and in situ Raman experiments. Combined with DFT calculations, we proposed a mechanism of O2-to-*OH activation through the *OOH intermediate. The localized *OH exhibited higher selectivity toward glucose oxidation at C1HO to form gluconic acid (up to 91% selectivity), in comparison with free radicals in bulk environment that emerged from thermal, noncatalytic hydrogen peroxide decomposition (40% selectivity). The KIE measurements revealed a lower glucose oxidation rate in D2O than in H2O, highlighting the role of water (H2O/D2O) or its derivatives (e.g., *OH/*OD) in the rate-determining step. After proving the C1-H activation step kinetically irrelevant, we proposed the oxidation mechanism that was characterized by the rate-limiting addition of *OH to C1=O in glucose. Our findings advocate that by maneuvering the coverage and activity of surface *OH, high-performance oxidation of carbonyl compounds beyond biomass molecules can be achieved in water and air using nonprecious metal catalysts.

Molecular switching by proton-coupled electron transport drives giant negative differential resistance

To develop new types of dynamic molecular devices with atomic-scale control over electronic function, new types of molecular switches are needed with time-dependent switching probabilities. We report such a molecular switch based on proton-coupled electron transfer (PCET) reaction with giant hysteric negative differential resistance (NDR) with peak-to-valley ratios of 120 ± 6.6 and memory on/off ratios of (2.4 ± 0.6) × 103. The switching dynamics probabilities are modulated by bias voltage sweep rate and can also be controlled by pH and relative humidity, confirmed by kinetic isotope effect measurements. The demonstrated dynamical and environment-specific modulation of giant NDR and memory effects provide new opportunities for bioelectronics and artificial neural networks.

Enhancing proton-coupled electron transfer drives efficient methanogenesis in anaerobic digestion

The enhancement of electron or proton transfer between syntrophic microbes has been widely recognised as a means for improving methane generation. However, the uncoupled supplementation of electrons and protons in multiphase anaerobic environment hinders the balanced uptake of electrons and protons in the cytoplasm of methanogens, limiting methanogenesis efficiency. Herein, the cooperative effect of a proton-conductive material (PM) and an electron-conductive material (EM) in enhancing proton-coupled electron transfer (PCET) and driving efficient methanogenesis in anaerobic digestion was investigated. The cooperation of the PM and EM significantly increased methane production and the maximum methane generation rate by 78.9 % and 103.5 %, respectively, indicating enhanced methanogenesis efficiency. Analysis of the physicochemical properties, biochemical components, and microbial dynamics revealed that the cooperation of the PM and EM improved the metabolism of syntrophic microbes, which was critically dependent on electron and proton transfer. This enhancement was primarily due to the improvement in PCET, as mainly supported by hydrogen/deuterium kinetic isotope effect measurements, multi-omics integration analyses and reaction thermodynamics and kinetics analyses. Our findings suggest that the PCET enhancement stimulated efficient membrane-bound enzymatic reactions related to electron-driven proton translocation and facilitated electron and proton supply for CO2 reduction to realise highly efficient methane generation. These findings are expected to provide a new insight into effective electron and proton coupling transfer for methanogenic metabolism in multiphase anaerobic environments.

Trajectory-Based Time-Resolved Mechanism for Benzene Reductive Elimination from Cyclopentadienyl Mo/W Phenyl Hydride Complexes.

Calculated potential energy structures and landscapes are very often used to define the sequence of reaction steps in an organometallic reaction mechanism and interpret kinetic isotope effect (KIE) measurements. Underlying most of this structure-to-mechanism translation is the use of statistical rate theories without consideration of atomic/molecular motion. Here we report direct dynamics simulations for an organometallic benzene reductive elimination reaction, where nonstatistical intermediates and dynamic-controlled pathways were identified. Specifically, we report single spin state as well as mixed spin state quasiclassical direct dynamics trajectories in the gas phase and explicit solvent for benzene reductive elimination from Mo and W bridged cyclopentadienyl phenyl hydride complexes ([Me2Si(C5Me4)2]M(H)(Ph), M = Mo and W). Different from the energy landscape mechanistic sequence, the dynamics trajectories revealed that after the benzene C-H bond forming transition state (often called reductive coupling), σ-coordination and π-coordination intermediates are either skipped or circumvented and that there is a direct pathway to forming a spin flipped solvent caged intermediate, which occurs in just a few hundred femtoseconds. Classical molecular dynamics simulations were then used to estimate the lifetime of the caged intermediate, which is between 200 and 400 picoseconds. This indicates that when the η2-π-coordination intermediate is formed, it occurs only after the first formation of the solvent-caged intermediate. This dynamic mechanism intriguingly suggests the possibility that the solvent-caged intermediate rather than a coordination intermediate is responsible (or partially responsible) for the inverse KIE value experimentally measured for W. Additionally, this dynamic mechanism prompted us to calculate the kH/kD KIE value for the C-H bonding forming transition states of Mo and W. Surprisingly, Mo gave a normal value, while W gave an inverse value, albeit small, due to a much later transition state position.

Metal-Free Heterogeneous Asymmetric Hydrogenation of Olefins Promoted by Chiral Frustrated Lewis Pair Framework.

The development of metal-free and recyclable catalysts for significant yet challenging transformations of naturally abundant feedstocks has long been sought after. In this work, we contribute a general strategy of combining the rationally designed crystalline covalent organic framework (COF) with a newly developed chiral frustrated Lewis pair (CFLP) to afford chiral frustrated Lewis pair framework (CFLPF), which can efficiently promote the asymmetric olefin hydrogenation in a heterogeneous manner, outperforming the homogeneous CFLP counterpart. Notably, the metal-free CFLPF exhibits superior activity/enantioselectivity in addition to excellent stability/recyclability. A series of in situ spectroscopic studies, kinetic isotope effect measurements, and density-functional theory computational calculations were also performed to gain an insightful understanding of the superior asymmetric hydrogenation catalysis performances of CFLPF. Our work not only increases the versatility of catalysts for asymmetric catalysis but also broadens the reactivity of porous organic materials with the addition of frustrated Lewis pair (FLP) chemistry, thereby suggesting a new approach for practical and substantial transformations through the advancement of novel catalysts from both concept and design perspectives.

DFT mechanistic study of biomimetic diiron complex catalyzed dehydrogenation: Unexpected Fe(III)Fe(III)-1,1-μ-hydroperoxy active species for hydride abstraction

The diiron active site is pivotal in catalyzing transformations in both biological and chemical systems. Recently, a range of biomimetic diiron catalysts have been synthesized, drawing inspiration from the active architecture of soluble methane monooxygenase (sMMO). These catalysts have been successfully deployed for the dehydrogenation of indolines, marking a significant advancement in the field. Using density functional theory (DFT) calculations, we have identified a novel mechanistic pathway that governs the dehydrogenation of indolines catalyzed by a biomimetic diiron complex. Specifically, this reaction is facilitated by the transfer of a hybrid atom from the C1 position of the substrate to the distal oxygen atom of the Fe(III)Fe(III)-1,1-μ-hydroperoxy active species. This transfer serves as the rate-limiting step for the heterolytic cleavage of the OO bond, ultimately generating the substrate cation. The mechanism we propose aligns well with mechanistic investigations incorporating both kinetic isotope effect (KIE) measurements and evaluations of stereochemical selectivity. This research contributes to the broader scientific understanding of catalysis involving biomimetic diiron complexes and offers valuable insights into the catalytic behaviors of non-heme diiron metalloenzymes.

Bacteria-derived atomically dispersed iron–nitrogen–phosphorus active sites for boosting electrochemical CO2 reduction kinetics

The construction of efficient electrocatalysts is key in harnessing the electrochemical CO2 reduction reaction (CRR) to produce high-value chemicals. Herein, a typical bacterium containing metal–nitrogen (M−N) groups and with a rich phosphorus content, Shewanella oneidensis MR-1, was used as a single precursor to produce atomically dispersed iron–nitrogen–phosphorus active sites (P–Fe/NC-1000) for converting CO2 to CO. Excellent CO selectivity of nearly 100% at 390 mV overpotential was achieved with good stability, and a rechargeable Zn–CO2 battery provides a maximum power density of 1.32 mW cm−2. Kinetic isotope effect measurements revealed that the presence of P atoms accelerates water dissociation and transfers a proton to Fe centers to promote protonation of intermediates and the overall CRR process. This synthesis strategy based on the intrinsic structure of a precursor may inspire the development of other high-performance catalysts for diverse electrochemical reactions beyond the CRR .

A Bacterial Form I' Rubisco Has a Smaller Carbon Isotope Fractionation than Its Form I Counterpart.

Form I rubiscos evolved in Cyanobacteria ≥ 2.5 billion years ago and are enzymatically unique due to the presence of small subunits (RbcS) capping both ends of an octameric large subunit (RbcL) rubisco assembly to form a hexadecameric (L8S8) holoenzyme. Although RbcS was previously thought to be integral to Form I rubisco stability, the recent discovery of a closely related sister clade of octameric rubiscos (Form I'; L8) demonstrates that the L8 complex can assemble without small subunits (Banda et al. 2020). Rubisco also displays a kinetic isotope effect (KIE) where the 3PG product is depleted in 13C relative to 12C. In Cyanobacteria, only two Form I KIE measurements exist, making interpretation of bacterial carbon isotope data difficult. To aid comparison, we measured in vitro the KIEs of Form I' (Candidatus Promineofilum breve) and Form I (Synechococcus elongatus PCC 6301) rubiscos and found the KIE to be smaller in the L8 rubisco (16.25 ± 1.36‱ vs. 22.42 ± 2.37‱, respectively). Therefore, while small subunits may not be necessary for protein stability, they may affect the KIE. Our findings may provide insight into the function of RbcS and allow more refined interpretation of environmental carbon isotope data.

NaCl catalyzed transesterification and hydrolysis of ethylene carbonate

Sodium chloride (NaCl) was used as catalyst for the production of bulk chemicals of dimethyl carbonate and ethylene glycol by transesterification of ethylene carbonate with methanol first time in high activity with a TON of 770. Mechanism studies by kinetic isotope effect measurements and DFT calculations indicated that NaCl acted as Lewis base to catalyze transesterification via the SN2 mechanism. Moreover, NaCl was demonstrated to be an effective catalyst for the hydrolysis of ethylene carbonate.

Measurement of kinetic isotope effects on peptide hydroxylation using MALDI-MS.

Primary kinetic isotope effects (KIEs) provide unique insight into enzymatic reactions, as they can reveal rate-limiting steps and detailed chemical mechanisms. HIF hydroxylases, part of a family of 2-oxoglutarate (2OG) oxygenases are central to the regulation of many crucial biological processes through O2-sensing, but present a challenge to monitor due to the large size of the protein substrate and the similarity between native and hydroxylated substrate. MALDI-TOF MS is a convenient tool to measure peptide masses, which can also be used to measure the discontinuous kinetics of peptide hydroxylation for Factor Inhibiting HIF (FIH). Using this technique, rate data can be observed from the mole-fraction of CTAD and CTAD-OH in small volumes, allowing noncompetitive H/D KIEs to be measured. Slow dCTAD substrate leads to extensive uncoupling of O2 consumption from peptide hydroxylation, leading to enzyme autohydroxylation, which is observed using UV-vis spectroscopy. Simultaneously measuring both the normal product, CTAD-OH, and the uncoupled product, autohydroxylated enzyme, the KIE on the microscopic step of hydrogen atom transfer (HAT) can be estimated. MALDI-MS analysis is a strong method for monitoring reactions that hydroxylate peptides, and can be generalized to other similar reactions, and simultaneous kinetic detection of branched products can provide valuable insight on microscopic KIEs at intermediate mechanistic steps.

Nitrene transfer from a sterically confined copper nitrenoid dipyrrin complex.

Despite the myriad Cu-catalyzed nitrene transfer methodologies to form new C-N bonds (e.g., amination, aziridination), the critical reaction intermediates have largely eluded direct characterization due to their inherent reactivity. Herein, we report the synthesis of dipyrrin-supported Cu nitrenoid adducts, investigate their spectroscopic features, and probe their nitrene transfer chemistry through detailed mechanistic analyses. Treatment of the dipyrrin CuI complexes with substituted organoazides affords terminally ligated organoazide adducts with minimal activation of the azide unit as evidenced by vibrational spectroscopy and single crystal X-ray diffraction. The Cu nitrenoid, with an electronic structure most consistent with a triplet nitrene adduct of CuI, is accessed following geometric rearrangement of the azide adduct from κ1-N terminal ligation to κ1-N internal ligation with subsequent expulsion of N2. For perfluorinated arylazides, stoichiometric and catalytic C-H amination and aziridination was observed. Mechanistic analysis employing substrate competition reveals an enthalpically-controlled, electrophilic nitrene transfer for primary and secondary C-H bonds. Kinetic analyses for catalytic amination using tetrahydrofuran as a model substrate reveal pseudo-first order kinetics under relevant amination conditions with a first-order dependence on both Cu and organoazide. Activation parameters determined from Eyring analysis (ΔH‡ = 9.2(2) kcal mol-1, ΔS‡ = -42(2) cal mol-1 K-1, ΔG‡298K = 21.7(2) kcal mol-1) and parallel kinetic isotope effect measurements (1.10(2)) are consistent with rate-limiting Cu nitrenoid formation, followed by a proposed stepwise hydrogen-atom abstraction and rapid radical recombination to furnish the resulting C-N bond. The proposed mechanism and experimental analysis are further corroborated by density functional theory calculations. Multiconfigurational calculations provide insight into the electronic structure of the catalytically relevant Cu nitrene intermediates. The findings presented herein will assist in the development of future methodology for Cu-mediated C-N bond forming catalysis.

A Common Active Intermediate in the Oxidation of Alkenes, Alcohols and Alkanes with H2O2 and a Mn(II)/Pyridin-2-Carboxylato Catalyst.

The mechanism and the reactive species involved in the oxidation of alkenes, and alcohols with H2O2, catalysed by an in situ prepared mixture of a MnII salt, pyridine-2-carboxylic acid and a ketone is elucidated using substrate competition experiments, kinetic isotope effect (KIE) measurements, and atom tracking with 18O labelling. The data indicate that a single reactive species engages in the oxidation of both alkenes and alcohols. The primary KIE in the oxidation of benzyl alcohols is ca. 3.5 and shows the reactive species to be selective despite a zero order dependence on substrate concentration, and the high turnover frequencies (up to 30 s-1) observed. Selective 18O labelling identifies the origin of the oxygen atoms transferred to the substrate during oxidation, and is consistent with a highly reactive, e. g., [MnV(O)(OH)] or [MnV(O)2], species rather than an alkylperoxy or hydroperoxy species.

Amine-Functionalized Carbon Bowl-Supported Pd-La(OH)3 for Formic Acid Dehydrogenation.

Formic acid (HCOOH, FA) is emerging as an appealing carrier for hydrogen storage owing to its renewability, a high volumetric capacity of 53 g H2/L, and convenient storage/transportation as a liquid. It is highly desired but still a challenge to search highly efficient catalysts to realize hydrogen evolution from FA. Here, monodispersed and ultrasmall Pd-La(OH)3 nanoparticles (NPs) anchored on amine-functionalized N-doped porous carbon bowl (N-PCB-NH2) substrates have been fabricated through a facile wet chemistry approach. As a result of the ultrafine size of Pd-La(OH)3 NPs (1.6 nm), the deprotonation ability of La(OH)3 and amine groups, and the strong metal-support interaction between Pd-La(OH)3 and N-PCB-NH2, the as-prepared Pd-La(OH)3/N-PCB-NH2 catalyst exhibits 100% H2 selectivity and exceptional catalytic property with a high turnover frequency value up to 9585 h-1 for FA dehydrogenation at 323 K, which is superior to most of the heterogeneous catalysts ever reported. Kinetic isotope effect measurements demonstrate that the C-H bond cleavage is a rate-determining step in the FA dehydrogenation reaction as compared to the O-H bond dissociation. This work presents a feasible approach to synthesize supported ultrafine metal NP catalysts with porous bowl structures for H2 generation from FA.

Pd–WOx heterostructures immobilized by MOFs-derived carbon cage for formic acid dehydrogenation

Formic acid (FA), a major product formed in biomass processing and CO2 reduction, has attracted considerable attention as a promising renewable liquid-phase hydrogen carrier. Designing highly efficient catalysts for FA dehydrogenation is a key challenge for fuel cell-based hydrogen economy. Herein, Pd-WOx nano-heterostructures (2.9 nm in diameter) anchored on ZIF-8 @ZIF-67 core-hell MOFs-derived nitrogen-doped porous carbon cage (NPCC) are fabricated for the first time through a phosphate mediation approach. Strong adsorption and dispersion of Pd2+ in the phosphate-modified NPCC are essential for the synthesis of highly dispersed ultrafine Pd nanoparticles. The alkaline solution produced during the subsequent reduction process of metal ions can remove the phosphate. The obtained Pd-WOx/(P)NPCC catalyst presents an extraordinarily catalytic performance (TOF, 2877 h–1 at 303 K and 6135 h–1 at 323 K) with a 100% H2 selectivity and conversion toward FA dehydrogenation. The superior performance of Pd–WOx/(P)NPCC is likely due to the strong interaction effect between Pd-WOx and NPCC; unique structures of Pd-WOx nano-heterostructures; and NPCC with hollow and large surface area and abundant surface defects. Kinetic isotope effect (KIE) measurements demonstrated that cleavage of CH bond is the rate-determining step for HCOOH dehydrogenation. This study provides new insights into a facile and controllable synthesis strategy of inexpensive and efficient catalysts for high-efficiency dehydrogenation of liquid-phase hydrogen carrier.

Water promoted photocatalytic Cβ-O bonds hydrogenolysis in lignin model compounds and lignin biomass conversion to aromatic monomers

Photocatalysis has proved its potential in cleaving the Cβ-O linkages between the natural aromatic units in lignin biomass and converting abundant lignin biomass to valuable aromatic monomer products. However, the slow reaction rate and low selectivity for aromatic monomers still hinder its future industrial implementation. To address these challenges in photocatalytic Cβ-O bond fragmentation, a Zn/S rich phase zinc indium sulfide photocatalyst was developed to promote hydrogenolysis of Cβ-O linkages in lignin. In this work, water is for the first time, used as the hydrogen donor and can significantly promote the photocatalytic process by eliminating the limitation of protons supply. The reaction selectivity for aromatic monomers increased by 170% and PP-ol conversion rate raised by 58% comparing to the reaction condition without water. Notably, complete conversion of lignin model compounds with an expectational improved reaction rate and over 90% selectivity for aromatic monomers have been achieved in this study. The isotopic labeling experiments and kinetic isotope effects (KIE) measurements also indicate that the dissociation of the O–H bond in water which provides protons to the Cβ-O bond hydrogenolysis process is a critical step to this reaction. Mechanistic studies reveal that the dehydrogenated radical intermediates are initially generated by the oxidation of photogenerated holes, and the protons generated from photocatalytic water splitting are superior in facilitating the subsequently hydrogenolysis process of Cβ-O bonds. This study provides a new and effective strategy to promote the cleavage of Cβ-O linkages and is helpful for the future development of photocatalytic lignin valorization.

Using kinetic isotope effects to probe the mechanism of adenosylcobalamin-dependent enzymes.

Adenosylcobalamin- (AdoCbl) dependent enzyme reactions involved the transfer of hydrogen atoms between the 5'-carbon of the coenzyme and the substrates and products of the reaction. Tritium and deuterium kinetic isotope effect measurements are, therefore, a valuable tool to probe the mechanisms of AdoCbl-dependent enzymes, as they can provide information about the reaction pathway and the rate-determining step. Furthermore, if the intrinsic kinetic isotope effect can be isolated, information on the nature of the transition state associated with hydrogen transfer can be obtained. In this chapter I present methods for the preparation of isotopically-labeled AdoCbl and their use in rapid chemical quench experiments that allow isotope effects on specific steps in the reaction to be isolated. These techniques are illustrated with examples from my laboratory's studies on the AdoCbl dependent enzyme, glutamate mutase.

Sterically Stabilized End-On Superoxocopper(II) Complexes and Mechanistic Insights into Their Reactivity with O-H, N-H, and C-H Substrates.

Instability of end-on superoxocopper(II) complexes, with respect to conversion to peroxo-bridged dicopper(II) complexes, has largely constrained their study to very low temperatures. This limits their kinetic capacity to oxidize substrates. In response, we have developed a series of bulky ligands, Ar3-TMPA (Ar = tpb, dpb, dtbpb), and used them to support copper(I) complexes that react with O2 to yield [CuII(η1-O2•-)(Ar3-TMPA)]+ species, which are stable against dimerization at all temperatures. Binding of O2 saturates at subambient temperatures and can be reversed by warming. The onset of oxygenation for the Ar = tpb and dpb systems is observed at 25 °C, and all three [CuII(η1-O2•-)(Ar3-TMPA)]+ complexes are stable against self-decay at temperatures of ≤-20 °C. This provides a wide temperature window for study of these complexes, which was exploited by performing extensive reaction kinetics measurements for [CuII(η1-O2•-)(tpb3-TMPA)]+ using a broad range of O-H, N-H, and C-H bond substrates. This includes correlation of second order rate constants (k2) versus oxidation potentials (Eox) for a range of phenols, construction of Eyring plots, and temperature-dependent kinetic isotope effect (KIE) measurements. The data obtained indicate that reaction with all substrates proceeds via H atom transfer (HAT), reaction with the phenols proceeds with significant charge transfer, and full tunneling of both H and D atoms occurs in the case of 1,2-diphenylhydrazine and 4-methoxy-2,6-di-tert-butylphenol. Oxidation of C-H bonds proved to be kinetically challenging, and whereas [CuII(η1-O2•-)(tpb3-TMPA)]+ can oxidize moderately strong O-H and N-H bonds, it is only able to oxidize very weak C-H bonds.

Decatungstate‐Photocatalyzed Radical Addition of 9‐Substituted Fluorenes to [60]Fullerene: A Mechanistic Approach

AbstractAn innovative, efficient, regioselective functionalization of C60 with 9H‐fluorenes has been disclosed. This efficient photochemical approach uses certain fluorenyl radicals in 9‐position deriving from fluorenes through a hydrogen‐atom transfer (HAT) process mediated by tetrabutylammoniumdecatungstate [(n‐Bu4N)4W10O32]. The single addition of these fluorenyl radicals to C60 proceeded to produce [60]fullerene‐fluorene dyads in a single step. The scope and mechanism of this new reaction have been examined. The primary kinetic isotope effect measurements signify the presence of a stepwise mechanism in which the C−H (D) bond scission is the rate‐limiting step of the reaction.

Zinc Iodide Catalyzed Synthesis of Trisubstituted Allenes from Terminal Alkynes and Ketones.

A straightforward, user-friendly, efficient protocol for the one pot, ZnI2-catalyzed allenylation of terminal alkynes with pyrrolidine and ketones, toward trisubstituted allenes, is described. Trisubstituted allenes can be obtained under either conventional heating or microwave irradiation conditions, which significantly reduces the reaction time. A sustainable, widely available, and low-cost metal salt catalyst is employed, and the reactions are carried out under solvent-free conditions. Among others, synthetically valuable allenes bearing functionalities such as amide, hydroxyl, or phthalimide can be efficiently prepared. Mechanistic experiments, including kinetic isotope effect measurements and density functional theory (DFT) calculations, suggest a rate-determining [1,5]-hydride transfer during the transformation of the intermediate propargylamine to the final allene.