Maximum Elimination Research Articles

Effect of inoculum type, packing material and operational conditions on the biofiltration of a mixture of hydrophobic volatile organic compounds in air

The emission of volatile organic compounds (VOCs) into the atmosphere causes negative environmental and health effects. Biofiltration is known to be an efficient and cost-effective treatment technology for the removal of VOCs in waste gas streams. However, little is known on the removal of VOC mixtures and the effect of operational conditions, particularly for hydrophobic VOCs, and on the microbial populations governing the biofiltration process. In this study, we evaluated the effect of inoculum type (acclimated activated sludge (A-AS) versus Rhodococcus erythropolis) and packing material (mixture of compost and wood chips (C + WC) versus expanded perlite) on the removal of a mixture of hydrophobic VOCs (toluene, cyclohexane and hexane) in three biofilters (BFs), i.e., BF1: C + WC and R. erythropolis; BF2: C + WC and A-AS; and BF3: expanded perlite and R. erythropolis. The BFs were operated for 374 days at varying inlet loads (ILs) and empty bed residence times (EBRTs). The results showed that the VOCs were removed in the following order: toluene > cyclohexane > hexane, which corresponds to their air-water partitioning coefficient and thus bioavailability of each VOC. Toluene is the most hydrophilic VOC, while hexane is the most hydrophobic. BF2 outperformed BF1 and BF3 in each operational phase, with average maximum elimination capacities (ECmax) of 21 ± 3 g toluene m−3 h−1 (removal efficiency (RE): 100 %; EBRT: 82 s), 11 ± 2 g cyclohexane m−3 h−1 (RE: 86 ± 6 %; EBRT: 163 s) and 6.2 ± 0.9 g hexane m−3 h−1 (RE: 96 ± 4 %; EBRT: 245 s). Microbial analysis showed that despite having different inocula, the genera Rhodococcus, Mycobacterium and/or Pseudonocardia dominated in all BFs but at different relative abundances. This study provides new insights into the removal of difficult-to-degrade VOC mixtures with limited research to date on biofiltration.

Synthesis and characterization of nanobiochar from rice husk biochar for the removal of safranin and malachite green from water

Xenobiotic pollution in environment is a potential risk to marine life, and human health. Nanobiotechnology is an advanced and emerging solution for the removal of environmental pollutants. Adsorption-based technologies are being used to alleviate the global prevalence of xenobiotics like dyes, due to their high efficacy and cost effectiveness. Current study explored the potential of nanobiochar syntehsized via ultrasonication and centrifugation from rice husk for dye removal from water. It involves the synthesis of nanobiochar from rice husk biochar for removal of Safranin, Malachite green, and a mixture of both from aqueous water. Biochar was synthesized through pyrolysis at 600 °C for 2 h. To convert it into nanobiochar, sonication and centrifugation techniques were applied. The yield obtained was 27.5% for biochar and 0.9% for nanobiochar. Nanobiochar analysis through Fourier-Transform Spectrometer (FTIR), X-ray Power Diffraction (XRD) and scanning electron microscopy (SEM) suggested its crystalline nature having minerals rich in silicon, with a cracked and disintegrated carbon structure due to high temperature and processing treatments. Removal of dyes by nanobiochar was evaluated by changing different physical parameters i.e., nanobiochar dose, pH, and temperature. Pseudo-first order model and pseudo-second order model were applied to studying the adsorption kinetics mechanism. Kinetics for adsorption of dyes followed the pseudo-second order model suggesting the removal of dyes by process of chemical sorption. High adsorption was found at a higher concentration of nanobiochar, high temperature, and neutral pH. Maximum elimination percentages of safranin, malachite green, and a mixture of dyes were obtained as 91.7%, 87.5%, and 85% respectively. We conclude that nanobiochar could be a solution for dye removal from aqueous media.

Comparative assessment of the performance of one- and two-liquid phase biotrickling filters for the simultaneous abatement of gaseous mixture of methanol, α-pinene, and hydrogen sulfide

A gaseous mixture of methanol (M), α-pinene (P), and hydrogen sulfide (H) was treated in one/two-liquid phase biotrickling filters (OLP/TLP-BTFs) at varying inlet concentrations and at an empty bed residence time (EBRT) of 57 s. The performance of TLP-BTF [BTF (A)] improved significantly in terms of M and P removal due to the presence of silicone oil at 5% v/v. The maximum elimination capacities (ECs) of M, P, and H in BTF (A) were obtained as 309, 73, and 56 g m−3 h−1, respectively. While, the maximum ECs achieved in the BTF operated without silicone oil [BTF (B)] were 172, 28, and 21 g m−3 h−1 for M, P, and H removal, respectively. Increasing the inlet concentration of H from 32 to 337 ppm inhibited P removal in both the BTFs. The presence of silicone oil enhanced gas-liquid mass transfer, prevented the BTF from experiencing substrate inhibition effects and allowed reaching high ECs for M and P. The experiments showed promising results for the long-term operation of removal of M, P, and H mixture in a one-stage TLP-BTF with the decreasing negative effects of M and H on P degradation.

Enhanced removal organic compounds and particles from cooking fume using activated sludge scrubber filled loofah: From performance to the mechanism

The catering industry's growth has resulted in cooking fume pollution becoming a major concern in people's lives. As a result, its removal has become a core research focus. Natural loofah is an ideal biofilm carrier, providing a conducive environment for microorganisms to grow. This study utilized natural loofah to fill domesticated activated sludge in a bioscrubber, forming biofilms that enhance the ability to purify cooking fume. This study found that the biomass of loofah biofilms per gram is 104.56 mg. The research also determined the removal efficiencies for oils, Non-methane total hydrocarbons (NMHC), PM2.5, and PM10 from cooking fumes, which were 91.53%, 67.53%, 75.25%, and 82.23%, respectively. The maximum elimination capacity for cooking fumes was found to be 20.7 g/(m3·h). Additionally, the study determined the kinetic parameters for the biodegradation of oils (Kc and Vmax) to be 4.69 mg L−1 and 0.026 h-1, respectively, while the enzyme activities of lipase and catalase stabilized at 75.50 U/mgprots and 67.95 U/mgprots. The microbial consortium identified in the biofilms belonged to the phylum Proteobacteria and consisted mainly of Sphingomonas, Mycobacterium, and Lactobacillus, among others.

Biodegradation of Congo Red Dye Using Lysinibacillus Species in a Moving Bed Biofilm Reactor: Continuous Study and Kinetic Evaluation.

The objective of this work was to develop a low-cost and efficient biocarrier for biodegradation of azo dye (i.e., Congo red (CR) dye). The potential bacterial species, i.e., Lysinibacillus fusiformis KLM1 and Lysinibacillus macrolides KLM2, were isolated from the dye-contaminated site. These bacterial species were immobilized onto the polypropylene-polyurethane foam (PP-PUF) and employed in a moving bed biofilm reactor (MBBR) for the treatment of CR dye. The effectiveness of the MBBR was investigated by operating the bioreactor in a continuous mode at various initial CR dye concentrations (50-250mg/L) for 113days. The removal efficiency was found in the range of 88.4-64.6% when the initial dye concentration was varied from 50 to 250mg/L. The maximum elimination capacity (EC) of 213.18mg/L.d was found at 250mg/L of CR dye concentration. In addition, the CR dye utilization rate in the MBBR was studied by using two kinetics, namely, first-order and second-order (Grau) models. The high regression coefficients (R2 > 0.97) and the satisfactory root mean square (RMSE) values (0.00096-0.02610) indicated the reasonable prediction of CR dye degradation rate by the Grau model.

Biodegradation of isobutyraldehyde with high removal efficiency by using a modified biotrickling filter

Isobutyraldehyde is a kind of Volatile organic compounds (VOCs) released by the butanol industry, which has a low olfactory threshold and high hydrophobicity, causing harm to the environment. Biotrickling filters have been widely used for VOCs treatment. Herein, a biotrickling filter (BTF-1) inoculated with the domesticated bacteria was used to degrade isobutyraldehyde. However, low dissolved oxygen, unstable temperature, high-pressure drop, and excessive foams were observed due to structural and technical problems. Hence, a modified BTF-2 was established to revise these problems by adding an oxygenation device, separating the tower kettle, and adding a recirculating water layer. Finally, the maximum elimination capacity (EC) (195 g/(m3·h)) and average removal efficiency (RE) (90%) were achieved at an empty bed residence time (EBRT) of 46 s and inlet flow rate of 500 L/h. Furthermore, 16S rDNA analysis identified Clostridiales as the prominent bacteria group in charge of isobutyraldehyde degradation. Overall, the feasibility and efficiency of using a biotrickling filter for isobutyraldehyde treatment were confirmed in this investigation, which would provide technical support for the industrial scale-up of BTF to biodegrade isobutyraldehyde.

Molecular mechanisms of the development of the phenomena of peripheral and central sensitization in rheumatoid arthritis

Modern tactics for the treatment of rheumatoid arthritis is aimed at achieving remission or low activity of the disease, the maximum elimination of the manifestations of the disease and the restoration of physical and social activity of patients. At the same time, despite the wide range of the most modern pathogenetic agents, a good therapeutic response can’t be obtained in all cases. A difficult problem is the so-called rheumatoid arthritis RA (difficult to treat), in which two or more sequentially prescribed genetically engineered biological drugs or JAK inhibitors are ineffective. One of the important factors negatively affecting the outcome of RA treatment are functional disorders of the nociceptive system, such as peripheral and central sensitization. These phenomena, associated with persistent activation of nociceptive neurons and the development of nociplastic changes, are caused by systemic autoimmune inflammation and the influence of various cytokines and chemokines on the neuronal membrane. This review considers the molecular biological aspects of the formation of peripheral and central sensitization in RA, with a separate analysis of the pathogenetic role of individual interleukins.

Performance Evaluation of a Novel Bio-Trickling Filter for Styrene Waste Gas Treatment

In recent years, styrene waste gas has become a hot issue in the waste gas treatment industry due to its hydrophobicity and easy polymerization. This study is aimed at the problems of long empty bed residence time and low removal capacity of waste gas from styrene degradation by bio-trickling filter (BTF). A novel bio-trickling filter (NBTF) that we designed was used to explore the effects of styrene inlet concentration, empty bed residence time (EBRT), and starvation period on the performance of NBTF in the degradation of styrene waste gas. The experimental results show that the NBTF can be started in 17 days; when the inlet concentration was lower than 1750 mg/m3 and the EBRT was 59.66 s, the removal efficiency (RE) of styrene can reach 100%. When the inlet concentration was 1000 mg/m3 and the EBRT was greater than 39.77 s, styrene waste gas can also be completely degraded. The above proves that NBTF can complete the degradation of styrene waste gas with high concentration under the condition of short EBRT; in the whole operation process, the maximum elimination capability (EC) of styrene was 112.96 g/m3/h, and NBTF shows excellent degradation performance of styrene. When the starvation period was 2 days, 7 days and 15 days, respectively, NBTF can recover high degradation performance within 2 days after restart. The NBTF has good operation performance in 124 days of operation, which proves that the NBTF can effectively degrade styrene waste gas. This provides a reference basis for industrial treatment of styrene waste gas in the future.

Population Pharmacokinetics as a Tool to Reevaluate the Complex Disposition of Ethanol in the Fed and Fasted States.

The pharmacokinetics (PK) of ethanolare important in pharmacology and therapeutics because of potential drug-alcohol interactions as well as in forensic science when alcohol-related crimes are investigated.The PK of ethanol have been extensively studied since the 1930s, although some issues remain unresolved, such as the significance of first-pass metabolism, whether zero-order kinetics apply, and the effects of food on bioavailability. We took advantage of nonlinear mixed-effects modeling to describe blood-alcohol concentration (BAC) profiles derived from 3 published clinical studies involving oral, intraduodenal, and intravenous administration of ethanol with and without food. The overall data set included 1510 BACs derived from 72 healthy subjects (60 men, 12 women) aged between 20 and 60 years. Two-compartment models with first-order absorption and Michaelis-Menten elimination kinetics adequately described the BAC profiles. Food intake had 2 separate effects: It reduced the absorption rate constant and accelerated the maximum elimination rate. Estimates of the maximum elimination rate(fasted) and the food effect (as a factor) were 6.31 g/h (95%CI, 6.04-6.59 g/h) and 1.39-fold (95%CI, 1.33-1.46-fold), respectively. Simulations showed thatthe area under the BAC-time curve (AUC) was smaller with lower input rate of ethanol, irrespective of any first-pass metabolism. The AUC from time 0 to 10 hours for a 75-kg subject was 2.34 g• h/L (fed) and 3.83 g• h/L (fasted) after an oral dose of 45 g ethanol. This difference was mainly attributable to the food effect on ethanol elimination and depended less on the absorption rate. Our new approach to explain the complex human PK of ethanol may help when BAC predictions are made in clinical pharmacology and forensic medicine.

Efficacy of combined caprylic acid and thymol treatments for inactivation of Listeria monocytogenes on enoki mushrooms in household and food-service establishments

Raw enoki mushroom is a high-risk vector for listeriosis, which led to foodborne outbreaks resulting in four deaths in the United States in 2020. This study aimed to investigate the washing method for the inactivation of L. monocytogenes in enoki mushrooms for household and food service establishments. Five methods of washing fresh agricultural products without using disinfectants were selected: (1) rinsing under running water (2 L/min, 10 min), (2–3) dipping in water (200 ml/20 g) at 22 or 40 °C for 10 min, and using (4) 10% NaCl or (5) 5% vinegar at 22 °C for 10 min. The antibacterial efficacy of each washing method along with the final rinse was tested with enoki mushrooms inoculated with a 3-strain cocktail of L. monocytogenes (ATCC 19111, 19115, 19117; ca. 6 log CFU/g). The 5% vinegar showed a significant difference in antibacterial effect compared to the other treatments except 10% NaCl (P < 0.05), with the maximum elimination of L. monocytogenes by 1.23 log CFU/g. Therefore, a disinfectant for enoki mushrooms that can complement the commonly used washing method was developed using antimicrobials (caprylic acid, CA: 0, 0.20, 0.40%; thymol, TM: 0, 0.075, 0.15%). By combined treatment of 0.40% CA and 0.15% TM at 22 °C for 10 min, L. monocytogenes was completely inactivated (>5.55 log reduction CFU/g) and did not recover after enrichment, although individual treatments of antimicrobials showed low bactericidal effects of <1.50 log reduction CFU/g. The bacterial membrane disintegration induced by the disinfectant was analyzed through flow cytometry. Additionally, the sensory scores (odor and appearance) and color parameters (L*, a*, and b*) of enoki mushrooms treated with the disinfectant were not significantly different from those of enoki mushrooms washed with water (P > 0.05). Our findings suggest a washing disinfectant consisting of low concentrations of CA and TM with synergistic antibacterial effects without quality deterioration that can ensure the safe consumption of raw enoki mushrooms in homes and food service establishments.

Improvement of bioenergy generation using innovative application of food waste materials for coating carbon nanotubes-loaded bioanode in 3D-microbial fuel cells

In this study, an innovative use of date seeds and banana peels wastes coupled with multi walled carbon nanotubes (MWCNTs) was applied for the first time for coating the anodic electrodes in 3D-MFCs to improve power generation. Two of identically styled and designed dual chamber 3D-MFCs were set up and operated in a continuous manner for simultaneous treatment of carwash wastewater and energy recovery. Both MFCs were packed with acid activated irregular-shaped graphite granules (ISGG) coated with MWCNTs coupled with date seeds powder in 3D-MFC1 and with banana peels powder in 3D-MFC2. The results revealed that maximum elimination efficiencies of COD, sodium dodecyl sulfate (SDS), as well as oil and grease (O&G) were 99.4%, 99.9% and 98.2%, respectively in the 3D-MFC1 while they were 96.8%, 99.9% and 93.9%, respectively in the 3D-MFC2. Maximum power density of 1072 mW/m3 and 730 mW/m3 were observed in the 3D-MFC1 and 3D-MFC2, respectively.

Effects of various COD/NO ratios on NOx removal performance and microbial communities in a BTF−ABR integrated system

In this study, we investigated the removal performance of NOx and stability of the biotrickling filter−anaerobic baffled reactor (BTF−ABR) integrated system at various chemical oxygen demand (COD)/NO ratios (12.18, 6.71, and 4.63 in stages 1, 2, and 3, respectively) under 3.5% O2 and 50 ± 0.5 °C conditions for the first time. The results showed that the maximum elimination capacity of NOx was 4.46, 8.16, and 11.58 g/(m3·h) in stages 1, 2, and 3, respectively. The minimum operating cost in terms of glucose was 4.79 g of glucose/g of NO. However, a COD/NO ratio of 12.18 resulted in a wastage of carbon sources, while a COD/NO ratio of 4.63 led to about 20 mg/m3 N2O emission at the end of the study. Highly bacteria diversity and positive co-occurrence networks at the COD/NO ratio of 6.71 were the main reasons for no intermediate accumulation or N2O emission. Analysis of real-time polymerase chain reaction (PCR) indicated that nirS and norB were more sensitive to the changes in the COD/NO ratios than other denitrifying genes, and the denitrifiers with nirS filled more ecological niches as the NOx increased. Furthermore, although the decrease in COD/NO ratio significantly impacted the microbial community structure, the NOx RE was stabilized at over 90% because the micro-aerobic environment produced by ABR combined highly diverse microbes and functions in BTF, as well as the coordinated expression of denitrifying genes. Achieving efficient, stable, and low-cost denitrification is feasible in this BTF−ABR integrated system.

Application of loofah and insects in a bio-trickling filter to relieve clogging

Bio-trickling filters (BTFs) use an inert filler to purify pollutants making them prone to clogging due to bacterial accumulation. To investigate the performance of a non-inert filler in BTF and its cooperation with insects to relieve clogging, a vertical BTF was constructed with a loofah/Pall ring/polydimethylsiloxane composite filler and selected bacteria to purify toluene. The BTF was started up within 17 d and restarted within 3 d after starvation for 12–16 d. Its average removal efficiency was >90% at steady state. The maximum elimination capacity of 86.4 g·(m3·h)−1 was obtained at a volume capacity of 96.2 g·(m3·h)−1. The introduction of holometabolous insects (Clogmia albipunctata) rapidly removed the biofilm and accelerated the degradation of the loofah, which alleviated clogging. Furthermore, confocal laser scanning microscope (CLSM) observations showed that the biofilm polysaccharides were difficult to remove, while lipids were readily lost. Analysis of microbial diversity over time and space revealed that the dominant bacterium, Comamonas, was replaced by diverse microflora with no obvious dominant genus. Insect introduction and loofah migration had little effect on the evolution of microflora. This study provides a promising approach to operating BTFs with less clogging.

Mechanisms of N, N-dimethylacetamide-facilitated n-hexane removal in a rotating drum biofilter packed with bamboo charcoal-polyurethane composite

n-Hexane and N, N-dimethylacetamide (DMAC) are two major volatile organic compounds (VOCs) discharged from the pharmaceutical industry. To enhance DMAC-facilitated n-hexane removal, we investigated the simultaneous removal of multiple pollutants in a rotating drum biofilter packed with bamboo charcoal-polyurethane composite. After adding 800 mg·L−1 DMAC, the n-hexane removal efficiency increased from 59.4 % to 83.1 % under the optimized conditions. The maximum elimination capacity of 10.0 g·m−3·h−1n-hexane and 157 g·m−3·h−1 DMAC were obtained. The biomass of bamboo charcoal-polyurethane and the ratio of protein-to-polysaccharide in extracellular polymeric substances were significantly increased compared with the non-DMAC stage, which is attributed to increased carbon utilization. In addition, Na+ K+-ATPase was positively correlated with increasing electron transport system activity, which was 1.98 and 1.36 times greater. Hydrophilic DMAC improved the bioavailability of hydrophobic n-hexane and benefited bacterial metabolism. Co-degradation of n-hexane and DMAC system can be used for other volatile organic pollutants.

Achieving efficient biodegradation of hydrophobic toluene via the enhancement of β-cyclodextrin and atomization

Industrial production processes produce large amounts of toluene, endangering human health and air quality. The hydrophobicity of toluene limits the removal performance in biotrickling filters (BTFs). To improve the removal efficiency of toluene in BTFs, β-cyclodextrin (β-CD) coupled with atomization was employed in this study. The results showed that β-CD and atomization significantly enhanced the biodegradation of toluene and the maximum elimination capacity reached 90.9 g/(m3·h). At the optimized conditions that β-CD additional of 12.5 g/L and an atomizer with power of 19.8 W, the removal efficiency of toluene was up to 92.6 % (inlet concentration, 0.7 g/m3), which was 17 % higher than that of the control. The use of β-CD combined with atomization increased the extracellular protein and polysaccharide contents. The biofilm surface hydrophobicity of the experimental group reached 79 % which was 1.34 times that of the control. The abundance of toluene degrading bacteria, Pseudomonas sp. and Mycobacterium sp., significantly increased under β-CD with atomization. The addition of β-CD with atomization increased mass transfer, the relative hydrophobicity of biofilm, and the functional microbes so as to enhance treatment of toluene. This study may provide guidelines for the design and technological development of hydrophobic toluene control in industrial waste gas.

Improving NH3 and H2S removal efficiency with pilot-scale biotrickling filter by co-immobilizing Kosakonia oryzae FB2-3 and Acinetobacter baumannii L5-4.

In this study, two NH4+-N and S2- removal strains, namely, Kosakonia oryzae (FB2-3) and Acinetobacter baumannii (L5-4), were isolated from the packing materials in a long-running biotrickling filter (BTF). The removal capacities of combined FB2-3 and L5-4 (FB2-3 + L5-4) toward 100mg L-1 of NH4+-N and 200mg L-1 of S2- reached 97.31 ± 1.62% and 98.57 ± 1.12% under the optimal conditions (32.0°C and initial pH = 7.0), which were higher than those of single strain. Then, FB2-3 and L5-4 liquid inoculums were prepared, and their concentrations respectively reached 1.56 × 109CFUmL-1 and 1.05 × 109CFUmL-1 by adding different resuspension solutions and protective agents after 12-week storage at 25°C. Finally, pilot-scale BTF test showed that NH3 and H2S in the real exhaust gases from a pharmaceutical factory were effectively removed with removal rates > 87% and maximum elimination capacities were reached 136g (NH3) m-3h-1 and 176g (H2S) m-3h-1 at 18°C-34 °C and pH 4.0-7.0 in the BTF loaded with bamboo charcoal packing materials co-immobilized with FB2-3 and L5-4. After co-immobilization of FB2-3 and L5-4, in the bamboo charcoal packing materials, the new microbial diversity composition contained the dominant genera of Acinetobacter, Mycobacterium, Kosakonia, and Sulfobacillus was formed, and the diversity of entire bacterial community was decreased, compared to the control. These results indicate that FB2-3 and L5-4 have potential to be developed into liquid ready-to-use inoculums for effectively removing NH3 and H2S from exhaust gases in BTF.

Linezolid Population Pharmacokinetics to Improve Dosing in Cardiosurgical Patients: Factoring a New Drug-Drug Interaction Pathway.

Linezolid-induced myelosuppression limits optimal therapy in cardiosurgical patients with deep-seated infections at current doses. Adult patients who received a cardiac surgery intervention and linezolid for a documented or presumed serious gram-positive infection were evaluated. Therapeutic monitoring data, dosing, concomitant medications, and other pertinent laboratory data were collected retrospectively. A population pharmacokinetic model was constructed to identify covariates and test potential drug-drug interactions that may account for interpatient variability. Simulations from the final model identified doses that achieve a target therapeutic trough concentration of 2-8 mg/L. This study included 150 patients (79.3% male) with sepsis and hospital-acquired pneumonia in 71.7% as the primary indication. The population had a median (minimum-maximum) age, body weight, and estimated glomerular filtration rate (eGFR) of 66 (30-85) years, 76 (45-130) kg, and 46.8 (4.9-153.7) mL/minute, respectively. The standard linezolid dosage regimen achieved the therapeutic range in only 54.7% of patients. Lower-than-standard doses were necessary in the majority of patients (77%). A 2-compartment Michaelis-Menten clearance model with weight, kidney function, and the number of interacting drugs identified as covariates that best fit the concentration-time data was used. Cyclosporine had the greatest effect on lowering the maximum elimination rate (Vmax) of linezolid. Empiric linezolid doses of 300-450 mg every 12 hours based on eGFR and the number of interacting medications are suggested by this analysis. Lower empiric linezolid doses in cardiosurgical patients may avoid toxicities. Confirmatory studies are necessary to verify these potential drug interactions.

Performance of integral polypropylene packing coated with polydimethylsiloxane in biotrickling filter for toluene elimination

Biotrickling filters (BTFs) for volatile organic compounds (VOCs) have attracted tremendous research attention in the field of environmental engineering. However, the problem of clogging occurred during the long-term operation limits their practical applications. To alleviate the clogging, an integral polypropylene (PP) packing coated with polydimethylsiloxane (PDMS) was prepared, and in combination with fungus, its performance was investigated for toluene elimination. Two laboratory-scale BTFs were started at low toluene concentrations of 200–900 mg·m−3. Subsequently, a series of experiments were conducted at toluene concentrations of 47–2906 mg·m−3, with empty bed residence time (EBRT) values of 50 and 40 s. Toluene removal efficiency reached 100 % at the inlet toluene concentration of 296–560 mg∙m−3 for EBRT of 50 s. The maximum elimination capacity (EC) of 98 g∙m−3∙h−1 was obtained at an inlet toluene load of 117.67 g∙m−3∙h−1. Clogging was relieved by manual cleanup, and the BTFs were operated steadily for nearly 8 months. CO2 production was monitored during the whole operation, and toluene mineralization was evaluated simultaneously. Furthermore, the biofilm structure and microbial diversity were analyzed.

Klebsiella oxytoca (EN-B2): A novel type of simultaneous nitrification and denitrification strain for excellent total nitrogen removal during multiple nitrogen pollution wastewater treatment

The poor total nitrogen (TN) removal rate achieved using microorganisms to treat wastewater polluted with multiple types of nitrogen was improved using a novel simultaneous nitrification and denitrification strain (Klebsiella oxytoca EN-B2). Strain EN-B2 rapidly eliminated ammonium, nitrate, and nitrite, giving maximum elimination rates of 4.58, 7.46, and 7.83 mg/(L h), respectively, equivalent to TN elimination rates of 4.35, 6.92, and 7.11 mg/(L h), respectively. The simultaneous nitrification and denitrification system gave ammonium and nitrite elimination rates of 7.14 and 9.17 mg/(L h), respectively, and a TN elimination rate ≥ 9.0 mg/(L h). Nitrogen balance calculations indicated that 51.22 %, 31.62 % and 46.82 % of TN in systems containing only ammonium, nitrite, and nitrate, respectively, were lost as nitrogenous gases. The ammonia monooxygenase, hydroxylamine oxidoreductase, nitrate reductase and nitrite reductase enzyme activities were determined. The results indicated that strain EN-B2 can be used to treat wastewater polluted with multiple types of nitrogen.

Population pharmacokinetics of sublingually administered tacrolimus in infants and young children with liver transplantation.

Pharmacokinetics of tacrolimus after sublingual administration is not characterized in paediatric liver transplant patients. Therefore, we aimed to develop a population pharmacokinetic model of sublingually administered tacrolimus in patients who cannot swallow the capsules due to their age, sedation status and/or mechanical ventilation during the first weeks post-transplantation. Demographic, clinical and pharmacological variables, including tacrolimus whole blood concentrations obtained from therapeutic drug monitoring and data from dense-sampling pharmacokinetic profiles, were recorded in 26 paediatric patients with biliary atresia who underwent liver transplantation between 2016 and 2021. Population pharmacokinetic analysis was performed with NONMEM v7.4. Disposition of tacrolimus was best characterized by a 2-compartment model with clearance achieving half of the maximum elimination capacity (CLMAX =4.1L/h) at 4.6days post-transplantation (T50 ). Compared to sedated patients, nonsedated status showed an increased first-order absorption rate constant (1.1 vs. 0.1h-1 ) and a 24% reduction in bioavailability (FNS ) at 14 days post-transplant. The model was able to explain the oral absorption pattern in nonsedated patients as the result of gut bioavailability (0.9) and hepatic extraction ratio, with the latter being responsible for first-pass effects. Estimates of interindividual variability remained moderate (25.9% for the gut bioavailability) to high (79.8% for the apparent volume of distribution of the central compartment, and 101% for T50 ). A population pharmacokinetic model of sublingually administered tacrolimus in paediatric patients was developed to characterize different absorption mechanisms. Once the model is externally validated, the effect of post-transplant time on clearance and the sedation status may be considered in routine dosing management.