Magic Angle Spinning NMR Research Articles

Evaluation of dental cements derived from mixtures of highly reactive ionomer glasses and bottle glass: Cement manipulation, mechanical, fluoride ion releasing, radiopaque and setting properties

ObjectivesTo evaluate the mechanical properties, fluoride release, radiopacity, and setting characteristics of dental cements derived from highly reactive ionomer glasses and bottle glass mixtures. MethodsTwo highly reactive glass series, LG99 and LG117, were synthesized, milled, sieved, and characterized using XRD and laser particle size analysis. These glasses were mixed with predetermined ratios of ground bottle glass, poly(acrylic acid), and aqueous tartaric acid to form glass ionomer cements. The cements' working time (WT), setting time (ST), fluoride release, radiopacity, compressive strength (CS), and elastic modulus (EM) were evaluated. Mean differences in CS were analyzed using multivariate ANOVA with Tukey’s post hoc test at p = 0.05. ResultsThe WT and ST for both groups ranged from 1.5 to 2.5 min. LG99 series cements showed significantly higher CS (∼65 MPa) and EM (∼2 GPa) than LG117 series (p < 0.05). Both series showed similar fluoride release profiles, peaking at 1.2 mmol/L at 28 days. Radiopacity for LG99 ranged from 0.97 to 1.34, while LG117 ranged from 0.60 to 0.95. Solid state 27Al magic-angle spinning-nuclear magnetic resonance (MAS NMR) confirmed the presence of Al(IV) and Al(VI), indicating setting completion by one day for both series. Bottle glass showed a chemical shift at 55.8 ppm, overlapping with LG99′s Al(IV) signal. The 19F MAS NMR spectra revealed Al-F and F-Sr(n) species in all glasses, with LG117 forming CaF2 after one day in deionized water. ConclusionMixtures of highly reactive ionomer glass and bottle glass produced cements with satisfactory properties for dental applications. Further research is needed to optimize their formulation and properties.

Dynamics in the Intact fd Bacteriophage Revealed by Pseudo 3D REDOR-Based Magic Angle Spinning NMR.

The development of robust NMR methodologies to probe dynamics on the atomic scale is vital to elucidate the close relations between structure, motion, and function in biological systems. Here, we present an automated protocol to measure, using magic-angle spinning NMR, the effective 13C-15N dipolar coupling constants between multiple spin pairs simultaneously with high accuracy. We use the experimental dipolar coupling constants to quantify the order parameters of multiple C-N bonds in the thousands of identical copies of the coat protein in intact fd-Y21M filamentous bacteriophage virus and describe its overall dynamics on the submillisecond time scale. The method is based on combining three pseudo three-dimensional NMR experiments, where a rotational echo double resonance (REDOR) dephasing block, designed to measure internuclear distances, is combined with three complementary 13C-13C mixing schemes: dipolar-assisted rotational resonance, through-bond transfer-based double quantum/single quantum correlation, and radio frequency driven recoupling. These mixing schemes result in highly resolved carbon spectra with correlations that are created by different transfer mechanisms. We show that the helical part of the coat protein undergoes a uniform small (∼30°) amplitude motion, while the N-terminus is highly flexible. In addition, our results suggest that the reduced mobility of lysine sidechains at the C-terminus are a signature of binding to the single stranded DNA.

Maximizing Relayed 1H Hyperpolarization Transfer by Slow-Fast MAS NMR Spectroscopy.

1H-detected dynamic nuclear polarization (DNP)-enhanced fast magic angle spinning (MAS) NMR experiments provide unprecedented sensitivity to study the structure and dynamics in advanced materials and biomolecules. However, in relayed DNP experiments, DNP enhancements decrease with faster MAS rates, which is detrimental for sensitivity. The decrease is because 1H-1H spin diffusion rates are significantly reduced at fast MAS frequencies. To improve sensitivity at these fast MAS rates, here, we propose to combine fast polarization build-up by relay at slow MAS rate with high-resolution 1H NMR at fast MAS for acquisition. We perform experiments on l-histidine·HCl·H2O with MAS rates of up to 65 kHz using a 0.7 mm DNP probe at 18.8 T and 100 K. We obtain a 35% improvement in sensitivity in experiments where the sample is polarized at 20 kHz MAS and where the signal is acquired at 60 kHz MAS.

Resolving Atomic-Level Dynamics and Interactions of High-Molecular-Weight Hyaluronic Acid by Multidimensional Solid-State NMR.

High-molecular-weight (HMW) hyaluronic acid (HA) is a highly abundant natural polysaccharide and a fundamental component of the extracellular matrix (ECM). Its size and concentration regulate tissues' macro- and microenvironments, and its upregulation is a hallmark feature of certain tumors. Yet, the conformational dynamics of HMW-HA and how it engages with the components of the ECM microenvironment remain poorly understood at the molecular level. Probing the molecular structure and dynamics of HMW polysaccharides in a hydrated, physiological-like environment is crucial and also technically challenging. Here, we deploy advanced magic-angle spinning (MAS) solid-state NMR spectroscopy in combination with isotopic enrichment to enable an in-depth study of HMW-HA to address this challenge. This approach resolves multiple coexisting HA conformations and dynamics as a function of environmental conditions. By combining 13C-labeled HA with unlabeled ECM components, we detect by MAS NMR HA-specific changes in global and local conformational dynamics as a consequence of hydration and ECM interactions. These measurements reveal atom-specific variations in the dynamics and structure of the N-acetylglucosamine moiety of HA. We discuss possible implications for interactions that stabilize the structure of HMW-HA and facilitate its recognition by HA-binding proteins. The described methods apply similarly to the studies of the molecular structure and dynamics of HA in tumor contexts and in other biological tissues as well as HMW-HA hydrogels and nanoparticles used for biomedical and/or pharmaceutical applications.

Probing Noncovalent Interactions by Fast Magic-Angle Spinning NMR at 100 kHz and More.

Noncovalent interactions are the basis for a large number of chemical and biological molecular-recognition processes, such as those occurring in supramolecular chemistry, catalysis, solid-state reactions in mechanochemistry, protein folding, protein-nucleic acid binding, and biomolecular phase separation processes. In this perspective article, some recent developments in probing noncovalent interactions by proton-detected solid-state Nuclear Magnetic Resonance (NMR) spectroscopy at Magic-Angle Spinning (MAS) frequencies of 100 kHz and more are reviewed. The development of MAS rotors with decreasing outer diameters, combined with the development of superconducting magnets operating at high static magnetic-field strengths up to 28.2 T (1200 MHz proton Larmor frequency) improves resolution and sensitivity in proton-detected solid-state NMR, which is the fundamental requirement for shedding light on noncovalent interactions in solids. The examples reported in this article range from protein-nucleic acid binding in large ATP-fueled motor proteins to a hydrogen-π interaction in a calixarene-lanthanide complex.

Intra-lanthanide separation performance of DOTP: Solid-phase extraction and selective precipitation studies

The applicability of 1,4,7,10-Tetraazacyclododecane-1,4,7,10-tetra(methylene phosphonic acid) (DOTP) for intra-lanthanide (Ln) separation was investigated through two approaches: the synthesis of inorganic–organic hybrid sorbents and selective precipitation in an aqueous solution. Hybrid sorbents combining zirconium oxide and DOTP were fabricated through post-synthetic grafting and hydrothermal synthesis. The successful syntheses were verified by FTIR and 31P magic-angle spinning (MAS) NMR spectroscopies. All the hybrid sorbents showed a lanthanide uptake of approximately 10–20 μmol/g at pH 3 and displayed only moderate selectivity, with the highest separation factor (SF) of about 10 for Lu3+ over La3+. In contrast, the selective precipitation of lanthanides by DOTP in an aqueous solution was successful in the presence of Cu2+. When a Cu-DOTP complex was introduced into a La/Lu equimolar solution, lanthanide ions were selectively precipitated with an SF of approximately 30–190. When the initial stoichiometry was set to Ln:Cu-DOTP = 8:1, roughly 95 % of the lanthanides in the precipitate were Lu3+, regardless of the pH ranging from 3 to 5. This precipitation process demonstrated selectivity even for adjacent lanthanide pairs. The selectivity is assumed to be a result of structural variations in the precipitates of Ln-Cu-DOTP, which is supported by the characterization results obtained from X-ray diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and UV–Vis spectroscopy. The findings presented in this study indicate that DOTP has the potential for use in the selective extraction of lanthanides, which may offer promising advancements in intra-lanthanide separation.

New Structure of Aeromonas salmonicida O-Polysaccharide Isolated from Ill Farmed Fish.

The diversity of O-polysaccharides (O-antigens) among 28 Aeromonas salmonicida strains isolated from ill fish has been determined by using high-resolution magic angle spinning (HR MAS) NMR spectroscopy. The new O-polysaccharide has been identified in two isolates. This new structure was investigated by 1H and 13C NMR spectroscopy and matrix-assisted laser-desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). The following structure of the linear hexasaccharide repeating unit of A. salmonicida O-antigen has been established: →3)-α-L-Rhap-(1→3)-α-D-ManpNAc-(1→2)-β-D-Glcp-(1→3)-α-L-Rhap2OAc4OAc-(1→3)-β-D-ManpNAc-(1→3)-α-D-Glcp-(1→. This new A. salmonicida O-polysaccharide was detected among two isolates collected from trout and turbot fish in 2010 and 2011, respectively. Further investigations should be conducted to evaluate the distribution of this new O-polysaccharide among a larger collection of isolates, depending on their geographic origin, the species of fish, and the health status of the fish.

Revealing the Local Structure and Dynamics of the Solid Li Ion Conductor Li3P5O14.

The development of fast Li ion-conducting materials for use as solid electrolytes that provide sufficient electrochemical stability against electrode materials is paramount for the future of all-solid-state batteries. Advances on these fast ionic materials are dependent on building structure-ionic mobility-function relationships. Here, we exploit a series of multinuclear and multidimensional nuclear magnetic resonance (NMR) approaches, including 6Li and 31P magic angle spinning (MAS), in conjunction with density functional theory (DFT) to provide a detailed understanding of the local structure of the ultraphosphate Li3P5O14, a promising candidate for an oxide-based Li ion conductor that has been shown to be a highly conductive, energetically favorable, and electrochemically stable potential solid electrolyte. We have reported a comprehensive assignment of the ultraphosphate layer and layered Li6O16 26- chains through 31P and 6Li MAS NMR, respectively, in conjunction with DFT. The chemical shift anisotropy of the eight resonances with the lowest 31P chemical shift is significantly lower than that of the 12 remaining resonances, suggesting the phosphate bonding nature of these P sites being one that bridges to three other phosphate groups. We employed a number of complementary 6,7Li NMR techniques, including MAS variable-temperature line narrowing spectra, spin-alignment echo (SAE) NMR, and relaxometry, to quantify the lithium ion dynamics in Li3P5O14. Detailed analysis of the diffusion-induced spin-lattice relaxation data allowed for experimental verification of the three-dimensional Li diffusion previously proposed computationally. The 6Li NMR relaxation rates suggest sites Li1 and Li5 (the only five-coordinate Li site) are the most mobile and are adjacent to one another, both in the a-b plane (intralayer) and on the c-axis (interlayer). As shown in the 6Li-6Li exchange spectroscopy NMR spectra, sites Li1 and Li5 likely exchange with one another both between adjacent layered Li6O16 26- chains and through the center of the P12O36 12- rings forming the three-dimensional pathway. The understanding of the Li ion mobility pathways in high-performing solid electrolytes outlines a route for further development of such materials to improve their performance.

Initial Litter Chemistry and UV Radiation Drive Chemical Divergence in Litter during Decomposition.

Litter's chemical complexity influences carbon (C) cycling during its decomposition. However, the chemical and microbial mechanisms underlying the divergence or convergence of chemical complexity under UV radiation remain poorly understood. Here, we conducted a 397-day field experiment using 13C cross-polarization magic-angle spinning nuclear magnetic resonance (13C-CPMAS NMR) to investigate the interactions among the initial chemistry, microbial communities, and UV radiation during decomposition. Our study found that the initial concentrations of O-substituted aromatic C, di-O-alkyl C, and O-alkyl C in Deschampsia caespitosa were higher than those in Kobresia tibetica. Litter's chemical composition exhibited divergent patterns based on the initial chemistry, UV radiation, and decay time. Specifically, D. caespitosa consistently displayed higher concentrations of di-O-alkyl C and O-alkyl C compared to K. tibetica, regardless of the UV exposure and decay time. Additionally, litter's chemical complexity was positively correlated with changes in the extracellular enzyme activities, particularly those involved in lignin, cellulose, and hemicellulose degradation, which accounted for 9%, 20%, and 4% of the variation in litter's chemical complexity, respectively. These findings highlighted the role of distinct microbial communities in decomposing different C components through catabolism, leading to chemical divergence in litter. During the early decomposition stages, oligotrophic Planctomycetes and Acidobacteria metabolized O-alkyl C and di-O-alkyl C under UV-blocking conditions. In contrast, copiotrophic Actinobacteria and Chytridiomycota utilized these components under UV radiation exposure, reflecting their ability to thrive under UV stress conditions due to their rapid growth strategies in environments rich in labile C. Our study revealed that the inherent differences in the initial O-alkyl C and di-O-alkyl C contributed to the chemical divergence, while UV radiation further influenced this divergence by shifting the microbial community composition from oligotrophic to copiotrophic species. Thus, differences in the initial litter chemistry, microbial community, and UV radiation affected the quantity and quality of plant-derived C during decomposition.

Quantitative structural characterization of LiNbO3-SiO2 glass-ceramics by multinuclear solid-state NMR

This study presents a detailed structural analysis of the glass-to-crystal transition in the technologically important LiNbO3–SiO2 glass system, focusing on the composition 35Li2O–25Nb2O5–40SiO2 known for its exceptional second harmonic generation (SHG) response in glass-ceramics. We develop a comprehensive solid-state NMR protocol to quantify major and minor fractions of elusive nanocrystalline phases and the residual glass composition, overcoming limitations of techniques such as X-ray diffraction and Raman spectroscopy. By employing 7Li satellite transition difference spectroscopy and 93Nb magic-angle spinning (MAS) NMR, we achieve quantification of crystalline fractions down to 1%. By combining all the complementary 6Li, 7Li, 29Si, and 93Nb MAS NMR experiments, we also deduce the composition of the residual glass. Short crystallization times (up to 120 min) at 640 °C result in nanocrystalline LiNbO3, whereas crystallization for 1440 min at this temperature additionally yields two Li2Si2O5 polymorphs and Li2SiO3. 7Li spin echo and 7Li{93Nb} W-RESPDOR NMR spectroscopy indicate that LiNbO3 crystallizes in specific domains leaving behind SiO2-rich residual glassy domains. This work offers a time-efficient and versatile NMR protocol for characterizing crystalline and residual glass components in nanocrystalline glass-ceramics in the LiNbO3–SiO2 system and beyond, providing valuable insights into the crystallization process which is not possible with other techniques.

Harnessing Nuclear Magnetic Resonance Spectroscopy to Decipher Structure and Dynamics of Clathrate Hydrates in Confinement: A Perspective.

This perspective outlines recent developments in the field of NMR spectroscopy, enabling new opportunities for in situ studies on bulk and confined clathrate hydrates. These hydrates are crystalline ice-like materials, built up from hydrogen-bonded water molecules, forming cages occluding non-polar gaseous guest molecules, including CH4, CO2 and even H2 and He gas. In nature, they are found in low-temperature and high-pressure conditions. Synthetic confined versions hold immense potential for energy storage and transportation, as well as for carbon capture and storage. Using previous studies, this report highlights static and magic angle spinning NMR hardware and strategies enabling the study of clathrate hydrate formation in situ, in bulk and in nano-confinement. The information obtained from such studies includes phase identification, dynamics, gas exchange processes, mechanistic studies and the molecular-level elucidation of the interactions between water, guest molecules and confining interfaces.

Light-Induced 1H NMR Hyperpolarization in Solids at 9.4 and 21.1 T.

The inherently low sensitivity of nuclear magnetic resonance (NMR) spectroscopy is the major limiting factor for its application to elucidate structure and dynamics in solids. In the solid state, nuclear spin hyperpolarization methods based on microwave-induced dynamic nuclear polarization (DNP) provide a versatile platform to enhance the bulk NMR signal of many different sample formulations, leading to significant sensitivity improvements. Here we show that 1H NMR hyperpolarization can also be generated in solids at high magnetic fields by optical irradiation of the sample. We achieved this by exploiting a donor-chromophore-acceptor molecule with an excited state electron-electron interaction similar to the nuclear Larmor frequency, enabling solid-state 1H photochemically induced DNP (photo-CIDNP) at high magnetic fields. Through hyperpolarization relay, we obtained bulk NMR signal enhancements εH by factors of ∼100 at both 9.4 and 21.1 T for the 1H signal of o-terphenyl in magic angle spinning (MAS) NMR experiments at 100 K. These findings open a pathway toward a general light-induced hyperpolarization approach for dye-sensitized high-field NMR in solids.

19F Fast Magic-Angle Spinning NMR Spectroscopy on Microcrystalline Complexes of Fluorinated Ligands and the Carbohydrate Recognition Domain of Galectin-3.

Structural characterization of protein-ligand binding interfaces at atomic resolution is essential for improving the design of specific and potent inhibitors. Herein, we explored fast 19F- and 1H-detected magic angle spinning NMR spectroscopy to investigate the interaction between two fluorinated ligand diastereomers with the microcrystalline galectin-3 carbohydrate recognition domain. The detailed environment around the fluorine atoms was mapped by 2D 13C-19F and 1H-19F dipolar correlation experiments and permitted characterization of the binding interface. Our results demonstrate that 19F MAS NMR is a powerful tool for detailed characterization of protein-ligand interfaces and protein interactions at the atomic level.

Phosphorylated and carbamylated Kraft lignin for improving fire- and biological-resistance of Scots pine wood

In this study, Kraft lignin was modified by ammonium dihydrogen phosphate (ADP) and urea for achieving phosphorylation and carbamylation, aiming to protect wood against biological and fire attack. Scots pine (Pinus sylvestris L.) sapwood was impregnated with a water solution containing Kraft lignin, ADP, and urea, followed by heat treatment at 150 °C, resulting in changes in the properties of the Kraft lignin as well as the wood matrix. Infrared spectroscopy, 13C cross-polarisation magic-angle-spinning (MAS) nuclear magnetic resonance (NMR), and direct excitation single-pulse 31P MAS NMR analyses suggested the grafting reaction of phosphate and carbamylate groups onto the hydroxyl groups of Kraft lignin. Scanning electron microscopy with energy dispersive X-ray spectroscopy indicated that the condensed Kraft lignin filled the lumen as well as partially penetrating the wood cell wall. The modified Kraft lignin imparted fire-retardancy and increased char residue to the wood at elevated temperature, as confirmed by limiting oxygen index, microscale combustion calorimetry, and thermogravimetric analysis. The modified wood exhibited superior resistance against mold and decay fungi attack under laboratory conditions. The modified wood had a similar modulus of elasticity to the unmodified wood, while experiencing a reduction in the modulus of rupture.

Active species in chloroaluminate ionic liquids catalyzing low-temperature polyolefin deconstruction

Chloroaluminate ionic liquids selectively transform (waste) polyolefins into gasoline-range alkanes through tandem cracking-alkylation at temperatures below 100 °C. Further improvement of this process necessitates a deep understanding of the nature of the catalytically active species and the correlated performance in the catalyzing critical reactions for the tandem polyolefin deconstruction with isoalkanes at low temperatures. Here, we address this requirement by determining the nuclearity of the chloroaluminate ions and their interactions with reaction intermediates, combining in situ 27Al magic-angle spinning nuclear magnetic resonance spectroscopy, in situ Raman spectroscopy, Al K-edge X-ray absorption near edge structure spectroscopy, and catalytic activity measurement. Cracking and alkylation are facilitated by carbenium ions initiated by AlCl3-tert-butyl chloride (TBC) adducts, which are formed by the dissociation of Al2Cl7− in the presence of TBC. The carbenium ions activate the alkane polymer strands and advance the alkylation cycle through multiple hydride transfer reactions. In situ 1H NMR and operando infrared spectroscopy demonstrate that the cracking and alkylation processes occur synchronously; alkenes formed during cracking are rapidly incorporated into the carbenium ion-mediated alkylation cycle. The conclusions are further supported by ab initio molecular dynamics simulations coupled with an enhanced sampling method, and model experiments using n-hexadecane as a feed.

Trigonal Planar [PN3]4− Anion in the Nitridophosphate Oxide Ba3[PN3

AbstractNitridophosphates, with their primary structural motif of isolated or condensed PN4 tetrahedra, meet many requirements for high performance materials. Their properties are associated with their structural diversity, which is mainly limited by this specific building block. Herein, we present the alkaline earth metal nitridophosphate oxide Ba3[PN3]O featuring a trigonal planar [PN3]4− anion. Ba3[PN3]O was obtained using a hot isostatic press by medium‐pressure high‐temperature synthesis (MP/HT) at 200 MPa and 880 °C. The crystal structure was solved and refined from single‐crystal X‐ray diffraction data in space group R c (no. 167) and confirmed by SEM‐EDX, magic angle spinning (MAS) NMR, vibrational spectroscopy (Raman, IR) and low‐cost crystallographic calculations (LCC). MP/HT synthesis reveals great potential by extending the structural chemistry of P to include trigonal planar [PN3]4− motifs.

Trigonal Planar [PN3]4- Anion in the Nitridophosphate Oxide Ba3[PN3]O.

Nitridophosphates, with their primary structural motif of isolated or condensed PN4 tetrahedra, meet many requirements for high performance materials. Their properties are associated with their structural diversity, which is mainly limited by this specific building block. Herein, we present the alkaline earth metal nitridophosphate oxide Ba3[PN3]O featuring a trigonal planar [PN3]4- anion. Ba3[PN3]O was obtained using a hot isostatic press by medium-pressure high-temperature synthesis (MP/HT) at 200 MPa and 880 °C. The crystal structure was solved and refined from single-crystal X-ray diffraction data in space group R c (no. 167) and confirmed by SEM-EDX, magic angle spinning (MAS) NMR, vibrational spectroscopy (Raman, IR) and low-cost crystallographic calculations (LCC). MP/HT synthesis reveals great potential by extending the structural chemistry of P to include trigonal planar [PN3]4- motifs.

Electrostatic Surface Potentials and Chalcogen-Bonding Motifs of Substituted 2,1,3-Benzoselenadiazoles Probed via 77Se Solid-State NMR Spectroscopy.

Chalcogen bonds (ChB) are moderately strong, directional, and specific non-covalent interactions that have garnered substantial interest over the last decades. Specifically, the presence of two σ-holes offers great potential for crystal engineering, catalysis, biochemistry, and molecular sensing. However, ChB applications are currently hampered by a lack of methods to characterize and control chalcogen bonds. Here, we report on the influence of various substituents (halogens, cyano, and methyl groups) on the observed self-complementary ChB networks of 2,1,3-benzoselenadiazoles. From molecular electrostatic potential calculations, we show that the electrostatic surface potentials (ESP) of the σ-holes on selenium are largely influenced by the electron-withdrawing character of these substituents. Structural analyses via X-ray diffraction reveal a variety of ChB geometries and binding modes that are rationalized via the computed ESP maps, although the structure of 5,6-dimethyl-2,1,3-benzoselenadiazole also demonstrates the influence of steric interactions. 77Se solid-state magic-angle spinning NMR spectroscopy, in particular the analysis of the selenium chemical shift tensors, is found to be an effective probe able to characterize both structural and electrostatic features of these self-complementary ChB systems. We find a positive correlation between the value of the ESP maxima at the σ-holes and the experimentally measured 77Se isotropic chemical shift, while the skew of the chemical shift tensor is established as a metric which is reflective of the ChB binding motif.

Solid-State NMR Characterization of Mefloquine Resinate Complexes Designed for Taste-Masking Pediatric Formulations.

Mefloquine (MQ) is an antimalarial medication prescribed to treat or malaria prevention.. When taken by children, vomiting usually occurs, and new doses of medication frequently need to be taken. So, developing pediatric medicines using taste-masked antimalarial drug complexes is mandatory for the success of mefloquine administration. The hypothesis that binding mefloquine to an ion-exchange resin (R) could circumvent the drug's bitter taste problem was proposed, and solid-state 13C cross-polarization magic angle spinning (CPMAS) NMR was able to follow MQ-R mixtures through chemical shift and relaxation measurements. The nature of MQ-R complex formation could then be determined. Impedimetric electronic tongue equipment also verified the resinate taste-masking efficiency in vitro. Variations in chemical shifts and structure dynamics measured by proton relaxation properties (e.g., T1ρH) were used as probes to follow the extension of mixing and specific interactions that would be present in MQ-R. A significant decrease in T1ρH values was observed for MQ carbons in MQ-R complexes, compared to the ones in MQ (from 100-200 ms in MQ to 20-50 ms in an MQ-R complex). The results evidenced that the cationic resin interacts strongly with mefloquine molecules in the formulation of a 1:1 ratio complex. Thus, 13C CPMAS NMR allowed the confirmation of the presence of a binding between mefloquine and polacrilin in the MQ-R formulation studied.

Probing the role of the so-called inactive transition metal in conversion reactions: Not so inactive!

Ternary alloys such as TiSnSb and NbSnNb have been proposed as suitable negative electrode materials for lithium-ion batteries due to their large capacities and rate capability over many cycles. During lithiation, TiSnSb undergoes a conversion reaction, leading to the formation of multiple, highly reactive species. Previous in situ119Sn Mössbauer and 7Li magic-angle spinning (MAS) NMR spectroscopic studies suggested the phases Li3Sb, Li7Sn2, Li7Sn3 and Li2−xSb are formed at the end of lithiation alongside Ti or Nb nanoparticles. However, their stability and overall contribution to the conversion reaction is not yet fully understood. A series of model Sn- and Sb-based mixtures and alloys (both binary and ternary) have been investigated at the end of lithiation using 7Li MAS NMR spectroscopy to determine both the phases formed and their contribution to the conversion reaction. In all cases, a mixture of reactive lithiated phases and metallic nanoparticles are formed at the end of lithiation. Changing the nature of the inactive element in binary and ternary alloys changes the local Li environment and the observed chemical shifts. Considerable differences in chemical shift are observed for alloys relative to less intimate mixtures. The synthetic conditions used, particularly the intimacy of mixing achieved during synthesis, is key in determining both the phases formed and how the reaction proceeds, i.e., via a conversion or alloying reaction. The data presented show that the so-called “inactive” element and its nature in fact plays a key role in the conversion mechanism and therefore influences the ability for this class of materials to be commercialised in the future.