Low-spin Heme Signal Research Articles

Spectroscopic studies reveal that the heme regulatory motifs of heme oxygenase-2 are dynamically disordered and exhibit redox-dependent interaction with heme.

Heme oxygenase (HO) catalyzes a key step in heme homeostasis: the O2- and NADPH-cytochrome P450 reductase-dependent conversion of heme to biliverdin, Fe, and CO through a process in which the heme participates both as a prosthetic group and as a substrate. Mammals contain two isoforms of this enzyme, HO2 and HO1, which share the same α-helical fold forming the catalytic core and heme binding site, as well as a membrane spanning helix at their C-termini. However, unlike HO1, HO2 has an additional 30-residue N-terminus as well as two cysteine-proline sequences near the C-terminus that reside in heme regulatory motifs (HRMs). While the role of the additional N-terminal residues of HO2 is not yet understood, the HRMs have been proposed to reversibly form a thiol/disulfide redox switch that modulates the affinity of HO2 for ferric heme as a function of cellular redox poise. To further define the roles of the N- and C-terminal regions unique to HO2, we used multiple spectroscopic techniques to characterize these regions of the human HO2. Nuclear magnetic resonance spectroscopic experiments with HO2 demonstrate that, when the HRMs are in the oxidized state (HO2O), both the extra N-terminal and the C-terminal HRM-containing regions are disordered. However, protein NMR experiments illustrate that, under reducing conditions, the C-terminal region gains some structure as the Cys residues in the HRMs undergo reduction (HO2R) and, in experiments employing a diamagnetic protoporphyrin, suggest a redox-dependent interaction between the core and the HRM domains. Further, electron nuclear double resonance and X-ray absorption spectroscopic studies demonstrate that, upon reduction of the HRMs to the sulfhydryl form, a cysteine residue from the HRM region ligates to a ferric heme. Taken together with EPR measurements, which show the appearance of a new low-spin heme signal in reduced HO2, it appears that a cysteine residue(s) in the HRMs directly interacts with a second bound heme.

Role of the Iron Axial Ligands of Heme Carrier HasA in Heme Uptake and Release

The hemophore protein HasA from Serratia marcescens cycles between two states as follows: the heme-bound holoprotein, which functions as a carrier of the metal cofactor toward the membrane receptor HasR, and the heme-free apoprotein fishing for new porphyrin to be taken up after the heme has been delivered to HasR. Holo- and apo-forms differ for the conformation of the two loops L1 and L2, which provide the axial ligands of the iron through His(32) and Tyr(75), respectively. In the apo-form, loop L1 protrudes toward the solvent far away from loop L2; in the holoprotein, closing of the loops on the heme occurs upon establishment of the two axial coordination bonds. We have established that the two variants obtained via single point mutations of either axial ligand (namely H32A and Y75A) are both in the closed conformation. The presence of the heme and one out of two axial ligands is sufficient to establish a link between L1 and L2, thanks to the presence of coordinating solvent molecules. The latter are stabilized in the iron coordination environment by H-bond interactions with surrounding protein residues. The presence of such a water molecule in both variants is revealed here through a set of different spectroscopic techniques. Previous studies had shown that heme release and uptake processes occur via intermediate states characterized by a Tyr(75)-iron-bound form with open conformation of loop L1. Here, we demonstrate that these states do not naturally occur in the free protein but can only be driven by the interaction with the partner proteins.

Role of Calcium in Metalloenzymes: Effects of Calcium Removal on the Axial Ligation Geometry and Magnetic Properties of the Catalytic Diheme Center in MauG

MauG is a diheme enzyme possessing a five-coordinate high-spin heme with an axial His ligand and a six-coordinate low-spin heme with His-Tyr axial ligation. A Ca(2+) ion is linked to the two hemes via hydrogen bond networks, and the enzyme activity depends on its presence. Removal of Ca(2+) altered the electron paramagnetic resonance (EPR) signals of each ferric heme such that the intensity of the high-spin heme was decreased and the low-spin heme was significantly broadened. Addition of Ca(2+) back to the sample restored the original EPR signals and enzyme activity. The molecular basis for this Ca(2+)-dependent behavior was studied by magnetic resonance and Mössbauer spectroscopy. The results show that in the Ca(2+)-depleted MauG the high-spin heme was converted to a low-spin heme and the original low-spin heme exhibited a change in the relative orientations of its two axial ligands. The properties of these two hemes are each different than those of the heme in native MauG and are now similar to each other. The EPR spectrum of Ca(2+)-free MauG appears to describe one set of low-spin ferric heme signals with a large g(max) and g anisotropy and a greatly altered spin relaxation property. Both EPR and Mössbauer spectroscopic results show that the two hemes are present as unusual highly rhombic low-spin hemes in Ca(2+)-depleted MauG, with a smaller orientation angle between the two axial ligand planes. These findings provide insight into the correlation of enzyme activity with the orientation of axial heme ligands and describe a role for the calcium ion in maintaining this structural orientation that is required for activity.

EPR studies of wild-type and several mutants of cytochrome c oxidase from Rhodobacter sphaeroides: Glu286 is not a bridging ligand in the cytochrome a3-CuB center

Wild-type and several mutants of cytochrome c oxidase from Rhodobacter sphaeroides were characterized by EPR spectroscopy. A pH-induced g12 signal, seen previously in mammalian cytochrome oxidase and assigned to the presence of a bridging car☐yl ligand in the bimetallic cytochrome a3-CuB site, is found also in the bacterial enzyme. Mutation of glutamate-286 to glutamine inactivates the enzyme but does not affect this signal, demonstrating that the car☐yl group of this residue is not the bridging ligand. Three mutants, M106Q, located one helix turn below a histidine ligand to cytochrome a, and T352A as well as F391Q, located close to the bimetallic center, are shown to affect dramatically the low-spin heme signal of cytochrome a. These mutants are essentially inactive, suggesting that these three mutations result in alterations to cytochrome a that render the oxidase non-functional.

A comparison of three preparations of cytochrome c oxidase : Optical absorbance spectra, EPR spectra and reaction towards ligands

Three preparations of cytochrome c oxidase, the preparation as traditionally prepared in our laboratory as described by Van Buuren (1992; PhD Thesis, University of Amsterdam), a preparation according to Volpe and Caughey (Biochem. Biophys. Res. Commun. 61 (1974) 502–509) and a preparation of ‘fast’ cytochrome c oxidase (Brandt, U., Schägger, H. and Von Jagow, G. (1989) Eur. J. Biochem. 182, 705–711), are compared in their reaction with cyanide and carbon monoxide. The reaction with cyanide is nearly as fast for the Van Buuren preparation as for the ‘fast’ preparation, but much slower for the Volpe-Caughey preparation. Mixed-valence cytochrome c oxidase (cytochrome a 3 and Cu B reduced with carbon monoxide bound and cytochrome a and Cu A oxidized) is prepared by anaerobic incubation with carbon monoxide. With the Van Buuren preparation complete formation of the species takes 4 h, whereas with the Volpe-Caughey preparation it takes 20 h. Longer incubation under CO results in partial reduction of cytochrome a and Cu A. With the ‘fast’ preparation mixed-valence cytochrome c oxidase is formed after more than one day of incubation with CO, but it is stable for at least 3 days. The presence of oxidized cytochrome c did enhance the reactivity towards cyanide and towards carbon monoxide in cytochrome c oxidase of all three preparations. Furthermore, optical and EPR spectra of the preparations of cytochrome c oxidase are compared. The Volpe-Caughey preparation has an intense g′ = 12 EPR-signal, the Van Buuren preparation has hardly any g′ = 12 signal and the ‘fast’ preparation has no g′ = 12 signal. In the ‘fast’ preparation the low-spin heme signal is shifted (from g = 3.00 to g = 2.97). The absorbance spectra of the three preparations in the Soret region are similar with a maximum at 424 nm. Only the ‘fast’ preparation as isolated was completely oxidized, whereas the other preparations were partially reduced. It was concluded that differences in the reaction of cytochrome c oxidase with ligands are determined by the internal or external ligand bound to the cytochrome a 3-Cu B couple.

Electron paramagnetic resonance studies on cytochrome b-558 and peroxidases of pig blood granulocytes

Low-temperature electron paramagnetic resonance (EPR) spectrometry on granulocytes prepared from pig blood was carried out with concentrated cellular and subcellular fractions to characterize EPR signals of cytochrome b-588 (cyt b-558). A thick cell suspension (∼ 2 · 10 9 cells/ml), containing mostly neutrophils, showed typical high-spin EPR signals due to myeloperoxidase (MPO) and a low spin signal at a g value of around 3.2. A similar thick granulocyte suspension containing eosinophils showed not only these signals but also low spin heme signals at g values of 2.86, 2.13, and 1.66, which have been reported to be of cyt b-558 (Ueno et al. 1991, FEBS Lett. 281, 130–132). MPO and eosinophil peroxidase (EPO) were released from the membrane fractions with 50 mM phosphate buffer (pH 7.0) containing 1 M NaCl, and then were highly concentrated, in which no cyt b-558 was detected by absorption spectra. The signal at a g value of 2.86 was found only in the EPO fraction, suggesting that this signal is derived from a low-spin form of an EPO-complex, but neither from MPO nor cyt b-558. The O 2 −-forming NADPH oxidase associated in the membranes was solubilized with heptylthioglucoside at 0°C and concentrated up to 45 μM cyt b-558 with no modification of the heme moiety confirmed by its O 2 −-generating activity and lack of carbon monoxide-binding capacity. Cyt b-558 showed an anisotropic signal at a g value of 3.2 ± 0.05, which was cyanide-insensitive and reducible with reductants. The signal intensity was concentration dependent, suggesting that the g = 3.2 signal is characteristic of the low-spin heme iron in cyt b-558.

Hexaheme nitrite reductase from Desulfovibrio desulfuricans. Mössbauer and EPR characterization of the heme groups.

Mössbauer and EPR spectroscopy were used to characterize the heme prosthetic groups of the nitrite reductase isolated from Desulfovibrio desulfuricans (ATCC 27774), which is a membrane-bound multiheme cytochrome capable of catalyzing the 6-electron reduction of nitrite to ammonia. At pH 7.6, the as-isolated enzyme exhibited a complex EPR spectrum consisting of a low-spin ferric heme signal at g = 2.96, 2.28, and 1.50 plus several broad resonances indicative of spin-spin interactions among the heme groups. EPR redox titration studies revealed yet another low-spin ferric heme signal at g = 3.2 and 2.14 (the third g value was undetected) and the presence of a high-spin ferric heme. Mössbauer measurements demonstrated further that this enzyme contained six distinct heme groups: one high-spin (S = 5/2) and five low-spin (S = 1/2) ferric hemes. Characteristic hyperfine parameters for all six hemes were obtained through a detailed analysis of the Mössbauer spectra. D. desulfuricans nitrite reductase can be reduced by chemical reductants, such as dithionite or reduced methyl viologen, or by hydrogenase under hydrogen atmosphere. Addition of nitrite to the fully reduced enzyme reoxidized all five low-spin hemes to their ferric states. The high-spin heme, however, was found to complex NO, suggesting that the high-spin heme could be the substrate binding site and that NO could be an intermediate present in an enzyme-bound form.

Cytochrome aa3 from Sulfolobus acidocaldarius

The thermoacidophilic archaebacterium Sulfolobus acidocaldarius (DSM 369) extrudes protons when expending respiratory energy [Moll, R. & Schäfer, G. (1988) FEBS Lett. 232, 359-363]. Cytochromes of the membrane electron-transport systems are assumed to represent the proton pumps. Only a- and b-type cytochromes can be found; no c-type cytochromes are present. Of the two terminal oxidases [Anemüller, S. & Schäfer, G. (1989) FEBS Lett. 244, 451-455] one shows an absorption band at 604-605 nm, typical of cytochromes of the aa3 type. This hemoprotein has been solubilized from the membrane and purified to homogeneity. It exhibits distinct differences from known aa3-type oxidases. (a) It consists of a single polypeptide subunit of 38-40 kDa apparent molecular mass with two heme-a molecules and two copper ions. (b) In the oxidized state, absorption maxima are found at 421 nm and 597 nm, and in the reduced state at 439 nm and 601 nm; CO difference spectra suggest one heme to be a heme-a3 centre. (c) The redox potentials of the heme centres are +220 mV and +370 mV, respectively. (d) A high-spin heme signal at g = 6 is present in EPR spectra, which is more prominent than the low-spin heme signal at g = 3, the former already being present in the oxidized state. A signal at g = 2.1 may be due to one of the copper ions and is superimposed upon a minor free radical signal at g = 2. (e) Caldariella quinone was also isolated from the plasma membrane of Sulfolobus. Its redox midpoint potential at pH 6.5 was determined to be +100 (+/- 5) mV; spectral properties have also been determined. (f) The isolated aa3 preparation does not oxidize cytochrome c; however, it oxidizes N,N,N',N'-tetramethyl-1,4-phenylenediamine dihydrochloride as an artificial single-electron donor as well as reduced caldariella quinone, which is assumed to represent the natural substrate. The reaction is cyanide-sensitive and the product of oxygen reduction is water. (g) On the basis of the results obtained a novel type of cytochrome aa3 is postulated in this paper which oxidizes reduced quinones; its ability to act as a proton pump remains to be shown.

EPR signals and orientation of cytochromes in the spinach chloroplast thylakoid membrane

The cytochromes in spinach chloroplasts were studied using EPR spectroscopy. In addition to the low-spin heme signals previously assigned, cytochrome f ( g z 3.51), high-potential cytochrome b-559 ( g z 3.08) and cytochrome b-559 converted to a low-potential form ( g z 2.94), a high-spin heme signal was induced by 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ). However, this signal cannot be due to cytochrome b-563 in its native form. The orientation of the cytochromes in the thylakoid membrane was studied in magnetically oriented chloroplasts. Cytochrome b-559 in the native state and in the low-potential form was found to have its heme plane perpendicular to the membrane plane. The orientation was the same for cytochrome b-559 oxidized by low-temperature illumination, which suggests that also the reduced heme is oriented perpendicular to the membrane.

The effect of phospholipid depletion on the EPR behavior of cytochrome oxidase

Phospholipids are essential components for electron transport activity of cytochrome oxidase. Recently, we have found that the removal of phospholipids from the oxidase affected the copper and low-spin heme signals, and conceivably other paramagnetic centers as demonstrated by EPR spectroscopy. At 4.2–30 °K, the signal amplitudes and power saturation behaviors were studied at approximately g = 2.0 for the copper signal, and in the neighborhood of g = 3.0 for the low-spin heme signal. After depletion of phospholipids the amplitude of the copper signal decreased 25–30% at 12–30 °K and below 12 °K 40–50% under nonsaturating conditions. The amplitude of the low-spin heme signal decreased 60–70% at 4.2–20 °K. Below 14 °K both signals became more resistant to power saturation, but the copper signal was more readily saturated above this temperature, compared to the oxidase with about 25% lipid. After removal of phospholipids, the spectral features of the copper signal remained essentially the same, but the low-spin heme signal broadened and became very asymmetric to show two signals as revealed by the second harmonic EPR spectra. These findings may explain, at least partially, the wide variations in percentage of EPR detectable copper and heme of cytochrome oxidase reported by different laboratories. Unequivocally, the EPR behavior of cytochrome oxidase is not only affected by the protein moiety, but also by the associated phospholipids of the enzyme.

EPR of hydroxylamine oxidoreductase from Nitrosomonas europaea

EPR spectra are reported for the multiheme enzyme hydroxylamine oxidoreductase of Nitrosomonas europaea. Signals arising from several different types of low-spin ( S = 1 2 ) ferric heme were observed in the resting (oxidized) enzyme, but no evidence was obtained for high-spin ( S = 5 2 ) heme, copper or iron-sulfur centers. While overlap of the low-spin heme signals at X-band frequency complicates complete assignment of g values, four species with low field peaks at g 3.4, 3.1, 3.0 and 2.7 were clearly resolved. Complete reduction of the enzyme with sodium dithionite abolished all major signals. Partial reduction of the enzyme by hydroxylamine caused disappearance of signals at g 3.1, g 2.22 and g 1.35 indicating selective reduction of this low-spin component by the substrate.

The influence of pH on the EPR and redox properties of cytochrome c oxidase in detergent solution and in phospholipid vesicles

The EPR signals of oxidized and partially reduced cytochrome oxidase have been studied at pH 6.4, 7.4, and 8.4. Isolated cytochrome oxidase in both non-ionic detergent solution and in phospholipid vesicles has been used in reductive titrations with ferrocytochrome c. The g values of the low- and high-field parts of the low-spin heme signal in oxidized cytochrome oxidase are shown to be pH dependent. In reductive titrations, low-spin heme signals at g 2.6 as well as rhombic and nearly axial high-spin heme signals are found at pH 8.4, while the only heme signals appearing at pH 6.4 are two nearly axial g 6 signals. This pH dependence is shifted in the vesicles. The g 2.6 signals formed in titrations with ferrocytochrome c at pH 8.4 correspond maximally to 0.25–0.35 heme per functional unit ( aa 3) of cytochrome oxidase in detergent solution and to 0.22 heme in vesicle oxidase. The total amount of high-spin heme signals at g 6 found in partially reduced enzyme is 0.45–0.6 at pH 6.4 and 0.1–0.2 at pH 8.4. In titrations of cytochrome oxidase in detergent solution the g 1.45 and g 2 signals disappear with fewer equivalents of ferrocytochrome c added at pH 8.4 compared to pH 6.4. The results indicate that the environment of the hemes varies with the pH. One change is interpreted as cytochrome a 3 being converted from a high-spin to a low-spin form when the pH is increased. Possibly this transition is related to a change of a liganded H 2O to OH − with a concomitant decrease of the redox potential. Oxidase in phosphatidylcholine vesicles is found to behave as if it experiences a pH, one unit lower than that of the medium.

On the identity of the high spin heme components of cytochrome c oxidase

In oxidized, resting cytochrome c oxidase (EC 1.9.3.1) and under most conditions of partial reduction ⩽ 50% of the heme components are detected by EPR spectroscopy. When the enzyme is fully reduced in the presence of equimolar quantities of cytochrome c, anaerobic reoxidation by an excess of a chemical oxidant (ferricyanide, porphyrexide) produces intense high and low spin heme signals simultaneously. The time range in which maximal high spin signals are observed is 0.1–2 s after mixing. Under these conditions 35–50% of the total heme a is accounted for by the low spin heme signal and 35–40% by the high spin signals, with the rhombic component accounting for 30–35% of the total heme. It is concluded that under these conditions, the major portion of both heme components must be EPR detectable. Thus, if the generally accepted assignment of the low spin signal to cytochrome a is adopted, it follows that in the experiments described, cytochrome a 3 is represented in the rhombic high spin signal. The quantities of heme represented in the axial high spin signal are too small for a definitive assignment; these signals could originate from either heme. When after formation of high spin signals as described, O 2 is admitted, the rhombic signal is eliminated within 4 ms. In the presence of the strongest rhombic high spin signals, the absorption band at 655 nm is only ⩽ 25% developed. The implications of these findings are discussed in the context of present hypotheses concerning the state and interactions of cytochrome c oxidase components during oxidation-reduction.

EPR signals from cytochrome c oxidase

1. 1.|The major EPR signals from native and cytochrome c-reduced beef heart cytochrome c oxidase (EC 1.9.3.1) are characterized with respect to resonance parameters, number of components and total integrated intensity. A mistake in all earlier integrations and simulations of very anisotropic EPR signals is pointed out. 2. 2.|The so-called Cu 2+ signal is found to contain at least three components, one “inactive” form and two nearly similar active forms. One of the latter forms, corresponding to about 20% of the total EPR detectable Cu, has not been observed earlier and can only be resolved in 35 GHz spectra. It is not reduced by cytochrome c and is thought to reflect some kind of inhomogeneity in the enzyme preparation. The 35 GHz spectrum of the cytochrome c reducible component shows a rhombic splitting and can be well simulated with g-values 2.18, 2.03 and 1.99. The origin of such a unique type of Cu 2+ spectrum is discussed. 3. 3.|The low-spin heme signal in the oxidized enzyme ( g = 3.03, 2.21, 1.45) is found to correspond closely to one heme and shows no signs of interaction with other paramagnetic centres. 4. 4.|The high-spin heme signals appearing in partly reduced oxidase are found to consist of at least three species, one axial and two rhombic types. An integration procedure is described that allows the determination of the total integral intensity of high-spin heme EPR signals only by considering the g = 6 part of the signals. In a titration with ascorbate and cytochrome c the maximum intensity of the g = 6 species corresponds to 23% of the enzyme concentration.

Oxido-reductive titrations of cytochrome c oxidase followed by EPR spectroscopy

Experiments are described on oxido-reductive titrations of cytochrome c oxidase as followed by low-temperature EPR and reflectance spectroscopy. The reductants were cytochrome c or NADH and the oxidant ferricyanide. Experiments were conducted in the presence and absence of either cytochrome c or carbon monoxide, or both. An attempt is made to provide a complete quantitative balance of the changes observed in the major EPR signals. During reduction, the maximal quantity of heme represented in the high-spin ferric heme signals ( g ∼ 6; 2) is 25% of the total heme present, and during reoxidation 30%. With NADH reduction there is little difference between the pattern of disappearance of the low-spin ferric heme signals in the absence or presence of cytochrome c. The copper and high-spin heme signals, however, disappear at higher titrant concentrations in the presence of cytochrome c than in its absence. In these titrations, as well as in those with ferrocytochrome c, the quantitative balance indicates that, in addition to EPR-detectable components, EPR-undetectable components are also reduced, increasingly so at higher titrant concentrations. The quantity of EPR-undetectable components reduced appears to be inversely related to pH. A similar inverse relationship exists between pH and appearance of high-spin signals during the titration. At pH 9.3 the quantity of heme represented in the high-spin signals is < 5%, whereas it approximately doubles from pH 7.4 to pH 6.1. In the presence of CO less of the low-spin heme and copper signals disappears for the same quantity of titrant consumed, again implying reduction of EPR undetectable components. At least one of these components is represented in a broad absorption band centered at 655 nm. The stoichiometry observed on reoxidation, particularly in the presence of CO, is not compatible with the notion that the copper signal represents 100% of the active copper of the enzyme as a pair of interacting copper atoms.

Kinetic studies on cytochrome c oxidase by combined EPR and reflectance spectroscopy after rapid freezing

1. Techniques and experiments are described concerned with the millisecond kinetics of EPR-detectable changes brought about in cytochrome c oxidase by reduced cytochrome c and, after reduction with various agents, by reoxidation with O 2 or ferricyanide. Some experiments in the presence of ligands are also reported. Light absorption was monitored by low-temperature reflectance spectroscopy. 2. In the rapid phase of reduction of cytochrome c oxidase by cytochrome c (< 50 ms) approx. 0.5 electron equivalent per hame a is transferred mainly to the low-spin heme component of cytochrome c oxidase and partly to the EPR-detectable copper. In a slow phase (> 1 s) the copper is reoxidized and high-spin ferric heme signals appear with a predominant rhombic component. Simultaneously the absorption band at 655 nm decreases and the Soret band at 444 nm appears between the split Soret band (442 and 447 nm) of reduced cytochrome a. 3. On reoxidation of reduced enzyme by oxygen all EPR and optical features are restored within 6 ms. On reoxidation by O 2 in the presence of an excess of reduced cytochrome c, states can be observed where the low-spin heme and copper signals are largely absent but the absorption at 655 nm is maximal, indicating that the low-spin heme and copper components are at the substrate side and the component(s) represented in the 655 nm absorption at the O 2 side of the system. On reoxidation with ferricyanide the 655 nm absorption is not readily restored but a ferric high-spin heme, represented by a strong rhombic signal, accumulates. 4. On reoxidation of partly reduced enzyme by oxygen, the rhombic high-spin signals disappear within 6 ms, whereas the axial signals disappear more slowly, indicating that these species are not in rapid equilibrium. Similar observations are made when partly reduced enzyme is mixed with CO. 5. The results of this and the accompanying paper are discussed and on this basis an assignment of the major EPR signals and of the 655 nm absorption is proposed, which in essence is that published previously (Hartzell, C. R., Hansen, R. E. and Beinert, H. (1973) Proc. Natl. Acad. Sci. U.S. 70, 2477–2481). Both the low-spin ( g = 3; 2.2; 1.5) and slowly appearing high-spin ( g = 6; 2) signals are attributed to ferric cytochrome a, whereas the 655 nm absorption is thought to arise from ferric cytochrome a 3, when it is present in a state of interaction with EPR-undetectable copper. Alternative possibilities and possible inconsistencies with this proposal are discussed.

EPR studies on cytochrome components in phosphorylating particles ofAzotobacter vinelandii

Oxidized particles ofA. vinelandii show high-spin ferric signals with an axial and a rhombically distorted component with g-values at 5.94 and 6.24, 5.51, respectively. The signals behave similarly on variation of temperature and/or power and are, assigned to cytochromed. The addition of ligands such as cyanide and carbon monoxide to oxidized particles mainly affects the rhombic component of the signal in the g=6 region. Prolonged, incubation of cyanide with oxidized particles results in the appearance of two new low-spin ferric heme signals at g=2.99 and at g=3.23 which are tentatively assigned to low-spin forms of cyanide-liganded cytochromed. With computer signal-averaging of the EPR spectrum of oxidized particles, the presence of resonances in the g=3–4 region could be demonstrated. These resonances are assigned to cytochromeb1 (g-values at 3.68, 3.43),c-type cytochromes (g-values at 3.43, 3.25) and cytochromea1, and possibly a low-spin form of ac-type cytochrome (g-value at 3.03). These EPR results represent, to our knowledge, the only such studies reported on the membrane-boundb1 andc-type cytochromes of a bacterial respiratory-linked phosphorylating electron-transport chain.

Biochemical and biophysical studies on cytochrome c oxidase. XX. Reaction with sulphide

1. Upon addition of sulphide to oxidized cytochrome c oxidase, a low-spin heme sulphide compound is formed with an EPR signal at gx = 2.54, gy = 2.23 and gz = 1.87. Concomitantly with the formation of this signal the EPR-detectable low-spin heme signal at g = 3 and the copper signal near g = 2 decrease in intensity, pointing to a partial reduction of the enzyme by sulphide. 2. The addition of sulphide to cytochrome c oxidase, previously reduced in the presence of azide or cyanide, brings about a disappearance of the azido-cytochrome c oxidase signal at gx = 2.9, gy = 2.2, and gz = 1.67 and a decrease of the signal at g = 3.6 of cyano-cytochrome c oxidase. Concomitantly the sulphide-induced EPR signal is formed. 3. These observations demonstrate that azide, cyanide and sulphide are competitive for an oxidized binding site on cytochrome c oxidase. Moreover, it is shown that the affinity of cyanide and sulphide for this site is greater than that of azide.

Biochemical and biophysical studies on cytochrome c oxidase. XIX. An EPR study of the photodissociation of carboxycytochrome c oxidase in the presence of azide

1. The photodissociation reaction of the cytochrome c oxidase-CO compound in the presence of azide was studied by EPR at 15°K. Addition of CO in the dark to cytochrome c oxidase, partially reduced (2 electrons per 4 metal ions) in the presence of azide brings about a decrease in intensity of the azide-induced low-spin heme signal at g = 2.9, 2.2 and 1.67 and an increase in intensity of both the low-spin heme signal at g = 3 and the copper signal at g = 2. Subsequent illumination with white light at room temperature of this sample causes an enhancement of the azide-induced signal at g = 2.9, and a decrease in intensity of both signals at g = 3 and g = 2. It is shown that these changes in the EPR spectrum are reversible. 2. These results demonstrate that upon photodissociation, CO is replaced by azide wheras upon incubation in the dark CO expels azide from its binding site in cytochrome c oxidase. 3. Concomitantly with the binding of CO and dissociation of the azide molecule, and vice versa, electron redistributions occur as inferred from the changes in the intensity of the copper signal at g = 2. 4. The results are explained in a model of cytochrome c oxidase with either a common binding site (cytochrome a 3) ∗ ∗ For practical reasons we maintain the cytochrome a and cytochrome a and cytochrome a 3 terminology. Cytochrome a 3 then is that part of the protein in which the heme group is less readily reduced (cyanide and azide) or oxidized (CO and NO) in the presence of ligands. for CO and azide or in a model with anti-cooperative interaction between two different sites of binding. 5. Similar types of experiments with cyanide instead of azide show that cyanide is more firmly bound to partially reduced cytochrome c oxidase than CO and azide. The affinity of ligands for partially reduced enzyme decreases in the sequence: cyanide, CO (dark), azide and CO (illuminated).

Biochemical and biophysical studies on cytochrome c oxidase. XVII. An epr study of the photodissociation of cytochrome a32+ · CO

1. The photodissociation reaction of the cytochrome c oxidase-CO compound was studied by EPR at 15 °K. Illumination with white light at both room and liquid N 2 temperatures of the partially reduced cytochrome c oxidase (2 electrons per 4 metals) in the presence of CO, causes the appearance of a rhombic ( g x = 6.60, g y = 5.37) high-spin heme signal. This signal disappears completely upon darkening of the sample and reappears upon illumination at room temperature; accordingly the photolytic process is reversible. Under these conditions, no great changes in the intensities are observed, neither of the copper signal at g = 2, nor of the low-spin heme signal at g = 3, 2.2 and 1.5. 2. In the presence of ferricyanide (2 mM) and CO, both the low-spin heme signal ( g = 3.0, 2.2 and 1.5) and the copper signal of the partially reduced enzyme have intensities about equal to those of the completely oxidized enzyme in the absence of CO. Upon illumination of the carboxy-cytochrome c oxidase in the presence of ferricyanide, it was found that the rhombic high-spin heme signal appears without affecting appreciably the copper of low-spin heme signals. Thus, in the presence of ferricyanide the EPR-detectable paramagnetism of the illuminated carboxy-cytochrome c oxidase is higher than in the untreated oxidized enzyme. 3. The membrane-bound cytochrome c oxidase reduced with NADH in the presence of CO and subsequently oxidized with ferricyanide shows a similar rhombic high-spin heme signal ( g x = 6.62, g y = 5.29) upon illumination at room temperature. This signal disappears completely upon darkening and reappears upon illumination at room temperature.