Low-energy Electron Diffraction Research Articles

Thermal stability of gold films on titanium-adhered silicon substrate

In this study, thermally induced changes in the surface of a thin gold film deposited on Si(100) with a 5 nm thick titanium adhesion layer were investigated. The analysis involved X-ray photoelectron spectroscopy, low-energy electron diffraction, and scanning tunnelling microscopy. The sample was subjected to stepwise annealing under ultra-high vacuum conditions at temperatures ranging from 430 to 1330 K. Low-temperature annealing up to 450 K did not alter the morphology but improved the cleanliness of the gold film surface. Annealing between 530 and 930 K resulted in the disintegration of the gold film, along with mixing and interaction between the sample components. Annealing the sample at 980 K led to the emergence of a gold silicide surface on Si(100) exhibiting the (5 × 3.2)R5.7° reconstruction.

Synthesis of fullerite (100) through epitaxy on a complex intermetallic surface

We report the first epitaxial growth of bulk-like C60(100) plane stabilized by a size-matching effect on the surface of a complex intermetallic compound. As characterized by low energy electron diffraction (LEED) and scanning tunneling microscopy (STM) techniques, the adsorption of C60 on Au–Si–Ho(100) surface is disordered at room temperature but ordered when the substrate is held at elevated temperature (669 K). In the submonolayer regime, different superstructures are observed depending on the fullerenes coverage. Upon completion of the first monolayer of C60, the thin film of c(1 × 1) superstructure is structurally equivalent to a (100) surface plane of the face-centered cubic structure of C60 bulk crystal. This structure is unusual for C60 monolayers on metal surfaces and appears to be favored by an almost perfect match between the most preferred C60 intermolecular distance and the distances separating specific adsorption sites of the large unit cell compound. The adsorption site selection is dictated by a local symmetry matching between the pentagonal fullerene facets and pseudo-five-fold symmetric atomic arrangements on the substrate. After the completion of the first monolayer, further deposition of C60 at 387 K results in the growth of a (100) oriented thicker epitaxial fullerite crystal.

In Situ Studies on the Influence of Surface Symmetry on the Growth of MoSe2 Monolayer on Sapphire Using Reflectance Anisotropy Spectroscopy and Differential Reflectance Spectroscopy

The surface symmetry of the substrate plays an important role in the epitaxial high-quality growth of 2D materials; however, in-depth and in situ studies on these materials during growth are still limited due to the lack of effective in situ monitoring approaches. In this work, taking the growth of MoSe2 as an example, the distinct growth processes on Al2O3 (112¯0) and Al2O3 (0001) are revealed by parallel monitoring using in situ reflectance anisotropy spectroscopy (RAS) and differential reflectance spectroscopy (DRS), respectively, highlighting the dominant role of the surface symmetry. In our previous study, we found that the RAS signal of MoSe2 grown on Al2O3 (112¯0) initially increased and decreased ultimately to the magnitude of bare Al2O3 (112¯0) when the first layer of MoSe2 was fully merged, which is herein verified by the complementary DRS measurement that is directly related to the film coverage. Consequently, the changing rate of reflectance anisotropy (RA) intensity at 2.5 eV is well matched with the dynamic changes in differential reflectance (DR) intensity. Moreover, the surface-dominated uniform orientation of MoSe2 islands at various stages determined by RAS was further investigated by low-energy electron diffraction (LEED) and atomic force microscopy (AFM). By contrast, the RAS signal of MoSe2 grown on Al2O3 (0001) remains at zero during the whole growth, implying that the discontinuous MoSe2 islands have no preferential orientations. This work demonstrates that the combination of in situ RAS and DRS can provide valuable insights into the growth of unidirectional aligned islands and help optimize the fabrication process for single-crystal transition metal dichalcogenide (TMDC) monolayers.

Spin asymmetry of O 2p –related states in SrTiO3(001)

Atomically clean SrTiO3(001) is characterized by low energy electron diffraction, core level and valence band photoelectron spectroscopy, the latter also with spin resolution. Samples prepared by a sputtering-annealing procedure exhibited in-gap states in the valence band spectra, Ti3+ components in Ti 2p core level spectra and a noticeable spin asymmetry in the 3–9 eV binding energy range, which corresponds to valence states of mainly O 2p character. Upon annealing in oxygen, the spin asymmetry vanishes, accompanied by the intensity decrease of the contribution of titanium low ionization states and of in-gap states, indicating that these three phenomena are mutually connected. The observed spin asymmetry may be generated by indirect exchange mediated by the in-gap states between O 2p orbitals, or by the partial Ti 3d character of these states, which acquire non-zero spin in case of incomplete oxygen coordination.

Dry cleaning of InSb surfaces by hydrogen molecule exposure in ultrahigh vacuum

Cleaning semiconductor surfaces by atomic hydrogen or hydrogen plasma has gained significant interest because such a dry-cleaning method enables to reduce consumption of chemicals and pure water, and to treat challenging surfaces of three-dimensional semiconductor nanostructures. We have studied effects of mere H2 molecule exposures on (111)B and (110) surfaces of InSb with native oxides in an ultrahigh-vacuum (UHV) chamber. Without any hydrogen cracking, exposure of native-oxide covered InSb(111)B, heated simultaneously at 350 °C, to H2 with a partial pressure of 5∙10−5 mbar decreases amount of surface oxides and carbon, according to x-ray photoelectron spectroscopy, and provides (2×2) low-energy electron diffraction (LEED) pattern. Scanning tunneling microscopy indicates that this InSb(111)B(2×2) surface contains still extra Sb. When the InSb temperature increases to 400 °C during the H2 exposure, LEED changes to (3×3) pattern, which is known to arise from a less Sb-rich surface compared to InSb(111)B(2×2). When InSb(111)B(3×3) is exposed to H2 at the lowered temperature of 300 °C, LEED changes back to (2×2), which is discussed to arise from that InSb(111)B(3×3) contains still oxygen. Experiments for InSb(110) support that the found H2 exposure effects apply to different crystal faces of InSb.

Ultra‐Thin Metal Oxide Superstructure of Pd(001) as Passivation Interlayer at Organic/Metal Interface

AbstractAt organic molecule/metal interfaces for electronic applications, it is required of the metal surface to be passivated in view of preserving the molecular properties of the ordered organic layer. This can be achieved by screening the metal with a single atomic layer of O, namely, ultra‐thin metal oxide (UTMO) layers. Cobalt tetraphenylporphyrins (CoTPP) on oxygen passivated Fe(001), with 1 ML O coverage, have revealed a molecule/substrate decoupling effect due to the formation of an ultra‐thin Fe oxide layer at the interface. However, the threshold concentration of surface O required to observe the decoupling effect has not been assessed yet. In this work, the possibility of stabilizing different ultra‐thin Pd oxide superstructures, characterized by a different number of O atoms per unit cell, is exploited to investigate the O decoupling effect on CoTPP films. Two Pd oxide superstructures are considered: Pd(001)‐p(2 × 2)O and Pd(001)‐p(√5 × √5)R27°O, with 0.25 and 0.80 ML O coverages, respectively, which are characterized by low‐energy electron diffraction (LEED), X‐ray and ultra‐violet photoelectron spectroscopies (XPS/UPS) and inverse photoemission spectroscopy (IPES). The results suggest a lower limit of 0.80 ML O coverage as a passivation interlayer to obtain an ordered and decoupled CoTPP monolayer on Pd(001).

Zinc blende ZnS (001) surface structure investigated by XPS, LEED, and DFT

The formation and stability of the zinc blende ZnS (001) single crystal surface have been examined by x-ray photoemission spectroscopy (XPS), low-energy electron diffraction (LEED), and density-functional theory (DFT) calculations. LEED patterns obtained from the ZnS (001) surface prepared in ultrahigh vacuum conditions at 1420 K reveal the formation of a (1 × 2) reconstructed structure. Surface chemical characterization performed by XPS indicates that the surface region consists of a Zn-deficient (sulfur-rich) phase. Our DFT theoretical calculations confirm that the ZnS (001) (1x2) surface structure is energetically favorable and consists of a Zn-terminated topmost surface layer stabilized by Zn-vacancies. The calculations also suggest that the remaining Zn-cations on the surface are displaced inward, driven by surface energy minimization related to zinc-blend ZnS (001) polar nature. Notably, the observed surface structural modifications have potential implications for the ZnS physical and chemical properties.

LEED-IV analyses of tellurium adsorbate structures on iridium and gold surfaces

The determination of the configuration of atomic adsorbates on clean metal surfaces has been a key issue in surface science 60 years ago and still is today. We demonstrate that despite the prevalence of combined scanning tunneling microscopy and density functional theory studies of adsorbate systems the pitfalls are plentiful calling for accurate, reliable structure analyses that can be delivered by diffraction methods. We analyze and compare the ordered phases of Te on Ir(111), Ir(100), and Au(100) demonstrating the accuracy, the in-depth information and physical insight that can nowadays be obtained by quantitative low-energy electron diffraction structural analyses.

Electronic and Structural Properties of Thin Iron Oxide Films on CeO2.

Modification of CeO2 (ceria) with 3d transition metals, particularly iron, has been proven to significantly enhance its catalytic efficiency in oxidation or combustion reactions. Although this phenomenon is widely reported, the nature of the iron-ceria interaction responsible for this improvement remains debated. To address this issue, we prepared well-defined model FeOx/CeO2(111) catalytic systems and studied their structure and interfacial electronic properties using photoelectron spectroscopy, scanning tunneling microscopy, and low-energy electron diffraction, coupled with density functional theory (DFT) calculations. Our results show that under ultrahigh vacuum conditions, Fe deposition leads to the formation of small FeOx clusters on the ceria surface. Subsequent annealing results in the growth of large amorphous FeOx particles and a 2D FeOx layer. Annealing in an oxygen-rich atmosphere further oxidizes iron up to the Fe3+ state and improves the crystallinity of both the 2D layer and the 3D particles. Our DFT calculations indicate that the 2D FeOx layer interacts strongly with the ceria surface, exhibiting structural corrugations and transferred electrons between Fe2+/Fe3+ and Ce4+/Ce3+ redox pairs. The novel 2D FeOx/CeO2(111) phase may explain the enhancement of the catalytic properties of CeO2 by iron. Moreover, the corrugated 2D FeOx layer can serve as a template for the ordered nucleation of other catalytically active metals, in which the redox properties of the 2D FeOx/CeO2(111) system are exploited to modulate the charge of the supported metals.

On-Surface Chemistry: Probing the Presence of Adatoms on Differently Terminated Surfaces by Porphyrin Metalation

Reactive adsorbates in on-surface reactions and in heterogeneous catalysis on different substrates are of emerging importance. This is for the crucial roles they take in reaction pathways and for their decisive influence on reaction kinetics. [1] The thermally activated 2D mobility [2] of reaction precursors and reactive adatoms as well as their spatial and temporal coincidence at reaction sites is of mechanistic importance for many interface-specific reactions. In our work, we use the well-studied metalation reaction of H2-porphyrins to investigate the action of adatoms on metallic and passivated surface substrates. Porphyrin metalation has been established on atomically clean metallic substrates [3] as well as on metal-oxides [4] and metallic surfaces modified by oxygen [5].We perform spectro-microscopy correlation experiments combining X-ray Photoelectron Spectroscopy, Ultraviolet Photoelectron Spectroscopy, Low Energy Electron Diffraction and Scanning Tunnelling Microscopy on Cl- and N terminated Cu(001). Thereby we find extended layers of adsorbate-induced superstructures that have decisive and contrasting impact on the reactivity of the surface, as well as on molecular self-assembly. The O and N termination of Cu facilitates the metalation reaction and self-assembled domains of CuTPP are formed at room temperature. Cl termination on the contrary, fully inhibits the metalation reaction and causes 2HTPP to assemble into small ‘magic’ clusters.

Surface structure of MOVPE-prepared As-modified Si(100) substrates

In the pursuit of high-efficiency tandem devices for solar energy conversion based on III-V-semiconductors, low-defect III-V nucleation on Si(100) substrates is essential. Here, hydrogen and arsenic are key ingredients in all growth processes with respect to industrially scalable metalorganic vapor phase epitaxy. Our study provides insight into Si(100) surface preparation for the initial stage of III-V nucleation. The samples investigated, prepared on substrates with different offcut angles, show single domain surfaces consisting of rows of preferentially buckled dimers. Low energy electron diffraction and reflection anisotropy spectroscopy confirm well-defined (1 × 2)/(2 × 1) majority domains. Fourier-transform infrared spectroscopy revealed hydrogen bonding to the surface dimers, while no impurities were found by XPS. Density functional theory calculations support the experimental results and reveal a novel surface motif of H-passivated Si-As mixed dimers.

Influencing the surface quality of free-standing wurtzite gallium nitride in ultra-high vacuum: Stoichiometry control by ammonia and bromine adsorption

Gallium nitride (GaN), a wide bandgap semiconductor with absorption and emission in the ultraviolet/visible range, is proposed as an alternative to metallic surfaces for assembling organic molecular structures aiming at optoelectronic applications. However, the formation of a persistent surface oxide layer in air considerably limits the use of GaN for well-defined interfaces. In this work, we have investigated, characterized and processed n-type free-standing c-plane hexagonal wurtzite GaN crystals grown by hydride vapor phase epitaxy and ammonothermal growth methods. Surface cleaning and full removal of the oxide layer on GaN surfaces could be reproducibly achieved via sputtering and annealing cycles, as evidenced by X-ray photoelectron spectroscopy and low-energy electron diffraction. Scanning tunneling microscopy, however, indicated substantial roughening of the GaN surface and the formation of unwanted Ga-rich islands and clusters. Although ammonia (NH3) and bromine (Br) treatments compensated the N/Ga atoms ratio reduced by sputtering, the surface morphology remained rough, exhibiting randomly shaped and distributed hillocks. In addition, we studied the effect of electron bombardment on the surface quality of GaN during NH3 annealing, on-surface debromination and polymerization of 1,3,5-tris(4-bromophenyl) benzene on GaN, and the removal of Ga atoms by Br atoms during the desorption.

Hydroxyl on Stepped Copper and its Interaction with Water.

We describe the hydroxyl and mixed hydroxyl-water structures formed on a stepped copper surface following the reaction of adsorbed O with water at a low temperature and compare them to the structures found previously on plane copper surfaces. Thermal desorption profiles, STM, and low-energy electron diffraction show that water reacts with O at temperatures below 130 K on Cu(511). Two well-defined phases appear as the OH/H2O layer is heated to desorb excess water, a 1OH:1H2O phase and a pure OH phase. The 1OH:1H2O structure consists of 1D chains binding across two adjacent copper steps, with a double period along the step. Electronic structure calculations show that the structure has a zigzag chain of water along the terrace, stabilized by hydrogen bonds to OH groups adsorbed in the step bridge sites. This structure binds OH in its favored site and is similar to the structure observed on other open faces of Cu and Ni, suggesting that this structural arrangement may be common on other surfaces that have steps or rows of close packed metal atoms. The hydroxyl/water chains decompose at 210 K to leave OH adsorbed in the Cu step bridge site, with some forming H-bonded trimers that bridge between two Cu steps. Heating the surface causes hydroxyl to disproportionate near 300 K, desorbing water to leave chemisorbed O.

Quasi-1D Moiré superlattices in self-twisted two-allotropic antimonene heterostructures.

Two-dimensional heterostructures, characterized by a twist angle between individual sublayers, offer unique and tunable properties distinct from standalone layers. These structures typically introduce a realm of exotic quantum phenomena due to the appearance of new, long range periodicities associated with Moiré superlattices. Using molecular beam epitaxy, we demonstrate the growth of bi-allotropic 2D-Sb heterostructures on a W(110) substrate composed of twisted α (α-Sb) and β (β-Sb) phases of antimonene. Due to the relatively weak interaction between sublayers, the twist angle is intrinsically determined for each heterostructure, revealing its inherent self-twisted nature. The different atomic lattice symmetries of both allotropes lead to the formation of distinctive quasi-1D Moiré superlattices, while the random nature of the twist angle allows for a wide modulation of the Moiré potential landscape. The observed Moiré patterns on β-Sb/α-Sb heterostructures were compared with a simple model, revealing satisfactory agreement with the experiments and strongly validating the formation of self-twisted β-Sb/α-Sb heterostructures. The samples were characterized in situ using low energy electron microscopy and diffraction techniques providing a real-time tracking of the growth process and insight into the atomic structure of the synthesized nanostructures.

Intrinsically Patterned Two-Dimensional Transition Metal Halides.

Patterning and defect engineering are key methods for tuning the properties and enabling distinctive functionalities in two-dimensional (2D) materials. However, generating 2D periodic patterns of point defects in 2D materials, such as vacancy lattices that can serve as antidot lattices, has been elusive until now. Herein, we report on 2D transition metal dihalides epitaxially grown on metal surfaces featuring periodically assembled halogen vacancies that result in alternating coordination of the transition metal atom. Using low-temperature scanning probe microscopy and low-energy electron diffraction, we identified the structural properties of intrinsically patterned FeBr2 and CoBr2 monolayers grown epitaxially on Au(111). Density functional theory reveals that Br vacancies are facilitated by low formation energies, and the formation of a vacancy lattice results in a substantial decrease in the lattice mismatch with the underlying Au(111). We demonstrate that interfacial strain engineering presents a versatile strategy for controlled patterning in two dimensions with atomic precision over several hundred nanometers to solve a long-standing challenge of growing atomically precise antidot lattices. In particular, patterning of 2D materials containing transition metals provides a versatile method to achieve unconventional spin textures with noncollinear spin.

Structure Determination of F4TCNQ on Ag(111): A Systematic Trend in Metal Adatom Incorporation.

A structure determination of the commensurate phase formed by 7,7,8,8-tetracyano-2,3,5,6-tetrafluoroquinodimethane (F4TCNQ) absorbed on Ag(111) is reported. Initial characterization was performed using low-energy electron diffraction and synchrotron radiation photoelectron spectroscopy, with quantitative structural data being provided by normal incident X-ray standing waves (NIXSW) and surface X-ray diffraction (SXRD). NIXSW data show the F4TCNQ molecule to adopt a "twisted" conformation on the surface, previously found to be associated with metal adatom incorporation into a 2d-metal-organic framework for F4TCNQ on Au(111), Ag(100), and Cu(111). SXRD results provide direct evidence of the presence of Ag adatoms that are found to occupy near-bridge or fcc hollow sites with respect to the underlying surface, at an adsorption height of 2.69 ± 0.10 Å. The results show a consistent pattern of behavior for F4TCNQ adsorption on the (111) surfaces of Cu, Ag, and Au.

In situ Low-Energy Electron Microscopy of Chemical Waves on a Composite V-oxide/Rh(110) Surface.

Chemical wave patterns and V-oxide redistribution in catalytic methanol oxidation on a VOx/Rh(110) surface have been investigated in the 10-4 mbar range with low-energy electron microscopy (LEEM) and micro spot low-energy electron diffraction (micro-LEED) as in situ methods. V coverages of θV=0.2 and 0.4 MLE (monolayer equivalents) were studied. Pulses display a c(2×2) pattern in the reduced part and (1×2) and c(2×8) structures in the oxidized part of the surface. At θV=0.4 MLE (1×2)/(1×4) patterns with streaks along the [001]-direction at the 1/8 positions are present on the oxidized part of the surface. This phase can be assigned to V-oxide. On a tentative basis, an excitation mechanism for pulses is presented, Annealing the surface to 990 K under reaction conditions results in a macroscopic hole pattern in which holes of low VOx coverage are surrounded by a V-oxide layer. Chemical waves propagate inside the holes as well as on the VOx covered parts of the surface. The results demonstrate for the first time that also in supported oxidic overlayers selforganization processes can take place leading to chemical waves and a large scale redistribution of the oxide.

Solution of the structure of the high-coverage CO layer on the Ru(0001) surface—A combined study by density functional theory and scanning tunneling microscopy

Structures formed by dense CO adsorption layers can provide information about the balance between molecule–surface and molecule–molecule interactions. However, in many cases, the structure models are not clear. Using density functional theory (DFT) and scanning tunneling microscopy (STM), we have investigated the high-coverage CO layer on the Ru(0001) surface. Previous investigations by low-energy electron diffraction (LEED) and vibrational spectroscopy led to conflicting results about the structure. In the present study, 88 models with coverages between 0.58 and 0.77 monolayers have been analyzed by DFT. The most stable structures consist of small, compact CO clusters with an internal pseudo 1×1 structure. The CO molecules in the cluster centers occupy on-top sites in an upright position, whereas the molecules farther outside are slightly shifted from these sites and tilted outward. STM data of the CO-saturated surface at low temperatures, corresponding to a coverage of 0.66 monolayers, show a quasi-hexagonal pattern of features with an internal hexagonal fine structure. Simulated images based on the cluster model agree with the experimental data. It is concluded that the high-coverage CO layer consists of the close-packed clusters predicted by DFT as the most stable structure elements. In the experiment, the sizes and shapes of the clusters vary. However, the arrangement is not random but follows defined tiling rules. The structure remains ordered, almost up to room temperature. The LEED data are re-interpreted on the basis of the Fourier transforms of the STM data, solving the long-standing conflict about the structure.

L -gap surface resonance at Pt(111): Influence of atomic structure, d bands, and spin-orbit interaction

Pt(111) hosts a surface resonance with peculiar properties concerning energy vs momentum dispersion and spin texture. At variance with the free-electron-like behavior of the L-gap Shockley-type surface states on the fcc(111) surfaces of Au, Ag, and Cu, it splits into several branches with distinct spin polarization around the center of the surface Brillouin zone Γ¯. Theoretical predictions based on density-functional theory vary depending on the particular functionals used. To clarify this issue, we investigate the atomic structure of Pt(111) by low-energy electron diffraction and the unoccupied electronic structure by spin- and angle-resolved inverse photoemission. The experimental results are backed by theoretical studies using different functionals, which show that the characteristics of the surface band depend critically on the lattice constant. From the analysis of the energy-dependent low-energy electron diffraction intensities, we derive structural parameters of the Pt(111) surface relaxation with high accuracy. In addition, we give an unambiguous definition of the nonequivalent mirror-plane directions Γ¯M¯ and Γ¯M¯′ at fcc(111) surfaces, which is consistent with band-structure calculations and inverse-photoemission data. Concerning the surface resonance at the bottom of the L gap, we identified a delicate interplay of several contributions. Lattice constant, hybridization with d bands, and the influence of spin-orbit interaction are critical ingredients for understanding the peculiar energy dispersion and spin character of the unoccupied surface resonance. Published by the American Physical Society 2024

A continuous-wave and pulsed X-band electron spin resonance spectrometer operating in ultra-high vacuum for the study of low dimensional spin ensembles.

We report the development of a continuous-wave and pulsed X-band electron spin resonance (ESR) spectrometer for the study of spins on ordered surfaces down to cryogenic temperatures. The spectrometer operates in ultra-high vacuum and utilizes a half-wavelength microstrip line resonator realized using epitaxially grown copper films on single crystal Al2O3 substrates. The one-dimensional microstrip line resonator exhibits a quality factor of more than 200 at room temperature, close to the upper limit determined by radiation losses. The surface characterizations of the copper strip of the resonator by atomic force microscopy, low-energy electron diffraction, and scanning tunneling microscopy show that the surface is atomically clean, flat, and single crystalline. Measuring the ESR spectrum at 15K from a few nm thick molecular film of YPc2, we find a continuous-wave ESR sensitivity of 2.6 × 1011spins/G · Hz1/2, indicating that a signal-to-noise ratio of 3.9G · Hz1/2 is expected from a monolayer of YPc2 molecules. Advanced pulsed ESR experimental capabilities, including dynamical decoupling and electron-nuclear double resonance, are demonstrated using free radicals diluted in a glassy matrix.