Lipase-catalyzed Reaction Research Articles

Immobilization of Lipase from Thermomyces Lanuginosus and Its Glycerolysis Ability in Diacylglycerol Preparation.

In the glycerolysis process for diacylglycerol (DAG) preparation, free lipases suffer from poor stability and the inability to be reused. To address this, a cost-effective immobilized lipase preparation was developed by cross-linking macroporous resin with poly (ethylene glycol) diglycidyl ether (PEGDGE) followed by lipase adsorption. The selected immobilization conditions were identified as pH 7.0, 35 °C, cross-linking agent concentration 2.0%, cross-linking time 4 h, lipase amount 5 mg/g of support, and adsorption time 4 h. Enzymatic properties of the immobilized lipase were analyzed, revealing enhanced pH stability, thermal stability, storage stability, and operational stability post-immobilization. The conditions for immobilized enzyme-catalyzed glycerolysis to produce DAG were selected, demonstrating the broad applicability of the immobilized lipase. The immobilized lipase catalyzed glycerolysis reactions using various oils as substrates, with DAG content in the products ranging between 35 and 45%, demonstrating broad applicability. Additionally, the changes during the repeated use of the immobilized lipase were characterized, showing that mechanical damage, lipase leakage, and alterations in the secondary structure of the lipase protein contributed to the decline in catalytic activity over time. These findings provide valuable insights for the industrial application of lipase.

Concentration of docosahexaenoic acid from tuna oil via a two lipase-catalyzed reaction

Docosahexaenoic acid (DHA) was concentrated successfully in the glyceride fractions from tuna oil via a two-step enzyme reaction involving hydrolysis and ethanolysis. In the first step, Candida rugosa lipase-catalyzed hydrolysis was carried out to concentrate DHA in the glyceride fractions. The DHA content in the glyceride fraction after hydrolysis increased from 30% in the initial tuna oil to 46%. In the second step, Lipozyme RM IM-catalyzed ethanolysis was conducted with the reaction mixture from the first step to further concentrate DHA in the glyceride fraction. In this step, the reaction mixture obtained from the first step was employed directly in Lipozyme RM IM-catalyzed ethanolysis without additional steps needed to remove free fatty acid. Finally, DHA was concentrated from an initial content of 30% in the tuna oil to 68.4% in the glyceride fractions via a novel two-step enzyme reaction strategy.

Solvent Tolerance Improvement of Lipases Enhanced Their Applications: State of the Art.

Lipases, crucial catalysts in biochemical synthesis, find extensive applications across industries such as food, medicine, and cosmetics. The efficiency of lipase-catalyzed reactions is significantly influenced by the choice of solvents. Polar organic solvents often result in a decrease, or even loss, of lipase activity. Conversely, nonpolar organic solvents induce excessive rigidity in lipases, thereby affecting their activity. While the advent of new solvents like ionic liquids and deep eutectic solvents has somewhat improved the activity and stability of lipases, it fails to address the fundamental issue of lipases' poor solvent tolerance. Hence, the rational design of lipases for enhanced solvent tolerance can significantly boost their industrial performance. This review provides a comprehensive summary of the structural characteristics and properties of lipases in various solvent systems and emphasizes various strategies of protein engineering for non-aqueous media to improve lipases' solvent tolerance. This study provides a theoretical foundation for further enhancing the solvent tolerance and industrial properties of lipases.

Immobilization of Candida rugosa lipase on optimized polyamidoamine dendrimer functionalized magnetic multiwalled carbon nanotubes for green manufacture of butyl butyrate ester

Mineral acid catalysis in Fisher-Speier esterification is hazardous and have other disadvantages. The objective of the study was immobilization of Candida rugosa lipase onto iron oxide (Fe3O4) impregnated magnetic mutiwalled carbon naotubes (MMWCNTs) using amine functionalized polyamidoamine (PAMAM) dendrimers for manufacture of butyl butyrate ester. Dendrimers were synthesized from reaction of ethyl methacrylate with varying chain length of diamines 1, 4 diaminobutane (DAB) / 1, 3 diaminopropane (DAP) / ethylene diamine (ED). The effect of aliphatic alkyl chain length (CH2) of functionalizing agents ED, DAP and DAB, and dendrimer generations on amount of terminal NH2 group, surface charge, protein loading and immobilized enzyme activities were analysed. Magnetic MWCNTs support surface modified with third generation PAMAM using ethylene diamine showed highest protein load 220.1 mg g−1 and enzymatic activity 8,276.21 U g−1 support. The immobilized enzyme particles were characterized by HRTEM, FTIR, XRD, TGA, VSM and Zeta potential analysis. The immobilized enzyme showed improvement in the dispersion, activity, stability and reusability characteristics. Maximum esterification yield 92.67 % and reuse upto 11 cycles with 65.2 % yield obtained. The immobilized preparation showed 2.3 folds esterification than free enzyme. Developed nanobiocatalyst expects to possess potential for various other applications of lipase catalysed reactions.

Mobilization of lipase and metal in microgel for biodiesel production and ring-opening polymerization

Lipase catalyzed reactions have wide applications in biological and industrial production. However, achieving rapid and stable catalysis from a single free lipase under different conditions remains a challenging goal. Here, we construct a polymer microgel immobilized lipase catalytic system (PPL), which is synthesized through radical polymerization. Then, metals could coordinate with multiple sites and graft from the surface of microgel. The lipase activity results showed that zinc and lipase microgel display the best catalysis efficiency and the zinc/lipase microgel co-catalysis system showed rapid and stable catalysis at different temperatures and pH. The fast and stable catalysis under different conditions contributes to the interface structure of enzyme/metal microgel. Moreover, the zinc/lipase microgel could complete biodiesel production and ring-opening polymerization. Therefore, this interface system of lipase-metal microgel provides a new platform for rapid and stable ester catalysis under different conditions.

Improvement of the enantioselectivity of lipase catalyzed reactions with deoxycholic acid‐based molecular tweezers

AbstractBACKGROUNDLipase as a hydrolase has important applications in the synthesis of chiral drugs. Based on the special interfacial activity of lipase, bile salt as a biosurfactant can effectively improve the catalytic activity of lipase.RESULTSIn this work, the strong selective recognition of the molecular tweezers and guest molecules helps improve the guest molecule concentration near the lipase catalytic center. However, this strong recognition will also make it difficult for the guest molecules to break away from the molecular tweezers. Therefore, there is an optimal value for this recognition that can effectively improve the chiral resolution effect of lipase.CONCLUSIONSThe two hydroxyl groups on deoxycholic acid were modified to prepare deoxycholic acid‐based molecular tweezers with two ‘arms’ and one ‘crack.’ The recognition performance between the molecular tweezers and amino acid methyl ester was determined by UV spectrophotometry. According to the binding constant, Ka, and free energy, −ΔG0, a complex formed between the deoxycholic acid‐based molecular tweezers (host) and amino acid methyl ester (guest) due to chiral recognition. Molecular tweezers were subsequently mixed with porcine pancreatic lipase (PPL) and candida rugosa lipase (CRL), respectively, to catalyze the transesterification of racemic tryptophan methyl ester. © 2023 Society of Chemical Industry.

Physico-chemical characterization of methanolic mixtures of cholinium dihydrogen phosphate-based DES

The biocompatibility of three deep eutectic solvents based on cholinium dihydrogen phosphate for their use in lipase-catalyzed reactions was recently demonstrated, so the possible application as cosolvents with methanol in transesterification processes demands an exhaustive characterization of the physical properties. Thus, in this work binary and ternary deep eutectic solvents composed of the abovementioned salt as hydrogen bond acceptor and ethyleneglycol and/or glycerol as hydrogen bond donors were synthesized and mixed with methanol. The density, refractive index, electrical conductivity and dynamic viscosity were determined between 293.15 K and 323.15 K. The experimental data were correlated with different well-known equations and derived magnitudes like excess molar volumes, changes of refractive index on mixing and viscosity deviations were inferred in order to get an in-depth characterization of the studied mixtures with cholinium dihydrogen phosphate-based DES. The most intriguing data observed is the great peak measured for ionic conductivity at very high methanol concentration, which is difficult to explain even with the most recent theoretical models.

Enzymatic Reactions using Ionic Liquids for Green Sustainable Chemical Process; Stabilization and Activation of Lipases.

The enzymatic reaction is highly respected from an environmentally-friendly point-of-view. Optimization of the reaction media and supporting materials of enzymes must be investigated in parallel with the effort to develop new enzymes. Lipases are frequently used for organic syntheses as synthetic tools even industry because of their acceptance of having a broad range of substrates, stability, and availability. We have investigated the possibility of ILs as both a solvent and activating or stabilization agent of enzymes, in particular, lipase as a model enzyme. ILs allowed recyclable use of a lipase and significant acceleration of transesterification, and also enhanced the stability and reaction activity of a lipase by immobilization through a lyophilization process. We discuss how we enhanced the enzyme capability using the IL engineering focusing on lipase-catalyzed reactions, i. e., realization of the recyclable use of an enzyme, how ILs mediated the enhanced reaction rate, and improved the stability of the enzyme.

Palm Raceme as a Promising Biomass Precursor for Activated Carbon to Promote Lipase Activity with the Aid of Eutectic Solvents

This study concerns the role of activated carbon (AC) from palm raceme as a support material for the enhancement of lipase-catalyzed reactions in an aqueous solution, with deep eutectic solvent (DES) as a co-solvent. The effects of carbonization temperature, impregnation ratio, and carbonization time on lipase activity were studied. The activities of Amano lipase from Burkholderia cepacia (AML) and lipase from the porcine pancreas (PPL) were used to investigate the optimum conditions for AC preparation. The results showed that AC has more interaction with PPL and effectively provides greater enzymatic activity compared with AML. The optimum treatment conditions of AC samples that yield the highest enzymatic activity were 0.5 (NaOH (g)/palm raceme (g)), 150 min, and a carbonization temperature of 400 °C. DES was prepared from alanine/sodium hydroxide and used with AC for the further enhancement of enzymatic activity. Kinetic studies demonstrated that the activity of PPL was enhanced with the immobilization of AC in a DES medium.

Development of 3D Printed Enzymatic Microreactors for Lipase-Catalyzed Reactions in Deep Eutectic Solvent-Based Media.

In this study, 3D printing technology was exploited for the development of immobilized enzyme microreactors that could be used for biocatalytic processes in Deep Eutectic Solvent (DES)-based media. 3D-printed polylactic acid (PLA) microwell plates or tubular microfluidic reactors were modified with polyethylenimine (PEI) and lipase from Candida antarctica (CALB) was covalently immobilized in the interior of each structure. DESs were found to have a negligible effect on the activity and stability of CALB, and the system proved highly stable and reusable in the presence of DESs for the hydrolysis of p-nitrophenyl butyrate (p-NPB). A kinetic study under flow conditions revealed an enhancement of substrate accessibility in the presence of Betaine: Glycerol (Bet:Gly) DES, while the system was not severely affected by diffusion limitations. Incubation of microreactors in 100% Bet:Gly preserved the enzyme activity by 53% for 30 days of storage at 60 °C, while the buffer-stored sample had already been deactivated. The microfluidic enzyme reactor was efficiently used for the trans-esterification of ethyl ferulate (EF) with glycerol towards the production of glyceryl ferulate (GF), known for its antioxidant potential. The biocatalytic process under continuous flow conditions exhibited 23 times higher productivity than the batch reaction system. This study featured an effective and robust biocatalytic system with immobilized lipase that can be used both in hydrolytic and synthetic applications, while further optimization is expected to upgrade the microreactor system performance.

Pickering Emulsions Stabilized by Lignin/Chitosan Nanoparticles for Biphasic Enzyme Catalysis.

In this study, we construct a green and high-performance platform using Pickering emulsions for biphasic catalysis. The oil-in-water Pickering emulsions stabilized by the lignin/chitosan nanoparticles (Lig/Chi NPs) have great stability and alkali resistance, showing pH-responsive reversible emulsification and demulsification which can be recycled at least three times. The Pickering emulsion also has fluorescence and wide availability to different oil-to-water volume ratios, types of oil, storage times, temperatures, and ion concentrations. When this system is applied to the lipase-catalyzed reaction for the hydrolysis of p-nitrophenol palmitate, it will provide stable and large oil-water reaction interface areas, and the negatively charged lipase will enrich at the emulsion interface by electrostatic adsorption of the positively charged Lig/Chi NPs to achieve immobilization (lipase-Lig/Chi NPs). The reaction conversion rate can reach nearly 100% in 30 min, which is nearly three times higher than that of the conventional two-phase system. Moreover, the lipases in Pickering emulsion stabilized by Lig/Chi NPs exhibit great recyclability because of the protection of Lig/Chi NPs.

Analysis of double-emulsion droplets with ESI mass spectrometry for monitoring lipase-catalyzed ester hydrolysis at nanoliter scale

Microfluidic double-emulsion droplets allow the realization and study of biphasic chemical processes such as chemical reactions or extractions on the nanoliter scale. Double emulsions of the rare type (o1/w/o2) are used here to realize a lipase-catalyzed reaction in the non-polar phase. The surrounding aqueous phase induces the transfer of the hydrophilic product from the core oil phase, allowing on-the-fly MS analysis in single double droplets. A microfluidic two-step emulsification process is developed to generate the (o1/w/o2) double-emulsion droplets. In this first example of microfluidic double-emulsion MS coupling, we show in proof-of-concept experiments that the chemical composition of the water layer can be read online using ESI–MS. Double-emulsion droplets were further employed as two-phase micro-reactors for the hydrolysis of the lipophilic ester p-nitrophenyl palmitate catalyzed by the Candida antarctica lipase B (CalB). Finally, the formation of the hydrophilic reaction product p-nitrophenol within the double-emulsion droplet micro-reactors is verified by subjecting the double-emulsion droplets to online ESI–MS analysis.Graphical abstract

One-Step Biocatalytic Synthesis of Sustainable Surfactants by Selective Amide Bond Formation.

N‐alkanoyl‐N‐methylglucamides (MEGAs) are non‐toxic surfactants widely used as commercial ingredients, but more sustainable syntheses towards these compounds are highly desirable. Here, we present a biocatalytic route towards MEGAs and analogues using a truncated carboxylic acid reductase construct tailored for amide bond formation (CARmm‐A). CARmm‐A is capable of selective amide bond formation without the competing esterification reaction observed in lipase catalysed reactions. A kinase was implemented to regenerate ATP from polyphosphate and by thorough reaction optimisation using design of experiments, the amine concentration needed for amidation was significantly reduced. The wide substrate scope of CARmm‐A was exemplified by the synthesis of 24 commercially relevant amides, including selected examples on a preparative scale. This work establishes acyl‐phosphate mediated chemistry as a highly selective strategy for biocatalytic amide bond formation in the presence of multiple competing alcohol functionalities.

One‐Step Biocatalytic Synthesis of Sustainable Surfactants by Selective Amide Bond Formation**

AbstractN‐alkanoyl‐N‐methylglucamides (MEGAs) are non‐toxic surfactants widely used as commercial ingredients, but more sustainable syntheses towards these compounds are highly desirable. Here, we present a biocatalytic route towards MEGAs and analogues using a truncated carboxylic acid reductase construct tailored for amide bond formation (CARmm‐A). CARmm‐A is capable of selective amide bond formation without the competing esterification reaction observed in lipase catalysed reactions. A kinase was implemented to regenerate ATP from polyphosphate and by thorough reaction optimisation using design of experiments, the amine concentration needed for amidation was significantly reduced. The wide substrate scope of CARmm‐A was exemplified by the synthesis of 24 commercially relevant amides, including selected examples on a preparative scale. This work establishes acyl‐phosphate mediated chemistry as a highly selective strategy for biocatalytic amide bond formation in the presence of multiple competing alcohol functionalities.

Rate enhancement of lipase-catalyzed reaction using CO2-expanded liquids as solvents for chiral tetralol synthesis

The investigation on the applicability of CO2 as a solvent has been increasingly important due to the need to develop efficient reactions replacing ordinary organic solvents derived from fossil fuel with sustainable solvents such as pressurized CO2. In our previous study of solvent engineering of a lipase-catalyzed reaction of bulky substrates, the conversions were higher for the reaction in CO2-expanded liquids, liquids expanded by dissolving pressurized CO2, than that in the liquids without CO2. This study demonstrates the detailed examination of CO2-expanded liquids as solvents for lipase-catalyzed kinetic resolution of racemic 1-tetralol, 2-tetralol, and substituted 1-tetralol analogs since chiral substituted tetralol analogs are important pharmaceutical intermediates. CO2-expanded liquids accelerated the reaction rate by up to 40 times of the reactions without CO2 while maintaining excellent enantioselectivities (E > 200). Preparative scale reactions of racemic 1-tetralol and 2-tetralol successfully gave the corresponding (R)-acetates and (S)-alcohols with high yields and excellent enantioselectivities (up to ee > 99%).

Cyclodextrin-Oligocaprolactone Derivatives-Synthesis and Advanced Structural Characterization by MALDI Mass Spectrometry.

Cyclodextrins have previously been proven to be active in the catalysis of cyclic ester ring-opening reactions, hypothetically in a similar way to lipase-catalyzed reactions. However, the way they act remains unclear. Here, we focus on β-cyclodextrin’s involvement in the synthesis and characterization of β-cyclodextrin-oligocaprolactone (CDCL) products obtained via the organo-catalyzed ring-opening of ε-caprolactone. Previously, bulk or supercritical carbon dioxide polymerizations has led to inhomogeneous products. Our approach consists of solution polymerization (dimethyl sulfoxide and dimethylformamide) to obtain homogeneous CDCL derivatives with four monomer units on average. Oligomerization kinetics, performed by a matrix-assisted laser desorption ionization mass spectrometry (MALDI MS) optimized method in tandem with 1H NMR, revealed that monomer conversion occurs in two stages: first, the monomer is rapidly attached to the secondary OH groups of β-cyclodextrin and, secondly, the monomer conversion is slower with attachment to the primary OH groups. MALDI MS was further employed for the measurement of the ring-opening kinetics to establish the influence of the solvents as well as the effect of organocatalysts (4-dimethylaminopyridine and (–)-sparteine). Additionally, the mass spectrometry structural evaluation was further enhanced by fragmentation studies which confirmed the attachment of oligoesters to the cyclodextrin and the cleavage of dimethylformamide amide bonds during the ring-opening process.

New Nicotinic Acid-based Hydrogel: Swelling and Insulin Uptake Studies

Designing a target-specific insulin delivery via the oral route or the non-invasive mode using the polymer-based drug delivery systems is a research area attracting the researchers' attention worldwide. In the present short communication, we report a new nano-system with a bioactive component, nicotinic acid (NA). It was conjugated via the lipase-catalyzed reaction with polyethylene glycol (PEG400). NA and PEG were taken in a 1:1 molar ratio along with 1% of lipase and reacted at 45 °C. The PEGylated-NA was characterized for its structural aspects using different techniques. Swelling studies were carried out at pH 6.0, 7.0, and 9.0. The order of water uptake was 6.0 > 7.0 > 9.0. The PEGylated-NA was evaluated as a platform to load insulin at pH 7.4 and the physiological temperature of 37 ºC. It showed a high affinity for insulin with uptake of 82.68% with an adsorption capacity of 206.7 mg/g.

Preparation of functionalized pectin through acylation with alkyl gallates: Experiments coupled with density functional theory

The covalent grafting of alkyl gallates onto pectin using a lipase-catalyzed reaction in a tetrahydrofuran/aqueous medium process acylated pectin molecules with excellent antioxidant and antibacterial properties. The alkyl gallates including methyl, ethyl, and propyl gallates were enzymatically grafted onto pectin molecule, in order to study the effect of alkyl gallates on the functional modification of pectin. The grafting mechanism was analyzed by ultraviolet-visible spectrum (UV–Vis), Fourier transform infrared spectrum (FTIR), proton nuclear magnetic resonance (1HNMR), and density functional theory (DFT). Results suggested that lipase grafted 4-OH of alkyl gallate onto pectin by catalyzing esterification in organic/aqueous solution, and the grafting rate was affected by the length of alkyl chain of the gallates molecule. In vitro experiments, the acylated pectins exhibited stronger antioxidant activity in the DPPH test and β-carotene bleaching test and were found to have obvious antimicrobial performance against Escherichia coli and Staphylococcus aureus.

Efficient Synthesis of Stearidonic Acid Enriched Triacylglycerol from Ahiflower Seed Oil via a Two-Step Enzyme Reaction.

Stearidonic acid (SDA) is a plant-based n-3 polyunsaturated fatty acid with multiple biological activities. The enrichment of SDA and synthesis of triacylglycerol (TAG) were carried out consecutively via two lipase-catalyzed reactions, hydrolysis, and esterification. First, SDA was enriched into a glyceride fraction from ahiflower seed oil by Candida rugosa lipase-catalyzed hydrolysis. Under the optimum conditions of 35°C, 0.1% lipase powder of Lipase OF, and 50% buffer solution (based on the weight of total substrate), SDA was enriched from 21.6 to 40.7 wt% in glyceride fraction. SDA-enriched TAG was then synthesized from the SDA-enriched glyceride and the SDA-enriched fatty acid via esterification using an in-house immobilized lipase as a biocatalyst. The SDA-enriched fatty acid was obtained from part of the SDA-enriched glyceride by saponification and the in-house immobilized lipase was prepared from Eversa® Transform 2.0 using Lewatit VP OC 1600 as a carrier. The optimum reaction conditions for the synthesis of TAG were a temperature of 50°C, an enzyme loading of 10%, and a vacuum of 10 mmHg. A maximum conversion to TAG of ca. 94% was achieved after 12 h under the optimum conditions.

Robust and Continuous Lipase-Catalyzed Reactions in Deep Eutectic Solvents: Low Viscosity and Double CLEA-LentiKats Immobilization (CLEA-LK-Lipases).

Deep Eutectic Solvents (DES) are used as reaction media for lipase-catalyzed esterifications in continuous devices. In particular, DES may be useful for lipophilization-like reactions involving substrates with unpaired solubilities. Aspects to be considered are the viscosity of the solvent, as well as the stability of the enzyme in the non-conventional media. The viscosity can be decreased by adding buffer as cosolvent (up to 20% v/v) and keeping the non-conventional nature. Lipases can be stabilized by following a double immobilization pattern, comprising CLEA formation and entrapment in LentiKats®. The low viscosity and high stability of the CLEA-LK-lipase enable the use of DES under flow conditions.