Application In Light-emitting Diodes Research Articles

Reduced-Dimensional Perovskites: Quantum Well Thickness Distribution and Optoelectronic Properties.

Reduced-dimensional perovskites (RDPs), a large category of metal halide perovskites, have attracted considerable attention and shown high potential in the fields of solid-state displays and lighting. RDPs feature a quantum-well-based structure and energy funneling effects. The multiple quantum well (QW) structure endows RDPs with superior energy transfer and high luminescence efficiency. The effect of QW confinement directly depends on the number of inorganic octahedral layers (QW thickness, i.e., n value), so the distribution of n values determines the optoelectronic properties of RDPs. Here, it is focused on the QW thickness distribution of RDPs, detailing its effect on the structural characteristics, carrier recombination dynamics, optoelectronic properties, and applications in light-emitting diodes. The reported distribution control strategies is also summarized and discuss the current challenges and future trends of RDPs. This review aims to provide deep insight into RDPs, with the hope of advancing their further development and applications.

Thin Film Stoichiometry and Defects Management for Low Threshold and Air Stable Near-Infrared Perovskite Laser.

While significant efforts have been devoted to optimize the thin-film stoichiometry and processing of perovskites for applications in photovoltaic and light-emitting diodes, there is a noticeable lack of emphasis on tailoring them for lasing applications. In this study, it is revealed that thin films engineered for efficient light-emitting diodes, with passivation of deep and shallow trap states and a tailored energetic landscape directing carriers toward low-energy emitting states, may not be optimal for light amplification systems. Instead, amplified spontaneous emission (ASE) is found to be sustained by shallow defects, driven by the positive correlation between the ASE threshold and the ratio of carrier injection rate in the emissive state to the recombination rate of excited carriers. This insight has informed the development of an optimized perovskite thin film and laser device exhibiting a low threshold (≈ 60 µJ cm-2) and stable ASE emission exceeding 21 hours in ambient conditions.

Colour tunability of Dy3+ & Sm3+ activated yttrium aluminium gallium nanocrystals for display applications

A set of powder samples of Y3AlGa4O12 doped with Dy3+ and Sm3+ with different concentration of Sm3+ ion were prepared via sol-gel synthesis. X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive (EDS), Fourier transform infrared (FTIR) and photoluminescence spectral studies were carried out. All the diffraction peaks matched the cubic lattice Y3AlGa4O12, as given by the XRD. The SEM images revealed aggregated spherical particles ranging from 50 to 130 nm. The EDS analysis confirmed the presence of the initial chemicals in the synthesized samples. FTIR spectrum was used to examine the vibrational modes in the sample. Under a 366 nm excitation wavelength, the emission spectrum showed the peaks at 492 nm (blue), 580 nm (yellow), 673 nm (red), and 760 nm (near-infrared) corresponding to the characteristic transitions 4F9/2 → 6H15/2,13/2,11/2,9/2 of the Dy3+ ion, respectively. In comparison, the peaks at 568 nm, 614 nm, 664 nm, and 711 nm corresponded to the characteristic transitions 4G5/2 → 6H5/2,7/2,9/2,11/2 of the Sm3+ ion. Under near ultraviolet light excitation, the superposition of these blue, yellow and red colours produced excellent white light emission. The intensities of these transitions varied with the concentration of Sm3+ ion and the excitation wavelength. The emission spectrum of Dy3+ overlapped with the excitation spectrum of Sm3+, indicated possible energy transfer from Dy3+ to Sm3+. According to Inokuti-Hirayama's theory of energy transfer, the mechanism of energy transfer was understood to be quadrupole-quadrupole interaction. The CIE chromaticity co-ordinates and correlated colour temperature values showed that these samples were suitable for light-emitting diode applications.

Investigation on luminescent characteristics of Tb3+/Dy3+co-doped boro-phosphate glass for cool white LED and radiation shielding applications

The Tb3+/Dy3+ co-doped Boro-Phosphate Glass (BPANZDyTb) was produced (40 B2O3 + 39P2O5 + 5 Al2O3 + 5 NaF + 10 ZnO + 0.5 Tb2O3 + 0.5 Dy2O3) using melt-quenching technique. X-ray diffraction measurements, Raman, and Fourier Transform Infrared were used to evaluate the structural behavior of the prepared glass. Powder-XRD spectra, in the 10–90° range showed that the prepared glass was amorphous. FTIR analysis reveals that the network contains a variety of structural groups, including B-O-B, BO4, BO, P-O, PO2, P-O-B, and PO4 units. The UV–visible diffuse reflectance spectroscopy was used to record and study the optical linear properties of Tb3+/Dy3+ co-doped Boro-Phosphate Glass (BPANZDyTb). The photoluminescence excitation peak was obtained at 348 nm. The emission peaks were located at 484 nm (4F9/2 → 6H15/2 → blue), 576 nm (4F9/2 → 6H13/2 → yellow), and 662 nm (4F9/2 → 6H11/2 → red). Tb3+ ions are located at 412 nm (5D3 → 7F5), 441 nm (5D3 → 7F4), 546 nm (5D4 → 7F5), and 625 nm (5D4 → 7F3). The result of CIE 1931 chromaticity coordinates indicate that the prepared glass is suitable material for cold white light emitting diode applications due to its color coordinates x = 0.3106 and y = 0.3240 and correlated color temperature (CCT) values about 6768 K. The gamma-ray parameters such as half-value layer (HVL), mass attenuation coefficient (μ/ρ), mean free path (MFP), and effective atomic number (Zeff) of the BPANZDyTb glass were studied using Phy-X software. The results of the gamma-ray parameter show that the Dy3+ ions and Tb3+ ions co-doped BoroPhosphate glass is an appropriate material for radiation shielding applications.

Dipole-assisted hole injection for efficient blue quantum dot light-emitting diodes

Quantum dot light-emitting diodes (QLEDs) present commercial potential and application prospects in both lighting and display technologies. Blue quantum dots (QDs) possess a substantial bandgap and a profound valence band. The significant potential barrier between blue quantum dots and the hole transport layer leads to an imbalance in charge transfer, thereby adversely impacting the device performance. Self-assembled monolayers are attractive for carrier transport. Here, a dynamic self-assembly method is introduced, doping [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz) into Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) to form electric dipoles at interfaces, realizing better energy level alignment and hole injection rate. The maximum external quantum efficiency rises from 8.77% to 17.26% with 2PACz: PEDOT:PSS strategy, representing a twofold enhancement. This result demonstrates that small molecules undergo dynamic self-assembled bilateral motions during crystallization process, aligning energy levels and passivating interfacial trap states, thereby endowing blue QLEDs with high brightness and high efficiency. This work offers a viable pathway for broader applications of blue QLEDs.

Efficient and Near-Zero Thermal Quenching Cr3+-Doped Garnet-Type Phosphor for High-Performance Near-Infrared Light-Emitting Diode Applications.

In recent years, near-infrared (NIR) phosphors have attracted great research interest due to their unique physical properties and broad application prospects. However, obtaining NIR phosphors with both high quantum efficiency and excellent thermal stability remains a great challenge. In this study, novel NIR Ca3Mg2ZrGe3O12:Cr3+ phosphors were successfully prepared using a high-temperature solid-phase method, and the structure and luminescent properties of the material were systematically investigated. Ca3Mg2ZrGe3O12:0.01Cr3+ emits NIR light in the range of 600 to 900 nm with a peak at 758 nm and a half-height width of 89 nm under the excitation of 457 nm blue light. NIR luminescence shows considerable quantum efficiency, and the internal quantum efficiency of the optimized sample is up to 68.7%. Remarkably, the Ca3Mg2ZrGe3O12:0.01Cr3+ phosphor exhibits a near-zero thermal quenching behavior, and the luminescence intensity of the sample at 250 °C maintains 92% of its intensity at room temperature. The mechanism of high thermal stability has been elucidated by calculating the Huang Kun factor and activation energy. Finally, NIR pc-LED devices prepared from Ca3Mg2ZrGe3O12:0.01Cr3+ phosphor with commercial blue LED chips have good performance, proving that this Ca3Mg2ZrGe3O12:0.01Cr3+ NIR phosphor has potential applications in night vision and biomedical imaging.

Highly saturated red-emitting novel europium doped yttrium calcium borate (Eu3+: Y2CaB10O19) phosphor materials for eco-friendly solid-state lighting applications

Optical parameters like low correlated color temperature (CCT), color rendering index (CRI), color purity, thermal stability and etc. are crucial parameters for the practical applications of white light emitting diode applications. High color purity around 100 % red emitting novel europium doped yttrium calcium borate (Eu3+: Y2CaB10O19) phosphors were harvested by conventional solid-state synthesis technique. The novel host material possesses monoclinic crystal structure with no observable shift in the diffraction lines with varying dopant concentrations. FTIR studies revealed the presence of BO3 and BO4 networks in the host lattice responsible for structural rigidity and good thermal stability. The phosphor materials synthesized xEu3+: Y2CaB10O19 (x = 0.01, 0.03, 0.05, 0.07 and 0.09), are sensitive to both 250 nm (UV) and 393 nm (Near UV/blue LED) for excitation that can produce deep orange (594 nm) emission along with red emission (612 nm). The optimum Eu3+ ion concentration was fixed at 5 mol% of dopant ions to prevent the concentration quenching. As prepared optimal phosphor material possesses high color purity around 100 %, CCT of 1214 K defines its applicability in WLED applications. The synthesized phosphor materials pertain excellent switching response, thermal stability and the fabricated P-i-G possesses desired photometric parameters for its practical applications.

Large-Scale Mechanochemical Synthesis of Cesium Lanthanide Chloride for Radioluminescence.

Cesium lanthanide chloride (Cs3LnCl6), a recently developed class of lanthanide-based zero-dimensional metal halides, has garnered a significant amount of interest because of its potential applications in scintillators, light-emitting diodes, and photodetectors. Although cesium lanthanide chloride demonstrates exceptional scintillator properties, conventional synthesis methods involving solid-state and solution-phase techniques are complex and limited on the reaction scale. This study presents a facile mechanochemical synthesis method for producing Cs3CeCl6, Cs3TbCl6, and Cs3EuCl6 metal halides on a 5 g scale. These materials exhibit intense blue-violet, green, and red emissions upon ultraviolet excitation, with high photoluminescence quantum yields ranging from 54% to 93%. Furthermore, Cs3CeCl6, Cs3TbCl6, and Cs3EuCl6 metal halides exhibit intense radioluminescence spanning from the ultraviolet to the visible region. This research shows the potential of the scalable mechanochemical synthesis of lanthanide-based metal halides for the advancement of luminescent materials for scintillators.

Computational fluid dynamics of free convection and radiation on thermal performance of light emitting diode applications with trapezoidal-finned heat sink

The reduction in energy consumption through the energy performance improvement in the use of artificial lighting system found in all sectors of the economy is one of the very important strategies of achieving sustainable energy development. In contrast to conventional lighting, light-emitting diodes (LEDs) provide better energy efficiency. To effectively optimize the performance and efficiency of the LED lighting, the LED heat needs to be dissipated adequately. In the present work, the cooling performance of a radial heat sink with trapezoidal fins is numerically investigated under the consideration of natural convection and radiation. The study investigated the influence of the number of fins (20≤Nf≤36), the height of the fins (15mm≤hfH≤35mm) and the applied heat flux (300W/m2≤q˙≤1100W/m2) on the thermal resistance (Rth) and heat transfer coefficient (havg) of the heat sink. The numerical results obtained from this work were validated with literature, and an excellent agreement was established. The results found that both the Rth and the havg of the heat sink decreased as the number of fins (Nf) and fin height (hfH) increased. Meanwhile, the number of fins (Nf) has an optimal value for achieving the heat sink's effective cooling performance.

Design and performance of sulfur and selenium-substituted triarylboron D3-A TADF emitters for OLED applications

This study presents the design, synthesis, and comprehensive theoretical and photophysical analysis of two new D3-A type thermally activated delayed fluorescence (TADF) emitters for organic light-emitting diode (OLED) applications. Utilizing a triarylboron core as the electron-accepting group and phenothiazine (PTZ) or phenoselenazine (PSZ) as electron-donating units, the molecules BTP-S and BTP-Se were developed. The D3-A structure supports the separation of frontier molecular orbitals (FMOs), leading to minimized singlet-triplet energy gaps (ΔEST), which are crucial for the TADF mechanism. Density functional theory (DFT) calculations presented that BTP-S and BTP-Se exhibit band gaps (Eg) of 2.52 and 3.23 eV, respectively, with BTP-S showing an ΔEST value as low as 0.007 eV for the S1-T1 transition at the lowest energy conformation. Photophysical studies revealed high photoluminescence quantum yields (PLQYs) for both compounds, with BTP-S achieving up to 85 % in mCP films and BTP-Se up to 59 %. In vacuum-processed OLEDs, BTP-S achieved a maximum external quantum efficiency (EQE) of 25.3 %, a current efficiency (ηc) of 195.8 cd/A, and a maximum luminance (Lmax) of 17356 cd/m2, while BTP-Se reached an EQE of 7.5 %, an ηc of 132.19 cd/A, and an Lmax of 16826 cd/m2 likely limited by the contributions of a folded-donor conformer enabled by the Se substitution. These findings underscore the impact of donor unit selection and conformation on the TADF characteristics, and provide valuable insights for designing high-performance OLED materials.

Exploring γ and UV irradiation responses on thermoluminescence and optical thermometry studies on Y4Al2O9:Ho3+ nanophosphor

A series of green emitting Ho3+ (1–9 mol%) doped Y4Al2O9 nanophosphors (NPs) are synthesized via solution combustion technique. Photoluminescence (PL) studies shows emission peaks recorded at ∼ 522 nm (5F3→5I8), 545 (5F4, 5S2→5I8), 659 (5F5→5I8) and 730 (5F4→5I7) upon excited at 460 nm wavelength. With a tremendous potential for application in white light-emitting diodes (w-LEDs), the phosphors show a bright green emission under 460 nm excitation. They also have a notable activation energy (0.31 eV), high color purity (98.2 %), and a remarkable quantum yield (87.1 %). Most astonishingly, even at temperatures as high as 420 K, YAO:5Ho3+nanoparticles retain 88.9 % of their initial fluorescence intensity. Using the fluorescence intensity ratio (FIR) method, the temperature sensing potential is also investigated. Thermoluminescence (TL) glow curves of γ (1 kGy) and UV (1 h) irradiated YAO:Ho3+(1–9 mol%) NPs exhibit two glow curves and highest intensity is recorded for YAO:5Ho3+NPs. TL characteristics of 5 mol% Ho3+ doped YAO NPs are subjected to γ (1 Gy-5 kGy) and UV (0.25–6 h) irradiation. Two glow curves recorded at 475 K (major peak) and 567 K (shouldered peak) for γ irradiation. However, for UV irradiation two glow curves at 478 K (major peak) and 575 K (shouldered peak) are recorded utilizing a 5 °C per minute heating rate. TL intensity varies with γ and UV exposure is recorded for optimized NPs and major glow peaks showcase linear response for both γ and UV irradiations, indicating that the prepared phosphor can be used in TL personal dosimetry. Furthermore, compared to γ-irradiated phosphor, UV-irradiated phosphor shows greater fading. The overall results clearly demonstrate that the optimized phosphor has proven to be an outstanding candidate for multifunctional applications.

Full-color biomass carbon dots for high-level information encryption and multi-color light emitting diode applications.

Six biomass carbon dots (BCDs) with adjustable emission from 450 to 680nm under a single wavelength excitation were successfully synthesized from spinach via solvent control strategy. The obtained BCDs show blue, green, yellow, violet, pink, and red emission with high photoluminescence quantum yield (PLQY = 12.68 ~ 30.77%). Detailed characterizations disclose that the tunable-emission mechanism is caused by the synergistic effect of carbon conjugate and surface oxidation degree. Meanwhile, full-color photoluminescence BCDs/PVP powder and BCDs/PVP/PVA films were fabricated by utilizing the prepared BCDs combined with polyvinylpyrrolidone (PVP) and polyvinyl alcohol (PVA), respectively, which presented excellent high-level information encryption application. Importantly, multi-color and white light-emitting diode (LED) with Commission Internationale de L' Eclairage (CIE) of blue (0.25, 0.29); green (0.25, 0.31); yellow (0.42, 0.45); red (0.52, 0.31); and white (0.32, 0.31) were achieved by only using our prepared BCDs. This work provides a valuable strategy of preparing multi-color BCDs using readily available biomass materials and paves a way for high-level information encryption and LED applications.

Substitutional effects of the anionic group systems [BO33−], [PO43− ], and [SO42−] on the down-conversion photoluminescence properties of Y2O3:Er3+ nanophosphors

A series of Y2O3, Y2O3: Er3+ (1 %) and Y2O3-AG: Er3+ (1 %) (where AG = BO33−, PO43−, and SO42−) nanophosphors were prepared via a chemical combustion technique. The primary X-ray powder diffraction results showed that the Y2O3:Er3+ phosphor materials crystallized into a cubic standard structure, while the Y2O3-AG: Er3+ phosphor materials transformed to hexagonal and tetragonal structures for the [PO43−] and [BO33−]-based phosphors, respectively. However, no changes were observed for the [SO42−]-based phosphor materials. The scanning electron microscope micrographs revealed that the particles were formed in the nanometre range with different sizes and shapes. The fourier-transformed infrared spectra showed the presence of various structural groups in the pure Y2O3 and Y2O3-AG: Er3+ phosphors. In addition to that, the optical bandgap energy values were obtained using the diffuse reflection spectra (DRS) spectra and Kubelka-Munk function theory. Under UV-379 nm excitation for the Y2O3-AG: Er3+ phosphors, the Y2O3–SO4: Er3+ emitted the most intense green light at 563 nm wavelength. The Commission Internationale de l'Elcairage colour coordinates and correlated color temperature values indicated that the Y2O3:Er3+, Y2O3-PO4:Er3+, and Y2O3–SO4:Er3+ phosphor materials are potential candidates for producing enhanced green color components in white light-emitting diode (w-LED) applications.

Electronic defect engineering of double-doped β-KYF4:Eu3+,Bi3+ red phosphors: Negative thermal quenching and applications for high-efficiency white light-emitting diodes

Commercial WLEDs in a cold white light with a lower color rendering index(Ra) and higher correlated color temperature due to the lack of a red component. Therefore, we propose to develop a non-oxide rare-earth-based red phosphor with excellent luminescence performance and thermal stability. The crystal phases, particle morphology, elemental states, photoluminescence(PL) behavior, and electronic structure were characterized. The Density Functional Theory (DFT) calculation was carried out to reveal the mechanisms of the crystal and electronic structures on the photoluminescent properties and the associated energy-transfer mechanisms. Furthermore, the optimal double-doped KYF4 phosphor with negative thermal quenching and the yellow phosphor YAG:Ce3+ were co-assembled into LEDs, which exhibited a warm white light with a color rendering index of 93.9 and a correlated color temperature of 4275 K under a driving current of 9 mA. These results indicate that the optimized phosphor has considerable potential for application in red light supplements for WLEDs.

Unlocking the Potential of Organic-Inorganic Hybrid Manganese Halides for Advanced Optoelectronic Applications.

Organic-inorganic hybrid manganese(II) halides (OIMnHs) have garnered tremendous interest across a wide array of research fields owing to their outstanding optical properties, abundant structural diversity, low-cost solution processibility, and low toxicity, which make them extremely suitable for use as a new class of luminescent materials for various optoelectronic applications. Over the past years, a plethora of OIMnHs with different structural dimensionalities and multifunctionalities such as efficient photoluminescence (PL), radioluminescence, circularly polarized luminescence, and mechanoluminescence have been newly created by judicious screening of the organic cations and inorganic Mn(II) polyhedra. Specifically, through precise molecular and structural engineering, a series of OIMnHs with near-unity PL quantum yields, high anti-thermal quenching properties, and excellent stability in harsh conditions have been devised and explored for applications in light-emitting diodes (LEDs), X-ray scintillators, multimodal anti-counterfeiting, and fluorescent sensing. In this review, the latest advancements in the development of OIMnHs as efficient light-emitting materials are summarized, whichcovers from their fundamental physicochemical properties to advanced optoelectronic applications, with an emphasis on the structural and functionality design especially for LEDs and X-ray detection and imaging. Current challenges and future efforts to unlock the potentials of these promising materials are also envisioned.

Dazzling red-emitting Ca2EuMO6 (M = Sb, Nb, Ta) double-perovskite phosphors with potential application in phosphor-converted white light-emitting diodes

In this paper, three new efficient Eu3+-activated Ca2EuMO6 (M = Sb, Nb, and Ta) red-emitting phosphors with outstanding luminescence properties were prepared by using the high-temperature solid-state reaction method. X-ray diffraction and Rietveld refinements revealed the double-perovskite structure of Ca2EuMO6 (M = Sb, Nb, and Ta) compounds. Photoluminescent excitation and emission spectra, decay lifetimes, CIE chromaticity coordinates, color purity values, internal quantum efficiency, and thermal stability were discussed in detail. Under the excitation of 395 nm near-ultraviolet light, these Ca2EuMO6 (M = Sb, Nb, and Ta) phosphors demonstrated bright narrow-band red emissions with peaks at 592, 620, 656, and 703 nm due to the 5D0→7FJ (J = 1–4) transitions of Eu3+ ions. The internal quantum efficiencies of the Ca2EuSbO6, Ca2EuNbO6, and Ca2EuTaO6 samples were determined to be 39.3%, 41.6%, and 40.4%, respectively. Impressively, the emission intensity of Ca2EuNbO6 is about 1.25 times higher than that of commercial Y2O3:Eu3+ red phosphor. CIE color coordinates of Ca2EuMO6 (M = Sb, Nb, and Ta) phosphors were calculated to be (0.6748, 0.3250), (0.6800, 0.3198), and (0.6790, 0.3208), respectively; along with high color purity of 90.7%, 93.2%, and 92.7%. Besides, their thermal stability was also investigated, and the corresponding emission intensities of Ca2EuMO6 (M = Sb, Nb, and Ta) at 423 K were respectively maintained at 73%, 86%, and 80% of that at 303 K. All results show that these newly developed red-emitting Ca2EuMO6 (M = Sb, Nb, and Ta) phosphors possess potential applications in white light-emitting diodes.

Mitochondria-targeted sonodynamic modulation of neuroinflammation to protect against myocardial ischemia‒reperfusion injury

Sympathetic hyperactivation and inflammatory responses are the main causes of myocardial ischemia‒reperfusion (I/R) injury and myocardial I/R-related ventricular arrhythmias (VAs). Previous studies have demonstrated that light-emitting diodes (LEDs) could modulate post-I/R neuroinflammation, thus providing protection against myocardial I/R injury. Nevertheless, further applications of LEDs are constrained due to the low penetration depth (<1 cm) and potential phototoxicity. Low-intensity focused ultrasound (LIFU), an emerging noninvasive neuromodulation strategy with deeper penetration depth (∼10 cm), has been confirmed to modulate sympathetic nerve activity and inflammatory responses. Sonodynamic therapy (SDT), which combines LIFU with sonosensitizers, confers additional advantages, including superior therapeutic efficacy, precise localization of neuronal modulation and negligible side effects. Herein, LIFU and SDT were introduced to modulate post-myocardial I/R neuroinflammation to protect against myocardial I/R injury. The results indicated that LIFU and SDT inhibited sympathetic neural activity, suppressed the activation of astrocytes and microglia, and promoted microglial polarization towards the M2 phenotype, thereby attenuating myocardial I/R injury and preventing I/R-related malignant VAs. These insights suggest that LIFU and SDT inspire a noninvasive and efficient neuroinflammatory modulation strategy with great clinical translation potential thus benefiting more patients with myocardial I/R in the future. Statement of significanceMyocardial ischemia-reperfusion (I/R) may cause I/R injury and I/R-induced ventricular arrhythmias. Sympathetic hyperactivation and inflammatory response play an adverse effect in myocardial I/R injury. Previous studies have shown that light emitting diode (LED) can regulate I/R-induced neuroinflammation, thus playing a myocardial protective role. However, due to the low penetration depth and potential phototoxicity of LED, it is difficult to achieve clinical translation. Herein, we introduced sonodynamic modulation of neuroinflammation to protect against myocardial I/R injury, based on mitochondria-targeted nanosonosensitizers (CCNU980 NPs). We demonstrated that sonodynamic modulation could promote microglial autophagy, thereby preventing myocardial I/R injury and I/R-induced ventricular arrhythmias. This is the first example of sonodynamic modulation of myocardial I/R-induced neuroinflammation, providing a novel strategy for clinical translation.

Near-infrared-emitting (Gd1-yNdy)3(Ga1-xCrx)5O12 Glass Ceramic Phosphors for Light-emitting Diodes

In this study, we proposed a blue-excitable and near-infrared (NIR) emission ceramic phosphor - Gd3Ga5O12:Cr3+, Nd3+ (GGO:Cr, Nd) by a solid-state reaction for light-emitting diode applications. The as-synthesized Gd3Ga4.95Cr0.05O12 phosphor displayed a broad emission peak at 759 nm (4T2 → 4A2) with a full-width-half-maximum of 122 nm under 460 nm excitation. In order to generate NIR, we introduced Nd3+ ions as activators to substitute Gd3+ ions in GGO:Cr3+ phosphors. Via energy transfer from Cr3+ ions to Nd3+ ions in GGO, an intense NIR emission at 1064 nm resulting from 4F3/2 → 4I11/2 is demonstrated. Furthermore, we investigate the doping effects at various concentrations and reanalyzed the luminescent characteristics of (Gd1-yNdy)3(Ga1-xCrx)5O12 phosphors to determine the optimal doping concentration of Cr and Ni, which were found to be 1 mol.% and 3 mol.%, respectively. Finally, we mix the composition-optimized (Gd0.97Nd0.03)3(Ga0.99Cr0.01)5O12 NIR-emission phosphor with silica-based glass powder. After cold pressing and high-temperature sintering using molds, we obtain NIR-emitting glass-ceramic phosphors through laser cutting technology and packaged them into high-power light-emitting diodes.

Tunable Narrowband to Wideband emission of Mn2+, Eu2+ Co-doped GdMgAl11O19 for multifunctional applications

As the widespread application of white light-emitting diodes (WLEDs) in lighting field and liquid crystal display (LCD) backlight, the development of phosphors toward multifunctional applications is considered to be an inevitable tendency. In this work, multi-color light emissions have been realized in Eu2+ and Mn2+-activated magnetoplumbite-type GdMgAl11O19 (GMAO) along with adjustable photoluminescence properties. Significantly, a promising narrow-band green light emission can be achieved by Mn2+-activated GMAO with the full width at half maximum (FWHM) of 27 nm, and such narrow emission band makes the as-prepared WLED device reach 121 % of National Television Standards Committee (NTSC), which can act as an ideal LCD backlight. On the other hand, the broad cyan light can be achieved in Eu2+-activated GMAO. Moreover, multi-color light emissions have been realized in Eu2+ and Mn2+ co-doped GMAO, and the energy transfer from Eu2+ to Mn2+ ions was established. Benefitting from the broad band cyan light emission of Eu2+ ion, a promising WLED device with high color rendering index (CRI) of 90 has been fabricated by using Eu2+ and Mn2+ co-doped sample. The result indicates the multifunctional applications of the GMAO modulated by Eu2+ and Mn2+ activators.

Eco-friendly synthesis of red-emissive carbon dots for visual alcohol detection and light-emitting diodes

Red-emissive carbon dots (R-CDs) is highly desired in developing full-color solid-state lighting and display applications based on CDs. Developing simple and eco-friendly methods to produce R-CDs is extremely desirable. In this work, two types of R-CDs were obtained via simple and eco-friendly grinding-heating or solvothermal methods using fresh spinach leaves as the carbon source, respectively. The obtained R-CDs naturally possess surface functional groups. These R-CDs were effectively used as sensitive probes for detecting alcohol (including alcohol gas and liquor detection) due to the synergistic effect of the nitrogen-containing surface groups on the R-CDs and the oxhydryl groups in the alcohol solution. Finally, red electroluminescence was achieved by mixing the R-CDs with polyvinyl pyrrolidone as the phosphor layer on a blue light-emitting diode (LED) chip. This work paves the way for the further development of R-CDs in fluorescence probes and full-color LED applications.