Light-driven Molecular Motors Research Articles

Bending Actuation of Hydrogels through Rotation of Light-Driven Molecular Motors.

The unidirectional rotation of chemically crosslinked light-driven molecular motors is shown to progressively shift the swelling equilibrium of hydrogels. The concentration of molecular motors and the initial strand density of the polymer network are key parameters to modulate the macroscopic contraction of the material, and both parameters can be tuned using polymer chains of different molecular weights. These findings led to the design of optimized hydrogels revealing a half-time contraction of approximately 5 min. Furthermore, under inhomogeneous stimulation, the local contraction event was exploited to design useful bending actuators with an energy output 400 times higher than for previously reported self-assembled systems involving rotary motors. In the present configuration, we measure that a single molecular motor can lift up loads of 200 times its own molecular weight.

Innentitelbild: Bending Actuation of Hydrogels through Rotation of Light‐Driven Molecular Motors (Angew. Chem. 13/2023)

Light-driven molecular motors were used as photoactive crosslinks in hydrogels. Their unidirectional rotation under UV light triggers a shift in the equilibrium swelling of the networks because of the creation of new entanglements. In their Research Article (e202300263), Nicolas Giuseppone and co-workers exploit this actuation to perform mechanical work and show that individual motors can lift loads at least 200 times heavier than their own molecular weight, reminiscent of ants in the macroscopic world.

Coupled Rotary and Oscillatory Motion in a Second-Generation Molecular Motor Pd Complex.

Molecular machines offer many opportunities for the development of responsive materials and introduce autonomous motion in molecular systems. While basic molecular switches and motors carry out one type of motion upon being exposed to an external stimulus, the development of molecular systems capable of performing coupled motions is essential for the development of more advanced molecular machinery. Overcrowded alkene-based rotary molecular motors are an ideal basis for the design of such systems as they undergo a controlled rotation initiated by light allowing for excellent spatio-temporal precision. Here, we present an example of a Pd complex of a second-generation rotary motor whose Pd center undergoes a coupled oscillatory motion relative to the motor core upon rotation of the motor. We have studied this phenomenon by UV-vis, NMR, and density functional theory calculations to support our conclusions. With this demonstration of a coupled rotation-oscillation motion powered by a light-driven molecular motor, we provide a solid basis for the development of more advanced molecular machines integrating different types of motion in their operation.

Simultaneously improving the efficiencies of photo- and thermal isomerization of an oxindole-based light-driven molecular rotary motor by a structural redesign.

We designed a novel highly efficient light-driven molecular rotary motor theoretically by using electronic structure calculations and nonadiabatic dynamics simulations, and it showed excellent performance for both photo- and thermal isomerization processes simultaneously. By the small structural modification based on 3-(2,7-dimethyl-2,3-dihydro-1H-inden-1-ylidene)-1-methylindolin-2-one (DDIYM) synthesized by Feringa et al. recently, an oxindole-based light-driven molecular rotary motor, 3-(1,5-dimethyl-4,5-dihydrocyclopenta[b]pyrrol-6(1H)-ylidene)-1-methylindolin-2-one (DDPYM), is proposed, which displays a significant electronic push-pull character and weak steric hindrance for double-bond isomerization. The newly designed motor DDPYM shows a remarkable improvement of the quantum yield for both EP → ZM and ZP → EM photoisomerization processes, compared to the original motor DDIYM. Furthermore, the rotary motion in photoisomerization processes of DDPYM behaves more like a pure axial rotational motion approximately, while that of DDIYM is an obvious precessional motion. The weakness of the steric hindrance reduces the energy barriers of the thermal helix EM → EP and ZM → ZP inversion steps, and would accelerate two ground-state isomerization steps significantly. Our results confirm the feasibility of simultaneously improving the efficiencies of photo- and thermal isomerization of oxindole-based light-driven molecular rotary motors and this design idea sheds light on the future development of more efficient molecular motors.

Enlightening dynamic functions in molecular systems by intrinsically chiral light-driven molecular motors.

Chirality is a fundamental property which plays a major role in chemistry, physics, biological systems and materials science. Chiroptical artificial molecular motors (AMMs) are a class of molecules which can convert light energy input into mechanical work, and they hold great potential in the transformation from simple molecules to dynamic systems and responsive materials. Taking distinct advantages of the intrinsic chirality in these structures and the unique opportunity to modulate the chirality on demand, chiral AMMs have been designed for the development of light-responsive dynamic processes including switchable asymmetric catalysis, chiral self-assembly, stereoselective recognition, transmission of chirality, control of spin selectivity and biosystems as well as integration of unidirectional motion with specific mechanical functions. This review focuses on the recently developed strategies for chirality-led applications by the class of intrinsically chiral AMMs. Finally, some limitations in current design and challenges associated with recent systems are discussed and perspectives towards promising candidates for responsive and smart molecular systems and future applications are presented.

Theoretical study on the working mechanism and computational evidence of robust imine-based light-driven molecular motor

We report quantum chemical calculations of two kinds of N-alkyl imine-based light-driven rotary motors by using time-dependent density functional theory. A new transition structure was found in the thermal isomerization. Based on the latter, we present a ‘3-step’ rotation process and reveal the full working mechanism in the ground state. Furthermore, we theoretically verified the robustness of the motors through pendant group substitution of the rotator in the fjord region. As a result, the free-energy barriers of the rate-limiting thermal steps are capable to hold their robustness, which makes these motors more promising in potential machine fabrication at molecular level.

Towards the engineering of a photon-only two-stroke rotary molecular motor

The rational engineering of photoresponsive materials, e.g., light-driven molecular motors, is a challenging task. Here, we use structure-related design rules to prepare a prototype molecular rotary motor capable of completing an entire revolution using, exclusively, the sequential absorption of two photons; i.e., a photon-only two-stroke motor. The mechanism of rotation is then characterised using a combination of non-adiabatic dynamics simulations and transient absorption spectroscopy measurements. The results show that the rotor moiety rotates axially relative to the stator and produces, within a few picoseconds at ambient T, an intermediate with the same helicity as the starting structure. We discuss how such properties, that include a 0.25 quantum efficiency, can help overcome the operational limitations of the classical overcrowded alkene designs.

Coupled Rocking Motion in a Light-Driven Rotary Molecular Motor.

Coupled motion is ubiquitous in Nature as it forms the base for the direction, amplification, propagation, and synchronization of movement. Herein, we present experimental proof for the coupling of the rocking motion of a dihydroanthracene stator moiety with the light-induced rotational movement of an overcrowded alkene-based molecular motor. The motor was desymmetrized, introducing two different alkyl substituents to the stator part of the molecular scaffold, resulting in the formation of two diastereomers with opposite axial chirality. The structure of the two isomers is determined with nuclear Overhauser effect spectroscopy NMR and single-crystal X-ray analysis. The desymmetrization enables the study of the coupled motion, that is, rotation and oscillation, by 1H NMR, findings that are further supported by density functional theory calculations. A new handle to regulate the rotational speed of the motor through functionalization in the bottom half was also introduced, as the thermal barrier for thermal helix inversion is found to be largely dependent on the alkyl substituents and its orientation toward the upper half of the motor scaffold. In addition to the commonly observed successive photochemical and thermal steps driving the rotation of the motor, we find that the motor undergoes photochemically driven rotation in three of the four steps of the rotation cycle. Hence, this result extends the scope of molecular motors capable of photon-only rotary behavior.

Synergistic interplay between photoisomerization and photoluminescence in a light-driven rotary molecular motor

Photoactuators and photoluminescent dyes utilize light to perform mechanical motion and undergo spontaneous radiation emission, respectively. Combining these two functionalities in a single molecule would benefit the construction of advanced molecular machines. Due to the possible detrimental interaction between the two light-dependent functional parts, the design of hybrid systems featuring both functions in parallel remains highly challenging. Here, we develop a light-driven rotary molecular motor with an efficient photoluminescent dye chemically attached to the motor, not compromising its motor function. This molecular system shows efficient rotary motion and bright photoluminescence, and these functions can be addressed by a proper choice of excitation wavelengths and solvents. The moderate interaction between the two parts generates synergistic effects, which are beneficial for lower-energy excitation and chirality transfer from the motor to the photoluminescent dye. Our results provide prospects towards photoactive multifunctional systems capable of carrying out molecular rotary motion and tracking its location in a complex environment.

Programming and Dynamic Control of the Circular Polarization of Luminescence from an Achiral Fluorescent Dye in a Liquid Crystal Host by Molecular Motors.

Circular polarized light is utilized in communication and display technologies and a major challenge is to develop systems that can be switched between left and right circular polarized luminescence with high degrees of polarization and enable multiple addressable stable states. Luminescent dyes in Liquid Crystal (LC) cholesteric phases are attractive systems to generate, amplify and modulate circularly polarized luminescence (CPL). In the present study, we employ light-driven molecular motors as photo-controlled chiral dopants in LCs to switch the handedness of the LC and the circular polarization of luminescence from an achiral dye embedded in the mesogenic material. Tuning of the color of the CPL and the retention time of the photoprogrammed helicity is demonstrated making use of a variety of motors and dyes. The flexibility offered by the design based on inherently chiral unidirectional rotary motors provides full control over CPL non-invasively by light, opening possibilities for pixilated displays with externally addressable polarization.

Effect of Temperature on Photoisomerization Dynamics of a Newly Designed Two-Stroke Light-Driven Molecular Rotary Motor.

The working mechanism of conventional light-driven molecular rotary motors, especially Feringa-type motors, contains two photoisomerization steps and two thermal helix inversion steps. Due to the existence of a thermal helix inversion step, both the ability to work at lower temperatures and the rotation speed are limited. In this work, a two-stroke light-driven molecular rotary motor, 2-(1,5-dimethyl-4,5-dihydrocyclopenta[b]pyrrol-6(1H)-ylidene)-1,2-dihydro-3H-pyrrol-3-one (DDPY), is proposed, which is capable of performing unidirectional and repetitive rotation by only two photoisomerization (EP→ZP and ZP→EP) steps. With trajectory surface-hopping simulation at the semi-empirical OM2/MRCI level, the EP→ZP and ZP→EP nonadiabatic dynamics of DDPY were systematically studied at different temperatures. Both EP→ZP and ZP→EP photoisomerizations are on an ultrafast timescale (ca. 200–300 fs). The decay mode of EP→ZP photoisomerization is approximately bi-exponential, while that of ZP→EP photoisomerization is found to be periodic. For EP and ZP isomers of DDPY, after the S→S excitation, the dynamical processes of nonadiabatic decay are both followed by twisting about the central C=C double bond and the pyramidalization of the C atom at the stator-axle linkage. The effect of temperature on the nonadiabatic dynamics of EP→ZP and ZP→EP photoisomerizations of DDPY has been systematically investigated. The average lifetimes of the S excited state and quantum yields for both EP→ZP and ZP→EP photoisomerization are almost temperature-independent, while the corresponding unidirectionality of rotation is significantly increased (e.g., 74% for EP→ZP and 72% for ZP→EP at 300 K vs 100% for EP→ZP and 94% for ZP→EP at 50 K) with lowering the temperature.

Visiblelight-driven benzofuranone-based molecular motors: tuning rotary performance from solution phase to solid state

The advance of artificial molecular motors undoubtedly requires more versatile and tailored molecular scaffolds to achieve outstanding functions not only in the solution phase but also in the solid state. Herein, a novel type of light-driven unidirectional molecular motor based on benzofuranones was rationally designed and synthesized. Employment of the π-extension and electron donation strategies enabled several motors responsive to visible light with decent quantum yields and photoisomerizing efficiency at their photostationary states. In particular, one motor was responsive to 550 nm green light, representing the longest excitation wavelength up-to-now by one-photon excitation technique among the family of light-driven molecular motors. Moreover, the high biocompatibility and good performance under bio-environments hold these motors' enormous potential in biosciences. Importantly, these motors showed uncompromised rotary functions in condensed phases, such as soft supramolecular gel and solid polymeric films, laying a good foundation for the future design of motorized processible materials. The line of this work is assumed to promote the current focus of motor dynamics from the routine solution phase to the more practical condensed phase material systems. And the new motors explored here would offer a unique toolbox for motorists to perform the on-demand building of dynamic complexes.

New era of sustainable design for molecular motors

Native lignocellulose can be used to create light-driven molecular motors via a “green” synthetic approach. In the May issue of Green Chemistry , Barta, Feringa, and co-workers provided new insights into the sustainable design of molecular motors through reductive catalytic fractionation using a lignocellulose platform. Native lignocellulose can be used to create light-driven molecular motors via a “green” synthetic approach. In the May issue of Green Chemistry , Barta, Feringa, and co-workers provided new insights into the sustainable design of molecular motors through reductive catalytic fractionation using a lignocellulose platform.

Freestanding Helical Nanostructured Chiro-Photonic Crystal Film and Anticounterfeiting Label Enabled by a Cholesterol-Grafted Light-Driven Molecular Motor.

Design and fabrication of freestanding chiro-photonic crystal film with the ability to change color over the whole visible light spectrum is appealing for anticounterfeiting technology and smart labels. Utilizing a newly synthesized light-responsive molecular motor functionalized with cholesterol (chol-MM) on the rotor, novel light-controlled photonic crystal is prepared by doping the novel chol-MM into liquid crystals (LCs). Thanks to the liquid crystalline cholesterol substituent, the chol-MM can be triggered by visible light (420nm). At the same time, the miscibility of chol-MM in LC matrix is significantly enhanced. Integrating the chol-MM with thermochromic hydrogen-bonded LC matrix, thermal and light dual-responsive cholesteric LC (CLC) material is prepared, in which the nanoscale helical pitch is tunable by photo-induced molecular motions of chol-MM. More importantly, utilizing UV-initiated polymerization of the visible light-modulated CLC material, structural colored photonic crystal films with arbitrary colorful patterns are fabricated. Such freestanding helical nanostructured labels have potential in the application of encrypted communication and anticounterfeiting.

Phototriggered Complex Motion by Programmable Construction of Light-Driven Molecular Motors in Liquid Crystal Networks.

Recent developments in artificial molecular machines have enabled precisely controlled molecular motion, which allows several distinct mechanical operations at the nanoscale. However, harnessing and amplifying molecular motion along multiple length scales to induce macroscopic motion are still major challenges and comprise an important next step toward future actuators and soft robotics. The key to addressing this challenge relies on effective integration of synthetic molecular machines in a hierarchically aligned structure so numerous individual molecular motions can be collected in a cooperative way and amplified to higher length scales and eventually lead to macroscopic motion. Here, we report the complex motion of liquid crystal networks embedded with molecular motors triggered by single-wavelength illumination. By design, both racemic and enantiomerically pure molecular motors are programmably integrated into liquid crystal networks with a defined orientation. The motors have multiple functions acting as cross-linkers, actuators, and chiral dopants inside the network. The collective rotary motion of motors resulted in multiple types of motion of the polymeric film, including bending, wavy motion, fast unidirectional movement on surfaces, and synchronized helical motion with different handedness, paving the way for the future design of responsive materials with enhanced complex functions.

Design and Nonadiabatic Photoisomerization Dynamics Study of a Three-Stroke Light-Driven Molecular Rotary Motor.

Working cycle of conventional light-driven molecular rotary motors (LDMRMs), especially Feringa-type motors, usually have four steps, two photoisomerization steps, and two thermal helix inversion (THI) steps. THI steps hinder the ability of the motor to operate at lower temperatures and limit the rotation speed of LDMRMs. A three-stroke LDMRM, 2-(2,7-dimethyl-2,3-dihydro-1H-inden-1-ylidene)-1,2-dihydro-3H-pyrrol-3-one (DDIY), is proposed, which is capable of completing an unidirectional rotation by two photoisomerization steps and one thermal helix inversion step at room temperature. On the basis of trajectory surface-hopping simulation at the semi-empirical OM2/MRCI level, the EP→ZP and ZP→EM nonadiabatic photoisomerization dynamics of DDIY were systematically analyzed. Quantum yields of EP→ZP and ZP→EM photoisomerization of DDIY are ca. 34% and 18%, respectively. Both EP→ZP and ZP→EM photoisomerization processes occur on an ultrafast time scale (ca. 100–300 fs). This three-stroke LDMRM may stimulate further research for the development of new families of more efficient LDMRMs.

Frontispiece: Visible Light‐Driven Molecular Switches and Motors: Recent Developments and Applications

Visible Light-Driven Molecular Switches and Motors have achieved remarkable advancement and found wide applications in bioscience, materials science, photopharmacology, and beyond. For more information, see the Review by Li et al. (DOI: 10.1002/chem.202103906)

Visible Light-Driven Molecular Switches and Motors: Recent Developments and Applications.

Inspired by human vision, a diverse range of light-driven molecular switches and motors have been developed for fundamental understanding and application in material science and biology. Recently, the design and synthesis of visible light-driven molecular switches and motors have been actively pursued. This emerging trend is partly motivated to avoid the harmful effects of ultraviolet light, which was necessary to drive the classical molecular switches and motors at least in one direction, impeding their employment in biomedical and photopharmacology applications. Moreover, visible light-driven molecular switches and motors are demonstrated to enable benign optical materials for advanced photonic devices. Therefore, during the past several years, visible light-driven molecular switches based on azobenzene derivatives, diarylethenes, 1,2-dicyanodithienylethenes, hemithioindigo derivatives, iminothioindoxyls, donor-acceptor Stenhouse adducts, and overcrowded alkene based molecular motors have been judiciously designed, synthesized, and used in the development of functional materials and systems for a wide range of applications. In this Review, we present the recent developments toward the design of visible light-driven molecular switches and motors, with their applications in the fabrication of functional materials and systems in material science, bioscience, pharmacology, etc. The visible light-driven molecular switches and motors realized so far undoubtedly widen the scope of these interesting compounds for technological and biological applications. We hope this Review article could provide additional impetus and inspire further research interests for future exploration of visible light-driven advanced materials, systems, and devices.

Light-driven molecular motors embedded in covalent organic frameworks.

The incorporation of molecular machines into the backbone of porous framework structures will facilitate nano actuation, enhanced molecular transport, and other out-of-equilibrium host–guest phenomena in well-defined 3D solid materials. In this work, we detail the synthesis of a diamine-based light-driven molecular motor and its incorporation into a series of imine-based polymers and covalent organic frameworks (COF). We study structural and dynamic properties of the molecular building blocks and derived self-assembled solids with a series of spectroscopic, diffraction, and theoretical methods. Using an acid-catalyzed synthesis approach, we are able to obtain the first crystalline 2D COF with stacked hexagonal layers that contains 20 mol% molecular motors. The COF features a specific pore volume and surface area of up to 0.45 cm3 g−1 and 604 m2 g−1, respectively. Given the molecular structure and bulkiness of the diamine motor, we study the supramolecular assembly of the COF layers and detail stacking disorders between adjacent layers. We finally probe the motor dynamics with in situ spectroscopic techniques revealing current limitations in the analysis of these new materials and derive important analysis and design criteria as well as synthetic access to new generations of motorized porous framework materials.

Controlling rotary motion of molecular motors based on oxindole.

Molecular motors are essential components of artificial molecular machines, which can be used to manipulate and amplify mechanical motion at the nanoscale to create machine-like function. Since the discovery of light-driven rotary molecular motors, the field has been widely developed, including the introduction of molecular motors based on oxindole by our group in 2019. The rotational properties of molecular motors, e.g. absorption wavelength, quantum yield and rotation speed, often critically depend on substituent effects. Up to now, the substituent effects of oxindole-based molecular motors have not yet been investigated. Herein, we present a family of oxindole-based molecular motors functionalised at three different positions on the motor core, with either CN or OMe groups. The motors prepared in this work retain the favourable features of oxindole-based motors, i.e. simple synthesis and visible light addressability. We find that functionalisation has substantial effects on the absorption wavelength of the motors, meanwhile the rotation speed is unaffected. Furthermore, we found that functionalisation of the oxindole molecular motors increases their quantum efficiency considerably in comparison to previous motors of their class.