Laser-driven Inertial Confinement Fusion Research Articles

Role of nonlocal heat transport on the laser ablative Rayleigh-Taylor instability

Abstract Ablative Rayleigh–Taylor instability (ARTI) and nonlocal heat transport are the critical problems in laser-driven inertial confinement fusion, while their coupling with each other is not completely understood yet. Here the ARTI in the presence of nonlocal heat transport is studied self-consistently for the first time theoretically and by using radiation hydrodynamic simulations. It is found that the nonlocal heat flux generated by the hot electron transport tends to attenuate the growth of instability, especially for short wavelength perturbations. A linear theory of the ARTI coupled with the nonlocal heat flux is developed, and a prominent stabilization of the ablation front via the nonlocal heat flux is found, in good agreement with numerical simulations. This effect becomes more significant as the laser intensity increases. Our results should have important references for the target designing for inertial confinement fusion.

A GPU based 3D raytracing algorithm for DUED laser fusion code

Abstract These days, graphical processing units (GPUs) deliver performance
comparable to that of hundreds of CPU cores. This level of performance allows
certain classes of simulations to be run in-house on a standard consumer workstation,
eliminating the need for a cluster. In this paper, it is shown that medium-resolution,
2D radiation hydrodynamics simulations for laser-driven inertial confinement fusion
with realistic 3D laser raytracing can now be conducted on a single consumer device.
A novel raytracing module has indeed been developed for the 2D Lagrangian radiation-
hydro-nuclear code DUED to leverage the computational power of GPUs. By
employing 3D raytracing, more realistic investigations of laser-driven plasmas become
feasible, with a particular focus on perturbations resulting from non-uniform laser
irradiation.

Damage growth characteristics on the exit surface of fused silica by the low-temporal coherence light irradiation.

The growth of fused silica surface damage poses a high risk in operating high-power laser devices, with complex physical mechanisms related not only to the wavelength, pulse width, fluence of incident pulse lasers, but also to initial damage size and material properties. With low-temporal coherence light (LTCL) increasingly applied in high-power laser-driven inertial confinement fusion (ICF), LTCL-induced damage growth has become a bottleneck limiting output power improvements. This paper analyzes LTCL damage growth characteristics and mechanisms on fused silica surfaces, obtaining its damage growth coefficient and threshold. By analyzing chemical composition variation, electric field of initial damage, and comparing the damage growth threshold of artificial initial damage, the mechanism of surface damage growth is investigated. This research provides reliable information for estimating fused silica lifetime in high-power LTCL devices and contributes to understanding LTCL properties.

Direct multiple monochromatic x-ray imaging with a pinhole array and a laterally graded multilayer mirror.

Multiple monochromatic x-ray imaging (MMI) is a technique for diagnosing the emission spectra of tracer elements in laser-driven inertial confinement fusion experiments. This study proposes an MMI method that combines a simple pinhole array with a laterally graded multilayer mirror. The method directly obtains multiple monochromatic x-ray images by regulating the multilayer thickness in different mirror positions to compensate for the energy-broadening effect. This paper presents a comprehensive design scheme, the multilayer fabrication and experimental verification of the gradient MMI imaging performance. The experimental results show that the method achieves monochromatic imaging with a spectral resolution of ∼70-90eV in several keV energy regions. This paper presents a practical diagnostic approach for directly and synchronously capturing the spatial, temporal, and spectral information of laser plasma x rays.

Minimum Condition Requirements in Laser Driven ICF for Advanced Space Propulsion Applications

Inertial Confinement Fusion (ICF) is one of the candidate methods by which spacecraft can be propelled onto interplanetary and interstellar trajectories. In this paper we discuss the application of laser driven ICF to advanced space propulsion and present fundamental equations which relate the capsule mass and nozzle jet efficiency to propulsion parameters. This is also shown for the scenario of using expellant propellant for the purpose of thrust augmentation. Keywords: Inertial Confinement Fusion, Space Propulsion

Theoretical and experimental study on spatial characteristics of a large imaging area streak camera developed for ICF precise diagnostics

The Modulation Transfer Function (MTF) offers an objective measure to assess the imaging performance of streak cameras. This study aims to enhance the diagnostic precision of streak camera used in laser-driven inertial confinement fusion research. We introduce a novel method for evaluating the MTF of a recently developed large imaging area streak tube. This method integrates the electron optical MTF theory and the production of a reticle plate-type photocathode. Using ultraviolet and femtosecond lasers, we established two calibration platforms for the streak camera in both static and dynamic modes. We measured the radius of the electrons reaching fluorescent screen and obtained MTFs. Our findings reveal that the ultimate spatial resolutions at off-axis distances of 1.2, 4.7, 8.2, and 11.7mm are 28.5, 27.2, 26.4, 24.9 lp/mm (static) and 25.0, 22.8, 23.0, 21.2 lp/mm (dynamic). Notably, we successfully charted the ultimate spatial resolution distributions across the streak camera's full imaging area in both modes.

Impact of flow-induced beam deflection on beam propagation in ignition scale hohlraums

Experiments examining the amount of specular reflection (or “glint”) within hohlraums containing different gas fill densities have recently been performed. Simulations of these experiments are presented that show using a single flux limiter cannot explain the decrease in glinted power with increasing gas fill density. The hypothesis that flow-induced beam deflection alters laser absorption is presented. A model is proposed that can be implemented into a ray tracing description of the laser commonly used in radiation hydrodynamic codes. It is shown that simulations using this model capture the trend with gas fill density improving agreement with measurements. This formulation is then applied to an ensemble of laser-driven inertial confinement fusion experiments performed at the National Ignition Facility. The proposed model shows little impact on the total x-ray drive on the capsule but a large impact on the resulting implosion symmetry.

Effect of hot-electron preheating on the multimode bubble-front growth of the ablative Rayleigh–Taylor instability

Hot electrons (HEs) generated via parametric instabilities at high laser intensities are a critical concern of laser-driven inertial confinement fusion (ICF), which can significantly impact the ICF performance by preheating the target. In this paper, the effects of HE preheating with moderate HE energy on the evolution of two-dimensional multimode ablative Rayleigh–Taylor instability (ARTI) up to the self-similar growth stage are studied through numerical simulations with a multigroup diffusion model. It is found that HE preheating stabilizes the linear growth of multimode ARTI and delays the onset of the self-similar growth regime. This time delay is more significant for the short-wavelength mode ARTI and higher energy HE cases. It is also shown that the variation of self-similar growth coefficients under HE preheating is not very significant. The delay to the onset of the nonlinear stage of multimode ARTI by HE preheating with moderate energy may be beneficial to ICF implosions.

Hybrid optimization of laser-driven fusion targets and laser profiles

Quasi-isentropic compression is an effective method to achieve high-density and high-temperature implosion in laser-driven inertial confinement fusion (ICF). However, it requires precise matching between the laser profile and the target structure. Designing the optimal laser profile and the corresponding target for ICF is a challenge due to the large number of parameters involved. In this paper, we present a novel method that combines random walk and Bayesian optimization. The basic sampling data for Bayesian optimization are a series of laser pulse profiles and target structures that can produce relatively high areal densities obtained by the random walk method. This approach reduces the number of samples required for Bayesian optimization and mitigates low efficiency in the latter stages of the random walk method. The method also reduces the randomness in the optimization process and enhances the optimization efficiency. It should have important applications in ICF research.

Research into CUP-VISAR velocity reconstruction based on weighted DRUNet and total variation joint optimization.

This Letter proposes a CUP-VISAR data reconstruction algorithm for laser-driven inertial confinement fusion (ICF) research. The algorithm combines weighted deep residual U-Net (DRUNet) and joint optimization with total variation (TV) to improve shockwave velocity fringe image reconstruction. The simulation results demonstrate that the proposed algorithm outperforms the ADMM-TV and enhanced 3D total variation (E-3DTV) algorithms, enhancing the quality of the reconstructed images and thereby improving the accuracy of velocity field calculations. Furthermore, it addresses the challenges of the high compression ratio caused by the diagnostic requirements of the larger number of sampling frames in the CUP-VISAR system and the issues of aliasing within a large encoding aperture. The proposed algorithm demonstrates good robustness to noise, ensuring reliable reconstruction even under Gaussian noise with a relative intensity of 0.05. This algorithm contributes to ICF diagnostics in complex environmental conditions and has theoretical significance and practical application value for achieving controlled thermonuclear fusion.

Proof-of-Principle Experiment on the Dynamic Shell Formation for Inertial Confinement Fusion.

In the dynamic-shell (DS) concept [V. N. Goncharov et al., Novel Hot-Spot Ignition Designs for Inertial Confinement Fusion with Liquid-Deuterium-Tritium Spheres, Phys. Rev. Lett. 125, 065001 (2020).PRLTAO0031-900710.1103/PhysRevLett.125.065001] for laser-driven inertial confinement fusion the deuterium-tritium fuel is initially in the form of a homogeneous liquid inside a wetted-foam spherical shell. This fuel is ignited using a conventional implosion, which is preceded by a initial compression of the fuel followed by its expansion and dynamic formation of a high-density fuel shell with a low-density interior. This Letter reports on a scaled-down, proof-of-principle experiment on the OMEGA laser demonstrating, for the first time, the feasibility of DS formation. A shell is formed by convergent shocks launched by laser pulses at the edge of a plasma sphere, with the plasma itself formed as a result of laser-driven compression and relaxation of a surrogate plastic-foam ball target. Three x-ray diagnostics, namely, 1D spatially resolved self-emission streaked imaging, 2D self-emission framed imaging, and backlighting radiography, have shown good agreement with the predicted evolution of the DS and its stability to low Legendre mode perturbations introduced by laser irradiation and target asymmetries.

Suppression of stimulated Raman scattering by angularly incoherent light, towards a laser system of incoherence in all dimensions of time, space, and angle

Laser–plasma instability (LPI) is one of the main obstacles to achieving predictable and reproducible fusion at high gain through laser-driven inertial confinement fusion (ICF). In this paper, for the first time, we show analytically and confirm with three-dimensional particle-in-cell simulations that angular incoherence provides suppression of the instability growth rate that is additional to and much stronger than that provided by the well-known temporal and spatial incoherence usually used in ICF studies. For the model used in our calculations, the maximum field ratio between the stimulated Raman scattering and the driving pulses drops from 0.2 for a Laguerre–Gaussian pulse with a single nonzero topological charge to 0.05 for a super light spring with an angular momentum spread and random relative phases. In particular, angular incoherence does not introduce extra undesirable hot electrons. This provides a novel method for suppressing LPI by using light with an angular momentum spread and paves the way towards a low-LPI laser system for inertial fusion energy with a super light spring of incoherence in all dimensions of time, space, and angle, and may open the door to the use of longer-wavelength lasers for inertial fusion energy.

Modeling of a spatially resolved ion temperature diagnostic for inertial confinement fusion

The performance of modern laser-driven inertial confinement fusion (ICF) experiments is degraded by contamination of the deuterium–tritium (DT) fuel with high-Z material during compression. Simulations suggest that this mix can be described by the ion temperature distribution of the implosion, given that such contaminants deviate in temperature from the surrounding DT plasma. However, existing neutron time-of-flight (nTOF) diagnostics only measure the spatially integrated ion temperature. This paper describes the techniques and forward modeling used to develop a novel diagnostic imaging system to measure the spatially resolved ion temperature of an ICF implosion for the first time. The technique combines methods in neutron imaging and nTOF diagnostics to measure the ion temperature along one spatial dimension at yields currently achievable on the OMEGA laser. A detailed forward model of the source and imaging system was developed to guide instrument design. The model leverages neutron imaging reconstruction algorithms, radiation hydrodynamics and Monte Carlo simulations, optical ray tracing, and more. The results of the forward model agree with the data collected on OMEGA using the completed diagnostic. The analysis of the experimental data is still ongoing and will be discussed in a separate publication.

Role of hot electrons in mitigating ablative Rayleigh–Taylor instability

In laser-driven inertial confinement fusion (ICF) specifically with high laser intensities, energetic (hot) electrons (HEs) can be generated via laser-plasma instabilities. HEs can significantly impact the target performance by modifying the implosion hydrodynamics. In this paper, the effects of moderate-energy (about 20 to 40 keV) HEs on the evolution of two-dimensional single-mode ablative Rayleigh–Taylor instability (ARTI) are studied through numerical simulations with a multigroup diffusion model in which the HE population is treated as a high-energy group launched from the boundary. With HEs present, it is found that ARTI linear growth rates are reduced even though the acceleration of the implosion shell is enhanced by HEs. The reduction in the linear growth rate is owing to the increase in the ablation velocity and the density scale length, and this stabilization effect is greater in the shorter-wavelength modes and/or higher-energy HE cases. The ARTI linear growth does not get mitigated monotonically as the HE number density increases for a given fixed HE kinetic energy. The HE number density minimizing the ARTI growth rate is found, likely due to the competition of the stabilizing and destabilizing hydrodynamic-parameter variations caused by HEs.

1D/2D benchmark experiments of aluminum alloy irradiated by 14 MeV neutrons for ICF facilities

Aluminum alloy (5083) is one of the most important structural materials used in laser-driven Inertial Confinement Fusion (ICF) facilities, which will be exposed to high-yield 14 MeV neutrons and highly activated after the DT explosion. Reliable estimation of shutdown dose rate levels is of great importance for machine operation planning and to ensure the safety of people entering into target bay. Both 1D and 2D benchmark experiments were performed on a DT neutron accelerator at the Institute of Nuclear Physics and Chemistry (INPC) to validate the calculation codes and cross section libraries (JMCT with FENDL-3.1d and FISPACT with EAF-2007) used in the simulations of neutron transport and activation for aluminum alloy 5083. The total neutron yield was about 6 × 1014 in the experiments. Both radioactivity of foils placed inside the assembly and air kerma rate at given positions out of the assembly have been measured in 1D/2D experiments. Monte-Carlo code JMCT with FENDL-3.1d was used in both neutron and gamma-ray transport, and the inventory code FISPACT with EAF-2007 was used to calculate neutron activation. Results show that the relative error for air kerma rate in simulations and experiments is less than 20%, and radioisotopes give different contribution ratios on dose levels for 1D/2D experimental assemblies after DT neutron irradiation, especially for 24Na, 27Mg and 56Mn at the time within 16 h after neutron irradiated. Besides, simulations of radioactivity give good agreement with experimental results obtained for radioisotopes 24Na, 196Au, 57Ni and 58Co in both 1D and 2D experiments, and the relative error is less than ±16%.

Imaging velocity interferometer system for any reflector (VISAR) diagnostics for high energy density sciences.

Two variants of optical imaging velocimetry, specifically the one-dimensional streaked line-imaging and the two-dimensional time-resolved area-imaging versions of the Velocity Interferometer System for Any Reflector (VISAR), have become important diagnostics in high energy density sciences, including inertial confinement fusion and dynamic compression of condensed matter. Here, we give a brief review of the historical development of these techniques, then describe the current implementations at major high energy density (HED) facilities worldwide, including the OMEGA Laser Facility and the National Ignition Facility. We illustrate the versatility and power of these techniques by reviewing diverse applications of imaging VISARs for gas-gun and laser-driven dynamic compression experiments for materials science, shock physics, condensed matter physics, chemical physics, plasma physics, planetary science and astronomy, as well as a broad range of HED experiments and laser-driven inertial confinement fusion research.

Instrument design for an inertial confinement fusion ion temperature imager.

A mix of contaminant mass is a known, performance-limiting factor for laser-driven inertial confinement fusion (ICF). It has also recently been shown that the contaminant mass is not necessarily in thermal equilibrium with the deuterium-tritium plasma [B. M. Haines etal., Nat. Commun. 11, 544 (2020)]. Contaminant mass temperature is one of the dominant uncertainties in contaminant mass estimates. The MixIT diagnostic is a new and potentially transformative diagnostic, capable of spatially resolving ion temperature. The approach combines principles of neutron time-of-flight and neutron imaging diagnostics. The information from the MixIT diagnostic can be used to optimize ICF target and laser drive designs as well as provide key constraints on ICF radiation-hydrodynamic simulations that are critical to contaminant mass estimates. This work details the design and optimization of the major components of the MixIT diagnostic: the neutron aperture, the neutron detector (scintillator), and the recording system.

Instability seeding mechanisms due to internal defects in inertial confinement fusion targets

Performance degradation in laser-driven inertial confinement fusion (ICF) implosions is caused by several effects, one of which is Rayleigh–Taylor instability growth. Defects in ICF targets, such as internal voids and surface roughness, create instability seeds in the shell as shocks propagate through the target. A comprehensive understanding of seeding mechanisms is essential to characterize the impact of target defects on inflight shell integrity and mass injection into the central, lower-density vapor region. An analysis of early-time behavior of both single-mode shell mass modulations and isolated voids is performed by examining the evolution of the acoustic waves launched by these target imperfections. A systematic study of localized perturbation growth as a function of defect placement and size is presented. The use of low-density ablator materials (such as foams) is suggested as a potential mitigation strategy to improve target robustness against the impact of defect-initiated growth.

Collisionless Shocks, Implicit Moments, and Laser Fusion Implosions

In 2020, the author was awarded the Charles K. Birdsall Award for the contributions performed in his studies of Computational Nuclear and Plasma Sciences. This article collects work performed during his long career in plasma modeling starting as early as 1962. In that year, he worked during the summer at The Aerospace Corporation, El Segundo, CA, USA, and in 1964, he completed his Ph.D. at Cornell University, Ithaca, NY, USA. In 1965, the author studied under a Fulbright Grant in Garching, Germany. Then, from 1965–1967, he was an Assistant Professor and a Ford Postdoctoral Fellow at MIT, Cambridge, MA, USA. From 1967 to 1972, the author was a researcher at Bell Laboratories, Whippany, NJ, USA. From 1972 to 2006, the author performed plasma physics modeling at the Los Alamos National Laboratory, Los Alamos, NM, USA. Thereafter, until 2017, the author pursued plasma studies at his Research Applications Corporation (RAC), White Rock, NM, USA. This article will review the author’s studies of laser-driven Inertial Confinement Fusion, development and use of the Implicit Moment Method of plasma simulation, Modeling of Plasma Opening Switches, and improved shock viscosity.

Density evolution after shock release from laser-driven polystyrene (CH) targets in inertial confinement fusion

The evolution of the plasma density in the rarefaction wave formed after a laser-driven shock is released from a CH foil was measured using optical interferometry. It was found that the plasma density profile is very sensitive to the conditions at the back surface of the foil before the shock release. Dedicated experiments demonstrated that radiation preheat by coronal x rays caused early expansion of the back surface and faster expansion of the rarefaction wave. Radiation-hydrodynamics simulations with accurate modeling of radiation preheat from the plasma corona are in good agreement with the experimental results. The early expansion of material interfaces due to coronal x-ray preheat must be evaluated in designing and interpreting laser-driven inertial confinement fusion experiments.