Isoelectric Membranes Research Articles

Isoelectric trapping and discrimination of histones from plasma in a microfluidic device using dehydrated isoelectric gate.

Histones are basic proteins with an isoelectric point around 11. It has been shown that the level of plasma circulating histones increases significantly during sepsis, and circulating free histones are associated with sepsis severity and mortality. It was found that the median plasma total free histone concentration of sepsis ICU non-survivors is higher compared to survivors. Therefore, histone concentration can serve as a prognostic indicator and there is a need for a simple, low-cost, and rapid method for measuring histone levels. In this work, we have developed a microfluidic device containing an isoelectric membrane made of dehydrated agarose gel of a specific pH embedded in a porous membrane for isoelectric trapping of histones rapidly. Although isoelectric gates have been used for trapping proteins before, they have to be introduced at the time of the experiment. Here, we show that isoelectric gates formed by gels loaded in a scaffold can be integrated directly into the fabrication process flow, dehydrated for storage, and rehydrated during the experiment and still function effectively to achieve isoelectric trapping. A low-cost and rapid microfabrication technique, xurography, was used for agarose integration and device fabrication. The integrated device was tested with samples containing buffered histone, histone in the presence of high-concentration bovine serum albumin (BSA), and histone spiked in blood plasma. The results show that the device can be used to distinguish between survivors and non-survivors of sepsis in less than 10min, making it suitable as a point-of-care device for sepsis prognosis.

Highly efficient proteome analysis with combination of protein pre‐fractionation by preparative microscale solution isoelectric focusing and identification by μRPLC‐MS/MS with serially coupled long microcolumn

To improve the efficiency of proteome analysis, a strategy with the combination of protein pre-fractionation by preparative microscale solution isoelectric focusing, peptide separation by μRPLC with serially coupled long microcolumn and protein identification by ESI-MS/MS was proposed. By preparative microscale solution isoelectric focusing technique, proteins extracted from whole cell lysates of Escherichia coli were fractionated into five chambers divided by isoelectric membranes, respectively with pH range from 3.0 to 4.6, 4.6 to 5.4, 5.4 to 6.2, 6.2 to 7.0 and 7.0 to 10.0. Compared to the traditional on-gel IFF, the protein recovery could be obviously improved to over 95%. Subsequently, the enriched and fractionated proteins in each chamber were digested, and further separated by a 30-cm long serially coupled RP microcolumn. Through the detection by ESI-MS/MS, about 200 proteins were identified in each fraction, and in total 835 proteins were identified even with one-dimensional μRPLC-MS/MS system. All these results demonstrate that by such a combination strategy, highly efficient proteome analysis could be achieved, not only due to the in-solution protein enrichment and pre-fractionation with improved protein recovery but also owing to the increased separation capacity of serially coupled long μRPLC columns.

Quasi-isoelectric buffers for protein analysis in a fast alternative to conventional capillary zone electrophoresis☆

Two different approaches are here reported for obtaining ultra-narrow pI cuts from 2-pH unit wide carrier ampholyte ranges, as commercially available, for use as quasi-isoelectric buffers in capillary electrophoresis separations of proteins. One of them uses multicompartment electrolyzers endowed with isoelectric membranes (Immobiline technology); the other employs the Rotofor equipment. Although the first approach results in more precise pI cuts, the latter technique is much faster, easier to handle and permits the immediate collection of 20 fractions in a single run. This results in ultra-narrow, ca. 0.1-pH unit intervals, uniformly spaced apart along the original wider gradient utilized for the fractionation. It is here shown that such quasi-isoelectric buffers, especially those in the pH 8-9 interval, have the unique property of coating the silica wall, thus preventing interaction of the proteins with the silica surface, that would otherwise totally disrupt the separation. On the contrary, such a shielding is not obtained in control, non isoelectric buffers (such as phosphate), that give very poor separations in uncoated capillaries. It is hypothesized that such a unique shielding effect is due to the oligo-amino backbone of the carrier ampholytes, typically composed (in the Vesterberg's synthetic approach) of 4-6 nitrogens spaced apart by ethylene moieties. Although such oligoprotic buffers should bear, in the isoelectric state, just one positive and one negative charge, they might be transiently ionized upon contact with the silanols, thus inducing a cooperative binding to the silica wall.

Solution Isoelectric Focusing for Peptide Analysis: Comparative Investigation of an Insoluble Nuclear Protein Fraction

In this study, a solution isoelectric focusing apparatus was modified and built into a two-dimensional separation method for peptides. Newly commercialized isoelectric membranes, which carry immobilized ampholytes, were integrated to establish the pH boundaries in this apparatus. High-performance liquid chromatography was employed as the second dimension, interfaced with mass spectrometry. An insoluble nuclear protein fraction was used to evaluate and optimize this method. This two-dimensional separation method dramatically improves peptide detection and identification compared with a single dimension LC-MS analysis. Off-line reversed-phase HPLC was used to ascertain reproducibility. The two-dimensional separation method was combined with (18)O labeling for comparative analysis of protein expression in two cell lines. Separation of peptides by solution isoelectric focusing (sIEF) offers the advantage that it can be accomplished after the (18)O labels are introduced. The labeled peptides can be mixed with unlabeled ones before fractionation by sIEF. The relative abundances of nuclear proteins from a drug resistant MCF-7 cancer cell line were compared to those from the drug susceptible parent cell line using this combined strategy. The abundances of several heterogeneous nuclear ribonucleoproteins were found to be increased in the mitoxantrone-resistant line.

How to Bring the “Unseen” Proteome to the Limelight via Electrophoretic Pre-Fractionation Techniques

The present review reports a panoply of electrophoretic methods as pre-fractionation tools in proteomic investigations in preparation for mass spectrometry or two-dimensional electrophoresis map analysis. Such electrophoretic pre-fractionation protocols include all those electrokinetic methodologies which are performed in free solution, most of them relying on isoelectric focusing steps (although some approaches based on gels and granulated media are also discussed). Devices associated with electrophoretic separations are multi-chamber apparatuses, such as the multi-compartment electrolyzers equipped with either isoelectric membranes or with isoelectric beads, Off-Gel electrophoresis in a multi-cup device and the Rotofor, an instrument also based on a multi-chamber system but exploiting the conventional technique of carrier-ampholyte-focusing. Other free-flow systems, as well as miniaturized chambers, are also described.

Isoelectric beads for proteome pre‐fractionation. II: Experimental evaluation in a multicompartment electrolyzer

Proteome pre-fractionation in multicompartment electrolyzers is proposed here, with substantial modifications as compared to the standard technique. First of all, the classical isoelectric, buffering membranes, delimiting each compartment and acting, in pairs, as isoelectric traps, have been replaced by isoelectric buffering beads, operating on the same principle, but allowing unhindered migration of proteins (lack of sieving properties, contrary to typical continuous membrane barriers). Secondly, the isoelectric beads are not made in the conventional manner, with ionic acrylamide derivative monomers throughout their central core, but are composed of a hard, ceramic core, coated with an amphoteric buffering polymer. This minimizes mass transfer resistance of proteins that are transiently adsorbed onto the beads. As a result, significantly reduced separation times, of the order of ca. 3 h, are required for developing steady-state patterns, as compared to the lengthy times (overnight and much longer) in conventional multicompartment electrolyzers operating with isoelectric membranes. Examples of separation of standard marker proteins, as well as entire Escherichia coli lysates and human serum proteins, are given. The obtained fractions are analyzed by sodium dodecyl sulfate polyacrylamide gel electrophoresis, two-dimensional gel electrophoresis and by surface enhanced laser desorption/ionization mass spectrometry.

Prefractionation techniques in proteome analysis: The mining tools of the third millennium

The present review deals with prefractionation protocols used in proteomic investigation in preparation for mass spectrometry (MS) or two-dimensional electrophoresis (2-DE) map analysis. Briefly, reported methods focus on cell organelle differential centrifugation and on chromatographic approaches, to continue in extenso with a panoply of electrophoretic methods. In the case of chromatography, procedures useful as a prefractionation step, including affinity, ion-exchange, and reversed-phase resins, revealed several hundreds of new species, previously undetected in unfractionated samples. Novel chromatographic prefractionation methods are also discussed such as a multistaged fractionation column, consisting in a set of immobilized chemistries, serially connected in a stack format (an assembly of seven blocks), each capable of harvesting a given protein population. Such a method significantly simplifies the complexity of treated samples while concentrating species, all resulting in a larger number of visible proteins by MS or 2-DE. Electrophoretic prefractionation protocols include all those electrokinetic methodologies which are performed in free solution, essentially all relying on isoelectric focusing steps (although some approaches based on gels and granulated media are also discussed). Devices associated with electrophoretic separation are multichamber apparatus, such as the multicompartment electrolyzers equipped with either isoelectric membranes or with isoelectric beads. Multicup device electrophoresis and several others, exploiting the conventional technique of carrier ampholyte focusing, are reviewed. This review also reports approaches for sample treatments in order to detect low-abundance species. Among others, a special emphasis is made on the reduction of concentration difference between proteins constituting a sample. This latter consists in a library of combinatorial ligands coupled to small beads. Such a library comprises hexameric ligands composed of 20 amino acids, resulting in millions of different structures. When these beads are impregnated with complex proteomes (e.g., human sera) of widely differing protein compositions, they are able to significantly reduce the concentration differences, thus greatly enhancing the possibility to evidence low-abundance species. It is felt that this panoply of methods could offer a strong step forward in "mining below the tip of the iceberg" for detecting the "unseen proteome".

Preparative-scale fractionation by isoelectric trapping under nondenaturing conditions: Separation of egg white protein isoforms on a modified Gradiflow unit

pH-biased isoelectric trapping was used to separate proteins from egg white at the preparative level (80 mg), into discrete protein fractions based on isoelectric point. The problems of isoelectric precipitation that are common for the separation of complex protein mixtures under isoelectric conditions were mitigated by using single-component isoelectric buffers within the sample separation compartments. This combined with the mild process conditions of the Gradiflow unit that was modified for binary isoelectric trapping separations, ensured that biological activity was maintained. This was verified by measurement of the trypsin protease inhibitory activity of the extract and separated fractions. Furthermore, the high resolving power of this system under preparative conditions was demonstrated by separation of three protein isoforms using isoelectric membranes with differences of 0.025 pH units from each other.

High‐buffering capacity, hydrolytically stable, low‐pI isoelectric membranes for isoelectric trapping separations

Hydrolytically stable, low-pI isoelectric membranes have been synthesized from low-pI ampholytic components, poly(vinyl alcohol), and a bifunctional cross-linker, glycerol-1,3-diglycidyl ether. The low-pI ampholytic components used contain one amino group and at least two weakly acidic functional groups. The acidic functional groups are selected such that the pI value of the ampholytic component is determined by the pK(a) values of the acidic functional groups. When the concentration of the ampholytic component incorporated into the membrane is higher than a required minimum value, the pI of the membrane becomes independent of variations in the actual incorporation rate of the ampholytic compound. The new, low-pI isoelectric membranes have been successfully used as anodic membranes in isoelectric trapping separations with pH < 1.5 anolytes and replaced the hydrolytically less stable polyacrylamide-based isoelectric membranes. The new low-pI isoelectric membranes have excellent mechanical stability, low electric resistance, good buffering capacity, and long life time, even when used with as much as 50 W power and current densities as high as 33 mA/cm(2) during the isoelectric trapping separations.

Alkali-stable high-pI isoelectric membranes for isoelectric trapping separations.

Alkali-stable, high-pI isoelectric membranes have been synthesized from quaternary ammonium derivatives of cyclodextrins and poly(vinyl alcohol), and bifunctional cross-linkers, such as glycerol-1,3-diglycidyl ether. The new, high-pI isoelectric membranes were successfully applied as cathodic membranes in isoelectric trapping separations in place of the hydrolytically more labile, polyacrylamide-based cathodic isoelectric membranes, and permitted the use of catholytes as alkaline as 1 M NaOH. The new high-pI isoelectric membranes have shown excellent mechanical stability, low electric resistance and long life times, even when subjected to electrophoresis with current densities as high as 80 mA/cm2.

Narrow-band fractionation of proteins from whole cell lysates using isoelectric membrane focusing and nonporous reversed-phase separations.

Preparative isoelectric focusing (PIEF) is used to achieve narrow-band fractionation of proteins from whole cell lysates of Escherichia coli (E. coli). Isoelectric membranes create well-defined pH ranges that fractionate proteins by isoelectric point (pI) upon application of an electric potential. A commercial IsoPrime device (Amersham-Pharmacia BioTech) is modified for the PIEF separation to lessen run volumes significantly. Two-dimensional polyacrylamide gel electrophoresis (2-D PAGE) analysis of chamber contents indicates that excellent pH fractionation is achieved with little overlap between chambers. PIEF pH fractions are further separated using nonporous reversed-phase high-performance liquid chromatography (NPS-RP-HPLC) and HPLC eluent is analyzed on-line by electrospray ionization-time of flight-mass spectrometry (ESI-TOF-MS) for intact protein molecular weight (MW) analysis. The result is a pI versus MW map of bacterial protein content. IEF fractionation down to 0.1 pH units combined with intact protein MW values result in a highly reproducible map that can be used for comparative analysis of different E. coli strains.

Preparative-scale isoelectric trapping separations in methanol–water mixtures

The typically low aqueous solubilities of small, hydrophobic organic ampholytic molecules limit the production rates that can be achieved in their isoelectric trapping (IET) separations and call for the use of hydro-organic mixtures as solvents. The compatibility of methanol–water mixtures and poly(ethylene terephthalate) substrate-supported isoelectric polyacrylamide hydrogels, developed for binary IET separations in a Gradiflow BF200IET unit, was investigated. The isoelectric polyacrylamide-based hydrogels retained their functional and mechanical integrities when the methanol concentration in the hydro-organic solvent mixture was kept at or below 25% (v/v). The utility of the hydro-organic media was demonstrated in the purification of a hydrophobic ampholytic compound, technical grade 4-hydroxy-3-(morpholinomethyl) benzoic acid. Production rates as high as 7 mg/h were achieved using small, 15 cm 2 active surface area isoelectric membranes.

Separation of proteins in a multicompartment electrolyzer with chambers defined by a bed of gel beads.

Multicompartment electrolyzers (MEs) with isoelectric membranes were introduced in 1989 for purifying proteins in an electric field. At the basis of ME technology there are membranes consisting of cross-linked copolymers of acrylamide and acrylamido monomers bearing protolytic groups. The technology employed for casting the membranes is an extension of the isoelectric focusing in immobilized pH gradient technique for which specific acrylamido monomers, known with the trade name of Immobiline, have been developed. However, the use of continuous membranes presents several disadvantages. Due to the mechanical characteristics of polyacrylamide, the gel must physically adhere onto a rigid support, which prevents it from collapsing. The support must have a highly porous structure in order to be permeable to proteins. The mechanical fragility of the membranes is one of the main problems that hinders the industrial scale application of ME separators. In order to overcome this problem, we propose to substitute the continuous membranes with a bed of gel beads of identical comonomer composition, obtained by an inverse emulsion polymerization process.

Preparative-scale isoelectric trapping enantiomer separations

The new Gradiflow BF200 IET unit, developed for isoelectric trapping protein separations has been modified and used to carry out preparative-scale enantiomer separations. Hydroxypropyl β-cyclodextrin was used as the chiral resolving agent to induce an isoelectric point difference between the enantiomers. Three isoelectric membranes with isoelectric points below, in between and above the isoelectric points of the complexed enantiomers were used to trap the separated enantiomers in the anodic and cathodic separation compartments of the Gradiflow BF200 IET apparatus, respectively. The production rates were about 15 times higher than those previously obtained with another isoelectric trapping device and about 30% higher than those obtained in a continuous free-flow electrophoretic device operated in the isoelectric focusing mode. The remarkable separation speed observed in the modified Gradiflow BF200 IET unit is attributed to the favorable interplay of the short electrophoretic transfer distance, the high electric field strength and the large effective surface areas of the isoelectric membranes.

Preparative-scale isoelectric trapping separations using a modified Gradiflow unit.

The Gradiflow BF200 preparative electrophoretic unit (Gradipore), which has been developed for size-based and charge-sign-based protein separations and in which the hydraulic flow path of the recirculating sample stream in the separation cartridge is orthogonal to the electric field, has been modified to carry out binary protein separations using the principles of isoelectric trapping. The disposable separation cartridge contained three isoelectric membranes which, along with the cartridge holder, formed the anode and cathode compartments and the anodic and cathodic separation compartments. The utility of the modified instrument was demonstrated by effecting a binary separation of chicken egg white across an isoelectric point 5.5 isoelectric membrane. The desalting and subsequent binary separation steps proved to be remarkably rapid, due to the favorable combination of short electrophoretic path, high electric field strength and large effective isoelectric membrane surface area.

Fundamental aspects of chiral separations by capillary electrophoresis.

A review is presented that surveys the basic theory of direct separation of enantiomers by capillary electrophoretic (CE) techniques. These separations are based on the formation of diastereomeric complexes between the enantiomeric analytes and a chiral selector added to the electrolyte solution. The review covers a comprehensive treatment of the equations needed for optimization of selectivity coefficients, resolution and analysis time in the zone electrophoretic mode. In this context, it takes into account combined equilibria of complexation and protonation/deprotonation as well as complexation and paritition into micelles. On the basis of these equations, the benefits of charged selectors and the optimization potential inherent to pH tuning can be documented. In addition, the review deals with some basic aspects of chiral isoelectric focusing and briefly discusses indirect enantioseparation. In a subsequent section a survey is given on particularfeatures of the various types of chiral selectors. Finally, the recent developments in preparative enantioseparation in continuous free-flow system and by use of isoelectric membranes are discussed.

Stereoselective synthesis of ( S)-(+)-Naproxen catalyzed by carboxyl esterase in a multicompartment electrolyzer

The stereoselective hydrolysis of racemic 2-substituted propionates, catalyzed by carboxyl esterase, provides a cost-competitive route to produce the optically pure, anti-inflammatory drug Naproxen. In the present work, we describe the application of the multicompartment electrolyzer reactor (ME) for the stereoselective hydrolysis of a racemic Naproxen ester, ( R, S)-ethoxyethyl-[2-(6-methoxy-2-naphtyl)]propionate, catalyzed by a carboxyl esterase. The enzyme was trapped in a reactor chamber, delimited by two isoelectric membranes encompassing the p I value of the enzyme, together with the neutral substrate. After 90 min, a conversion of 45% was obtained with an enantiomeric excess of 84%. The reaction product, ( S)-(+)-Naproxen, was electrophoretically removed in continuous from the reaction chamber and collected in a contiguous, more acidic chamber, separated from the enzyme and from the unreacted substrate. Moreover, at the end of the reaction, it was possible to recover the enzyme from the reactor and use it again.

A turning point in proteome analysis: sample prefractionation via multicompartment electrolyzers with isoelectric membranes.

Sample prefractionation, as obtained via multicompartment electrolyzers with isoelectric membranes, greatly enhanced the load ability, resolution and detection sensitivity of two-dimensional (2-D) maps in proteome analysis. This was demonstrated with different samples. In an Escherichia coli total cell extract, analysis by a 2-D map run in a pH 4-5 gradient showed many more spots when prefractionated, as compared with standard maps available in databases such as SWISS-2DPAGE. Analysis of human plasma in the pH 3-6 range showed an increase in the number of highly acidic proteins in the fractionated sample compared to whole plasma. With both samples no protein precipitation or smears occurred and much larger sample amounts could be loaded upon prefractionation, so that a large number of spots could be visualized by Coomassie staining, which is fully compatible with subsequent matrix assisted laser desorption/ionization-time of flight (MALDI-TOF) analysis.

Crystallization of chicken liver (basic) fatty acid binding protein after purification in multicompartment electrolyzers with isoelectric membranes.

A preparation of chicken liver (basic) fatty acid binding protein was purified to homogeneity in multicompartment electrolyzers with isoelectric membranes. Large amounts of the isoelectric point (pI) 9.7 protein were collected into a compartment delimited by pI 8.8 and 11.0 membranes. The protein thus purified produced crystals which diffract to higher resolution than those obtained by purification via preparative isoelectric focusing (IEF) in soluble carrier ampholytes. In addition, a novel orthorhombic form with a different molecular packing was obtained. It is hypothesized that, when using conventional IEF, traces of carrier ampholytes could adhere to the protein, particularly in the hydrophobic ligand-binding pocket, rendering the interpretation of the electron density maps difficult. Multicompartment electrolyzers do not present this drawback, since they are based on insoluble buffering species.

High‐affinity LPS binding domain(s) in recombinant factor C of a horseshoe crab neutralizes LPS‐induced lethality

SSCrFCES is a biologically active, recombinant fragment of factor C, which is the endotoxin-sensitive serine protease of the LAL coagulation cascade. The approximately 38 kDa protein represents the LPS binding domain of factor C. A novel secretory signal directs the secretion of SSCrFCES into the culture supernatant of Drosophila cells, and hence it is readily purified. By differential ultrafiltration followed by preparative isoelectric membrane electrophoresis, SSCrFCES was purified as an isoelectrically homogeneous and stable monomeric protein. The ability of SSCrFCES to bind lipid A was analyzed using an ELISA-based assay as well as surface plasmon resonance. SSCrFCES exhibits high positive cooperativity of binding to two or three lipid A molecules, with a Hill's coefficient of 2.2. The 50% endotoxin-neutralizing concentration of SSCrFCES against 200 EU of endotoxin is approximately 0.069 microM, suggesting that SSCrFCES is an effective inhibitor of LAL coagulation cascade. Although partially attenuated by human serum, as little as 1 microM of SSCrFCES inhibits the LPS-induced secretion of hTNF-alpha and hIL-8 by THP-1 and human peripheral blood mononuclear cells with greater potency than polymyxin B. SSCrFCES is noncytotoxic, with a clearance rate of 4.7 ml/min. The L.D.(90) of SSCrFCES for LPS lethality is achieved at 2 microM. These results demonstrate the endotoxin-neutralizing capability of SSCrFCES in vitro and in vivo and its potential use for the treatment of endotoxin-induced septic shock.