Irradiated Disk Research Articles

Effect of the non-uniform solar chromospheric Lyα radiation on determining the coronal H I outflow velocity

We derived maps of the solar wind outflow velocity of coronal neutral hydrogen atoms at solar minimum in the altitude range 1.5–4.0 R⊙. We applied the Doppler dimming technique to coronagraphic observations in the UV H I Lyα line at 121.6 nm. The technique exploits the intensity reduction in the coronal line with increasing velocities of the outflowing plasma to determine the solar wind velocity by iterative modelling. The Lyα line intensity is sensitive to the wind outflow velocity and also depends on the physical properties of coronal particles and underlying chromospheric emission. Measurements of irradiance by the chromospheric Lyα radiation in the corona are required for a rigorous application of the Doppler dimming technique, but they are not provided by past and current instrumentations. A correlation function between the H I 121.6 nm and He II 30.4 nm line intensities was used to construct Carrington rotation maps of the non-uniform solar chromospheric Lyα radiation and thus to compute the Lyα line irradiance throughout the outer corona. Approximations concerning the temperature of the scattering H I atoms and exciting solar disc radiation were also adopted to significantly reduce the computational time and obtain a faster procedure for a quick-look data analysis of future coronagraphic observations. The effect of the chromospheric Lyα brightness distribution on the resulting H I outflow velocities was quantified. In particular, we found that the usual uniform-disc approximation systematically leads to an overestimated velocity in the polar and mid-latitude coronal regions up to a maximum of about 50−60 km s−1 closer to the Sun. This difference decreases at higher altitudes, where an increasingly larger chromospheric portion, including both brighter and darker disc features, contributes to illuminate the solar corona, and the non-uniform radiation condition progressively approaches the uniform-disc approximation.

Influence of the Disk Wind on the Intrinsic Polarization of Young Stars

The behavior of the linear polarization parameters of UX Ori stars during their eclipses by circumstellar dust clouds is studied. A circumstellar disk with a disk wind creating a puffing in the dust sublimation zone is considered. We show that the disk puffing can strongly affect the degree of polarization and color index of the star during its eclipse. A strong wind can change the orientation of the plane of linear polarization. The scattered radiation from a thin disk is polarized perpendicularly to its plane, but the radiation from a disk with a strong wind can be polarized along the disk plane. A situation where the disk-scattered radiation is not polarized in a certain spectral band is possible owing to the disk puffing. There can be different orientations of the linear polarization of the disk radiation in different spectral bands.

The first multidimensional view of mass loss from externally FUV irradiated protoplanetary discs

Computing the flow from externally FUV irradiated protoplanetary discs requires solving complicated and expensive photodissociation physics iteratively in conjunction with hydrodynamics. Previous studies have therefore been limited to 1D models of this process. In this paper we compare 2D-axisymmetric models of externally photoevaporating discs with their 1D analogues, finding that mass loss rates are consistent to within a factor four. The mass loss rates in 2D are higher, in part because half of the mass loss comes from the disc surface (which 1D models neglect). 1D mass loss rates used as the basis for disc viscous evolutionary calculations are hence expected to be conservative. We study the anatomy of externally driven winds including the streamline morphology, kinematic, thermal and chemical structure. A key difference between the 1D and 2D models is in the chemical abundances. For instance in the 2D models CO can be dissociated at smaller radial distances from the disc outer edge than in 1D calculations because gas is photodissociated by radiation along trajectories that are assumed infinitely optically thick in 1D models. Multidimensional models will hence be critical for predicting observable signatures of environmentally photoevaporating protoplanetary discs.

Evolving optical polarisation of the black hole X-ray binary MAXI J1820+070

Aims. The optical emission of black hole transients increases by several magnitudes during the X-ray outbursts. Whether the extra light arises from the X-ray heated outer disc, from the inner hot accretion flow, or from the jet is currently debated. Optical polarisation measurements are able to distinguish the relative contributions of these components. Methods. We present the results of BVR polarisation measurements of the black hole X-ray binary MAXI J1820+070 during the period of March-April 2018. Results. We detect small, ∼0.7%, but statistically significant polarisation, part of which is of interstellar origin. Depending on the interstellar polarisation estimate, the intrinsic polarisation degree of the source is between ∼0.3% and 0.7%, and the polarisation position angle is between ∼10 ° −30°. We show that the polarisation increases after MJD 58222 (2018 April 14). The change is of the order of 0.1% and is most pronounced in the R band. The change of the source Stokes parameters occurs simultaneously with the drop of the observed V-band flux and a slow softening of the X-ray spectrum. The Stokes vectors of intrinsic polarisation before and after the drop are parallel, at least in the V and R filters. Conclusions. We suggest that the increased polarisation is due to the decreasing contribution of the non-polarized component, which we associate with the the hot flow or jet emission. The low polarisation can result from the tangled geometry of the magnetic field or from the Faraday rotation in the dense, ionised, and magnetised medium close to the black hole. The polarized optical emission is likely produced by the irradiated disc or by scattering of its radiation in the optically thin outflow.

Non-linear outcome of gravitational instability in an irradiated protoplanetary disc

Using local three dimensional radiation hydrodynamics simulations, the nonlinear outcome of gravitational instability in an irradiated protoplanetary disc is investigated in a parameter space of the surface density $\Sigma$ and the radius $r$. Starting from laminar flow, axisymmetric self-gravitating density waves grow first. Their self-gravitating degree becomes larger when $\Sigma$ is larger or the cooling time is shorter at larger radii. The density waves eventually collapse owing to non-axisymmetric instability, which results in either fragmentation or gravito-turbulence after a transient phase. The boundaries between the two are found at $r \sim 75$ AU as well as at the $\Sigma$ that corresponds to the initial Toomre's parameter of $\sim 0.2$. The former boundary corresponds to the radius where the cooling time becomes short, approximating unity. Even when gravito-turbulence is established around the boundary radius, such a short cooling time inevitably makes the fluctuation of $\Sigma$ large enough to trigger fragmentation. On the other hand, when $\Sigma$ is beyond the latter boundary (i.e. the initial Toomre's parameter is less than $\sim 0.2$), the initial laminar flow is so unstable against self-gravity that it evolves into fragmentation regardless of the radius or, equivalently, the cooling time. Runaway collapse follows fragmentation when the mass concentration at the centre of a bound object is high enough that the temperature exceeds the H$_2$ dissociation temperature.

The corona contracts in a black-hole transient.

The geometry of the accretion flow around stellar-mass black holes can change on timescales of days to months1-3. When a black hole emerges from quiescence (that is, it 'turns on' after accreting material from its companion) it has a very hard (high-energy) X-ray spectrum produced by a hot corona4,5 positioned above its accretion disk, and then transitions to a soft (lower-energy) spectrum dominated by emission from the geometrically thin accretion disk, which extends to the innermost stable circular orbit6,7. Much debate persists over how this transition occurs and whether it is driven largely by a reduction in the truncation radius of the disk8,9 or by a reduction in the spatial extent of the corona10,11. Observations of X-ray reverberation lags in supermassive black-hole systems12,13 suggest that the corona is compact and that the disk extends nearly to the central black hole14,15. Observations of stellar-mass black holes, however, reveal equivalent (mass-scaled) reverberation lags that are much larger16, leading to the suggestion that the accretion disk in the hard-X-ray state of stellar-mass black holes is truncated at a few hundreds of gravitational radii from the black hole17,18. Here we report X-ray observations of the black-hole transient MAXI J1820+07019,20. We find that the reverberation time lags between the continuum-emitting corona and the irradiated accretion disk are 6 to 20 times shorter than previously seen. The timescale of the reverberation lags shortens by an order of magnitude over a period of weeks, whereas the shape of the broadened iron K emission line remains remarkably constant. This suggests a reduction in the spatial extent of the corona, rather than a change in the inner edge of the accretion disk.

Gamma-Ray Bursts Generated by Hyper-Accreting Kerr Black Hole

The observed properties of Gamma-Ray Bursts such as rapid variability of X-ray light curve and large energies strongly signature the compact binary, disk accreting system. Our work particularly highlights the extremely rotating, disk accreting black holes as physical source of the flares variability and X-ray afterglow plateaus of GRBs. We investigate the compact binary mergers (neutron star - neutron star and neutron star onto black hole) and gravitational core collapse of super massive star, where in both cases hyper-accreting Kerr hole is formed. The core collapse in a powerful gravitational wave explained as a potential source for the radiated flux of hard X-rays spectrum. We described the evolution of rapidly rotating, accreting BH in general relativity and the relativistic accretion flow in resistive MHD for viscous radiation. We compute the structure of accretion disk, the accretion luminosity of the dynamical evolution of inner accretion disk and precisely determine their radiation spectra, and compare to observational data of X-ray satellites. Finally, we obtained the resulting disk radiation basically explained as the X-ray luminosity of the central source, such as LMC X-1 and GRO J1655-40. These results are interestingly consistent with observational data of galactic X-ray source binary systems such as X-ray luminosities of Cygnus X-1 and Seyfert galaxies (NGC 3783, NGC 4151, NGC 4486 (Messier 87)) which are powerful emitters in X-ray and gamma-ray wavebands of the observed X-ray variability with typical luminosity.

The Development of New Dosimetry System using an Optic-Disk Radiation Sensor for Pencil Beam Scanning Mode

A measurement of integral depth dose profile (IDD) for the pencil beam scanning (PBS) is very important for the accurate delivery of dose to the target volume with a good conformity. In the beam commissioning process for PBS treatment method, the IDD profiles are commonly acquired for the beam modeling of treatment planning system. In this study, we fabricated an optic-disk radiation sensor (ODRS) and characterized the photoluminescence signal generated from an optical disk as fundamental research for the development and evaluation of a new dosimetric system for pencil beam proton therapy using an ODRS system. The relative IDD curve of proton beam was obtained by ODRS system and analyzed with it measured by ion chamber. We proposed an innovative method using a signal generated in clear plastic optic disk. We fabricated the ODRS system for measuring the photoluminescence signal induced by therapeutic pencil beam proton beams, respectively. Homemade phantoms based optic disk made of poly methyl methacrylate were fabricated to allow the optic disk to be exposed in the direction of the beam inside a water phantom capable of 3D operation. The photoluminescence signal generated from the optic disk by the proton beam was converted to an electric signal by a multi-anode photomultiplier tube (MAPMT: H7546, Hamamatsu Photonics, Shizuoka, Japan) connected to the plastic optic fiber surrounding the disk, NI-DAQ system, which allows us to check in real time through a notebook computer. The basic characteristics as the dosimetry sensor for this system based optic disk are described. The linearity relationship between the output according to the dose and dose rate measured using the ion chamber and the photoluminescence signal obtained by this system was confirmed, and the result was shown to be linear. The calibration factor for the energy was found to be close to zero, and it was confirmed that the energy dependence on the optic disk need not be considered. The relative IDD profiles were obtained using the photoluminescence signal generated by the pencil beam irradiation with two energies of 99.9 and 162.1 MeV in this system, which was compared with the curve measured by the Bragg chamber. The IDD results obtained by optic disk radiation sensor indicated good agreement without any correction process with the one by Bragg chamber. In this study, we developed a clear optic disk-based system to evaluate the characteristics for PBS beam dosimetry. An advantage of this system is that it can be easily extended to a two-dimensional array system for application in the PBS beam dosimetry. As a further study, we are developing the ODRS system which can measure the depth dose at each depth in 2 mm increments with respect to the direction of the PBS beam using a 2 mm thick disk array.

CLASP Constraints on the Magnetization and Geometrical Complexity of the Chromosphere-Corona Transition Region

Abstract The Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP) is a suborbital rocket experiment that on 2015 September 3 measured the linear polarization produced by scattering processes in the hydrogen Lyα line of the solar disk radiation. The line-center photons of this spectral line radiation mostly stem from the chromosphere-corona transition region (TR). These unprecedented spectropolarimetric observations revealed an interesting surprise, namely that there is practically no center-to-limb variation (CLV) in the Q/I line-center signals. Using an analytical model, we first show that the geometric complexity of the corrugated surface that delineates the TR has a crucial impact on the CLV of the Q/I and U/I line-center signals. Second, we introduce a statistical description of the solar atmosphere based on a 3D model derived from a state-of-the-art radiation magnetohydrodynamic simulation. Each realization of the statistical ensemble is a 3D model characterized by a given degree of magnetization and corrugation of the TR, and for each such realization we solve the full 3D radiative transfer problem taking into account the impact of the CLASP instrument degradation on the calculated polarization signals. Finally, we apply the statistical inference method presented in a previous paper to show that the TR of the 3D model that produces the best agreement with the CLASP observations has a relatively weak magnetic field and a relatively high degree of corrugation. We emphasize that a suitable way to validate or refute numerical models of the upper solar chromosphere is by confronting calculations and observations of the scattering polarization in ultraviolet lines sensitive to the Hanle effect.

Evolution of X-ray irradiation during the 1999–2000 outburst of the black hole binary XTE J1859 + 226

X-ray irradiation in X-ray binaries is thought to control the behavior at the outer disc, which is observable mainly at optical wavelengths. It is generally parameterized phenomenologically, but it can also be predicted from theoretical models of irradiated discs and their coronae/winds. We test these models using five multi-wavelength Hubble Space Telescope (HST) and quasi simultaneous Rossi X-Ray Timing Explorer (RXTE) datasets from the black-hole binary XTE J1859$+$226. These show how the reprocessed optical emission changes during outburst as the source fades from the very high/intermediate state at $\sim$0.4$L_{\rm Edd}$ down through the high/soft state towards the transition to the hard state at $\sim$0.02$L_{\rm Edd}$. The models are able to reproduce the small change in reprocessing efficiency as the source flux decreases by a factor of two, and the spectrum softens from the very high/intermediate state to the bright high/soft state. However, the low luminosity high/soft state as well as the transition spectrum show more complex behaviour that is not well described by current models. We suggest the disc geometry has changed drastically during the outburst, probably due to tidal forces, and that the disc is no longer in steady state at the late stage of the outburst.

Toward a novel dosimetry system using acrylic disk radiation sensor for proton pencil beam scanning.

Fabricate an acrylic disk radiation sensor (ADRS) and characterize the photoluminescence signal generated from the optical device as basis for the development and evaluation of a new dosimetry system for pencil beam proton therapy. Based on the characteristics of the proposed optical dosimetry sensor, we established the relation between the photoluminescence output and the applied dose using an ionization chamber. Then, we obtained the relative integral depth dose profiles using the photoluminescence signal generated by pencil beam irradiation at energies of 99.9 and 162.1 MeV, and compared the results with the curve measured using a Bragg peak ionization chamber. The relation between the photoluminescence output and applied dose was linear. In addition, the ADRS was dose independent for beam currents up to 6 Gy/min, and the calibration factor for energy was close to 1. Hence, the energy dependence on the optical device can be disregarded. The integral depth dose profiles obtained for the ADRS suitable agreed with the curve measured in the Bragg peak ionization chamber without requiring correction. These results suggest that the ADRS is suitable for dosimetry measurements in pencil beam scanning, and it will be employed as a low-cost and versatile dosimetry sensor in upcoming developments.

A Statistical Inference Method for Interpreting the CLASP Observations

Abstract On 2015 September 3, the Chromospheric Lyman-Alpha SpectroPolarimeter (CLASP) successfully measured the linear polarization produced by scattering processes in the hydrogen Lyα line of the solar disk radiation, revealing conspicuous spatial variations in the Q/I and U/I signals. Via the Hanle effect, the line-center Q/I and U/I amplitudes encode information on the magnetic field of the chromosphere–corona transition region, but they are also sensitive to the three-dimensional structure of this corrugated interface region. With the help of a simple line-formation model, here we propose a statistical inference method for interpreting the Lyα line-center polarization observed by CLASP.

The FRIED grid of mass-loss rates for externally irradiated protoplanetary discs

We present an open access grid of 3930 calculations of externally evaporating protoplanetary discs. This spans a range of disc sizes (1-400AU), disc masses, UV field strengths (10-10$^4$G$_0$) and stellar masses (0.05-1.9M$_\odot$). The grid is publicly available for download, and offers a means of cheaply including external photoevaporation in disc evolutionary calculations. It can also be queried using an online tool for quick estimates of instantaneous mass loss rates (e.g for convenient evaluation of real observed systems). The `FRIED' grid itself illustrates that for discs around stars $\leq0.3$M$_\odot$ external photoevaporation is effective down to small radii ($<50$AU) down to UV fields at least as weak as 10G$_0$. At the other end of the scale, in a $10^4$G$_0$ environment photoevaporation is effective down to 1AU even for stellar masses at least as high as 1.9M$_\odot$. We also illustrate in which regimes CO survives in the photoevaporative outflow for significant mass loss rates; marking a system a good candidate to detect external photoevaporation in weak-intermediate UV environments through sub-Keplerian rotation. Finally we make illustrative mass loss rate estimates for discs in Taurus based on the Guilloteau et al. (2011) star-disc parameters, finding that around half are expected to have both significant mass loss and retain CO in the photoevaporative outflow.

Herschel Observations of Protoplanetary Disks in Lynds 1641*

Abstract We analyze Herschel Space Observatory observations of 104 young stellar objects with protoplanetary disks in the ∼1.5 Myr star-forming region Lynds 1641 (L1641) within the Orion A Molecular Cloud. We present spectral energy distributions from the optical to the far-infrared including new photometry from the Herschel Photodetector Array Camera and Spectrometer at 70 μm. Our sample, taken as part of the Herschel Orion Protostar Survey, contains 24 transitional disks, 8 of which we identify for the first time in this work. We analyze the full disks (FDs) with irradiated accretion disk models to infer dust settling properties. Using forward modeling to reproduce the observed n K S − [ 70 ] index for the FD sample, we find the observed disk indices are consistent with models that have depletion of dust in the upper layers of the disk relative to the midplane, indicating significant dust settling. We perform the same analysis on FDs in Taurus with Herschel data and find that Taurus is slightly more evolved, although both samples show signs of dust settling. These results add to the growing literature that significant dust evolution can occur in disks by ∼1.5 Myr.

Multiple Feedback in Low-Metallicity Massive Star Formation

AbstractWe theoretically investigate the impact of feedback and its metallicity dependence in massive star formation from prestellar cores at all metallicity range. We include the feedback by MHD disk winds, radiation pressure, and photoevaporation solving the evolution of protostars and accretion flows self-consistently. Interestingly, we find that the feedback does not set the upper mass limit of stellar birth mass at any metallicity. At the solar metallicity, the MHD disk wind is the dominant feedback to set the star formation efficiencies (SFEs) from the prestellar cores similar to low-mass star formation. The SFE is found to be lower at lower surface density environment. The photoevaporation becomes significant at the low metallicity of Z &lt; 10−2 Z⊙. Considering this efficient photoevaporation, we conclude that the IMF slope is steeper, i.e., massive stars are rarer at the extremely metal-poor environment of 10−5 − 10−3Z⊙. Our study raises a question on the common assumption of the universal IMF with a truncated at 100M⊙. Since the total feedback strength in the cluster/galaxy scale is sensitive to the number fraction of massive stars, the re-evaluations of IMF at various environments are necessary.

Photothermal generation of programmable microbubble array on nanoporous gold disks.

We present a novel technique to generate microbubbles photothermally by continuous-wave laser irradiation of nanoporous gold disk (NPGD) array covered microfluidic channels. When a single laser spot is focused on the NPGDs, a microbubble can be generated with controlled size by adjusting the laser power. The dynamics of both bubble growth and shrinkage are studied. Using computer-generated holography on a spatial light modulator (SLM), simultaneous generation of multiple microbubbles at arbitrary locations with independent control is demonstrated. A potential application of flow manipulation is demonstrated using a microfluidic X-shaped junction. The advantages of this technique are flexible bubble generation locations, long bubble lifetimes, no need for light-adsorbing dyes, high controllability over bubble size, and relatively lower power consumption.

A Cavity of Large Grains in the Disk around the Group II Herbig Ae/Be Star HD 142666

Abstract Herbig Ae/Be (HAeBe) stars have been classified into Group I or Group II, and were initially thought to be flared and flat disks, respectively. Several Group I sources have been shown to have large gaps, suggesting ongoing planet formation, while no large gaps have been found in the disks of Group II sources. We analyzed the disk around the Group II source, HD 142666, using irradiated accretion disk modeling of the broadband spectral energy distribution along with the 1.3 mm spatial brightness distribution traced by Atacama Large Millimeter and Submillimeter Array (ALMA) observations. Our model reproduces the available data, predicting a high degree of dust settling in the disk, which is consistent with the Group II classification of HD 142666. In addition, the observed visibilities and synthesized image could only be reproduced when including a depletion of large grains out to ∼ 16 au in our disk model, although the ALMA observations did not have enough angular resolution to fully resolve the inner parts of the disk. These results may suggest that some disks around Group II HAeBe stars have cavities of large grains as well. Further ALMA observations of Group II sources are needed to discern how commonly cavities occur in this class of objects, as well as to reveal their possible origins.

Demonstration of the bactericidal effects of the boron neutron capture reaction

This pilot study represents a paradigm shift, using BNCT for the treatment of bacterial overgrowth on surgically implanted medical devices. In this study, titanium diboride disks were inoculated with S. aureus and irradiated in a thermal neutron beam. After a delivery of 2.6 × 1012 n/cm2 the surviving fraction of S. aureus on an irradiated disk was 3.1 × 10−5 when compared with non-irradiated controls. This pilot study demonstrates proof of principle of boron neutron capture therapy for infection control (BNCIC).

Optical and Gamma-Ray Variability Behaviors of 3C 454.3 from 2006 to 2011

Abstract We present our photometric monitoring of a flat spectrum radio quasar 3C 454.3 at Yunnan observatories from 2006 to 2011. We find that the optical color of 3C 454.3 shows an obvious redder-when-brighter trend, which reaches a saturation stage when the source is brighter than 15.15 mag at V band. We perform a simulation with multiple values of disk luminosity and spectral index to reproduce the magnitude–color diagram. The results show that the contamination caused by the disk radiation alone is difficult to produce the observed color variability. The variability properties during the outburst in 2009 December are also compared with γ-ray data derived from the Fermi γ-ray space telescope. The flux variation of these two bands follows a linear relation with , which provides observational evidence for the external Compton process in 3C 454.3. Meanwhile, this flux correlation indicates that electron injection is the main mechanism for the variability origin. We also explore the variation of the flux ratio F γ /F R and the detailed structures in the light curves, and discuss some possible origins for the detailed variability behaviors.

Direct mapping of the temperature and velocity gradients in discs

Accurate measurements of the physical structure of protoplanetary discs are critical inputs for planet formation models. These constraints are traditionally established via complex modelling of continuum and line observations. Instead, we present an empirical framework to locate the CO isotopologue emitting surfaces from high spectral and spatial resolution ALMA observations. We apply this framework to the disc surrounding IM Lupi, where we report the first direct, i.e. model independent, measurements of the radial and vertical gradients of temperature and velocity in a protoplanetary disc. The measured disc structure is consistent with an irradiated self-similar disc structure, where the temperature increases and the velocity decreases towards the disc surface. We also directly map the vertical CO snow line, which is located at about one gas scale height at radii between 150 and 300 au, with a CO freeze-out temperature of 21 ± 2 K. In the outer disc (&gt;300 au), where the gas surface density transitions from a power law to an exponential taper, the velocity rotation field becomes significantly sub-Keplerian, in agreement with the expected steeper pressure gradient. The sub-Keplerian velocities should result in a very efficient inward migration of large dust grains, explaining the lack of millimetre continuum emission outside of 300 au. The sub-Keplerian motions may also be the signature of the base of an externally irradiated photo-evaporative wind. In the same outer region, the measured CO temperature above the snow line decreases to ≈15 K because of the reduced gas density, which can result in a lower CO freeze-out temperature, photo-desorption, or deviations from local thermodynamic equilibrium.