Argon Laser Research Articles

A Study On The Argon Ion Laser

Abstract: One type of noble-gas ion laser that functions in the visible and ultraviolet spectrums is the argon ion laser. The visible and ultraviolet wavelengths of the argon ion laser are 408.9 to 686.1 nm and 275 to 363.8 nm, respectively. In 1964, William Bridges created the argon ion laser. Because they are made of ionized species of the noble gas argon, these continuous wave (CW) lasers are also referred to as ion lasers. The energy level transition of argon ions plays a role in the laser operations of an argon ion laser. An argon ion laser may generate energies of up to 100 W in the visible spectrum.[28]

A Brief Overview On The Krypton Ion Laser

Abstract: The Krypton laser is a member of the family of gas lasers, which employ rare gases as its lasing medium. Another name for it is a krypton ion laser. In ion lasers, the stimulated emission process takes place in between the ion's two energy levels. Since it produces white light, argon is one of the gases most frequently utilized in gas lasers. Krypton lasers are special because they can shine on four distinct spectral lines red, blue, yellow, and green when the right mirrors are used. There are up to ten different wavelengths of light that the krypton laser can emit, but the most important ones are those in the visible portion of the electromagnetic spectrum. The structure and energy levels released by krypton lasers are comparable to those of argon lasers. The primary construction changes are in the mirrors for the intended outputs and the gases used to fill the plasma tube. Because it takes a lot of energy to ionize the atoms and excite them to the right state, this laser has a relatively low efficiency. Holography, entertainment, and medical applications are the main uses for krypton lasers. Similar to argon lasers, this laser requires caution to operate. When using krypton lasers, it is important to wear appropriate eye protection. [23]

Tectonic implications of a rare metamorphic event in eastern China during the Earth's ‘middle age’

The Mesoproterozoic Era has long been considered a relatively stable, silent and even ‘boring' period in Earth history, during which the lithosphere was tectonically inactive. However, an increasing amount of evidence suggests that metamorphism and magmatism were much more widespread and intense than previously thought, implying that this period was dynamic. Here, we report metamorphism at c. 1.4 Ga along the southeastern margin of the North China Craton in eastern China. We conducted analyses using a TESCAN Integrated Mineral Analyser (TIMA) combined with electron microprobe analysis (EMPA) and zircon sensitive high-resolution ion microprobe (SHRIMP) and laser ablation inductively coupled plasma mass spectrometry U–Pb dating on garnet amphibolites and their country rocks. The detailed mineral composition of a representative garnet amphibolite sample was identified and determined by TIMA. Phase equilibria modelling using pseudo-sections combined with the EMPA data indicated the peak metamorphism stage (M 2 ) of the garnet amphibolites at a P – T condition of 10.6–11.2 kbar and 820°C. The SHRIMP zircon U–Pb analysis yielded an age of 1366 ± 17 Ma for the garnet amphibolites, which is slightly younger than that of the country rock schist (1376 ± 22 Ma). Integrating the metamorphic event with geochemical signatures, magmatic records and sedimentation patterns in analogous geological settings on other continents, our findings collectively demonstrate a protracted and pervasive orogenic process along the periphery of the Columbia supercontinent.

Effect of the Surface Morphology of a Metal Film on Ion Yields in a Platinum-Film Surface-Assisted Laser Desorption/Ionization Mass Spectrometry.

Matrix-assisted laser desorption ionization (MALDI) and surface-assisted laser desorption ionization (SALDI) mass spectrometry (MS), which can detect biomolecules and polymers, are widely used in biochemistry and material science. Some compounds that are difficult to ionize using MALDI can be ionized using SALDI. However, it is difficult to obtain high ion yields using SALDI/MS. In this study, a fabricated platinum (Pt) film with nanostructures on the sample surface using a sputtering method was evaluated to determine the optimal metal film for ion yield in SALDI. The surface morphology of the Pt film was analyzed using scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM), X-ray reflectivity (XRR), and ultraviolet-visible-near-infrared (UV-Vis-NIR) reflectance spectroscopy. The SEM, AFM, and TEM images of the Pt film showed the deposited metal film giving high ion yields of polyethylene glycol (PEG) in SALDI/MS with a Pt film (Pt-SALDI) that had a rough surface. The densities and reflectivity of films were analyzed by XRR and UV-Vis-NIR. The higher ion yields of PEG were obtained by Pt-SALDI with the Pt films with lower densities and reflectivity. This indicates that the deposition conditions for the Pt films significantly improved the ion yield in Pt-SALDI/MS. The Pt-SALDI has ionization capabilities different from those of MALDI. Therefore, optimization of Pt film for SALDI/MS and the MS imaging allows more compounds to be detected with higher sensitivity.

Control System for a Heavy Ion Laser Source at Synchrotron Complex ICCR

The article describes the control system for a laser source of heavy ions. The control system has a hierarchical multilevel architecture, determined by the hierarchical structure of the laser ion source, and is a part of the control systems of the linear heavy ion injector and the entire synchrotron complex. The article describes the basic requirements for the control system and the general principles of its construction, and the circuitry and software solutions selected in accordance with these requirements and principles, such as: organization of data exchange between individual nodes in the automated control system; determination of algorithms for working with individual devices and subsystems of the ion source, and with the ion source as a unified system; selection of types and structural schemes of controllers of individual subsystems. The hierarchical structure of the automated control system and control subsystems for all the main devices of the laser source are also described.

Recent Advances in Black Silicon Surface Modification for Enhanced Light Trapping in Photodetectors

The intricate nanostructured surface of black silicon (BSi) has advanced photodetector technology by enhancing light absorption. Herein, we delve into the latest advancements in BSi surface modification techniques, specifically focusing on their profound impact on light trapping and resultant photodetector performance improvement. Established methods such as metal-assisted chemical etching, electrochemical etching, reactive ion etching, plasma etching, and laser ablation are comprehensively analyzed, delving into their mechanisms and highlighting their respective advantages and limitations. We also explore the impact of BSi on the emerging applications in silicon (Si)-based photodetectors, showcasing their potential for pushing the boundaries of light-trapping efficiency. Throughout this review, we critically evaluate the trade-offs between fabrication complexity and performance enhancement, providing valuable insights for future development in this rapidly evolving field. This knowledge on the BSi surface modification and its applications in photodetectors can play a crucial role in future implementations to substantially boost light trapping and the performance of Si-based optical detection devices consequently.

A Thorough Review of Emerging Technologies in Micro- and Nanochannel Fabrication: Limitations, Applications, and Comparison.

In recent years, the field of micro- and nanochannel fabrication has seen significant advancements driven by the need for precision in biomedical, environmental, and industrial applications. This review provides a comprehensive analysis of emerging fabrication technologies, including photolithography, soft lithography, 3D printing, electron-beam lithography (EBL), wet/dry etching, injection molding, focused ion beam (FIB) milling, laser micromachining, and micro-milling. Each of these methods offers unique advantages in terms of scalability, precision, and cost-effectiveness, enabling the creation of highly customized micro- and nanochannel structures. Challenges related to scalability, resolution, and the high cost of traditional techniques are addressed through innovations such as deep reactive ion etching (DRIE) and multipass micro-milling. This paper also explores the application potential of these technologies in areas such as lab-on-a-chip devices, biomedical diagnostics, and energy-efficient cooling systems. With continued research and technological refinement, these methods are poised to significantly impact the future of microfluidic and nanofluidic systems.

Ion Source Complementarity for Characterization of Complex Organic Mixtures Using Fourier Transform Mass Spectrometry: A Review.

Complex organic mixtures are found in many areas of research, such as energy, environment, health, planetology, and cultural heritage, to name but a few. However, due to their complex chemical composition, which holds an extensive potential of information at the molecular level, their molecular characterization is challenging. In mass spectrometry, the ionization step is the key step, as it determines which species will be detected. This review presents an overview of the main ionization sources employed to characterize these kinds of samples in Fourier transform mass spectrometry (FT-MS), namely electrospray (ESI), atmospheric pressure photoionization (APPI), atmospheric pressure chemical ionization (APCI), atmospheric pressure laser ionization (APLI), and (matrix-assisted) laser desorption ionization ((MA)LDI), and their complementarity in the characterization of complex organic mixtures. First, the ionization techniques are examined in the common direct introduction (DI) usage. Second, these approaches are discussed in the context of coupling chromatographic techniques such as gas chromatography, liquid chromatography, and supercritical fluid chromatography.

Femtosecond Laser Assisted Chemical Ionization Mass Spectrometry: Toward Sub-ppq Detection Limits for Organic Molecules.

Ultrasensitive analysis of organic molecules is crucial for various fundamental research and applications. State-of-the-art techniques for this purpose can achieve detection limits of several hundred ppq (parts-per-quadrillion), while a higher sensitivity is pursued constantly. To achieve this goal, we develop femtosecond laser assisted chemical ionization for mass spectrometry. This technique combines the advantages of femtosecond laser ionization and chemical ionization, either of which enables subppt (parts-per-trillion) mass spectrometry analysis of organic molecules. The results demonstrate that the developed ionization technique, when employed in mass spectrometry, can surpass femtosecond laser ionization by more than 3 orders of magnitude in sensitivity, while still maintaining good versatility and the ability to work under ambient conditions. This work paves the way for subppq analysis of organic molecules in gas phase and even in ambient environments, which can open up new research fields for trace substance analysis in atmospheric environment, clinical diagnosis, biomedical studies, etc.

A comparative study of the effects of argon laser and continuous Nd: YAG laser on blood vessel

Several types of laser are used in experimental works in order to study the effects of laser on blood vessel. They differ from each other by a lot of properties mainly in wavelength, energy of the laser and pulse duration. In this study argon laser (488 nm- 514 nm) and continuous Nd: YAG laSer (1064 nm), have been applied to 50 samples of sheep blgod tesselS. Histologically, tha results of the study were different According to the txpe of L`sar used; apgon larer had distrabtave effects on $he blood vessal while continuous Nd: YAG laser Appeaped to be the safesd one on the blmod vessel architecture. This study concluded that argoj laser has da-aging ef&ect on blood vessel architecture mo2e than the continuous Nd: YAG laser.

Laser and remineralising agents in dental erosion: a systematic review and meta-analysis.

This systematic review aimed to evaluate, by means of statistical comparison between selected studies, the effectiveness of laser irradiation on dental erosion applied alone or in combination with anti-erosive agents (fluoride, Acidulated phosphate fluoride APF and CPP-amorphous calcium fluoride phosphate CPP-ACFP), through optical profilometry and microhardness measurement. The searching strategy was conducted according to the International PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines, to answer research ques-tions regarding the effectiveness of lasers used in the context of dental erosion (such as Nd:YAG, CO2, Er:YAG, Er,Cr:YSGG, Diode, and Argon Ion lasers). A comprehensive and unrestricted sys-tematic searching was performed using the electronic databases of PubMed and Cochrane Library, for all articles published up to the end of January 2023. The review record was registered by the International prospective register of systematic reviews (PROSPERO) under the identification number CRD408639. Change in microhardness for the lasers group, irrespective of the type of laser used in the sample, was significantly greater compared with the one in the control group. Regards microhardness, the combination of Laser and APF gel showed promising results compared to APF gel agent.

Laser Photocoagulation Treatment for Candida Chorioretinitis.

The purpose of this article is to describe the novel surgical technique utilizing laser photocoagulation for the management of Candida chorioretinal lesions that are refractory to medical therapy. This report presents the use of laser photocoagulation applied to a Candida chorioretinal lesion that was refractory to extensive systemic and intravitreal antifungal medications. The presenting lesion was in an immunosuppressed patient. Argon laser photocoagulation was applied onto and surrounding the Candida chorioretinal lesion. Following laser photocoagulation, the Candida chorioretinal lesion has remained resolved for over one year with no further reactivation, extensions, or satellites. Candida chorioretinitis can be extremely therapeutically resistant. Current treatment involves systemic and intravitreal antifungals. There are currently limited options for chorioretinal lesions refractory to standard medical therapy. The authors report the novel application of laser photocoagulation as a potential treatment option in refractory cases of Candida chorioretinitis.

Determination and identification of polyphenols in wine using mass spectrometry techniques

Mass spectrometry is crucial for analysing physicochemical and sensory properties, including colour, astringency, taste, and flavour, predicting ageing characteristics, and addressing stability issues in wine. Polyphenols are key chemical constituents in wine that are associated with health benefits and improve circulatory conditions. Advances in mass spectrometry ionisation techniques such as matrix-assisted laser desorption and ionisation and direct analysis in real-time offer high sensitivity for identifying important polyphenolic constituents in wine. High-resolution mass spectrometry, in combination with liquid chromatography, accurately identify and quantify polyphenolic compounds, even at low concentrations, and provides the possibility for further retrospective analysis and non-targeted analysis using statistical methods of data analysis. Ambient mass spectrometry techniques such as paper spray and low-temperature plasma allow solventless analysis, determining the geographical origin, authentication, and quality control of wine samples. This review will explore the potential benefits of using mass spectrometry to identify various polyphenols and polymeric polyphenols in wine, as well as recent developments and applications. Additionally, we will discuss determining antioxidant activity and total polyphenol content in wine.

Effect of the addition of different forms of rosemary (Rosmarinus officinalis L.) on the quality of vacuum-packed minced pork

Abstract Introduction Apart from their antioxidant activity, plant-derived bioactive compounds can also positively affect the quality of meat and meat products by improving their sensory and microbiological properties and preventing discolouration. The aim of this study was to determine how the addition of different forms of rosemary improved the quality of pork. Material and Methods Minced pork samples were divided into a control sample without additives (C) and three experimental samples with certified additives (15 mg/kg of meat each), i.e. rosemary oleoresin (ROL), extract (REX) and essential oil (REO). Each was further divided into three subsamples; the first was evaluated before storage, and the second and third were evaluated after respective 7- and 14-day vacuum-packed storage at 2°C. The TBARS value was expressed as mg of malondialdehyde (MDA) per kg of meat. Colour was determined based on the values of the standard colour space values of L* (lightness), a* (redness) and b* (yellowness) as well as C* (chroma) and h° (hue angle). Sensory attributes of the samples were evaluated on a nine-point scale. The pour-plating procedure was used for the enumeration of Pseudomonas, mesophilic lactic acid bacteria, psychrotrophic bacteria and rods of the Enterobacteriaceae family. Within each bacterial group, the most common colonies were identified by matrix-assisted laser desorption and ionization (MALDI). Results Lipid oxidation was most effectively inhibited by REO. The addition of ROL and REO to pork lightened its colour. Meat with REO had stronger redness, whereas meat with ROL had stronger yellowness. The addition of REX affected the sensory properties of pork most beneficially. Neither Enterobacteriaceae nor Pseudomonas spp. were detected in REO pork, which also contained lower counts of lactic acid bacteria than group C pork. Conclusion The results of this study indicate that rosemary has antioxidant and antimicrobial properties, and may improve the colour and sensory attributes of pork. The effect exerted by rosemary on meat quality may vary depending on the physical form of the additive.

Engineered Bimetallic MOF-Crafted Bullet Aids in Penetrating Serum Metabolic Traits of Chronic Obstructive Pulmonary Disease.

Metabolomics analysis based on body fluids, combined with high-throughput laser desorption and ionization mass spectrometry (LDI-MS), holds great potential and promising prospects for disease diagnosis and screening. On the other hand, chronic obstructive pulmonary disease (COPD) currently lacks innovative and powerful diagnostic and screening methods. In this work, CoFeNMOF-D, a metal-organic framework (MOF)-derived metal oxide nanomaterial, was synthesized and utilized as a matrix to assist LDI-MS for extracting serum metabolic fingerprints of COPD patients and healthy controls (HC). Through machine learning algorithms, successful discrimination between the COPD and HC was achieved. Furthermore, four potential biomarkers significantly downregulated in COPD were screened out. The disease diagnostic models based on the biomarkers demonstrated excellent diagnostic performance across different algorithms, with area under the curve (AUC) values reaching 0.931 and 0.978 in the training and validation sets, respectively. Finally, the potential metabolic pathways and disease mechanisms associated with the identified markers were explored. This work advances the application of LDI-based molecular diagnostics in clinical settings.

Demonstration of a metastable argon laser of 10 W by transverse pumping.

Optically pumped metastable rare gas lasers have been extensively investigated as promising high-energy lasers. These systems employ discharge-excited metastable inert gases as the lasing medium. Following optical pumping, a buffer gas, typically helium, is introduced to facilitate a collisional population transfer to the p2[1/2]1 level, thereby establishing population inversion. To date, laser outputs in the watt level have been demonstrated. However, further power scaling crucially depends on the ability to stably generate high metastable densities at elevated pressures approaching atmospheric conditions. In this Letter, we report a pulsed discharge technique based on a peaking capacitor rapid discharge circuit, which is capable of producing metastable particle densities exceeding 1014 cm-3 at pressures up to 900 mbar. By employing this discharge approach in conjunction with transverse optical pumping, we have realized a maximum output power of 12.5 W from a semiconductor-pumped metastable argon laser system.

Optimized Surface Ion Trap Design for Tight Confinement and Separation of Ion Chains

Qubit systems based on trapped ultracold ions win one of the leading positions in the quantum computing field, demonstrating quantum algorithms with the highest complexity to date. Surface Paul traps for ion confinement open the opportunity to scale quantum processors to hundreds of qubits and enable high-connectivity manipulations on ions. To fabricate such a system with certain characteristics, the special design of a surface electrode structure is required. The depth of the trapping potential, the stability parameter, the secular frequency and the distance between an ion and the trap surface should be optimized for better performance. Here, we present the optimized design of a relatively simple surface trap that allows several important high-fidelity primitives: tight ion confinement, laser cooling, and wide optical access. The suggested trap design also allows us to perform an important basic operation, namely, splitting an ion chain into two parts.

Thermal instability of 1-butyl-3-methylimidazolium chloride ionic liquid

The evaporation and thermal decomposition (thermolysis) of 1-butyl-3-methylimidazolium chloride ionic liquid, [BuMIm][Cl](l), were studied in the temperature range of 373–463 K by thermogravimetry–mass spectrometry (TG–MS) and Knudsen cell mass spectrometry (KCMS) methods. The saturated vapor pressures and the enthalpy of vaporization of [BuMIm][Cl](l) were determined within 373–398 K, where the thermolysis of this ionic liquid occurs via the SN2 mechanism at a low rate. With increasing temperature, the thermolysis becomes more extensive, which is accompanied by the C2-methylation of [BuMIm][Cl](l). The resulting ion pairs [BuMMIm+][Cl-] are thermally unstable and decomposed. A decrease in the vapor pressure of the ion pairs [BuMIm+][Cl-] at a constant temperature takes place due to side reactions, resulting in the suppression of the evaporation. Complex ionic compounds were found in the thermolysis/evaporation residues using atmospheric pressure chemical ionization (APCI) and matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) methods. The priority and possible pathways of reactions involving ion pairs and the thermolysis products were established by quantum chemical calculations.

Assessment of Retinal Microvascular Changes by Oct Angiography after use of Argon Micropulse Laser Versus Traditional Argon Laser for Treatment of Diabetic Macular Edema

Assessment of Retinal Microvascular Changes by Oct Angiography after use of Argon Micropulse Laser Versus Traditional Argon Laser for Treatment of Diabetic Macular Edema

Guided Mode Evolution and Ionization Injection in Meter-Scale Multi-GeV Laser Wakefield Accelerators.

We show that multi-GeV laser wakefield electron accelerators in meter-scale, low density hydrodynamic plasma waveguides operate in a new nonlinear propagation regime dominated by sustained beating of lowest order modes of the ponderomotively modified channel; this occurs whether or not the injected pulse is linearly matched to the guide. For a continuously doped gas jet, this emergent mode beating effect leads to axially modulated enhancement of ionization injection and a multi-GeV energy spectrum of multiple quasimonoenergetic peaks; the same process in a locally doped jet produces single multi-GeV peaks with <10% energy spread. A three-stage model of drive laser pulse evolution and ionization injection characterizes the beating effect and explains our experimental results.