Indoor Air Quality Measurements Research Articles

Field measurement of indoor air quality and airborne microbes in a near-zero energy house with an earth tube in the cold region of Japan

This study was conducted to evaluate the level of microbial contamination of indoor air during 3 years for two residences in one building equipped with heat recovery ventilation devices and located in Kimobetsu town of Hokkaido, Japan. This article documents a case study aimed at monitoring the microbes contaminations indoors for a safe use of energy saving ventilation devices and sanitary indoor air. This articles describes an investigative approach with three components. First, the authors evaluated the indoor air quality and microbial concentration by comparing the concentrations of particulate matter (PM10 and PM2.5), carbon dioxide, and airborne bacteria and fungi of indoor air and outdoor air during spring, summer and winter. Second, the microbial concentration inside an earth tube and a fixed sensible heat exchanger was evaluated by measuring the airborne microbial concentration of the supply air. Third, the authors assessed the possibility of microbial contamination inside the earth tube using the fungal index and by measuring temperature and relative humidity at the tube's outlet airflow. The results showed that the total concentration of airborne fungi was higher in summer than in spring or winter and that the fungal genera Cladosporium sp. and Penicillium sp. were dominant in the samples. Additionally, it was found that the environment inside the earth tube allowed easy growth of fungi from May to September with the highest fungal index measured in August. It was also confirmed that the earth tube did not affect the supply air for a building constructed 4 years ago.

Effects of Energy Retrofits on Indoor Air Quality in Three Northern European Countries

According to an assessment protocol developed as a part of the INSULAtE project, indoor air quality measurements were conducted in three Finnish and Lithuanian multifamily buildings before and after energy retrofits. Additional cases from Estonia included one retrofitted and two non-retrofitted buildings. Measured gaseous pollutants included carbon dioxide (CO2), volatile organic compounds (VOCs), formaldehyde (CH2O), and nitrogen dioxide (NO2). Low CO2 concentrations in Finland could be attributed to common use of mechanical exhaust ventilation. WHO guidelines for CH2O were not exceeded in any of the measured apartments. No statistically significant changes were seen in VOC or NO2 after retrofits.

Variability in exposure to ambient ultrafine particles in urban schools: Comparative assessment between Australia and Spain

Ambient ultrafine particle number concentrations (PNC) have inhomogeneous spatio-temporal distributions and depend on a number of different urban factors, including background conditions and distant sources. This paper quantitatively compares exposure to ambient ultrafine particles at urban schools in two cities in developed countries, with high insolation climatic conditions, namely Brisbane (Australia) and Barcelona (Spain). The analysis used comprehensive indoor and outdoor air quality measurements at 25 schools in Brisbane and 39 schools in Barcelona. PNC modes were analysed with respect to ambient temperature, land use and urban characteristics, combined with the measured elemental carbon concentrations, NOx (Brisbane) and NO2 (Barcelona). The trends and modes of the quantified weekday average daily cycles of ambient PNC exhibited significant differences between the two cities. PNC increases were observed during traffic rush hours in both cases. However, the mid-day peak was dominant in Brisbane schools and had the highest contribution to total PNC for both indoors and outdoors. In Barcelona, the contribution from traffic was highest for ambient PNC, while the mid-day peak had a slightly higher contribution for indoor concentrations. Analysis of the relationships between PNC and land use characteristics in Barcelona schools showed a moderate correlation with the percentage of road network area and an anti-correlation with the percentage of green area. No statistically significant correlations were found for Brisbane. Overall, despite many similarities between the two cities, school-based exposure patterns were different. The main source of ambient PNC at schools was shown to be traffic in Barcelona and mid-day new particle formation in Brisbane. The mid-day PNC peak in Brisbane could have been driven by the combined effect of background and meteorological conditions, as well as other local/distant sources. The results have implications for urban development, especially in terms of air quality mitigation and management at schools.

Time resolved measurements of indoor air quality in a smoking pub

Time resolved measurements of indoor air quality in a smoking pub

Discontinuous and Continuous Indoor Air Quality Monitoring in Homes with Fireplaces or Wood Stoves as Heating System.

Around 50% of the world’s population, particularly in developing countries, uses biomass as one of the most common fuels. Biomass combustion releases a considerable amount of various incomplete combustion products, including particulate matter (PM) and polycyclic aromatic hydrocarbons (PAHs). The paper presents the results of Indoor Air Quality (IAQ) measurements in six houses equipped with wood burning stoves or fireplaces as heating systems. The houses were monitored for 48-h periods in order to collect PM10 samples and measure PAH concentrations. The average, the maximum and the lowest values of the 12-h PM10 concentration were 68.6 μg/m3, 350.7 μg/m3 and 16.8 μg/m3 respectively. The average benzo[a]pyrene 12-h concentration was 9.4 ng/m3, while the maximum and the minimum values were 24.0 ng/m3 and 1.5 ng/m3, respectively. Continuous monitoring of PM10, PAHs, Ultra Fine Particle (UFP) and Total Volatile Organic Compounds (TVOC) was performed in order to study the progress of pollution phenomena due to biomass burning, their trends and contributions to IAQ. The results show a great heterogeneity of impacts on IAQ in terms of magnitude and behavior of the considered pollutants’ concentrations. This variability is determined by not only different combustion technologies or biomass quality, but overall by different ignition mode, feeding and flame management, which can also be different for the same house. Moreover, room dimensions and ventilation were significant factors for pollution dispersion. The increase of PM10, UFP and PAH concentrations, during lighting, was always detected and relevant. Continuous monitoring allowed singling out contributions of other domestic sources of considered pollutants such as cooking and cigarettes. Cooking contribution produced an impact on IAQ in same cases higher than that of the biomass heating system.

An investigation of indoor air quality, thermal comfort and sick building syndrome symptoms in UK energy efficient homes

Purpose – Concern of the deterioration of indoor environmental quality as a result of energy efficient building design strategies is growing. Apprehensions of the effect of airtight, super insulated envelopes, the reduction of infiltration, and the reliance on mechanical systems to provide adequate ventilation (air supply) is promoting emerging new research in this field. The purpose of this paper is to present the results of an indoor air quality (IAQ) and thermal comfort investigation in UK energy efficient homes, through a case study investigation. Design/methodology/approach – The case study dwellings consisted of a row of six new-build homes which utilize mechanical ventilation with heat recovery (MVHR) systems, are built to an average airtightness of 2m3/m2/hr at 50 Pascal’s, and constructed without a central heating system. Physical IAQ measurements and occupant interviews were conducted during the summer and winter months over a 24-hour period, to gain information on occupant activities, perception of the interior environment, building-related health and building use. Findings – The results suggest inadequate IAQ and perceived thermal comfort, insufficient use of purge ventilation, presence of fungal growth, significant variances in heating patterns, occurrence of sick building syndrome symptoms and issues with the MVHR system. Practical implications – The findings will provide relevant data on the applicability of airtight, mechanically ventilated homes in a UK climate, with particular reference to IAQ. Originality/value – IAQ data of this nature is essentially lacking, particularly in the UK context. The findings will aid the development of effective sustainable design strategies that are appropriate to localized climatic conditions and sensitive to the health of building occupants.

A study on the change of indoor air quality (IAQ) and health score measurement according to amount of indoor plants in the elementary school classrooms

A study on the change of indoor air quality (IAQ) and health score measurement according to amount of indoor plants in the elementary school classrooms

Indoor air quality and thermal comfort evaluation in a Spanish modern low-energy office with thermally activated building systems

In the current context of a world energy situation that demands high-quality indoor environments compatible with rational energy use, the purpose of this work is to present a successful case study of a comfortable low-energy office building in Madrid, Spain. An exhaustive indoor air quality and thermal comfort field measurement survey was carried out during the summer period. The main global and local thermal comfort parameters in several workplaces, as well as CO2 concentration in supply air, exhaust air, and occupied space, were registered. Correct operation of the demand-controlled ventilation system and air distribution is observed. Also, thermally activated building systems and shading design make it possible to get high levels of indoor thermal comfort, as derived from measurements. This proves that the integration of novel energy-efficient concepts in office building design can not only contribute to a minimization of the energy use but can simultaneously favor the achievement of high indoor environmental quality.

Children’s Health and Indoor Air Quality in Primary Schools and Homes in Portugal—Study Design

The main aim of the research project “On the Contribution of Schools to Children’s Overall Indoor Air Exposure” is to study associations between adverse health effects, namely, allergy, asthma, and respiratory symptoms, and indoor air pollutants to which children are exposed to in primary schools and homes. Specifically, this investigation reports on the design of the study and methods used for data collection within the research project and discusses factors that need to be considered when designing such a study. Further, preliminary findings concerning descriptors of selected characteristics in schools and homes, the study population, and clinical examination are presented. The research project was designed in two phases. In the first phase, 20 public primary schools were selected and a detailed inspection and indoor air quality (IAQ) measurements including volatile organic compounds (VOC), aldehydes, particulate matter (PM2.5, PM10), carbon dioxide (CO2), carbon monoxide (CO), bacteria, fungi, temperature, and relative humidity were conducted. A questionnaire survey of 1600 children of ages 8–9 years was undertaken and a lung function test, exhaled nitric oxide (eNO), and tear film stability testing were performed. The questionnaire focused on children’s health and on the environment in their school and homes. One thousand and ninety-nine questionnaires were returned. In the second phase, a subsample of 68 children was enrolled for further studies, including a walk-through inspection and checklist and an extensive set of IAQ measurements in their homes. The acquired data are relevant to assess children’s environmental exposures and health status.

IoT 기반 실내 공기질 모니터링 시스템

Recently, The World Health Organization announced that harms human health because of air pollution that are emerging as threats to human health worldwide. according to the, Seoul, 2011 According to a July 2014 - Public Facilities indoor air quality measurements, were examined to be in violation of indoor air pollution standards in most multi-use facility. Indoor air pollution resulting from this is present in the paper, and cause disease, such as pulmonary disease, asthma, bronchitis and to In this connection, the measurement of indoor air quality by using the environment sensor, analyzing the measured data to generate an actuator signal required for ventilation and improve indoor air quality by implementing a monitoring system with real-time measurement, autonomously managing the air quality in our lives so that it can be.

Case study investigation of indoor air quality in mechanically ventilated and naturally ventilated UK social housing

There is a significant lack of indoor air quality research in low energy homes. This study compared the indoor air quality of eight newly built case study homes constructed to similar levels of air-tightness and insulation; with two different ventilation strategies (four homes with Mechanical Ventilation with Heat Recovery (MVHR) systems/Code level 4 and four homes naturally ventilated/Code level 3). Indoor air quality measurements were conducted over a 24 h period in the living room and main bedroom of each home during the summer and winter seasons. Simultaneous outside measurements and an occupant diary were also employed during the measurement period. Occupant interviews were conducted to gain information on perceived indoor air quality, occupant behaviour and building related illnesses. Knowledge of the MVHR system including ventilation related behaviour was also studied. Results suggest indoor air quality problems in both the mechanically ventilated and naturally ventilated homes, with significant issues identified regarding occupant use in the social homes.

Association between respiratory health and indoor air pollution exposure in Canakkale, Turkey

Indoor air quality (IAQ) measurements were conducted in three different towns (i.e. Centre, Lapseki, and Can) in Canakkale, Turkey (n = 121) throughout the year. All indoor environments were selected randomly among the volunteer participants of a previous health survey. Particulate matter (PM), Total Volatile Organic Compounds (TVOCs), Total Bacteria Concentration (TBC), Total Mold Concentration (TMC), and Carbon dioxide (CO2) together with temperature and relative humidity (RH) were measured monthly. Together with IAQ measurements, bronchial hyper-responsiveness indicators such as forced vital capacity (FVC) and forced expiration volume (FEV1) of the occupants of the homes were measured by monthly Pulmonary Function (PF) test. Furthermore, a comprehensive survey was given to the participants. The measured IAQ parameters showed seasonal and spatial variations (p < 0.05). Among them, the highest levels of TVOC, CO2, and PM were found in the winter, while the highest levels of both TBC and TMC were found in the summer. In general, levels of IAQ parameters and asthma prevalence were the highest in Can (i.e. industrial area). Also, IAQ adversely influenced the respiratory health of participants in Can (p < 0.05). Shortness of breath was the most prominent respiratory symptom. Negative associations between asthma and FEV1/FVC ratio, and between respiratory symptom score (RSS) and FEV1/FVC, support the idea that the PF test can be a good indicator for (early) prognosis of respiratory diseases.

Indoor air quality in green buildings: A case-study in a residential high-rise building in the northeastern United States

Improved indoor air quality (IAQ) is one of the critical components of green building design. Green building tax credit (e.g., New York State Green Building Tax Credit (GBTC)) and certification programs (e.g., Leadership in Energy & Environmental Design (LEED)) require indoor air quality measures and compliance with allowable maximum concentrations of common indoor air pollutants. It is not yet entirely clear whether compliance with these programs results in improved IAQ and ultimately human health. As a case in point, annual indoor air quality measurements were conducted in a residential green high-rise building for five consecutive years by an industrial hygiene contractor to comply with the building's GBTC requirements. The implementation of green design measures resulted in better IAQ compared to data in references of conventional homes for some parameters, but could not be confirmed for others. Relative humidity and carbon dioxide were satisfactory according to existing standards. Formaldehyde levels during four out of five years were below the most recent proposed exposure limits found in the literature. To some degree, particulate matter (PM) levels were lower than that in studies from conventional residential buildings. Concentrations of Volatile Organic Compounds (VOCs) with known permissible exposure limits were below levels known to cause chronic health effects, but their concentrations were inconclusive regarding cancer health effects due to relatively high detection limits. Although measured indoor air parameters met all IAQ maximum allowable concentrations in GBTC and applicable LEED requirements at the time of sampling, we argue that these measurements were not sufficient to assess IAQ comprehensively because more sensitive sampling/analytical methods for PM and VOCs are needed; in addition, there is a need for a formal process to ensure rigor and adequacy of sampling and analysis methods. Also, we suggest that a comprehensive IAQ assessment should include mixed mode thermal comfort models, semi-volatile organic compounds, assessment of new chemicals, and permissible exposure levels of many known indoor VOCs and bioaerosols. Plus, the relationship between energy consumption and IAQ, and tenant education on health effects of indoor pollutants and their sources may need more attention in IAQ investigations in green buildings.

EnergyPlus and CHAMPS-Multizone co-simulation for energy and indoor air quality analysis

This paper presents a co-simulation method using EnergyPlus and CHAMPS-Multizone for combined energy efficiency and indoor air quality (IAQ) analysis. The energy simulation estimates the energy consumption of HVAC systems, lights, and electrical equipment. The Indoor Environmental Quality (IEQ) simulation predicts the indoor contaminate concentrations for IAQ, the zone air temperature and relative humidity for controlled zone conditions, the Predicted Mean Vote (PMV) and Predicted Percentage Dissatisfied (PPD) for thermal comfort, and the illumination for daylighting performance. The energy, thermal comfort, and daylighting simulation are performed by EnergyPlus while the CHAMPS-Multizone is used for the IAQ simulation. In each time step, the CHAMPS-Multizone simulates the pollutant balance, and the ventilation rate required to control the contaminant concentrations under pre-established threshold values. EnergyPlus uses the ventilation rate to simulate the heat, air, and moisture balance, and the energy and daylighting performance. The Building Controls Virtual Test Bed is used for the run-time data exchange. Simulation cases using a 3-zone building are used to validate and demonstrate the benefit of the method. The co-simulation model is developed and implemented in a Virtual Design Studio (VDS) software framework with graphical user interface for integrated building system design. The co-simulation method is found to be especially useful in analyzing the interaction between IAQ and energy efficiency measures.

Indoor air-quality investigation in code for sustainable homes and passivhaus dwellings

Purpose– Energy efficient building design strategies are growing in popularity, promoted through increased awareness of climate change, rising energy prices, global consciousness and a demand for energy security. To aid this design process, assessment tools such as Code for Sustainable Homes (CSHs) and Passivhaus were introduced in the UK. However, it is suggested that these tools prioritise energy efficiency over occupant health through a fundamental lack of attention to indoor air quality (IAQ). The purpose of this paper is to investigate IAQ in selected dwellings built using CSHs level 6, level 3 and Passivhaus homes in the UK.Design/methodology/approach– Using a case study approach, the investigation consisted of IAQ measurements during summer and winter months, occupant diaries and occupant interviews.Findings– The results from the IAQ measurements show the recommended maximum level of 1,000 ppm was breached in all three Code 6 and two Code 3 homes, with levels slightly below this limit in the two Passivhaus homes. Measurements found high levels of formaldehyde, carbon dioxide and low levels of relative humidity.Practical implications– There is a need for the adequate consideration of IAQ in sustainable assessment methods, including the use of mandatory credits to ensure occupant health is not disregarded in the drive towards zero carbon.Originality/value– These results can be used to recognise areas of improvement in the CSHs and Passivhaus standard, and the design of energy efficient homes in general. Research of this nature is essential to ensure occupant health is not sacrificed through the drive towards zero carbon.

Indoor environmental quality in chemistry and chemical engineering laboratories at Izmir Institute of Technology

Indoor air pollution in university research laboratories may be important to building occupants, especially for those who work in the laboratories. In this study, indoor air quality (IAQ) and indoor environmental comfort were investigated in research laboratories of two departments at a university. PM2.5, PM10, TVOC (total volatile organic compounds), and CO concentrations, and three comfort variables which are temperature, relative humidity, and CO2 were measured. PM2.5 concentration was determined gravimetrically by collecting particles on glass fiber filters, whereas the remaining pollutants and comfort variables were measured using a monitoring device. IAQ measurements showed that levels of all pollutants were under the limits in both of the departments except for TVOC in one laboratory which had a mean concentration of 182ppb. The comfort variables were in the comfort ranges for laboratories in both of the departments except for temperature in one laboratory with a mean value of 30 °C. In conclusion, measures are needed for extensive uses of organic solvents because ventilation may not be sufficient to keep VOC concentrations within the limits, and to provide thermal comfort.

Understanding the role of inhabitants in innovative mechanical ventilation strategies

The causes and implications are explored for why some inhabitants choose to avoid or abandon usage of their mechanical ventilation system. Over half of respondents in four LEED-certified high-rise residential buildings in Toronto, Canada, were found not to use their heat recovery ventilators (HRV). Questionnaire scores, comments and interview results found the following reasons: acoustic dissatisfaction, difficulty with the accessibility of filters, inhabitant knowledge and preferences, and lack of engagement with training materials. A disconnect also exists between the expectations of designers and the thinking and behaviours of inhabitants. The implications of inhabitants' ventilation behaviours were also explored though metered energy data as well as noise and indoor air quality (IAQ) measurements within their dwellings. Results suggest that abandoning mechanical ventilation in favour of passive ventilation can actually lead to greater satisfaction with IAQ and to decreased energy consumption. It is recommended that designers employ resilient design strategies that allow for varied preferences (e.g., for passive ventilation) to be exercised by inhabitants without undermining suite- or building-level performance. The study also highlights the importance of using post-occupancy evaluation methodology to understand how inhabitants interact with (new) technology in order to optimize performance and satisfaction in high-rise residential buildings.

Indoor environmental and air quality characteristics, building-related health symptoms, and worker productivity in a federal government building complex

ABSTRACTBuilding Health Sciences, Inc. (BHS), investigated environmental conditions by many modalities in 71 discreet areas of 12 buildings in a government building complex that had experienced persistent occupant complaints despite correction of deficiencies following a prior survey. An online health survey was completed by 7,637 building occupants (49% response rate), a subset of whom voluntarily wore personal sampling apparatus and underwent medical evaluation. Building environmental measures were within current standards and guidelines, with few outliers. Four environmental factors were consistently associated with group-level building-related health complaints: physical comfort/discomfort, odor, job stress, and glare. Several other factors were frequently commented on by participants, including cleanliness, renovation and construction activities, and noise. Low relative humidity was significantly associated with lower respiratory and “sick building syndrome”-type symptoms. No other environmental conditions (including formaldehyde, PM10 [particulate matter with an aerodynamic diameter <10 μm], or mold levels, which were tested by 7 parameters) correlated directly with individual health symptoms. Indicators of atopy or allergy (sinusitis, allergies, and asthma), when present singly, in combinations of 2 conditions, or together, were hierarchically associated with the following: increased absence, increased presenteeism (presence at work but at reduced capacity), and increase in reported symptom-days, including symptoms not related to respiratory disease. We found that in buildings without unusual hazards and with environmental and air quality indicators within the range of acceptable indoor air quality standards, there is an identifiable population of occupants with a high prevalence of asthma and allergic disease who disproportionately report discomfort and lost productivity due to symptoms and that in “normal” buildings these outcome indicators are more closely associated with host factors than with environmental conditions. We concluded from the experience of this study that building-related health complaints should be investigated at the work-area level and not at a building-wide level. An occupant-centric medical evaluation should guide environmental investigations, especially when screening results of building indoor environmental and air quality measurements show that the building and its work areas are within regulatory standards and industry guidelines.

리모델링 학교 및 신축학교 실내공기질 측정과 대책

리모델링 학교 및 신축학교 실내공기질 측정과 대책

Evaluation Of Temperature And Humidity Regime In An Orthodox Church

This study describes the cult buildings, properties and specifics of the cult building microclimate-related problems, based on the statutory requirements, also considering optimal parameters of the air. This study presents the results of indoor air monitoring in the cult building. The proposed methodology was evaluated in Riga All Saints Orthodox Church. During the evaluation, practical measurements of indoor air quality were taken. The recommendations for improvement of temperature/ moisture conditions were presented.