Hydrophobic Substances Research Articles

Preparation and characterization of gliadin-based core-shell microcapsules by three antisolvent approaches

Gliadin, a versatile wheat-derived protein, has great potential in the creation of nanostructured delivery systems for encapsulating various hydrophobic bioactive substances. Despite gliadin's well-established potential in creating nanostructured delivery systems for hydrophobic substances, its utilization for encapsulating hydrophilic compounds remains a relatively unexplored domain. This study investigated the feasibility of preparing gliadin-based core-shell microcapsules using different antisolvent methods and assessed their controlled release capabilities for hydrophilic compounds. It employed three commonly used food polysaccharides, alginate, κ-carrageenan, and agar, as hydrophilic microbeads and selected thiamine and ethyl maltol as model compounds. The microcapsules were constructed by two steps: 1) The microbeads were prepared by a water-in-oil emulsion template under different gelling conditions; 2) The microbeads were dispersed into aqueous ethanol/urea/acetic acid gliadin solutions, during which the slow migration of water from inside the microbeads to the outer gliadin solution decreased the solubility of gliadin and promoted the deposition of gliadin onto the surface of the microbeads, finally leading to the formation of the core-shell structure. The resulting core-shell microcapsules exhibited adjustable particle sizes from 80.0 to 850.0 μm in diameter and shell thickness ranging from 8.0 to 30.0 μm. Moreover, the microcapsules exhibited controlled release behavior for hydrophilic compounds, with only 20.0% of thiamine being released after 90 min, and this release rate can be finely tuned by controlling the shell thickness. These gliadin-based core-shell microcapsules are considered as promising carriers for the controlled delivery of hydrophilic compounds.

Enhancing encapsulation of curcumin by pH-driven and sodium alginate blending with ovalbumin as a carrier

Curcumin is a hydrophobic polyphenol with various health benefits, but its poor water solubility and stability limit its application in the food and pharmaceutical industries. In this study, a pH-driven method was developed to prepare ovalbumin (OVA)-curcumin nanocomplexes without organic solvents, reducing the environmental impact. The results showed that curcumin was encapsulated in OVA with a high efficiency of over 95% and remained in an amorphous state within the protein molecules. Molecular docking and spectroscopic analyses revealed that curcumin was mainly bound and stabilized by hydrogen bonds and hydrophobic interactions in the hydrophobic core of OVA. The binding strength of the intermediate stage of the pH-driven method was stronger than that of the final stage, due to the exposure of OVA molecular binding sites and the involvement of electrostatic attraction. Furthermore, the potential of polysaccharide blending to enhance the stability of the nanocomplexes was investigated. The results showed that sodium alginate effectively enhanced the photostability and thermal stability of the OVA-curcumin nanocomplexes by co-solubilization and electrostatic complex formation. In addition, simulated in vitro digestion also demonstrated that the pH-driven method combined with polysaccharide blending increased the bioaccessibility of curcumin in nanocomplexes from 17.79% to 52.54%. Therefore, the pH-driven method coupled with polysaccharide blending ensures the encapsulation and stabilization of hydrophobic bioactive substances for use in their delivery systems to improve bioaccessibility.

Bioactive Composite Cryogels Based on Poly (Vinyl Alcohol) and a Polymacrolactone as Tissue Engineering Scaffolds: In Vitro and In Vivo Studies.

In light of the increasing resistance of pathogenic microorganisms to the action of antibiotics, essential oils extracted from plants with therapeutic activity provide a significant alternative to obtaining dressings for the treatment of skin wounds. The encapsulation of essential oils in an amphiphilic gel network allows better dispersion and preservation of hydrophobic bioactive substances while promoting their prolonged release. In this study, we focused on the development of a poly (vinyl alcohol) (PVA)/poly (ethylene brassylate-co-squaric acid) (PEBSA) platform embedded with thymol (Thy), and α-tocopherol (α-Tcp) as a co-drug structure with prospective use for the treatment and healing of skin wounds. The new complex bioactive system was prepared through repeated freeze-thaw processes. The influence of the composition on surface topography, hydrophilic/hydrophobic character, and in vitro interaction with simulated body fluids was evidenced. BALB/3T3 fibroblast cell culture demonstrated the cryogel scaffolds' cytocompatibility. Tests on Wistar rats confirmed their biocompatibility, integration with host tissue, and the absence of inflammatory processes. The bioactive compound significantly enhanced the healing process of full-thickness excision wounds in a rat model. Further investigations on in vivo infection models would assess the potential of the PVA/PEBSA platform with dual bioactive activity for clinical antimicrobial and wound healing therapy.

Improved encapsulation effect and structural properties of whey protein isolate by dielectric barrier discharge cold plasma

The whey protein isolate (WPI) was modified by dielectric barrier discharge cold plasma (DBD) in order to improve its encapsulation efficiency of rutin. In this work, the effect of DBD treatment on structure and physicochemical properties of WPI and the interaction between DBD-treated WPI and rutin were investigated. The results showed that the structural change of WPI leaded to the exposure of internal hydrophobic groups, increasing the interaction site with rutin. The encapsulation efficiency of DBD-treated WPI (30 kV, 30 s) on rutin was improved by 12.42 % compared with control group. The results of multispectral analysis showed that static quenching occurred in the process of interaction between DBD-treated and rutin, hydrogen bond and van der Waals force were the main forces between them. Therefore, DBD treatment can be used as a method to improve the encapsulation efficiency of WPI on hydrophobic active substances.

Encapsulation of Hydrophobic Bioactive Substances for Food Applications: Carriers, Techniques, and Biosafety

Biologically active substances (BASs) are used as novel ingredients to design functional foods. These functional foods are alternate approaches to treat or cure chronic diseases. However, the application of BASs is limited due to their hydrophobic nature, low bioavailability, sensitivity to gastric acid, and environmental conditions (i.e., high temperatures, radiation, pH, and oxygen). Thus, research has been channeled to find ways of curbing these limitations. This review provides an overview of the modern methods for BAS encapsulation, carrier classifications, benefits, and drawbacks as well as the biosafety of encapsulated BASs. Encapsulation of BASs into organic/inorganic carriers or composites overcomes the limitations mentioned above. In addition, encapsulation enables the controlled release of active compounds to target cells. The market for encapsulated foods has grown globally at a significant pace due to their various applications as functional foods, dietary supplements, and other products. It is estimated that by 2027, the market worth of encapsulated foods will be valued at $17 billion.

Hyaluronic Acid and Its Use for Skin Rejuvenation

The skin envelopes the total surface of the body and it is made up of the epidermis, an epithelial tissue of ectodermal origin; by dermis, a conjunctive tissue of mesodermal origin, which serves as sustainment and is responsible for its nutrition; and by the hypodermis or adipose tissue. This last one is a special type of conjunction in which there is a predominance of adipose cells (adipocytes), specialized in storing lipids in the form of triacylglycerol (TAG); non-polar, hydrophobic and water-insoluble substances. It embodies the organism's main energy reservoir. And its regulation ensues by nutrients and afferent signals of the neural and hormonal systems.

Research on the Influence of Heavy Pollution Environment on Hydrophobic Substances in Silicone Rubber Materials

Power load forecasting is very important for power dispatching. Accurate load forecasting is of great significance for saving energy, reducing generating costs, and improving social and economic benefits. In order to accurately predict the power load, based on BP neural network theory, combined with the advantages of Clementine in dealing with big data and preventing overfitting, a neural network prediction model for large data is constructed.

Soil water repellency in the Brazilian neotropical savanna: first detection, seasonal effect, and influence on infiltrability.

Soil water repellency (SWR) has been detected worldwide in various biomes and climates. However, this phenomenon has not been shown yet in the Brazilian neotropical savanna. The present study addressed the following questions: (a) Does SWR occur in the Brazilian neotropical savanna? If so, (b) does it exhibit seasonality? (c) Does it influence infiltration? To do that, we selected two similar study areas covered by similar soils (oxisol) and vegetation (netropical savanna). We performed water repellency and infiltration tests in both areas during the transition from dry to wet season. Our results indicate that SWR occurs in soils of the Brazilian neotropical savanna only during the dry season and influence water infiltration in the dry season. The likely cause of SWR might be related to the chemical composition of soil organic matter since neotropical savanna plants produce hydrophobic substances as a survival strategy, especially during the dry season.

Design of chlorella-inspired and smart-responsive bio-microspheres and their application in eco-friendly anti-biofouling coatings

Anti-biofouling coating materials have attracted much attention for their diverse functionality and extensive applications in various fields, such as marine facilities, biomedical apparatus, and so on. However, it is still a huge challenge for long-term anti-fouling coatings to improve the durability, safety, sustainability, eco-friendliness, and biodiversity. Herein, a novel biomimetic coating (Bio-OHMP coating) with eco-friendly and anti-biofouling performance was constructed on the basis of chlorella-inspired amino silicone oil (ASO)-core/polydopamine-shell bio-microspheres (Bio-OHMP microspheres). The Bio-OHMP microspheres were successfully fabricated through combining the hard/soft templates with high-stored hydrophobic substance. Similar to chlorella, great substance storage and delivery function were achieved for the Bio-OHMP microspheres, attributing to the larger central cavity structure of hollow mesoporous polydopamine microspheres (HMP microspheres) and the easy acquisition of NIR/Acid/Base smart-responsive self-healing properties of the Bio-OHMP microspheres. Superhydrophobic properties of the Bio-OHMP coating were originated from the hydrophobic and rough micro/nano-structured Bio-OHMP microspheres and nanoparticles. NIR/Acid/Base smart-responsive characteristics and long-termed superhydrophobic self-healing properties of the Bio-OHMP coating were gained due to the multiple-responsive Bio-OHMP microspheres, and the coating was endowed with high-efficient and large-scale healing abilities. Besides, great anti-biofouling abilities to typical biological or organic contaminants and long-period superhydrophobicity under harsh environments of the Bio-OHMP coating were all confirmed. This novel and multifunctional Bio-OHMP coating shows great prospects in anti-fouling, anti-adhesion, or other fields, while the chlorella-inspired Bio-OHMP microspheres have great potentials to be applied to other functionalized materials.

Structural and Morphological Features of Anisotropic Chitosan Hydrogels Obtained by Ion-Induced Neutralization in a Triethanolamine Medium.

For the first time, anisotropic hydrogel material with a highly oriented structure was obtained by the chemical reaction of polymer-analogous transformation of chitosan glycolate-chitosan base using triethanolamine (TEA) as a neutralizing reagent. Tangential bands or concentric rings, depending on the reaction conditions, represent the structural anisotropy of the hydrogel. The formation kinetics and the ratio of the positions of these periodic structures are described by the Liesegang regularities. Detailed information about the bands is given (formation time, coordinate, width, height, and formation rate). The supramolecular ordering anisotropy of the resulting material was evaluated both by the number of Liesegang bands (up to 16) and by the average values of the TEA diffusion coefficient ((15-153) × 10-10 and (4-33) × 10-10 m2/s), corresponding to the initial and final phase of the experiment, respectively. The minimum chitosan concentration required to form a spatial gel network and, accordingly, a layered anisotropic structure was estimated as 1.5 g/dL. Morphological features of the structural anisotropic ordering of chitosan Liesegang structures are visualized by scanning electron microscopy. The hemocompatibility of the material obtained was tested, and its high sorption-desorption properties were evaluated using the example of loading-release of cholecalciferol (loading degree ~35-45%, 100% desorption within 25-28 h), which was observed for a hydrophobic substance inside a chitosan-based material for the first time.

Enhancing stability of Pickering emulsions: Insights into the interfacial dynamics of Zein-MCT composite nanoparticles

The interfacial adsorption properties of colloidal particles were critical to the formation and stability of Pickering emulsions. This study aimed to improve the surface hydrophobicity, adsorption properties of Zein nanoparticles (ZN) by using the hydrophobic substance Medium-chain triglyceride (MCT) to form hybrid nanoparticles (ZMN). We investigated the impact of varying Zein/MCT ratios on the interfacial stabilization mechanism of Pickering emulsions and deciphered the relationship between adsorption properties, the rheological behavior of interfacial layer, and emulsion stability. Results revealed that the surface hydrophobicity of nanoparticles affected their adsorption properties as well as the rheological behavior of the composite interface. Specifically, an increase in the Zein/MCT ratio promoted the exposure of hydrophobic groups, increased the surface hydrophobicity of ZMN. This further led to an enhanced diffusion ZMN from the aqueous phase to the interface (Kdiff increased from 0.033 mNm−1s−0.5 to 0.095 mNm−1s−0.5) and the rate of rearrangement at the interface (KR increased from −0.016 mNm−1s−0.5 to −0.009 mNm−1s−0.5) which resulted in rapid adsorption and densely accumulation of ZMN at the interface. Furthermore, the adsorption properties of the nanoparticles directly influenced the viscoelastic and strain properties of the interfacial layer. The interfacial layer composed of ZMN exhibited enhanced viscoelasticity, increasing from 4 mN/m to 7 mN/m at low frequencies and from 6.8 mN/m to 12.5 mN/m at high frequencies. It also exhibited lower viscous dissipation and a stronger deformation response under varying external pressures. As a consequence, the rate and extent of droplet aggregation in ZMN stabilized emulsions (ZMNPEs) were reduced, attributing to the high viscoelasticity as well as the strong strain response of the interfacial layer. This research not only introduces a novel strategy to enhance the stability of Pickering emulsions using Zein-MCT composite nanoparticles, but also deepens our understanding of the interplay between particle adsorption properties, interfacial rheology, and emulsion stability.

Effect of hesperidin on deltamethrin toxicity in rat periodontal membrane

Aim: Deltamethrin (DM), a hydrophobic and lipophilic substance used for insect control, easily accumulates in the body, increasing ROS production and causing mucosal inflammation and damage. The aim of this study was to explore the prophylactic effects of hesperidin on DM toxicity in periodontal membrane. Methods: The study was conducted for 14 days on 21 male Wistar albino rats. The experimental animals were divided into three groups (n=7): The Sham group received 0.9% NaCl (1 mL). The deltamethrin group received 0.5 mg/kg DM (1 mL, dissolved in dimethyl sulfoxide). The deltamethrin + hesperidin group received DM (0.5 mg/kg) + hesperidin (100 mg/kg) (both drugs dissolved in 1 mL dimethyl sulfoxide). All treatments were administered daily via the orogastric route for 14 days. At the end of the experiment, the rats were euthanized by cervical dislocation, and biochemical and histological analyses were performed. Results: The biochemical tests showed significantly higher malondialdehyde (MDA) levels in the deltamethrin group than in the Sham group. Combined application of hesperidin and deltamethrin resulted in significantly lower MDA levels in the deltamethrin + hesperidin group than in the deltamethrin group. Histopathological examination of the periodontal tissues of the deltamethrin group revealed cell degeneration at the alveolar bone-tooth junction, including atypical cells, irregularity in collagen fibers, dilatation and congestion of the blood vessels, and inflammatory cell infiltrates distributed in aggregate and solitary forms. The deltamethrin + hesperidin group showed substantially less cell degeneration. Conclusion: Hesperidin application helped alleviate deltamethrin toxicity by preventing oxidative stress and reducing cell degeneration. How to cite this article: İpek F, Deveci E, İpek P. Effect of hesperidin on deltamethrin toxicity in rat periodontal membrane. J Med Dent Invest 2023;4:e230332. https://doi.org/10.5577/jomdi.e230332 Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.

Determination of the critical pH for unfolding water-soluble cod protein and its effect on encapsulation capacities

Hydrophobic polyphenols, with a variety of physiological activities, are often practically limited due to their low water solubility and chemical instability, among which curcumin (Cur) is a representative hydrophobic polyphenol. To improve Cur, the cod protein (CP)-Cur composite particles (CP-Cur) were successfully prepared using the pH-shift method, but this pH-shift method (7-12-7) required a higher pH, which limited application and increased cost. The critical pH of CP structure unfolding during pH-shift and its encapsulation effect on Cur were investigated in this paper. During the pH-shift process, the critical pH of the structural unfolding of CP was pH 10, and the degree of protein structure unfolding was higher, which was attributed to the increasing electrostatic repulsion, and the weakened hydrogen bond and hydrophobic interaction. The encapsulation efficiency of CP-Cur formed after pH 10-shift was higher than that formed after pH 9.8-shift, which increased by 22.17 %. At pH 9.8, the binding sites in CP reached saturation at the molar ratio of 10, while at pH 10 and 10.2, the binding sites in CP both reached saturation at the molar ratio of 14, also indicating that the protein treated with critical pH could bind more Cur. The binding between Cur and CP was mostly hydrophobic interaction, accompanied by hydrogen bonding and electrostatic interactions. The above results verified the necessity of critical pH in the experiment, indicating that critical pH could indeed improve the encapsulation effect and obtain a higher encapsulation efficiency. This work will help improve the large-scale application of hydrophobic functional substances in production.

Liposomes as Carriers of GHK-Cu Tripeptide for Cosmetic Application.

Liposomes are self-assembled spherical systems composed of amphiphilic phospholipids. They can be used as carriers of both hydrophobic and hydrophilic substances, such as the anti-aging and wound-healing copper-binding peptide, GHK-Cu (glycyl-L-histidyl-L-lysine). Anionic (AL) and cationic (CL) hydrogenated lecithin-based liposomes were obtained as GHK-Cu skin delivery systems using the thin-film hydration method combined with freeze-thaw cycles and the extrusion process. The influence of total lipid content, lipid composition and GHK-Cu concentration on the physicochemical properties of liposomes was studied. The lipid bilayer fluidity and the peptide encapsulation efficiency (EE) were also determined. Moreover, in vitro assays of tyrosinase and elastase inhibition were performed. Stable GHK-Cu-loaded liposome systems of small sizes (approx. 100 nm) were obtained. The bilayer fluidity was higher in the case of cationic liposomes. As the best carriers, 25 mg/cm3 CL and AL hydrated with 0.5 mg/cm3 GHK-Cu were selected with EE of 31.7 ± 0.9% and 20.0 ± 2.8%, respectively. The obtained results confirmed that the liposomes can be used as carriers for biomimetic peptides such as copper-binding peptide and that the GHK-Cu did not significantly affect the tyrosinase activity but led to 48.90 ± 2.50% elastase inhibition, thus reducing the rate of elastin degeneration and supporting the structural integrity of the skin.

Research on the Performance of Superhydrophobic Cement-Based Materials Based on Composite Hydrophobic Agents.

The utilization of a novel monolithic superhydrophobic cement material effectively prevents water infiltration and enhances the longevity of the material. A method for improving superhydrophobic concrete was investigated with the aim of increasing its strength and reducing its cost by compounding superhydrophobic substances with water repellents. The experimental tests encompassed the assessment of the compressive strength, contact angle, and water absorption of the superhydrophobic cementitious materials. The findings demonstrate that an increase in the dosage of isobutyltriethoxysilane (IBTES) progressively enhances the contact angle of the specimen, but significantly diminishes its compressive strength. The contact angle of SIKS mirrors that of SIS3, with a superior compressive strength that is 68% higher. Moreover, superhydrophobicity directly influences the water absorption of cementitious materials, with a more pronounced superhydrophobic effect leading to a lower water absorption rate. The water absorption of cementitious materials is influenced by the combined effect of porosity and superhydrophobicity. Furthermore, FT-IR tests unveil functional mappings, such as -CH3 which can reduce the surface energy of materials, signifying successful modification with hydrophobic substances.

Preparation of Uniform Nano Liposomes Using Focused Ultrasonic Technology.

Liposomes are microspheres produced by placing phospholipids in aqueous solutions. Liposomes have the advantage of being able to encapsulate both hydrophilic and hydrophobic functional substances and are thus important mediators used in cosmetics and pharmaceuticals. It is important for liposomes to have small sizes, uniform particle size distribution, and long-term stability. Previously, liposomes have been prepared using a homo mixer, microfluidizer, and horn and bath types of sonicators. However, it is difficult to produce liposomes with small sizes and uniform particle size distribution using these methods. Therefore, we have developed a focused ultrasound method to produce nano-sized liposomes with better size control. In this study, the liposome solutions were prepared using the focused ultrasound method and conventional methods. The liposome solutions were characterized for their size distribution, stability, and morphology. Results showed that the liposome solution prepared using focused ultrasonic equipment had a uniform particle size distribution with an average size of 113.6 nm and a polydispersity index value of 0.124. Furthermore, the solution showed good stability in dynamic light scattering measurements for 4 d and Turbiscan measurements for 1 week.

Coating carboxymethylpachymaran (CMP) on bovine serum albumin (BSA) nanoparticles for the encapsulation and oral delivery of curcumin

Curcumin is a hydrophobic substance with various beneficial biological activities. Its weak solubility and instability, however, now restrict its usage as a functional food. Herein, the purpose of this work is to fabricate curcumin-loaded bovine serum albumin/carboxymethylpachymaran nanoparticles (BMCNPs) to overcome these challenges. Under optimal conditions, the BMCNPs were spherically shaped with a surface charge of −31.4 mV, polydispersity index of 0.16 and particle size of 158.3 nm were characterized by electron microscopy and dynamic light scattering. The interactions between curcumin, bovine serum albumin (BSA), and carboxymethylpachymaran (CMP) were investigated. The BMCNPs had a much better curcumin encapsulation efficiency (74.1%) as well as strong antioxidant activity, storage stability, and ionic strength tolerance. The in vitro release revealed that curcumin was more successfully sustained in the small intestine stage (68.7%) and that BMCNPs were able to prevent it from releasing too early in the stomach (21.4%). Not to mention, the results of the cytotoxicity test performed on the HT-29 and IEC-6 cell lines demonstrated the acceptable biocompatibility of BMCNPs.

Preparation and characterization of particle-filled microgels by chemical cross-linking based on zein and carboxymethyl starch for delivering the quercetin

This work aimed to develop novel particle-filled microgels based on zein and carboxymethyl starch for delivering quercetin (Que). The anti-solvent precipitation and chemical cross-linking methods were combined to produce the zein-carboxymethyl starch particle-filled microgels (SM-Z). The critical finding of the study was that adding zein nanoparticles significantly improved the strength, water holding capacity, and thermal stability of carboxymethyl starch microgel (SM). Besides, SM-Z had good biodegradability, and the particle size was about 44–61 μm. SM-Z successfully encapsulated Que with a high encapsulation efficiency of 86.7 %. Que-loaded SM-Z (Q/SM-Z) significantly enhanced 30 d storage and UV light stability (up to 89.4 % retention rate) of Que than the Que-loaded SM (Q/SM). Q/SM-Z exhibited pH-responsive swelling behavior, and the swelling was greatest in the simulated intestinal fluid (pH = 7). Besides, the Q/SM-Z showed good stability in simulated gastric fluids and sustained release of Que in simulated intestinal fluids, 72.5 % Que was released at 8 h. During Que transport in Caco-2 cell monolayers, Q/SM (5.8 %) and Q/SM-Z (9.7 %) were significantly higher than free Que (1.93 %). Therefore, as an oral delivery system for hydrophobic active substances, SM-Z possesses good biodegradability and pH-responsive intestinal-targeted delivery capability, providing a new strategy for designing starch-based encapsulation materials.

Ultrasonic-antisolvent two-step assembly of carboxymethylated corn fiber gum-coated zein particles for enhanced curcumin delivery

Zein particles (ZPs) have garnered considerable interest in delivery system construction for its capacity to encapsulate hydrophobic substances. Nonetheless, the instability of ZPs is an obstacle to application. Coating carboxymethylated corn fiber gum (CMCFG) which is a modified polysaccharide molecule enriched with anionic groups on the surface of ZPs is expected to overcome this limitation. Here, we evaluated the cell viability of CMCFG to Caco-2, proving the safety of CMCFG with different substitution degree (0.42, 0.52 and 0.70) below 20 mg/mL. Furthermore, curcumin, a hydrophobic model compound, was loaded onto ZPs coated with CMCFG using ultrasonic-antisolvent method, achieving a remarkable encapsulation efficiency (91.19%) and enhanced stability and bioaccessibility. Multiple characteristic approaches, such as zeta potential, FTIR, XRD, ultraviolet absorption spectra revealed that the assembly process mainly relied on hydrophobic interactions and electrostatic interactions. This study provides novel insights into encapsulation methods for hydrophobic nutrients.

The effect of carrageenan-gluten ratio and garlic essential oil concentration on physical, mechanical, and antimicrobial properties of edible film

Edible film can be made from natural polymers, such as fats, proteins, and polysaccharides. The combination of polysaccharides and proteins has the potential to form a film, it can improve the mechanical properties and physical properties of the film based on the complex structure formed. Furthermore, to improve the barrier properties by obstructing water vapour transmission and preventing the proliferation of spoilage microorganisms in food, it is important to present both hydrophobic substances and active compounds extracted from essential oils. This research aimed to find out the best formulation of gluten and garlic essential oil on the physical, mechanical, and bacteria-inhibitory properties of edible film. The method used in this research is the edible film made by combining carrageenan and gluten in several concentrations (7,5%; 10%; and 12,5%) and the addition of garlic essential oil at different concentrations (0%, 2%, and 4%), then observations were made on several test parameters such as solubility in water, thickness, water vapor transmission rate, tensile strength, and antibacterial properties of the film. Results obtained in the research demonstrated that the finest edible film treatment was found in addition of 12.5% gluten and addition of 4% garlic essential oil with the results of solubility parameter of 40.57% thickness of 0.73 mm tensile strength of 0.0009 N/mm2 and WVTR of 21.856 g/h/m2 and antibacterial properties against E. coli bacteria of 26.93 mm and against S. aurerus bacteria of 33.76 mm. This research concluded the addition of gluten and garlic oil could improve physical, mechanical, and antimicrobial properties edible film.