Hydrophobic Moment Research Articles

Leishmania protein KMP-11 modulates cholesterol transport and membrane fluidity to facilitate host cell invasion.

The first step of successful infection by any intracellular pathogen relies on its ability to invade its host cell membrane. However, the detailed structural and molecular understanding underlying lipid membrane modification during pathogenic invasion remains unclear. In this study, we show that a specific Leishmania donovani (LD) protein, KMP-11, forms oligomers that bridge LD and host macrophage (MΦ) membranes. This KMP-11 induced interaction between LD and MΦ depends on the variations in cholesterol (CHOL) and ergosterol (ERG) contents in their respective membranes. These variations are crucial for the subsequent steps of invasion, including (a) the initial attachment, (b) CHOL transport from MΦ to LD, and (c) detachment of LD from the initial point of contact through a liquid ordered (Lo) to liquid disordered (Ld) membrane-phase transition. To validate the importance of KMP-11, we generate KMP-11 depleted LD, which failed to attach and invade host MΦ. Through tryptophan-scanning mutagenesis and synthesized peptides, we develop a generalized mathematical model, which demonstrates that the hydrophobic moment and the symmetry sequence code at the membrane interacting protein domain are key factors in facilitating the membrane phase transition and, consequently, the host cell infection process by Leishmania parasites.

Facile fabrication of luminescent ultra‐high molecular weight polyethylene fibers based on novel alkyl‐substituted 1,8‐naphthalimide fluorescent dyes

AbstractUltra‐high molecular weight polyethylene (UHMWPE) fiber, with excellent light resistance, and chemical resistance, is one of the most important high‐performance fibers. However, the high hydrophobicity and crystallinity make it difficult to color, restricting the development of colored fluorescent UHMWPE protection materials. In this study, three hydrophobic fluorescent dyes (NC4, NC8, NC16) for fluorescent dyeing of UHMWPE were developed by introducing alkyl substituents of different lengths (butyl, octyl, and hexadecyl) and polar cyano groups onto 4‐NH‐1,8‐naphthalimide fluorescent chromophore. The relationship between the structures and the application performance was studied, and theoretical calculations were combined to explore the influence of the substituents on the spatial and electronic effects of fluorescent dyes. With the extension of the alkyl chain, the dye‐uptake rate and building‐up property was enhanced, and the equilibrium dye‐uptake rates for NC4, NC8, and NC16 were 18.21%, 93.22%, and 62.96%, respectively. NC8, which was proven to have high hydrophobicity and maximum dipole moment, exhibited the highest dye‐uptake rate. The dyed UHMWPE fabrics exhibited strong yellow‐green fluorescence. This study provides a facile strategy for constructing luminescent UHMWPE protection materials.

Deletion within ameloblastin multitargeting domain reduces its interaction with artificial cell membrane

In human, mutations in the gene encoding the enamel matrix protein ameloblastin (Ambn) have been identified in cases of amelogenesis imperfecta. In mouse models, perturbations in the Ambn gene have caused loss of enamel and dramatic disruptions in enamel-making ameloblast cell function. Critical roles for Ambn in ameloblast cell signaling and polarization as well as adhesion to the nascent enamel matrix have been supported. Recentely, we have identified a multitargeting domain (MTD) in Ambn that interacts with cell membrane, with the majority enamel matrix protein amelogenin, and with itself. This domain includes an amphipathic helix (AH) motif that directly interacts with cell membrane. In this study, we analyzed the sequence of the MTD for evolutionary conservation and found high conservation among mammals within the MTD and particularly within the AH motif. We computationally predicted that the AH motif lost its hydrophobic moment upon deleting hydrophobic but not hydrophilic residues from the motif. Furthermore, we rationally designed peptides that encompassed the Ambn MTD and contained deletions of largely hydrophobic or hydrophilic stretches of residues. To assess their AH-forming and membrane-binding abilities, we combined those peptides with synthetic phospholipid membrane vesicles and performed circular dichroism, membrane leakage, and vesicle clearance measurements. Circular dichroism showed retention of α-helix formation in all peptides except the one with the largest deletion of eleven amino acids including seven that were hydrophobic. This same peptide variant failed to cause leakage or clearance of synthetic membranes, while smaller deletions yielded intermediate membrane interaction as measured by leakage and clearance assays. Our data revealed that deletion of key hydrophobic residues from the AH leads to the most dramatic loss of Ambn–membrane interaction. Pinpointing roles of residues within the MTD has important implications for the multifunctionality of Ambn.

A Critical Review of Short Antimicrobial Peptides from Scorpion Venoms, Their Physicochemical Attributes, and Potential for the Development of New Drugs.

Scorpion venoms have proven to be excellent sources of antimicrobial agents. However, although many of them have been functionally characterized, they remain underutilized as pharmacological agents, despite their evident therapeutic potential. In this review, we discuss the physicochemical properties of short scorpion venom antimicrobial peptides (ssAMPs). Being generally short (13-25 aa) and amidated, their proven antimicrobial activity is generally explained by parameters such as their net charge, the hydrophobic moment, or the degree of helicity. However, for a complete understanding of their biological activities, also considering the properties of the target membranes is of great relevance. Here, with an extensive analysis of the physicochemical, structural, and thermodynamic parameters associated with these biomolecules, we propose a theoretical framework for the rational design of new antimicrobial drugs. Through a comparison of these physicochemical properties with the bioactivity of ssAMPs in pathogenic bacteria such as Staphylococcus aureus or Acinetobacter baumannii, it is evident that in addition to the net charge, the hydrophobic moment, electrostatic energy, or intrinsic flexibility are determining parameters to understand their performance. Although the correlation between these parameters is very complex, the consensus of our analysis suggests that there is a delicate balance between them and that modifying one affects the rest. Understanding the contribution of lipid composition to their bioactivities is also underestimated, which suggests that for each peptide, there is a physiological context to consider for the rational design of new drugs.

A high hydrophobic moment arginine-rich peptide screened by a machine learning algorithm enhanced ADC antitumor activity.

Cell-penetrating peptides (CPPs) with better biomolecule delivery properties will expand their clinical applications. Using the MLCPP2.0 machine algorithm, we screened multiple candidate sequences with potential cellular uptake ability from the nuclear localization signal/nuclear export signal database and verified them through cell-penetrating fluorescent tracing experiments. A peptide (NCR) derived from the Rev protein of the caprine arthritis-encephalitis virus exhibited efficient cell-penetrating activity, delivering over four times more EGFP than the classical CPP TAT, allowing it to accumulate in lysosomes. Structural and property analysis revealed that a high hydrophobic moment and an appropriate hydrophobic region contribute to the high delivery activity of NCR. Trastuzumab emtansine (T-DM1), a HER2-targeted antibody-drug conjugate, could improve its anti-tumor activity by enhancing targeted delivery efficiency and increasing lysosomal drug delivery. This study designed a new NCR vector to non-covalently bind T-DM1 by fusing domain Z, which can specifically bind to the Fc region of immunoglobulin G and effectively deliver T-DM1 to lysosomes. MTT results showed that the domain Z-NCR vector significantly enhanced the cytotoxicity of T-DM1 against HER2-positive tumor cells while maintaining drug specificity. Our results make a useful attempt to explore the potential application of CPP as a lysosome-targeted delivery tool.

Relationship Between Biophysical Properties of Antimicrobial Peptides (AMPs) and their Associated Drug Efficacies

Antibiotic resistance is a growing global health threat. One consequence is that patients with cystic fibrosis (CF) are prone to developing antibiotic resistant lung infections caused by multiple strains of bacteria, including Pseudomonas aeruginosa. Due to the limited number of treatment options for patients with chronic antibiotic resistant infections, there is a need for finding new antibiotics that allow for effective eradication of bacterial infections, such as those in the CF lung. Many antimicrobial peptides (AMPs) have been annotated in databases and are considered as potential alternatives for current antibiotics. However, in many instances, the suitability of AMPs as drug molecules has not been extensively explored. Here, we propose that certain molecular properties of AMPs favor high antibiotic efficacy. Using information from AMP databases, we combined statistical analyses and machine learning techniques to identify relationships between various biophysical properties of AMPs and their drug efficacies. Analyses from classification and regression trees (CART) and random forests suggest that net charge and maximum average hydrophobic moment are the most important properties in determining if a peptide is useful against P. aeruginosa infections in CF patients. Maximum average hydrophobic residue, average alpha helix propensity score, hydrophobic proportion, and peptide length still contribute to this determination but to lesser degrees. Cation-pi interactions, on the other hand, do not appear to factor into this decision at all. Based on these properties, our current work is focused on designing and experimentally testing new peptides that may have activity against P. aeruginosa infections.

Hydrophobic sisal cellulose paper-based TENG for collecting rain energy and raindrop-based sensor

Hydrophobic Sisal cellulose paper (SCP) was obtained by surface modification of SCP via physical adsorbing polymer and chemical grafting monomer, respectively. The influence of surface modification conditioning on the hydrophobicity, dielectric constant and dipole moment of the SCP was investigated. The results showed that the hydrophobicity and dielectric constant of the modified SCP increased with the concentration and amount of the modifiers. The output electrical performance of the TENGs assembled by the two types of hydrophobic SCP for rain energy collection was compared. The output electrical performance of the chemically modified hydrophobic SCP-TENG is higher than that of the physical modified. The maximum power density of the former reaches 8.2 mW/m2. Furthermore, based on the linear relationship between the output performance (output voltage intensity and output current intensity) of hydrophobic SCP-TENG and the droplet velocity, a raindrop-based sensor based on hydrophobic SCP-TENG was successfully constructed and estimated.

Unlocking the specificity of antimicrobial peptide interactions for membrane-targeted therapies

Antimicrobial peptides (AMPs) are increasingly recognized as potent therapeutic agents, with their selective affinity for pathological membranes, low toxicity profile, and minimal resistance development making them particularly attractive in the pharmaceutical landscape. This study offers a comprehensive analysis of the interaction between specific AMPs, including magainin-2, pleurocidin, CM15, LL37, and clavanin, with lipid bilayer models of very different compositions that have been ordinarily used as biological membrane models of healthy mammal, cancerous, and bacterial cells. Employing unbiased molecular dynamics simulations and metadynamics techniques, we have deciphered the intricate mechanisms by which these peptides recognize pathogenic and pathologic lipid patterns and integrate into lipid assemblies. Our findings reveal that the transverse component of the peptide's hydrophobic dipole moment is critical for membrane interaction, decisively influencing the molecule's orientation and expected therapeutic efficacy. Our approach also provides insight on the kinetic and dynamic dependence on the peptide orientation in the axial and azimuthal angles when coming close to the membrane. The aim is to establish a robust framework for the rational design of peptide-based, membrane-targeted therapies, as well as effective quantitative descriptors that can facilitate the automated design of novel AMPs for these therapies using machine learning methods.

Design of a novel analogue peptide with potent antibiofilm activities against Staphylococcus aureus based upon a sapecin B-derived peptide

Nowadays, antimicrobial peptides are promising to confront the existing global crisis of antibiotic resistance. Here, a novel analogue peptide (mKLK) was designed based upon a D-form amidated sapecin B-derived peptide (KLK) by replacing two lysine residues with two tryptophan and one leucine by lysine, and inserting one alanine. The mKLK displayed superior amphipathic helixes in which the most of hydrophobic residues are confined to one face of the helix and had a higher hydrophobic moment compared with KLK. The mKLK retained its antibacterial activity and structure in human serum, suggesting its stability to proteolytic degradation. The values of MIC and MBC for mKLK were equal to those of KLK against clinical strains of methicillin-resistant Staphylococcus aureus (MRSA) and methicillin-susceptible Staphylococcus aureus (MSSA). However, mKLK showed more capability of in vitro inhibiting, eradicating, and dispersing MRSA and MSSA biofilms compared with KLK. Furthermore, a remarkable inhibitory activity of mKLK against MRSA and MSSA biofilms was seen in the murine model of catheter-associated biofilm infection. Results of this study show that mKLK not only exhibits antibacterial activity and serum stability but also a potent biofilm inhibitory activity at sub-MIC concentrations, confirming its potential therapeutic advantage for preventing biofilm-associated MRSA and MSSA infections.

Dynamic conformational changes of a tardigrade group-3 late embryogenesis abundant protein modulate membrane biophysical properties.

A number of intrinsically disordered proteins (IDPs) encoded in stress-tolerant organisms, such as tardigrade, can confer fitness advantage and abiotic stress tolerance when heterologously expressed. Tardigrade-specific disordered proteins including the cytosolic-abundant heat-soluble proteins are proposed to confer stress tolerance through vitrification or gelation, whereas evolutionarily conserved IDPs in tardigrades may contribute to stress tolerance through other biophysical mechanisms. In this study, we characterized the mechanism of action of an evolutionarily conserved, tardigrade IDP, HeLEA1, which belongs to the group-3 late embryogenesis abundant (LEA) protein family. HeLEA1 homologs are found across different kingdoms of life. HeLEA1 is intrinsically disordered in solution but shows a propensity for helical structure across its entire sequence. HeLEA1 interacts with negatively charged membranes via dynamic disorder-to-helical transition, mainly driven by electrostatic interactions. Membrane interaction of HeLEA1 is shown to ameliorate excess surface tension and lipid packing defects. HeLEA1 localizes to the mitochondrial matrix when expressed in yeast and interacts with model membranes mimicking inner mitochondrial membrane. Yeast expressing HeLEA1 shows enhanced tolerance to hyperosmotic stress under nonfermentative growth and increased mitochondrial membrane potential. Evolutionary analysis suggests that although HeLEA1 homologs have diverged their sequences to localize to different subcellular organelles, all homologs maintain a weak hydrophobic moment that is characteristic of weak and reversible membrane interaction. We suggest that such dynamic and weak protein-membrane interaction buffering alterations in lipid packing could be a conserved strategy for regulating membrane properties and represent a general biophysical solution for stress tolerance across the domains of life.

Structural and pKa Estimation of the Amphipathic HR1 in SARS-CoV-2: Insights from Constant pH MD, Linear vs. Nonlinear Normal Mode Analysis.

A comprehensive understanding of molecular interactions and functions is imperative for unraveling the intricacies of viral protein behavior and conformational dynamics during cellular entry. Focusing on the SARS-CoV-2 spike protein (SARS-CoV-2 sp), a Principal Component Analysis (PCA) on a subset comprising 131 A-chain structures in presence of various inhibitors was conducted. Our analyses unveiled a compelling correlation between PCA modes and Anisotropic Network Model (ANM) modes, underscoring the reliability and functional significance of low-frequency modes in adapting to diverse inhibitor binding scenarios. The role of HR1 in viral processing, both linear Normal Mode Analysis (NMA) and Nonlinear NMA were implemented. Linear NMA exhibited substantial inter-structure variability, as evident from a higher Root Mean Square Deviation (RMSD) range (7.30 Å), nonlinear NMA show stability throughout the simulations (RMSD 4.85 Å). Frequency analysis further emphasized that the energy requirements for conformational changes in nonlinear modes are notably lower compared to their linear counterparts. Using simulations of molecular dynamics at constant pH (cpH-MD), we successfully predicted the pKa order of the interconnected residues within the HR1 mutations at lower pH values, suggesting a transition to a post-fusion structure. The pKa determination study illustrates the profound effects of pH variations on protein structure. Key results include pKa values of 9.5179 for lys-921 in the D936H mutant, 9.50 for the D950N mutant, and a slightly higher value of 10.49 for the D936Y variant. To further understand the behavior and physicochemical characteristics of the protein in a biologically relevant setting, we also examine hydrophobic regions in the prefused states of the HR1 protein mutants D950N, D936Y, and D936H in our study. This analysis was conducted to ascertain the hydrophobic moment of the protein within a lipid environment, shedding light on its behavior and physicochemical properties in a biologically relevant context.

Hydrophobic moment drives penetration of bacterial membranes by transmembrane peptides

With antimicrobial resistance (AMR) remaining a persistent and growing threat to human health worldwide, membrane-active peptides are gaining traction as an alternative strategy to overcome the issue. Membrane-embedded multi-drug resistant (MDR) efflux pumps are a prime target for membrane-active peptides, as they are a well-established contributor to clinically relevant AMR infections. Here, we describe a series of transmembrane peptides (TMs) to target the oligomerization motif of the AcrB component of the AcrAB-TolC MDR efflux pump from Escherichia coli. These peptides contain an N-terminal acetyl-A-(Sar)3 (sarcosine; N-methylglycine) tag and a C-terminal lysine tag-a design strategy our lab has utilized to improve the solubility and specificity of targeting for TMs previously. While these peptides have proven useful in preventing AcrB-mediated substrate efflux, the mechanisms by which these peptides associate with and penetrate the bacterial membrane remained unknown. In this study, we have shown peptide hydrophobic moment (μH)-the measure of concentrated hydrophobicity on one face of a lipopathic α-helix-drives bacterial membrane permeabilization and depolarization, likely through lateral-phase separation of negatively-charged POPG lipids and the disruption of lipid packing. Our results show peptide μH is an important consideration when designing membrane-active peptides and may be the determining factor in whether a TM will function in a permeabilizing or non-permeabilizing manner when embedded in the bacterial membrane.

Replica Exchange with Hybrid Tempering Efficiently Samples PGLa Peptide Binding to Anionic Bilayer.

We evaluated the utility of a variant of the replica exchange method, a replica exchange with hybrid tempering (REHT), for all-atom explicit water biomolecular simulations and compared it with a more traditional replica exchange with the solute tempering (REST) algorithm. As a test system, we selected a 21-mer antimicrobial peptide PGLa binding to an anionic DMPC/DMPG lipid bilayer. Application of REHT revealed the following binding mechanism. Due to the strong hydrophobic moment, the bound PGLa adopts an extensive helical structure. The binding free energy landscape identifies two major bound states, a metastable surface bound state and a dominant inserted state. In both states, positively charged PGLa amino acids maintain electrostatic interactions with anionic phosphate groups by rotating the PGLa helix around its axis. PGLa binding causes an influx of anionic DMPG and an efflux of zwitterionic DMPC lipids from the peptide proximity. PGLa thins the bilayer and disorders the adjacent fatty acid tails. Deep invasion of water wires into the bilayer hydrophobic core is detected in the inserted peptide state. The analysis of charge density distributions indicated that peptide positive charges are nearly compensated for by lipid negative charges and water dipole ordering, whereas ions play no role in peptide binding. Thus, electrostatic interactions are the key energetic factor in binding cationic PGLa to an anionic DMPC/DMPG bilayer. Comparison of REHT and REST shows that due to exclusion of lipids from tempered partition, REST lags behind REHT in peptide equilibration, particularly, with respect to peptide insertion and helix acquisition. As a result, REST struggles to provide accurate details of PGLa binding, although it still qualitatively maps the bimodal binding mechanism. Importantly, REHT not only equilibrates PGLa in the bilayer faster than REST, but also with less computational effort. We conclude that REHT is a preferable choice for studying interfacial biomolecular systems.

How hydrophobicity shapes the architecture of protein assemblies

The interactions that give rise to protein self-assembly are basically electrical and hydrophobic in origin. The electrical interactions are approached in this study as the interaction between electrostatic dipoles originated by the asymmetric distribution of their charged amino acids. However, hydrophobicity is not easily derivable from basic physicochemical principles. Its treatment is carried out here considering a hydrophobic force field originated by “hydrophobic charges”. These charges are indices obtained experimentally from the free energies of transferring amino acids from polar to hydrophobic media. Hydrophobic dipole moments are used here in a manner analogous to electric dipole moments, and an empirical expression of interaction energy between hydrophobic dipoles is derived. This methodology is used with two examples of self-assembly systems of different complexity. It was found that the hydrophobic dipole moments of proteins tend to interact in such a way that they align parallel to each other in a completely analogous way to how phospholipids are oriented in biological membranes to form the well-known double layer. In this biological membrane model (BM model), proteins tend to interact in a similar way, although in this case this alignment is modulated by the tendency of the corresponding electrostatic dipoles to counter-align.Graphical abstractHelical conformation of influenza virus PDBid: 6Z5L. Two monomers are shown in cyan and green. The corresponding dipole moment vectors are shown in red (electric dipoles) and blue (hydrophobic dipoles). From the inset figure, it can be seen that the growth of the helix is due to electrical attraction of the monomers, overcoming a hydrophobic repulsion (see text)

Peptide Flexibility and the Hydrophobic Moment are Determinants to Evaluate the Clinical Potential of Magainins.

Using a flexibility prediction algorithm and in silico structural modeling, we have calculated the intrinsic flexibility of several magainin derivatives. In the case of magainin-2 (Mag-2) and magainin H2 (MAG-H2) we have found that MAG-2 is more flexible than its hydrophobic analog, Mag-H2. This affects the degree of bending of both peptides, with a kink around two central residues (R10, R11), whereas, in Mag-H2, W10 stiffens the peptide. Moreover, this increases the hydrophobic moment of Mag-H2, which could explain its propensity to form pores in POPC model membranes, which exhibit near-to-zero spontaneous curvatures. Likewise, the protective effect described in DOPC membranes for this peptide regarding its facilitation in pore formation would be related to the propensity of this lipid to form membranes with negative spontaneous curvature. The flexibility of another magainin analog (MSI-78) is even greater than that of Mag-2. This facilitates the peptide to present a kind of hinge around the central F12 as well as a C-terminal end prone to be disordered. Such characteristics are key to understanding the broad-spectrum antimicrobial actions exhibited by this peptide. These data reinforce the hypothesis on the determinant role of spontaneous membrane curvature, intrinsic peptide flexibility, and specific hydrophobic moment in assessing the bioactivity of membrane-active antimicrobial peptides.

Theoretical Analysis of the Role of Water in Ligand Binding to Cucurbit[n]uril of Different Sizes.

The role of water in host-ligand binding was investigated using a combination of molecular dynamics simulation and three-dimensional reference interaction site model theory. Three different hosts were selected (CB6, CB7, and CB8). Six organic molecules were used as representative ligands: dimethyl sulfoxide (DMSO), N,N-dimethylformamide (DMF), acetone, 2,3-diazabicyclo[2.2.2]oct-2-ene (DBO), cyclopentanone (CPN), and pyrrole. From the binding free energy and its components, we divided the ligands into two groups: those with relatively small molecular size (DMSO, DMF, acetone, and pyrrole) and those with relatively large molecular size (DBO and CPN). We established that the solvent water in the CB6 cavity can be completely displaced by small ligands, resulting in a greater binding affinity compared with larger CBs, except in the case of the small pyrrole ligand, due to outstanding intrinsic properties such as the relatively high hydrophobicity and low dipole moment. In the case of the large ligands, the solvent water can be displaced by DBO and CPN in both CB6 and CB7; there were similar tendencies in their binding affinities, with the greatest affinity in the CB7 complexes. However, the tendencies of the binding affinity components are completely different due to the difference between the complex structure and the solvation structure when a ligand binds with a CB structure. The binding affinities suggest that the size fit between the ligand and CB cannot guarantee the greatest binding affinity gain because the binding structure and intrinsic properties of CB and ligand equally play a crucial role.

Novel Helical Trp- and Arg-Rich Antimicrobial Peptides Locate Near Membrane Surfaces and Rigidify Lipid Model Membranes.

Antibiotics are losing effectiveness as bacteria become resistant to conventional drugs. To find new alternatives, antimicrobial peptides (AMPs) are rationally designed with different lengths, charges, hydrophobicities (), and hydrophobic moments (), containing only three types of amino acids: arginine, tryptophan, and valine. Six AMPs with low minimum inhibitory concentrations (MICs) and <25% toxicity to mammalian cells are selected for biophysical studies. Their secondary structures are determined using circular dichroism (CD), which finds that the % -helicity of AMPs depends on composition of the lipid model membranes (LMMs): gram-negative () inner membrane (IM) >gram-positive () > Euk33 (eukaryotic with 33 mol% cholesterol). The two most effective peptides, E2-35 (16 amino acid [AA] residues) and E2-05 (22 AAs), are predominantly helical in IM and LMMs. AMP/membrane interactions such as membrane elasticity, chain order parameter, and location of the peptides in the membrane are investigated by low-angle and wide-angle X-ray diffuse scattering (XDS). It is found that headgroup location correlates with efficacy and toxicity. The membrane bending modulus displays nonmonotonic changes due to increasing concentrations of E2-35 and E2-05 in and LMMs, suggesting a bacterial killing mechanism where domain formation causes ion and water leakage.

Rational design of stapled antimicrobial peptides.

The global increase in antimicrobial drug resistance has dramatically reduced the effectiveness of traditional antibiotics. Structurally diverse antibiotics are urgently needed to combat multiple-resistant bacterial infections. As part of innate immunity, antimicrobial peptides have been recognized as the most promising candidates because they comprise diverse sequences and mechanisms of action and have a relatively low induction rate of resistance. However, because of their low chemical stability, susceptibility to proteases, and high hemolytic effect, their usage is subject to many restrictions. Chemical modifications such as D-amino acid substitution, cyclization, and unnatural amino acid modification have been used to improve the stability of antimicrobial peptides for decades. Among them, a side-chain covalent bridge modification, the so-called stapled peptide, has attracted much attention. The stapled side-chain bridge stabilizes the secondary structure, induces protease resistance, and increases cell penetration and biological activity. Recent progress in computer-aided drug design and artificial intelligence methods has also been used in the design of stapled antimicrobial peptides and has led to the successful discovery of many prospective peptides. This article reviews the possible structure-activity relationships of stapled antimicrobial peptides, the physicochemical properties that influence their activity (such as net charge, hydrophobicity, helicity, and dipole moment), and computer-aided methods of stapled peptide design. Antimicrobial peptides under clinical trial: Pexiganan (NCT01594762, 2012-05-07). Omiganan (NCT02576847, 2015-10-13).

Use of scattering techniques to probe molecular interactions between novel Trp- and Arg-rich antimicrobial peptides (AMPs) in lipid model membranes (LMMs).

Antibiotics, one of the most important medical developments of the twentieth century, are losing effectiveness as diverse bacteria become resistant to standard and last resort commercial drugs. To address this challenge and provide alternatives to traditional antibiotics, we have rationally designed AMPs with different lengths, charges, hydrophobicities (H) and hydrophobic moments(µH). Five AMPs (out of 86) with the lowest minimum inhibitory concentrations (MICs) and <25% toxicity to mammalian cells were selected for biophysical studies. Their secondary structure was determined using circular dichroism (CD), which found that % α-helicity of AMPs depends on lipid composition. There was decreasing helicity with these LMMs: G(-) inner membrane (IM)> G(+) > Euk33 (eukaryotic with 33 mol% cholesterol). E2-35 (16-mer) and E2-05 (22-mer) are largely helical in G(-) IM LMM, (PE:PG:CL,7:2:1) and G(+) LMM (PG:DOTAP:PE:CL,6:1.5:1.5:1). LE-53 (12-mer) and LE-55 (16-mer) are mostly random coil when interacting with both G(-) IM and G(+) LMMs. The higher α-helical content of E2-35 and E2-05 correlated with a lower MIC and higher toxicity, suggesting that helicity is important for designing new AMPs. Other aspects of AMP/membrane interactions such as membrane elasticity, chain order parameter and location of the peptides in the membrane were investigated by low angle and wide angle x-ray diffuse scattering (XDS). A headgroup or interfacial location correlated with toxicity. The membrane bending modulus Kc displayed a non-monotonic change due to E2-35 and E2-05 perturbation in LMMs. The chain order parameter (Sxray) paralleled Kc in most cases. We suggest that juxtaposition of domains with different bending moduli could lead to leakage of ions and water along domain walls between softer and more rigid domains, thus killing the bacteria.

Lysine Acetylation Changes the Mechanism of Aβ25-35 Peptide Binding and Dimerization in the DMPC Bilayer.

The impact of Lys28 acetylation on Alzheimer's Aβ peptide binding to the lipid bilayer has not been previously studied, either experimentally or computationally. To probe this common post-translational modification, we performed all-atom replica exchange molecular dynamics simulations targeting binding and aggregation of acetylated acAβ25-35 peptide within the DMPC bilayer. Using the unmodified Aβ25-35 studied previously as a reference, our results can be summarized as follows. First, Lys28 acetylation strengthens the Aβ25-35 hydrophobic moment and consequently promotes the helical structure across the peptide extending it into the N-terminus. Second, because Lys28 acetylation disrupts electrostatic contact between Lys28 and lipid phosphate groups, it reduces the binding affinity of acAβ25-35 peptides to the DMPC bilayer. Accordingly, although acetylation preserves the bimodal binding featuring a preferred inserted state and a less probable surface bound state, it decreases the stability of the former. Third, acetylation promotes acAβ25-35 aggregation and eliminates monomers as thermodynamically viable species. More importantly, acAβ25-35 retains as the most thermodynamically stable the inserted dimer with unique head-to-tail helical aggregation interface. However, due to enhanced helix structure, this dimer state becomes less stable and is less likely to propagate into higher order aggregates. Thus, acetylation is predicted to facilitate the formation of low-molecular-weight oligomers. Other post-translational modifications, including phosphorylation and oxidation, reduce helical propensity and have divergent impact on aggregation. Consequently, acetylation, when considered in its totality, has distinct consequences on Aβ25-35 binding and aggregation in the lipid bilayer.