Hybrid Process Research Articles

Unraveling the origin of the wild pig (Sus scrofa Linnaeus, 1758) from the northwest Patagonian region: evidence of hybridization processes and a possible pure wild boar population in a protected area

Unraveling the origin of the wild pig (Sus scrofa Linnaeus, 1758) from the northwest Patagonian region: evidence of hybridization processes and a possible pure wild boar population in a protected area

Electro-coagulation pretreatment for improving nanofiltration membrane performance during reclamation of microplastic-contaminated secondary effluent: unexpectedly enhanced membrane fouling and mechanism analysis by MD-DFT simulation

The residue of microplastic in secondary effluent was inevitable with continuous aggravation on nanofiltration membrane fouling. Thus, this study aimed to further evaluate the applicability of electro-coagulation as pretreatment for improving the performance of a nanofiltration-oriented hybrid process during the reclamation of microplastic-contaminated secondary effluent. The electro-coagulation parameters were skillfully optimized and designed for following dynamic nanofiltration experiments. The potential influence of coagulants in different forms as well as their combined effects of microplastics on membrane fouling behaviors and pollutant rejection efficiency was distinguished. Specifically, terminal membrane permeability was reduced by 19% after 0.05 A electro-coagulation, while 0.2 A electro-coagulation almost eliminated the negative effects of microplastics. Mass transfer model analysis excluded the dominance of organic accumulation in the concentration polarization layer on membrane fouling development. Molecular dynamic (MD) simulation and egg-box model demonstrated that humic-Fe network possessed stronger bridging effects and greater porosity. This structure favored the co-deposition of other unlinked bacteria metabolites, which secretion was also facilitated by microplastics as immobilized carriers, on membrane surface. Additionally, density functional theory (DFT) calculation further confirmed that the greater demand for dehydration energy for ferric ions (1124 kcal/mol) inspired the formation of stronger humic-Fe complexes. Besides, residual microplastics in electro-coagulation effluent had different impacts on membrane rejection towards organic and inorganic pollutants, and it depended on the influenced cake-enhanced concentration polarization (CECP) by microplastic affinity with different pollutants.

Variogram models reconstruction for damaged ERT profiles

Reconstructing signals which are embedding spatial patterns such as Electrical resistivity tomography, is a process that should require to reconstruct first the spatial correlation of the damaged signals. This paper proposes an approach that implements an Unstationary Kriging (UNK) to reconstruct the experimental variogram of a damaged synthetic pseudo section within a set of pseudo sections coming from the same survey. We used and compared 02 other simple methods which are Linear Regression (LR) and Ordinary Kriging (OK), to test the hypothesis we formulate to link the experimental variograms coming from the same ERT survey. We implemented the UNK using Discrete Fourier Transforms (DFT) for trend modeling. After an implementation of the hybrid process (UNK) on 02 sets of data which are synthetics, we observed that the LR and the UNK methods present an interest. They both reconstruct signals with a +90% rate of accuracy, but when there is no structure or spatial correlation within the data, the LR is unstable. DFT was also tested alone for reconstruction but was mainly used in this study to help in computing the trends for each set of variographic signals. In the end, we conclude on an evidence that is: the proposed hybrid process is a promising way to reconstruct variographic signals, since we can improve it after more time invested to dig deep into the modeling of each of his components.

Tough Cortical Bone-Inspired Tubular Architected Cement-Based Material with Disorder.

Cortical bone is a tough biological material composed of tube-like osteons embedded in the organic matrix surrounded by weak interfaces known as cement lines. The cement lines provide a microstructurally preferable crack path, hence triggering in-plane crack deflection around osteons due to cement line-crack interaction. Inspired by this toughening mechanism and facilitated by a hybrid (3D-printing/casting) process, the study engineers architected tubular cement-based materials with the stepwise cracking toughening mechanism, that enables a non-brittle fracture. Using experimental and theoretical approaches, the study demonstrates the competition between tube size and shape on stress intensity factor from which engineering stepwise cracking can emerge. Two competing mechanisms, both positively and negatively affected by the growing tube size, arise to significantly enhance the overall fracture toughness by up to 5.6-fold compared to the monolithic brittle counterpart without sacrificing the specific strength. This is enabled by crack-tube interaction and engineering the tube size, shape, and orientation, which promotes rising resistance-curves (R-curve). "Disorder" curves and statistical mechanics parameters are proposed for the first time to quantitatively characterize the degree of disorder for describing the representation of the architected arrangement of materials in lieu of otherwise inadequate "periodicity" classification and misperceiveddisorder parameters (perturbation and Voronoi tessellation methods).

Ecomuseums in the Mediterranean Area and the Promotion of Sustainable Food Systems

In recent years, the growing interest in food as a central component of heritage preservation has been paired with a reflection on the sustainability of food systems. At the same time, place-based food governance has undergone processes of hybridization, opening up to a wider range of stakeholders. We argue that ecomuseums can positively contribute to the promotion of sustainable food systems that can preserve cultural heritage without undermining the development of healthy food systems. To discuss this hypothesis, we conducted an exploratory study to assess the current diffusion and food-related practices of ecomuseums in the Mediterranean area. Integrating the information of existing databases with online research of new institutions, we mapped a large sample of ecomuseums and carried out a Web Content Analysis. The main results of the research are a geolocalized map of Mediterranean ecomuseums and their activities and an index assessing their capacity to engage users on relevant topics through their webpages. The results highlight the existence of an unbalanced distribution of experiences, and the potential for growth, especially in the east and south of the Mediterranean countries.

Getting Down to Business: Governing the Hybridization of UK Charities

AbstractCharity organizations are important to solving complex social and environmental issues that are beyond the reach of government and commercial organizations. However, these organizations are under increasing pressure for survival due to a sharp decrease in their traditional sources of funding. This study examines how leaders of charity organizations can improve the financial security and impact of their organization by adopting commercial structures into their organization, and therefore undergoing a process of hybridization. We conducted a multiple comparative case study of 18 UK charities comparing how they engaged with emerging social finance funding opportunities that required them to adopt commercial structures which lay outside their dominant logic of action. We identified several aspects that influenced the likelihood of a charity organization to engage with this opportunity and, therefore, strategically hybridize. These included whether a charity executive had sufficient socialization in both the social and commercial logics to view social finance as a strategic opportunity and whether the organization could alter the role expectations of trustees with a commercial background to enable them to actively use both logics rather than compartmentalizing them in their decision‐making. Our findings have important implications for research streams on hybridization and hybrid governance.

Modeling and validation of purification of pharmaceutical compounds via hybrid processing of vacuum membrane distillation

This study provides an in-depth examination of forecasting the concentration of pharmaceutical compounds utilizing the input features (coordinates) r and z through a range of machine learning models. Purification of pharmaceuticals via vacuum membrane distillation process was carried out and the model was developed for prediction of separation efficiency based on hybrid approach. Dataset was collected from mass transfer analysis of process to obtain concentration distribution in the feed side of membrane distillation and used it for machine learning models. The dataset has undergone preprocessing, which includes outlier detection using the Isolation Forest algorithm. Three regression models were used including polynomial regression (PR), k-nearest neighbors (KNN), and Tweedie regression (TWR). These models were further enhanced using the Bagging ensemble technique to improve prediction accuracy and reduce variance. Hyper-parameter optimization was conducted using the Multi-Verse Optimizer algorithm, which draws inspiration from cosmological concepts. The Bagging-KNN model had the highest predictive accuracy (R2 = 0.99923) on the test set, indicating exceptional precision. The Bagging-PR model displayed satisfactory performance, with a slightly reduced level of accuracy. In contrast, the Bagging-TWR model showcased the least accuracy among the three models. This research illustrates the effectiveness of incorporating bagging and advanced optimization methods for precise and dependable predictive modeling in complex datasets.

Design and multi-objective optimization of hybrid process of membrane separation and electrochemical hydrogen pump for hydrogen production from biogas

A new hybrid process for hydrogen (H2) production that including membrane separation, electrochemical hydrogen pump (EHP) and steam methane reforming (SMR) was proposed. Firstly, the combination of two different membranes (PEO-CA) is applied to upgrade the biogas and capture CO2. Secondly, to avoid the toxic effect of CO on the EHP catalyst and, more importantly, to improve the H2 purity, the reforming reaction module is supplemented with water gas shift after the SMR. Finally, EHP is used to achieve high purity hydrogen. Simultaneously, the heat and power integration are considered to improve system efficiency. Sensitivity analysis, maximal information coefficient method and response surface methodology are applied to establish the correlation between objectives and parameters. Then, the second generation multi-objective non-dominated genetic algorithm (NSGA-II) is utilized to achieve minimum levelized cost of hydrogen (LCoH) and carbon emission per unit of hydrogen (ECO2). The optimized LCoH is 2.72 $/kgH2, and the ECO2 is 3.24 kgCO2e. Multi-stage membrane carbon capture process enhances CH4 conversion in SMR. The application of EHP reduces energy consumption and enhances hydrogen yield compared to PSA. The innovative use of membrane is hybridized with EHP to achieve the system intensification. The new hybrid process has a significant advantage in terms of ECO2 (37.45% reduction), although the price is higher compared to conventional biogas-to-hydrogen processes. Thus the new process is a promising low-carbon hydrogen production process from biogas.

Advanced Treatment: Tackling Paracetamol with Fenton Oxidation and Membrane Hybrid Processes

Paracetamol (PCT) in aquatic environments has become a global concern due to its potential harm to humans and environments. However, conventional water treatment was only able to degrade PCT partially. It was necessary to treat PCT contaminated water with tertiary technologies in particular by combination approach, such as Fenton oxidation and membrane filtration process. This combined approach enabling mitigation of large chemical footprint and iron residue associated with Fenton oxidation, as well as reducing fouling tendency of the membrane. The aim of this study was to evaluate the PCT removal efficiency by hybrid technology Fenton oxidation and membrane filtration. The membrane performance during the filtration process was also analyzed. As an important parameter for Fenton process, concentration of H 2 O 2 /Fe 2+ with ratio of 1:0.5 resulted in optimal removal of 45% PCT in terms of COD removal. However, separation using flat sheet Polyethersulfone Ultrafiltration (UF) with constant flux of 120 L/m²·h resulted in insignificant of COD removal. Nevertheless, the UF process was able to remove up to 54% of Fe 2+ at pH in alkaline condition with 8.5. In addition, a decrease in membrane permeability down to 0.2 L/m²h/bar over time, according to the filtered specific volume during the UF process, indicates fouling of the UF membrane during the 120 minutes of filtration. While the combined approach does not show significant improvement in COD removal, it does help to reduce the chemical footprint of the process, which is an important factor for the applicability of the selected water treatment method.

Synthesis and physical characterization of novel Ag2S-CdS /Ag /GNP ternary nanocomposite

A new type of Ag2S-CdS/Ag/GNP nanocomposite material was successfully synthesized in the presented work. The structural and physical properties of compounds were studied separately and together. Ag2S-CdS/Ag/GNP nanocomposite materials were studied by Xray diffraction (XRD), Ultraviolet-Visible (UV-Vis), Fourier Transform Infrared (FTIR), Raman spectroscopy and Scanning Electron Microscopy (SEM). Based on the results, Ag nanowires (NWs) were successfully synthesized, and then it was determined that during the hybridization process, two phases of acanthite Ag2S and the cubic crystal system of Ag2O were formed. Then, Ag2S-CdS NWs were formed from mixed monoclinic Ag2S and hexagonal CdS. In the absorption spectrum of Ag NWs, the main absorbance peaks were observed at 357.3 nm and 380.2 nm. The energy gap (Eg) values of the Ag sample are 3.8 eV. The band gap value of Ag2S (2.5, 3.8, 4.6 eV) and Ag2S-CdS (2.5, 3.8, 4.8 eV) have a triple value due to the formation of a hybrid structure. The Raman spectrum of Ag2S-CdS belongs to longitudinal-optical (LO) phonon modes of zinc-blende phase CdS and for the 1, 2, and 3 times spin-coated samples on the surface of GNP/PVA have observed all characteristic Raman peaks, which belong to NWs at 485.13 cm-1, and 960.22 cm-1.

On the Potential of Manufacturing Multi-Material Components With Micro/Nanocellular Structures Via the Hybrid Process of Electromagnetic Forming Injection Foaming

Abstract Multimaterial design with a combination of solid and foam structures offers a promising avenue for reducing component weight while enhancing their functionalities. However, the complexity of multistage manufacturing processes poses significant challenges to adopting such approaches. To address these challenges, this paper introduces an innovative concept known as Electromagnetic Forming Injection Foaming (EFIF), which integrates injection molding, forming, and foaming processes into a single hybrid process. This process begins with a simultaneous filling-forming phase, followed by supercritical fluid (SCF) assisted foaming controlled by electromagnetic forming. Through a series of experimental and analytical studies, this work investigates the feasibility and effectiveness of EFIF. First, the impact of pressure drop rate and pressure drop on cell size and density is examined through a specialized experimental setup enabling performing injection, forming, and foaming processes in a single operation. The potential influence of electromagnetic forming on foam injection molding is explored through experiments focusing on the effects of a polymer layer between sheet metal blank and the electromagnetic coils. Additionally, an analytical study evaluates the EFIF process by calculating expected pressure drop rates under different processing conditions and their influence on cell nucleation rates. The results showed the possibility of achieving pressure drop rates up to 1.5 × 105 bar/sec, resulting in nucleation rates up to 1.77 × 109 nuclei/cm3sec. Overall, this paper highlights the potential of EFIF to merge existing technologies into a scalable solution for manufacturing multimaterial components with micro- to nanocellular polymer foams.

Weapons of Theory

Abstract This article critically engages with central tenets of decolonial thought. While sympathetic to decolonial thought's anti-colonialism and critique of Eurocentric universalism, the article argues that decolonial thought's understanding(s) of knowledge relies on an essentialising centralisation of origins and roots. Against decolonial thought's assertion that a knowledge's relevance for anti-colonial struggle results from its position of exteriority vis-á-vis colonial systems of domination, the article suggests that we need to look at the dialectical and hybrid processes through which bodies of knowledge are made agentic in relation to concrete contexts of political conflict. To discern a body of knowledge's meaning and relevance for anti-colonial struggles, we need to understand that it is continually shaped and reshaped from recurrent practices of reading, dissemination and re-articulation, through which the theory or knowledge body becomes hybridised and reformulated in relation to incessantly evolving contexts.

S-ZVI@biochar constructs a directed electron transfer channel between dechlorinating bacteria, Shewanella oneidensis MR-1 and trichloroethylene

The combination of micron zero-valent iron (mZVI) and microorganisms is an effective method for trichloroethylene (TCE) degradation, but electron transfer efficiency needs improvement. A new chem-bio hybrid process using a composite material (S-ZVI@biochar) was developed, consisting of sulfurized mZVI and biochar as a chemical remover, and Shewanella oneidensis MR-1 and dechlorinating bacteria (DB) as a biological agent for TCE degradation. S-ZVI@biochar showed improved stability, biocompatibility, and TCE removal compared to ZVI and S-ZVI. The hybrid system DB + MR-1 + S-ZVI@biochar exhibited the highest TCE removal efficiency at 96.5% after 30 days, which was 3.7 times higher than that of bare ZVI. The study revealed that the enhanced dechlorination performance was due to improved electron transfer efficiency, adjustment of microbial community structure, and iron recycling. S-ZVI@biochar constructed electron transport channels in the composite system, improving the overall dechlorination capacity. This system shows promise for long-term TCE removal in anaerobic environments.

Application of Conventional and Hybrid Thermal-Enzymatic Modified Wheat Flours as Clean Label Bread Improvers

A new flour blend (F) composed of selected milling and leaving passages with a high content of non-starch polysaccharides underwent thermal (T), hydrothermal (H) or hybrid processing and was used along with cellulase (C) and cellulase-xylanase complex (CX) to produce bread. This modified flour can be considered a clean label product. In this study, blends of common and treated flours were tested for dough properties and rheology. The modified flours were added at 10 and 20% to the base wheat flour. A pan bread was then prepared to test their suitability for bread baking. Dough and bread properties were subsequently assessed. Accordingly, dough with added thermally, hydrothermally, and hybrid modified flours revealed differences in rheology. Addition of hybrid enzymatic-hydrothermal treated flour increased dough tenacity by 23% and baking strength by 26%, but decreased dough extensibility by 19%, whereas hybrid enzymatic-thermal modification increased water absorption by 6% and bread yield from 146.77% to 150.02% when modified flour was added at 20%. Breads with added modified flours demonstrated a 16% increase in bread volume, 8% lower baking loss, and 14% greater density, with no negative effect on color and texture. Thus, hybrid thermal-enzymatic treatment of the developed flours can be recommended as a suitable method for enhancing the utilization of waste flour fractions and increasing their value by enabling them to be considered as clean label bread improvers.

Floral Morphological Variation in Black Pepper (Piper nigrum L.) Varieties and Hybrid Lines

The inter-variety crossing is a promising approach to increase black pepper production. However, successful hybridization hinges on floral characteristics. This study investigated the floral morphology of diverse pepper varieties and their hybrid offspring. Eighteen genotypes, including parent varieties and F1 hybrids, were cultivated in pots under greenhouse conditions at the Indonesian Spice and Medicinal Crops Research Institute, Bogor. Flower and fruit traits were observed. Results indicated variability in spike morphology. While most ripe spikes were yellowish-green, exceptions included LH 20-1 and LH 22-1. Ciinten and LH 4-5 displayed superior spike length and fruit set, contrasting with the shorter, less productive spikes of 20-1, 22-1, and 455-N2-97. Stigma receptivity and another dehiscence coincided in Ciinten, N2BK, LH 6-2, and LH 4-5, simplifying the hybridization process. Conversely, earlier stigma receptivity in Petaling 1, Petaling 2, Natar 1, Natar 2, LH 44-9, LH 20-1, and LH 22-1 facilitated castration procedures. These findings offer valuable insights for optimizing pepper breeding programs.

Preparation of bainite phase microstructure by laser-electromagnetic induction hybrid solid-state phase transformation

Increasing the proportion of bainite and martensite phases is one of the effective ways to enhance the toughness of medium-carbon low-alloy steel(42CrMo). In this paper, the surface heat treatment of 42CrMo steel is carried out by using a laser heat source to achieve complete austenitization, then with electromagnetic induction heating for several times to implement insulation, and eventually to promote bainite phase transformation. In conjunction with the temperature history curves, OM, SEM, and EBSD are used to characterize the bainite morphology and percentage of bainite via different parameters of the hybrid process. The results demonstrate that the hybrid process combined with twice electromagnetic induction heating can yield a considerable proportion of bainite phase in 42CrMo steel. The resulting duplex structure, consisting of bainite and a minor fraction of martensite, exhibits a significant increase (81.1%) in tensile strength, while maintaining similar impact toughness. The elongation after fracture only has a slight reduction of 5.5% compared to that of the substrate. This innovative process provides a practical alternative to traditional bainite isothermal treatment method which must perform in a heat treatment furnace. Therefore, it is presented as a promising solution for enhancing the mechanical properties of medium-carbon low-alloy high strength steels.

N400 or P600?—A Systematic Review of ERP Studies on Gender Stereotype Violations

ABSTRACTPsycholinguistic studies using the event‐related brain potential (ERP) technique have found both N400 and P600 effects for gender stereotype violations. The finding of a P600 effect for this type of world knowledge violation is surprizing given that this component is traditionally associated with syntactic violations. In this paper, we set out to systematically analyse design‐ and task patterns of ERP studies investigating gender stereotype violations. Based on our review, we propose a scheme that predicts a P600 effect for gender stereotype violations for stimuli comprising entire sentences, and specifically when the gender stereotype serves to establish coherence in inferences (i.e., expecting a specific referent gender or a stereotype‐appropriate behaviour of the sentence subject based on the gender stereotype information). We predict an N400 effect for gender stereotype information that does not serve to establish coherence in inferences, as well as in priming paradigms. By extension, our predictive scheme suggests that the N400 may reflect a hybrid process of semantic retrieval and integration, while the P600 may reflect a cognitive process of error monitoring, and mental revision. Our study can aid in the interpretation of previous findings and inform future studies investigating gender stereotyping.

Development of Iron and Zinc Biofortified Rice Variety for Nutrition Improvement in Bangladesh

Depleting micronutrients such as iron and zinc poses a serious risk to a population’s health in regions where nutrient-rich meals are unavailable, such as Bangladesh. We can engross the essential minerals using biofortified rice varieties enriched with essential minerals. We experimented to develop and evaluate a new high-yielding rice variety, Advanced Chemical Industries (ACI) dhan1, specifically for the rainy season in Bangladesh. We used high-yielding rice parent lines with high iron and zinc in the hybridization process, then grew and selected the resulting breeding lines during the rainy season of Bangladesh to identify the most suitable rice lines for the rainy season. The plant height and days to maturity traits were the same as shown in both cultivars, ACI dhan1 and Bangladesh Rice Research Institute (BRRI) dhan62 (standard check), which are 104 cm and 103 days, respectively. On the other hand, ACI dhan1 produced 6.05 tons per hectare, and BRRI dhan62 yielded 4.33 tons per hectare. A quality analysis of the grain quantified that ACI dhan1 contained 8.21% protein and 25.12% apparent amylose. Similarly, ACI dhan1 had very high levels of Zn (24.8 ppm) and Fe (9 ppm). We observed a more than 70% improvement in milling capabilities and head rice recovery. In proposed variety trials, the Seed Certification Agency of Bangladesh identified an average yield advantage of more than 10% for ACI dhan1 in 10 locations. National Seed Board, Bangladesh, released it as a candidate for high-iron and zinc-enriched rice variety and approved its extensive cultivation in Bangladesh. Due to its high micronutrient content, excellent agronomic performance, and non-sticky cooking quality, ACI dhan1 presents itself as a variety of choice in Bangladesh’s pursuit of food and nutrition security. Thus, the present study demonstrates the large achievement of biofortification by ACI dhan1 and hence promises to be a strong weapon in the battle against malnutrition.

“Here” Versus “There”: Authoritarian Populism, Environment, and Scapegoat Ecology Among Loggers of Northwestern Russia

This case study contributes to the research on the environmental beliefs of extractive industry workers in an illiberal populist regime. This research is based on semi-structured interviews with logging sector workers of the Russian Northwest—a severely understudied population directly involved in resource extraction. The data shows that these workers understand forestland as two separate localities: the northwestern region of Russia, in which the loggers have expertise and knowledge, and the rest of the country, in which workers don’t have any work or travel experience. This division facilitates a process of hybridization of populist environmental narratives on one hand, and loggers’ science-supported knowledge and experiences on the other. This hybridization of the workers’ beliefs is anchored in, and perpetuated by, Russia’s state-controlled media and its modern authoritarian populist regime. This research offers policy implications and encourages future studies on the politicization of the environment and resources in authoritarian populist states.

Produced Water from the Oil and Gas Industry as a Resource—South Kuwait as a Case Study

Produced Water (PW) represents the largest waste stream in the oil and gas industry. As a water resource and as a source of valuable minerals such as alkali salts, it is has been highly under-valued, especially in hyper-arid regions. The beneficial use of PW ranges from water reinjection to elevated oil recovery from reservoirs with almost instantaneous returns, to the extraction of minerals from PW, which involves a number of different processes and setups. The economic value of PW-derived end products offers alternative revenue sources, with market fluctuations and conditions different from those of the hydrocarbon market. The end products of water and industrial salt support local industries such as agriculture, reflecting positively on the gross domestic product (GDP). Furthermore, resource extraction from PW of the oil and gas industry helps countries augment their circular economy. In this regard, the economic feasibility of three scenarios—the use of PW for oil recovery, the use of PW as an alternate source of water and industrial salt, and a hybrid process of both—is explored. The results show that there is great potential for water reuse in Enhanced Oil Recovery operations, as well as in the reduction in freshwater consumption for oil- and gas-extraction operations in the state of Kuwait by up to 4.8 percent when PW generated by SK oilfields is considered, and by 42 percent if PW from all oilfields in Kuwait is reused in the same manner.