Horizontal Alveolar Bone Resorption Research Articles

Alveolar Ridge Preservation Utilizing Composite (Bioceramics/Collagen) Graft: A Cone-Beam Computed Tomography Assessment in a Randomized Split-Mouth Controlled Trial

Background: The vast percentage of the alveolar bone resorption process happens within the first 12 to 24 weeks post extraction; however, this phenomenon is chronic, and the alveolar ridge continues to resorb. In order to prevent this reduction or at least recompense the loss of bone dimensions, the alveolar ridge preservation (ARP) technique was developed. Objectives: This research studied the vertical and horizontal bone dimensional changes as a result of non-molar teeth extraction alone against extraction with alveolar ridge preservation utilizing composite (bioceramics/collagen) graft by cone-beam computed tomography radiographies analyses. Material and Methods: This research was a randomized split-mouth controlled trial. 12 patients need extraction of the maxillary non-molar teeth were enrolled and allocated into 2 groups. 12 sockets after atraumatic extraction were filled with a composite graft in the role of the test group, 12 sockets left to unassisted healing after atraumatic extraction without any graft materials in the role of the control group. Two CBCT radiographs were taken at baseline and at 4 months after extraction for comparison. Both vertical and horizontal resorptions of the alveolar ridge were analyzed between test and control group by CBCT radiographs. Results: 4 months after extraction, there was a mean of vertical alveolar bone resorption compared with the baseline (0.56 ± 0.15 mm) in the test group and (1.47 ± 0.30 mm) in the control group. Whereas it was a mean of horizontal alveolar bone resorption compared with the baseline (0.90 ± 0.16 mm) in the test group and (2.26 ± 0.30 mm) in the control group. Therefore, there was a significant difference between the two groups. Conclusions: Within the limitations of this research, we demonstrated that the osteogen-plug technique significantly decreased the reduction of the bone dimensional in comparison to the tooth extraction alone, and showed that the dimensional change of the alveolar ridge after tooth extraction was minimized by using an osteogen-plug.

A fixed reconstruction of fully edentulous patients with immediate function using an apically tapered implant design: a retrospective clinical study

BackgroundImmediate function has become an accepted treatment modality for fixed restorations in completely edentulous jaws. It is known that implant microtopography (surface) may enhance osseointegration, while implant macrotopography (macrodesign) plays an important role in primary stability in the patient requiring an immediate loading. The aim of this retrospective study was to evaluate the clinical and radiographic outcomes of the edentulous subjects treated with narrow and/or regular diameter, which placed and loaded immediately.MethodsForty-two consecutive patients received 171 implants, including regular and narrow diameter implants (NDIs). Each jaw, 19 mandibles and 24 maxillae, was treated with a fixed-full arch prosthesis according to the Straumann® Pro Arch concept. The majority (95%) of the restorations were supported by four implants, of which the posterior two implants were tilted. A provisional functional acrylic prosthesis was delivered on the day of surgery. All patients were followed up to 55 months. Cumulative survival rate was determined using Kaplan-Meier analysis. Radiological measurement of marginal bone level was performed.ResultsThe overall follow-up time for survival rate was up to 55 months. Four implants (3 implants in maxilla, 1 implant in mandible) were lost, resulting in an overall cumulative implant survival rate of 97.7%. Implant survival rate in the axial and tilted implants was not statistically significant. The mean of interproximal marginal bone loss was 0.15 mm after 24 months. Good soft tissue health was observed in almost 99% of patients. The final prosthesis survival rate was 100%.ConclusionsThe results of this retrospective pilot study indicated that total edentulous patients requiring an immediate implant placement and loading can be successfully treated with this implant design. The improved mechanical properties of these implants might give a more conservative treatment option for the jaws showing a severe horizontal alveolar bone resorption.

Three-dimensional analysis of dimensional changes after alveolar ridge preservation with bone substitutes or plasma rich in growth factors: Randomized and controlled clinical trial.

To evaluate alveolar ridge dimensional changes of different alveolar ridge preservation techniques after 3 months of tooth extraction and to compare the efficacy of autologous plasma rich in growth factor (PRGF) to the bone substitutes in alveolar ridge preservation and sites left to heal spontaneously. Forty patients requiring tooth extraction in the anterior maxilla were randomly allocated to the four following treatment modalities: spontaneous healing (control), natural bovine bone mineral covered with resorbable native collagen membrane (BBM/CM), freeze-dried bone allograft covered with resorbable native collagen membrane (FDBA/CM) and PRGF alone. Cone beam computed tomography (CBCT) scans were taken after surgery and 3 months later. The measurements of height and width (at 1, 3, and 5 mm below the crest) were performed after superimposing the 2 consecutive CBCT scans. The greatest horizontal alveolar bone resorption at 1 mm below bone crest was observed in the control group (-1.61 ± 1.76 mm, P = .037), whereas the least reduction in width was found in the BBM/CM group (-0.68 ± 0.67 mm, P = .037). The most pronounced alveolar height reduction was observed in the control group (-0.86 ± 0.43 mm), whereas alveolar ridge preservation with BBMC/CM (-0.26 ± 0.91 mm) and PRGF (-0.54 ± 0.86 mm) successfully reduced the alveolar height reduction as compared to the control group. Alveolar ridge preservation technique in the esthetic zone using BBM/CM or using PRGF is beneficial to reduce horizontal and vertical bone changes.

A novel in situ bone elevation method to achieve vertical periodontal augmentation in dogs: A pilot study.

ObjectivesThe purpose of this study was to investigate whether a novel in situ interdental bone elevation method could achieve vertical bone augmentation around natural teeth.MethodsHorizontal periodontal bone defects were created at nine quadrants of mandibles in five dogs. Six weeks later, one of the nine quadrants was randomly chosen as the model control. The remaining mandibles were allocated into two experimental groups: cortical bone removing (CBR) or interdental bone elevation (IBE). For the IBE group, four millimetres of interdental bone blocks were separated and elevated from the base of alveolar bone. Then bone xenografts were implanted beneath the elevated alveolar blocks. Animals were euthanised 12 weeks post‐operation. Cone beam computed tomography (CBCT) examination and histological analysis were performed to evaluate the surgical outcomes.ResultsEnhanced soft tissue profiles were observed in the two experimental groups as compared to the model control group. CBCT images showed that the height of alveolar bone was significantly higher in the IBE group with bone blocks seated near the cementoenamel junction. Significantly larger area of bone tissues with the highest coronal level of new bone was observed in the IBE group. New bone was observed around the elevated bone blocks with bone remodelling and neovascularisation inside the elevated blocks.ConclusionsVertical bone augmentation at interdental sites may be performed through in situ interdental bone elevation for patients with horizontal alveolar bone resorption.

Periodontal bacterial colonization in synovial tissues exacerbates collagen-induced arthritis in B10.RIII mice.

BackgroundIt has been previously hypothesized that oral microbes may be an etiological link between rheumatoid arthritis (RA) and periodontal disease. However, the mechanistic basis of this association is incompletely understood. Here, we investigated the role of periodontal bacteria in induction of joint inflammation in collagen-induced arthritis (CIA) in B10.RIII mice.MethodsCIA-prone B10.RIII mice were infected orally with a polybacterial mixture of Porphyromonas gingivalis, Treponema denticola, and Tannerella forsythia for 24 weeks before induction of CIA. The ability of polybacterial mixture to colonize the periodontium and induce systemic response, horizontal alveolar bone resorption in infected B10.RIII mice was investigated. Arthritis incidence, severity of joint inflammation, pannus formation, skeletal damage, hematogenous dissemination of the infection, matrix metalloproteinase 3 (MMP3) levels, and interleukin-17 expression levels were evaluated.ResultsB10.RIII mice had gingival colonization with all three bacteria, higher levels of anti-bacterial immunoglobulin G (IgG) and immunoglobulin M (IgM) antibodies, significant alveolar bone resorption, and hematogenous dissemination of P. gingivalis to synovial joints. Infected B10.RIII mice had more severe arthritis, and higher serum matrix metalloproteinase 3 levels and activity. Histopathological analysis showed increased inflammatory cell infiltration, destruction of articular cartilage, erosions, and pannus formation. Additionally, involved joints showed had expression levels of interleukin-17.ConclusionThese findings demonstrate that physical presence of periodontal bacteria in synovial joints of B10.RIII mice with collagen-induced arthritis is associated with arthritis exacerbation, and support the hypothesis that oral bacteria, specifically P. gingivalis, play a significant role in augmenting autoimmune arthritis due to their intravascular dissemination to the joints.Electronic supplementary materialThe online version of this article (doi:10.1186/s13075-016-1056-4) contains supplementary material, which is available to authorized users.

Implant supported fixed prosthesis for complete edentulous maxilla with severe alveolar ridge resorption: A case report

Implant fixed prosthesis for the complete edentulous maxilla provides significant benefits in the aspects of functions and esthetics compared with the conventional denture. Implant supported fixed prosthesis are totally supported by implant, and thus stabilizes the prosthesis to the maximum degree as possible. Also, the improved retention and stability of fixed prosthesis enhance patients’ psychological and psychosocial health. This clinical presentation describes a maxillary full arch implant-supported fixed prosthesis in complete maxillary edentulous patient who showed vertical and horizontal alveolar bone resorption in the anterior ridge. To rehabilitate the esthetics and proper lip support, the zirconia framework was fabricated and the pink porcelain was veneered to reproduce the natural gingival tissue. After 9 months of follow up, the restorations were maintained without complications and the patient was satisfied with the restoration both functionally and esthetically. (J Korean Acad Prosthodont 2016;54:152-9)

Invasion of Oral and Aortic Tissues by Oral Spirochete Treponema denticola in ApoE −/− Mice Causally Links Periodontal Disease and Atherosclerosis

Treponema denticola is a predominantly subgingival oral spirochete closely associated with periodontal disease and has been detected in atherosclerosis. This study was designed to evaluate causative links between periodontal disease induced by chronic oral T. denticola infection and atherosclerosis in hyperlipidemic ApoE(-/-) mice. ApoE(-/-) mice (n = 24) were orally infected with T. denticola ATCC 35404 and were euthanized after 12 and 24 weeks. T. denticola genomic DNA was detected in oral plaque samples, indicating colonization of the oral cavity. Infection elicited significantly (P = 0.0172) higher IgG antibody levels and enhanced intrabony defects than sham infection. T. denticola-infected mice had higher levels of horizontal alveolar bone resorption than sham-infected mice and an associated significant increase in aortic plaque area (P ≤ 0.05). Increased atherosclerotic plaque correlated with reduced serum nitric oxide (NO) levels and increased serum-oxidized low-density lipoprotein (LDL) levels compared to those of sham-infected mice. T. denticola infection altered the expression of genes known to be involved in atherosclerotic development, including the leukocyte/endothelial cell adhesion gene (Thbs4), the connective tissue growth factor gene (Ctgf), and the selectin-E gene (Sele). Fluorescent in situ hybridization (FISH) revealed T. denticola clusters in both gingival and aortic tissue of infected mice. This is the first study examining the potential causative role of chronic T. denticola periodontal infection and vascular atherosclerosis in vivo in hyperlipidemic ApoE(-/-) mice. T. denticola is closely associated with periodontal disease and the rapid progression of atheroma in ApoE(-/-) mice. These studies confirm a causal link for active oral T. denticola infection with both atheroma and periodontal disease.

The Effect of Removable Partial Dentures on Alveolar Bone Resorption: A Retrospective Study with Cone‐Beam Computed Tomography

The aim of this study was to compare vertical and horizontal mandibular alveolar bone resorption by measuring bone morphological variation in Kennedy Class II removable partial denture (RPD) wearers and non-wearers using cone-beam computed tomography (CBCT). In total, 124 sites in the CBCT scans of 62 (29 RPD non-wearers, 33 RPD wearers) Kennedy Class II patients were analyzed retrospectively. Three-dimensional representations of the mandible with superimposed cross-sectional slices were developed with the CBCT scans to evaluate the mandibular alveolar height and width by measuring distances between the mandibular canal, mylohyoid ridge, alveolar crest, and lower border of the mandible in four regions (eight sites) of Kennedy Class II non-wearers and wearers of RPDs. Mandibular alveolar bone height and width were significantly lower in edentulous sites when compared with dentate sites in both Kennedy Class II non-wearers and wearers of RPDs (p < 0.05). Additionally, mean vertical and horizontal mandibular bone resorption was significantly higher in RPD wearers than in non-wearers (p < 0.05). Vertical and horizontal alveolar bone resorption was found to be higher in the RPD wearing patients when comparing the dentate and edentulous sites.

Retrognathic maxilla in “Habsburg jaw”

To evaluate the dentoskeletal features of the "Habsburg jaw" by analyzing the skull of Joanna of Austria. The skull, the panoramic radiograph, and the lateral cephalogram of Joanna of Austria were analyzed. The cephalometric values of Joanna were compared to cephalometric standards for adult female subjects. The analysis of the dentition on the dry skull and on the panoramic radiograph showed a generalized horizontal alveolar bone resorption with severe bone loss that was interpreted as a sign of severe periodontal disease with respect to the young age (31 years). The cephalometric analysis revealed the presence of a skeletal Class III disharmony associated with maxillary retrusion and normal sagittal position of the mandible. The maxilla exhibited a reduction in the sagittal dimension while the mandible presented with increased dimensions both in total mandibular length (Co-Gn) and in the mandibular body (Go-Gn). The skeletal open bite contributed to the lack of mandibular protrusion though in presence of increased mandibular sagittal dimensions. Joanna of Austria appeared to be affected by a peculiar type of "Habsburg jaw" as the Class III skeletal disharmony was due to a retrognathic maxilla rather than to a prognathic mandible.

Long-term occlusal guidance of a severely intoxicated patient with yusho (PCB poisoning): A case report

The peculiar dentoorofacial characteristics and 12 years of interdisciplinary management of a patient who was severely intoxicated with the man-made chemical polychlorinated biphenyls (PCBs) are described in this case report. Cephalometric measurements showed that the SNA and SNB angles were reduced but that the developments in height and skeletal maturity were in normal ranges. Gingival hyperpigmentation that was caused by high blood PCB concentration was extremely slow to fade. A cystic mass, diffused trabeculae, and irregular calcification, which were shown on the radiograph and which were caused by high blood levels of PCB, changed gradually. However, the patient had periodontal disease because of horizontal alveolar bone resorption and a deep periodontal pocket, despite good plaque control. After the PCB poisoning the tooth roots were hypoplastic and dilacerated. One root was extracted because of chronic periodontitis. Some teeth were impacted, malposed, or ankylosed.

Dental radiology: ageing changes in permanent teeth of beagle dogs

ABSTRACTRadiographic interpretation of dental or periodontal disease is dependent in part on an understanding of ageing changes, A progressively ageing colony of healthy beagle dogs (120 to 3759 days) was studied by use of high‐detail radiographs made following the death of the dog. Morphological features whose radiographic appearance was found to be especially age‐dependent were: root canal size, both vertical and horizontal alveolar bone resorption, visualisation of the lamina dura dentis, and detection of hypercementosis. Understanding of these ageing changes is necessary to avoid over‐diagnosis of disease.