High Stability Research Articles

Enhanced soft magnetic properties with high frequency stability of pure iron powder cores via high-pressure compaction – An environment and cost saving solution as a prospective alternative to soft magnetic composites

The paper presents the analysis of the magnetic behaviour of soft magnetic powder compacts vs. the increasing compacting pressure. An unexpectedly positive result was obtained at a pressure of 1500 MPa, as the pure iron compact without coating of powder particles and without subsequent heat treatment showed very good magnetic properties compared to the class of soft magnetic composites (SMCs). In particular, the effective relative permeability of μeff ∼120, stable up to a frequency f ∼200 kHz, the maximum total relative permeability of μtotmax ∼700, and the specific electrical resistivity of ρR ∼10−5 Ω m. This phenomenon was explained on the basis of analyses of the samples microstructure, the magnetic and electrical properties, magnetization processes, inner demagnetizing fields, Barkhausen noise and thermal diffusivity. It was found that the grain size refinement inside iron particles occurs at certain elevated compaction pressure because the deformation bands gradually rise and break up with compaction pressure, leading to a higher resistivity of the compact thus to its SMC-like behaviour, despite the counteracting effect of increasing number of iron-iron bridges among neighbouring particles. The grain size refinement causes also the refinement of magnetic domain structure, which facilitates the magnetization reversal, although, the increased internal stresses and microstructural defects affect domain wall mobility negatively. The most favourable combination of the mentioned factors influences, finally resulting in the soft magnetic properties enhancement, appeared at 1500 MPa. Due to high-pressure compaction, the high density (above ∼95 % of iron density) of a compact was achieved, ensuring sufficient mechanical properties. The presented material can serve as a potential supplanter of SMCs in many applications as it provides evident advantages, such as its easy production with minimum chemical waste (because any additional chemical processes and substances needed for particle coatings in conventional SMCs are completely omitted), as well as easy recycling process, which makes it eco-friendly and cost-effective, nevertheless, maintaining the advantages of SMCs.

PEZy-miner: An artificial intelligence driven approach for the discovery of plastic-degrading enzyme candidates

Plastic waste has caused a global environmental crisis. Biocatalytic depolymerization mediated by enzymes has emerged as an efficient and sustainable alternative for plastic treatment and recycling. However, it is challenging and time-consuming to discover novel plastic-degrading enzymes using conventional cultivation-based or omics methods. There is a growing interest in developing effective computational methods to identify new enzymes with desirable plastic degradation functionalities by exploring the ever-increasing databases of protein sequences. In this study, we designed an innovative machine learning-based framework, named PEZy-Miner, to mine for enzymes with high potential in degrading plastics of interest. Two datasets integrating information from experimentally verified enzymes and homologs with unknown plastic-degrading activity were created respectively, covering eleven types of plastic substrates. Protein language models and binary classification models were developed to predict enzymatic degradation of plastics along with confidence and uncertainty estimation. PEZy-Miner exhibited high prediction accuracy and stability when validated on experimentally verified enzymes. Furthermore, by masking the experimentally verified enzymes and blending them into homolog dataset, PEZy-Miner effectively concentrated the experimentally verified entries by 14∼30 times while shortlisting promising plastic-degrading enzyme candidates. We applied PEZy-Miner to 0.1 million putative sequences, out of which 27 new sequences were identified with high confidence. This study provided a new computational tool for mining and recommending promising new plastic-degrading enzymes.

Design of MEMS Pressure Sensor Anti-Interference System Based on Filtering and PID Compensation.

Due to the inherent temperature drift and lack of static stability in traditional pressure sensors, which make it difficult for them to meet the increasing demands of various industries, this paper designs a new system. The proposed system integrates temperature measurement and regulation circuits, signal processing, and communication circuits to accurately acquire and transmit pressure sensor data. The system designs a filtering algorithm to filter the original data and develops a data-fitting operation to achieve error compensation of the static characteristics. In order to eliminate the temperature drift problem of the sensor system, the system also adopts an improved PID thermostatic control algorithm to compensate for the temperature drift. Finally, it can also transmit the processed pressure data remotely. The experimental results show that the nonlinear error at 50 °C is reduced from the initial 1.82% to 0.24%; the hysteresis error is significantly reduced from 1.23% to 0.046%; and the repeatability error control is reduced from 3.79% to 0.89%. By compensating for thermal drift, the system's thermal sensitivity drift coefficient is reduced by 74.67%, the thermal zero drift coefficient is reduced by 66.24%, and the wireless communication range is up to 1km. The above significant optimization results fully validate the high accuracy and stability of the system, which is perfectly suited for demanding pressure measurement applications.

Novel pectin-carboxymethylcellulose-based double-layered mucin/chitosan microcomposites successfully protect the next-generation probiotic Akkermansia muciniphila through simulated gastrointestinal transit and alter microbial communities within colonic ex vivo bioreactors

The rapid acceleration of microbiome research has identified many potential Next Generation Probiotics (NGPs). Conventional formulation processing methods are non-compatible, leading to reduced viability and unconfirmed incorporation into intestinal microbial communities; consequently, demand for more bespoke formulation strategies of such NGPs is apparent. In this study, Akkermansia muciniphila (A.muciniphila) as a candidate NGP was investigated for its growth and metabolism properties, based on which a novel microcomposite-based oral formulation was formed. Initially, a chitosan-based microcomposite was coated with mucin to establish a surface culture of A.muciniphila. This was followed by ‘double encapsulation’ with pectin (PEC) using a novel Entrapment Deposition by Prilling method to create core–shell double-encapsulated microcapsules. The formulation of A.muciniphila was verified to require no oxygen-restriction properties, and additionally, biopolymers were selected, including carboxymethylcellulose (CMC), that support and enhance its growth; consequently, a high viability (6 log CFU/g) of A.muciniphila microencapsulated in PEC-CMC double-encapsulates was obtained. Subsequently, the high stability of the PEC-CMC double-encapsulates was verified in simulated gastric fluid, successfully protecting and then releasing the A.muciniphila under intestinal conditions. Finally, employing a model of gastrointestinal transit and faecal-inoculated colonic bioreactors, significant alterations in microbial communities following administration and successful establishment of A.muciniphila were demonstrated.

Chrysophanol‐Loaded Composites with Xanthan Gum/Polycaprolactone for Drug Release Enhancement

AbstractThis work focused on synthesizing novel chrysophanol‐loaded composites with varied ratios of polycaprolactone/xanthan gum to enhance the release of chrysophanol. The characteristics of the obtained composites were analyzed by infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, differential scanning calorimetry, rhermogravimetric analysis and dynamic light scattering methods. The xanthan gum/polycaprolactone/chrysophanol (XPC) composites were obtained in the powdery form with particle sizes ranging from 80–100 nm. The results of hydrophilic and hydrophobic tests of the composites were discussed. Chrysophanol, polycaprolactone and xanthan gum can interact and are compatible to each other. XPC composites exhibit high stability and don't cause the negative effect on cells. Additionally, the chrysophanol release and kinetic model of chrysophanol release from the XPC composites in different pH buffer solutions were investigated and evaluated. Using drug carriers such as xanthan gum and polycaprolactone can enhance the release of chrysophanol in both pH 2.0 and pH 7.4 buffer solutions. In the presence of biopolymers, the distribution ability of chrysophanol in aqueous solutions such as pH 2.0 buffer, pH 7.4 buffer solutions, and 0.9 % NaCl solution was enhanced significantly. This will be favorable for an increase in the absorption of chrysophanol in the human body.

Self-Standing Covalent Organic Polymer Membrane with High Stability and Enhanced Ion-Sieving Effect for Flow Battery.

Fabrication of ion-conducting membranes with continuous sub-nanometer channels holds fundamental importance for flow batteries in achieving safe integration of renewable energy into grids. Self-standing covalent organic polymer (COP) membranes provide feasibility due to their rapid and selective ion transport. However, the development of a scale-up possible, mechanically robust and chemically stable membranes remains a significant challenge. Herein, using irreversible strong secondary amine linkage, we propose a self-standing COP membrane with sub-nanometer pores ranging from 4.5 to 6.4 Å, by a simple and efficient in-situ polymerization approach. This membrane exhibits enhanced selectivity for proton and vanadium ions, especially excellent electrochemical stability, delivering an energy efficiency of over 80% at the current density of 200 mA cm-2 over 1000 cycles for an all-vanadium redox flow battery (VFB). This study provides novel insights for COP-based ion-sieving membranes in sustainable energy fields.

Enhanced methylene blue degradation by graphene oxide-encapsulated nano zero-valent iron composites: Optimization, mechanistic insights, and environmental implications

Methylene blue (MB) in textile dye wastewater poses a significant environmental challenge due to its high chemical stability and resistance to biodegradation. This study investigates the use of a novel graphene oxide-encapsulated nano zero-valent iron (GO/nZVI) composite for the efficient and sustainable degradation of MB. The GO/nZVI composite was synthesized via hydrothermal co-precipitation and self-assembly methods and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Under optimized conditions, the composite achieved an impressive 99.99 % degradation of MB within 40 min, demonstrating substantial improvements in stability and reusability. The composite retained over 84.5 % of its catalytic activity after five cycles, underscoring its potential for practical wastewater treatment applications. The optimization of reaction conditions through response surface methodology (Box-Behnken design, BBD) facilitated the formation of a core-shell structure, which significantly enhanced electron transfer and radical generation, crucial for MB oxidation. Radical quenching experiments confirmed hydroxyl radicals (·OH) as the primary active species, and gas chromatography-mass spectrometry (GC-MS) analysis elucidated the degradation pathway. This study presents a scalable and environmentally friendly solution for the treatment of recalcitrant organic pollutants, marking a significant advancement in water purification technologies.

Biomimetic Entropy-Dominant Molecular Hinges with Picomolar Affinity.

Molecular hinges are ubiquitous in both natural and artificial supramolecular systems. A major challenge to date, however, has been simultaneously achieving high thermodynamic and kinetic stability. Here, we employ host-enhanced intramolecular charge-transfer interactions to mediate entropy-favored complexation between a flexible AB2-type guest and a macrocyclic host, forming a new type of molecular hinge with an ultrahigh picomolar binding affinity (Ka > 1012 M-1). This entropy-promoted hinge modulates photoisomerization, exhibiting a substantial preference for the E-isomer, which is further demonstrated to mirror the natural retinal-opsin cycle, promoting the sensitization of visible light. This work unveils an efficient approach to exploit entropy-dominant architectures for the design of hierarchical molecular systems.

Dual Plasmons with Bioinspired 3D Network Structure Enabling Ultrahigh Efficient Solar Steam Generation.

Plasmonic nanomaterials such as Au, Ag, and Cu are widely recognized for their strong light-matter interactions, making them promising photothermal materials for solar steam generation. However, their practical use in water evaporation is significantly limited by the trade-off between high costs and poor stability. In this regard, we introduce a novel, nonmetallic dual plasmonic TiN/MoO3-x composite. This composite features a three-dimensional, urchin-like biomimetic structure, with plasmonic TiN nanoparticles embedded within a network of plasmonic MoO3-x nanorods. As a solar absorber, the TiN/MoO3-x composite achieves a high evaporation rate of ∼2.05 kg m-2 h-1 with an energy efficiency up to 106.7% under 1 sun illumination, outperforming the state-of-the-art plasmonic systems. The high photothermal stability and unique dual plasmonic nanostructure of the TiN/MoO3-x composite are demonstrated by advanced in situ laser-heating transmission electron microscopy and photon-induced near-field electron microscopy/electron energy-loss spectroscopy, respectively. This work provides new inspiration for the design of plasmonic materials.

A new three-dimensional barium(II) coordination polymer constructed from N,N'-bis(glycinyl)pyromellitic diimide: microwave-assisted synthesis, structure, Hirshfeld surface analysis and properties.

A new three-dimensional (3D) coordination polymer, namely, poly[diaqua[μ5-2,2'-(1,3,5,7-tetraoxo-1,2,3,5,6,7-hexahydropyrrolo[3,4-f]isoindole-2,6-diyl)diacetato]barium(II)], [Ba(C14H6N2O8)(H2O)2]n, (I), has been synthesized by the microwave-irradiated reaction of Ba(NO3)2 with N,N'-bis(glycinyl)pyromellitic diimide {BGPD, namely, 2,2'-(1,3,5,7-tetraoxo-1,2,3,5,6,7-hexahydropyrrolo[3,4-f]isoindole-2,6-diyl)diacetatic acid, H2L}. The title compound was structurally characterized by single-crystal X-ray diffraction analysis and powder X-ray diffraction analysis, as well as IR spectroscopy. In the crystal structure of (I), the BaII ion is nine-coordinated by six carboxylate O atoms from five symmetry-related L2- dianions and one imide O atom, as well as two water O atoms. The coordination geometry of the central BaII ion can be described as a spherical capped square antiprism. One carboxylate group of the ligand serves as a μ3-bridge linking the BaII cations into a one-dimensional polynuclear secondary building unit (SBU). Another carboxylate group of the ligand acts as a μ2-bridge connecting the 1D SBUs, thereby forming a two-dimensional (2D) SBU. The resulting 2D SBUs are extended into a 3D framework via the pyromellitic diimide moiety of the ligand as a spacer. The 3D Ba framework can be simplified as a 5-connected hexagonal boron nitride net (bnn) topology. The intermolecular interactions in the 3D framework were further investigated by Hirshfeld surface analysis and the results show that the prominent interactions are H...O (45.1%), Ba...O (11.1%) and C...H (11.1%), as well as H...H (11.1%) contacts. The thermal stability, photoluminescence properties and UV-Vis absorption spectra of (I) were also investigated. The coordination polymer exhibits a fluorescence emission with a quantum yield of 0.071 and high thermal stability.

2D coordination polymers of cadmium(II) and zinc(II) derived from N,N'-bis(glycinyl)pyromellitic diimide: microwave-assisted synthesis, structures, spectroscopic properties and influence of metal-ion size.

Two new two-dimensional (2D) coordination polymers (CPs), namely, poly[diaqua[μ4-2,2'-(1,3,5,7-tetraoxo-1,2,3,5,6,7-hexahydropyrrolo[3,4-f]isoindole-2,6-diyl)diacetato-κ4O:O':O'':O''']cadmium(II)], [Cd(C14H6N2O8)(H2O)2]n (1), and poly[[tetraaqua[μ4-2,2'-(1,3,5,7-tetraoxo-1,2,3,5,6,7-hexahydropyrrolo[3,4-f]isoindole-2,6-diyl)diacetato-κ4O:O':O'':O'''][μ2-2,2'-(1,3,5,7-tetraoxo-1,2,3,5,6,7-hexahydropyrrolo[3,4-f]isoindole-2,6-diyl)diacetato-κ2O:O']dizinc(II)] dihydrate], {[Zn(C14H6N2O8(H2O)2]·H2O}n (2), have been synthesized by the microwave-irradiated reaction of Cd(CH3COO)2·2H2O and Zn(CH3COO)2·2H2O, respectively, with N,N'-bis(glycinyl)pyromellitic diimide {BGPD, namely, 2,2'-(1,3,5,7-tetraoxo-1,2,3,5,6,7-hexahydropyrrolo[3,4-f]isoindole-2,6-diyl)diacetic acid, H2L}. In the crystal structure of 1, the CdII ion is six-coordinated by four carboxylate O atoms from four symmetry-related L2- dianions and two coordinated water molecules, furnishing an octahedral coordination geometry. The bridging L2- dianion links four symmetry-related CdII cations into a 2D layer-like structure with a 3,4-connected bex topology. In the crystal structure of 2, the ZnII ion is five-coordinated by three carboxylate O atoms from three different L2- dianions and two coordination water molecules, furnishing a trigonal bipyramidal coordination geometry. Two crystallographically independent ligands serve as μ4- and μ2-bridges, respectively, to connect the ZnII ions, thereby forming a 2D layer with a 3,3-connected hcb topology. Crystal structure analysis reveals the presence of n→π* interactions between two carbonyl groups of the pyromellitic diimide moieties in 1 and 2. CP 1 exhibits an enhanced fluorescence emission compared with free H2L. The framework of 2 decomposes from 720 K, indicating its high thermal stability. A comparative analysis of a series of structures based on the BGPD ligand indicates that the metal-ion size has a great influence on the connection modes of the metal ions due to different steric effects, which, in turn, affects the structures of the SBUs (secondary building units) and frameworks.

Self-Healable, High-Stability Anode for Rechargeable Magnesium Batteries Realized by Graphene-Confined Gallium Metal.

In this work, a self-healable, high-stability anode material for rechargeable magnesium batteries (RMBs) has been developed by introducing a core-shell structure of Ga confined by reduced graphene oxide (Ga@rGO). Via this Ga@rGO anode, a specific capacity of 150 mAh g-1 at a current of 0.5 A g-1 stable up to 1200 cycles at room temperature and a specific capacity of 100 mAh g-1 under an ultrahigh current of 1 A g-1 stable up to 700 cycles at a slightly elevated temperature of 40 °C have been achieved. Additionally, the ultrahigh rate, high-cycling stability, and long-cycle life of the anode are attributed to the stabilized structure; such a low-cost, simple, and environmentally friendly direct drop coating (DDC) method is developed to maximize the original state of the active materials. Remarkably, the self-healing ability of anodes is still presented under the ultrahigh charging current. This anode is promising for the development of high rate and high stability RMBs.

Flexible memristors with low-operation voltage and high bending stability based on Cu2AgBiI6 perovskite

Cu2AgBiI6 films were prepared by a one-step spin coating method, and flexible memristors with an Ag/PMMA/Cu2AgBiI6/ITO structure were constructed. The devices showed a bipolar resistive switching behavior with low switching voltage, which is beneficial for reducing energy consumption. Furthermore, this study found that the device exhibits an endurance of about 900 cycles, a higher ON/OFF ratio of over 103, a long retention time (∼104 s), and high stabilities against mechanical stress. Remarkably, the present flexible memristor displayed extraordinary flexibility and stability, with no significant change for the resistive switching behavior even at various bending angles or after undergoing 900 bending cycles. This study establishes that the lead-free halide perovskite Cu2AgBiI6 can be used for the resistive random-access memory of flexible electronics.

The influence of acid rain on asphalt and its mixture performance, simulation and micro-mechanism exploration

Acid rain will destroy asphalt roads and affect human production and life. Therefore, this study has designed a new indoor simulated acid rain erosion test, and explored the effects of acid rain on the properties of 70# petroleum asphalt, SBS asphalt and their mixtures and the acid rain erosion mechanism from the micro and macro perspectives. In this paper, the influence of acid rain erosion on the microscopic properties of asphalt has been revealed through microscopic experiments. Through the combination with the basic performance test of asphalt, the effect of acid rain erosion on the conventional properties of asphalt was studied. The effects of acid rain on the properties of road asphalt mixtures were studied by Marshall immersion and high-temperature rutting tests. The results show that there is no obvious chemical reaction between the two kinds of asphalt after acid rain erosion, but the surface structure and morphology have changed significantly. There was a mass loss, the decreases of the softening point and ductility, and an increase of the penetration; the residual stability and high temperature resistance of both asphalt mixtures were reduced. In the worst case, the quality of petroleum asphalt was lost by 82.2%, the softening point and ductility decreased by 9.6% and 16.9% respectively, the penetration degree increased by 3.1% and the residual stability and dynamic stability of petroleum asphalt mixture decreased by 8.82% and 27.9% respectively. The mass loss of SBS asphalt was 82.5%, the softening point and ductility decreased by 5% and 3.3% respectively, the penetration increased by 2.6%, and the residual stability and dynamic stability of SBS asphalt mixture decreased by 4.82% and 25.4% respectively. In general, under the action of acid rain, the performance of 70# oil asphalt, SBS asphalt and their mixtures are affected to varying degrees. The specific performance is to destroy the original shape of asphalt, resulting in the loss of quality of asphalt, the reduction of deformation resistance, high temperature stability and low temperature stability of asphalt, weakening the high temperature stability and water stability of asphalt mixture, and leading to the decline of road performance.

Boosting the Stability of Subnanometer Pt Catalysts by the Presence of Framework Indium(III) Sites in Zeolite.

Subnanometer metal clusters show advantages over conventional metal nanoparticles in numerous catalytic reactions owing to their high percentage of exposed surface sites, abundance of under-coordinated metal sites and unique electronic structures. However, the applications of subnanometer metal clusters in high-temperature catalytic reactions (>600 °C) are still hindered, because of their low stability under harsh reaction conditions. In this work, we have developed a zeolite-confined bimetallic PtIn catalyst with exceptionally high stability against sintering. A combination of experimental and theoretical studies shows that the isolated framework In(III) species serve as the anchoring sites for Pt species, precluding the migration and sintering of Pt species in the oxidative atmosphere at ≥650 °C. The catalyst comprising subnanometer PtIn clusters exhibits long-term stability of >1000 h during a cyclic reaction-regeneration test for ethane dehydrogenation reaction.

High elongation, low hysteresis, fatigue resistant gel electrolyte for supercapacitor and strain sensor

With the arrival of the era of the Internet of Everything and the popularization of flexible wearable devices, energy supply devices serving flexible wearable devices have also become a research hotspot. Hydrogels are gaining ground in the field of flexible energy supply devices, especially supercapacitors, which have attracted wide attention due to the advantages of fast charging/discharging, high power density, and stability. However, flexible supercapacitor inevitably undergoes varying degrees of deformation during use, and their service life decreases dramatically with the prolongation of use. Therefore, the fabrication of a flexible supercapacitor that can be assembled from hydrogel electrolyte and is fatigue-resistant and stable has become a promising research direction. In this study, we constructed a gel electrolyte with high stretchability, low hysteresis, high stability, and fatigue resistance by designing a dual network structure, and assembled it into a supercapacitor. The device has many excellent features, providing a surface capacitance of 100 mF/cm2, a power density of 0.19 mW/cm2, and an energy density of 425 μWh/cm2 at a frequency of 1 mA/cm2. More importantly, it also exhibits superb stability when subjected to varying degrees of bending and compression. In addition, the gel electrolyte can detect small changes of the human body and quickly and sensitively convert motion signals into electrical signals, showing great potential as a flexible wearable device. This study provides an effective strategy for designing gel electrolytes with low hysteresis and high stability for wider application in flexible electronic devices.

Dual-Factor-Controlled Dynamic Precursors Enable On-Demand Thermoset Degradation and Recycling.

Thermosets are well known for their advantages such as high stability and chemical resistance. However, developing sustainable thermosets with degradability and recyclability faces several principal challenges, including reconciling the desired characteristics during service with the recycling and reprocessing properties required at the end of life, establishing efficient methods for large-scale synthesis, and aligning with current manufacturing process. Here a general strategy is presented for the on-demand degradation and recycling of thermosets under mild conditions utilizing dynamic precursors with dual-factor-controlled reversibility. Specifically, dynamic triazine crosslinkers are introduced through dynamic nucleophilic aromatic substitution (SNAr) into the precursor polyols used in polyurethane (PU) synthesis. Upon removal of the catalyst and alcohol, the reversibility of SNAr is deactivated, allowing for the use of standard PU polymerization techniques such as injection molding, casting, and foaming. The resulting cyanurate-crosslinked PUs maintain high stability and diverse mechanical properties of traditional crosslinked PUs, yet offer the advantage of easy on-demand depolymerization for recycling by activating the reversibility of SNAr under specific but mild conditions-a combination of base, alcohol, and mild heat. It is envisioned that this approach, involving the pre-installation of dual-factor-controlled dynamic crosslinkers, can be broadly applied to current thermosetting plastic manufacturing processes, introducing enhancedsustainability.

Aggregation-induced electrochemiluminescence of an indium-based metal–organic framework and resonance energy transfer strategy for the sensitive detection of β2-microglobulin

This study aimed to construct a novel aggregation-induced electrochemiluminescence (AIECL) system with an indium-based metal–organic framework (In-MOF) as a new luminophore and K2S2O8 as a co-reactant. In the constructed electrochemiluminescence (ECL) system, In-MOF served not only as a novel luminophore but also as a co-reaction accelerator. The In-MOF produced strong cathodic ECL emission over the wavelength range of 425–600 nm. The aggregation-caused quenching effect was overcome by altering the π-π stacking structure of 9,10-di(p-carboxyphenyl)anthracene (DPA) aggregates through coordination with metal ions. The In-MOF exhibited efficient ECL performance and better stability than the DPA ligand. Then, a novel quenched sensor based on the quenching effect of CeO2@PDA on the In-MOF ECL emission was fabricated for detecting β2-microglobulin (β2M). The immunosensor demonstrated an excellent linear relationship with a wide linear range (10 fg/mL – 200 ng/mL) and a low detection limit (2.9 fg/mL, S/N = 3) under optimized experimental conditions. The proposed biosensor had high sensitivity, reasonable specificity, high stability, and reproducibility, thus positively affecting the clinical application of sensing analysis.

Boosting the Stability of Subnanometer Pt Catalysts by the Presence of Framework Indium(III) Sites in Zeolite

AbstractSubnanometer metal clusters show advantages over conventional metal nanoparticles in numerous catalytic reactions owing to their high percentage of exposed surface sites, abundance of under‐coordinated metal sites and unique electronic structures. However, the applications of subnanometer metal clusters in high‐temperature catalytic reactions (>600 °C) are still hindered, because of their low stability under harsh reaction conditions. In this work, we have developed a zeolite‐confined bimetallic PtIn catalyst with exceptionally high stability against sintering. A combination of experimental and theoretical studies shows that the isolated framework In(III) species serve as the anchoring sites for Pt species, precluding the migration and sintering of Pt species in the oxidative atmosphere at ≥650 °C. The catalyst comprising subnanometer PtIn clusters exhibits long‐term stability of >1000 h during a cyclic reaction‐regeneration test for ethane dehydrogenation reaction.

Substrate-Assisted Atomic Dispersion of Cobalt for Alkaline Water Electrolysis.

Atomically dispersed single-atom catalysts have recently attracted broad research interest due to their high atom efficiency and unique catalytic performance. In this study, atomic dispersion of cobalt is achieved using a chemical bath deposition method on a highly stable alkali titanate film (Ti/KTiO). These films were characterized using a variety of techniques, with atomic dispersion confirmed via grazing incidence X-ray absorption spectroscopy and ab initio modeling of single-atom systems. This modeling indicated that the alkali ion incorporated into the film facilitates atomic dispersion. Experimentally, the Ti/KTiO-supported Co(OH)2 catalysts exhibited remarkable electrochemical performance, with an overpotential of 163 mV to achieve a current density of 10 mA cm-2 with a catalyst loading of ∼0.1 mg cm-2 and high stability. These results show the potential of Ti/KTiO/Co(OH)2 catalysts for atomically efficient hydrogen production.