High Resistance Research Articles

Analytical Design and Test of Licorice Harvester Based on DEM–MBD Coupling

This study addresses the issues of high operating resistance, incomplete separation in ascending transport chains, and significant wear and tear in existing licorice harvesters. A new licorice harvester has been designed that incorporates a lift chain conveyor separation device, enabling excavation, separation, collection, and centralized stacking to be completed in a single operation. The paper describes the harvester’s overall structure and provides detailed analyses and designs of its key components, including the digging shovel, roller screen, conveying and separating screens, and soil-crushing roller. Multi-body dynamics (MBD) and discrete element models (DEM) for licorice and soil were developed, and the entire harvesting process was simulated using the coupled DEM–MBD method to analyze the trajectory and speed of the licorice. Field tests confirmed that the conveyor separation screen operates smoothly, effectively separates licorice rhizomes from soil, and minimizes damage to the licorice. Field test results show a net digging rate of 96.2%, a damage rate of 4.3%, and an average digging depth of 580 mm. The operational indexes meet the standards for harvesting root and stem Chinese herbal medicines. The machine operates stably and exhibits exceptional conveying and separating effects, demonstrating its suitability for mechanized harvesting of root and stem herbs.

Effect of Oxide’s Thermophysical Properties on 2205 Duplex Stainless Steels ATIG Welds

Duplex stainless-steel grade 2205 (2205 DSS) is the most widely used of the current duplex materials. The duplex steel alloy is characterized by high strength and high corrosion resistance through enhancing nitrogen and molybdenum contents. The activated tungsten inert gas (ATIG) welding technique uses the same equipment as tungsten inert gas (TIG), but prior to the welding operation, a thin layer of flux is deposited. Activation fluxes are known to influence the shape and energy characteristics of the arc. They promote the change in shapes and dimensions of the welds, namely, increasing the depth and narrowing the weld width. This work is dedicated to investigate the influence of the thermophysical properties of individual metal oxide fluxes on 2205 DSS welding morphology. It helps also to identify the recommended flux properties in order to perform full penetrated ATIG welds. Thirteen kinds of oxides (SiO2, TiO2, Fe2O3, Cr2O3, ZnO, Mn2O3, V2O5, MoO3, Co3O4, SrO, ZrO2, CaO, and MgO) have been tested and three current intensity levels (120, 150 and 180 A) have been considered. The results showed that the main input factors affecting the weld depth (D) were the welding current intensity with a contribution of up to 53.36%, followed by the oxides enthalpy energy with 15.05% and then by the difference between the oxides and the base metal of 2205 DSS (BM 2205 DSS) melting points with a contribution of 9.71% of the data variance. The conditions on individual oxides’ thermophysical properties to achieve full penetrated weld beads have been also revealed.

A reliable protection scheme for high resistance fault detection in wind generator-integrated HVDC transmission system using ensemble of kNN

A reliable protection scheme for high resistance fault detection in wind generator-integrated HVDC transmission system using ensemble of kNN

A collagenase-decorated Cu-based nanotheranostics: remodeling extracellular matrix for optimizing cuproptosis and MRI in pancreatic ductal adenocarcinoma

Pancreatic ductal adenocarcinoma (PDAC), characterized by a dense extracellular matrix (ECM), presents significant therapeutic challenges due to its poor prognosis and high resistance to chemotherapy. Current chemodrugs and diagnostic agents largely fail to cross the barrier posed by the ECM, which severely limits the PDAC theranostics. This study introduces a novel theranostic strategy using thioether-hybridized hollow mesoporous organosilica nanoparticles (dsMNs) for the co-delivery of copper (Cu) and disulfiram (DSF), aiming to induce cuproptosis in PDAC cells. Our approach leverages the ECM-degrading enzyme collagenase, integrated with dsMNs, to enhance drug penetration by reducing matrix stiffness. Furthermore, the innovative use of a pancreatic cancer cell membrane coating on the nanoparticles enhances tumor targeting and stability (dsMCu-D@M-Co). The multifunctional platform not only facilitates deep drug penetration and triggers cuproptosis effectively but also utilizes the inherent properties of Cu to serve as a T1-weighted magnetic resonance imaging (MRI) contrast agent. In vitro and in vivo assessments demonstrate significant tumor size reduction in PDAC-bearing mice, highlighting the dual functionality of our platform in improving therapeutic efficacy and diagnostic precision. This integrated strategy represents a significant advancement in the management of PDAC, offering a promising new direction for overcoming one of the most lethal cancers.Graphical

Microstructure and mechanical properties of new Mg-Zn-Y-Zr alloys with high castability and ignition resistance

Microstructure and mechanical properties of new Mg-Zn-Y-Zr alloys with high castability and ignition resistance

Investigation of Electrochemical Discharge Machining for Tungsten Carbide: Effects of Electrolyte Composition on Material Removal Rate and Surface Quality

Abstract Tungsten carbide (WC-Co) with a cobalt binder has been widely used in industrial application. Through their high wear resistance and hardness, which make it a challenge to machine. Electrochemical discharge machining (ECDM) is a newly developed hybrid technique used to machine conductive and nonconductive materials. Tungsten carbide machining is an area that needs more investigation. In this study, different types of electrolytes have been tested in the electrochemical machining of tungsten carbide. It has been concluded that tungsten carbide was successfully machined with electrolytes that were either neutral salts or a combination of neutral salts and hydroxides, the highest material removal rate achieved was (0.09250 g/min), and the average surface roughness achieved in this work was measured at (Ra 0.9275 µm). However, deposition took place on the surface of machined tungsten carbide when the samples were treated with sodium hydroxide and potassium hydroxide. EDX analysis of successfully machined tungsten carbide samples reveal the presence of carbon (C) due to diffusion from the base material and oxygen (O), most likely due to oxidation brought on by the high temperatures utilized. Scanning electron microscopy confirmed that the machined surfaces had craters, pores, restricted microcracks, and re-deposited melt particles, among other things.

Microbial Life in Playa-Lake Sediments: Adapted Structure, Plastic Function to Extreme Water Activity Variations

Saline shallow lakes in arid and semi-arid regions frequently undergo drying episodes, leading to significant variations in salinity and water availability. Research on the impacts of salinity and drought on the structure and function of biofilms in hypersaline shallow lakes is limited. This study aimed to understand the potential changes of biofilms in playa-lake sediments during the drying process. Sediments were sampled at different depths (surface, subsurface) and hydrological periods (wet, retraction, and dry), which included a decrease in water activity (aw, the availability of water for microbial use) from 0.99 to 0.72. aw reduction caused a greater effect on functional variables compared to structural variables, indicating the high resistance of the studied biofilms to changes in salinity and water availability. Respiration and hydrolytic extracellular enzyme activities exhibited higher values under high aw, while phenol oxidase activity and prokaryote biomass increased at lower aw. This shift occurred at both depths but was more pronounced at the surface, possibly due to the more extreme conditions (up to 0.7 aw). The increased levels of extracellular polymeric substances and carotenoids developed at low aw may help protect microorganisms in high salinity and drought environments. However, these harsh conditions may interfere with the activity of hydrolytic enzymes and their producers, while promoting the growth of resistant prokaryotes and their capacity to obtain C and N sources from recalcitrant compounds. The resilience of biofilms in hypersaline lakes under extreme conditions is given by their resistant biochemichal structure and the adaptability of their microbial functioning.

Novel SNPs Linked to Blast Resistance Genes Identified in Pearl Millet Through Genome-Wide Association Models

Foliar blast, caused by Pyricularia grisea, poses a major challenge to pearl millet (Pennisetum glaucum (L.) R. Br) production, leading to severe yield losses, particularly in rainfed ecologies. This study aimed to elucidate the genetic basis of blast resistance through a genome-wide association study (GWAS) involving 281 diverse pearl millet inbreds. GWAS panel was phenotyped for blast resistance against three distinct isolates of P. grisea collected from Delhi, Gujarat, and Rajasthan locations, revealing a significant variability with 16.7% of the inbreds showing high resistance. Bayesian information and linkage disequilibrium iteratively nested keyway (BLINK) and Multi-Locus Mixed Model (MLMM) models using transformed means identified 68 significant SNPs linked to resistance, with hotspots for resistance-related genes on chromosomes 1, 2, and 6. These regions harbor genes involved in defense mechanisms, including immune response, stress tolerance, signal transduction, transcription regulation, and pathogen defense. Genes, namely 14-3-3-like proteins RGA2, RGA4, hypersensitive-induced response proteins, NHL3, NBS-LRR, LRR-RLK, LRRNT_2, and various transcription factors such as AP2/ERF and WRKY, played a crucial role in the stress-responsive pathways. Analyses of transporter proteins, redox processes, and structural proteins revealed additional mechanisms contributing to blast resistance. This study offers valuable insights into the complex genetic architecture of blast resistance in pearl millet, offering a solid foundation for marker-assisted breeding programs and gene-editing experiments.

Regulation of Interface Compatibility and Performance in Soft Magnetic Composites with Inorganic Insulation Layers by FePO4 Intermediate Transition Layer

In the fabrication of soft magnetic composites, the lattice mismatch between the inorganic insulation layer and the iron matrix often leads to the formation of cracks during the molding process, which significantly impairs the operational performance of the materials. Consequently, it is imperative to develop novel strategies for inorganic insulation coatings that offer high electrical resistivity and thermal stability and are less susceptible to cracking during formation. This paper presents a new structure for soft magnetic composites that incorporates FePO4 as an intermediate transition layer between the iron-based soft magnetic particles and the inorganic ceramic insulation layer. This configuration is designed to provide insulation coatings with superior voltage and thermal resistance, as well as high electrical resistivity. The research details the processes forming the FePO4 intermediate transition layer and the SiO2 insulation layer on the iron powder surface, along with their interaction mechanisms. An analysis comparing the scenarios with and without the FePO4 intermediate transition layer shows its beneficial impact on the magnetic properties and mechanical strength of the soft magnetic composites. Further investigations reveal that at a phosphoric acid concentration of 1 wt.%, the FePO4 layer significantly enhances the interface compatibility between the Fe powder matrix and the SiO2 insulation layer. Under these conditions, the Fe@ FePO4/SiO2 soft magnetic composites demonstrate outstanding overall performance: the saturation magnetization stands at 215.60 emu/g, effective permeability at 83.2, resistivity at 57.42 Ω·m, power loss at 375.0 kW/m3 under 30 mT/100 kHz, and radial compressive strength at 15.95 Kgf. These findings offer novel insights and practical approaches for advancing inorganic insulation coating strategies and provide vital scientific support for further enhancing the magnetic and mechanical properties of soft magnetic composites.

A Stretchable Conductive Material with High Fatigue Resistance for Strain Sensors.

Intrinsically stretchable conductive materials based on elastic substrates and conductive components play important roles in biomedical applications, such as exercise rehabilitation monitoring and disease prediction. A persistent challenge is to combine high fatigue resistance with excellent mechanical properties in stretchable conductive materials. Herein, we present a stretchable conductive material with both good fatigue resistance and high tensile properties (∼3170%) based on poly(acrylic acid)-phytic acid-trehalose-polypyrrole (denoted as PPTP). The as-prepared PPTP hydrogel electrode showed no obvious cracking or delamination after 400 loading and unloading cycles and maintained good electrical signal transmission function after 1000 cycles. We further collected stable signals for human motion and handwriting using the stretchable hydrogel electrode as a strain sensor, demonstrating the potential application of the PPTP stretchable hydrogel electrode in biomedicine.

Strength and microstructural development in concrete pavements by blended copper tailings powder and copper tailings sand

This study investigated the effects of replacing cement with copper tailings powder on pavement concrete performance. Concrete pavements were prepared by substituting 5 %, 10 %, and 15 % of the cement with copper tailings powder. Additionally, 70 % of the river sand (0.6–0.15 mm) was replaced with copper tailings sand of a fixed particle size. The study aimed to understand how this combined replacement affected the mechanical and microstructural properties of the concrete. Tests revealed that two hours of mechanical milling was optimal for activating the copper tailings powder, resulting in a Pozzolanic activity index of 82 %. Concrete specimens with 5 % copper tailings powder achieved the highest flexural strength (6.21 MPa) and compressive strength (52.8 MPa). Furthermore, this replacement level resulted in the lowest porosity and highest resistivity. Scanning electron microscope images revealed that increasing the amount of tailing powder reduced the degree of hydration within the microstructures. However, the specimens with both tailings powder and sand exhibited better compactness and homogeneity in their internal pore structures compared to those with only tailings sand. It suggests a beneficial microfilling effect from the tailings powder.

Preparation and the influence of twist factor on cut resistance performance of Kevlar short fiber covered yarn fabric

This research utilized Kevlar short fibre yarn to cover Kevlar and UHMWPE filaments, resulting in six different types of covered yarns and their associated fabrics. The aim of the research was to examine the impact of the twist factor of Kevlar short fibre yarn and the type of covered yarn on the mechanical properties of the yarns and their corresponding fabrics. The results indicated that the KPf covered yarn with a twist factor of 305 exhibited the highest breaking strength at 13.06cN/dtex, approximately 24% higher than the KKf covered yarn. The 225-KPf covered yarn fabric demonstrated peak breaking strength at 1772.01 N. Under similar conditions, KPf coated yarn outperformed KKf coated yarn in terms of tensile strength. However, KKf covered fabrics exhibited superior cutting resistance compared to KPf covered fabrics, with the 385-KKf fabric having the highest resistance at 1117.29 N. The study concluded that increased twist factor factors lead to varied outcomes in tensile performance and cutting resistance due to changes in inter-fiber spacing and cohesion pressure on the short fiber yarn, as well as the influence of material molecular structure.

Swelling Behavior of Acrylate-Based Photoresist Polymers Containing Cycloaliphatic Groups of Various Sizes

Photoresist polymers containing cycloaliphatic acrylic monomers have been synthesized for use in the microcircuits of semiconductors. Although cycloaliphatic acrylic monomers exhibit a high etch resistance and excellent thermal properties, their large size increases the distance between the main chains of the resulting polymers. This increased distance facilitates the penetration of a developer between the main chains, which leads to swelling and thus pattern collapse, distortion, and delamination, thereby complicating the fabrication of microcircuits. To solve this problem, various large developers were used in previous studies to reduce the swelling effect. However, these developers could not easily dissolve the unexposed regions of the resist. To overcome this issue, we designed photoresist polymers with smaller functional groups to decrease the degree of swelling. Specifically, ArF photoresist polymers were synthesized from monomers with various sizes of functional groups. We confirmed that the polymer synthesized using cyclohexyl methacrylate (CHMA), which had the smallest functional group, exhibited the shortest distance between the main chains. Consequently, this polymer showed the least swelling, with a swelling ratio of 109%. In contrast, the polymers synthesized using isobornyl acrylate (IBOA) and dicyclopentanyl methacrylate (TCDMA), which have large functional groups, exhibited greater distances between the main chains, resulting in swelling ratios of 114% and 112%, respectively. The polymer with a swelling ratio of 109% showed excellent patterning properties, while those with swelling ratios of 114% and 112% were delaminated by the developer. Our work introduces a novel approach to help reduce the swelling effect and achieve high-quality patterns in negative photoresists.

COMPUTER SIMULATION OF ELECTRICALLY CONDUCTING PROPERTIES OF MATERIAL FOR PERSONAL PROTECTION EQUIPMENT

The article presents an analysis of production factors that have a harmful effect on the health of workers. It has been established that one of the leading factors is an increased electrostatic field that occurs when a static charge accumulates on the surface of materials. An increased level of the electrostatic field can lead to various negative consequences for workers’ health. For full antistatic protection at work, not only special tools and workplaces are needed, but also special footwear made of conductive materials with high surface resistance, as well as other personal protective equipment. A computer model for simulating the occurrence and development of an electrical breakdown in a protective material for personal protective equipment is described. The model is based on energy concepts of the occurrence and development of a discharge, taking into account the statistical heterogeneity of the material’s electrical conductivity. The process of breakdown development is considered as a special case of the percolation effect and a branching random process. The model makes it possible to find a relationship between the heterogeneity of the material and the threshold of its protective properties.

Fine Engineering of d-Orbital Vacancies of ZnN4 via High-Shell Metal and Nonmetal Single-Atoms for Efficient and Poisoning-Resistant ORR.

Atomically dispersed metal-nitrogen-carbon (M-N-C) materials are active oxygen reduction reaction (ORR) catalysts. Among M-N-C catalysts, ZnN4 single-atom catalysts (SACs) due to a nearly full 3d10 electronic configuration insufficiently activate oxygen and display low ORR activity. To finely engineer d-orbital vacancies of ZnN4, we combine high-shell metal and nonmetal SAs as electronic regulators that are ZnN4Cl and carbon vacancy-hosted -Cl motifs, which show complementary electron-withdrawing capacities versus the ZnN4. Under that, the ZnN4 exhibits significantly enhanced ORR activity with a half-wave potential (E1/2) of 0.912 VRHE relative to the unmodified ZnN4 (E1/2 = 0.822 VRHE) and simultaneously robust durability (negligible activity loss after 10,000 potential cycles). Particularly, the engineered ZnN4 possesses high resistance to SCN- poisoning, which is rarely achieved among M-N-C SACs. Our works show that combining high-shell metal and nonmetal SAs can finely engineer d-orbital vacancies of metal centers to an optimal state, thereby intrinsically enhancing their catalytic performance.

Impact of Light on Coexistence of Memresistance, Meminductance, and Memcapacitance (MEMRIC) in Nanostructured Copper Oxide (CuO) Based Random Access Memory Devices.

We demonstrated the coexistence of memresistance, memcapacitance, and meminductance non-volatile bipolar analog resistive switching in Cu (top electrode)/CuO (active layer)/SS (bottom electrode) memory devices with and without presence of the light. The onset of memcapacitance and meminductance is noticed from the pinched-shaped characteristics in the first and third quadrants. The variation in the scan rate also impacts the coexistence characteristics by shifting the intercept point for low resistance (LRS) and high resistance (HRS) states in positive and negative biasing voltages. The durability and retention are measured over a period of 150 cycles and 1500 s with and without light illumination. The slopes for the Weibull cumulative distribution plot for set/reset state with and without light are 106.80/114.23 and 70.21/102.25, respectively, suggesting that the stability of the device increases with light illumination. Interestingly, the memcapacitance disappears after 600 cycles and after 60 . The double logarithmic I-V characteristics suggest the trap-assisted conduction (higher slope >2) in the higher external electric field, and Ohmic behavior in the lower applied field region. Thus, the present study provides a way for low-power electronics and photoresistors together with memresistance, memcapacitance, and meminductance, simultaneously, i. e., MEMRIC in a single device.

Nanomaterials in Solid-State Batteries: Enhancing Safety and Performance

Solid-state batteries (SSBs), utilizing solid electrolytes instead of liquid ones, represent a promising advancement in energy storage technology due to their higher energy density and enhanced safety. Despite their potential, SSBs face significant challenges such as high interfacial resistance, low ionic conductivity, and high production costs. Recent advancements in nanomaterial technology have offered innovative solutions to these issues. Nanomaterials with high specific surface areas and controllable morphologies optimize interfacial contact, reduce resistance, and enhance ionic conductivity through efficient ion transport channels. Additionally, surface modifications and doping improve the chemical and thermal stability of SSB components, extending battery life and preventing adverse reactions. Although initial preparation costs are high, advancements in production technology and large-scale manufacturing are expected to lower these costs, facilitating commercialization. Future research should focus on new nanostructure designs, nanocomposites, and interfacial engineering to further enhance battery performance and safety. Understanding the influence of nanomaterials on safety performance and improving thermal and mechanical shock resistance are crucial for the reliable implementation of solid-state batteries in practical applications.

Development and characterization of a novel wheat-rye T2DS·2DL-2RL translocation line with high stripe rust resistance

Rye (Secale cereale L.), a close relative of common wheat, represents a valuable genetic resource for enhancing the disease resistance of common wheat. Introducing novel rye-derived genes into wheat can potentially improve disease resistance. In this study, we successfully developed a novel wheat-rye derivative line LCR4 through hybridization between hexaploid triticale line Currency and common wheat cultivar Jimai 22 (JM22). We confirmed that LCR4 was a T2DS·2DL-2RL translocation line via comprehensive molecular cytogenetic analyses, including genomic in situ hybridization, multi-color fluorescence in situ hybridization, molecular marker analysis, and wheat SNP-arrays genotyping. Notably, upon inoculation with Puccinia striiformis f. sp. tritici (Pst) race V26 at the seedling stage and mixed Pst races at the adult stage, LCR4 exhibited robust resistance against stripe rust infection at both stages. Subsequent genetic analysis further elucidated that the translocated 2RL chromosome segment is responsible for this resistance. Consequently, LCR4 harboring elite agronomic traits can be effectively employed in breeding programs against stripe rust.

Multidrug Resistant Pseudomonas aeruginosa in Clinical Settings: A Review of Resistance Mechanisms and Treatment Strategies

Pseudomonas aeruginosa is causing increasing concern among clinicians due to its high mortality and resistance rates. This bacterium is responsible for various infections, especially in hospital settings, affecting some of the most vulnerable patients. Pseudomonas aeruginosa has developed resistance through multiple mechanisms, making treatment challenging. Diagnostic techniques are evolving, with rapid testing systems providing results within 4–6 h. New antimicrobial agents are continuously being developed, offering potential solutions to these complex clinical decisions. This article provides a review of the epidemiology, at-risk populations, resistance mechanisms, and diagnostic and treatment options for Pseudomonas aeruginosa.

The genome landscape of the Xinglong buffalo

BackgroundXinglong buffalo, as an indigenous breed in Hainan province of China, possesses characteristics such as high humidity tolerance, disease resistance and high reproductive capacity. Combined with whole genome sequencing technology, comprehensive investigation can be undertaken to elucidate the genomic characteristics, functions and genetic variation of Xinglong buffalo population.ResultsXinglong buffalo has the highest genetic diversity, lowest runs of homozygosity average length, and fasted decay of linkage disequilibrium in our study population. Phylogenetic tree results revealed that Xinglong buffalo was gathered together with Fuzhong buffalo firstly. The population genetic structure analysis indicates that at K = 3, the Xinglong buffalo for the first time showed a distinct ancestral origin from other water buffalo. Furthermore, compared to different populations, candidate genes displaying significantly distinct patterns of single nucleotide polymorphisms (SNPs) (e.g., RYR2, COX15, PCDH9, DTWD2, FCRL5) distribution have been identified in the Xinglong buffalo.ConclusionsBased on the whole genome sequencing data, this study identified a substantial number of SNPs and assessed the genetic diversity and selection signatures within the Xinglong buffalo population. These results contribute to understanding the genomic characteristics of Xinglong buffalo and their genetic evolutionary status. However, the practical significance of these signatures for genetic enhancement still requires confirmation through additional samples and further experimental validation.