High Response Research Articles

Cytomegalovirus immune responses are associated with lower serum NfL and disability accumulation risk at multiple sclerosis onset.

Infection by cytomegalovirus (HCMV) and Epstein-Barr virus (EBV) play a prognostic role in multiple sclerosis (MS). To explore whether humoral immune responses to HCMV and EBV at disease onset were associated with changes in serum and cerebrospinal fluid (CSF) levels of inflammatory and neurodegeneration biomarkers. Ninety-eight MS patients with a median follow-up of 20 years were included in the study. The levels of a panel of nine biomarkers were measured in serum (N = 60) and CSF (N = 61) samples of patients at the time of the first demyelinating event. Immune responses to HCMV inversely correlated with serum neurofilament light chain (sNfL) levels (rho = -0.367; p = 0.039). sNfL levels were reduced in patients with high immune responses to HCMV (p = 0.006). Elevated sNfL levels were associated with higher risk of Expanded Disability Status Scale (EDSS) 3.0 (p = 0.016), 4.0 (p = 0.009) and 6.0 (p = 0.003), and with higher risk of developing secondary progressive MS (p = 0.003) and to receive treatment (p = 0.032). Serum soluble CD21 levels were increased in patients with high immune responses to EBV nuclear antigen 1 (p = 0.020). High immune responses to HCMV are associated with limited disease progression and central nervous system (CNS) injury in MS patients. These findings reinforce the protective role of HCMV infection in MS.

Venetoclax Combined With FLAG-IDA in Refractory or Relapsed Acute Myeloid Leukemia.

The prognosis of patients with refractory or relapsed AML (R/R-AML) is very limited. To (re)achieve complete remission, there has recently been increasing evidence that the combination of venetoclax (VEN) with chemotherapy is associated with improved outcomes. Our retrospective, single-center study of 53 R/R-AML patients with a median follow-up time of 11.0 months compared standard salvage chemotherapy (FLAG-Ida or HAM in n = 35 patients) with a combination of venetoclax (VEN) and FLAG-Ida (FLAVIDA in n = 18 patients) concerning safety and efficacy. Regarding the primary endpoints, there was a statistically significant increased eventfree survival (EFS) in the FLAVIDA group compared to patients with standard chemotherapy based on the univariate log-rank-test and in the multivariate Cox regression analysis (HR 0.22 [95% CI 0.05, 0.97]). There were no differences between the two groups in terms of patients developing febrile neutropenia CTCAE III° and IV° or a delay in hematological recovery. In addition, a clear trend towards an improved overall response rate (78% vs. 51%) was demonstrated in the FLAVIDA group. The FLAVIDA regimen represents a promising treatment alternative for R/R AML patients with a high response rate and significantly improved EFS compared to standard chemotherapy.

FRACTAL DIFFUSION IN AN ISOTROPOUS MEDIUM

This paper provides a comprehensive examination of fractal diffusion in an isotropic medium. This process has a fascinating temporal memory and an extremely high initial response, which are unquestionably characterized by the Caputo fractional derivative. Its spatio-symmetric property is described by the Riesz fractional derivative. To illustrate the diffusion mechanism, we present an example of a toxic gas leak in a subway station. The numerical results are extremely promising and challenging. They clearly indicate that a MEMS-based gas sensor can track a toxic gas leak immediately due to its extremely fast diffusion at the initial time. This is of great importance for public safety. Furthermore, the diffusion process is primarily contingent upon the density of the air, which we can easily control. The diffusion pattern in an isotropic medium exhibits fractal behavior, which is extremely helpful for designing an emergency system for evacuating people from the center of toxic gas leaks by changing air density or temperature. This paper presents a rigorous mathematical concept for monitoring systems and early warning systems for toxic gas leaks.

Unprecedented Silver‐Based Hybrid Pyroelectric Enabling Wide Spectral Photo‐Pyroelectricity for Birefringence Photomodulation

Birefringent crystal, which has the capacity to manipulate polarization light, holds an indispensable position in optics and optoelectronics, while it remains challenging to fulfill the modulation of birefringence. Here, we present wide spectral photo‐pyroelectric effect in a silver‐based hybrid pyroelectric, (N‐CHM)Ag2I3 (N‐CHM = N‐cyclohexylmethylamine), serving as a feasible strategy to regulate birefringence through light stimuli. As the first silver‐based hybrid pyroelectric, (N‐CHM)Ag2I3 exhibits strong room‐temperature photo‐pyroelectricity with a large polarization of ~3.23 μC/cm2 and high voltage responsivity of ~0.96 m2/C across the UV−NIR spectral region. Strikingly, the photomodulation of its in‐plane birefringence is established through pyroelectric effect, giving a saturation value of ~1.68×10−2 that is among the highest level achieved to date. This study on the birefringence photomodulation of lead‐free hybrid pyroelectric is anticipated to boost future development of new smart optical and optoelectronic devices.

Unprecedented Silver-BasedHybrid Pyroelectric EnablingWide Spectral Photo-Pyroelectricity for BirefringencePhotomodulation.

Birefringent crystal, which has the capacity to manipulate polarization light, holds an indispensable position in optics and optoelectronics, while it remains challenging to fulfill the modulation of birefringence. Here, we present wide spectral photo-pyroelectric effect in a silver-based hybrid pyroelectric, (N-CHM)Ag2I3 (N-CHM = N-cyclohexylmethylamine), serving as a feasible strategy to regulate birefringence through light stimuli. As the first silver-based hybrid pyroelectric, (N-CHM)Ag2I3 exhibits strong room-temperature photo-pyroelectricity with a large polarization of ~3.23 μC/cm2 and high voltage responsivity of ~0.96 m2/C across the UV-NIR spectral region. Strikingly, the photomodulation of its in-plane birefringence is established through pyroelectric effect, giving a saturation value of ~1.68×10-2 that is among the highest level achieved to date. This study on the birefringence photomodulation of lead-free hybrid pyroelectric is anticipated to boost future development of new smart optical and optoelectronic devices.

Fast Responsive and Highly Sensitive Ethanol Gas Sensors Designed by Agar‐Laponite Hybrid Hydrogels

AbstractLaponite, a synthetic nanosilicate clay and agar, a natural polysaccharide, both imbibe large amount of water and form into hydrogels. Various physical and chemical stimuli elicit the hydrogel response, which has been applied in designing diverse sensors and biomedical systems. In this work, we exploit the change in hydrogel's ionic conductivity due to volatile organic compounds (VOCs) (e. g. ethanol) interaction with the surfaces of Laponite‐Agar hybrid hydrogel films. Gas sensing studies are carried out on silicon (Si) and flexible polyethylene terephthalate (PET) substrates by monitoring the resistance changes. Pristine Laponite hydrogel has shown increase in resistance as it interacted with the ethanol, whereas pure agar and Laponite‐Agar have shown decrease in resistance. Moreover, Laponite‐Agar gel films have exhibited high sensitivity, fast response (4 s) and recovery time (15 s) with lowest detection limit of 6 ppm. Selectivity test carried shows high ethanol sensing response and exhibited very good reproducibility. Observed responses and sensing mechanism are discussed based on changes in ionic conduction resulted due to interacting ethanol with the gel surface network structure. Present study paves the way for understanding and designing low cost, soft and flexible hydrogel gas sensors.

Dose-dependent responses to canonical Wnt transcriptional complexes in the regulation of mammalian nephron progenitors

In vivo and in vitro studies argue that concentration dependent Wnt signaling regulates mammalian nephron progenitor cell (NPC) programs. Canonical Wnt signaling is regulated through the stabilization of β-catenin, a transcriptional co-activator when complexed with Lef/Tcf DNA binding partners. Utilizing the GSK3β inhibitor CHIR99021 (CHIR), to block GSK3β-dependent destruction of β-catenin, we examined dose-dependent responses to β-catenin in NPCs, using mRNA transduction to modify gene expression. Low CHIR-dependent proliferation of NPCs was blocked on β-catenin removal with evidence of NPCs arresting at the G2-M transition. While NPC identity was maintained following β-catenin removal, mRNA-seq identified low CHIR and β-catenin dependent genes. High CHIR activated nephrogenesis. Nephrogenic programming was dependent on Lef/Tcf factors and β-catenin transcriptional activity. Molecular and cellular features of early nephrogenesis were driven in the absence of CHIR by a mutated, stabilized form of β-catenin. Chromatin association studies indicate low and high CHIR response genes are likely direct targets of canonical Wnt transcriptional complexes. Together these studies provide evidence for concentration dependent Wnt-signaling in the regulation of NPCs and provide new insight into Wnt targets initiating mammalian nephrogenesis.

Immunotherapy and Radiotherapy for Older Patients with Locally Advanced Non-Metastatic Non-Small-Cell Lung Cancer Who Are Not Candidates for or Decline Surgery and Chemotherapy: A Practical Proposal by the International Geriatric Radiotherapy Group.

The standard of care for locally advanced non-small-cell lung cancer (NSCLC) is either surgery combined with chemotherapy pre- or postoperatively or concurrent chemotherapy and radiotherapy. However, older and frail patients may not be candidates for surgery and chemotherapy due to the high mortality risk and are frequently referred to radiotherapy alone, which is better tolerated but carries a high risk of disease recurrence. Recently, immunotherapy with immune checkpoint inhibitors (ICIs) may induce a high response rate among cancer patients with positive programmed death ligand 1 (PD-L1) expression. Immunotherapy is also well tolerated among older patients. Laboratory and clinical studies have reported synergy between radiotherapy and ICI. The combination of ICI and radiotherapy may improve local control and survival for NSCLC patients who are not candidates for surgery and chemotherapy or decline these two modalities. The International Geriatric Radiotherapy Group proposes a protocol combining radiotherapy and immunotherapy based on the presence or absence of PD-L1 to optimize the survival of those patients.

Vertical van der Waals Integrated p‐W0.09Re0.91S2 /GaN Heterojunction for Ultra‐High Detectivity UV Image Sensing

AbstractThe relentless advancement of van der Waals (vdW) heteroepitaxy technology has charted an expansive horizon for the integration and functionalization of heterogeneous materials. In this research, a 2D/3D vdW heterojunction photodetector based on p‐W0.09Re0.91S2/n‐GaN integrated on a Free‐standing (FS)‐GaN substrate, encompassing horizontal, quasi‐vertical, and vertical structures is have successfully fabricated. By incorporating a suite of performance enhancement strategies, including mixed‐dimensional stacking, p‐type doping, type‐II band alignment, and vertical structure design, the developed vertical structure photodetector has exhibited exceptional performance. Specifically, the detector achieves a high Responsivity of up to 497.60 A W−1, an impressive specific Detectivity of 8.41 × 1013 Jones, and a fast response speed (rise/decay time of 10 ms/20 ms). Additionally, the device is successfully applied in the realm of single‐pixel imaging, substantiating its potential for practical applications. The findings of this work not only signify notable strides in integration and optoelectronic performance within the optoelectronic device domain but also portend novel breakthroughs in imaging technology applications, bestowing renewed vigor and endless potential upon the evolution of this field.

Photochemical Fabrication of Ag‐Modified Hierarchical Cu@Cu2O/CuO Nanocomposite Toward Room Temperature NO2 Detection

Developing room temperature (RT) gas sensor based on metal oxide semiconductor material has long been challenging. Herein, a 1D hierarchical Ag‐modified Cu@Cu2O/CuO nanocomposite has been designed by low‐temperature etching self‐assembly combined with photochemical deposition method based on Cu nanowires (NWs). After a step of alkaline solution etching, the surface of Cu NWs is self‐assembled to form a hierarchical Cu@Cu2O/CuO, and then Ag nanoparticles are modified on its surface by photochemical deposition to obtain the desired material. All the preparation processes are carried out at RT and have good controllability. When applied as sensing material, the optimal Cu@Cu2O/CuO/Ag nanocomposite exhibits high response of ≈337.0 to 10 ppm NO2 with excellent selectivity and fast response/recovery (60/400 s) at 25 °C. It is worth noting that such a strategy of loading Ag nanoparticles improves its gas sensitivity by about 42.4 times, and the resulting sensor shows good sensitivity and screening ability to NO2 in the low concentration range. Finally, the nanostructure of the material is characterized systematically and the sensing mechanism is discussed.

High Responsivity of Sol-gel TiO2NPs/Si Photodetectors Deposited by Spin Coating Method

High Responsivity of Sol-gel TiO2NPs/Si Photodetectors Deposited by Spin Coating Method

Crack-Based Composite Flexible Sensor with Superhydrophobicity to Detect Strain and Vibration.

Vibration sensors are widely applied in the detection of faults and analysis of operational states in engineering machinery and equipment. However, commercial vibration sensors with a feature of high hardness hinder their usage in some practical applications where the measured objects have irregular surfaces that are difficult to install. Moreover, as the operating environments of machinery become increasingly complex, there is a growing demand for sensors capable of working in wet and humid conditions. Here, we present a flexible, superhydrophobic vibration sensor with parallel microcracks. The sensor is fabricated using a femtosecond laser direct writing ablation strategy to create the parallel cracks on a PDMS film, followed by spray-coating with a conductive ink composed of MWCNTs, CB, and PDMS. The results demonstrate that the developed flexible sensor exhibits a high-frequency response of up to 2000 Hz, a high acceleration response of up to 100 m/s2, a water contact angle as high as 159.61°, and a linearity of 0.9812 between the voltage signal and acceleration. The results indicate that the sensor can be employed for underwater vibration, sound recognition, and vibration monitoring in fields such as shield cutters, holding significant potential for mechanical equipment vibration monitoring and speech-based human-machine interaction.

All-printed MXene/WS2-based flexible humidity sensor for multi-scenario applications

As non-contact sensing, non-invasive medical diagnostics and environmental humidity monitoring technologies advance, the demand for high-performance humidity sensors is becoming increasingly apparent. Ti3C2Tx MXene is an attractive humidity-sensitive candidate due to its excellent chemical activity and hydrophilic surface. However, achieving fast responsiveness and high sensitivity of dynamic changes in humidity is still challenging. Herein, this work introduced a WS2-modified Ti3C2Tx MXene composite material as humidity sensing material with superior sensing performance. Then sodium carboxymethyl cellulose solution was added to the Ti3C2Tx MXene/WS2 composite material to adjust viscosity of the composite material, enabling the formulation of printable humidity-sensitive ink. Utilizing screen-printing technology, a mass-producible humidity sensor (CMXW2) was successfully fabricated. Experimental results show that the sensor has short response and recovery times of 4.65 s/1.33 s in the relative humidity of 11–97 % with a high humidity response of 1707 % and excellent mechanical properties. The efficacy of the humidity sensor for skin moisture monitoring, real-time respiration monitoring, and non-contact switch was also evaluated. The successful demonstration of multi-scenario applications using the CMXW2 humidity sensor opens up new possibilities and applications in the fields of smart healthcare and non-contact sensing.

Synergistic effects of anionic surfactant doping on dielectric and electro-optical properties of nematic liquid crystals by cyano-ionic interactions

Modern research has long focused on controlling and optimizing the dielectric, electro-optical and optical attributes of liquid crystals (LCs) to increase their technological value. Numerous approaches have been investigated for this reason in an effort to overcome various issues such as high response time, high driving voltage requirements, low dielectric anisotropy and limited operating temperature range, etc. The strategy utilizing binary/multicomponent systems is the most investigated and seems to have the most potential out of all the other techniques. In keeping with the same subject, the influence of anionic surfactant on the dielectric, electro-optical, and optical properties of nematic LC (NLC) has been examined. Precisely, dodecane-1-sulfonic acid sodium salt (SDS) which is an anionic surfactant was dispersed in a room temperature NLC E7 at various concentrations. Our findings reveal a significant alteration in the electro-optical behavior resulting from the introduction of an anionic surfactant, extending well beyond the instance of electrode polarization, albeit with a detrimental impact on performance within the low-frequency range as a result of increased ionic contribution. The main findings of this study include a 17.5%% increase in dielectric anisotropy, an appreciable reduction of about 30%% in threshold voltage and rotational viscosity, and approximately 64% reduction in response time in the host NLC due to the addition of anionic salt in it. A significant photoluminescence quenching of about 64%% is observed after dispersion of 3.0% by weight anionic surfactant in E7. These findings offer potential pathways for the development of future technologies in various domains, including photonic devices, biological imaging, light-emitting diodes (LEDs), and luminescent markers.

Magnetostrictive bi-perceptive flexible sensor for tracking bend and position of human and robot hand

The sensor that simultaneously perceives bending strain and magnetic field has the potential to detect the finger bending state and hand position of the human and robot. Based on unique magneto-mechanical coupling effect of magnetostrictive materials, the proposed a bi-perceptive flexible sensor, consisting of the Co–Fe film and magnetic sensing plane coils, can realize dual information perception of strain/magnetic field through the change of magnetization state. The sensor structure and interface circuit of the sensing system are designed to provide high sensitivity and fast response, based on the input–output characteristics of the simulation model. An asynchronous multi-task deep learning method is proposed, which takes the output of the position task as the partial input of the bending state task to analyze the output information of the sensor quickly and accurately. The sensing system, integrating with the proposed model, can better predict the bending state and approach distance of human or robot hand.

Synergistic effect of rGO decoration on ZnFe2O4 nanorods for low concentration detection of ammonia at room temperature with high selectivity and response

This study introduces an improved sensor for detecting ammonia (NH₃) gas using Zinc Ferrite (ZF) decorated with reduced graphene oxide (rGO) films, prepared through spray pyrolysis and spin coating methods. NH₃, a major pollutant in fertilizer production, poses significant health and environmental risks even at low concentrations. Therefore, detecting NH₃ below exposure limits (25 ppm) is crucial for protecting ecosystems and human health. The prepared optimal rGO concentration and ZF (ZFG1.5) sensor exhibit excellent NH₃ response (45) towards 1 ppm, which is sevenfold better than the ZF film without rGO decoration. This enhancement is attributed to the ZF nanorods on the surface of the rGO, establishing a firm surface interaction with the ZF. This configuration accelerates electron transfer and promotes the adsorption/desorption of gas molecules, further contributing to the improved gas-solid interaction. Besides, the sensor demonstrated excellent repeatability (1.15 %), long-term stability, and high humidity tolerance (coefficient of variation 1.48 %). Additionally, the ZFG1.5 sensor showed a distinct selectivity for NH₃ in a mixed gas environment. The ZFG1.5 sensor is promising for real-time NH₃ monitoring below exposure limits, making it a valuable tool for environmental and health safety.

Safety and immunogenicity of mRNA-based seasonal influenza vaccines formulated to include multiple A/H3N2 strains with or without the B/Yamagata strain in US adults aged 50–75 years: a phase 1/2, open-label, randomised trial

Inclusion of additional influenza A/H3N2 strains in seasonal influenza vaccines could expand coverage against multiple, antigenically distinct, cocirculating A/H3N2 clades and potentially replace the no longer circulating B/Yamagata strain. We aimed to evaluate the safety and immunogenicity of three next-generation seasonal influenza mRNA vaccines with different compositions that encode for haemagglutinins of multiple A/H3N2 strains, with or without the B/Yamagata strain, in adults. This randomised, open-label, phase 1/2 trial enrolled healthy adults aged 50-75 years across 22 sites in the USA. Participants were randomly assigned (1:1:1:1:1:1:1) via interactive response technology to receive a single dose of mRNA-1011.1 (pentavalent; containing one additional A/H3N2 strain [Newcastle]), mRNA-1011.2 (quadrivalent; B/Yamagata replaced with one additional A/H3N2 strain [Newcastle]), mRNA-1012 at one of two dose levels (pentavalent; B/Yamagata replaced with two additional A/H3N2 strains [Newcastle and Hong Kong]), or one of three quadrivalent mRNA-1010 controls each encoding one of the A/H3N2 study strains. The primary outcomes were safety, evaluated in all randomly assigned participants who received a study vaccination (safety population), and reactogenicity, evaluated in all participants from the safety population who contributed any solicited adverse reaction data (solicited safety population). The secondary outcome was humoral immunogenicity of investigational mRNA vaccines at day 29 versus mRNA-1010 control vaccines based on haemagglutination inhibition antibody (HAI) assay in the per-protocol population. Here, we summarise findings from the planned interim analysis after participants had completed day 29. The study is registered with ClinicalTrials.gov, NCT05827068, and is ongoing. Between March 27 and May 9, 2023, 1183 participants were screened for eligibility, 699 (59·1%) were randomly assigned, and 696 (58·8%) received vaccination (safety population, n=696; solicited safety population, n=694; per-protocol population, n=646). 382 (55%) of the 696 participants in the safety population self-reported as female and 314 (45%) as male. Frequencies of solicited adverse reactions were similar across vaccine groups; 551 (79%) of 694 participants reported at least one solicited adverse reaction within 7 days after vaccination and 83 (12%) of 696 participants reported at least one unsolicited adverse event within 28 days after vaccination. No vaccine-related serious adverse events or deaths were reported. All three next-generation influenza vaccines elicited robust antibody responses against vaccine-matched influenza A and B strains at day 29 that were generally similar to mRNA-1010 controls, and higher responses against additional A/H3N2 strains that were not included within respective mRNA-1010 controls. Day 29 geometric mean fold rises in HAI titres from day 1 against vaccine-matched A/H3N2 strains were 3·0 (95% CI 2·6-3·6; Darwin) and 3·1 (2·6-3·8; Newcastle) for mRNA-1011.1; 3·3 (2·7-4·1; Darwin) and 4·2 (3·4-5·2; Newcastle) for mRNA-1011.2; 3·4 (2·9-4·0; Darwin), 4·5 (3·6-5·5; Newcastle), and 5·1 (4·2-6·2; Hong Kong) for mRNA-1012 50·0 μg; and 2·6 (2·2-3·1; Darwin), 3·7 (3·0-4·6; Newcastle), and 4·1 (3·3-5·1; Hong Kong) for mRNA-1012 62·5 μg. Inclusion of additional A/H3N2 strains did not reduce responses against influenza A/H1N1 or influenza B strains, and removal of B/Yamagata did not affect responses to B/Victoria. These data support the continued clinical development of mRNA-based next-generation seasonal influenza vaccines with broadened influenza A/H3N2 strain coverage. Moderna.

2D Gr/WSe2/MoTe2 vertical heterojunction for self-powered photodiode with ultrafast response and high sensitivity

Two-dimensional materials without lattice constraints can be combined into form heterojunctions via van der Waals forces, providing opportunities for the future development of novel high-performance photodetectors. In non-vertical heterojunction devices with long carrier transport channels, SRH recombination due to defect and interface states in the heterojunction and Langevin recombination due to Coulomb interactions induce large amounts of photogenerated carrier recombination, leading to low quantum efficiencies of the heterojunction. At the same time, defect and interface trap states, as well as the long channel of the non-vertical heterojunction device, lead to a slow response speed of the device. In this work, a 2D WSe2/MoTe2 vertical heterojunction photodiode with a transparent graphene top electrode has been designed to simultaneously achieve high sensitivity and fast response speed of photodetectors. Benefiting from the vertical device structure, high-quality interface and low contact resistance, the photogenerated electron-hole pairs can be efficiently separated and transported. The photodiode exhibits remarkable rectification characteristics with a rectification ratio as high as 1.4 × 104, and provides a broadband and self-powered photodetection from the visible to NIR bands (405–1064 nm) with a maximum responsivity of 0.33 A/W at 785 nm. In particular, the photodiode achieves an ultra-fast rise/fall time of 6.49/6.22 μs at 0 V and a further reduction of the response time to 1.68/1.2 μs at a reverse bias of −1 V. This ultra-fast response allows the photodiode to detect switching signals with a cutoff frequency of more than 70 kHz and 200 kHz at 0 V and −1 V, respectively. This work opens up new opportunities for the development of integrated 2D photodetectors with low power consumption, high sensitivity, and high speed.

Bio-responsive polymers for dual 31P/19F-magnetic resonance to detect reactive oxygen species in vivo

Biocompatible metal-free agents are emerging as a promising alternative to commercial magnetic resonance (MR) contrast agents, but there is an additional need for novel probes with enhanced responsiveness in preclinical MR testing to effectively target diverse pathological conditions. To address this, we develop hydrophilic phospho-/fluoropolymers as dual MR probes. Incorporating thiophosphoester groups (P = S) into the polymer structure produces a distinct chemical shift (~59 ppm) in phosphorus MR (31P-MR), reducing biological signals interference. Reactive oxygen species (ROS) oxidize the P = S groups, causing a detectable shift in 31P-MR, enabling precise localization of ROS, abundant in inflammation and cancer. To enhance this capability, bioinert trifluoromethyl groups (CF3) are added, creating a “hotspot” for fluorine MR (19F-MR), aiding in vivo localization. Both in vitro and in vivo testing demonstrate the probe’s high specificity and responsiveness, underscoring its potential as a sensitive ROS sensor and dual MR-traceable tool in cancer research.

A Latent Profile Analysis of Religious Parents' Responses to Their Sexual and Gender Diverse Child.

Prior research indicates that religious parents can have negative, positive, or ambivalent responses to their child's sexual orientation and gender identity (SOGI). Yet, to our knowledge no research has quantitatively examined patterns of sexual and gender diverse (SGD) youth's perceptions of their religious parents' responses to their SOGI. Without examining variations in these patterns, we are unable to better understand the experiences of SGD youth with religious parents. In the current paper, we examined patterns of SGD youth's perceptions of their religious parents' SOGI-specific rejection, acceptance, and SOGI change efforts. We also examined if these patterns differed by SGD youth's individual and contextual factors. The analytic sample consisted of online responses from 5,686 SGD youth (Mage = 15.95). We found four distinct profiles: Positive Parental Response, Moderate Negative Parental Response, Low Parental Response, and High Negative Parental Response. The largest profile was the Positive Parental Response, suggesting that many SGD youth perceived positive responses from their religious parents. SGD youth with diverse gender identities and intersecting identities, such as race/ethnicity, were more vulnerable to religious parents' negative responses. Findings have implications for existing resources and programs aimed at strengthening SGD youth's relationship with their religious parents.