Leaching Of Heavy Metals Research Articles

Roles of the SOM and clay minerals in alleviating the leaching of Pb, Zn, and Cd from the Pb/Zn smelter soil: Multi-surface model and DFT study

Soil organic matter (SOM) and clay minerals are important sinks for reactive heavy metals (HMs) and exogenous hydrogen ions (H+). Therefore, HMs are likely to be released into soil porewater under acid rainfall conditions due to the competitive adsorption of H+. However, negligible Lead, Zinc, and Cadmium (<6 ‰) in the Pb/Zn smelter soil were leached, and the effects of SOM and clay minerals on HMs leaching were unclear. Herein, the H+ consumption and HMs redistribution on SOM and clay minerals were quantitated by the multi-surface model and density functional theory calculations to reveal the roles of SOM and clay minerals in alleviating HMs' leaching. Clay minerals consumed 43.2 %–52.0 % of the exogenous H+, serving as the dominant sink for the exogenous H+ due to its high content and hindering H+ competitive adsorption on SOM. Protonation of the functional groups constituted >90 % of the total H+ captured by clay minerals. Meanwhile, some H+ also competed with HMs for adsorption sites on clay minerals due to its 0.497-fold to 1.54-fold higher binding energies than HMs, resulting in the release of HMs. On the contrary, SOM served as an accommodator for taking over the released HMs from clay minerals. The HMs complexation on the low-affinity sites (R-L−) of SOM was responsible for the recapture of HMs. In Ca-enriched soil, the released HMs were also recaptured by SOM via ion exchange on the R-L-Ca+ and the high-affinity sites (R-H-Ca+) sites due to the 30.8 %–178 % higher binding energies of HMs on these sites than those of Ca. As a result, >63.4 % of the released HMs from clay minerals were transferred to the SOM. Thus, the synergy of SOM and clay minerals in alleviating the leaching of HMs in Pb/Zn smelter soils cannot be ignored in risk assessment and soil remediation.

Preparation and property studies of ferric sulfoaluminate cement based on Bayer red mud and phosphogypsum.

The Bayer red mud (RM) and phosphogypsum (PG) accumulation have caused significant environmental contamination. However, practical and effective resource utilization technologies are still lacking currently. This work aims to develop ferric sulfoaluminate cement (FSAC) employing low-cost materials including Bayer red mud, phosphogypsum, and other materials. This method effectively improves the utilization rate of Bayer red mud and phosphogypsum. Under the premise of ensuring the performance of FSAC, the utilization rate of solid waste can reach up to 48.56%. The effects of different red mud dosages on cement mineral formation, workability, and mechanical properties are investigated. Then, untreated phosphogypsum is adopted as a retarder for FSAC, and the hydration process, working properties, mechanical properties, types of hydration products, and morphology of FSAC are explored. The results suggest that the crystal transformation of Ye'elemite is promoted with the increase of Bayer red mud content. Cubic crystal system Ye'elemite with higher hydration activity is generated, which increases the early strength of cement but greatly reduces the setting time, hindering the later strength growth. Untreated phosphogypsum can effectively delay the early hydration process of FSAC, prolong the setting time of cement, and increase the strength of FSAC in the later stage. When the dosage of Bayer red mud and phosphogypsum is 17.64% and 9.21%, respectively, with phosphogypsum dosage of 20%, the prepared FSAC has satisfactory mechanical properties, and the 3-day and 90-day compressive strengths are 34.6 MPa and 57.1 MPa, respectively. In addition, the study of heavy metal leaching indicates that the FSAC prepared by Bayer red mud, phosphogypsum, and other raw materials will generate no environment pollution, and the solidification of heavy metal elements in the cement slurry is superior.

Preparation and characterization of cementitious materials from dedioxinized and dechlorinated municipal solid waste incineration fly ash and blast furnace slag

To address the resource utilization issue of MSWI fly ash, a method has been proposed to prepare cementitious materials using harmlessly processed MSWI fly ash (HPFA). After washing and thermal treatment, The physicochemical properties of HPFA were characterized using QXRD, ICP, XRF, and GC-MS. Cementitious materials were prepared using HPFA, gypsum and blast furnace slag (BFS) as raw materials, Through XRD, TG, FTIR, TEM, and SEM-EDS methods, the hydration and hardening characteristics were investigated, and the leaching of heavy metals from solidified materials in simulated surface water and landfill environments was evaluated using ICP-MS. The results indicate that the harmless treatment can effectively reduce the chloride content and dioxins in MSWI FA but still contains heavy metals. The addition of HPFA (10%-50%) can enhance the compressive strength of cementitious materials, accelerate the exothermic process of cement hydration, and increase the total heat release of hydration, implying an improvement in the degree of hydration of the system.HPFA could effectively promote the hydration of gypsum and BFS, resulting in the higher formation of ettringite and C-(A)-S-H（C/S=1，Al/Si=0.3）.The formation of C(Mg/Fe)-(A)-S-H suggests that the Fe-Mg solid solution phase in HPFA may have participated in the hydration reaction. The increased stability of highly cross-linked (Q4) silicate tetrahedral structure with time implies that the material may have good durability. The leaching amount of heavy metals met the standards of Class I surface water in GB3838–2002 and GB5085.3–2007 which implies that the material has environmental safety. This study innovatively provides a preparation path for harmless MSWI fly ash and cementitious material ratios, reveals the hydration mechanism of HPFA in cementitious materials, evaluates the solidification ability of heavy metals, and provides important ideas for the resource utilization of MSWI fly ash.

Evaluation of asphalt film thickness and heavy metal leaching of oxidizing slag used as an aggregate material in dense-graded asphalt concrete.

Electric-arc-furnace (EAF) steelmaking uses scrap iron and steel as raw materials. Scrap iron and steel originate from complex sources and may contain heavy metal components which can leach into the environment over time due to wear-and-tear. A by-product of the EAF steelmaking process is oxidizing slag, and approximately 1.2 million metric tons is produced every year in Taiwan alone. This study investigated substitution of natural aggregates with oxidizing slag in dense-graded asphalt concrete. We evaluated the water resistance and asphalt film thickness of the oxidizing slag substituted asphalt concrete and further explored the performance of oxidizing slag as paving material. We determined the dissolved and total amounts of heavy metals in the oxidizing slag, comparing these results with current regulatory controls to assess the environmental compatibility of the oxidizing slag. We found that due to the complicated sources of oxidizing slag, the basic properties should be analyzed on a batch-to-batch basis. Furthermore, we recommend trial mixing before upscaling the production of oxidizing slag substituted dense-graded asphalt concrete to confirm the mixing time required to achieve uniformity. The results also show that in comparison to natural aggregates used in asphalt concrete, oxidizing slag exhibits superior performance in terms of increased asphalt film thickness and improved water resistance. Furthermore, oxidizing slag as an aggregate material was associated with decreased heavy metal leaching and reduced environmental pollution. The results of the toxicity characteristic leaching procedure (TCLP) met regulatory requirements. However, the microwave-assisted aqua-regia digestion procedure showed heavy metal concentrations exceeding the monitoring standards for food crops. Considering environmental compatibility, it is recommended that controlling the total amount of heavy metals in oxidizing slag should be included in regulatory requirements. Furthermore, we should prohibit the use of materials such as oxidizing slag and other steel furnace slag in the roadways adjacent to edible crop farmlands.

Immobilization properties and reaction mechanism of municipal solid waste incineration fly ash with alkali activation technology

Municipal solid waste incineration fly ash (MSWIFA) needs proper treatment prior to security landfilling because of considerable amounts of heavy metals and soluble chloride. Nowadays, alkali activation technology has become an effective solidification/stabilization (S/S) technology for MSWIFA. But few studies have been systematically carried out on the preparation techniques and reaction mechanism of MSWIFA S/S body. The effects of the technical parameters (alkali activator, sodium silicate modulus, alkali equivalent, water-solid ratio, curing regime) on the immobilization properties (compressive strength and heavy metal leaching toxicity) of MSWIFA S/S bodies were studied in this work. The hydration characteristics and reaction mechanism were also explored in depth based on the structure properties and microstructure characterization. Ca2+, Na+, SiO42−, [Al(OH)4]-, OH− dissociated from MSWIFA and alkali activator solution chemical reaction to form the silicates, aluminates and aluminosilicates with lower polymerization, and promoted the gel hydration products formation via depolycondensation. Lower Ca/Si molar ratio was conductive to the formation of amorphous substance, compactness of matrix pore structure and immobilization properties. Compared to the hydration products including halite, sylvine, glauberite, gypsum, calcite crystal, C–S–H gel contributed much more to the pore structure and strength improvement of MSWIFA S/S bodies. These findings will provide valuable theoretical basis for MSWIFA management and resource utilization promotion.

Solidification and Release Characteristics of Heavy Metals in Gypsum from Coal-Fired Power Plants

Heavy metals in flue gas desulfurization (FGD) gypsum from coal-fired power plants are at risk of releaching during the processes of stockpiling and resource utilization. In this study, the effects of organosulfur chelators dithiocarbamate (DTC) and trisodium trithiocyanate-15 (TMT-15) on the solidification characteristics of heavy metals in desulphurized gypsum under different mass fractions, pH values, water contents and reaction times were investigated. The chemical composition and morphology were analyzed by inductively coupled plasma atomic emission spectrometer (ICP-AES) and scanning electron microscope (SEM). The experiments showed that both DTC and TMT-15 were effective at stabilizing the heavy metals in the FGD gypsum, with more than a 50% curing effect for all the heavy metals except Pb. DTC showed a better stabilization for Pb, Hg, Cu, Zn, and Cr, and TMT-15 showed a better curing effect for Cd. The solidified gypsum had good heavy metal stability in low-water-content environments. Increasing the mass fraction, reaction time, and pH decreased the heavy metal leaching, and the mass fraction had the greatest effect on the total heavy metal leaching concentration, followed by the reaction time and pH value.

Migration of various ions based on pH shifts triggered by the application of sediment microbial fuel cells.

Sediment microbial fuel cells (SMFCs) represent a technology that can enhance sediment quality through processes such as nutrient suppression while simultaneously generating electricity from microorganisms. Despite its importance in elucidating the principles of nutrient suppression, the complex behavior of various ions within this context has been rarely explored. Herein, we applied an SMFC and systematically evaluated alterations in ion concentrations in interstitial and overlying waters. The SMFC deployment substantially decreased Na+ concentrations and increased Cl- levels in the interstitial water. This intriguing phenomenon was attributed to reactions driven by the electrodes. These reactions induced remarkable shifts in pH. Consequently, this pH shift triggered the leaching of heavy metals, particularly Fe, and decreased HCO3- concentrations within the interstitial water, thereby inducing the migration of other ions, including Na+ and Cl-, as compensation. Moreover, the PO43- concentration in interstitial water showed an increasing trend upon SMFC application, which contradicts the results of several previous reports. This increase was primarily attributed to the release of PO43-caused by the leaching of Fe salts, which was triggered by the pH shift. These findings provide new insights into sediment improvement research through SMFCs, enhancing our understanding of the fundamental principles and broadening the potential applications of this technology.

Paper mill wastes and biochar improve physiochemical properties and reduce heavy metals leaching risks in podzolic soils

Background: The incorporation of industrial wastes, such as wood ash and paper sludge, as soil amendments is vital for both environmental sustainability and agroecosystem productivity. Herein, we evaluated the effects of wood ash and paper sludge alone and in combination with biochar on the physicochemical properties and heavy metal leaching risks in podzolic soils. Methods: The treatments included limestone (control), wood ash, paper sludge, wood ash+paper sludge, limestone+biochar, wood ash+biochar, paper sludge+biochar and wood ash+paper sludge+biochar, arranged in a 4 × 2 factorial design with three replicates. The Hydrus-1D model was employed to simulate the water movement under these soil amendments using leaching colums. Results: Overall, wood ash, paper sludge and biochar application significantly increased the pH of amended soil compared to control. Paper sludge amended treatments alone or in combination with biochar significantly decreased bulk density (8%–17%) and increased the total porosity (14%–25%). While biochar addition to wood ash and paper sludge significantly reduced the concentrations of Cd (by 6.42%), Co (by 10.95%), Cu (by 11.76%), Pb (by 30%) and Ni (by 3.75%) in the collected leachates. The treatment paper sludge + biochar was found to be the most effective treatment to retain the heavy metals, with maximum plant available water (0.28 cm3 cm−3) and field capacity (0.36 cm3 cm−3) compared to control treatment. The predictions from Hydrus-1D showed that paper mill wastes with biochar has a significant potential to increase the volumetric moisture contents of amended podzolic soil, with the simulated leaching times and saturation levels closely aligning with the measured values. Conclusion: paper sludge + biochar treatment showed improved soil physicochemical properties and displayed lower heavy metals than allowed limits to be used in soil. Further, experiments are needed to assess the effects of papermill waste products on podzolic soil properties under variable field conditions.

Effect of ball milling-Ca(OH)2 coupling activation on the cementitious properties of ferrous extraction tailing of nickel slag: Basic properties, hydration mechanism and heavy metal safety

In order to improve the reactivity of ferrous extraction tailing of nickel slag (FETNS), This paper delves into the influence of ball milling-activator Ca(OH)2 on the cementitious activity of FETNS. Furthermore, it assesses the combined activation's impact on the working performance, mechanical properties, shrinkage properties, early hydration process, hydration products, and heavy metal element leaching of the FETNS-OPC composite cementitious system. The results show that the coupling activation significantly enhanced the reactivity of FETNS and prolonged the acceleration period of the composite cementitious system during the hydration process, thereby promoting the hydration reaction. This not only shortened the setting time of the composite cementitious system, but also significantly improved its early compressive strength. The microscopic test results showed that the coupling activation improved the reaction degree of the composite cementitious system, promoted the formation of more reaction products, and increased the compactness of the internal structure. In addition, the coupling activation also enhanced the degree of polymerization of the composite cementitious system, and these factors together led to an increase in compressive strength. However, it is worth noting that with the increase of FETNS reactivity under the coupling activation, the autogenous shrinkage change rate and drying shrinkage change rate of the composite cementitious system also increased accordingly. Finally, the results of the heavy metal leaching test showed that the coupling activation reduced the leaching value of heavy metal elements in FETNS, ensuring the safety of practical application.

Assessment of Ambient Water Quality Deterioration in Proximity to Municipal Solid Waste Dumpsites in Urban Areas of Chattogram, Bangladesh

This study aims to assess the impact of waste dumping on groundwater quality within the Chattogram City Corporation area. Monitoring eight groundwater sampling points over four years, various physical and chemical parameters were analyzed, utilizing the APHA method. Parameters assessed include pH, temperature, dissolved oxygen (DO), electrical conductivity (EC), total dissolved solids (TDS), salinity, biological oxygen demand (BOD), chemical oxygen demand (COD), Turbidity, Total Hardness, Ca-Hardness, Alkalinity, TSS, Chloride, Phosphate, Sulphate, Nitrite, Nitrate, Fluoride, Iron, Arsenic, Zinc, Copper, and Chromium. The findings were compared to the Department of Environment's (DoE) recommended values, as well as the Bangladesh standard and World Health Organization (WHO) values. During sample collection, deep tube wells near the dumping site points were prioritized. According to the investigation CNB, Ananda Bazar Halishahar and Arefin Nagar, deep pump water carries too many irons in their groundwater. Iron levels exceed both WHO and Bangladesh standards across all samples. Specifically, Arefin Nagar and Ananda Bazar Halishahar area sampling points S6, S7, and S8 surpass standards in TDS, Total Hardness, Turbidity, TSS, Chloride, and Iron. Water Quality Index (WQI) calculations suggest unsuitability for drinking purposes in all sampled water, with S5 and S8 demonstrating particularly high values, indicating their unsuitability for human consumption. Heavy Metal Pollution Index (HPI) calculations reveal a decrease at CNB sampling points S1 and S2, where waste dumping ceased in 2017. However, HPI values at other points show an increasing trend, indicating the leaching of heavy metals from solid waste into groundwater. S5 and S8 exhibit notably high HPI values (Average 464.99 and 319.59), suggesting an accumulation of heavy metals in the groundwater. Carcinogenic Risk Analysis of Arsenic highlights the failure of most sampled water to meet Carcinogenic Risk (CR) standards, signalling a potential cancer risk with prolonged use of this water.

Investigating the potential of mineral precipitation in co-pyrolysis biochar: Development of a novel Cd (II) adsorption material utilizing dual solid waste

Ionic cadmium (Cd (II)) in water is a significant threat to ecosystems, the environment, and human health. Research is currently focused on developing efficient adsorption materials to combat Cd (II) pollution in water. One promising solution involves co-pyrolyzing solid residue from anaerobic digestion of food waste with oil-based drill cuttings pyrolysis residue to create a biochar with high organic matter content. This biochar has a lower heavy metal content and leaching toxicity compared to China's national standards, making it both safe and resourceful. It exhibits a high adsorption capacity for Cd (II) in water, reaching up to 47.80 ± 0.37 mg/g. Raising the pyrolysis temperature above 600 °C and increasing the amount of pyrolysis residue beyond 30 % enhances the biochar's adsorption capacity. The adsorption process is primarily driven by mineral precipitation, offering a promising approach for dual waste resource management and reducing heavy metal pollution.

Valorization of biomass bottom ash in alkali-activated GGBFS-fly ash: Impact of biomass bottom ash characteristic, silicate modulus and aluminum-anodizing waste

Growing production of green energy from biomass has led to a surge in biomass bottom ash (BBA) generation, often relegated to landfills due to high leachable heavy metal content. This study proposed solidifying BBA in alkali-activated granulated ground blast furnace slag (GGBFS) and class F fly ash (CFA) blended binders. Investigations into the influence of BBA content, fineness, silicate modulus of activators, and aluminum-anodizing waste (AAW) on solidification performance were conducted, focusing on reaction mechanisms, phase assemblages, mechanical properties and leaching behavior. Results indicate relatively low reactivity of BBA and high leachable chloride (Cl-), sulphate (SO42-), chromium (Cr), molybdenum (Mo), lead (Pb) and zinc (Zn) contents from BBA. Increased BBA substitution leads to strength deterioration, while ground biomass bottom ash (GBBA) improves the mechanical performance slightly. This improvement is attributed to the increased reactive aluminosilicate content and an enhanced packing system resulting from finer particles. However, GBBA induces an increased heavy metals leaching. Higher silicate modulus activators enhance mechanical properties and reduce the leaching of Mo and Cl-, while lower silicate modulus activator accelerates the reaction process, promoting the formation of hydrotalcite-like phases and reducing the leaching of Cr and SO42-. Incorporating 0.5 wt% aluminum-anodizing waste improves immobilization efficiency of toxic ions, but further increases in dosage lead to higher leaching due to weakened mechanical performance. Overall, hybrid binders with 10 wt% G/BBA exhibit desirable mechanical properties, along with sufficient immobilization of leachable heavy metals, enabling their use as potential construction materials.

Accelerated carbonation of incineration fly ash (IFA) and its impact on inhibiting heavy metals leaching and removal of soluble salts

This study analysed the composition and leaching results for 12 IFA samples from a local incineration plant by XRF and leaching tests based on BS EN12457-1:2002. XRF results show that the main elements are Ca, Cl and S in all IFA samples. Leaching test results shows a high leachability of Na, Cl, Br, Pb, Zn and Cu. The accelerated carbonation with (NH4)2CO3 was attempted to inhibit heavy metals leaching and remove soluble salts. The effect of (NH4)2CO3 concentration on carbonation efficiency and inhibition of heavy metal leaching was systematically investigated. TGA and ICP-MS were used to determine carbonation capacity and heavy metal leaching, respectively. TGA results show the maximum carbonation capacity is achieved in one hour with 10 wt% (NH4)2CO3 and 76% carbonation occurs -in the first 10 min. Leaching test results reveal that Cu and Pb are efficiently immobilised when the concentration of (NH4)2CO3 is as low as 2 wt% with a s/l ratio of 1:5 within 1 hr. Increasing the concentration of (NH4)2CO3 to 4 wt%, the leaching rate of Zn is also below NEA RVs (National Environment Agency of Singapore). Carbonation is also effective to immobilise Cd and Ni, but not for Cr since it exists as CrO42- and cannot be carbonated. XRF results from a larger scale reaction confirm the significant removal of soluble salts, and lower leachability (except SO42-) is substantiated by leaching tests. By integrating the processes of CO2 capture with ammonia and accelerated carbonation, our work contributes to CO2 sequestration and IFA detoxification.

Innovative synthesis of low-carbon cemented backfill materials through synergistic activation of solid wastes: An integrated assessment of economic and environmental impacts

The accumulation of large amounts of steel slag (SS) and oil shale residue (OSR) causes serious pollution due to the lack of effective ways to utilize them. In this study, OSR, SS, and soda residue (SR) were used to synergistically prepare all-solid-waste low-carbon cemented backfill material (ALCCB). No cement and chemical additives were added to this material, and synergistic activation enabled full utilization of the solid wastes. The total solid waste utilization rate was 100 %. The mechanical characteristics of the ALCCB and the heavy metal leaching rates were determined. The unconfined compression strength of the ALCCB after 28 days was 5.97 MPa, while the slump was 205 mm. These results met the performance requirements for a filling material. The leaching rates for the heavy metals after 28 days conformed to the guidelines for Class III groundwater quality. The mechanism underlying synergistic hydration of the solid wastes was analyzed at the micro- and macroscale with X-ray diffraction (XRD), thermogravimetric analysis (TG), scanning electron microscopy (SEM), and mercury intrusion porosimetry (MIP). The results indicated that hydration of the ALCCB occurred continuously during curing, and the faster early hydration reaction stabilized heavy metal curing at 7 d. In addition, ALCCB offers greater economic and environmental advantages than cementitious materials. Notably, the economic and environmental benefits of ALCCB were found to supersede those of cement-based materials, with a cost reduction of 42.6 % and a CO2 emission reduction of 86.9 %. This innovative low-carbon mine backfill material effectively promotes the utilization of solid waste resources and supports sustainable development.

Leaching of polycyclic aromatic hydrocarbons and heavy metals from stored reclaimed asphalt pavement

The construction, maintenance, and expansion of roads results in the generation of huge quantities of milled asphalt viz. reclaimed asphalt pavement (RAP). However, recycling of RAP is rarely followed in developing countries such as India. Due to rainfall, stockpiled RAP in open areas may generate leachate containing polycyclic aromatic hydrocarbons (PAHs) and heavy metals, raising concern about the stockpiling of RAP. This study addresses the environmental concerns associated with the possible leaching of PAHs and heavy metals from RAP by batch leaching procedures. The leachate predominantly contained three-, and five-ring PAHs. ΣBenzo(k)fluoranthene (ΣBkF) showed the highest concentration (397 µg/kg), followed by ΣPhenanthrene (ΣPHE) (290 µg/kg) among the all sixteen PAH compounds analysed. The results showed that the leaching potential of RAP was rather weak; hence RAP cannot be classified as hazardous waste. Further, none of the samples exceeded the soil risk-based threshold (RBT) values of PAH for residential or commercial settings indicating negligible risk.

Heavy metal leaching from wood ash before and after hydration and carbonation

AbstractWood ashes can be used, e.g., as soil fertilizer or in construction materials; however, it is important to ensure that such use will not cause spreading of heavy metals and subsequent harm to the environment. Wood fly ashes (WFAs) generally have higher concentrations of heavy metals than wood bottom ashes. This paper focuses on the leaching of heavy metals from WFA, specifically identifying WFA characteristics that influence the leaching and changes in leaching caused by hydration and carbonation in ambient air. Chemometric modeling based on characteristics for eight different WFAs suggested that the leaching of Cr and Zn was associated with the concentration of K and the leaching of SO42−, indicating a connection to the soluble K2(SO4) commonly found in WFAs. During the aging, both pH and conductivity of the WFAs decreased showing the formation of new phases. The leaching of Cd, Cu, Ni, and Pb was low initially and decreased to non-measurable after the aging. So did the leaching of Zn except from one of the WFAs. Thus, the part of the heavy metals, which were leaching originally, was built into the newly formed phases. The Cr leaching also showed a general decrease during the aging, however, not to similarly low levels. This means that the leaching Cr fraction was either not influenced by the aging processes or the formed phases contained water-soluble Cr. The continued leaching of Cr needs more attention as it may be the toxic and carcinogenic Cr(IV). As the chemistry and mineralogy of WFAs, inclusive of the mobility of the heavy metals, are subject to changes, increased knowledge on the chemistry determining these changes is needed to choose environmentally sound recycling options.

Study of a Fire-Resistant Plate Containing Fly Ashes Generated from Municipal Waste Incinerator: Fire and Mechanical Characteristics and Environmental Life Cycle Assessment.

The recycling of fly ash from municipal solid waste incineration is currently a global issue. This work intends to examine the viability of a novel recycling alternative for fly ashes as a component of fire-resistant plates. To lessen the quantity of heavy metal leaching, the fly ash was utilized after being washed using a water/fly ash ratio of 2 for one hour. Subsequently, an inexpensive, straightforward molding and curing process was used to create a plate, with a composition of 60%wt of MSWI-FA, 30%wt of gypsum, 0.5%wt of glass fiber and 9.5%wt of vermiculite. The plate exhibited high fire resistance. Furthermore, it demonstrated compression, flexural strength and surface hardness slightly lower than the requirements of European Standards. This allows for manufacturing plates with a high washed MSWI-FA content as fire protection in firewalls and doors for homes and commercial buildings. A Life Cycle Assessment was carried out. The case study shows that a 60% substitution of gypsum resulted in an environmental impact reduction of 8-48% for all impact categories examined, except four categories impacts (marine eutrophication, human toxicity (cancer), human non-carcinogenic toxicity and water depletion, where it increased between 2 and 718 times), due to the previous washing of MSWI-FA. When these fly ashes are used as a raw material in fire-resistant materials, they may be recycled and offer environmental advantages over more conventional materials like gypsum.

Fly ash treatment via conventional and microwave-assisted organic acid leaching: kinetics and life cycle assessment.

Heedless disposal of oil-based fly ash contributes to the contamination of the air, water, and soil. Acid leaching of industrial solid wastes is recognized as a versatile, cost-effective, and environmentally friendly solid waste treatment approach. The present study investigated the viability of conventional leaching (CL) and microwave-assisted leaching (MAL) of predominant heavy metals from Mazut-burnt fly ash. For this purpose, the practicality of four organic acids with various specifications (ascorbic, gluconic, citric, and oxalic acids) on the dissolution efficiency of fly ash components was examined. Utilization of oxalic acid led to achieving full V recovery, complete Fe removal, and Ni enrichment in the residue in both CL and MAL setups. The Ni content of the sample was enriched from 6% in the calcinated sample to 23.7% in the oxalic acid leaching residue. Using citric acid resulted in the co-extraction of V, Ni, and Fe with nearly 70% V, 50% Ni, and 89% Fe dissolved in CL. The dissolution efficiencies were slightly lower in MAL. Oxalic acid was selected as the most promising organic acid reagent for fly ash treatment, so its CL kinetics was studied and defined by the shrinking particle model. The model showed that the controlling steps in the leaching of V differ over time, changing from a chemical reaction before 60min to fluid film diffusion or mixing afterward. The kinetic study proved MAL as an effective technique in overcoming the leaching kinetic barriers. A life cycle assessment study was conducted to determine the environmental impacts of the proposed process. Accordingly, the MAL using oxalic acid was the most environmentally friendly process among the studied ones, and the utilization of microwaves leads to the reduction of the leaching processes' environmental impacts by decreasing the processing time.

Red mud modified phosphogypsum based self-leveling mortar: Hydration mechanism, heavy metal migration law and spatial distribution characteristics

In the production processes of phosphoric acid and alumina, chemical enterprises generate solid waste such as red mud (RM), phosphogypsum (PG), and fly ash (FA). The environmentally friendly utilization of these waste materials is of crucial significance. Therefore, this study focuses on investigating the impact of collaborative modification using diverse solid wastes on the macroscopic properties and internal microstructure of self-leveling mortar. Through a careful selection process, the optimal ratio for red mud and phosphogypsum self-leveling mortar(RPSM) has been identified during the research. This study not only provides substantial support for the effective utilization of solid waste but also contributes to the improvement of overall performance and structural characteristics of the mortar. Based on this, the hydration characteristics, leaching patterns, and spatial distribution characteristics of heavy metals in RPSM were evaluated. The research revealed that the optimal ratios of RM, PG, FA, PC, river sand, and heavy calcium carbonate powder in RPSM were 20.7%, 13.8%, 17.1%, 13.8%, 17.3%, and 17.3%, respectively. Under a water-binder ratio of 0.18, the flexural and compressive strength of the mortar specimens after 14 d of curing can reach 4.3 and 31.6 MPa. Through comprehensive analysis and discussion of the performance, microstructure, and dynamics of the hydration process of RPSM, the main processes of mortar hydration were elucidated. Environmental risk assessments indicated no environmental risks from heavy metals in RPSM. Human health risk assessment suggested carcinogenic risks from Cr and Cd in RPSM through oral exposure, leading to restrictions on the content of characteristic heavy metals in different application scenarios. Furthermore, fitting results of the release kinetics of heavy metals indicated that the leaching of heavy metals in RPSM can be well fitted with kinetic models, allowing the determination of the optimal safe age of RPSM containing harmful heavy metals. Finally, using interpolation and vertical distribution simulation by software such as ArcGIS, the spatial distribution characteristics of heavy metals in RPSM during use were analyzed. The research can supply fundamental academic support for the recycling of solid wastes like RM and the control of environmental risks associated with heavy metal leaching in building materials.

IJCM_265A: Cellular Consequences of Fruit Juice Metallurgy: A Closer Look at Heavy Metal Influence

Background: The leaching of heavy metals from packaging materials into packed juices can have several adverse effects on the quality and safety of the products and potentially pose health risks to consumers. Objective: The research aimed to investigate the cytotoxic effects of heavy metals specifically vanadium, cadmium, arsenic, and mercury, which are commonly found in packaging materials of marketable fruit juices which are leached into juices itself (orange and mixed fruit juices stored in cans, leak- proof bags, and tetraPaks). Methodology: The study utilized cell lines, namely HepG2 (human liver cancer) and HeK293 (human kidney), to assess the impact of these heavy metals on cellular viability, DNA damage, mitochondrial function, and cell cycle progression. Flow cytometry was used to analyse cell cycle alterations. Results: The MTT assay showcased dose-dependent decrease in cell viability with increasing concentrations of heavy metals. Annexin V Assay determined V, Hg and As had necrotic death pattern while Cd had apoptotic death pattern for both the cell lines in presence of heavy metal digests. Cells treated with heavy metals, and the resulting DNA damage observed to be high after quantified using comet tail length, olive tail movement, and tail moment measurements. Mitochondrial function assays in the presence of heavy metals revealed that increased mitochondrial membrane potential, mitochondrial mass, and reactive oxygen species production. ROS generation assessed to understand the impact of heavy metals on cellular health and oxidative stress. Conclusion: This study shed light on the potential cytotoxic effects of heavy metals found in fruit juices. These findings contribute to our understanding of the potential risks associated with heavy metal exposure from consumer products and emphasize the importance of regulatory measures to ensure food safety and human health.