Hair-like Sensors Research Articles

Design and Development of a Hair-like Sensor with Bridge-Type Flexible Amplification Mechanisms.

Compared with lever-type amplification mechanisms, bridge-type flexible amplification mechanisms have advantages in terms of amplification ratio and structural compactness. Therefore, they can effectively replace the lever-type amplification mechanism in the existing hair-like sensors and realize the development of miniature hair-like sensors with high sensitivity. With that in mind, a highly sensitive hair-like sensor based on a bridge-type amplification mechanism with distributed flexibility is presented to measure the airflow rate. First, the structural composition and operating principle of the hair-like sensor are described. Then, detailed design and analysis of the hair-like sensor are carried out, focusing on the design of the hair post structure, amplification mechanism, and resonator. Furthermore, the designed hair-like sensor is processed and prepared, and some experimental studies are conducted. The experimental results demonstrate that the developed hair-like sensor can measure the airflow rate with high sensitivity up to 8.56 Hz/(m/s)2. This provides a new concept for the structural design of hair-like sensors and expands the application of bridge-type flexible amplification mechanisms in the field of micro/nano sensors.

Elastic Organic Crystals as Bioinspired Hair-Like Sensors.

One of the typical haptic elements are natural hairy structures that animals and plants rely on for feedback. Although these hair sensors are an admirable inspiration, the development of active flow sensing components having low elastic moduli and high aspect ratios remains a challenge. Here, we report a new sensing approach based on a flexible thin and optically transmissive organic crystal of high aspect ratio, which is stamped with fluorescent dye for tracking. When subjected to gas flow and exposed to laser, the crystal bends due to exerted pressure and acts as optical flow sensor with low detection limit (~1.578 ms-1) and fast response time (~2.70 s). The air-flow-induced crystal deformation and flow dynamics response are modelled by finite element analysis. Due to the simple design, light-weight, and mechanical robustness, this prototypical crystal hair-like sensor opens prospects for a new class of sensing devices from wearable electronics to aeronautics.

Microstructured Scales in Porous Piezoresistive Vibration Sensor with Strain‐Rate‐Adaptive Gauge Factor

AbstractFlexible vibration sensors extend vibration sensor applications to wearable devices that can detect the body's mechano‐vibration signatures. In addition, the sensors act as a good interface in the curved shapes of machinery for better measurement. Such flexible vibration sensors that comprise ultrahigh displacement sensitivity and good dynamic response can be developed by using highly sensitive mechanisms such as crack‐based sensors (CBS) or hair‐like sensors (HLS). In this work, a porous piezoresistive sensor is fabricated by coating porous poly‐dimethyl siloxane (PDMS) with graphene elastomer ink to create a conductive network in the porous structure. Squamous microstructured scales are observed on the pore walls due to a coating of graphene elastomer ink on the expanded porous structure and contracting back to its original shape. It is assumed that the scales on the pore walls impact electromechanical characterization by imparting strain‐rate adaptability and dynamic resistance. Additionally, the developed sensors display a highly distinct segmented gauge factor in different strain rates in quasi‐static characterization, and the gauge factor increases proportionally to the strain rate. Consequently, the sensor can detect vibrations in a bandwidth of 1–1000 Hz and respond to acceleration from 0.01–1.01 g.

Mechanosensory Hairs and Hair-like Structures in the Animal Kingdom: Specializations and Shared Functions Serve to Inspire Technology Applications.

Biological mechanosensation has been a source of inspiration for advancements in artificial sensory systems. Animals rely on sensory feedback to guide and adapt their behaviors and are equipped with a wide variety of sensors that carry stimulus information from the environment. Hair and hair-like sensors have evolved to support survival behaviors in different ecological niches. Here, we review the diversity of biological hair and hair-like sensors across the animal kingdom and their roles in behaviors, such as locomotion, exploration, navigation, and feeding, which point to shared functional properties of hair and hair-like structures among invertebrates and vertebrates. By reviewing research on the role of biological hair and hair-like sensors in diverse species, we aim to highlight biological sensors that could inspire the engineering community and contribute to the advancement of mechanosensing in artificial systems, such as robotics.

Artificial Hair-Like Sensors Inspired from Nature: A Review

Nature creatures have evolved excellent receptors, such as sensory hairs in arthropods, lateral line system of fishes. Researchers inspired by nature creatures have developed various mechanical sensors. Here, we provide an overview on the development of Artificial Hair-Like (AHL) sensors based on the inspiration of hair flow sensory receptors, especially sensory hairs in arthropods and lateral line systems of fishes. We classify the developed AHL sensors into several categories according to the operating principles they based on, for example, piezoresistive and piezoelectric effects. The current challenges and existing problems in the development of AHL sensors are also present, which were primarily restricted by the exploratory tools of sensing mechanism of creatures and current manufacturing technologies. In future, more efforts are required in order to further improve the performance of AHL sensors. We expect that intelligent multi-functional AHL sensors can be applied not only in applications like navigation of underwater automatic vehicles, underwater search and rescue, tap-water metering, air monitoring and even in medicare, but also potentially be used in space robots to detect complex topography.

Bat-inspired integrally actuated membrane wings with leading-edge sensing

This paper presents a numerical investigation on the closed-loop performance of a two-dimensional actuated membrane wing with fixed supports. The proposed concept mimics aerodynamic sensing and actuation mechanisms found in bat wings to achieve robust outdoor flight: firstly, variable membrane tension, which is obtained in bats through skeleton articulation, is introduced through a dielectric-elastomer construction; secondly, leading-edge airflow sensing is achieved with bioinspired hair-like sensors. Numerical results from a coupled aero-electromechanical model show that this configuration can allow for the tracking of prescribed lift coefficient signals in the presence of disturbances from atmospheric gusts. In particular, disturbance measurements through the hair sensor (a feedforward control strategy) are seen to provide substantial advantage with respect to a reactive (feedback) control strategy determining a reduction of the oscillations of the lift coefficient.

Biologically inspired dynamic material systems.

Numerous examples of material systems that dynamically interact with and adapt to the surrounding environment are found in nature, from hair-based mechanoreceptors in animals to self-shaping seed dispersal units in plants to remodeling bone in vertebrates. Inspired by such fascinating biological structures, a wide range of synthetic material systems have been created to replicate the design concepts of dynamic natural architectures. Examples of biological structures and their man-made counterparts are herein revisited to illustrate how dynamic and adaptive responses emerge from the intimate microscale combination of building blocks with intrinsic nanoscale properties. By using top-down photolithographic methods and bottom-up assembly approaches, biologically inspired dynamic material systems have been created 1) to sense liquid flow with hair-inspired microelectromechanical systems, 2) to autonomously change shape by utilizing plantlike heterogeneous architectures, 3) to homeostatically influence the surrounding environment through self-regulating adaptive surfaces, and 4) to spatially concentrate chemical species by using synthetic microcompartments. The ever-increasing complexity and remarkable functionalities of such synthetic systems offer an encouraging perspective to the rich set of dynamic and adaptive properties that can potentially be implemented in future man-made material systems.

Numerical simulations of odorant detection by biologically inspired sensor arrays

The antennules of many marine crustaceans enable them to rapidly locate sources of odorant in turbulent environmental flows and may provide biological inspiration for engineered plume sampling systems. A substantial gap in knowledge concerns how the physical interaction between a sensing device and the chemical filaments forming a turbulent plume affects odorant detection and filters the information content of the plume. We modeled biological arrays of chemosensory hairs as infinite arrays of odorant flux-detecting cylinders and simulated the fluid flow around and odorant flux into the hair-like sensors as they intercepted a single odorant filament. As array geometry and sampling kinematics were varied, we quantified distortion of the flux time series relative to the spatial shape of the original odorant filament as well as flux metrics that may be important to both organisms and engineered systems attempting to measure plume structure and/or identify chemical composition. The most important predictor of signal distortion is the ratio of sensor diameter to odorant filament width. Achieving high peak properties (e.g. sharpness) of the flux time series and maximizing the total number of odorant molecules detected appear to be mutually exclusive design goals. Sensor arrays inspired specifically by the spiny lobster Panulirus argus and mantis shrimp Gonodactylaceus falcatus introduce little signal distortion but these species' neural systems may not be able to resolve plume structure at the level of individual filaments via temporal properties of the odorant flux. Current chemical sensors are similarly constrained. Our results suggest either that the spatial distribution of flux across the aesthetasc array is utilized by P. argus and G. falcatus, or that such high spatiotemporal resolution is unnecessary for effective plume tracking.

Magnetic nanowires for acoustic sensors (invited)

Tiny hairlike sensors or cilia play a very important role in detection for many biological species, including humans. This research took inspiration from the packaging and transduction processes of the inner ear’s cochlea and cilia to design acoustic sensors. Specifically, this work uses nanowires of magnetostrictive materials as artificial cilia to sense acoustic signals. Anodic aluminum oxide (AAO) templates with hexagonal spacings were fabricated using a two-step anodization process as well as nanoimprint assisted self-assembly and were characterized using atomic force microscopy. Patterned microelectrodes were also fabricated at the backside of several templates using photolithography. Ni, Co, and Galfenol (Fe1−xGax0.1⩽x⩽0.25at.%) nanowires were fabricated using electrochemical deposition into nanoporous AAO templates where the pores had various geometries and some had large-area ordering as dictated by nanoimprinting. High aspect ratio nanowires with diameters varying from 10 to 200 nm and lengths up to 60μm were fabricated in arrays and were collectively and individually characterized using scanning electron microscopy. Galfenol thin films, fabricated electrochemically using a Hull cell, were characterized using x-ray diffraction and energy dispersive x-ray spectroscopy to determine the optimum current density for deposition. The magnetic response of millimeter-scale cantilevered beams to dynamic bending loads was also measured and compared to constitutive and free-energy models. A giant magnetoresistive sensor behind the beam measured the magnetic response of mechanical excitation applied to the tip of each rod and validated the models. Potenial applications of these nanowire cilia include sonar arrays, underwater cameras, and medical devices.