Fluorescent Guest Research Articles

Structural and antibacterial assessment of two distinct dihydroxy biphenyls encapsulated with β-cyclodextrin supramolecular complex

β-Cyclodextrin plays a vital role in biological application because it can enhance the stability and solubility of the guest molecules in the supramolecular inclusion complexes. Moreover, the β-Cyclodextrin inclusion complex has control-releasing behavior and lower toxicity than bare guest molecules. To improve the solubility and stability properties of two structurally different fluorescent guest molecules, namely 2,2′-dihydroxy biphenyl and 3,3′-dihydroxy biphenyls, they involve the β-Cyclodextrin inclusion complex process. Optical measurements clearly described the efficient binding through the changes in the absorbance and emission intensities of guest molecules in the presence of β-Cyclodextrin. The Job's plot from absorbance measurements reveals the 1:1 stochiometric ratio of binding of guests and the β-Cyclodextrin host. The FT-IR spectra of the solid complex show the characteristic stretching and bending vibrations from both the guests and the host molecule. The 1HNMR spectra of the inclusion complex promote downfield shifting of guest molecule protons upon binding with the β-Cyclodextrin host. The solid complex prepared using the solution method exhibits superior antibacterial activity against both gram-positive and gram-negative bacteria compared to the kneading and physical mixing methods.

Thermally activated delayed fluorescence hosts based on carbazole and quinazoline derivatives for red organic LEDs

Thermally activated delayed fluorescence (TADF) materials have been regarded as promising host materials for fluorescent and phosphorescent guest materials to achieve high performance organic light-emitting diodes (OLEDs). In this work, three molecules, PhCQ, m-PyCQ and p-PyCQ, using carbazole derivatives as donor and quinazoline units as acceptor were designed and synthesized. Both theoretical and experimental results showed that PhCQ, m-PyCQ and p-PyCQ possess TADF properties with higher triplet excited states than red phosphorescent guest, RD-1. When used as host materials for RD-1, it was found that the emission spectrum of PhCQ has the largest overlap with the absorption spectrum of RD-1, which is conducive to Förster resonance energy transfer (FRET) between the host to the guest. As a result, red phosphorescent OLED device based on PhCQ host exhibited the best performances with the maximum external quantum efficiency (EQE) of 37.2 %. When the brightness is 1000 cd/m2, the EQE is still as high as 33.0 %.

Single-Molecule Stoichiometry of Supramolecular Complexes.

The use of single-molecule microscopy is introduced as a method to quantify the photophysical properties of supramolecular complexes rapidly at ultra low concentrations (<1 nM), previously inaccessible. Using a model supramolecular system based on the host-guest complexation of cucurbit[n]uril (CB[n]) macrocycles together with a fluorescent guest (Ant910Me), we probe fluorescent CB[n] host-guest complexes in the single molecule regime. We show quantification and differentiation of host-guest photophysics and stoichiometries, both in aqueous media and noninvasively in hydrogel, by thresholding detected photons. This methodology has wide reaching implications in aiding the design of next-generation materials with programmed and controlled properties.

Bidirectional photomagnetism, exciplex fluorescence and dielectric anomalies in a spin crossover Hofmann-type coordination polymer.

Stepped spin crossover (SCO) complexes with three or more spin states have promising applications in high-order data storage, multi-switches and multi-sensors. Further synergy with other functionalities, such as luminescence and dielectric properties, will provide a good chance to develop novel multifunctional SCO materials. Here, a bent pillar ligand and luminescent pyrene guest are integrated into a three-dimensional (3D) Hofmann-type metal-organic framework (MOF) [Fe(dpoda){Au(CN)2}2]·pyrene (dpoda = 2,5-di-(pyridyl)-1,3,4-oxadiazole). The magnetic data show an incomplete and two-step SCO behavior with the sequence of 1 ↔ 1/2 ↔ 1/4. The rare bi-directional light-induced excited spin-state trapping (LIESST) effect and light-induced stepped thermal relaxation after LIESST are observed. The pyrene guests interact with dpoda ligands via offset face-to-face π⋯π interactions to form intermolecular exciplex emissions. The competition between thermal quenching and stepped SCO properties results in a complicated and stepped exciplex fluorescence. Moreover, the stepped dielectric property with higher dielectric permittivity at lower temperature may be related to the more frustrated octahedral distortion parameters in the intermediate spin states. Hence, a 3D Hofmann-type MOF with bent pillar ligands and fluorescent guests illustrates an effective way for the development of multifunctional switching materials.

A triazolium-based fluorophore intercalated in layered double hydroxides: from simple syntheses to bright solid-state luminescence.

This study presents the intercalation into Layered Double Hydroxides (LDHs) of two sulfonated organic molecules featuring the mesoionic triazolium scaffold. These sulfonated fluorophores exhibited excellent solubility in aqueous basic solutions, facilitating their compatibility with the synthesis of LDHs through coprecipitation methods. We applied the size-matching interlayer space (SMIS) approach by substituting a portion of a mono- or dianionic surfactant used in LDH preparation by the sulfonated fluorophore, we aimed to match the size of the luminescent interleaved guest effectively. Our investigation focused on two anion spacers: the classic monoanionic dodecyl sulfate (DS) and the dianionic phenylene dipropionate (PPA). Our results indicated that the latter spacer allowed a more efficient insertion of the fluorescent guest. Thermal resistance analysis underscored the robustness of the final hybrid materials, suggesting a promising design strategy for luminescent materials when applied in diverse applications.

High-Efficiency Area-Emissive White Organic Light-Emitting Transistor for Full-Color Display.

The construction of high-performance white organic light-emitting transistor (OLET) with uniform area emission is crucial for smart display technologies but remains greatly challenging. Herein, high-efficiency uniform area-emissive OLETs based on a unique lateral-integrated device configuration which incorporates efficient energy transfer of phosphorescent and fluorescent guests, enabling color-tunable and white emission, are demonstrated. Through precisely regulating the energy transfer between host and guests, high external quantum efficiency of 13.9% for white-emission OLETs is achieved due to the improved high exciton utilization and light outcoupling efficiency which is the highest value reported so far for OLETs and prevents exciton-charge annihilation and electrode photon losses. Moreover, good loop stability is also achieved, along with effective gate tunability and ultralow driving voltage of below 5V. Finally, a 4 × 6 white-emission OLET array for full-color display is demonstrated for the first time, suggesting its great potential applications for advanced display technologies.

Specific Recognition and Adsorption of Volatile Organic Compounds by Using MIL-125-Based Porous Fluorescence Probe Material.

The severity of the volatile organic compounds (VOCs) issue calls for effective detection and management of VOC materials. Metal-organic frameworks (MOFs) are organic-inorganic hybrid crystals with promising prospects in luminescent sensing for VOC detection and identification. However, MOFs have limitations, including weak response signals and poor sensitivity towards VOCs, limiting their application to specific types of VOC gases. To address the issue of limited recognition and single luminosity for specific VOCs, we have introduced fluorescent guest molecules into MOFs as reference emission centers to enhance sensitivity. This composite material combines the gas adsorption ability of MOFs to effectively adsorb VOCs. We utilized (MIL-125/NH2-MIL-125) as the parent material for adsorbing fluorescent molecules and selected suitable solid fluorescent probes (FGFL-B1) through fluorescence enhancement using thioflavin T and MIL-125. FGFL-B1 exhibited a heightened fluorescence response to various VOCs through charge transfer between fluorescent guest molecules and ligands. The fluorescence enhancement effect of FGFL-B1 on tetrahydrofuran (THF) was particularly pronounced, accompanied by a color change from yellow to yellowish green in the presence of CCl4. FGFL-B1 demonstrated excellent adsorption properties for THF and CCl4, with saturated adsorption capacities of 655.4 mg g-1 and 811.2 mg g-1, respectively. Furthermore, FGFL-B1 displayed strong luminescence stability and reusability, making it an excellent sensing candidate. This study addresses the limitations of MOFs in VOC detection, opening avenues for industrial and environmental applications.

Convenient cucurbit[8]uril-based supramolecular fluorescent probe for efficient detection of phenolic contaminants

The serious environmental pollution problem has been one of the topics of concern as people become more aware of environmental protection. Phenolic compounds, which are widely used in various industries, have become one of the important water pollutants, causing great harm to humans, animals and plants, and it is crucial to develop a convenient and rapid method for the detection of trace phenolic contaminants. Among the many methods for detecting phenolic pollutants, fluorescent probes stand out for their high sensitivity, rapidity and efficiency. In this paper, a water-soluble fluorescent guest molecule (DPA) was successfully synthesized and self-assembled with cucurbit[8]uril (Q[8]) by host-guest interaction for the detection of phenolic contaminants, which can effectively distinguish 20 common phenolic contaminants, and more interestingly, the addition of 2,4,6-trinitrophenol not only effectively quenched the fluorescence, but also formed a ternary complex to settle down from the aqueous solution. This effective supramolecular fluorescence probe provides a new method for the rapid identification of phenolic contaminants in water.

Thioflavin-T-Incorporated Cerium-ATP Coordination Polymer Nanoparticles: A Promising System for Detection of Uranyl Ion (UO22+) in Aqueous Medium.

Lanthanide-based coordination polymer nanoparticles (Ln-CPNs) are studied for analytical and biomedical sensing, mainly utilizing the luminescent properties of lanthanides. However, the inclusion of fluorescent guest molecules within the nanoparticles can lead to a stimuli-responsive system with modulated photo-physical properties that can be useful for detecting analytes. In this work, we have synthesized cerium(III) coordination polymer nanoparticles using adenosine triphosphate (ATP) molecules as the ligands. The porous polymeric structure enables CPNs for reversible inclusion and release of thioflavin-T (ThT), which is a weakly emissive dye in the free state but becomes highly emissive when incorporated into the Ce-ATP CPNs. Modulation of the photo-physical properties of ThT-incorporated CPNs in response to the radiotoxic and environmentally alarming uranyl ion (UO22+) has been used for its detection in aqueous medium in the range of 0-20 μM by fluorimetry with an LOD of 80 ng mL-1 (0.34 μM) in deionized water without interference from the most commonly occurring metal ions. Furthermore, the sensing platform has been successfully utilized for UO22+ determination in seawater sample without any pre-treatment and adjustment of pH.

Enhanced Luminescence of Dye-Decorated ZIF-8 Composite Films via Controllable D-A Interactions for White Light Emission.

Metal-organic frameworks (MOFs) constructed by metal ions/clusters and organic linkers are used to encapsulate fluorescent guest species with aggregation-caused quenching (ACQ) effects to enhance fluorescence properties due to their porous structures and high specific surface areas. However, there would be a problem of matching between MOF pores and guest molecules' sizes. In this paper, amorphous ZIF-8 was modified by carboxyl functional groups (H3BTC-ZIF-8) via introducing the 1,2,4-benzenetricarbonic acid (H3BTC) ligand into the ZIF-8 sol system. Moreover, H3BTC-ZIF-8 was used for the loading of organic fluorescent dyes rhodamine 6G (R6G) and coumarin 151 (C151) to prepare R6G/C151/H3BTC-ZIF-8 composite films. A white-light-emitting composite film (R6G/C151/H3BTC-ZIF-8) with CIE coordinates of (0.323, 0.347) was successfully prepared by compounding fluorescent dyes (R6G and C151) with H3BTC-modified ZIF-8, whose photoluminescence quantum yield (PLQY) can reach 64.0%. It was higher than the PLQY of the composite films prepared by crystalline ZIF-8 (40.2%) or amorphous ZIF-8 without H3BTC (48.0%) compounded with the same concentrations of dyes. The fluorescence enhancement was probably attributed to an increased amount of active sites of H3BTC-modified ZIF-8 interacting with dyes C151 and R6G. This can form hydrogen bonds between H3BTC-ZIF-8 and C151, and weak electron donor-acceptor (D-A) interactions between H3BTC-ZIF-8 and R6G molecules, respectively, thus enhancing the interactions between dyes and ZIF-8 and reducing the ACQ effect existing between dye molecules. Therefore, this strategy could provide an important guidance to develop white-light-emissive materials.

Cucurbit[n]uril-based fluorescent indicator-displacement assays for sensing organic compounds.

The widespread conversion of synthetic receptors into luminescent sensors has been achieved via the use of fluorescent-indicator displacement assays (F-IDAs). Due to their rigid structures and efficient binding affinities, cucurbit[n]urils, combined with a variety of fluorescent guests, have gained extensive utilization in fluorescent-indicator displacement assays for sensing non-fluorescent or weakly fluorescent organic compounds (analytes) in a selective and specific manner. This mini-review summarizes recent advances in the design of cucurbit[n]uril-based fluorescent-indicator displacement assays and discusses the current challenges and future prospects in this area.

Label-free tumor cell screening based on IDO1-mediated tryptophan metabolism at single cell level

Indoleamine 2,3-dioxygenase 1 (IDO1) plays a critical role in inflammatory and immunometabolism programming through catalyzing the oxidation of tryptophan (Trp) into downstream N-formylkynurenine. IDO1 is typically up-regulated in malignant tumors, making it a potential biomarker for cancer diagnosis. Here we show an effective strategy for tumor cell detection by integrating IDO1 activity assay with single cell-encapsulated droplets on a microfluidic platform for high-throughput bioanalysis. Mixed cells, as well as other cofactors, are encapsulated in individual droplets, which act as dynamic microreactors for IDO1-catalyzed oxidation of Trp. After pico-injection of a biosensing ensemble consisting of the macrocycle cucurbit [8]uril (Q8) and a fluorescent guest, rapid and robust screening of tumor cells by fluorescence signal is achieved in a few minutes reporting to Trp depletion, expanding the scope of conventional antibody-based detection of protein biomarkers. The results represent the first example of quantifying IDO1 enzymatic activity at the single cell level with a high-throughput performance, therefore promising warning signs and early diagnosis of tumor cells.

Highly Emissive Luminogens in Both Solution and Aggregate States

Highly Emissive Luminogens in Both Solution and Aggregate States

Sensing Base Modifications in Non-Canonically Folded DNA with an Optimized Host:Guest Sensing Array.

An arrayed host:guest fluorescence sensor system can discriminate DNA G-quadruplex structures that differ only in the presence of single oxidation or methylation modification in the guanine base. These small modifications make subtle changes to G4 folding that are often not detectable by CD but induce differential fluorescence responses in the array. The sensing is functional in diluted serum and is capable of distinguishing individual modifications in DNA mixtures, providing a powerful method of detecting folding changes caused by DNA damage.

Contrastive manipulations on vertical stratifications by a fluorescent guest component in ternary nonfullerene and fullerene organic solar cells

Herein, a simple fluorescent material TPA2O (5,5′-((4′-(diphenylamino)-[1,1′-biphenyl]-2,6-diyl)bis(methaneylylidene))bis(1,3-dimethylpyrimidine-2,4,6(1H,3H,5H)-trione)) is designed and successively introduced into both polymer:nonfullerene and polymer:fullerene blends to construct ternary organic solar cells with an inverted structure of ITO/ZnO/active layer/MoO3/Ag. Remarkably improved power conversion efficiency by up to 25% (from 9.21% to 11.47%) and sufficiently enhanced photocurrent (from 21.01 to 25.25 mA cm−2) are realized in nonfullerene ternary devices by incorporating a small amount of TPA2O, while reduced PCE is found in ternary fullerene systems. Characterizations have proven that efficient Förster resonance energy transfer (FRET) exists between TPA2O and the host PTB7-Th donor. And the distinguishable device performance in different ternary systems is determined by the contrastive influences on lateral and longitudinal direction morphologies. Specifically, by incorporating TPA2O, the cross-section morphology is degenerated in ternary fullerene blends but stable in ternary nonfullerene blends. More interestingly, for vertical-section morphology, PTB7-Th is more enriched in the upper layers in ternary nonfullerene blends, which is close to hole-transport MoO3 and inducing more efficient hole transport. Whereas PTB7-Th is less concentrated within the top layers in ternary PC71BM-based blends. Moreover, remarkably enhanced thermal stability is observed in TPA2O-based nonfullerene devices, with 94% of the initial PCE after baking at 80 °C for 144 h, compared to 75% and 62% of IEICO-4F and PC71BM binary devices, respectively.

High-PLQY and Efficient Upconverted Fluorescence of the TAPC/PBD Exciplex with Fluorescent Guests

High-PLQY and Efficient Upconverted Fluorescence of the TAPC/PBD Exciplex with Fluorescent Guests

Nanoporous-crystalline and amorphous films of PPO including off-on vapochromic fluorescent 7-hydroxy coumarin guests

This study examines the preparation of nanoporous-crystalline and amorphous films of poly(2,6-dimethyl-1,4-phenylene)oxide (PPO) containing 7-hydroxy coumarin (i.e., umbelliferone) for the detection of chloroform vapours. Chloroform is selected as the volatile contaminant model being considered harmful and possibly carcinogenic after prolonged exposure. Umbelliferone is chosen as a fluorescent molecule being mostly unemissive in the solid-state and apolar media. α and β nanoporous-crystalline and amorphous PPO films presenting ≈40 μm thickness have been prepared by casting from carbon tetrachloride, benzene and chloroform solutions, respectively, whereas umbelliferone inclusions (1–2 wt%) have been realized in saturated methanol mixtures. Films show fluorescence maximum at about 430 nm with very low quantum yield (Φ F ) of around 1–2%, and particularly reduced in the α and β PPO films, thus suggesting stronger molecular interactions which might facilitate fluorescence self-quenching. It has demonstrated that the exposure to chloroform vapours under saturated conditions (10 5 ppm) turns rapidly on the fluorescence of the polymer films thanks to the solvation effect of the solvent and in agreement with the Φ F of 7% of umbelliferone in chloroform. Notably, a slower response was detected by using dichlorometane as VOC, possibly due to the weaker H-donor strength with respect to chloroform. It was worth noting, that the phenomenon results fastest for the α PPO films, i.e., in case of the lowest Φ F and quenched emission. Vapochromism appears therefore sensitive to the different fluorophore confinement, and the reported results may open new avenues for the rapid detection of VOC vapours. • Nanoporous-crystalline PPO films were prepared and characterized by WAXD and FTIR. • Umbelliferone inclusions in PPO films showed very low Φ F of around 1–2%. • Exposure to CHCl 3 vapours turned the fluorescence on. • Faster vapochromism for the α and β co-crystalline PPO films.

Confinement of Luminescent Guests in Metal-Organic Frameworks: Understanding Pathways from Synthesis and Multimodal Characterization to Potential Applications of LG@MOF Systems.

This review gives an authoritative, critical, and accessible overview of an emergent class of fluorescent materials termed “LG@MOF”, engineered from the nanoscale confinement of luminescent guests (LG) in a metal–organic framework (MOF) host, realizing a myriad of unconventional materials with fascinating photophysical and photochemical properties. We begin by summarizing the synthetic methodologies and design guidelines for representative LG@MOF systems, where the major types of fluorescent guest encompass organic dyes, metal ions, metal complexes, metal nanoclusters, quantum dots, and hybrid perovskites. Subsequently, we discuss the methods for characterizing the resultant guest–host structures, guest loading, photophysical properties, and review local-scale techniques recently employed to elucidate guest positions. A special emphasis is paid to the pros and cons of the various methods in the context of LG@MOF. In the following section, we provide a brief tutorial on the basic guest–host phenomena, focusing on the excited state events and nanoscale confinement effects underpinning the exceptional behavior of LG@MOF systems. The review finally culminates in the most striking applications of LG@MOF materials, particularly the “turn-on” type fluorochromic chemo- and mechano-sensors, noninvasive thermometry and optical pH sensors, electroluminescence, and innovative security devices. This review offers a comprehensive coverage of general interest to the multidisciplinary materials community to stimulate frontier research in the vibrant sector of light-emitting MOF composite systems.

Supramolecular Assembly of His-Tagged Fluorescent Protein Guests within Coiled-Coil Peptide Crystal Hosts: Three-Dimensional Ordering and Protein Thermal Stability.

The use of biomaterials for the inclusion and stabilization of biopolymers is an ongoing challenge. Herein, we disclose three-dimensional (3D) coiled-coil peptide crystals with metal ions that include and overgrow His-tagged fluorescent proteins within the crystal. The protein guests are found within two symmetry-related growth sectors of the crystalline host that are associated with faces of the growing crystal that display ligands for metal ions. The fluorescent proteins are included within this "hourglass" region of the crystals at a notably high level, display order within the crystal hosts, and demonstrate sufficiently tight packing to enable energy transfer between a donor-acceptor pair. His-tagged fluorescent proteins display remarkable thermal stability to denaturation over extended periods of time (days) at high temperatures when within the crystals. Ultimately, this strategy may prove useful for the prolonged storage of thermally sensitive biopolymer guests within a 3D crystalline matrix.

Tuning the affinity of amphiphilic guest molecules in a supramolecular polymer transient network.

Dynamicity plays a central role in biological systems such as in the cellular microenvironment. Here, the affinity and dynamics of different guest molecules in a transient supramolecular polymer hydrogel system, i.e. the host network, are investigated. The hydrogel system consists of bifunctional ureido-pyrimidinone (UPy) poly(ethylene glycol) polymers. A monofunctional complementary UPy guest is introduced, designed to interact with the host network based on UPy–UPy interactions. Furthermore, two other guest molecules are synthesized, being cholesterol and dodecyl (c12) guests; both designed to interact with the host network via hydrophobic interactions. At the nanoscale in solution, differences in morphology of the guest molecules were observed. The UPy–guest molecule formed fibers, and the cholesterol and c12 guests formed aggregates. Furthermore, cellular internalization of fluorescent guest molecules was studied. No cellular uptake of the UPy–cy5 guest was observed, whereas the cholesterol–cy5 guest showed membrane binding and cellular uptake. Also the c12–cy5 guest showed cellular uptake. Formulation of the guest molecules into the UPy hydrogel system was done to study the guest–host affinity. No changes in mechanical properties as measured with rheology were found upon guest–hydrogel formulation. Fluorescence recovery after photobleaching showed the diffusive properties of the cy5-functionalized guests throughout the host network. The c12 guest displayed a relatively fast mobility, the UPy guest displayed a decrease in mobility, and the cholesterol–guest remained relatively stable in the host network with little mobility. This demonstrates the tunable dynamic differences of affinity-based interaction between guest molecules and the host network. Interestingly, the cholesterol guest is internalized in cells and is robustly incorporated in the hydrogel network, while the UPy guest is not taken up by cells but shows an affinity to the hydrogel network. These results show the importance of guest–hydrogel affinity for future drug release. However, if modified with cholesterol these guests, or future drugs, will be taken up by cells; if modified with a UPy unit this does not occur. In this way both the drug–hydrogel interaction and the cell internalization behavior can be tuned. Regulating the host–guest dynamics in transient hydrogels opens the door to various drug delivery purposes and tissue engineering.