Graphene Oxide Nanocomposites Research Articles

Polyaniline/reduced graphene oxide nanocomposites for electrochemical and solar cell applications

Polyaniline nanocomposites are synthesized via in situ chemical oxidation method by reinforcing reduced graphene oxide nanoparticles of various weight percentage. Structural, optical, thermal and electrochemical studies are performed to know the significance of introducing reduced graphene oxide into polyaniline and to analyse the importance of filler weight percentage in determining various properties of the nanocomposites. X-ray diffraction peak intensity is appeared to be maximum for nanocomposite doped with 2% filler. This composite shows minimum crystallite size and maximum photoluminescence intensity. Maximum ID/IG ratio obtained for 2% filler added nanocomposite from Raman spectroscopy studies proved that the presence of more surface defects and recombination of charge carriers are the reasons for enhanced photoluminescence. Thermal stability is found to be better for a nanocomposite with 1% reduced graphene oxide and obtained a mass retention of 60% even after heating up-to 600 °C. SEM images give various shapes of nanocomposite such as nanorods, spherical nanoparticles and button shaped nanocomposites for different filler weight percentage. Carbon to oxygen ratio is observed to be decreased as the filler percentage increased from 1% to 4% in SEM-EDAX analysis. Polymer nanocomposite with 1% reinforcement possess maximum UV and visible absorption and is found to be decreased as filler concentration increased from 1 to 4%. Electrochemical analysis is performed for polyaniline and 1% reduced graphene oxide reinforced polyaniline nanocomposite. Specific capacitance of the electrode is obtained as 212 F g−1 and 609 F/g for polyaniline and nanocomposite respectively at a scan rate of 0.01 V/S. Solar cell device performance study shows that power conversion efficiency is 5.54% for 1% reduced graphene oxide nanocomposite, 4.7% for 2% reinforced, 4.16% for 3% filler and 3.61% for 4% nanocomposite.

Effects of Heteroatom Doping on the Electrochemical Hydrogen Uptake and Release of Pd-Decorated Reduced Graphene Oxide.

Heteroatom doping has been widely recognized as a key strategy for improving the electrochemical properties of graphene-based materials for hydrogen storage. However, a precise understanding of how heteroatom doping influences catalytic performance, specifically regarding the intricate effects of doping-induced electron redistribution, has been lacking. Here, we report on a comprehensive exploration of the electrochemical performance enhancement in Pd-decorated reduced graphene oxide (rGO) nanocomposites through fluorine (F) or nitrogen (N) doping. Various analytical techniques such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX) spectroscopy, Raman spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), X-ray absorption near edge structure (XANES), and extended X-ray absorption fine structure (EXAFS) were employed to thoroughly characterize the synthesized nanocomposites. The findings revealed that either F or N doping effectively addressed clustering issues of Pd nanoparticles formed on the rGO surface, resulting in improved homogeneity of Pd distribution. Electrochemical studies provided crucial insights into hydrogen adsorption-desorption behaviors. The heteroatom doped nanocomposites, Pd/N-rGO and Pd/F-rGO, exhibited superior electrochemical performance, which can be attributed to the increase of the active sites due to the N-/F-doping, respectively. The hydrogen discharge capacities of Pd/N-rGO (80.9 mAh g-1) and Pd/F-rGO (25.0 mAh g-1) nanocomposites were determined to be over 4.0 and 1.2 times higher than that of the Pd/rGO (20.1 mAh g-1), respectively. The distinctive electrochemical performances observed between the two types of heteroatom-containing nanocomposites highlight the subtle structural modifications of Pd nanoparticles as the key factor influencing performance. This research contributes essential knowledge to the evolving field of hydrogen storage materials, emphasizing the promising potential of heteroatom-doped Pd-decorated rGO nanocomposites for advancing clean and sustainable energy solutions.

Disposable Zirconium trisulfide-Reduced graphene oxide modified conducting thread based electrochemical biosensor for lung cancer diagnosis

Flexible technology in sensors have received much attention in monitoring of human health through various physiological indicators. Thus, it drawn a lot of interest in the development of flexible substrate for the diagnosis of various diseases via analysis of analytes. Present work focusses on the development of ecofriendly, portable, flexible, conducting thread (Th) and used as smart substrate for fabrication of biosensor towards ultrasensitive detection of the lung cancer biomarker (cytoskeleton-associated protein 4; CKAP4). The zirconium trisulfide-reduced graphene oxide nanocomposite and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) modified cotton thread based biosensor was fabricated via dip coating method. Next, successive immobilization of monoclonal antibodies of CKAP4 (anti-CKAP4) and bovine serum albumin (BSA) was performed via drop cast approach using fabricated electrode [nZrS3@rGO/PEDOT:PSS/Th]. The response of fabricated electrode (BSA/anti-CKAP4/ZrS3@rGO/PEDOT:PSS/Th) was recorded electrochemically versus CKAP4 concentration via chronoamperometry (CA). The results showed wider linear detection range of 6.25-800 pg mL−1, excellent sensitivity of 85.2 µA[log(pg mL−1)]-1cm−2 with good stability up to 42 days. The response of fabricated biosensor was supported by investigating response of CKAP4 biomarker present in patients of lung cancer (concentration as determined through enzyme-linked immunosorbent assay) and obtained results exhibited excellent correlation with that of standard samples.

Highly Efficient Electrospun Silver Decorated Graphene Oxide Nanocomposites on Poly(vinylidene fluoride) (PVDF@GO-Ag) Hybrid Membrane for Reduction of 4-Nitrophenol.

Graphene oxide-silver poly(vinylidene fluoride) membranes (PVDF@GO-Ag) were successfully synthesized by the electrospinning method, which exhibited a high catalytic activity using the hydrogenation of 4-nitrophenol (4-NP) as a model reaction in a batch reaction study. The hybrid membranes doped with 1 wt% GO and 2 wt% Ag (PVDF-1-2) exhibited the most desired performance for the catalytic reduction of 4-NP. Importantly, PVDF-1-2 exhibited excellent cycling stability in 10 catalytic cycle tests and was highly amenable to separation. This property effectively addresses the significant challenges associated with the practical application of nanocatalysts. Furthermore, density-functional theory (DFT) calculations have demonstrated that the GO-Ag nanocomposites exhibit the strongest adsorption capacity for 4-NP- when a specific ratio of GO and Ag is achieved, accompanied by the loading of Ag nanoclusters onto GO. Additionally, the study demonstrated that an increase in temperature significantly accelerated the reaction rate, in line with the van't Hoff rule. This study provides an effective and environmentally friendly solution for the treatment of 4-NP in wastewater.

Sodium alginate/banana peels/reduced graphene oxide nanocomposite beads for effective removal of copper and nickel from aqueous solutions

The use of naturally derived nanocomposite beads to remove nickel and copper is gaining more attention due to its relative abundance, low toxicity, and strong affinity toward heavy metals. Most previous studies focus on removing single heavy metals using developed nanocomposite beads. This work prepared sodium alginate/banana peels/reduced graphene oxide nanocomposite beads through simple precipitation using banana peels, reduced graphene oxide, and sodium alginate. The formed nanocomposite beads were characterized and evaluated for the adsorption of nickel and copper from the aqueous phase at neutral pH. The Langmuir isotherm suggests the homogenous adsorption of metals on the surface of the bead. The maximum removal capacity is 85.32 mg/g and 95.79 mg/g for nickel and copper, respectively. This study provides new insight into utilizing banana peels, reduced graphene oxide, and sodium alginate for toxic metal remediation to overcome pollution problems.

Microwave-assisted synthesis of perovskite hydroxide-derived Co3O4/SnO2/reduced graphene oxide nanocomposites for advanced hybrid supercapacitor devices

The current article reports a facile, ultrafast, and cost-effective, solid-state microwave (MW) synthetic route for the conversion of perovskite hydroxide (CoSn(OH)6) to crystalline metal oxides (Co3O4 and SnO2) with the help of reduced graphene oxide (rGO) nanosheets. In a domestic MW oven, the Co3O4/SnO2/rGO (CSO-rGO) nanocomposite was synthesized within a quick reaction time of only 30 s. The study deeply focused on analyzing the surface morphology, metal oxide attachment on the surfaces of rGO nanosheets, the specific surface area, and the electrochemical performance of supercapacitor devices from the CSO-rGO nanocomposite. As a positive electrode for supercapacitors, the synthesized hybrid electrode displayed a good capacity (146.4C/g) and enhanced cycling stability (103.2 % after 15,000 cycles). Moreover, the corresponding aqueous hybrid supercapacitor device with MW-synthesized rGO as a negative electrode displayed a maximum energy density of 27 Wh/kg and promising cycling stability of 102.4 % after 10,000 cycles. As a whole, compared to the common time-consuming synthetic approaches, the MW-assisted synthetic approach is highly beneficial in terms of short reaction time, cost-effectiveness, and straightforwardness. The MW synthesis methodology employed in this study can be utilized for analogous composite electrodes that incorporate other layered conductive architectures in addition to metal oxides.

Optimized Nb‐Doped TiO2/rGO Nanocomposites for Assessment of Photovoltaic Performance With Metal‐Free Dye and Polymer Gel Electrolyte

AbstractThis research presents the development of niobium (Nb)‐doped titania (TiO2)/reduced graphene oxide (rGO) nanocomposites (NTR NCs) for dye‐sensitized solar cells (DSSCs). The novelty lies in two aspects: introducing Nb (V) ions into TiO2/rGO nanocomposites via an in‐situ sol‐gel method with doping concentrations from 1.0 to 3.0 mol %, and fabricating photoanodes using the doctor blade technique, sensitized with a Co2+/Co3+‐based PEO‐PEG polymer gel electrolyte‐assisted D‐π‐A carbazole metal‐free (SK3) dye. Detailed investigations into the optoelectrical, structural, and morphological properties were conducted using various spectral and analytical tools. Notably, DSSCs based on Nb‐doped TiO2/rGO nanocomposites with 2.0 mol % Nb (NTR‐2) achieved a remarkable solar efficiency (η) of 5.48 % under AM 1.5 solar simulation, significantly outperforming devices based on bare TiO2 nanoparticles and undoped TiO2/rGO NCs by factors of 4.15 and 2.97, respectively. The substantial enhancement in photovoltaic performance is attributed to superior charge transfer properties and higher carrier density, as revealed by electrochemical impedance spectroscopy (EIS) and Mott‐Schottky (M–S) analysis. Nb‐doping results in an energetic surface nature, improved optical absorption, and reduced charge transfer resistance, collectively boosting the overall efficiency of DSSCs. This work underscores the potential of Nb‐doped TiO2/rGO NCs as effective photoanode materials in enhancing DSSC performance.

Utilization of copper chromite-reduced graphene oxide nanocomposite for the wastewater remediation and effective supercapacitive performance

This article has detailed the growth of virgin copper chromite nanoparticles (CuCr2O4 NPs) and reduced graphene oxide sheet (rGO)-based CuCr2O4 nanocomposite through the process of reflux condensation method and calcination process. When exposed to visible light, these two synthesized nanomaterials exhibit enhanced photocatalytic activity which helps in the degradation of organic dyes such as methylene blue. Numerous characterization methods, including FTIR, UV–visible analysis, and XRD, verify the creation of these nanomaterials. The CuCr2O4-rGO nanocomposite's semiconductor nature is confirmed by the band gap analysis using Tauc's formula. The CuCr2O4 NPs grown on the rGO surface have a dimension of 6 nm, according to the TEM study and particle distribution graph. To find the reason for the enhanced photo-activity, we have proposed a photocatalytic mechanism which is supported by photoluminescence result. Recyclability in five more cycles is used to measure the stability of the nanocomposite, and it is found that photocatalytic efficiency does not significantly decline up to five cycles. When exploring the CuCr2O4-rGO nanocomposite as a material for supercapacitor electrodes, it showcased a remarkable specific capacity of 681.43 F/g at 0.5 A g−1. Moreover, the CuCr2O4-rGO nanocomposite electrode displayed a long-term life cycle, retaining 93.8 % of its initial capacity after 1200 cycles, paired with a commendable Coulombic efficiency of 95.31 % and outstanding power and energy density of 1504 W/kg and 23.66 Wh/kg respectively.

In2O3 electrochemical transistors based on PtAu4/RGO nanocomposites functionalized gate for highly sensitive nitrite detection

Nitrite is commonly found in the environment, but its overuse and potential toxicity pose serious health risks. There is a strong need to develop robust and reliable methods for detecting nitrite. Herein, a novel In2O3 solution-gated electrochemical transistor (SGET) nitrite sensor was designed and fabricated for highly sensitive detection of nitrite. Different thicknesses of In2O3 thin films were prepared by sol–gel method, which were used as the channel of transistors and optimized through evaluating the electronic and electrochemical properties. To improve the catalytic oxidation of nitrite, PtAu4 nanoparticles modified reduced graphene oxide nanocomposites (PtAu4/RGO) were fabricated on the gate of transistors through electrodeposition approach. The developed sensor exhibited exceptional sensing performance in nitrite detection, which featured with low detection limit (0.1 nM nitrite) and ultra-wide linear range from 0.1 nM to 1 mM. The developed In2O3 SGET sensor displayed excellent stability and high resistance to common interfering ions, thereby demonstrating superior anti-interference performance. Nitrite in real samples of natural lake water has been accurately measured, suggesting that the designed sensor could act as an ideal transducer platform for highly sensitive and selective nitrite detection in food and environmental fields.

Palladium–reduced graphene oxide nanocomposites enhance neurite outgrowth and protect neurons from Ishemic stroke

Currently, the construction of novel biomimetic reduced graphene oxide (RGO)-based nanocomposites to induce neurite sprouting and repair the injured neurons represents a promising strategy in promoting neuronal development or treatment of cerebral anoxia or ischemia. Here, we present an effective method for constructing palladium-reduced graphene oxide (Pd-RGO) nanocomposites by covalently bonding Pd onto RGO surfaces to enhance neurite sprouting of cultured neurons. As described, the Pd-RGO nanocomposites exhibit the required physicochemical features for better biocompatibility without impacting cell viability. Primary neurons cultured on Pd-RGO nanocomposites had significantly increased number and length of neuronal processes, including both axons and dendrites, compared with the control. Western blotting showed that Pd-RGO nanocomposites improved the expression levels of growth associate protein-43 (GAP-43), as well as β-III tubulin, Tau-1, microtubule-associated protein-2 (MAP2), four proteins that are involved in regulating neurite sprouting and outgrowth. Importantly, Pd-RGO significantly promoted neurite length and complexity under oxygen-glucose deprivation/re-oxygenation (OGD/R) conditions, an in vitro cellular model of ischemic brain damage, that closely relates to neuronal GAP-43 expression. Furthermore, using the middle cerebral artery occlusion (MCAO) model in rats, we found Pd-RGO effectively reduced the infarct area, decreased neuronal apoptosis in the brain, and improved the rats’ behavioral outcomes after MCAO. Together, these results indicate the great potential of Pd-RGO nanocomposites as a novel excellent biomimetic material for neural interfacing that shed light on its applications in brain injuries.

Synergistically enhanced photocatalytic properties of Co3O4-G/GO nanocomposites: unravelling their interactions and charge-transfer dynamics using XAS.

Metal oxide composites with graphene/graphene oxide have increasingly gained popularity in enhancing the photocatalytic degradation of several existing harmful dyes. Moreover, identifying the role of carbon networks and their interactions in composite formation would assist in the design and development of photocatalysts. In the present study, we investigated the role of carbon networks in improving photocatalytic properties. Electronic structure analysis of cobalt oxide-graphene (C2)/graphene oxide (C3) nanocomposites using XAS suggested possible charge transfer from cobalt oxide nanoparticles to the carbon network during composite formation. The photocatalytic degradation of C3 towards phenol dye (1×10-3M) was >50% and improved the degradation rate with k = 0.231 h-1.In the quest to understand the mechanism unfolding on its surface, in situ XAS under UV-visible irradiation was performed, which shed light on delayed excitonic recombination in the synthesized nanocomposites. This enabled hydroxy radicals (˙OH) to play a preeminent role in the cleavage of the phenol ring and its intermediaries. Based on these observations, a detailed mechanism for charge transfer occurring during nanocomposite formation and the mechanism involved in the enhanced photocatalytic activity of the nanocomposite photocatalyst towards phenol degradation under the influence of UV-visible irradiation are discussed.

Nickel foam-decorated hollow-Co3O4/GO nanocomposites: A highly sensitive non-enzymatic electrochemical sensor for glucose detection

Cobalt-based nanomaterials, characterized by multiple oxidation states and high stability in alkaline environments, have been found extensive applications in glucose detection. In this study, a cobalt-based zeolitic imidazolate framework (ZIF-67) was employed as a precursor, where Co2+ was coordinated with carboxyl groups of oxidized graphene oxide (GO), resulting in the formation of cobalt-based nanoparticles. The integration of Co2+ with GO established a novel cobalt-based nanomaterial with potential implications for glucose detection. At a calcination temperature of 260 °C, the calcination process extended for 4 h, fulfilling the synthesis of Hollow-Co3O4/GO nanocomposites. These nanocomposites were subsequently engaged as electrochemical electrodes for glucose detection through the impregnation method. The distinctive structure of Hollow-Co3O4/GO has spurred mutual promotion of the reoxidation reactions at the interface, culminating in a substantial augmentation of the specific surface area and a consequent considerable surge in the glucose oxidation current. In addition, due to the retention of the structure of MOFs, the pores can be used to adsorb glucose molecules, which is conducive to the accurate detection of the reaction. Under optimal conditions, the sensitivity of the Hollow-Co3O4/GO modified electrode hits 1582.7 μA mmol−1 cm−2, with a detection limit of 0.49 μmol/L (S/N = 3) and a response time of approximately 2 s. These achievements have emphasized the promising applicability of Hollow-Co3O4/GO nanocomposites as an active material for practical electrochemical biosensors.

Study of dielectric properties of polymer/air plasma treated graphene oxide nanocomposites for electronic applications

In the present study we emphasized on the dielectric properties of Ethylene Vinyl Acetate (EVA) filled with untreated and plasma-treated graphene oxide (GO). The chemical fingerprints of EVA/GO were analysed using FTIR. Decreased ID/IG ratio from 2.99 to 2.75 and 1.60 to 1.16 due to exposed plasma was confirmed by Raman spectroscopy. X-ray diffraction (XRD) disclosed the decreased degree of crystallinity. Electric properties were measured by impedance analyser, dielectric constant was increased upto 11% for untreated GO dispersion and 47% for Air treated Plasma GO dispersed EVA composites. Plasma treatment further improved the exfoliated sites of GO and induced the defects, leading to optimized dielectric properties. Improved dielectric properties of EVA/GO can provide valuable insights into the potential applications in the field of electrical connectors, film capacitors, and pseudo capacitors.

Green synthesis of magnetite iron oxide nanoparticles using Azadirachta indica leaf extract loaded on reduced graphene oxide and degradation of methylene blue

In the current arena, new-generation functional nanomaterials are the key players for smart solutions and applications including environmental decontamination of pollutants. Among the plethora of new-generation nanomaterials, graphene-based nanomaterials and nanocomposites are in the driving seat surpassing their counterparts due to their unique physicochemical characteristics and superior surface chemistry. The purpose of the present research was to synthesize and characterize magnetite iron oxide/reduced graphene oxide nanocomposites (FeNPs/rGO) via a green approach and test its application in the degradation of methylene blue. The modified Hummer's protocol was adopted to synthesize graphene oxide (GO) through a chemical exfoliation approach using a graphitic route. Leaf extract of Azadirachta indica was used as a green reducing agent to reduce GO into reduced graphene oxide (rGO). Then, using the green deposition approach and Azadirachta indica leaf extract, a nanocomposite comprising magnetite iron oxides and reduced graphene oxide i.e., FeNPs/rGO was synthesized. During the synthesis of functionalized FeNPs/rGO, Azadirachta indica leaf extract acted as a reducing, capping, and stabilizing agent. The final synthesized materials were characterized and analyzed using an array of techniques such as scanning electron microscopy (SEM)-energy dispersive X-ray microanalysis (EDX), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction analysis, and UV–visible spectrophotometry. The UV–visible spectrum was used to evaluate the optical characteristics and band gap. Using the FT-IR spectrum, functional groupings were identified in the synthesized graphene-based nanomaterials and nanocomposites. The morphology and elemental analysis of nanomaterials and nanocomposites synthesized via the green deposition process were investigated using SEM–EDX. The GO, rGO, FeNPs, and FeNPs/rGO showed maximum absorption at 232, 265, 395, and 405 nm, respectively. FTIR spectrum showed different functional groups (OH, COOH, C=O), C–O–C) modifying material surfaces. Based on Debye Sherrer's equation, the mean calculated particle size of all synthesized materials was < 100 nm (GO = 60–80, rGO = 90–95, FeNPs = 70–90, Fe/GO = 40–60, and Fe/rGO = 80–85 nm). Graphene-based nanomaterials displayed rough surfaces with clustered and spherical shapes and EDX analysis confirmed the presence of both iron and oxygen in all the nanocomposites. The final nanocomposites produced via the synthetic process degraded approximately 74% of methylene blue. Based on the results, it is plausible to conclude that synthesized FeNPs/rGO nanocomposites can also be used as a potential photocatalyst degrader for other different dye pollutants due to their lower band gap.

Engineering CALF-20/graphene oxide nanocomposites for enhancing CO2/N2 capture performance

Ever-increasing atmospheric CO2 concentrations has necessitated the development of novel and cost-effective nanostructured composites with favorable physicochemical properties. Recently, the potential of metal-organic framework (MOF)-based nanocomposites towards boosting CO2 capture capability has become apparent indicating the importance of the relationship between their structure and properties. Herein, a novel nanocomposite of zinc-based CALF-20 MOF hybridized with graphene oxide is successfully fabricated using the solvothermal method. The construction of the well-structured nanocomposite is confirmed by performing PXRD, BET, FTIR, FESEM/EDX, TEM, and TGA characterization analyses. CO2 and N2 adsorption capacities and CO2/N2 separation performance of these nanocomposites are evaluated by experiment and mathematical modeling for the first time. The CALF-20/GO interfacial interaction and CO2 adsorption mechanisms are also discussed. As the best-performing adsorbent, the CALF-20 containing 20 wt% GO indicates a 42.6 % increment in CO2 uptake at 1.6 bar and a 32.7 % enhancement in CO2/N2 selectivity at 1 bar and 298 K and 1.28 times more CO2 retention time in a fixed bed column compared to that of the pristine MOF. The results show that the MOF and GO form chemical bonds at the interface resulting in generating new pore structures and increasing the porosity which are mostly responsible for boosting CO2 capture capacity. Interestingly, no meaningful effect is observed by the variation of the zinc atomic concentration at the surface. The simple synthesis procedure and understanding the interfacial structure of the novel CALF-20/GO composite as a promising adsorbent for CO2 capture applications can provide new insights for future work.

Biosynthesis of microrubble-shaped nanoporous Co3O4/rGO NCs using leaves extract of Neolamarckia cadamba and its antibacterial/antioxidant performance

Nowadays, the whole globe is paying great attention for the sustainable development, eco-friendly and economical production of nanostructures materials. With this motivation, the present work portrayed one-step ‘in-situ’ bioinspired green fabrication of Co3O4–reduced graphene oxide nanocomposites (Co3O4–rGO NCs) for the first time utilizing an aqueous leaf extract of Neolamarckia cadamba. As-fabricated NCs were characterized by several analytical and electron microscopic techniques viz. X-ray diffraction (XRD), Fourier Transform-Infrared (FT-IR), Energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), BET (Brunauer-Emmett-Teller), Scanning electron microscopy (SEM), and Transmission electron microscopy (TEM) to evaluate their phases, structure, shape, composition, chemical state, porosity, optical and morphological aspects. The XRD study revealed a cubic spinel symmetry of NCs, while crystallite size estimated around 25 nm. TEM spectroscopy exposed an average particle size 8–10 nm of Co3O4 grown on the surface of reduced graphene oxide (rGO NCs), whereas SEM analysis showed sharped microrubble-shaped morphology. The formation of NCs by doping metal oxide with rGO through in-situ method were confirmed by XRD, EDS, Raman, and XPS spectroscopy. The BET study estimated the specific surface area and pore size of NCs as 98 m2/g and 8.9 nm respectively. The Co3O4–rGO NCs demonstrated an effective bactericidal activity against S. aureus, E. coli, K. pneumoniae, and B. subtillis. Prominently it was found that, a significant antibacterial activity seen against E. coli and S. aureus at a concentration 0.1 mg/100 µL may be due to scaffold morphology, nanoscale-structures and nanoporosity of the NCs. Due to receiving significant antibacterial activity, material’s molecular docking was assessed. Furthermore, an antioxidant activity of leaf extract and NCs was evaluated by DPPH method. An outstanding biological study of bioinspired NCs revealed that material could be used as a potent antimicrobial agent.

Bio-Nano Synergy in Therapeutic Applications: Drug-Graphene Oxide Nanocomposites for Modulated Acetylcholinesterase Inhibition and Radical Scavenging.

The current study explores the synergistic application of biophysical chemistry and nanotechnology in therapeutic treatments, focusing specifically on the development of advanced biomaterials to repurpose FDA-approved Alzheimer's disease (AD) drugs as potent antioxidants. By integration of AD drugs into graphene oxide (GO) nanocomposites, an attempt to enhance the acetylcholinesterase (AChE) inhibition and increase radical scavenging activity is proposed. This bionano synergy is designed to leverage the unique properties of both the nanomaterial surface and the bioactive compounds, improving treatment effectiveness. The nanocomposites also promise targeted drug delivery, as GO can traverse the blood-brain barrier to inhibit AChE more effectively in AD patients. Furthermore, the drug-GO nanocomposite exhibits enhanced radical scavenging capabilities, offering additional therapeutic benefits. This study also elucidates a molecular level understanding on how the properties of the drugs are modified when integrated into nanocomposites with GO, enabling the development of more effective materials. The interdisciplinary approach presented in this study exploits the potential of nanotechnology to enhance drug delivery systems and achieve superior therapeutic outcomes through bionano synergy.

Fabrication of iron manganese oxide-reduced graphene oxide nanocomposite: A highly effective synergistic electrocatalyst for sensitive metronidazole detection

Efficient 2D-inorganic spinel perovskites nanostructure materials are used as potential candidates for highly sensitive detection of harmful substances present in the environment. In this regard, a facile one-pot hydrothermal synthesis was employed to fabricate nanocomposite material containing iron manganese oxide (FeMn2O4) decorated with reduced graphene oxide (rGO) which is used as an electrochemical detection of metronidazole (MTZ). The crystalline nature and structural insights of the as-synthesized FeMn2O4-rGO nanocomposite were established using various spectroscopic and electrochemical techniques. Distinctively FeMn2O4-rGO nanocomposite fashioned glassy carbon electrode (GCE) showed excellent linear range (0.01–512.2 μM), sensitivity (71.4 μA mM−1 cm−2), limit of detection (0.0129 μM), reproducibility, stability and resist-interference capability towards metronidazole (MTZ) antibiotic drug. In addition, the fabricated FeMn2O4-rGO/GCE electrochemical sensor exhibited a remarkable MTZ detection in spiked water as well as urine samples with better recovery percentages supporting its facile and feasible nature for environmental applications. The present work established the fabrication of FeMn2O4-rGO/GCE nanocomposite for effective determination of antibiotic drugs in real sample analysis.

Fast and efficient extraction and determination of nonsteroidal anti-inflammatory drugs using poly(8-hydroxyquinoline)-coated magnetic graphene oxide nanocomposite prior to capillary electrophoresis analysis in wastewater, breast milk, and urine samples.

In this study, magnetic graphene oxide coated with poly(8-hydroxyquinoline) was successfully synthesized, characterized, and utilized as a novel sorbent for the ultrasonic-assisted dispersive magnetic solid-phase extraction of naproxen and ibuprofen. These analytes served as representative analytes for two nonsteroidal anti-inflammatory drugs in various real samples. Characterization techniques, such as IR, X-ray powder diffraction, field emission scanning electron microscopy, energy-dispersive X-ray-mapping, and Brunauer-Emmett-Teller (BET), were used to confirm the correctness synthesis and preparation of the nanocomposites. Effective parameters on the extraction efficiency were investigated to maximize the analytical performance of the developed method. The dynamic range (1-1000µgL-1), coefficients of determination (R2≥0.997), the limits of detection (0.3-1.0µgL-1), and limit of quantification (1.0-3.0µgL-1), intra-day and inter-day precisions (3.5%-7.2%) were achieved. The method validation results showed extraction recovery ranging from 80.4% to 96.0% and preconcentration factors ranging from 137 to 140.

Controllable tribological behavior of PNIPAM-graphene oxide nanocomposites at titanium alloy interface

In order to improve antiwear properties of the cutting tool for titanium alloy, the temperature-sensitive poly(N-isopropylacrylamide) (PNIPAM)-graphene oxide (GO) nanocomposites were developed in this work. The tribological properties of the titanium alloy/cemented carbide contact lubricated with the PNIPAM-GO nanocomposites were investigated. The results show that the PNIPAM-GO nanocomposites have stable dispersive and controllable lubricating performance. The wear of the titanium alloy decreased and the adhesive behavior was improved with the increase of GO in the nanocomposites. The tribological performances are attributed to both the controllable release of GO sheets from the nanocomposites and the formation of a protective tribofilm. A mechanical mixing submechanism counts for the decrease of friction and wear of titanium alloy/cemented carbide contact lubricated by the nanocomposites.