Good Yields Research Articles

Acetic acid-driven one-pot synthesis of 4,7-dihydro-[1,2,3]thiadiazolo[5,4-b]pyridine-6-carboxamides and Pharmacological Evaluations.

A diverse set of 4,7-dihydro-[1,2,3]thiadiazolo[5,4-b]pyridine-6-carboxamides 4(a-o) were synthesized via a one-pot reaction of 5-amino[1,2,3]thiadiazole, various aromatic aldehydes, and different acetoacetanilides, using glacial acetic acid as the solvent and without the need for any catalysts. The resulting compounds were obtained in moderate to good yields. All the newly synthesized compounds were evaluated for their antimicrobial activity. Among them, compound 4e demonstrated superior efficacy against Salinivibrio proteolyticus strain of Gram-(-Ve)-bacteria compared to ciprofloxacin. Compound 4d exhibited the highest potency against the fungal strain Candida albicans surpassing Amphotericin B. 4d and 4e's physicochemical characteristics were assessed. According to docking analysis, DHTDAPy 4e shows the higher binding affinity of -7.2 kcal moL-1 in the binding cavity of the receptor. These findings illustrate the safety and tolerability as well as the potency of newly syntehsized DHTDAPy against the fungal and bacterial infections.

Access to Alkenyl Cyclobutanols by Ni‐Catalyzed Regio‐ and Enantio‐selective syn‐Hydrometalative 4‐exo‐trig Cyclization of Alkynones

Enantioselective synthesis of (spiro)cyclobutane derivatives poses significant challenges yet holds promising applications for both synthetic and medicinal chemistry. We report here a nickel‐catalyzed asymmetric syn‐hydrometalative 4‐exo‐trig cyclization of alkynones to synthesize alkenyl cyclobutanols with a tetrasubstituted stereocenter. This strategy features a broad substrate scope, delivering a variety of trifluoromethyl‐containing rigid (spiro)carbocycle skeletons in good yields and high enantioselectivities (up to 84% yield and 98.5:1.5 er). The synthetic utility is demonstrated through stereospecific transformations into fused spirocycles. Experimental and computational mechanistic studies indicate that the reaction is initiated by an active Ni–H species, with carbonyl‐directed hydrometalation as the key for regioselective control. This catalytic method provides a general solution for regioselective hydrofunctionalization of alkynes and represents an efficient reaction pattern for assembling highly strained enantioenriched bioisosteres.

Chemical Upcycling of Expired Pharmaceuticals as a Source of Value-Added Chemicals for Organic Synthesis and Medicinal Chemistry

Pharmaceutical and veterinary products are a class of contaminants of emerging concern, and their presence in the environment is due to continuous and incorrect disposal. Environmental scientists have been accumulating data on their adverse effects on animal populations since toxicological effects on wildlife were first published. Therefore, recycling strategies are needed. Valuable active ingredients can be extracted from expired pharmaceuticals and recycled according to various strategies. In an effort to reveal the potential of the chemical upcycling of expired pharmaceuticals, the active ingredients gabapentin and pregabalin were extracted and used as starting materials to prepare a small collection of promising substrates endowed with functionalities and structural three-dimensionality. Gabapentin 1 was transformed into aminoalcohol 3, spiroamine 4, and the bioactive azaspirolactam 5. The lactam analog 6 was synthesized from pregabalin 2. Due to the biological profile of 5 and the structural similarity of the N-alkylated derivatives 5l and 6b with the drug piracetam, a collection of potentially bioactive structural analogs 5a-l and 6a-b were also prepared. Simple extraction, synthesis, and purification procedures were used as a means of chemical and economic revaluation, resulting in moderate to good yields at a low cost.

Remote Sulfonylation of Anilines with Sodium Sulfifinates Using Biomass-Derived Copper Catalyst

A biomass-based catalyst, CuxOy@CS-400, was employed as an excellent recyclable heterogeneous catalyst to realize the sulfonylation reaction of aniline derivatives with sodium sulfinates. Various substrates were compatible, giving the desired products moderate to good yields at room temperature. In addition, this heterogeneous copper catalyst was also easy to recover and was recyclable up to five times without considerably deteriorating in catalytic efficiency. Importantly, these sulfonylation products were readily converted to the corresponding 4-sulfonyl anilines via a hydrolysis step. The method offers a unique strategy for synthesizing arylsulfones and has the potential to create new possibilities for developing heterogeneous copper-catalyzed C-H functionalizations.

Transition-metal-free synthesis of arylboronates via thermal generation of aryl radicals from triarylbismuthines in air

A simple and versatile synthesis of arylboronates has been achieved by using triarylbismuthines as aryl radical sources under transition-metal-free and open-air conditions. Conventional methods required photoirradiation or electrolysis to generate aryl radicals from triarylbismuthines. In this study, it was found that simply heating the solution of triarylbismuthines in benzotrifluoride (BTF) in air successfully led to the generation of aryl radicals, and the subsequent reaction with bis(pinacolato)diboron afforded a variety of arylboronates in moderate to good yields.

Divergent Annulations of 5,6‐Dihydro‐4H‐1,2‐Oxazine N‐Oxides and Enol Diazoacetates for the Switchable Chemoselective Synthesis of Fused 1,2‐Oxazine Derivatives

Reactions of 5,6‐dihydro‐4H‐1,2‐oxazine N‐oxides with enol diazoacetates were studied. A particular reaction path depends on the amount of catalyst and the order of the addition of the substrates. Use of Rh2(Oct)4 (2 mol.%) leads to chemoselective [3+3]‐annulation producing 1,2‐oxazine‐fused 1,2‐oxazine derivatives. With lower catalyst loadings (0.03 mol.%) enol diazoacetates are converted to cyclopropene derivatives, which in situ react with 1,2‐oxazine N‐oxides via tandem [3+2]‐cycloaddition‐rearrangement producing oxazine‐fused aziridines. Both transformations showed a wide substrate scope and produced target products with good yields and diastereoselectivity, thus allowing selective preparation of these rare heterocyclic systems. A mechanistic rationale for observed chemo‐ and stereo‐ selectivities was proposed.

NaIO4/NH2OH-mediated Efficient Synthesis of Phosphoroamidates from Anilines and Triethyl Phosphite

AbstractA simple, efficient, and metal-free method was developed for the synthesis of phosphoroamidates. In essence, a mixture of sodium periodate (NaIO4) and hydroxylamine (NH2OH⸱HCl) was used in stoichiometric amounts to execute the phosphoramidation reaction of aromatic amines and triethyl phosphites at room temperature, in open air. This method offers a practical synthesis route to afford a diverse range of phosphoroamidates via the construction of P − N bonds, with excellent functional group compatibility and good yields under mild conditions.

Electrochemical Giese Reaction of α-Trifluoromethylstyrenes with Disulfides: Efficient Access to β-Trifluoromethylated Thioethers.

An electrochemical Giese-type hydrothiolation of α-trifluoromethylstyrenes with disulfides is disclosed for the first time under metal-free and mild conditions. This approach provides a facile methodology for β-trifluoromethylated thioethers in moderate to good yields with high functional group tolerance starting from readily available substrates. Additionally, late-stage modification of drug molecules and gram-scale synthesis show practical advantages. The radical pathway of this reaction has been revealed by control experiments and cyclic voltammetry measurements.

Ligand-Controlled Selective Synthesis of Indoles and Benzofurans from Secondary Anilines.

A ligand-controlled method for the selective synthesis of indoles and benzofurans from secondary anilines has been discovered. A six-ring palladacycle intermediate may be involved in this process by olefins as a transient directing mediator to give indoles. The indole/benzofuran ratio can be easily tuned by the MPAA ligand. Various substituted secondary anilines were well-tolerated, affording the corresponding products in moderate to good yields. Indole-derived drugs such as JWH-081, BB-22, and ML-098 could be obtained using our new method to achieve their precursors. Preliminary mechanistic studies indicated that BQ is the key factor in avoiding the β-H elimination of insertion species.

Highly Efficient Catalysis of Pyridinium p‐Toluenesulfonate (PPTS): Two Facile One‐Pot Protocols for the Synthesis of 2,3‐Disubstituted Quinazolinone Scaffolds

AbstractTwo different one‐pot synthetic protocols have been developed for obtaining 2,3‐disubstituted quinazolin‐4(3H)‐ones using pyridinium p‐toluenesulfonate (PPTS) as catalyst. The two‐component reaction involves isatoic anhydride and N‐acetyl amine whereas the three‐component reaction use isatoic anhydride, aryl amine and β‐diketone in Toluene under classical heating at 80–100 °C to afford 2,3‐disubstituted quinazolin‐4(3H)‐ones in good yields. The two‐component reactions are compatible with various substituted aryl/alkyl amines.

EnantioselectiveSynthesis ofspiro[indoline-3,4- pyrrolo [3,4-b]pyridines] via Organocatalysed Three-Component Cascade Reaction.

Asymmetric synthesis of spiro[indoline-3,4-pyrrolo [3,4-b]pyridines] derivatives was first developed through organocatalytic cascade Knoevenagel/Michael/cyclization reaction using a quinidine -derived squaramide. Under the optimized conditions, the three-component reaction of isatins, cyanoacetates, and 3-aminomaleimides yield the desired heterocycle-fused spirooxindoles in good yields (78-91%) with 53-99% enantiomer excess (ee). Notably, this reaction enabled a broad substrate scope under mild conditions, and provided a convenient method for enantioselective construction of diverse spirooxindoles combined with dihydropyridine and maleimide skeleton, which brought great potential to build new bioactive chemical entities.

Conjugate Addition of 3‐Aryl Oxindoles to in situ generated o‐ Quinone Methides Without Essential Electronic or Steric Groups

Herein an efficient method for in situ generated o‐quinone methides without essential electronic or steric groups at the exocyclic methylene or on six‐membered ring was established. The method relies on acetylation of salicylylols and subsequently base promoted 1,4‐elimination. The in situ generated o‐quinone methides could be undergoing conjugate addition with 3‐aryl oxindoles in one‐pot reaction system, which provided 3,3‐disubstituted oxindoles bearing a quaternary stereocenter in good yields (up to 99%).

Divergent Sc(OTf)3‐Catalyzed Tandem Cyclization of o‐Hydroxyphenyl Enaminones with 1,3,5‐Triazinanes: Access to C3‐Aminomethyl Chromones and Tetrahydropyrimidines

A Sc(OTf)3‐catalyzed tandem cyclization reaction of o‐hydroxyphenyl enaminones with 1,3,5‐triazinanes has been developed to generate two distinct annulated products in moderate to good yields, which is dominated by the electronic characteristics of the 1,3,5‐triazinanes. The 1,3,5‐triaryl‐1,3,5‐triazinane was treated as C–N synthon to produce C3‐aminomethyl chromone, while the 1,3,5‐trialkyl‐1,3,5‐triazinane acted as C–N–C–N synthons to deliver N,N‐dialkyl tetrahydropyrimidine with a free hydroxyl group.

An Actinide Complex with a Nucleophilic Allenylidene Ligand.

The reaction of [Cp3Th(3,3-diphenylcyclopropenyl)] (Cp = η5-C5H5) with 1 equiv of lithium diisopropylamide (LDA) results in cyclopropenyl ring opening and formation of the thorium allenylidene complex, [Li(Et2O)2][Cp3Th(CCCPh2)] ([Li(Et2O)2][1]), in good yield. Additionally, deprotonation of [Cp3Th(3,3-diphenylcyclopropenyl)] with 1 equiv of LDA, in the presence of 12-crown-4 or 2.2.2-cryptand, results in the formation of discrete cation/anion pairs, [Li(12-crown-4)(THF)][Cp3Th(CCCPh2)] ([Li(12-crown-4)(THF)][1]) and [Li(2.2.2-cryptand)][Cp3Th(CCCPh2)] ([Li(2.2.2-cryptand)][1]), respectively. Interestingly, the complex [Li(Et2O)2][1] undergoes dimerization upon standing at room temperature, resulting in the formation of [Cp2Th(μ:η1:η3-CCCPh2)]2 (2), via loss of LiCp. The reaction of [Li(Et2O)2][1] with MeI results in electrophilic attack at the Cγ carbon atom, leading to the formation of a thorium acetylide complex, [Cp3Th(C≡CC(Me)Ph2)] (3), which can be isolated in 83% yield upon workup, whereas the reaction of [Li(Et2O)2][1] with benzophenone results in the formation of 1,1,4,4-tetraphenylbutatriene (4) in 99% yield, according to integration against an internal standard. Density functional theory (DFT) calculations performed on [1]- and 2 reveal significant electron delocalization across the allenylidene ligand. Additionally, calculations of the 13C NMR chemical shifts for the Cα, Cβ, and Cγ nuclei of the allenylidene ligand were in good agreement with the experimental shifts. The calculations reveal modest deshielding induced by spin-orbital effects originating at Th due to the involvement of the 5f orbitals in the Th-C bonds. According to a DFT analysis, the cyclopropenyl ring-opening reaction proceeds via [Cp3Th(η1-3,3-Ph2-cyclo-C3)]- (IM), which features a carbanion character at Cβ.

Photoredox/Copper-Cocatalyzed Domino Annulation of Oxime Esters and NH4SCN: Access to Fully Substituted 2-Aminothiazoles.

Domino cyclization of oxime esters and NH4SCN facilitated by photoredox and copper cocatalysis has been established. Various structurally diverse fully substituted 2-aminothiazoles have been obtained in good yields at room temperature. It is featured by mild conditions, favorable functional group tolerance, and wide substrate scope. The present reaction is amenable to gram-scale synthesis, which is expected to find potential applications in organic synthesis and drug discovery. A plausible reaction mechanism is proposed.

C–H Activation: A Versatile Tool for the Synthesis of Niclosamide and Its Derivatives

AbstractA novel strategy has been developed for the direct and regioselective ortho-acetoxylation of N-(2-benzoylphenyl)benzamides through C–H activation using a catalytic amount of Pd(OAc)2 (5 mol%) and a stoichiometric amount of PhI(OAc)2 in a mixture of acetic anhydride and acetic acid. By using this protocol, a new series of niclosamide derivatives was produced in good yields. This is the first report on the synthesis of niclosamide and its derivatives by means of C–H functionalization. This newly developed method offers several advantages such as high regioselectivity, operational simplicity, and good to excellent yields. It provides a short three-step process for the synthesis of niclosamide involving acid–amine coupling, ortho-acetoxylation through C–H activation, and deacylation.

Pd/Mengphos-Catalyzed High-order [4+4] Cycloaddition for Efficient Synthesis of Oxazocines

The development of new catalytic system that enable regio- and chemoselective construction of diversely functionalized oxazocines is an important topic in organic synthesis and pharmacochemistry. Herein, a novel Pd/Mengphos complex was designed and applied in palladium-catalyzed high-order [4+4] cycloaddition of 2-substituted allylic carbonates to , β-unsaturated imines, allowing facile access to versatile oxazocines in good yields with excellent b/l selectivities, and Z/E selectivities (up to 92% yield, complete b/l and Z/E selectivity). The reaction exhibited a broad substrate scope, mild reaction condition and good functional group compatibility. In addition, asymmetric version has also been tested, affording the desired oxazocines in moderate to good enantioselectivity.

Photoredox-Catalyzed Cross-Coupling of In Situ Generated Quinoxalinones with Indoles for the Synthesis of Tertiary Alcohols.

A visible light-driven photoredox-catalyzed direct C(sp2)-H functionalization of N-H free indoles with quinoxalinones generated in situ from 2,2-dihydroxy-1H-indene-1,3(2H)-dione and phenylene-1,2-diamines has been reported with the aid of Na2-Eosin Y as the photocatalyst and the Hünig base as the sacrificial electron and proton donor. The reaction provides easy access to a variety of quaternary-centered C-3 selective indole-substituted tertiary alcohols in good yields. Mechanistic studies demonstrated the realization of photoredox-catalyzed in situ quinoxalinone formation and their proton-coupled single electron reduction to the corresponding ketyl radicals followed by cross-coupling with indoles. The potential applications of the synthesized tertiary alcohols in photoacid-catalyzed carbon-carbon and carbon-sulfur bond-forming reactions feature the key findings of the present work.

Synthesis of Biheteroaryls by Pd-Catalyzed Homocoupling of Heteroaryl Bromides.

Symmetrical biheteroaryl compounds, such as bypyridines and bipyrazoles, are important ligands in transition-metal catalysis. They also serve as synthetic precursors of photo catalysts/sensitizers, bioactive agents, and energetic materials. To facilitate the concise synthesis of these useful structures, an efficient Pd-catalyzed homocoupling of heteroaryl bromides has been successfully established using the electron-rich and sterically hindered monophosphorus ligand BIDIME. The coupling protocol features a tandem Miyaura borylation/Suzuki coupling sequence and exhibits unprecedented tolerance of a wide range of heteroaryl bromides, providing a series of symmetrical biheteroaryls in moderate to good yields. Notably, the use of the corresponding polymeric ligand, PolyBIDIME, enabled the recycling of a palladium catalyst, demonstrating the potential of the homocoupling in practical applications.

Three‐Component Synthesis of Fluorescent 1,4‐Benzothiazin‐2‐ones Through Thiol‐Free Iodine‐Catalyzed Cyclization

AbstractA convergent synthesis of 2H‐benzo[b][1,4]thiazin‐2‐one was achieved via iodine‐catalyzed three‐component reaction. This strategy involves the formation of two new C−S bonds and a C−N bond from the readily available precursors ‐ aryl methyl ketones, p‐anisidine, and elemental sulfur to generate the desired heterocycle in moderate to good yields. As the synthesized benzothiazine‐2‐ones are fluorescent under UV light, photophysical properties like solid‐state emission, solvatochromism, Aggregation Induced Emission (AIE), and the relative quantum yields of the compounds were measured which proves them to be a potential candidate for the development of optoelectronic devices.