Geophysical Expression Research Articles

Assessing magmatic contributions to rift-related geothermal systems in collisional orogens: Insights from the Sangri-Cona rift, southern Tibetan Plateau

Fault-controlled geothermal systems in the Himalayan-Tibetan orogen could receive heat and material from deep-seated magmas due to crustal anatexis in orogenic settings. The near N-S trending rifts in southern Tibetan Plateau host abundant geothermal systems but potential role of residual magmas remains less constrained. Here, we evaluate magmatic contributions to geothermal systems in Sangri-Cona rift (SCR), the youngest rift in southern Tibetan Plateau, based on chemical and isotopic compositions of thermal waters from a south-to-north sampling profile. Our results show that the thermal springs in the central SCR have significant inputs from magmatic fluids, which account for high B concentrations and positive shift in δ18OH2O, while those in the southern and northern SCR are dominated by recharge of meteoric water. Water-rock interaction constrained by 87Sr/86Sr, hydrochemistry, and geothermometry results, suggests a hotter or deeper groundwater circulation path beneath central SCR than that of the southern and northern SCR. The identified magmatic fluid inputs, higher reservoir temperature, and higher degrees of water–rock interaction in the central SCR agree well with the presence of high conductivity anomalies at crustal depths of ∼ 10–30 km revealed by magnetotelluric surveys. Our findings provide geochemical evidence for the impact of lithospheric extension and associated geological and geophysical expressions (e.g., extension-induced exhumation of genesis domes that recorded crustal anatexis and upwelling of partially molten crustal channel flows) on modern geothermal systems in collisional orogens.

Don't judge an orogen by its cover: Kinematics of the Appalachian décollement from seismic anisotropy

Abstract As North America collided with Africa to form Pangea during the Alleghanian orogeny, crystalline and sedimentary rocks in the southeastern United States were thrust forelandward along the Appalachian décollement. We examined Ps receiver functions to better constrain the kinematics of this prominent subsurface structure. From Southeastern Suture of the Appalachian Margin Experiment (SESAME) and other EarthScope stations on the Blue Ridge–Piedmont crystalline megathrust, we find large arrivals from a 5–10-km-deep converter. We argue that a strong contrast in dipping anisotropic foliation occurs at the subhorizontal Appalachian décollement, and propose that such a geometry may be typical for décollement structures. Conversion polarity flips can be explained by an east-dipping foliation, but this orientation is at odds with the overlying northeast-trending surface tectonic grain. We suggest that prior to late Alleghanian northwest-directed head-on collision, the Appalachian décollement accommodated early Alleghanian west-vergence, independent of the overlying Blue Ridge–Piedmont structural inheritance. The geophysical expression of dipping anisotropic foliation provides a powerful tool for investigating subsurface kinematics, especially where they are obscured by overlying fabric, to disentangle the tectonic complexities that embody oblique collisional orogens.

Geophysical evidence for submarine methane seepage on the Western slope of Okinawa Trough

Identifying seafloor methane seepage efficiently has important implications for assessing environmental impact, reducing the uncertainty of top seal integrity, understanding the petroleum system, and mitigating the drilling hazards due to shallow gas influx. Pore water geochemistry analyses suggest that the study area has an extremely high methane seepage flux and active methane anaerobic oxidation processes. However, geochemical data cannot provide details about the internal seepages. The geophysical dataset from the Western slope of Okinawa Trough, including 2D high-resolution seismic, sub-bottom profiles, and bathymetry, gives us a good opportunity to understand the detailed characteristics of methane seepages in this study. Geophysical data have revealed numerous methane seepage-related features such as seismic chimneys, pockmarks, submarine domes, and amplitude anomalies, including bright spots and enhanced reflections. Pockmarks and domes are often associated with seismic chimneys, indicating that fluid migration is important in their formation. The various geophysical expressions may represent different stages of methane seepage. Fluid quickly drains, causing severe sediment deformation and forming pockmarks, whereas domes may indicate the early stages of fluid discharge. Chimneys that do not extend to the seafloor may indicate that the venting is gradual and focused. Flares linked to domes or pockmarks may indicate that the fluid migration is active. Several factors triggered the existence of methane seepages on the Western slope of the Okinawa Trough, including tectonic setting, overpressure and rapid sedimentation.

Upper-plate structure and tsunamigenic faults near the Kodiak Islands, Alaska, USA

AbstractThe Kodiak Islands lie near the southern terminus of the 1964 Great Alaska earthquake rupture area and within the Kodiak subduction zone segment. Both local and trans-Pacific tsunamis were generated during this devastating megathrust event, but the local tsunami source region and the causative faults are poorly understood. We provide an updated view of the tsunami and earthquake hazard for the Kodiak Islands region through tsunami modeling and geophysical data analysis. Using seismic and bathymetric data, we characterize a regionally extensive seafloor lineament related to the Kodiak shelf fault zone, with focused uplift along a 50-km-long portion of the newly named Ugak fault as the most likely source of the local Kodiak Islands tsunami in 1964. We present evidence of Holocene motion along the Albatross Banks fault zone, but we suggest that this fault did not produce a tsunami in 1964. We relate major structural boundaries to active forearc splay faults, where tectonic uplift is collocated with gravity lineations. Differences in interseismic locking, seismicity rates, and potential field signatures argue for different stress conditions at depth near presumed segment boundaries. We find that the Kodiak segment boundaries have a clear geophysical expression and are linked to upper-plate structure and splay faulting. The tsunamigenic fault hazard is higher for the Kodiak shelf fault zone when compared to the nearby Albatross Banks fault zone, suggesting short wave travel paths and little tsunami warning time for nearby communities.

Magnetic Expression of Hydrothermal Systems Hosted by Submarine Calderas in Subduction Settings: Examples from the Palinuro and Brothers Volcanoes

Volcanism is the most widespread expression of cyclic processes of formation and/or destruction that shape the Earth’s surface. Calderas are morphological depressions resulting from the collapse of a magma chamber following large eruptions and are commonly found in subduction-related tectono-magmatic regimes, such as arc and back-arc settings. Some of the most impressive examples of seafloor hydrothermal venting occur within submarine calderas. Here, we show the results of magnetic investigations at two hydrothermally active submarine calderas, i.e., Palinuro Seamount in the Southern Tyrrhenian Sea, Italy, and Brothers volcano of the Kermadec arc, New Zealand. These volcanoes occur in different geodynamic settings but show similarities in the development of their hydrothermal systems, both of which are hosted within calderas. We present a new integrated model based on morphological, geological and magnetic data for the Palinuro caldera, and we compare this with the well-established model of Brothers caldera, highlighting the differences and common features in the geophysical expressions of both hydrothermal systems. For consistency with the results at Brothers volcano, we build a model of demagnetised areas associated with hydrothermal alteration derived from 3D inversion of magnetic data. Both these models for Brothers and Palinuro show that hydrothermal up-flow zones are strongly controlled by caldera structures which provide large-scale permeability pathways, favouring circulation of the hydrothermal fluids at depth.

Geophysical insights into Paleoproterozoic tectonics along the southern margin of the Superior Province, central Upper Peninsula, Michigan, USA

The southern margin of the Archean Superior Province in the central Upper Peninsula of Michigan was a nexus for key Paleoproterozoic tectonic events involved in the ~2.1 Ga rifting of proposed Archean supercraton Superia and subsequent assembly of Laurentia. Interpretations of the region’s tectonic history have historically been hampered by extensive Pleistocene glacial and Paleozoic sedimentary cover and a lack of appropriate geophysical data. These rifting and orogenic events formed geologic effects that are readily mappable with modern geophysical methods. New aeromagnetic and gravity data provide a critical means of mapping and interpreting the complex geological framework through cover, allowing development of significantly richer geographical and process-based perspectives on all these tectonic events. Interpretations of Precambrian contacts and structure are here, for the first time, carried >30 km eastward under Paleozoic cover. Effects of ~2.1 Ga rifting are strongly expressed geophysically, including the Dickinson Group, perhaps a unique record of the progression of rift-related sedimentation and magmatism, shown here to be a geographically extensive and largely concealed tectonic feature of the southern Superior Province. The geophysical evidence for plausible ~2.1 Ga rift-related intrusive magmatism includes a previously unrecognized swarm of northeast-striking mafic dikes cutting Archean rocks and gravity lows produced by granites. Effects of the ~1.87–1.83 Ga Penokean orogeny include gravity and magnetic gradients and pattern breaks along the Niagara fault zone suture, abundant evidence for thin-skinned thrusting and folding in the Menominee iron district, and speculative emplacement of an allochthonous sedimentary sequence in the Calumet trough. Numerous east–west trending structures imaged geophysically likely originated, or were significantly reactivated by, post-Penokean deformation. Metamorphic events at ~1.76 Ga and ~1.65 Ga may correspond to orogenies involving younger, outboard Paleoproterozoic crustal provinces recognized in southern Laurentia. For example, the previously unrecognized West Branch fault, separating the Dickinson Group from Archean rocks, is shown to be a major structure in the region, and is a proposed expression of ~1.76 Ga thick-skinned deformation. Oblique disruptions of crudely east–west striking structures have robust geophysical expressions and are speculatively connected to transpressive deformation at ~1.65 Ga. These new geophysical observations and interpretations collectively help illuminate a critical period in the tectonic evolution of Laurentia, as it transitioned from a disparate array of Archean cratons to a more coherent, growing continent.

Geophysical expression of the Meyers Crater, a new meteorite impact crater discovered in the Coolgardie Goldfield of Western Australia

SummaryDetailed airborne electromagnetic (VTEM), gravity and passive seismic HVSR surveying, followed up by RC and diamond drilling, has identified an isolated circular and geologically young meteorite impact crater filled with sediments and located next to the town of Coolgardie in Western Australia. It was discovered in 2017 (Meyers, 2017), is 800 m in diameter and estimated to be >140 m deep based on passive seismic results, because only angled drilling was carried out for gold exploration along the western side of the crater. The crater has been filled with impact debris and sedimentary deposits to form a flat modern topographic feature. The pre-impact bedrock is Archean greenstone, which hosts numerous gold occurrences and mines surrounding the crater. The crater is filled with a polymict impact breccia of mixed greenstone rocks from below and surrounds near its base. A thin (<2 m) tuffaceous looking ejecta layer occurs at the boundary between the impact breccia and underlying in situ brecciated greenstone bedrock (high Mg basalt and ultramafic lava). This transition zone is also imaged as two “bedrock” layers in passive seismic HVSR cross-sections. The impact breccia is overlain by a very thick deposit of anoxic peat and carbonised wood fragments containing framboidal pyrite, as well as slump blocks of greenstone rocks, starting from over 120 m deep to a depth of 14 m from surface, where this organic layer is capped by a fine clay deposit, which was likely transported into the crater after its raised rim was breached by erosion. The crater and its fill deposits cannot explain the entire circular gravity anomaly low of -5mGal, and the brecciated in situ greenstone bedrock around and below the crater is modelled to contribute to the gravity anomaly low. It is estimated that the meteorite projectile was about 40 m in diameter, came from an easterly trajectory, and impacted Coolgardie between the Miocene to Pleistocene, with age dating and Ir analysis of the impact layer and overlying plant material soon to be carried out. A high-resolution ground magnetic survey using 10 m line spacing was carried out to try and detect large iron meteorite fragments, but only a weak and diffuse anomaly pattern occurs at the crater centre, indicating that the meteorite was highly fragmented on impact and/or later demagnetised by weathering. A vertical diamond drillhole down the centre of the crater is required to properly study this relatively young impact structure and analyse the preserved plant material filling the crater over a vertical column of 100 m or more, continuously recording local environmental changes over a considerable time period.

The geological characteristics, geochemical signature and geophysical expression of porphyry copper-(gold) deposits in the circum-Pacific region

Porphyry deposits of the circum-Pacific region contain a large amount of the world’s copper, molybdenum and gold. These deposits are formed from calc-alkaline and potassic magmas characterized by v...

Update on the geophysical expression of the Abra sedimentary replacement Pb-Ag-Cu-Au deposit, Western Australia

The Abra sedimentary replacement Pb-Ag-Cu-Au deposit is located in the Paleoproterozoic Edmund Basin, 900km NNE of Perth. Mineralisation at Abra has no surface expression and the deposit was discov...

A Multiproxy provenance approach to uncovering the assembly of East Gondwana in Antarctica

East Gondwana is generally thought to have assembled through the amalgamation of Indo-Antarctica and Australo-Antarctica along the Ediacaran–Cambrian Kuunga orogen. The location of a boundary between Indo-Antarctica and Australo-Antarctica within this key Gondwana-forming orogen remains controversial because extensive ice cover in East Antarctica precludes traditional characterization of terranes. Here, we integrated Pb-isotope analysis of detrital feldspar grains with U-Pb dating of detrital monazite and zircon grains from offshore sediments to infer the location of the onshore boundary between Indo-Antarctica and Australo-Antarctica. New and compiled data from onshore basement exposures highlight the different age and Pb-isotope signatures of Indo-Antarctica and Australo-Antarctica. Holocene sediments offshore from Mirny Station (Queen Mary Land, East Antarctica) have detrital feldspar Pb-isotope signatures and detrital monazite and zircon U-Pb ages that reflect contributions from both Indo-Antarctica and Australo-Antarctica. The presence of both Indo-Antarctic and Australo-Antarctic crust beneath ice cover near Mirny Station implies proximity to a fundamental terrane boundary within the Kuunga orogen, which could coincide with a geophysical lineament at ∼94°E (Mirny fault). The geophysical expression of this boundary extends into the subglacial interior of East Antarctica, where, prior to more recent rifting, it may have connected with one or more previously inferred Gondwana-forming sutures. The revised geometry of the Kuunga orogen suggests that the assembly of East Gondwana involved dominantly strike-slip motion in the Mirny region coupled with high-angle convergence between Indo-Antarctica and Australo-Antarctica to the west.

A diverted submarine channel of Early Cretaceous age revealed by high-resolution seismic data, SW Barents Sea

Abstract Mud-rich prograding sediment lobes make for most of the Barremian – Albian stratigraphic record in the SW Barents Sea. Submarine canyons and channels potentially represent key components of sediment transport from shelf to basin floor but geological evidences are lacking. We present high-resolution seismic data and scrutinize an elongated, ∼150-km long bright seismic amplitude and resistive anomaly located alongslope of a NW-sourced Barremian delta in the SW Barents Sea. Seismic interpretation is performed on a comprehensive database comprising 3D/2D high-resolution P-Cable and conventional seismic data, tied to three exploration wells to provide age-control on key horizons. Our results highlight that the elongated geophysical anomaly originates from a soft layer deposited over a harder, erosional surface. The erosive morphology displays three narrow, V-shaped incisions to the NE of the Hoop area which develop into a single, ∼6 km-wide, U-shaped channel towards the transition to the Fingerdjupet Subbasin. The geological feature is named Ceres and interpreted as a submarine channel carved in Aptian, a period of marked sea level rise and sediment starvation in the Hoop area. An evolutionary model of a diverted submarine channel is proposed where a flooded delta lobe acted as a topographic barrier, funneling bottom currents and thereby carving an alongslope, possibly contouritic channel. This is the first documented case of a submarine channel pathway – delta lobe interaction on the Norwegian continental shelf. To account for the geophysical expression of Ceres, two competing explanations are discussed: (1) hydrocarbon-bearing sands, and (2) organic-rich source rock. Both scenarios have important implications for petroleum prospectivity: a faulted stratigraphic trap holding large volumes of hydrocarbons or alternatively the channel-controlled distribution of mature Aptian source rock in the SW Barents Sea.

Geophysical expression of the Leka Ophiolite, Norway, modeled from integrated gravity, magnetic and petrophysical data

Geophysical expression of the Leka Ophiolite, Norway, modeled from integrated gravity, magnetic and petrophysical data

The Relevance of Fluid Inclusions to Mineral Systems and Ore Deposit Exploration

ABSTRACT Fluid inclusions provide the only direct samples of palaeofluids that may be related to mineralisation processes. In order to apply fluid inclusion data to study fluid flow on a larger scale, we have used a mineral systems approach, which regards a mineral deposit as part of a much larger system and considers all the processes that are involved in mobilising ore components from a source, transporting and accumulating them in a more concentrated form and then preserving them throughout the subsequent geological history. This not only enables a better understanding of fluid flow processes but also enables fluid inclusions to provide an exploration target that is much larger than the ore deposit itself. As an example, a study of fluid inclusions associated with gold mineralisation in the Tanami Region of Northern Australia was used to determine the temperatures and compositions of the ore fluids. Once the parameters of the mineralising fluids were established, the study was then expanded to a region of central Australia covering almost 100,000 km2. It was concluded that a high temperature (320 – 360 °C), low salinity fluid containing CO2 and other gases was circulating in the northern part of this region at around 1720 Ma. This suggests the circulation of an orogenic gold style fluid and indicates that this region has potential for other orogenic gold deposits. In the southern part of this region, a lower temperature (120 to 190 °C), high salinity fluid with no detectable gases was present and appears to represent circulation of a basinal brine. In the second example, fluid inclusion data from Cu-U-Au-Ag-REE prospects in the Olympic Copper-Gold Province in South Australia were used to constrain geochemical modelling of the mineralisation processes. By combining the inversion-generated, 3-D geophysical maps with geochemical and magnetic susceptibility values derived from the modelling, it has been possible to divide the range of observed magnetic susceptibilities into divisions that represent the various alteration assemblages within this region. This approach allows us to use geochemical modelling to relate alteration assemblages, and hence, the predicted sites of mineralisation, to the geophysical expressions of the mineral deposit.

Geophysical expression of buried range-front embayment structure: Great Sand Dunes National Park, Rio Grande rift, Colorado

Great Sand Dunes National Park and Preserve (GRSA, Colorado) lies along the eastern margin of the San Luis Basin and the tectonically active Sangre de Cristo fault system that are part of the northern Rio Grande rift. GRSA lies within a prominent embayment in the range front where two separate sections of the Sangre de Cristo fault system intersect. Fault scarps are observed along both intersecting fault zones within older basin-fill alluvium, but have been obscured by the actively migrating dunefield. The dune sand is also strongly magnetic, locally limiting the usefulness of aeromagnetic methods for mapping concealed structure. This study uses airborne geophysical methods, primarily airborne gravity gradient data, along with constraints from geologic mapping and limited subsurface data and groundwater modeling, to interpret the subsurface basin geometry and range-front structure of the embayment. Using forward modeling of the gravity gradient data and locations of faults inferred from gravity gradient and aeromagnetic lineaments, several previously unrecognized tectonic elements are interpreted adjacent to the range front. Some of the largest rift-­related fault offsets are demonstrated to be basinward of the normal fault zones mapped at the surface along the range front of the Sangre de Cristo Mountains, along faults concealed under the dunefield and subparallel to the two fault sections. A fault-bounded structural bench, likely composed of Proterozoic rocks, underlies most of the high dunefield at depths of 500 m to 1 km. The bench is truncated on its southwest margin by a northwest-trending, southwest-dipping normal fault. A northeast-trending, northwest-dipping normal fault with ∼600 m of estimated relief lies under the southern margin of the dunefield and bounds a structurally higher bench of Proterozoic rocks concealed at <400 m depth near the range front. The northwest- and northeast-trending geophysical lineaments generally correspond well with the trends of faults mapped at the surface, and with both pre- and syn-rift structures in the Sangre de Cristo Mountains. Aeromagnetic anomalies are explained by variations in the magnetization of pre-rift rocks, and the strongly magnetic dune sand.

Redefined crustal structure of the Buchan Rift, northeast Victoria: evidence from potential field modelling of newly acquired land-based gravity data

ABSTRACTThe Buchan Rift, in northeastern Victoria, is a north–south-trending basin, which formed in response to east–west crustal extension in the Early Devonian. The rift is filled mostly with Lower Devonian volcanic and volcaniclastic rock of the Snowy River Volcanics. Although the structure and geometry of the Buchan Rift and its major bounding faults are well mapped at the surface, a discrepancy exists between the surface distribution of the thickest rift fill and its expected potential field response. To investigate this variation, two new detailed land-based gravity surveys, which span the rift and surrounding basement rocks in an east–west orientation, have been acquired and integrated with pre-existing government data. Qualitative interpretation of the observed magnetic data suggests the highly magnetic rocks of the Snowy River Volcanics have a wider extent at depth than can be mapped at the surface. Forward modelling of both land-based gravity data and aeromagnetic data supports this interpretation. With the Snowy River Volcanics largely confined within the Buchan Rift, resolved geometries also allow for the interpretation of rift boundaries that are wider at depth. These geometries are unusual. Unlike typical basin inversions that involve reactivation of rift-dipping faults, the bounding faults of the Buchan Rift dip away from the rift axis and thus appear unrelated to the preceding rifting episode. Limited inversion of previous extensional rift faults to deform the rift-fill sequences (e.g. Buchan Synclinorium) appears to have been followed by the initiation of new reverse faults in outboard positions, possibly because the relatively strong igneous rift fill began to act as a rigid basement ramp during continued E–W crustal shortening in the Middle Devonian Tabberabberan Orogeny. Overthrusting of the rift margins by older sediments and granite intrusions of the adjacent Tabberabbera and Kuark zones narrowed the exposed rift width at surface. This scenario may help explain the steep-sided geometries and geophysical expressions of other rift basins in the Tasmanides and elsewhere, particularly where relatively mechanically strong basin fill is known or suspected.

Fission and reconfiguration of bilobate comets as revealed by 67P/Churyumov-Gerasimenko.

The solid, central part of a comet--its nucleus--is subject to destructive processes, which cause nuclei to split at a rate of about 0.01 per year per comet. These destructive events are due to a range of possible thermophysical effects; however, the geophysical expressions of these effects are unknown. Separately, over two-thirds of comet nuclei that have been imaged at high resolution show bilobate shapes, including the nucleus of comet 67P/Churyumov-Gerasimenko (67P), visited by the Rosetta spacecraft. Analysis of the Rosetta observations suggests that 67P's components were brought together at low speed after their separate formation. Here, we study the structure and dynamics of 67P's nucleus. We find that sublimation torques have caused the nucleus to spin up in the past to form the large cracks observed on its neck. However, the chaotic evolution of its spin state has so far forestalled its splitting, although it should eventually reach a rapid enough spin rate to do so. Once this occurs, the separated components will be unable to escape each other; they will orbit each other for a time, ultimately undergoing a low-speed merger that will result in a new bilobate configuration. The components of four other imaged bilobate nuclei have volume ratios that are consistent with a similar reconfiguration cycle, pointing to such cycles as a fundamental process in the evolution of short-period comet nuclei. It has been shown that comets were not strong contributors to the so-called late heavy bombardment about 4 billion years ago. The reconfiguration process suggested here would preferentially decimate comet nuclei during migration to the inner solar system, perhaps explaining this lack of a substantial cometary flux.

Structure of the lithosphere of the northeastern part of the Indian Ocean according to results of two-dimensional structural-density modeling

From a gravitational field analysis, the lithosphere was regionalized and a structural schematic map of the eastern part of the Indian Ocean was compiled. The area adjacent to the western margin of Australia was studied. The region is characterized by a complex lithospheric structure. It includes heterogeneous blocks of varying age, framed by structures with different morphological and geophysical expression and varying genesis. To clarify the peculiarities of tectonic structures of various genetic types, structural-density modeling was performed. This made it possible to establish certain gravimetric indicators characteristic of structures of various genesis.

Relations between Potiguar Rift structural framework and the adjacent basement: analysis of gravity and magnetic data

Os métodos gravimétricos e magnéticos classicamente apresentam boas respostas para o estudo do arcabouço tectônico de bacias sedimentares. Neste trabalho, foram aplicadas técnicas avançadas de processamento de dados geofísicos (redução ao polo, matched filter, gradiente horizontal total e inclinação do sinal analítico do gradiente horizontal total), com o objetivo de caracterizar a expressão geofísica das principais estruturas do Rifte Potiguar e do seu embasamento cristalino (NE do Brasil). Com o intuito de se estabelecer o comportamento dos principais blocos crustais da Província Borborema sob o pacote sedimentar da Bacia Potiguar, foram identificados oito domínios tectono-geofísicos através da correlação dos padrões anômalos das fontes causativas com dados geológicos disponíveis na literatura. Os extensos sistemas de falhas, que limitam o Rifte Potiguar, apresentam-se como expressivos lineamentos gravimétricos positivos. As principais zonas de cisalhamento, que limitam os blocos crustais da Província Borborema, foram também correlacionadas com expressivas anomalias alongadas na direção NE-SW. A integração dos diversos mapas geofísicos com a geologia de superfície permitiu correlacionar a expressão geofísica dessas estruturas e estabelecer a sua influência nos processos de rifteamento, pelos quais passou a bacia, inclusive as feições estruturais NE-SW, observadas nas regiões adjacentes a bacia. Foi possível definir a presença dessas feições abaixo da coluna sedimentar da Bacia Potiguar, as quais controlaram fortemente a estruturação interna do Rifte Potiguar. Tais resultados corroboram as hipóteses que sugerem a influência de estruturas pré-cambrianas na formação da bacia durante o rifteamento na margem continental leste do Brasil. É importante ressaltar que a inferência de deformações com trend NW-SE, reveladas principalmente pelos dados magnéticos, contribui para a hipótese de que tenha ocorrido a propagação dos esforços tectônicos E-W, que formaram a margem equatorial, para o interior do continente. Tais esforços também influenciaram o truncamento de estruturas do embasamento, deformações com direção NW-SE nos diques Rio Ceará-Mirim e causaram o arrasto lateral de direção E-W, que ocorre entre a Zona de Cisalhamento Portalegre e o Sistema de Falhas de Carnaubais.

The distribution of basal water between Antarctic subglacial lakes from radar sounding

Antarctica's subglacial lakes have two end member geophysical expressions: as hydraulically flat, radar reflective regions highlighted in ice surface topography and radar sounding profiles ('definite lakes'), and as localized sites of elevation change identified from repeat elevation observations ('active lakes') that are often found in fast flowing ice streams or enhanced ice flow tributaries. While 'definite lakes' can be identified readily by high bed reflectivity in radar sounding, the identification and characterization of less distinct subglacial lakes and water systems with radar sounding are complicated by variable radio-wave attenuation in the overlying ice. When relying on repeat elevation observations, the relatively short times series and biased distribution of elevation observations, along with the episodic nature of 'active lake' outflow and replenishment, limit our understanding of how water flows under the ice sheet. Using recently developed methods for quantifying the radar scattering behaviour of the basal interface of the ice, we can avoid the problem of attenuation, and observe the plumbing of the subglacial landscape. In West Antarctica's Ross Sea Embayment, we confirm that extensive distributed water systems underlie these ice streams. Distributed water sheets are upstream in the onset regions of fast flow, while canal systems underly downstream regions of fast flow. In East Antarctica, we use specularity analysis to recover substantial hydraulic connectivity extending beyond previous knowledge, connecting the lakes already delineated by traditional radar sounding or surface elevation transients.

Geological and geophysical expression of a primary salt weld: An example from the Santos Basin, Brazil

Primary salt welds form at the base of minibasins in response to complete evacuation of autochthonous salt. Analytical and numerical models suggest it is difficult to completely remove salt from a weld by viscous flow alone, which is especially true in multilayered evaporites, within which flow is likely heterogeneous due to lithologically controlled viscosity variations. Welds are important in the hydrocarbon industry because they may provide a hydrodynamic seal and trap hydrocarbons, or may allow transmission of fluids from source to reservoir rocks. Few papers document the subsurface expression of welds, principally because they have not been penetrated by wells or because the associated data are proprietary. We use 3D seismic and borehole data from the Santos Basin, offshore Brazil to characterize the geological and geophysical expression of a primary weld associated with flow of Aptian salt. The seismic data that we evaluated suggested that, locally, presalt and postsalt rocks are in contact at the base of an Upper Cretaceous minibasin, implying that several apparent welds, separated by low-relief salt pillows, are present. However, borehole data indicated that 22 m of anhydrite, carbonate, and sandstone are present in one of the welds, indicating that this and other welds may be incomplete. We find that seismic data may be unable to discriminate between a complete and incomplete weld, and we suggested that, during the subsurface analysis of welds, the term apparent weld is used until borehole data unequivocally proves the absence of salt. Furthermore, we speculate that preferential expulsion of halite and potash salt from the autochthonous layer during viscous flow and welding resulted in the formation of an incomplete weld, which, when compared with the initial autochthonous layer, is volumetrically enriched in nonevaporite lithologies and relatively viscous evaporite lithologies (anhydrite). The composition and stratigraphy of the autochthonous layer may thus dictate weld thickness and seal potential.