Geometry Of Watson-Crick Base Pairs Research Articles

Incorporation of inosine into DNA by human polymerase eta (Polη): kinetics of nucleotide misincorporation and structural basis for the mutagenicity.

Inosine, a purine nucleoside containing the hypoxanthine (HX) nucleobase, can form in DNA via hydrolytic deamination of adenine. Due to its structural similarity to guanine and the geometry of Watson-Crick base pairs, inosine can mispair with cytosine upon catalysis by DNA polymerases, leading to AT → GC mutations. Additionally, inosine plays an essential role in purine nucleotide biosynthesis, and inosine triphosphate is present in living cells. In a recent publication, Averill and Jung examined the possibility of polη catalyzed incorporation of deoxyinosine triphosphate (dITP) across dC and dT in a DNA template. They found that dITP can be incorporated across C or T, with the ratio of 13.7. X ray crystallography studies revealed that the mutagenic incorporation of dITP by human polη was affected by several factors including base pair geometry in the active site of the polymerase, tautomerization of nucleobases, and the interaction of the incoming dITP nucleotide with active site residues of polη. This study demonstrates that TLS incorporation of inosine monophosphate (IMP) into growing DNA chains contributes to its mutagenic potential in cells.

New restraints and validation approaches for nucleic acid structures in PDB-REDO.

The quality of macromolecular structure models crucially depends on refinement and validation targets, which optimally describe the expected chemistry. Commonly used software for these two procedures has been designed and developed in a protein-centric manner, resulting in relatively few established features for the refinement and validation of nucleic acid-containing structure models. Here, new nucleic acid-specific approaches implemented in PDB-REDO are described, including a new restraint model using noncovalent geometries (base-pair hydrogen bonding and base-pair stacking) as refinement targets. New validation routines are also presented, including a metric for Watson-Crick base-pair geometry normality (ZbpG). Applying the PDB-REDO pipeline with the new restraint model to the whole Protein Data Bank (PDB) demonstrates an overall positive effect on the quality of nucleic acid-containing structure models. Finally, we discuss examples of improvements in the geometry of specific nucleic acid structures in the PDB. The new PDB-REDO models and pipeline are available at https://pdb-redo.eu/.

Mispairs with Watson‐Crick base‐pair geometry observed in ternary complexes of an RB69 DNA polymerase variant

Recent structures of DNA polymerase complexes with dGMPCPP/dT and dCTP/dA mispairs at the insertion site have shown that they adopt Watson-Crick geometry in the presence of Mn(2+) indicating that the tautomeric or ionization state of the base has changed. To see whether the tautomeric or ionization state of base-pair could be affected by its microenvironment, we determined 10 structures of an RB69 DNA polymerase quadruple mutant with dG/dT or dT/dG mispairs at position n-1 to n-5 of the Primer/Template duplex. Different shapes of the mispairs, including Watson-Crick geometry, have been observed, strongly suggesting that the local environment of base-pairs plays an important role in their tautomeric or ionization states.

Impact of Base Analogues within a CpG Dinucleotide on the Binding of DNA by the Methyl-Binding Domain of MeCP2 and Methylation by DNMT1

The epigenetic control of transcription requires the selective recognition of methylated CpG dinucleotides by methylation-sensitive sequence-specific DNA binding proteins. In order to probe the mechanism of selective interaction of the methyl-binding protein with methylated DNA, we have prepared a series of oligonucleotides containing modified purines and pyrimidines at the recognition site, and we have examined the binding of these oligonucleotides to the methyl-binding domain (MBD) of the methyl-CpG-binding protein 2 (MeCP2). Our results suggest that pyrimidine 5-substituents similar in size to a methyl group facilitate protein binding; however, binding affinity does not correlate with the hydrophobicity of the substituent, and neither the 4-amino group of 5-methylcytosine (mC) nor Watson-Crick base pair geometry is essential for MBD binding. However, 5-substituted uracil analogues in one strand do not direct human DNA methyltransferase 1 (DNMT1) methylation of the opposing strand, as does mC. Important recognition elements do include the guanine O6 and N7 atoms present in the major groove. Unexpectedly, removal of the guanine 2-amino group from the minor groove substantially enhances MBD binding, likely resulting from DNA bending at the substitution site. The enhanced binding of the MBD to oligonucleotides containing several cytosine analogues observed here is better explained by a DNA-protein interface mediated by structured water as opposed to hydrophobic interactions.

Evidence for Watson−Crick and Not Hoogsteen or Wobble Base Pairing in the Selection of Nucleotides for Insertion Opposite Pyrimidines and a Thymine Dimer by Yeast DNA Pol η

We have recently reported that pyrene nucleotide is preferentially inserted opposite an abasic site, the 3'-T of a thymine dimer, and most undamaged bases by yeast DNA polymerase eta (pol eta). Because pyrene is a nonpolar molecule with no H-bonding ability, the unusually high efficiencies of dPMP insertion are ascribed to its superior base stacking ability, and underscore the importance of base stacking in the selection of nucleotides by pol eta. To investigate the role of H-bonding and base pair geometry in the selection of nucleotides by pol eta, we determined the insertion efficiencies of the base-modified nucleotides 2,6-diaminopurine, 2-aminopurine, 6-chloropurine, and inosine which would make a different number of H-bonds with the template base depending on base pair geometry. Watson-Crick base pairing appears to play an important role in the selection of nucleotide analogues for insertion opposite C and T as evidenced by the decrease in the relative insertion efficiencies with a decrease in the number of Watson-Crick H-bonds and an increase in the number of donor-donor and acceptor-acceptor interactions. The selectivity of nucleotide insertion is greater opposite the 5'-T than the 3'-T of the thymine dimer, in accord with previous work suggesting that the 5'-T is held more rigidly than the 3'-T. Furthermore, insertion of A opposite both Ts of the dimer appears to be mediated by Watson-Crick base pairing and not by Hoogsteen base pairing based on the almost identical insertion efficiencies of A and 7-deaza-A, the latter of which lacks H-bonding capability at N7. The relative efficiencies for insertion of nucleotides that can form Watson-Crick base pairs parallel those for the Klenow fragment, whereas the Klenow fragment more strongly discriminates against mismatches, in accord with its greater shape selectivity. These results underscore the importance of H-bonding and Watson-Crick base pair geometry in the selection of nucleotides by both pol eta and the Klenow fragment, and the lesser role of shape selection in insertion by pol eta due to its more open and less constrained active site.

Significance of Nucleobase Shape Complementarity and Hydrogen Bonding in the Formation and Stability of the Closed Polymerase−DNA Complex

DNA polymerases insert a dNTP by a multistep mechanism that involves a conformational rearrangement from an open to a closed ternary complex, a process that positions the incoming dNTP in the proper orientation for phosphodiester bond formation. In this work, the importance and relative contribution of hydrogen-bonding interactions and the geometric shape of the base pair that forms during this process were studied using Escherichia coli DNA polymerase I (Klenow fragment, 3'-exonuclease deficient) and natural dNTPs or non-hydrogen-bonding dNTP analogues. Both the geometric fit of the incoming nucleotide and its ability to form Watson-Crick hydrogen bonds with the template were found to contribute to the stability of the closed ternary complex. Although the formation of a closed complex in the presence of a non-hydrogen-bonding nucleotide analogue could be detected by limited proteolysis analysis, a comparison of the stabilities of the ternary complexes indicated that hydrogen-bonding interactions between the incoming dNTP and the template increase the stability of the complex by 6-20-fold. Any deviation from the Watson-Crick base pair geometry was shown to have a destabilizing effect on the closed complex. This degree of destabilization varied from 3- to 730-fold and was found to be correlated with the size of the mismatched base pair. Finally, a stable closed complex is not formed in the presence of a ddNTP or rNTP. These results are discussed in relation to the steric exclusion model for the nucleotide insertion.

Solution structure of the DNA decamer duplex containing a 3'-T x T basepair of the cis-syn cyclobutane pyrimidine dimer: implication for the mutagenic property of the cis-syn dimer.

The cis - syn dimer is the major DNA photoproduct produced by UV irradiation. In order to determine the origin of the mutagenic property of the cis - syn dimer, we used NMR restraints and molecular dynamics to determine the solution structure of a DNA decamer duplex containing a wobble pair between the 3'-T of the cis - syn dimer and the opposite T residue (CS/TA duplex). The solution structure of the CS/TA duplex revealed that the 3'-T x T base pair of the cis - syn dimer had base pair geometry that was significantly different from the canonical Watson-Crick base pair and caused destabilization and conformational distortion of its 3'-region. However, a 3'-T x A base pair at the cis - syn dimer within this related DNA decamer maintains the normal Watson-Crick base pair geometry and causes little distortion in the conformation of its 3'-side. Our results show that in spite of its stable hydrogen bonding, the insertion of a T residue opposite the 3'-T of the cis - syn dimer is inhibited by structural distortion caused by the 3'-T x T base pair. This may explain why the frequency of the 3'-T-->A transversion, which is the major mutation produced by the cis - syn dimer, is only 4%.

Steady-State and Pre-Steady-State Kinetic Analysis of 8-Oxo-7,8-dihydroguanosine Triphosphate Incorporation and Extension by Replicative and Repair DNA Polymerases

The kinetics of 8-oxo-7,8-dihydroguanosine triphosphate (8-oxo-dGTP) incorporation into DNA by Escherichia coli polymerases I exo- (KF-) and II exo- (Pol II-), HIV-1 RT reverse transcriptase (HIV-1 RT), and bacteriophage T7 exo- (T7(-)) were examined to determine the misincorporation potential for 8-oxo-dGTP and to investigate the role of base pairing symmetry in DNA polymerase fidelity. 8-Oxo-dGTP was found to be a poor substrate for the four polymerases, with insertion efficiencies >10(4)-fold lower than for dGTP incorporation. Insertion efficiencies of 8-oxo-dGTP were also consistently lower than for incorporation of dNTPs opposite template 8-oxo-G, previously studied in this laboratory. In steady-state reactions, T7(-) had a high preference for 8-oxo-dGTP insertion opposite A (97%) and HIV-1 RT, KF-, and Pol II- preferred to insert 8-oxo-dGTP opposite C. Misinsertion frequencies for 8-oxo-dGTP also varied considerably from frequencies of misinsertion at template 8-oxo-G adducts for Pol II-, HIV-1 RT, and T7(-). Pre-steady-state incorporation of 8-oxo-dGTP opposite C (but not opposite A) by HIV-1 RT, KF-, and Pol II- displayed biphasic curves, with rates of initial incorporation 2- to 11-fold lower than normal dGTP incorporation. Although extension past template 8-oxo-G adducts had previously been shown to occur preferentially for the mispair, extension past primer 8-oxo-G:template A or C pairs was variable. The low and comparable estimated Kd values for dGTP and 8-oxo-dGTP binding to HIV-1 RT alone or HIV-1 RT.DNA complexes indicated that the initial binding was nonselective and had high affinity. The large difference (>3 orders of magnitude) in kinetic Kdapp values for 8-oxo-dGTP and dGTP binding to HIV-1 RT.DNA indicates that there are contributions to the kinetically determined Kdapp (such as conformational change and/or phosphodiester bond formation) which may be involved in the selection against 8-oxo-dGTP. The differences in binding (Kdapp), incorporation, and extension kinetics of 8-oxo-dGTP compared to normal dNTP incorporation at template 8-oxo-G adducts indicate that polymerase fidelity does not depend solely upon the overall geometry of Watson-Crick base pairs and reflects the asymmetry of the enzyme active site.

Conformational coupling in DNA polymerase fidelity.

The fidelity of DNA polymerases is largely attributable to a two-step nucleotide binding mechanism. In the first step, binding contacts are initially made between the template and the incoming dNTP. The selectivity of this ground-state binding is similar in magnitude to the selectivity seen in forming base pairs in solution. In the second step, a change in protein conformation occurs, which leads to rapid incorporation of the dNTP into the growing polymer. This conformational change appears to occur globally in that it is inhibited by mismatches in the dNTP or in any of the three terminal base pairs of the primer/template. The open conformation allows rapid binding of the dNTP from solution, while the closed conformation provides steric checks for the proper Watson-Crick base pair geometry. This conformational change accounts for the extraordinary fidelity of polymerization and also provides selectivity to the exonuclease by inhibiting polymerization over a mismatch in the primer/template. The overall fidelity approaches one error in 10(10) by a combination of selectivity in polymerization (10(5)-10(6)) and in proofreading (10(3)-10(4)). This paradigm provides the theoretical basis for further investigation of the structural basis for fidelity by pointing to the essential elements of the polymerization reaction that need to be examined in order to evaluate active-site-directed mutants of polymerases to test appropriate structure/function relationships.

The Stereochemical Basis of Template Function

The behavior of nucelotides with thioketo-substituted pyrimidine bases (4-thiouracil, 2-thiouracil and 2-thiocytosine) or amino-analogue purine bases (2-aminopurine and 2,6-diaminopurine) in transcription and translation was investigated. The experimental results obtained led to the following conclusions. 1. The stereochemical basis of substrate selection in transcription is the geometry of Watson-Crick base pairs A-U (or A-T) and G-C between substrate and template bases. 2. The topology of the active site of Escherichia coli RNA polymerase is precisely adopted to the geometry of Watson-Crick base pairs. 3. The enzyme active site discriminates between A-U (A-T) and G-C base pairs. An essential feature in this discrimination is the 6-NH2 group of the A-U (A-T) base pair and the 2-keto group of cytosine in the G-C base pair. 4. The codon properties of a nucleic acid base in messenger RNA can be predicted on the basis of its specificity in polynucleotide interactions. There seems to be no evidence for the participation of protein topological sites in the control of the specificity of codon-anticodon interactions in translation.