Alkaline Phosphatase Gene Expression Research Articles

Effect of lactoferrin and its digests on differentiation activities of bone mesenchymal stem cells

Many studies of lactoferrin (LF) effect on bone mesenchymal stem cells (BMSCs) have been reported. However, there has been no reported work on the role of lactoferrin digests. In present study, we show that LF and especially its digests, can increase proliferation, cell cycle, and inhibit apoptosis to BMSCs. Trypsin digests were most effective, followed by pepsin digests and then samples digested with both enzymes. Osteogenic differentiation was evaluated by alkaline phosphatase (ALP) activity assay, calcium deposition, gene and protein expression of collagen I (Col I), osteocalcin (OCN), bone morphogenetic protein 2 (BMP2), and runt-related transcription factor 2 (Runx2). While adipogenic differentiation was evaluated by lipid deposition and gene and protein expression of peroxisome proliferator activated receptor (PPARγ). LF and especially its digests, enhanced osteogenic differentiation and reduced adipogenic differentiation. These findings indicate that LF and particularly its digests are potential bioactive food supplements that could promote BMSCs capacity.

Graphene Oxide Foils as an Osteoinductive Stem Cell Substrate.

The hydrophilic graphene derivative, graphene oxide (GO), is used to synthesize free-standing GO foils characterized by cross-linked GO sheets with enhanced mechanical properties and no tendency to release GO flakes in aqueous solution. These GO foils do not evidence cytotoxic effects toward dental pulp stem cells (DPSC). Rather, DPSC viability is significantly increased for cells grown on GO foil and SEM analyses evidence the synthesis of a consistent extracellular matrix by DPSCs with respect to cells grown on polystyrene. Gene expression of osteogenic markers and alkaline phosphatase (ALP) activity tests demonstrate DPSC differentiation toward the osteoblastic lineage. Indeed RUNX2, a key transcriptor factor associated with osteogenic differentiation, as well as SP7, responsible for triggering bone matrix mineralization, are significantly augmented after 7 and 14 days of culture on GO foil with respect to the control, respectively, underlying the capability of GO foil to promote a potential faster and better DPSC differentiation with respect to cells grown on polystyrene. This increase of rate differentiation is confirmed by SEM analyses of DPSCs evidencing a consistent extracellular matrix synthesis at the earliest time of culture (i.e., 3 and 14 days).

Influence of mechanical fluid shear stress on the osteogenic differentiation protocols for Equine adipose tissue-derived mesenchymal stem cells

Cell-based therapies have become a promising approach to promote tissue regeneration and the treatment of musculoskeletal disorders. Bone regeneration maintains bone homeostasis, mechanical stability and physical performance. Mechanical stimulation showed to induce stem cell differentiation into the osteogenic fate. However, the effect of various osteogenic protocols on the osteogenic commitment of equine adipose-derived stem cells is not fully elucidated. Here we examined the influence of fluid-based shear stress (FSS) via mechanical rocking to assess whether mechanical stimulation promotes osteogenic differentiation of equine adipose-derived stem cells (ASCs). ASCs were induced into osteogenic fate using osteogenic differentiation medium (ODM) protocol or additional supplementation of 5 mM CaCl2 and 7.5 mM CaCl2 protocol compared to cells cultivated in basal medium (BM) up to 21 day. The ASCs proliferation pattern was evaluated using the sulforhodamine B (SRB) protein assay. Osteogenic differentiation examined via semi-quantification of alizarin red staining (ARS) and alkaline phosphatase activity (ALP) as well as, via quantification of osteocalcin (OC), alkaline phosphatase (ALP), osteopontin (OP), and collagen type-1 (COL1) gene expression using RT-qPCR. We show that mechanical FSS increased the proliferation pattern of ASCs compared to the static conditions. Mechanical FSS together with 5 mM CaCl2 and 7.5 mM CaCl2 promoted osteogenic nodule formation and increased ARS intensity compared to the standard osteogenic protocols. We observed that combined mechanical FSS with ODM protocol increase ALP activity compared to static culture conditions. We report that ALP and OC osteogenic markers expression were upregulated under mechanical FSS culture condition particularly with the ODM protocol. Taken together, it can be assumed that mechanical stress using FSS promotes the efficiency of the osteogenic differentiation protocols of ASCs through independent mechanisms.

In vitro osteogenic differentiation of stem cells with different sources on composite scaffold containing natural bioceramic and polycaprolactone

Stem cells can be obtained from a variety of sources. To compare the effect of cell source on the osteogenic differentiation potential, buccal fat pad-derived mesenchymal stem cells (BFP-MSCs), bone marrow-derived MSCs (BM-MSCs) and unrestricted somatic stem cells (USSCs) with different accessibility in time and region, were cultured on bioceramic (Bio-Oss®) coated electrospun polycaprolactone (PCL) scaffold (PCL-Bio). After scaffold characterization, stem cells proliferation and osteogenic differentiation were investigated by MTT and Alizarin red staining, alkaline phosphatase activity, calcium content and gene expression assays. Proliferation rate of the stem cells was not significantly different with each other, only USSCs showed significantly lower proliferation rate while cultured on PCL-Bio; although, PCL-Bio showed better proliferation support in comparison with tissue culture plate and PCL. Mineralization of the BM-MSCs was significantly higher than others, while BFP-MSCs were close to it. Highest ALP activity was detected in BFP-MSCs cultured on PCL-Bio. USSCs demonstrated higher gene expression level in three genes, although differences were not huge compared to others. According to the results and due to the availability, facilitated preparation procedure and less patients suffering, BFP-MSCs have a better choice than BM-MSCs and USSCs for use in bone tissue engineering.

Melatonin: Another avenue for treating osteoporosis?

Melatonin is a signal molecule that modulates the biological circadian rhythms of vertebrates. Melatonin deficiency is thought to be associated with several disorders, including insomnia, cancer, and cardiovascular and neurodegenerative diseases. Accumulating evidence has also indicated that melatonin may be involved in the homeostasis of bone metabolism. Age-related reductions in melatonin are considered to be critical factors in bone loss and osteoporosis with aging. Thus, serum melatonin levels might serve as a biomarker for the early detection and prevention of osteoporosis. Compared to conventional antiosteoporosis medicines, which primarily inhibit bone loss, melatonin both suppresses bone loss and promotes new bone formation. Mechanistically, by activating melatonin receptor 2 (MT2), melatonin upregulates the gene expression of alkaline phosphatase (ALP), bone morphogenetic protein 2 (BMP2), BMP6, osteocalcin, and osteoprotegerin to promote osteogenesis while inhibiting the receptor activator of NF-kB ligand (RANKL) pathway to suppress osteolysis. In view of the distinct actions of melatonin on bone metabolism, we hypothesize that melatonin may be a novel remedy for the prevention and clinical treatment of osteoporosis.

Heparin is biocompatible and can induce differentiation of human dental pulp cells.

To investigate the biocompatibility, osteogenic bioactivity and mRNA expression of the osteo/odontogenic markers bone morphogenetic protein 2 (BMP-2), osteocalcin (OC) and alkaline phosphatase (ALP), induced by heparin in human dental pulp cells (hDPCs). hDPCs were exposed to the heparin, and cell viability was assessed by 3-(4,5-dimethylthiazol)-2,5-diphenyltetrazolium bromide (MTT), and cell death was evaluated by flow cytometry. Osteogenic bioactivity was evaluated by the alkaline phosphatase (ALP) assay, and the detection of calcium deposits by alizarin red staining (ARS). The gene expression of BMP-2, OC and ALP was quantified with real-time PCR. Statistical analysis was performed with ANOVA and Bonferroni or Tukey post-test and t-test (α=0.05). Heparin had no cytotoxic effect and did not induce apoptosis. After 3days, heparin had significantly higher ALP activity in comparison with the control (P<0.05). Heparin had a significant (P<0.05) stimulatory effect on the formation of mineralized nodules. BMP-2 and OC mRNA expressions were significantly higher in cells exposed to heparin than control group after 1day (P<0.05). Heparin was biocompatible in hDPCs, induced osteogenic bioactivity and enhanced mRNA expression of osteo/odontogenic markers BMP-2 and OC. These results suggest that heparin has potential to induce osteo/odontogenic cell differentiation of hDPCs.

Augmentation of DMLS Biomimetic Dental Implants with Weight-Bearing Strut to Balance of Biologic and Mechanical Demands: From Bench to Animal.

A mismatch of elastic modulus values could result in undesirable bone resorption around the dental implant. The objective of this study was to optimize direct metal laser sintering (DMLS)-manufactured Ti6Al4V dental implants’ design, minimize elastic mismatch, allow for maximal bone ingrowth, and improve long-term fixation of the implant. In this study, DMLS dental implants with different morphological characteristics were fabricated. Three-point bending, torsional, and stability tests were performed to compare the mechanical properties of different designs. Improvement of the weaker design was attempted by augmentation with a longitudinal 3D-printed strut. The osseointegrative properties were evaluated. The results showed that the increase in porosity decreased the mechanical properties, while augmentation with a longitudinal weight-bearing strut can improve mechanical strength. Maximal alkaline phosphatase gene expression of MG63 cells attained on 60% porosity Ti6Al4V discs. In vivo experiments showed good incorporation of bone into the porous scaffolds of the DMLS dental implant, resulting in a higher pull-out strength. In summary, we introduced a new design concept by augmenting the implant with a longitudinal weight-bearing strut to achieve the ideal combination of high strength and low elastic modulus; our results showed that there is a chance to reach the balance of both biologic and mechanical demands.

Development of dual delivery antituberculotic system containing rifapentine microspheres and adipose stem cells seeded in hydroxyapatite/tricalcium phosphate.

BackgroundLow drug concentration in the tuberculosis (TB) lesion and bone defects or nonunion after debridement are two major problems that occur in the course of treating osteo-articular TB. Thus, the combination of drug-delivery system and bone tissue repair appears to be the most promising option for osteoarticular TB treatment.Materials and methodsHerein, we report a novel anti-TB dual delivery system based on rifapentine polylactic acid microspheres (RPMs) to treat infections, with the addition of adipose-derived mesenchymal stem cells (ASCs) seeded in hydroxyapatite/tricalcium phosphate (HA/TCP) to promote bone formation. Cell proliferation, osteogenesis, and apoptosis were performed to investigate the effects of rifapentine on ASCs. The RPMs were synthesized by emulsion-solvent evaporation method, and then the monolayer composite (ASC + RPM) and three-dimensional (3D) composite scaffold (ASC + RPM + HA/TCP) were constructed, respectively. The alkaline phosphatase (ALP) activity and real-time PCR were used for determining the osteogenic differentiation. The concentrations of rifapentine resulting from the composites were detected.ResultsThe results showed that rifapentine has no influence on ASCs proliferation and osteogenesis when the drug concentration was below 20 µg/mL, which was significantly higher than minimal inhibitory concentration. The drug loading and encapsulation efficiency of RPMs were 40.56%±2.63% and 70.24%±2.18%, respectively. The proliferation of the cells in monolayer was higher than that in 3D composite, and the addition of RPMs slightly increased the proliferation. The ALP activity and gene expression of osteocalcin and osteopontin were higher in the 3D composite than those in the monolayer. Good biocompatibility was observed by microscopic image and H&E stain. The release tests revealed that the 3D composite exhibited sustained release profiles of rifapentine for 76 days. The dual delivery systems in 3D composite could moderate the burst release and extend the length of release time when compared to single delivery in monolayers.ConclusionIn conclusion, such dual delivery antituberculotic scaffold represents a potential new strategy for TB infections and bone defects.

The potential application of concentrated growth factor in regenerative endodontics.

To investigate the potential application of concentrated growth factor (CGF) to promote pulp regeneration within immature teeth. Concentrated growth factor clots produced from peripheral blood samples were investigated histologically by haematoxylin-eosin (HE) staining and evaluated morphologically by scanning electron microscope (SEM). The cytokines were extracted from the CGF, and representative cytokines were quantified by enzyme-linked immunosorbent assay (ELISA). The biological effects of the CGF on human stem cells from the apical papilla (SCAPs) were then investigated and quantified, including cell proliferation, cell migration, mineralized nodule formation, and the gene expression of alkaline phosphatase (ALP), dentine sialophosphoprotein (DSPP) and dentine matrix protein (DMP)-1. The results were analysed statistically using one-way analysis of variance (anova). Concentrated growth factor had a complex three-dimensional structure with a high density of platelets and nucleated cells. Representative growth factors including PDGF-BB, IGF-1, TGF-β1, bFGF and VEGF were detected. The growth rate and migratory cell numbers of the CGF groups were significantly greater than those in the control groups (P<0.05). The mineralization areas in the CGF groups were significantly larger than those in the control groups (P<0.05). The expression levels of ALP, DSPP and DMP-1 were significantly up-regulated after induction by CGF (P<0.05). Concentrated growth factor promoted the proliferation, migration and differentiation of SCAPs and could be a promising biomaterial applied in regenerative endodontics.

A laminin-derived functional peptide, PPFEGCIWN, promotes bone formation on sandblasted, large-grit, acid-etched titanium implant surfaces.

This study aimed to investigate the in vitro and in vivo bone-forming potential of a sandblasted, large-grit, acid-etched (SLA) titanium (Ti) surface treated with a laminin-derived functional peptide, PPFEGCIWN (DN3). Human osteoblast-like MG63 cells were cultured with SLA Ti discs untreated or treated with DN3 or a control scrambled peptide (SP). Cell adhesion, spreading, and viability on the discs were tested. Alkaline phosphatase gene expression and enzyme activity were also evaluated. Four DN3-coated SLA Ti implants and four untreated implants were placed into the tibiae of two rabbits (two implants/tibia). Ten days later, the bone-implant interfaces were subjected to histomorphometry to measure the bone response. The surface properties of the discs and implants were determined using scanning electron, widefield confocal, and confocal laser microscopy and x-ray photoelectron spectroscopy. The peptide-treated and untreated discs and implants were similar in terms of physical surface properties, but the peptide-treated surfaces had significantly higher nitrogen levels (P < .05). The DN3 peptide promoted cell adhesion, spreading, and alkaline phosphatase expression and enzyme activity (P < .05). Histomorphometry of the harvested implants showed rapid bone formation and affinity of the motif. This study suggests that treatment with the cell adhesion peptide DN3 promotes bone healing at the SLA Ti surface.

Efficiency of coculture with angiogenic cells or physiological BMP-2 administration on improving osteogenic differentiation and bone formation of MSCs.

Cell-based bone regeneration with mesenchymal stem cells (MSCs) represents the current challenge toward repair of bone defects and fractures. The supposed hurdles for satisfactory performance of cell-based constructs include inadequate vascularization and osteogenic signals. Considering the reported beneficial role of angiogenic cells in promoting vascularization and osteogenic differentiation and the osteogenic potential of bone morphogenetic protein 2 (BMP-2), we here evaluated the efficiency of coculture with angiogenic cells or a physiological dose of BMP-2 on improving osteogenic differentiation of MSCs and bone formation in vivo. In three dimensional (3D) collagen hydrogels in vitro, cocultured human umbilical vein endothelial cells (HUVECs) in a 1:1 ratio or with a physiological dose of BMP-2 (2 ng/μL) promoted the osteogenic potential of MSCs evidenced by enhanced alkaline phosphatase activity and gene expression of osteogenic markers. Notably, HUVECs evoked similar osteogenic stimulation as BMP-2, albeit in a delayed manner. When their bone formation capacity was further evaluated in a mouse subcutaneous implantation model, MSCs with BMP-2 demonstrated the highest efficiency with reproducible bone formation. In contrast, MSCs cocultured with HUVECs constructs displayed substantial blood vessel-like structures with fibrous tissue rather than ectopic bone as MSC monoculture controls. Our findings confirm the priority of generating cell-based bone constructs with physiological BMP-2 administration and indicate the potential of using angiogenic cells to develop vascularized constructs. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 643-653, 2019.

Novel metformin-containing resin promotes odontogenic differentiation and mineral synthesis of dental pulp stem cells

This represents the first report on the development of metformin-containing dental resins. The objectives were to use the resin as a carrier to deliver metformin locally to stimulate dental cells for dental tissue regeneration and to investigate the effects on odontogenic differentiation of dental pulp stem cells (DPSCs) and mineral synthesis. Metformin was incorporated into a resin at 20% by mass as a model system. DPSC proliferation attaching on resins was evaluated. Dentin sialophosphoprotein (DSPP), dentin matrix phosphoprotein 1 (DMP-1), alkaline phosphatase (ALP), and runt-related transcription factor 2 (Runx2) genes expressions were measured. ALP activity and alizarin red staining (ARS) of mineral synthesis by the DPSCs on resins were determined. DPSCs on metformin-containing resin proliferated well (mean ± SD; n = 6), and the number of cells increased by 4-fold from 1 to 14days (p > 0.1). DSPP, ALP, and DMP-1 gene expressions of DPSCs on metformin resin were much higher than DPSCs on control resin without metformin (p < 0.05). ALP activity of metformin group was 70% higher than that without metformin at 14days (p < 0.05). Mineral synthesis by DPSCs on metformin-containing resin at 21days was 9-fold that without metformin (p < 0.05). A novel metformin-containing resin was developed, achieving substantial enhancement of odontoblastic differentiation of DPSCs and greater mineral synthesis. The metformin resin is promising for deep cavities and perforated cavities to stimulate DPSCs for tertiary dentin formation, for tooth root coatings with metformin release for periodontal regeneration, and for root canal fillings with apical lesions to stimulate bone regeneration.

GuttaFlow Bioseal promotes spontaneous differentiation of human periodontal ligament stem cells into cementoblast-like cells

ObjectivesTo evaluate in vitro the cementogenic potential and the biological effects of GuttaFlow Bioseal, GuttaFlow 2, MTA Fillapex and AH Plus on human periodontal ligament stem cells (hPDLSCs). MethodsCell viability, cell migration and cell morphology assays were performed using eluates of each material. To evaluate cell attachment, hPDLSCs were directly seeded onto the material surfaces and analyzed by scanning electron microscopy (SEM). The effects of endodontic sealers on cementum protein 1 (CEMP1), cementum-derived attachment protein (CAP), bone sialoprotein (BSP), ameloblastin (AMBN), amelogenin (AMELX) and alkaline phosphatase (ALP) gene expression on hPDLSCs were investigated by qPCR and immunofluorescence (IF). Statistical analysis was performed with analysis of variance and Bonferroni or Tukey post-test (α<0.05). ResultsMore than 90% of viable cells were obtained using extracts of GuttaFlow Bioseal and GuttaFlow2 after 72h of culture. By contrast, AH Plus and MTA Fillapex induced significantly lower levels of cell viability. GuttaFlow2 and GuttaFlow Bioseal promoted wound closure in a concentration-dependent manner, comparable to that observed with control extracts (*p<0.05). However, with AH Plus and MTA Fillapex, cell migration was significantly lower than in the control (***p<0.0001). SEM analysis pointed to an organized stress fiber assembly and high degree of cell adhesion on GuttaFlow Bioseal disks but low rates on GuttaFlow2, MTA Fillapex and AH Plus. When hPDLSCs were cultured with GuttaFlow Bioseal-conditioned media, qPCR assays and IF showed a higher level of AMELX, AMBN, CEMP1 and CAP expression than the control (*p<0.05)), whereas no such expression was observed in the other sealers. SignificanceOur results showed that GuttaFlow sealers were more cytocompatible than AH Plus and MTA Fillapex, while GuttaFlow Bioseal favored cementoblast differentiation of hPDLSCs in the absence of any growth factors.

Regulation of osteoblasts by alkaline phosphatase in ankylosing spondylitis.

Ankylosing spondylitis (AS) is characterized by excessive spinal ankylosis and bone formation. Alkaline phosphatase (ALP) activity is reported to be high in AS, but little is known about the molecular relationship between ALP and AS. The aims of this study were to investigate the relevance of ALP to AS and the role of ALP in the regulation of osteoblast differentiation in AS. High-throughput data with accession numbers GSE73754 and GSE41038 were downloaded from the Gene Expression Omnibus. We retrospectively collected and compared the ALP levels of male patients with AS to those of sex- and age-matched healthy controls (HC) and rheumatoid arthritis (RA) patients. Total serum ALP and ALP activity were measured in the AS and RA groups. ALP gene expression and intracellular ALP activity were analyzed in microarray data from primary diseases control (Ct) and AS-bone-derived cells (BdCs) and in vitro experiments. Furthermore, the effect of ALP inhibitor was examined in both primary Ct- and AS-BdCs under osteoblast differentiation. Regulation of runt-related transcription factor 2 (RUNX2) by ALP was also analyzed. Alkaline phosphatase level was higher in AS compared with RA and HC and was associated with radiograph progression. ALP expression was also enriched in the bone tissue of AS patients. Furthermore, AS-BdCs exhibited increasing ALP activity, leading to accelerated osteoblastic activity and differentiation. Intriguingly, inhibition of ALP reduced RUNX2 expression, a master transcriptional factor in osteoblasts, and differentiation status of both primary Ct- and AS-BdCs. Treatment of ALP activator or inhibitor modulated RUNX2 protein level and RUNX2 regulated ALP promoter activity, indicating a reciprocal ALP-RUNX2 positive feedback to regulate osteoblast differentiation. Alkaline phosphatase was highly expressed in AS patients, may be involved in the ankylosis of AS, and represents a possible therapeutic target for ankylosis.

Activation of local bone RAS by maternal excessive glucocorticoid participated in the fetal programing of adult osteopenia induced by prenatal caffeine exposure

This study was aimed to investigate whether and how prenatal caffeine exposure (PCE) could induce osteopenia in the adult offspring. Pregnant rats were treated with prenatal caffeine 12 mg/100 g body weight per day from pregnant day 9 to 20, while rat bone marrow mesenchymal stem cells (BMSCs) were treated with exogenous corticosterone during osteogenic induction. Shorter femur and primary ossification center was observed in the PCE offspring, as well as less bone trabecular and poor biomechanical intensity. Local gene expression of glucocorticoid receptor (GR) and angiotensin converting enzyme (ACE), as well as angiotensin 2 content, was found to be stimulated, while the expression of bone gamma-carboxyglutamate protein (BGLAP), alkaline phosphatase (ALP) and bone sialoprotein (BSP) was found to be suppressed, with hypomethylation of ACE promoter. Corticosterone (1250 nM) suppressed osteogenic differentiation of BMSCs and gene expression of BGLAP, ALP and BSP, which was attenuated by enalapril, while it stimulated ACE mRNA expression and induced hypomethylation of ACE promoter, which was attenuated by mifepristone. It indicated that PCE caused bone growth retardation and adult osteopenia in offspring, which might be triggered by the activation of local RAS induced by excessive maternal glucocorticoid, while the hypomethylation of ACE gene might be the key point of the sustained activation of the local RAS.

Upregulation of miR-210 promotes differentiation of mesenchymal stem cells (MSCs) into osteoblasts.

Numerous studies indicated that microRNAs are critical in the regulation of cellular differentiation, by controlling the expression of underlying genes. The aim of this study was to investigate the effect of miR-210 upregulation on differentiation of human umbilical cord blood (HUCB)-derived mesenchymal stem cells (MSCs) into osteoblasts. MSCs were isolated from HUCB and confirmed by their adipogenic/osteogenic differentiation and flow cytometric analysis of surface markers. Pre-miR-210 was amplified from human DNA, digested and ligated with plenti-III-mir-green fluorescent protein (GFP) vector, and cloned in STBL4 bacteria. After confirmation with polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP), the plenti-III-GFP segment bearing pre-miR-210 was transfected into MSCs by electroporation. Two control vectors, pmaxGFP and Scramble, were transfected separately into MSCs. The expression of miR-210 and genes related to osteoblast differentiation, i.e., runt-related transcription factor 2 (Runx2), alkaline phosphatase (ALP) and osteocalcin gene, in the three groups of transfected MSCs was analyzed 0, 7, 14, and 21 days of transfection by quantitative reverse transcription PCR (qRT-PCR). Overexpression of miR-210 was observed in MSCs transfected with miR-210-bearing plasmid, and this was significantly different compared to Scramble group (p < 0.05). Significantly increased expression of Runx2 (at day 7 and 14), ALP and osteocalcin genes (at all time points for both genes) was observed in MSCs with miR-210-bearing plasmid compared to controls. Overall, the overexpression of miR-210 in MSCs led to MSC differentiation into osteoblasts, most probably by upregulating the Runx2, ALP, and osteocalcin genes at different stages of cell differentiation. Our study confirms the potential of miRNAs in developing novel therapeutic strategies that could target regulatory mechanisms of cellular differentiation in various disease states.

Promoting osteogenic differentiation of human‐induced pluripotent stem cells by releasing Wnt/β‐catenin signaling activator from the nanofibers

Implants that can enhance the stem cells differentiation in the absence of the chemical osteogenic growth factors will attract the great interest of orthopedic scientists. Inorganic polyphosphate (poly-P), as a ubiquitous biological polymer, is one of the factors that can be an alternative for osteogenic growth factors via activating Wnt/β-catenin signaling. In this study, poly-P was incorporated at the blend of polycaprolactone (PCL)/poly (l-lactic acid) (PLLA) electrospun nanofibers and then osteogenic differentiation potential of human-induced pluripotent stem cells (iPSCs) was investigated by the important bone markers. 3-[4, 5-dimethylthiazol-2-yl]-2, 5 diphenyl tetrazolium bromide (MTT) and scanning electron microscopy results confirmed the biocompatibility of the fabricated nanofibers, while higher proliferation rate of iPSCs was detected in PCL-PLLA(poly-P) group compared with the PCL-PLLA and tissue culture plate groups. Alkaline phosphatase activity, calcium content, and gene expression results demonstrated that osteogenic differentiation of iPSCs was increased when cultured on PCL-PLLA(poly-P) in comparison with other groups. According to the results, PCL-PLLA(poly-P) could be considered as a promising candidate for use as bone implants.

A qPCR method to quantify bioavailable phosphorus using indigenous aquatic species

BackgroundBioavailable phosphorus (BAP) represents the sum of phosphorus that is readily available for algae growth and is useful to indicate the severity of eutrophication in aquatic environments.ResultsHere, a quantitative real-time PCR (qPCR)-based bioassay was developed to quantify BAP using the indigenous cyanobacterium species Anabaena sp. of Lake Tai, a large and shallow eutrophic lake in the Yangtze Valley, China. Primers were designed to quantify the gene expression of alkaline phosphatase (phoA/phoA-like) and phosphate transporter (pst1) genes of Anabaena. The specificity and efficiency of the primer sets were evaluated by gel electrophoresis and real-time PCR. The results showed that the primers developed here could successfully be used to measure BAP in the water. The linear range of BAP measurements by the pst1 gene after 2 h incubation was 0.125–2.00 mg/L. Then, the qPCR-based bioassay was applied to analyze water samples from Tai Lake, which had BAP levels in the range of 0.239–0.459 mg/L.ConclusionsThe qPCR-based bioassay represents a promising biomonitoring tool that can quantify phosphorus bioavailability in aquatic environments.

Study on cytotoxicity of three-dimensional printed β-tricalcium phosphate loaded poly (lactide-co-glycolide) anti-tuberculosis drug sustained release microspheres and its effect on osteogenic differentiation of bone marrow mesenchymal stem cells

To study the effect of three-dimensional (3D) printed β-tricalcium phosphate (β-TCP) scaffold loaded poly (lactide-co-glycolide) (PLGA) anti-tuberculosis drug sustained release microspheres on osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) and its cytotoxicity. Isoniazid and rifampicin/PLGA sustained release microspheres were prepared by W/O/W multiple emulsion method. The β-TCP scaffolds were prepared by 3D printing technique. The microspheres were loaded on the scaffolds by centrifugal oscillation method to prepare composite materials. The BMSCs of Sprague Dawley rat were isolated and cultured by whole bone marrow adherent method, and the third generation cells were used for the following experiments. BMSCs were co-cultured with osteogenic induction medium (group A), PLGA anti-tuberculosis drug sustained release microsphere extract (group B), 3D printed β-TCP scaffold extract (group C), and 3D printed β-TCP scaffold loaded PLGA anti-tuberculosis drug sustained release microsphere composite extract (group D), respectively. Cytotoxicity was detected by cell counting kit 8 (CCK-8) method; the calcium deposition was observed by alizarin red staining; and the mRNA expressions of alkaline phosphatase (ALP), osteocalcin (OCN), and bone sialoprotein (BSP) were detected by real-time fluorescence quantitative PCR (RT-qPCR). CCK-8 assay showed that the absorbance ( A) value of groups A, B, C, and D increased gradually with the culture time prolonging. After cultured for 24, 48, and 72 hours, the A value decreased in the order of groups A, C, B, and D. There was no significant difference between groups B and D ( P>0.05), but there were significant differences between other groups ( P<0.05). The cytotoxicity was evaluated as grade 0-2, and the toxicity test was qualified. Alizarin red staining showed that red mineralized nodules were formed in all groups at 21 days after osteogenic induction, but the number of mineralized nodules decreased sequentially in groups C, D, A, and B. RT-qPCR test results showed that the relative expressions of OCN and BSP genes in groups A, B, C, and D increased gradually with the culture time prolonging. The relative expression of ALP gene increased at 7 and 14 days, and decreased at 21 days. After cultured for 7, 14, and 21 days, the relative expressions of ALP, OCN, and BSP genes decreased sequentially in groups C, D, A, and B; the differences were significant between groups at different time points ( P<0.05). 3D printed β-TCP loaded PLGA anti-tuberculosis drug sustained release microsphere composites have no obvious cytotoxicity to BMSCs, and can promote BMSCs to differentiate into osteoblasts to a certain extent.

Enhanced mechanical and osteogenic differentiation performance of hydroxyapatite/zein composite for bone tissue engineering

Herein, a series of hydroxyapatite (HAp)/zein biocomposite membranes, with different inorganic/organic weight ratios, are fabricated by solvent casting method by using ultra-long hydroxyapatite nanowires as the reinforcement. The FTIR spectra and XRD analysis of HAp/zein composite membrane confirm the structure of HAp nanowires and zein in composite membranes. When the HAp nanowires content increased from 50 to 90 wt%, the morphology of HAp/zein composite membrane transformed from the rough plane into the fibrous and porous structure, both Young’s modulus and tensile strength exhibited about 40% of the increase, and the water absorption showed about 80% of improvement. Moreover, higher content of HAp nanowires improved the adhesion, proliferation and osteogenic differentiation of mouse bone marrow mesenchymal stem cells according to the examination of 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay, alkaline phosphatase activity, calcium deposition and gene expression. The prepared HAp/zein 9/1 composite membrane is shown as a promising candidate for the bone repair and regeneration applications.