Gelatin Methacrylamide Research Articles

Enhancing vaginal reconstruction through 3D bioprinted scaffolds using a novel vECM-GelMA-SF bioink.

Overcoming the low cell survival rates and insufficient neovascularization associated with tissue engineering of the vagina is crucial for advancing the vaginal reconstruction. In this research, we have developed a unique bioink composed of porcine vaginal extracellular matrix (vECM), gelatin methacrylamide (GelMA), and silk fibroin (SF) to facilitate the bioprinting of a vaginal scaffold. The vECM-GelMA-SF bioink effectively replicates the in vivo microenvironment, supporting the in vitro cultivation of 3D bioprinted vaginal scaffolds. It promotes stem cell viability and enhances neovascularization by harnessing the mechanical properties of GelMA/SF and the tissue specificity of vECM. In vivo orthotopic studies have demonstrated that the use of 3D bioprinted vaginal scaffolds significantly improves the functionality of reconstructed vaginas, promoting angiogenesis, rapid epithelialization, muscle regeneration, glycogen secretion, and nerve repair. The reconstructed vaginal tissues in the 3D cell-loaded scaffold group closely resemble natural vaginal tissues. Differential proteomics analysis has provided insights into the genetic functions and biological pathways involved in vaginal reconstruction. Our study successfully optimized the composition of the vECM-GelMA-SF bioink, achieving a balance between biocompatibility and printability. This bioink is suitable for constructing 3D bioprinted vaginal scaffolds of various dimensions, transplantable in situ in animal models with different degrees of vaginal absence. The bioink may find applications in clinical settings, improving the overall effectiveness and safety of in vivo vaginal reconstruction procedures.

High-throughput fabrication of cell spheroids with 3D acoustic assembly devices.

Acoustic cell assembly devices are applied in cell spheroid fabrication attributed to their rapid, label-free and low-cell damage production of size-uniform spheroids. However, the spheroids yield and production efficiency are still insufficient to meet the requirements of several biomedical applications, especially those that require large quantities of cell spheroids, such as high-throughput screening, macro-scale tissue fabrication, and tissue repair. Here, we developed a novel 3D acoustic cell assembly device combined with a gelatin methacrylamide (GelMA) hydrogels for the high-throughput fabrication of cell spheroids. The acoustic device employs three orthogonal piezoelectric transducers that can generate three orthogonal standing bulk acoustic waves to create a 3D dot-array (25 × 25 × 22) of levitated acoustic nodes, enabling large-scale fabrication of cell aggregates (>13,000 per operation). The GelMA hydrogel serves as a supporting scaffold to preserve the structure of cell aggregates after the withdrawal of acoustic fields. As a result, mostly cell aggregates (>90%) mature into spheroids maintaining good cell viability. We further applied these acoustically assembled spheroids to drug testing to explore their potency in drug response. In conclusion, this 3D acoustic cell assembly device may pave the way for the scale-up fabrication of cell spheroids or even organoids, to enable flexible application in various biomedical applications, such as high-throughput screening, disease modeling, tissue engineering, and regenerative medicine.

Temperature-responsive hydrogel-grafted vessel-on-a-chip: Exploring cold-induced endothelial injury.

Cold-induced vasoconstriction is a significant contributor that leads to chilblains and hypothermia in humans. However, current animal models have limitations in replicating cold-induced acral injury due to their low sensitivity to cold. Moreover, existing in vitro vascular chips composed of endothelial cells and perfusion systems lack temperature responsiveness, failing to simulate the vasoconstriction observed under cold stress. This study presents a novel approach where a microfluidic bioreactor of vessel-on-a-chip was developed by grafting the inner microchannel surface of polydimethylsiloxane with a thermosensitive hydrogel skin composed of N-isopropyl acrylamide and gelatin methacrylamide. With a lower critical solution temperatureset at 30°C, the gel layer exhibited swelling at low temperatures, reducing the flow rate inside the channel by 10% when the temperature dropped from 37°C to 4°C. This well mimicked the blood stasis observed in capillary vessels in vivo. The vessel-on-a-chip was further constructed by culturing endothelial cells on the surface of the thermosensitive hydrogel layer, and a perfused medium was introduced to the cells to provide a physiological shear stress. Notably, cold stimulation of the vessel-on-a-chip led to cell necrosis, mitochondrial membrane potential (ΔΨm) collapse, cytoskeleton disaggregation, and increased levels of reactive oxygen species. In contrast, the static culture of endothelial cells showed limited response to cold exposure. By faithfully replicating cold-induced endothelial injury, this groundbreaking thermosensitive vessel-on-a-chip technology offers promising advancements in the study of cold-induced cardiovascular diseases, including pathogenesis and therapeutic drug screening.

Silymarin enriched gelatin methacrylamide bioink imparts hepatoprotectivity to 3D bioprinted liver construct against carbon tetrachloride induced toxicity

Three-dimensional liver bioprinting is an emerging technology in the field of regenerative medicine that aids in the creation of functional tissue constructs that can be used as transplantable organ substitutes. During transplantation, the bioprinted donor liver must be protected from the oxidative stress environment created by various factors during the transplantation procedure, as well as from drug-induced damage from medications taken as part of the post-surgery medication regimen following the procedure. In this study, Silymarin, a flavonoid with the hepatoprotective properties were introduced into the GelMA bioink formulation to protect the bioprinted liver against hepatotoxicity. The concentration of silymarin to be added in GelMA was optimised, bioink properties were evaluated, and HepG2 cells were used to bioprint liver tissue. Carbon tetrachloride (CCl4) was used to induce hepatotoxicity in bioprinted liver, and the effect of this chemical on the metabolic activities of HepG2 cells was studied. The results showed that Silymarin helps with albumin synthesis and shields liver tissue from the damaging effects of CCl4. According to gene expression analysis, CCl4 treatment increased TNF-α and the antioxidant enzyme SOD expression in HepG2 cells while the presence of silymarin protected the bioprinted construct from CCl4-induced damage. Thus, the outcomes demonstrate that the addition of silymarin in GelMA formulation protects liver function in toxic environments.

DLP Fabrication of Multiple Hierarchical Biomimetic GelMA/SilMA/HAp Scaffolds for Enhancing Bone Regeneration.

Severe bone defects resulting from trauma and diseases remain a persistent clinical challenge. In this study, a hierarchical biomimetic microporous hydrogel composite scaffold was constructed by mimicking the hierarchical structure of bone. Initially, gelatin methacrylamide (GelMA) and methacrylic anhydride silk fibroin (SilMA) were synthesized, and GelMA/SilMA inks with suitable rheological and mechanical properties were prepared. Biomimetic micropores were then generated by using an aqueous two-phase emulsification method. Subsequently, biomimetic microporous GelMA/SilMA was mixed with hydroxyapatite (HAp) to prepare biomimetic microporous GelMA/SilMA/HAp ink. Hierarchical biomimetic microporous GelMA/SilMA/HAp (M-GSH) scaffolds were then fabricated through digital light processing (DLP) 3D printing. Finally, in vitro experiments were conducted to investigate cell adhesion, proliferation, and inward migration as well as osteogenic differentiation and vascular regeneration effects. In vivo experiments indicated that the biomimetic microporous scaffold significantly promoted tissue integration and bone regeneration after 12 weeks of implantation, achieving 42.39% bone volume fraction regeneration. In summary, this hierarchical biomimetic microporous scaffold provides a promising strategy for the repair and treatment of bone defects.

Targeting Grancalcin Accelerates Wound Healing by Improving Angiogenesis in Diabetes.

Chronic diabetic wounds are a serious complication of diabetes and often result in limb amputations and confer high mortality rates. The proinflammatory secretome in the wound perpetuates defective neovascularization and contributes to dysregulated tissue repair. This study aims to design a gelatin methacrylamide (GelMA) hydrogel to sustained the release of grancalcin-neutralizing antibody (GCA-NAb) and evaluate it as a potential scaffold to promote diabetic wound healing. Results show that the expression of grancalcin(GCA), a protein secreted by bone marrow-derived immune cells, is elevated in the wound sites of individuals and animals with diabetic ulcers. Genetic inhibition of grancalcin expression accelerates vascularization and healing in an animal model. Mechanistic studies show that grancalcin binds to transient receptor potential melastatin 8(TRPM8) and partially inactivates its downstream signaling pathways, thereby impairing angiogenesis in vitro and ex vivo. Systemic or topical administration of a GCA-NAb accelerate wound repair in mice with diabetes. The data suggest that GCA is a potential therapeutic target for the treatment of diabetic ulcers.

Multi-Material Volumetric Additive Manufacturing of Hydrogels using Gelatin as a Sacrificial Network and 3D Suspension Bath.

Volumetric additive manufacturing (VAM) is an emerging layerless method for the rapid processing of reactive resins into 3D structures, where printing is much faster (seconds) than other lithography and direct ink writing methods (minutes to hours). As a vial of resin rotates in the VAM process, patterned light exposure defines a 3D object and then resin that has not undergone gelation can be washed away. Despite the promise of VAM, there are challenges with the printing of soft hydrogel materials from non-viscous precursors, including multi-material constructs. To address this, sacrificial gelatin is used to modulate resin viscosity to support the cytocompatible VAM printing of macromers based on poly(ethylene glycol) (PEG), hyaluronic acid (HA), and polyacrylamide (PA). After printing, gelatin is removed by washing at an elevated temperature. To print multi-material constructs, the gelatin-containing resin is used as a shear-yielding suspension bath (including HA to further modulate bath properties) where ink can be extruded into the bath to define a multi-material resin that can then be processed with VAM into a defined object. Multi-material constructs of methacrylated HA (MeHA)and gelatin methacrylamide (GelMA)are printed (as proof-of-concept) with encapsulated mesenchymal stromal cells (MSCs), where the local hydrogel properties guide cell spreading behavior with culture.

Evaluation of gelatin-based hydrogels for colon and pancreas studies using 3D in vitro cell culture.

Biomimetic 3D models emerged some decades ago to address 2D cell culture limitations in the field of replicating biological phenomena, structures or functions found in nature. The fabrication of hydrogels for cancer disease research enables the study of cell processes including growth, proliferation and migration and their 3D design is based on the encapsulation of tumoral cells within a tunable matrix. In this work, a platform of gelatin methacrylamide (GelMA)-based photocrosslinked scaffolds with embedded colorectal (HCT-116) or pancreatic (MIA PaCa-2) cancer cells is presented. Prior to cell culture, the mechanical characterization of hydrogels was assessed in terms of stiffness and swelling behavior. Modifications of the UV curing time enabled a fine tuning of the mechanical properties, which at the same time, showed susceptibility to the chemical composition and crosslinking mechanism. All scaffolds displayed excellent cytocompatibility with both tumoral cells while eliciting various cell responses depending on the microenvironment features. Individual and collective cell migration were observed for HCT-116 and MIA PaCa-2 cell lines, highlighting the ability of the colorectal cancer cells to cluster into aggregates of different sizes governed by the surrounding matrix. Additionally, metabolic activity results pointed out to the development of a more proliferative phenotype within stiffer networks. These findings confirm the suitability of the presented platform of GelMA-based hydrogels to conduct 3D cell culture experiments and explore biological processes associated with colorectal and pancreatic cancer.

Bioactive and biomimetic 3D scaffolds for bone tissue engineering using graphitic carbon nitride as a sustainable visible light photoinitiator

Graphitic carbon nitride (g-C3N4) is explored as a novel sustainable visible light photoinitiator for the preparation of biomimetic 3D hydrogel scaffolds comprising gelatin methacrylamide (GelMA) and dopamine methacrylamide for use in tissue engineering. The initiator efficiency was assessed by comparing the swelling behavior and the stability of photopolymerized hydrogels prepared with GelMA of different degrees of functionalization and different comonomer compositions. Bioactive composite hydrogels with a 50 wt% nanohydroxyapatite (nHAp) content, to closely mimic the actual bone composition, were successfully obtained by the introduction of nHAp in the prepolymer solutions followed by photopolymerization. The composite hydrogels demonstrated enhanced mechanical properties and excellent stability in PBS verifying the preparation of robust 3D scaffolds for use in cancellous or pre-calcified bone tissue engineering applications. The in vitro cell response of the composite scaffolds exhibited high cell viability and enhanced differentiation of pre-osteoblasts to mature osteoblasts, demonstrating their osteogenic potential. This work establishes, for the first time, the excellent properties of g-C3N4 as a sustainable, visible light initiator, fully satisfying the principles of green chemistry, for the preparation of robust and biologically relevant hydrogels, and proposes a new approach to overcome the main challenges of conventional photoinitiators in cell scaffold fabrication, such as photobleaching, high cost and non-scalable synthesis employing toxic organic precursors and solvents.

Preparation of porous GelMA microcarriers by microfluidic technology for Stem-Cell culture

Gelatin methacrylamide porous microcarriers (GelMA PMS), one of the most promising three-dimensional cell culture scaffolds, are limited in large-scale applications due to lack of ideal preparation method, unclear regulation of pore size on cell behavior and a lack of research on the entire cell culture process. Herein, combining microfluidic synchronous photo-crosslinking and ice-templating method, a low-cost, easy-assembly and suitable for scalability method is proposed to prepare GelMA PMS for bone marrow mesenchymal stem cells (BMSCs) expansion. The pore size of GelMA PMS can be controlled by adjusting the freezing temperature (-20 ℃, −60 ℃, −196℃). As a result, PMS 60 (frozen at −60 ℃) with the optimized pore size of 25.3 ± 3.2 μm exhibited the highest cell attachment ratio (90.2%) and the largest cell spreading area (0.516 mm2/MS). More importantly, PMS 60 displayed higher cell attachment efficiency, proliferation rate, adipogenic, osteogenic, and chondrogenic differentiation potential than commercial microcarriers Cytodex-1. Furthermore, BMSCs not only achieved bead-to-bead transfer on PMS 60 but also exhibited potent proliferation rate after transfer to new blank microcarriers. Cultured BMSCs were efficiently harvested from PMS 60 without damaging cell viability. In addition, the cryopreservation and thawing process did not affect the PMS 60 to support cell proliferation, while cells loaded on Cytodex-1 could not continue to proliferate. Therefore, GelMA PMS fabricated in this work shows great potential application and provides insights for MSCs culture.

Ultrasmall MnOx Nanodots Catalyze Glucose for Reactive Oxygen Species‐Dependent Sequential Anti‐Infection and Regeneration Therapy

The management of diabetic wounds poses significant challenges due to persistent bacterial infections and chronic inflammation caused by hyperglycemia. Herein, a sequential two‐phase treatment strategy involving a reactive oxygen species (ROS) burst in the first phase for anti‐infection is proposed, followed by a benign level of ROS in the second phase for wound regeneration. To this end, ultra‐small manganese oxide nanodots (BM‐NDs) are incorporated into a gelatin methacrylamide (GelMA) hydrogel via a ROS‐responsive linker to form GelMA@BM dressing. The BM‐NDs catalyze a self‐cascade reaction that decomposes glucose into hydrogen peroxide, generates hydroxyl radicals (·OH), and simultaneously depletes glutathione. Upon application on diabetic wounds, BM‐NDs are rapidly released from the hydrogel due to endogenous ROS exposure, leading to high levels of ·OH that effectively eliminate bacteria and promote macrophage polarization to M1 phenotype, thereby facilitating phagocytosis of bacteria. With the consumption of glucose and degradation of BM‐NDs, ROS in the wound area declines to a benign level, which stimulates polarization of M2 macrophages and promotes wound healing. This two‐phase treatment strategy based on GelMA@BM dressing demonstrates potent antibacterial and pro‐healing efficacy, showcasing its potential for clinical translation.

Osteosarocma progression in biomimetic matrix with different stiffness: Insights from a three-dimensional printed gelatin methacrylamide hydrogel

Recent studies on osteosarcoma and matrix stiffness are still mostly performed in a 2D setting, which is distinct from in vivo conditions. Therefore, the results from the 2D models may not reflect the real effect of matrix stiffness on cell phenotype. Here, we employed a 3D bioprinted osteosarcoma model, to study the effect of matrix stiffness on osteosarcoma cells. Through density adjustment of GelMA, we constructed three osteosarcoma models with distinct matrix stiffnesses of 50, 80, and 130 kPa. In this study, we found that osteosarcoma cells proliferated faster, migrated more actively, had a more stretched morphology, and a lower drug sensitivity in a softer 3D matrix. When placed in a stiffer matrix, osteosarcoma cells secrete more MMP and VEGF, potentially to fight for survival and attract vascular invasion. Transcriptomic analysis showed that matrix stiffness could impact the signaling pathway of integrin α5-MAPK. The transplantation of 3D printed models in nude mice showed that cells encapsulated in the softer hydrogel were more likely to form subcutaneous tumors. These results suggest that matrix stiffness plays an important role in the development of osteosarcoma in a 3D environment and that inhibition of integrin α5 could block the signal transduction of matrix stiffness.

Microfluidic Fabrication of Gelatin Acrylamide Microgels through Visible Light Photopolymerization for Cell Encapsulation.

Gelatin-based microgels are intriguing for various biomedical applications, which are conventionally prepared through photopolymerization of gelatin methacrylamide (GelMA). Here, we report on the modification of gelatin through acrylamidation to form gelatin acrylamide (GelA) with different substitution degrees, which was found to exhibit fast photopolymerization kinetics, better gelation, steady viscosity at elevated temperatures, and satisfying biocompatibility when compared to GelMA. By the online photopolymerization strategy with a home-made microfluidic setting, microgels of uniform sizes from GelA by blue light were obtained and their swollen properties were investigated. Compared to the microgels from GelMA, they showed an enhanced cross-linking degree and have better shape stability when swollen in water. Cell toxicities of the hydrogels from GelA and cell encapsulation from the corresponding microgels were investigated, which were found to exhibit superior properties than those from GelMA. We therefore believe that GelA has potential for constructing scaffolds for bioapplications and can be an excellent substitute for GelMA.

Biocompatibility evaluation of antioxidant cocktail loaded gelatin methacrylamide as bioink for extrusion-based 3D bioprinting

Three-dimensional (3D) liver bioprinting is a promising technique for creating 3D liver models that can be used for in vitro drug testing, hepatotoxicity studies, and transplantation. The functional performance of 3D bioprinted liver constructs are limited by the lack of cell–cell interactions, which calls for the creation of bioprinted tissue constructs with high cell densities. This study reports the fabrication of 3D bioprinted liver constructs using a novel photocrosslinkable gelatin methacrylamide (GelMA)-based bioink formulation. However, the formation of excess free radicals during photoinitiation poses a challenge, particularly during photocrosslinking of large constructs with high cell densities. Hence, we designed a bioink formulation comprising the base polymer GelMA loaded with an antioxidant cocktail containing vitamin C (L-ascorbic acid (AA)) and vitamin E (α-tocopherol (α-Toc)). We confirmed that the combination of antioxidants loaded in GelMA enhanced the ability to scavenge intracellular reactive oxygen species formed during photocrosslinking. The GelMA formulation was evaluated for biocompatibility in vitro and in vivo. These results demonstrated that the bioink had adequate rheological characteristics and was biocompatible. Furthermore, when compared to bioprinted constructs with lower cell density, high-density primary rat hepatocyte constructs demonstrated improved cell-cell interactions and liver-specific functions like albumin and urea secretion, which increased 5-fold and 2.5-fold, respectively.

Implantation of hydrogel-liposome nanoplatform inhibits glioblastoma relapse by inducing ferroptosis

Glioblastoma is acknowledged as the most aggressive cerebral tumor in adults. However, the efficacy of current standard therapy is seriously undermined by drug resistance and suppressive immune microenvironment. Ferroptosis is a recently discovered form of iron-dependent cell death that may have excellent prospect as chemosensitizer. The utilization of ferropotosis inducer Erastin could significantly mediate chemotherapy sensitization of Temozolomide and exert anti-tumor effects in glioblastoma. In this study, a combination of hydrogel-liposome nanoplatform encapsulated with Temozolomide and ferroptosis inducer Erastin was constructed. The αvβ3 integrin-binding peptide cyclic RGD was utilized to modify codelivery system to achieve glioblastoma targeting strategy. As biocompatible drug reservoirs, cross-linked GelMA (gelatin methacrylamide) hydrogel and cRGD-coated liposome realized the sustained release of internal contents. In the modified intracranial tumor resection model, GelMA-liposome system achieved slow release of Temozolomide and Erastin in situ for more than 14 d. The results indicated that nanoplatform (T+E@LPs-cRGD+GelMA) improved glioblastoma sensitivity to chemotherapeutic temozolomide and exerted satisfactory anti-tumor effects. It was demonstrated that the induction of ferroptosis could be utilized as a therapeutic strategy to overcome drug resistance. Furthermore, transcriptome sequencing was conducted to reveal the underlying mechanism that the nanoplatform (T+E@LPs-cRGD+GelMA) implicated in. It is suggested that GelMA-liposome system participated in the immune response and immunomodulation of glioblastoma via interferon/PD-L1 pathway. Collectively, this study proposed a potential combinatory therapeutic strategy for glioblastoma treatment.

GelMA and Biomimetic Culture Allow the Engineering of Mineralized, Adipose, and Tumor Tissue Human Microenvironments for the Study of Advanced Prostate Cancer In Vitro and In Vivo.

Increasing evidence shows bone marrow (BM)-adipocytes as a potentially important contributor in prostate cancer (PCa) bone metastases. However, a lack of relevant models has prevented the full understandingof the effects of human BM-adipocytes in this microenvironment. It is hypothesized that the combination of tunable gelatin methacrylamide (GelMA)-based hydrogels with the biomimetic culture of human cells would offer a versatile 3D platform to engineer human bone tumor microenvironments containing BM-adipocytes. Human osteoprogenitors, adipocytes, and PCa cells are individually cultured in vitro in GelMA hydrogels, leading to mineralized, adipose, and PCa tumor 3D microtissues, respectively. Osteoblast mineralization and tumor spheroid formation are tailored by hydrogel stiffness with lower stiffnesses correlating with increased mineralization and tumor spheroid size. Upon coculture with tumor cells, BM-adipocytes undergo morphological changes and delipidation, suggesting reciprocal interactions between the cell types. When brought in vivo, the mineralized and adipose microtissues successfully form a humanized fatty bone microenvironment, presenting, for the first time, with human adipocytes. Using this model, an increase in tumor burden is observed when human adipocytes are present, suggesting that adipocytes support early bone tumor growth. The advanced platform presented here combines natural aspects of the microenvironment with tunable properties useful for bone tumor research.

Tuning of Mechanical Properties in Photopolymerizable Gelatin-Based Hydrogels for In Vitro Cell Culture Systems.

The mechanical microenvironment plays a crucial role in the evolution of colorectal cancer, a complex disease characterized by heterogeneous tumors with varying elasticity. Toward setting up distinct scenarios, herein, we describe the preparation and characterization of gelatin methacrylamide (GelMA)-based hydrogels via two different mechanisms: free-radical photopolymerization and photo-induced thiol-ene reaction. A precise stiffness modulation of covalently crosslinked scaffolds was achieved through the application of well-defined irradiation times while keeping the intensity constant. Besides, the incorporation of thiol chemistry strongly increased stiffness with low to moderate curing times. This wide range of finely tuned mechanical properties successfully covered from healthy tissue to colorectal cancer stages. Hydrogels prepared in phosphate-buffered saline or Dulbecco's modified Eagle's medium resulted in different mechanical and swelling properties, although a similar trend was observed for both conditions: thiol-ene systems exhibited higher stiffness and, at the same time, higher swelling capacity than free-radical photopolymerized networks. In terms of biological behavior, three of the substrates showed good cell proliferation rates according to the formation of a confluent monolayer of Caco-2 cells after 14 days of cell culture. Likewise, a characteristic apical-basal polarization of cells was observed for these three hydrogels. These results demonstrate the versatility of the presented platform of biomimetic materials as in vitro cell culture scaffolds.

A conductive gelatin methacrylamide hydrogel for synergistic therapy of osteosarcoma and potential bone regeneration

In this study, a methacrylic gelatin/oxidized dextran/montmorillonite‑strontium/polypyrrole (GOMP) hydrogel was prepared. The GOMP hydrogel had dual network structure which was formed through photoinitiator-initiated double bond polymerization and Schiff base reaction. The network structure led to a sustained release of the antitumor drug, doxorubicin (DOX). Polypyrrole introduced the conductivity and high photothermal conversion capacity to the GOMP hydrogel, which showed a photothermal conversion efficiency of 31.61 % under 808 nm laser radiation. The GOMP hydrogel had good swelling properties in solvents. Further study showed that the GOMP hydrogel had good biocompatibility and excellent biodegradability in vitro and in vivo. The experiments of in vitro tumor therapy and in vivo anti-tumor recurrence indicated that the DOX-loaded GOMP hydrogel had synergistic effects on tumor cell apoptosis based on chemotherapy and photothermal therapy. In addition, montmorillonite‑strontium (MMT-Sr) doped in the hydrogel not only improved the mechanical properties of the hydrogel but also promoted potential bone regeneration. The multifunctional DOX-loaded GOMP hydrogel with bone regeneration, photothermal therapy, and chemotherapy functions has great potential application for treating osteosarcoma.

DLP fabricating of precision GelMA/HAp porous composite scaffold for bone tissue engineering application

The hydrogel composited hydroxyapatite (HAp) scaffold shown biomimetic extracellular matrix and osteogenic activity, which is a promising bone regeneration biomaterial. 3D printing has been widely used in fabrication of customized and complex bone regeneration scaffold. However, it is still a challenge to prepare high-precision HAp reinforced composites by digital light processing (DLP) printing that can effectively promote bone regeneration. In this study, shear-thinning gelatin methacrylamide (GelMA)/hydroxyapatite (HAp) composite inks were prepared to fabricate high-precision scaffolds by DLP printing for bone repair. Firstly, GelMA hydrogels with adjustable mechanical, rheological and printing properties were synthesized to screen hydrogel concentration and degree of substitution. Then carefully selected biocompatible dispersants to reduce the agglomeration of hydroxyapatite. The actual printing resolution of the GelMA/HAp porous composite scaffolds with excellent mechanical strength through DLP 3D printing was up to about 100 μm. In vitro, the 3D printed composite scaffold significantly promoted the adhesion and proliferation of osteoblasts, as well as promoted osteogenic differentiation. In vivo, the GelMA/HAp porous composite scaffolds showed excellent ability in accelerating the formation of new bone in rabbit skull defects. The GelMA/HAp porous composite scaffolds fabricated by the composite inks with good printability, mechanical properties and osteogenic activity have fascinating potential in bone repair application.

Creating a Functional Biomimetic Cartilage Implant Using Hydrogels Based on Methacrylated Chondroitin Sulfate and Hyaluronic Acid.

The load-bearing function of articular cartilage tissue contrasts with the poor load-bearing capacity of most soft hydrogels used for its regeneration. The present study explores whether a hydrogel based on the methacrylated natural polymers chondroitin sulfate (CSMA) and hyaluronic acid (HAMA), injected into warp-knitted spacer fabrics, could be used to create a biomimetic construct with cartilage-like mechanical properties. The swelling ratio of the combined CSMA/HAMA hydrogels in the first 20 days was higher for hydrogels with a higher CSMA concentration, and these hydrogels also degraded quicker, whereas those with a 1.33 wt% of HAMA were stable for more than 120 days. When confined by a polyamide 6 (PA6) spacer fabric, the volumetric swelling of the combined CSMA/HAMA gels (10 wt%, 6.5 × CSMA:HAMA ratio) was reduced by ~53%. Both the apparent peak and the equilibrium modulus significantly increased in the PA6-restricted constructs compared to the free-swelling hydrogels after 28 days of swelling, and no significant differences in the moduli and time constant compared to native bovine cartilage were observed. Moreover, the cell viability in the CSMA/HAMA PA6 constructs was comparable to that in gelatin–methacrylamide (GelMA) PA6 constructs at one day after polymerization. These results suggest that using a HydroSpacer construct with an extracellular matrix (ECM)-like biopolymer-based hydrogel is a promising approach for mimicking the load-bearing properties of native cartilage.