Four-coordinate Bis Research Articles

CuII{(LISQ)˙-}2] (H2L: thioether-appended o-aminophenol ligand) monocation triggers change in donor site from N2O2 to N2O(2)S and valence-tautomerism.

Using a potentially tridentate o-aminophenol-based redox-active ligand H2L1 (2-[2-(benzylthio)phenylamino]-4,6-di-tert-butylphenol) in its deprotonated form, [Cu(L1)2] has been synthesized and crystallized as [CuII(L1)2]·CH2Cl2 (1·CH2Cl2). A cyclic voltammetry experiment (in CH2Cl2; V vs. SCE (saturated calomel electrode)) on 1·CH2Cl2 exhibits two oxidative (E = 0.20 V (peak-to-peak separation, ΔEp = 100 mV) and E = 0.90 V (ΔEp = 140 mV)) and two reductive (E = -0.52 V (ΔEp = 110 mV) and E = -0.92 V (ΔEp = 120 mV)) responses. Upon oxidation using a stoichiometric amount of [FeIII(η5-C5H5)2](PF6), 1·CH2Cl2 yielded [Cu(L1)2](PF6) (2). Structural analysis (100 K) reveals that 1·CH2Cl2 is a four-coordinate bis(iminosemiquinonato)copper(ii) complex (CuN2O2 coordination), and that the thioethers remain uncoordinated. The twisted geometry of 1 (distorted tetrahedral) results in considerable changes in the electronic structure, compared to well-known square-planar analogues. Crystallographic analysis of 2 both at 100 K and at 293 K reveals that it is effectively a four-coordinate complex with a CuN2OS coordination; however, a substantial interaction with the other phenolate O is observed. The metal-ligand bond distances and metric parameters associated with the o-aminophenolate rings indicate a valence-tautomeric (VT) equilibrium involving monocationic (iminosemiquinonato)(iminoquinone)copper(ii) and bis(iminoquinone)copper(i). Complex 1·CH2Cl2 is a three-spin system and a magnetic study (4-300 K) established that it has a S = 1/2 ground-state, owing to the strong antiferromagnetic coupling between the unpaired spin of the copper(ii) and the iminosemiquinonate(1-) π-radical anion. Electron paramagnetic resonance (EPR) spectral studies corroborate this result. Complex 2 is diamagnetic and the existence of VT in 2 was probed using variable-temperature (248-328 K) 1H NMR and EPR (100-298 K) spectral measurements and X-ray photoelectron spectroscopic studies at 298 K. Remarkably, modification of the well-studied 2-anilino-4,6-di-tert-butylphenol by incorporation of a benzylthioether arm leads to the occurrence of VT in 2. The electronic structure of 1·CH2Cl2 and 2 has been assigned using density functional theory (DFT) calculations at the B3LYP-D3 level of theory. Time-dependent (TD)-DFT calculations have been performed to elucidate the origin of the observed UV-VIS-NIR absorptions.

Oxidative Addition of Disulfides, Alkyl Sulfides, and Diphosphides to an Aluminum(I) Center.

The aluminum(I) compound NacNacAl (1) reacts with diphenyl disulfide and diethyl sulfide to form the respective four-coordinate bis(phenyl sulfide) complex NacNacAl(SPh)2 (2) and alkyl thiolate aluminum complex NacNacAlEt(SEt) (3). As well, reaction of 1 with tetraphenyl diphosphine furnishes the bis(diphenyl phosphido) complex NacNacAl(PPh2)2 (4). Production of 3 and 4 are the first examples of C(sp(3))-S and R2P-PR2 activation by a main-group element complex. All three complexes were characterized by multinuclear NMR spectroscopy and X-ray crystal structure analysis. Furthermore, a variable-temperature NMR spectroscopic study was undertaken on 4 to study its dynamic behavior in solution.

One-Electron-Redox Activation of the Reduced Phillips Polymerization Catalyst, via Alkylchromium(IV) Homolysis: A Computational Assessment

In ethylene polymerization by the Phillips catalyst, inorganic Cr(II) sites are believed to be activated by reaction with ethylene to form (alkyl)CrIII sites, in a process that takes about 1 h at ca. 373 K. The detailed mechanism of this spontaneous self-initiation has long remained unknown. It must account both for the formation of the first Cr–C bond and for the one-electron oxidation of Cr(II) to Cr(III). In this study, we used density functional theory to investigate a two-step initiation mechanism by which ethylene oxidative addition leads first to various (organo)CrIV sites, and subsequent Cr–C bond homolysis gives (organo)CrIII sites capable of polymerizing ethylene. Pathways involving spin crossing, C–H oxidative addition, H atom transfer, and Cr–C bond homolytic cleavage were explored using a chromasiloxane cluster model. In particular, we used classical variational transition theory to compute free energy barriers and estimate rates for bond homolysis. A viable route to a four-coordinate bis(alkyl)CrIV site was found via spin crossing in a bis(ethylene)CrII complex followed by intramolecular H atom transfer. However, the barrier for subsequent Cr–C bond homolysis is a formidable 209 kJ/mol. Increasing the Cr coordination number to 6 with additional siloxane ligands lowers the homolysis barrier to just 47 kJ/mol, similar to reported homolysis paths in molecular [CrR(H2O)53+] complexes. However, siloxane coordination also raises the barrier for the prior oxidative addition step to form the bis(alkyl)CrIV site. Thus, we suggest that hemilability in the silica “ligand” may facilitate the homolysis step while still allowing the oxidative addition of ethylene.

Halo, Alkyl, Aryl, and Bis(imido) Complexes of Niobium Supported by the β-Diketiminato Ligand

Synthesis of the complex (BDI)Nb(N(t)Bu)Cl(2)py (BDI = HC[C(Me)N(2,6-iPr(2)-C(6)H(3))](2)) was achieved in high yield following the treatment of Nb(N(t)Bu)Cl(3)py(2) with Li(BDI)(OEt(2)). Substitution of the chlorides for fluorides was effected by introducing 2.0 equiv of Me(3)SnF in toluene, providing the pyridine-coordinated difluoride complex (BDI)Nb(N(t)Bu)F(2)py in modest yield. The pyridine ligands from both halide compounds were removed by treatment of the pyridine adducts with B(C(6)F(5))(3), affording the Lewis base-free complexes (BDI)Nb(NtBu)X(2) (X = Cl, F). Additionally, the Lewis base-free dichlorides of the (t)Bu-imido and Ar-imido (Ar = 2,6-(i)Pr(2)-C(6)H(3)) complexes were obtained following treatment of Nb(NR)Cl(3)(dme) (R = tBu, Ar) with Li(BDI)(OEt(2)). The pyridine-coordinated dichloride was alkylated and arylated to form the dimethyl complex (BDI)Nb(N(t)Bu)Me(2) (described previously, see text) and the mono(p-tolyl) complex (BDI)Nb(N(t)Bu)Cl(p-tol), the latter of which was methylated with MeMgBr to yield the mixed alkyl/aryl complex (BDI)Nb(N(t)Bu)Me(p-tol) in good yield. A rare example of a Group 5 bis((t)Bu-imido) species was synthesized in good yield via treatment of (BDI)Nb(N(t)Bu)Cl(2)py with 2.0 equiv of LiNHtBu to form (BDI)Nb(NtBu)(2)py. Exchange of the coordinated pyridine ligand for either pyridine-d(5) or dmap (p-(dimethylamino)pyridine) was shown to occur through a dissociative mechanism, allowing for removal of the coordinated Lewis base by treatment with B(C(6)F(5))(3). The resulting average C(2v)-symmetric tetracoordinate bis(imido) complex (BDI)Nb(N(t)Bu)(2) was characterized in solution by NMR spectroscopy and observed to undergo clean thermal decomposition to yield (BDI(#))Nb(N(t)Bu)(NH(t)Bu) (BDI(#) = H(2)C=C(NAr)CH=C(NAr)Me) over several hours at room temperature. Treatment of the four-coordinate bis(imido) with (t)BuNCO resulted in clean [2 + 2] cycloaddition to yield an oxaazametallacyclobutane complex, which was further observed to extrude (t)BuN=C=N(t)Bu over 12 h at room temperature. The molecular structures of (BDI)Nb(N(t)Bu)Cl(2)py, (BDI)Nb(NAr)Cl(2), (BDI)Nb(N(t)Bu)Me(2), (BDI)Nb(N(t)Bu)Cl(p-tol), (BDI)Nb(N(t)Bu)(2)py, and (BDI)Nb(NtBu)(2)(dmap) were determined crystallographically. Finally, DFT (BP86) geometry optimization calculations on a model complex of the thermally unstable four-coordinate bis(imido) species allowed for identification of the orbital interactions leading to activation of the imido groups through mixing with the BDI frontier orbitals.

Synthesis of Bis(imino)pyridine Iron Di- and Monoalkyl Complexes: Stability Differences between FeCH2SiMe3and FeCH2CMe3Derivatives

The scope of aryl-substituted bis(imino)pyridine iron dihalide alkylation and arylation reactions has been explored with LiCH2SiMe3, LiCH2CMe3, and LiPh. Dialkylation was only observed when the 2,6-diisopropylaryl-substituted iron complex was treated with 2 equiv of LiCH2SiMe3. In all other cases, reductive alkylation to form four-coordinate bis(imino)pyridine iron monoalkyl complexes occurred. One of these products, (EtPDI)FeCH2CMe3 [EtPDI = 2,6-(2,6-Et2C6H3N═CMe)2C6H3N)], has been crystallographically characterized and shown to exhibit a distorted square planar geometry arising from the steric disposition of the alkyl group. Five-coordinate bis(imino)pyridine iron aryl“ate” complexes bearing weakly activated dinitrogen ligands were isolated from treatment of the corresponding dihalide with 3 equiv of aryllithium. The tolyl derivative was characterized by X-ray diffraction, and a distorted square pyramidal structure was established where the dinitrogen ligand completes the idealized basal plane. Ligand substitution reactions where the terdentate bis(imino)pyridine is used to displace pyridine from py2Fe(R)X (R = CH2SiMe3, CH2CMe3; X = Cl, CH2SiMe3, CH2CMe3) further demonstrated the relative stability of five-coordinate FeCH2SiMe3 versus FeCH2CMe3 complexes. For the neopentyl compounds, ejection of a neopentyl radical or alkylation of the p-pyridine position of the chelate was observed.

Facile Oxidation-Based Synthesis of Sterically Encumbered Four-Coordinate Bis(2,9-di-tert-butyl-1,10-phenanthroline)copper(I) and Related Three-Coordinate Copper(I) Complexes

A new oxidation-based synthetic route was developed for synthesis of Cu(I) complexes with weakly coordinating ligands, leading to the synthesis of the elusive [Cu(dtbp)2]+ (dtbp, 2,9-di-tert-butyl-1,10-phenanthroline) complex that may be useful as a sensor or as a dye for dye-sensitized solar cells. An acetone solution of either 1 or 2 equiv of dtbp was added to excess Cu(0) and 1 equiv of AgY (Y is O3SCF3-, BF4-, SbF6-, or B(C6F5)4-) in a nitrogen-filled glove box. Following filtration and evaporation under vacuum, crystallization from CH2Cl2 and hexanes results in X-ray quality crystals of Cu(dtbp)(O3SCF3) (1), Cu(dtbp)(BF4) (2), [Cu(dtbp)(acetone)][SbF6] (3), [Cu(dtbp)2][B(C6F5)4].CH2Cl2 (4.CH2Cl2), [Cu(dtbp)2][BF4].CH2Cl2 (5.CH2Cl2), and [Cu(dtbp)2][SbF6].CH2Cl2 (6.CH2Cl2). Complexes 1-6 were characterized by X-ray crystallography and NMR. The Cu atom in complexes 1-3 exhibited distorted trigonal coordination geometries, reflecting the steric effect of the bulky tert-butyl substituents. The structures of the pseudotetrahedral complexes 4, 4.CH2Cl2, 5.CH2Cl2, and 6.CH2Cl2 revealed the longest average Cu-N distances (2.11 A, 2.11 A, 2.10 A, and 2.11 A, respectively) in this class of compounds-longer by more than three standard deviations from the average.

A versatile route to well-defined molybdenum metathesis catalysts via mixed imido precursors: the molecular structure of [Mo(N-2,6-Pri 2C6H3)(N-But)(CH2CMe3)2

The four-coordinate bis(imido) dialkyl complex [Mo(N-2,6-Pri2C6H3)(N-But)(CH2CMe3)2] is readily converted to well-defined alkylidene metathesis catalysts upon treatment with alcoholic or phenolic activators.

Stereochemistry of four-coordinate bis(methinodiphosphinate)metal(II) chelate complexes

ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTStereochemistry of four-coordinate bis(methinodiphosphinate)metal(II) chelate complexesA. Davison and D. L. RegerCite this: Inorg. Chem. 1971, 10, 9, 1967–1970Publication Date (Print):September 1, 1971Publication History Published online1 May 2002Published inissue 1 September 1971https://doi.org/10.1021/ic50103a028RIGHTS & PERMISSIONSArticle Views113Altmetric-Citations52LEARN ABOUT THESE METRICSArticle Views are the COUNTER-compliant sum of full text article downloads since November 2008 (both PDF and HTML) across all institutions and individuals. These metrics are regularly updated to reflect usage leading up to the last few days.Citations are the number of other articles citing this article, calculated by Crossref and updated daily. Find more information about Crossref citation counts.The Altmetric Attention Score is a quantitative measure of the attention that a research article has received online. Clicking on the donut icon will load a page at altmetric.com with additional details about the score and the social media presence for the given article. Find more information on the Altmetric Attention Score and how the score is calculated. Share Add toView InAdd Full Text with ReferenceAdd Description ExportRISCitationCitation and abstractCitation and referencesMore Options Share onFacebookTwitterWechatLinked InReddit PDF (558 KB) Get e-Alerts Get e-Alerts

Stereochemistry of four-coordinate bis(imidodiphosphinato)metal(II) chelate complexes

ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTStereochemistry of four-coordinate bis(imidodiphosphinato)metal(II) chelate complexesAlan Davison and Ellen S. SwitkesCite this: Inorg. Chem. 1971, 10, 4, 837–842Publication Date (Print):April 1, 1971Publication History Published online1 May 2002Published inissue 1 April 1971https://doi.org/10.1021/ic50098a034RIGHTS & PERMISSIONSArticle Views292Altmetric-Citations93LEARN ABOUT THESE METRICSArticle Views are the COUNTER-compliant sum of full text article downloads since November 2008 (both PDF and HTML) across all institutions and individuals. These metrics are regularly updated to reflect usage leading up to the last few days.Citations are the number of other articles citing this article, calculated by Crossref and updated daily. Find more information about Crossref citation counts.The Altmetric Attention Score is a quantitative measure of the attention that a research article has received online. Clicking on the donut icon will load a page at altmetric.com with additional details about the score and the social media presence for the given article. Find more information on the Altmetric Attention Score and how the score is calculated. Share Add toView InAdd Full Text with ReferenceAdd Description ExportRISCitationCitation and abstractCitation and referencesMore Options Share onFacebookTwitterWechatLinked InReddit PDF (756 KB) Get e-Alerts Get e-Alerts