Oil Formulations Research Articles

A review on formulation and evaluation of herbal hair oil

Review article emphasizes the importance of herbal hair oil for the healthy life of hairs. Herbal hair oil are hair care components implemented to the hair for the treatment of hair disorders. Herbal hair oil is a critical part of natural cosmetics. This review article involves the objectives of herbal hair oil, which includes herbal goodness of hair, manage frizzy hair, fight towards hair fall, etc. This emphasizes on the commonly used ingredients in the formulation of herbal hair oil which involves coconut oil, till oil, almond oil, Hibiscus, jasmine. This review also involves a table in which there is mentioned the ingredients, the quantity used in the formulation and the importance of the ingredients mentioned over there. This also involves the benefits of herbal hair oil and the method as well as evaluation tests for herbal hair oil preparations. Using herbal hair oil is growing everyday a step with the development in preferred of dwelling of human beings to present herbal flavours and colourings to hair oil the herbal essences and perfumes are introduced. Herbal hair oil is greater desired and used in lots of aliments of hair.

Formulation and effectiveness test of clove flower oil (Syzygium aromaticum L.) nanoemulsigel preparations against Propionibacterium acnes bacteria

Background: Acne is a chronic inflammatory process in the pilosebaceous glands. The appearance of acne is a process of follicular hyper-keratinization, which causes blockage of the pores so that the hair follicles are blocked by bacteria known as Propionibacterium acnes. Clove flower oil contains eugenol compounds which have the strongest activity against gram-positive and gram-negative bacteria. Methods: In this research, antibacterial activity tests were carried out on clove flower oil with various concentrations and nano-emulsion gel preparations were made with a clove flower oil concentration of 1.5%; 3%; 5.5%, which was then tested for antibacterial activity on the nano-emulsion gel preparations of clove flower oil measured using a caliper and the diameter of the inhibition zone produced was recorded. Results: the results of the organoleptic research showed that the color was yellow, transparent and had a distinctive odor, homogeneity showed that there were no coarse particles, viscosity was still within the required range, pH showed that the pH was still within the required range of 4.5-6.5, particle size test was below 200 nm, cycling test showed that it was stable during storage at hot and cold temperatures for 6 cycles of P. acnes inhibitory clove flower oil nano-emulsion preparation with a concentration of 1.5%; 3%; 5.% respectively have resistance of 11.60 mm, 13.53 mm, 15.76 mm Conclusions: From the results of the research that has been carried out, it is concluded that clove flower oil can be formulated into a nano-emulsion gel preparation, is stable during cycling tests, and has a particle size below 200 nm. Nano-emulsion gel formulations have the greatest antibacterial activity compared to emulsion gel formulations.

Synthesis and efficacy of cinnamon oil formulations and their sustainable release against common house mosquito larvae

BackgroundControl of mosquitoes is considered an essential public health priority. This study was designed to estimate the larvicidal activity of two formulations of Cinnamomum zeylanicum EO for controlling Culex pipiens larvae.ResultsThe prepared formulations were a nanoemulsion of cinnamon (CNE), cinnamon (CN) alone and ordinary cinnamon essential oil mixed with sesame oil (CSO). The cinnamon + sesame oil (CSO) was added as one part cinnamon to 3 parts SO. Different concentrations were prepared and applied following the WHO larvicidal bioassay protocol. Our findings revealed that the LC50 of the CNE form ranged from 85.3 µg/mL to 28.30 µg/mL. The LC50 of SO alone was 1265 µg/mL but when mixed with CNE to form the CSO mixture, this decreased to 159.00 µg/mL. In terms of residual effect, the ordinary form of cinnamon had a residual effect in water for 72 h at a dose of 1000 µg/ml, but this extended to 120 h at the same dose when the CNE form was used. However CSO did not have a residual effect, however.ConclusionThe nanoemulsion form significantly improved the efficacy and residual effect of cinnamon against Culex pipiens larvae. Additionally, mixing cinnamon with sesame oil had a synergistic effect. This may assist control strategies against the house mosquito, Culex pipiens.

Effect of Plant Essential Oil Formulations on Bemisia tabaci MEAM1 (Gennadius) and Its Parasitoid Eretmocerus hayati (Zolnerowich and Rose).

Silverleaf whitefly (SLW), Bemisia tabaci (Gennadius) (Hemiptera: Aleyrodidae), consists of genetically diverse species known to cause significant destruction in many crops around the world. Nowadays, synthetic insecticides are a key component in the management of this pest. However, they also come with disadvantages, such as environmental pollution, pest resistance and recurrence, and toxicity to pollinators and natural enemies. Essential oils from aromatic plants and biocontrol agents may provide a new and safe alternative to synthetic chemicals. In this study, we assessed the lethal impact of three new plant essential oil formulations (referred to as F1, F2, and F3) against the developmental stages of B. tabaci and its parasitoid Eretmocerus hayati (Zolnerowich and Rose) (Hymenoptera: Aphelinidae). The tested formulations consisted of combinations of mustard oil and different surfactants. The formulations were effective against the eggs and nymphal stages of B. tabaci. At the highest concentration assessed (1.23%), F1 was the most effective formulation against the eggs, resulting in 85% mortality, whereas F2 was most effective against the nymphs (92.5% and 88.3% mortality for the young and old nymphs, respectively). However, adult mortality rates were below 40% for all the tested formulations. The range of median lethal concentration (LC50) values was between 0.65 and 1.05% for B. tabaci. The side effects of the three formulations were assessed against E. hayati, treated as parasitized nymphs of B. tabaci. At the highest tested concentration (1.23%), F2 and F3 resulted in 80% and 70% mortality of the parasitoids, respectively (classified as moderately or slightly harmful according to the IOBC), whereas F1 resulted in 17.5% mortality. As F1 was effective against SLW with minimal effects on the parasitoid, it is the most suitable formulation of those tested for use in an integrated pest management (IPM) program targeting the younger life stages of B. tabaci.

Use of Starch and Biochar-Based Essential Oil Formulations from Three Aromatic Plants as Antifungal Components to Improve Peanut (Arachis hypogaea L.) Seed Storage

Poor storage conditions of foodstuffs are responsible for their deterioration on many microorganism species with substantial quantitative and qualitative losses. During storage, formulating essential oil of some antifungal plants' based on cassava starch and corncob biochar efficacy was evaluated on fungi associated with peanut seeds (Arachis hypogaea L.). Two hundred peanut seeds were dispersed in plastic bottles; 5 g of essential oil formulation starch-based (3 and 7 µl/g) were sprinkled on the seeds. Biochar pieces were added to the seeds in the bottles for biochar-based essential oils. Laboratory conditions were used to store both treatment and non-treatment seeds for 70 days. Infection rates of fungal infections were estimated at 10, 20, 40, 60, and 70 days of storage. From the results obtained, five fungal genera were isolated from peanut seeds, including four species of Aspergillus, Cercospora sp, Fusarium sp, Phomopsis sp and Rhizopus stolonifer, with seed infection percentages ranging from 4 to 62%. The antifungal activity of starch-based formulations revealed that at a concentration of 3 µl/g, Cymbopogon citratus essential oil is the most effective antifungal agent, 13% infection for 70 days resulted storage of peanut seeds. After 70 days of storage, at a dose of 7 µl/g, C. sempervirens essential oil had the best antifungal efficacy with 23.50% of infected seeds for the biochar-based formulation. As a result of these findings, starch and biochar can be used to formulate essential oils for the conservation of peanut seeds. Moreover, Cymbopogon citratus essential oil formulated with starch is the most effective.

Design and characterisation of topical emulgel containing neem oil for its antidandruff properties

Emulgel is a novel drug delivery system for controlled release of drug. It is suitable for the dual release of drugs. This study focuses on the development and characterization of topical emulgel containing neem oil for its anti-dandruff properties. Neem oil is emulsified using suitable surfactant in the ratio 4:2:1 and the prepared emulsion is incorporated with Carbopol gel base in ratio1:1. A total of 5 formulations were prepared using the polymer carbopol-934. Topical emulgel of neem oil was formulated and subjected to evaluation studies such as organoleptic properties, pH, Viscosity, Spreadibility, Invitro diffusion studies, Accelerated stability studies using ultracentrifugation, SEM analysis and Invitro antifungal properties. Formulation F5 subjected to in vitro oil diffusion study had shown a total release of 65.27% after 8 hours. Korsmeyer-Peppa’s plot had shown that the mechanism of diffusion was non-fickian. Emulgel of neem oil shown zone of inhibition on invitro antifungal study using Candida albicans as fungi. Formulation F5 show highest zone of inhibition of 12mm as compared to other formulations. It was concluded that, formulation of neem oil as a semi solid dual release control emulgel formulation with a time dependant oil diffusion, also add up all the advantage of a semisolid dosage compared to liquids with optimum Spreadibility, stability, aesthetic appearance, adherence to the affected scalp area and with pH that is similar scalp.

Assessment of Entomopathogenic Nematodes in Oil Emulsions to Control Scyphophorus acupunctatus in Agave under Laboratory Conditions

The weevil Scyphophorus acupunctatus Gyllenhal causes damage and losses in agave crops and has traditionally been controlled using contact and systemic agrochemicals. Implementing microbial control strategies is proposed as an alternative to mitigate the environmental impact associated with agrochemicals. The objective of this study was to determine the survival of entomopathogenic nematodes in oil emulsions for the control of adult S. acupunctatus. Three species of entomopathogenic nematodes were evaluated: Steinernema carpocapsae, S. glaseri, and Heterorhabditis bacteriophora. We used two concentrations (50 ± 5 and 100 ± 10 infectious juvenile nematodes), and oil emulsions derived from Salvia hispanica, Triticum vulgare, and Olea europea with oil purity of 20% and 40%. The effectiveness of these treatments was assessed by determining the mortality rate of S. acupunctatus. The results indicate that the combination of S. glaseri and H. bacteriophora, at concentrations of 50 ± 5 and 100 ± 10 nematodes, respectively, with T. vulgare and O. europea oils, achieved a mortality rate of 85.76% in S. acupunctatus adults at 24 h. At 120 h, a mortality rate of 100% was achieved with specific formulations, such as S. glaseri with 100 ± 10 nematodes + O. europea, and H. bacteriophora with 100 ± 10 nematodes + O. europea. Consequently, we conclude that oil formulations combined with nematodes show potential as an effective and environmentally friendly alternative for the control and management of S. acupunctatus.

Combination of a solid phase extraction and a two-dimensional LC-UV method for the analysis of vitamin D3 and its isomers in olive oil

The current HPLC methods for the quantification of vitamin D3 (VitD3) and its two isomers previtamin D3 (PreVitD3) and trans-vitamin D3 (trans-VitD3) in olive oil preparations present some limitations mainly due to peak overlapping of the oily matrix components with the compounds of interest. The use of two-dimensional liquid chromatography (2D-LC) with different retention mechanism can reach higher resolving power thus allowing the analysis of complex samples.The present paper proposes a new alternative method including a solid phase extraction sample preparation step and a two-dimensional liquid chromatographic analysis using routine instrumentation, fitting the needs of quality assurance and quality control laboratories of pharmaceutical companies. The extraction protocol was demonstrated to provide a clean-up of the sample and a quantitative recovery of the species of interest. The 2D method proved its suitability in the isolation of vitamins from oil components in the first dimension and the separation and quantification of the analytes in the second dimension thanks to the orthogonal selectivities of phenyl and porous graphitic carbon (PGC) stationary phases.The method was validated following ICH guidelines and possesses an adequate sensitivity to quantify the impurity trans-VitD3 in pharmaceuticals considering the limits imposed by regulatory agencies. The applicability of the phenyl x PGC 2D-LC-UV method to quality control of medicinal products based on VitD3 in olive oil was confirmed by the successful quantification of vitamins in olive oil formulations.

In vitro and ex vivo anti-Pythium insidiosum potential of ozonated sunflower oil.

This study sought to evaluate the in vitro and ex vivo susceptibility of Pythium insidiosum to ozonized sunflower oil (OSO) and verify the morphological alterations of OSO-exposed hyphae. Susceptibility assays were performed according to the broth microdilution protocol M38-A2/CLSI, and the minimal inhibitory (MIC) and minimal oomicidal (MOC) concentrations were also determined. Non-ozonated sunflower oil (SO) was used as the oil control. Additionally, kunkers from equine pythiosis were exposed to OSO. Damages caused by OSO and SO on P. insidiosum hyphae ultrastructure were verified using scanning electron microscopy. The MIC range for OSO was 7000 to 437.5mg/mL, and the values for SO were higher, ranging from 56000 to 14000mg/mL. The MOC was equal to MIC for both oil formulations. The OSO fully inhibited the oomycete growth from kunkers, although there was P. insidiosum growth in the kunker control in 24h of incubation. The SEM analyses showed that both OSO and SO caused morphological alterations in P. insidiosum hyphae, highlighting the presence of cavitation along the hyphae with loss of continuity of the cell wall, which was more evident in the OSO-treated hyphae. The OSO had the best oomicidal activity, leading us to believe that our findings may support future research containing this formulation to be applied in integrative medicine protocols to control pythiosis in animals and humans.

Phytotoxicity activities and chemical composition of the seed essential oil of Monodora myristica

The phytotoxic effect of essential oil from African nutmeg (Monodora myristica) seeds on growth of tomato (Solanum lycopersicum L)., maize (Zea mays), and cowpea (Vigna unguiculata) was examined. Essential oil from the seeds of M. myristica was extracted by hydrodistillation. The essential oil’s composition was examined by gas chromatography-mass spectrometry (GC-MS). The phytotoxicity of the essential oil formulation at different concentrations for five days was evaluated on the leaves and roots. The activity was ascertained by estimating the shoots’ and the roots’ lenght. The result of GC-MS showed α–phellandrene (43.2%) as the essential oil's main constituent. The essential oil reduced the growth of the root and shoot of tomato, maize, and cowpea. At 4 mL/L treatment, the percentage inhibition of roots ranged from 63.8 to 75.4% after five days, while that of the shoot was 100% after three days. A varying toxicity was reported on the leaves of the seedlings of the plants after 24 hours. Phytotoxic was more potent on the leaves of cowpea and lowest in tomato. Phototoxic activity was also noted when essential oil was administered to the Seedling’s roots. The three species showed notable phytotoxicity when exposed to the essential oil of M. myristica.

Pharmacokinetics of Two Nanoemulsion Formulations of Δ8-Tetrahydrocannabinol in Rats.

The use of Δ8-tetrahydrocannabinol (Δ8-THC) has increased in recent years. Given that the oral absorption of cannabinoids in oil formulations is typically slow and variable, nanoemulsions may be an improved delivery vehicle. Therefore, we characterized the pharmacokinetics (PK) in Sprague-Dawley rats following the administration of three different oral formulations containing 10 mg/kg Δ8-THC: a translucent liquid nanoemulsion, a reconstituted powder nanoemulsion, and a medium chain triglyceride (MCT) oil solution for comparison. Δ8-THC was also administered intravenously at 0.6 mg/kg. Plasma samples were quantified for Δ8-THC and two metabolites, 11-hydroxy-Δ8-THC (11-OH-Δ8-THC) and 11-carboxy-Δ8-THC (COOH-Δ8-THC). Non-compartmental PK parameters were calculated, and a PK model was developed based on pooled data. Despite a smaller median droplet size of the translucent liquid nanoemulsion (26.9 nm) compared to the reconstituted powder nanoemulsion (168 nm), the PK was similar for both. The median Tmax values of Δ8-THC for the nanoemulsions (0.667 and 1 h) were significantly shorter than the median Tmax of Δ8-THC in MCT oil (6 h). This resulted in an approximately 4-fold higher Δ8-THC exposure over the first 4 h for the nanoemulsions relative to the MCT oil solution. The active 11-OH-Δ8-THC metabolite followed a similar pattern to Δ8-THC. The non-compartmental bioavailability estimates of Δ8-THC for the nanoemulsions (11-16.5%) were lower than for the MCT oil solution (>21.5%). However, a model-based analysis indicated similar bioavailability for all three oral formulations. These results demonstrate favorable absorption properties of both nanoemulsions, despite the difference in droplet sizes, compared to an MCT oil formulation.

Development of turbocharged engine bench test adapted to multiple driving cycles for lubricants fuel economy

Aimed to more truly and stably measure the fuel economy of a vehicle under different driving cycles, simultaneously reduce prime cost and short experimental period. An engine fuel economy test method and bench which could adapt to multiple cycle conditions was developed. The fuel economy test of a certain SUV under NEDC/WLTC was carried out, and the transient operating parameters of the engine were collected. The engine fuel economy test bench was established and accurately controlled according to transient parameters. The FEI of five different formulations of engine oils was tested. The results indicate that the actual bench parameters are in good agreement with the target transient parameters. Multiple FC measurements of baseline oil and multiple FEI measurements of high reference oil show that the engine bench has good repeatability. The data fluctuation degree of bench test is obviously smaller than that of vehicle test. The correlation coefficients of comprehensive FEI between bench test and vehicle test are 95.25% (NEDC) and 96.39% (WLTC). It means that the bench test can completely replace the vehicle test for fuel economy analysis. The FEI of No.3 oil which has the best fuel improvement are 1.888% (NEDC) and 1.248% (WLTC) respectively. Compared with the vehicle test, the engine bench testing can save 75% of the time. The fuel economy bench and test methods are also suitable for the verification of fuel economy improvement of other engine optimization measures under different driving cycles. The development period of engine technologies can be shortened, and the test cost can be reduced.

Formulation and Evaluation of Herbal Hair Oil

Herbal preparations always have less or no side effects compared to synthetic preparations. Pharmaceutical factories are used to manufacture and produce countless medicines. In addition, herbs are used to beautify the body in the preparation of cosmetics, flavors and dyes. The purpose of this review is to study the parameters regarding Formulation of herbal hair oil, using scientific research to make herbal hair oils using herbal ingredients like amla, hibiscus, curry. leaves, coconut oil. Based on the above observation, a crude herbal mixture was prepared in the form of herbal hair oil using the boiling method. The preparation has anti-hair loss and other useful properties such as anti-dandruff effect, improves blood circulation of the scalp and roots, reduces hair pigmentation, anti-fungal effect, reduces hair graying. The formulated vegetable oil was evaluated and parameters such as acid content, viscosity, saponification value pH, skin irritation etc. were determined and described in this paper.

Nanoemulsion-based plant essential oil formulations: in vitro evaluation of pesticidal activity against ectoparasites in poultry

Ectoparasite infestations significantly impact the health and productivity of poultry. Chemical applications, although common for pest control, lead to pesticide residues and parasite resistance in poultry. Nanoemulsion-based plant essential oil formulations (NEOFs) provide a promising alternative for controlling poultry ectoparasites. This study aimed to assess the efficacy of NEOFs from clove, cinnamon, and turmeric essential oils (EOs) against ectoparasites, Menopon gallinae and Megninia ginglymura, under laboratory conditions. The toxicity and repellent properties of the NEOFs were examined, with the major chemical compounds of the EOs analyzed using chromatography mass spectrometer. Results identified eugenol as the dominant component in clove and cinnamon EOs (84.60 and 75.19%, respectively), while turmerone (68.46%) was the major compound in turmeric EO. NEOFs with clove:cinnamon:turmeric ratios of 4:0:0, 2:2:0, and 2:0:2 had particle size of 20.76 nm, 20.66 nm, and 89.56 nm, respectively, while those based on eugenol and turmerone standards had sizes <21.0 nm. In addition, NEOFs at 0.3% concentration with ratios of 4:0:0 and 2:2:0 achieved full control of both ectoparasites. These formulas demonstrated exceptional potency in exterminating ectoparasites, with LC50 and LC90 at <0.160 and <0.250%, respectively, 6 h after treatments. Furthermore, both NEOFs showed higher repellence responses in M. gallinae compared to M. ginglymura. The toxicities of these NEOFs were comparably effective against both parasites, showing no significant difference compared with chemical insecticide treatment. Therefore, further research will explore the practicality of using clove and cinnamon-derived NEOFs under farm conditions.

30 Microbiome Manipulation to Reduce Methane Emission in Beef Cattle

Abstract Among the major sources of methane production, ruminants account for a considerable fraction of the anthropogenic methane produced. Thus, minimizing methane emission in intensive and extensive cattle production systems while maintaining/increasing performance of animals will have a significant impact on the environment and will help develop a sustainable carbon-based market system. We believe that developing science-based dietary intervention strategies using feed additives to manipulate rumen microbial communities is a viable strategy to reduce greenhouse gas emissions. Here we show the potential impact of using an essential oil formulation to reduce methane emissions in cattle. In this study, we used in-vitro fermentation experiments to evaluate the impact of the essential oil mix in reducing methane emissions. Additionally, we evaluated microbial community changes in the presence and absence of the essential oil mix to understand microbial changes that lead to reduced methane emissions. The in-vitro fermentation experiments demonstrated a significant decrease in methane emission in the essential oil mix compared with the control with no essential oil (P &amp;lt; 0.05). This decrease in methane was greater than 50%. Following in-vitro fermentation for 48 hours, the resulting inoculum was evaluated for microbial community changes using 16S rDNA sequencing. Compared with the control, the essential oil mix containing bottles were greater in Anaerovibrio and Succinivibrio and had a reduced abundance of Anaeroplasma and Prevotellaceae at the genus level. Furthermore, the essential oil mix tubes were plated to isolate members that were enriched in this treatment. The isolates obtained include Lysinibacillus halotolerans and Lysinibacillus boronitolerans. Such isolates may have the potential to be effective direct-fed microbial to reduce methane emission. Here we show the potential of the essential oil mix identified to reduce methane invitro and we have an animal study planned for the near future.

Alternative locust control with a dilutable linseed oil emulsion

AbstractLocust swarm control is still a main topic in agriculture and is often based on the extensive use of chemical agents that can be problematic for the environment and human health. Currently, only a few alternative control agents are available on the market, such as neem oil, the fungus Metarhizium sp., and the microsporidian Paranosema locustae. In this study, we improved the formulation of a botanical insecticide that is based on linseed oil and was found to be effective against the desert locust, Schistocerca gregaria. To make sure that linseed oil is most effective, we first tested several natural plant oils in a comparative laboratory study. Linseed oil performed best and resulted in 100% mortality within only 2 days after a single spray treatment. However, this linseed oil formulation contains three expensive essential oils, thus we further improved it to avoid costly essential oils. A much lower concentration of linseed oil was also found to be highly effective and killed adult S. gregaria within 3 days in an experiment performed under semifield conditions. Furthermore, a concentrated stock solution of this botanical insecticide was developed to increase stability and reduce shipping costs in areas where water for dilution is available. Mechanical treatment, applied during the preparation of this linseed oil emulsion, resulted in the formation of micro‐colloids, which prevent the separation of phases and enable 1:16 dilution with water containing bicarbonate. Interestingly, only 24 h after single spray treatment, locusts became immobile and most of them were unable to jump, which would make them easy prey for natural enemies. Later, insects died due to the hardening of the linseed oil emulsion. This novel linseed oil emulsion is harmless for humans, rather easy to produce, and remains stable over weeks in its concentrated form, which suggests that it is promising alternative agent for locust control.

A Review on Oil-Soluble Polyisobutylene-Based Dispersant for Colloidal Stabilization

Oil soluble polymeric-based dispersants have been extensively used in engine oil lubrication formulation due to their inherent properties, such as modifiable viscosity, compatibility, and effectiveness. However, the underlying mechanism of how the dispersant stabilizes soot particles in engine oil is still not fully understood, and discovering this mechanism is crucial for engine oil formulation technology. This review discusses the interactions between colloidal particles induced by two PIBSA-derived dispersants, namely PIBSI and PIBSAE. The effectiveness of these dispersants in stabilizing colloidal particles in oil systems depends on the chemical functional groups present on the main chain. The spectrum of colloidal interactions, ranging from Derjaguin, Landau, Verwey and Overbeek (DLVO) to non-DLVO theory, is predominantly influenced by the equilibrium between dispersant concentration and the overall system viscosity. This phenomenon can eventually reverse colloidal stabilization and result in more serious issues, such as engine wear and tear.

Efficacy of Sesame Oil and mustard Oil Formulations against Red Spider Mite of Tea

Crude formulations of sesame and mustard oil at 0.5%, 0.75% and 1% concentration with or without the addition of cow urine were assessed against red spider mite, Oligonychus coffeae (Nietner) in the laboratory. Efficacy tests on oviposition rate, egg hatchability, mortality of nymph and adult mites proved that sesame oil 1%, with or without the addition of cow urine was found to be effective in reducing the rate oviposition and egg hatchability of mites and was at par with the formulation prepared from commercial neem (1 : 1500). Formulations of sesame oil at the rate of 0.75% and 1% with or without cow urine were found to be highly effective for mortality of nymphs and adults of red spider mite respectively which were at par with the formulation prepared from commercial neem.

ANTIFUNGAL ACTIVITY AND SYNERGISM OF Allium sativum, Zingiber officinale, AND Citrus limon peel ESSENTIAL OILS AGAINST Tinea capitis

The burden of Tinea infections, common dermatologic fungal diseases remains high globally, especially in Africa. This is sustained mainly by the emergence of resistance to current antifungal drugs in use. Alternative treatment and preventive measures need to be sought to eradicate these infections. Antifungal activity and synergism of garlic in combination with ginger and lemon peel essential oils against Tinea capitis is assessed using inhibition assays. Ginger, lemons, and garlic samples were randomly collected from the Nakuru town market in Nakuru County, Kenya. They were identified by a botanist and then extracted and, analyzed. Antifungal activity against Tinea capitis and synergism among extracts were assessed by the disk diffusion method and minimum inhibitory concentration (MIC), respectively. The average essential oil yield for ginger, lemon, and garlic was 22%, 20%, and 16%, respectively. Ginger, lemon, and garlic essential oils depicted a comparable antifungal activity against Tinea capitis isolates (P value &gt; 0.05). The combined essential oils formulation of ginger, lemon, and garlic showed the highest activity compared to single extracts (P &gt; 0.05). The MIC for the combined essential oils was 6.25 mg/ml. A combination of the three extracts acts in synergy against the Tinea isolates. The rate of inhibition was directly proportional to the concentration of the extracts. Ginger, lemon, and garlic are sources of molecules that act in synergy in controlling Tinea spp infections. They can be leveraged to support the Ministry of Health in achieving its universal healthcare goal.

Analyzing the Impact of Fly Ash Additive Ratio on Lubricant Properties

Preventing surface damage is crucial for optimal machine performance, with lubricants and additives playing a vital role in achieving this objective. This study specifically focuses on evaluating the influence of fly-ash additives on the wear resistance of machine components when incorporated into lubricant oil. The experiments were conducted following ASTM standard operating conditions, utilizing the four-ball wear test to measure the scratch width and weight loss of balls using different lubricant oil formulations, including 0, 0.1%, 0.5%, 0.75%, and 1% additive. The findings demonstrate that the inclusion of 0.5% fly ash additive in the lubricant oil results in a significant reduction in both scratch width and weight loss of the balls. However, it should be noted that higher additive ratios may lead to increased scratch width and weight loss due to the agglomeration of the fly ash particles on the sliding surfaces. To achieve optimal effectiveness in reducing friction and wear, it is recommended to carefully control the content of fly ash within an appropriate range. Furthermore, this study highlights the width of scratches on balls as a reliable indicator for assessing the anti-wear properties of oils. The insights gained from this research offer valuable guidance to manufacturers in the selection of suitable anti-wear oils for specific applications. Further investigations could explore the impact of different lubricants and additive ratios to identify the most appropriate lubrication parameters. Overall, this study contributes to a better understanding of the effects of fly ash additives on the performance of lubricant oil and provides practical guidance for optimizing lubrication strategies in diverse industrial contexts.