Formation Of Assemblies Research Articles

Unprecedented ROP of quinazolinones to polyacylamidines using a cesium catalyst.

Unprecedented ring-opening polymerization of quinazolinones to produce novel polyacylamidines, led by a unique cooperation between a cesium metal center and imino-phosphanamidinate ligand, was developed. Morphological studies revealed the formation of a unique macromolecular assembly producing nanofibers in the absence of a templating agent with excellent control of molecular weights and polydispersity index.

Functionalising silk hydrogels with hetero- and homotypic nanoparticles.

Despite many reports detailing silk hydrogels, the development of composite silk hydrogels with homotypic and heterotypic silk nanoparticles and their impact on material mechanics and biology have remained largely unexplored. We hypothesise that the inclusion of nanoparticles into silk-based hydrogels enables the formation of homotropic and heterotropic material assemblies. The aim was to explore how well these systems allow tuning of mechanics and cell adhesion to ultimately control the cell-material interface. We utilised nonporous silica nanoparticles as a standard reference and compared them to nanoparticles derived from Bombyx mori silk and Antheraea mylitta (tasar) silk (approximately 100-150 nm in size). Initially, physically cross-linked B. mori silk hydrogels were prepared containing silica, B. mori silk nanoparticles, or tasar silk nanoparticles at concentrations of either 0.05% or 0.5% (w/v). The initial modulus (stiffness) of these nanoparticle-functionalised silk hydrogels was similar. Stress relaxation was substantially faster for nanoparticle-modified silk hydrogels than for unmodified control hydrogels. Increasing the concentrations of B. mori silk and silica nanoparticles slowed stress relaxation, while the opposite trend was observed for hydrogels modified with tasar nanoparticles. Cell attachment was similar for all hydrogels, but proliferation during the initial 24 h was significantly improved with the nanoparticle-modified hydrogels. Overall, this study demonstrates the manufacture and utilisation of homotropic and heterotropic silk hydrogels.

Probing the hierarchical dynamics of DNA-sperm nuclear transition protein complexes through fuzzy interaction and mesoscale condensation.

Nuclear transition protein TNP1 is a crucial player mediating histone-protamine exchange in condensing spermatids. A unique combination of intrinsic disorder and multivalent properties turns TNP1 into an ideal agent for orchestrating the formation of versatile TNP-DNA assemblies. Despite its significance, the physicochemical property and the molecular mechanism followed by TNP1 for histone replacement and DNA condensation are still poorly understood. This study reports the first-time in vitro expression and purification of human TNP1 and investigates the hierarchical dynamics of TNP1-DNA interaction using a combination of computational simulations, biochemical assays, fluorescence imaging, and atomic force microscopy. We explored three crucial facets of TNP1-DNA interactions. Initially, we delve into the molecular binding process that entails fuzzy interactions between TNP1 and DNA at the atomistic scale. Subsequently, we analyze how TNP1 binding affects the electrostatic and mechanical characteristics of DNA and influences its morphology. Finally, we study the biomolecular condensation of TNP1-DNA when subjected to high concentrations. The findings of our study set the foundation for comprehending the potential involvement of TNP1 in histone replacement and DNA condensation in spermatogenesis.

Non-thermal plasma modulated l-tyrosine self-assemblies: a potential avenue for fabrication of supramolecular self-assembled biomaterials.

Aromatic amino acids (AAs) have garnered particular interest due to their pivotal roles in numerous biological processes and disorders. Variations in AA self-assembly not only affect protein structures and functions, but their non-covalent interactions such as hydrogen bonding, van der Waals forces, and π-π stacking, yield versatile assemblies vital in bio-inspired material fabrication. Tyrosine (Tyr), a non-essential aromatic amino acid, holds multifaceted significance in the body as a protein building block, neurotransmitter precursor, thyroid hormone contributor, and melanin synthesis regulator. The proficiency of Cold Atmospheric Plasma (CAP) in generating a spectrum of reactive oxygen and nitrogen species has spurred innovative research avenues in the studies of biomolecular components, including its potential for targeted cancer cell ablation and biomolecule modification. In this work, we have assessed the chemical as well as the structural changes in Tyrosine-derived self-assembled structures arising from the CAP-induced reactive species. For a comprehensive understanding of the mechanism, different treatment times, feed gases, and the role of solvent acidification are compared using various spectroscopic and microscopic techniques. LC-ESI-QQQ mass spectra unveiled the emergence of oxygenated and nitro derivatives of l-tyrosine following its interaction with CAP-derived ROS/RNS. SEM and TEM images demonstrated an enhanced surface size of self-assembled structures and the formation of novel nanomaterial-shaped assemblies following CAP treatment. Overall, this study aims to explore CAP's interaction with a single-amino acid, hypothesizing the creation of novel supramolecular structures and scrutinizing CAP-instigated transformations in l-tyrosine self-assembled structures, potentially advancing biomimetic-attributed nanomaterial fabrication which might present a novel frontier in the field of designing functional biomaterials.

Characterization of amyloid-like metal-amino acid assemblies with remarkable catalytic activity.

While enzymes are potentially useful in various applications, their limited operational stability and production costs have led to an extensive search for stable catalytic agents that will retain the efficiency, specificity, and environmental-friendliness of natural enzymes. Despite extensive efforts, there is still an unmet need for improved enzyme mimics and novel concepts to discover and optimize such agents. Inspired by the catalytic activity of amyloids and the formation of amyloid-like assemblies by metabolites, our group pioneered the development of novel metabolite-metal co-assemblies (bio-nanozymes) that produce nanomaterials mimicking the catalytic function of common metalloenzymes that are being used for various technological applications. In addition to their notable activity, bio-nanozymes are remarkably safe as they are purely composed of amino acids and minerals that are harmless to the environment. The bio-nanozymes exhibit high efficiency and exceptional robustness, even under extreme conditions of temperature, pH, and salinity that are impractical for enzymes. Our group has recently also demonstrated the formation of ordered amino acid co-assemblies showing selective and preferential interactions comparable to the organization of residues in folded proteins. The identified bio-nanozymes can be used in various applications including environmental remediation, synthesis of new materials, and green energy.

Interaction of full-length Tau with negatively charged lipid membranes leads to polymorphic aggregates.

The Tau protein is implicated in various diseases collectively known as tauopathies, including Alzheimer's disease and frontotemporal dementia. The precise mechanism underlying Tau pathogenicity remains elusive. Recently, the role of lipids has garnered interest due to their implications in Tau aggregation, secretion, uptake, and pathogenic dysregulation. Previous investigations have highlighted critical aspects: (i) Tau's tendency to aggregate into fibers when interacting with negatively charged lipids, (ii) its ability to form structured species upon contact with anionic membranes, and (iii) the potential disruption of the membrane upon Tau binding. In this study, we examine the disease-associated P301L mutation of the 2N4R isoform of Tau and its effects on membranes composed on phosphatidylserine (PS) lipids. Aggregation studies and liposome leakage assays demonstrate Tau's ability to bind to anionic lipid vesicles, leading to membrane disruption. Attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR) reveals the accumulation of Tau on the membrane surface without protein insertion, structuration, or lipid removal. Plasmon waveguide resonance (PWR) demonstrates a strong binding of Tau on PS bilayers with an apparent Kd in the micromolar range, indicating the deposition of a thick protein layer. Atomic force microscopy (AFM) real-time imaging allows the observation of partial lipid solubilization and the deposition of polymorphic aggregates in the form of thick patches and fibrillary structures resembling amyloid fibers, which could grow from a combination of extracted anionic phospholipids from the membrane and Tau protein. This study deepens our understanding of full-length Tau's multifaceted interactions with lipids, shedding light on potential mechanisms leading to the formation of pathogenic Tau assemblies.

Photoacid-macroion assemblies: how photo-excitation switches the size of nano-objects.

Electrostatic self-assembly of photoacids with oppositely charged macroions yields supramolecular nano-objects in aqueous solutions, whose size is controlled through light irradiation. Nano-assemblies are formed due to electrostatic attractions and mutual hydrogen bonding of the photoacids. Irradiation with UV light leads to the deprotonation of the photoacid and, consequently, a change in particle size. Overall, the hydrodynamic radii of the well-defined photoacid-macroion nano-objects lie between 130 and 370 nm. For a set of photoacids, we determine the acidity constants in the ground and excited state, discuss the sizes of photoacid-macroion nano-objects (by dynamic and static light scattering), their composition and the particle shapes (by small-angle neutron scattering), and relate their charge characteristics to size, structure and shape. We investigate the association thermodynamics and relate nanoscale structures to thermodynamics and, in turn, thermodynamics to molecular features, particularly the ionization energy of the photoacid hydroxyl group proton. Structure-directing effects completely differ from those for previously investigated systems, with hydrogen bonding and entropic effects playing a major role herein. This combined approach allows developing a comprehensive understanding of assembly formation and photo-response, anchored in molecular parameters (pKa, ionization energy, substituent group location), charge characteristics, and the association enthalpy and entropy. This fundamental understanding again paves the way for tailoring application solutions with novel photoresponsive materials.

AIE‐Switching and Enantioselective Reactivity at Jammed Liquid‐Liquid Interface

AbstractThe jammed liquid‐liquid interface offers an elegant approach to achieve non‐equilibrium shapes of liquids. The interfacial jamming subsequently brings about formation of 2D “solid‐like” assembly. In this work, biphasic reaction between a perylenediimide based luminogen benzoperylenediimide monoanhydride (Bp(Im)2MA) and diamines are demonstrated that rendered amide bond formation and in turn amide nanoconjugates across the oil‐water interface. Amide nanoconjugates formed with different diamines showed diamine alkyl chain length dependent varied interfacial properties and sizes. Jamming of the interface is judiciously utilized to induce aggregation of amide nanoconjugates which successfully established macroscopic Aggregation Induced Emission‐switching (AIE‐switching) behavior. Further, the versatility of this approach is extended to analyze the reactivity of chiral amino acids. The reaction between the Bp(Im)2MA luminogen and chiral amino acids exhibits macroscopic enantioselectivity at jammed interface via diverse surface coverage of the amino acids‐based amide nanoconjugates. The formation of discrete nanoscopic amide interfacial assembly for each of the L‐ and D‐ amino acids isomers is corroborated with Atomic Force Microscopy (AFM) images. This study extends a fascinating pathway to aid in understanding and fabrication of structurally diverse jammed interfaces and aggregation of organic molecules across an oil‐water interface.

Thermophysical properties of suspensions with [NI₃(μ₃-PPZA)₄CL₂] metal string complex microparticles

The study investigated the thermophysical properties of suspensions containing Ni₃(μ₃-ppza)4Cl₂ metal string complex (MSC) microparticles in aqueous glycerol solutions. The results showed that the use of microparticles of monocrystalline metal string complexes Ni₃(μ₃-ppza)4Cl₂ and Ni₅(μ₅-pppmda)4Cl₂ leds to the highest thermal conductivity enhancements and a decrease in freezing point. A comparative analysis of thermal conductivity enhancements of suspensions with micro- and nanoparticles was also conducted. Compared to the base fluid, at 5% volume fraction Ni₃-water-glycerol showed a 72% increase in thermal conductivity, while Cu-water-glycerol and Ni5-water-glycerol showed enhancements of 53% and 47%, respectively. The study suggests that the higher stability of suspensions with MSC microparticles, due to the formation of hydrogen bonds between the organic fragments of particles and water molecules, thier lower density and the formation of particle assemblies, is responsible for the significant thermal conductivity enhancement compared to nanofluids. The colloidal structure of suspensions with MSC microparticles greatly affects their thermophysical properties. Keywords: nanofluid, microfluid, metal string complex, thermal conductivity, suspension.

Malaria parasite centrins can assemble by Ca2+-inducible condensation.

Centrins are small calcium-binding proteins that have a variety of roles and are universally associated with eukaryotic centrosomes. Rapid proliferation of the malaria-causing parasite Plasmodium falciparum in the human blood depends on a particularly divergent and acentriolar centrosome, which incorporates several essential centrins. Their precise mode of action, however, remains unclear. In this study calcium-inducible liquid-liquid phase separation is revealed as an evolutionarily conserved principle of assembly for multiple centrins from P. falciparum and other species. Furthermore, the disordered N-terminus and calcium-binding motifs are defined as essential features for reversible biomolecular condensation, and we demonstrate that certain centrins can form co-condensates. In vivo analysis using live cell STED microscopy shows liquid-like dynamics of centrosomal centrin. Additionally, implementation of an inducible protein overexpression system reveals concentration-dependent formation of extra-centrosomal centrin assemblies with condensate-like properties. The timing of foci formation and dissolution suggests that centrin assembly is regulated. This study thereby provides a new model for centrin accumulation at eukaryotic centrosomes.

The Design of Supramolecular Assemblies with Metal Salt as Precursors Enables The Growth of Stable Polymeric Carbon Nitride Photoanodes

AbstractPolymeric carbon nitrides (CN) have gained significant interest as photoanodes in photoelectrochemical cells (PEC). A widely researched approach for synthesizing CN films with controlled optical and photoelectrochemical properties relies on using supramolecular assemblies as the precursors for thermal polymerization over a transparent conductive substrate. However, the formation of supramolecular assemblies is highly dependent on the temperature and solubility in a given solvent, limiting the full potential of this method. Moreover, the intercalation of metal ions is challenging due to the use of polar solvents. Here, this study shows a new way of synthesizing supramolecular assemblies with metal ions using a solvothermal approach. The solvent, monomer composition, salt quantity, reaction temperature, and film thickness are varied in this study. As a result, well‐attached, uniform CN films with good optoelectronic properties are achieved. The synthesized photoactive CN films exhibit very low onset potentials and reach ≈0.13, ≈0.15, and 0.30 ± 0.01 mA cm−2 photocurrents in 0.1 m phosphate buffer (neutral) solution, 0.1 m KOH(aq) (basic) solution, and 0.1 m KOH solution containing 10 vol.% triethanolamine as the hole scavenger, respectively.

Unveiling the secrets of unusual long-pitch periodic assembly of poly(ʟ-Lactide) ring-banded spherulites

Although polymer physicists have conducted extensive research over the decades, the molecular assembly in lamellae of ring-banded spherulites (RBS) remains a puzzle that has yet to be solved. Nonetheless, a breakthrough has occurred in this field where long-pitch banded rings made of a model poly(ʟ-lactide) (PLLA) were examined using advanced synchrotron X-ray micro-focused diffraction techniques. Through the microbeam diffraction mapping and microscopy 3D dissection morphology, the periodic banded structure of RBS is composed of lamellae that self-assemble as structural gratings. Furthermore, a comparison of optical micrograph image with the mapping results revealed the sequential arrangement and orientation of lamellae in these gratings. These extensive experimental findings now provide a comprehensive and novel explanation for the formation of long-pitch lamellar assembly in RBS. This new methodology is adaptable to a wide variety of polymers and allows for the analysis of spherulites displaying periodically self-assembled patterns. The novel methodology employed here has a versatile applicability for a diverse range of polymers. This technique can be extended to analyze spherulites showcasing periodically self-assembled patterns. Such revelation provides valuable understanding into the complex structures and behaviors of polymers, and this discovery opens up new frontiers in materials science research and its practical applications.

Molecular-level transformations of biomass burning-derived water-soluble organic carbon during dark aqueous OH oxidation: Insights from absorption, fluorescence, high-performance size exclusion chromatography and high-resolution mass spectrometry analysis

Biomass burning (BB) releases large amounts of water-soluble organic carbon (WSOC), which would undergo heterogenous oxidation processes that induce transformations in both molecular structures and compositions within BB WSOC. This study designed an aqueous oxidation initiated by OH radicals in the absence of light for WSOC extracted from smoke particles generated by burning of corn straw and fir wood. The BB WSOC was comprehensively characterized using a combination of UV–visible spectra, excitation-emission matrix fluorescence in conjunction with parallel factor analysis (EEM-PARAFAC), high-performance size exclusion chromatography (HPSEC), and high-resolution mass spectrometry (HRMS) analyses. Over the course of oxidation, both chromophores and fluorophores exhibited gradual decreases. Moreover, EEM-PARAFAC revealed a preferential degradation of larger-sized protein-like/phenol-like organic matters, accompanied by the accumulation and/or formation of humic-like substances in aged BB WSOC. HPSEC analysis showed notable changes in molecular weight (MW) distributions for both types of BB WSOC during oxidation. Specifically, high MW species (>1 kDa) displayed a tendency to form along with oxidation, possibly attributed to the formation of assemblies via intermolecular weak forces. After oxidation, evidence of CHO compound degradation and enrichment/formation of CHON compounds was observed for both types of BB WSOC. Remarkably, the resistant, degraded and produced molecules for BB WSOC were dominated by CHO (38–73 %) and lignin-like molecules (41–47 %), suggesting diverse responses to oxidation within these two groups. Furthermore, polyphenols experienced selective degradation, while CHON, aliphatic and poly-aromatic molecules tended to form during the oxidation process for both types of BB WSOC. In summary, this study provides a comprehensive understanding of the molecular-level transformations undergone by BB WSOC during dark aqueous OH oxidation. The findings significantly contribute to our insights into atmospheric evolution of BB WSOC, thereby playing a crucial role in accurately assessing their effects within climate models and informing policy decisions.

CIZ1 in Xist seeded assemblies at the inactive X chromosome.

There is growing evidence that X-chromosome inactivation is driven by phase-separated supramolecular assemblies. However, among the many proteins recruited to the inactive X chromosome by Xist long non-coding RNA, so far only a minority (CIZ1, CELF1, SPEN, TDP-43, MATR3, PTBP1, PCGF5) have been shown to form Xist-seeded protein assemblies, and of these most have not been analyzed in detail. With focus on CIZ1, here we describe 1) the contribution of intrinsically disordered regions in RNA-dependent protein assembly formation at the inactive X chromosome, and 2) enrichment, distribution, and function of proteins within Xist-seeded assemblies.

Micellar-enhanced ultrafiltration with a novel modified membrane for removal of arsenate and emerging contaminants from water

Toxic metals and Antibiotics appear in water sources have potential threat or adverse effect on health of human being and other living species. The present paper reports a novel micellar-enhanced ultrafiltration process could efficiently remove the toxic metals like arsenate and antibiotics like Levofloxacin and Sulfamethazine from water. Contaminants removal by conventional ultrafiltration membrane is very low. Removal up to 92.8 %, 84.1 % and 95.3 % of Arsenate (AsO43-), Levofloxacin (LF) and Sulfamethazine (SMT) respectively was achieved by micellar-enhanced ultrafiltration with cationic surfactant Benzalkonium chloride as compared to conventional ultrafiltration, which rejected 91.4 %, 8.2 % and 7.9 % of Arsenate, LF, and SMT respectively. Hydrodynamic size of the molecule trapped by micelle enhances significantly helping the separation. The ultrafiltration membrane was modified with copper-chitosan supramolecular assembly and found that molecular weight cut-off decreased because of supramolecular assembly formation. Mechanical properties such as tensile stress and elongation at break were evaluate and it was found that the membrane had significantly higher tensile strength viz. up to 60.9 MPa as compared to virgin Polysulfone membrane 12.7 MPa. Thus, the present work paves the way for future work in the area for removal different contaminants. by micellar-enhanced ultrafiltration.

Modulating the Photoluminescence of Europium through Crystalline Assembly Formation with Gold Nanoclusters and Then Phosphate Ions.

We report delayed fluorescence enhancement of europium (Eu3+) ions through complexation with ligand-stabilized gold nanoclusters (Au NCs). The different Eu3+-centric emissions following complexation with Au NCs exhibited selective augmentation in the spectral lines attributed to the 5D0 → 7FJ transitions. The photoluminescence (PL) properties, including delayed Eu emission, from each component could be modulated through further functionalization of phosphate ions (Pi), leading to crystallization. The assembled crystalline structure of europium-containing Au NCs (Eu Au NCs) was corroborated by selected area electron diffraction analyses and high-resolution transmission electron microscopy analyses. On the basis of PL measurements and other experimental evidence, the two different lifetimes arising from the components, prompt emission of Au NCs and delayed emission of Eu3+, were affected in the assembled nanostructure. Such a design offers the possibility of developing an optical system by conjugating molecular NCs and atomic luminescent probes that has potential uses.

Solid-Phase Electrosynthesis.

ConspectusThe significance of the new synthetic approach is that it can overcome the limitations of conventional methods and produce previously inaccessible polymer structures and materials. The solid-phase synthesis developed by Merrifield in 1964 is widely employed for the synthesis of biological molecules, such as peptides, nucleic acids, and oligosaccharides. Although the variety of iterative reactions available is theoretically implemented for most organic synthesis protocols, they are usually required to have high efficiency against sluggish reaction kinetics at the solid-liquid interface and process with protection and deprotection steps. Generally, unsatisfied reaction dynamics at the solid-liquid interface cannot statistically permit accurate and uniform polymer synthesis of sophisticated structures and functions within an acceptable time scale. To address this challenge, we propose the concept of solid-phase electrosynthesis, which simultaneously enables rapidly surface-initiated uniform electrosynthesis and unidirectional assembly of metallopolymers via kinetically accelerated and statistically allowed iterative growth. In particular, on a self-assembled monolayer (SAM) of the metal complex with electroactive unit A, the iterative monomer with two electroactive units A and B can be alternatively activated by oxidative and reductive potentials for A-A and B-B covalent couplings with the SAM, respectively. This enables topochemical one-by-one additions of the iterative monomers to end-on-oriented self-assembled molecules through alternative redox reactions. Each iterative step is purified by washing. Repeating the same iterative reaction enables further reaction of the unreactive sites on the SAMs and repairs the morphology defects, thereby ensuring the statistically allowed uniform synthesis and fabrication of polymer monolayers. The resulting monolayers exhibit subnanometer-uniform morphology over centimeter-sized areas with crystalline states and show thicknesses similar to theoretical molecular lengths. This demonstrates the unidirectional formation of polymer assemblies, providing a pathway for obtaining highly ordered formation of noncrystalline polymers. The length-controlled electrosynthesis of metallopolymers can be generalized for many types of organic ligands and metal species, enabling quantitative design of the composition and sequence-controlled metallopolymers with the precise relationships of structures and properties. Solid-phase electrosynthesis offers a unique approach to synthesize polymer structures and monolayers with enhanced functionality and superior physical properties, including physical density, modulus, and conductance. Through the utilization of precise and efficient iterative growth, this predictable electrosynthesis, coupled with optical and electrical monitoring, not only expands the scope of current synthetic chemistry but also paves a potential way for the automated generation of optoelectric molecular monolayers with large-area dimensional consistency and enhanced physical performance.

Photoresponsive peptide materials: Spatiotemporal control of self-assembly and biological functions.

Peptides work as both functional molecules to modulate various biological phenomena and self-assembling artificial materials. The introduction of photoresponsive units to peptides allows the spatiotemporal remote control of their structure and function upon light irradiation. This article overviews the photoresponsive peptide design, interaction with biomolecules, and applications in self-assembling materials over the last 30 years. Peptides modified with photochromic (photoisomerizable) molecules, such as azobenzene and spiropyran, reversibly photo-controlled the binding to biomolecules and nanostructure formation through self-assembly. Photocleavable molecular units irreversibly control the functions of peptides through cleavage of the main chain and deprotection by light. Photocrosslinking between peptides or between peptides and other biomolecules enhances the structural stability of peptide assemblies and complexes. These photoresponsive peptides spatiotemporally controlled the formation and dissociation of peptide assemblies, gene expressions, protein-drug interactions, protein-protein interactions, liposome deformation and motility, cytoskeleton structure and stability, and cell functions by appropriate light irradiation. These molecular systems can be applied to photo-control biological functions, molecular robots, artificial cells, and next-generation smart drug delivery materials.

Urea-Assisted Synthesis of Microspherical Hollow CeO2 Nanostructures for Supercapacitor Applications

In the present work, cerium oxide (CeO2), the most abundant and least expensive rare earth metal oxide with the capability of rapid conversion between the oxidation states of Ce+3 and Ce+4, is synthesized via a urea-assisted solvothermal method in methanol. Along with its role as a precipitating agent, urea reacted with methanol and thus initiated a series of organic reactions which are responsible for the formation of spherical layered assembly of cerium oxide leading to a multi-layered structure with high porosity. The morphology and chemical structure of the material are investigated using SEM, TEM, XRD, and FTIR spectroscopy. The porous and spherical architecture achieved here enhanced the surface area, active sites, and electrical conductivity and also introduced more diffusion pathways at the electrode/electrolyte interface, which collectively improved the performance of CeO2 as a supercapacitor electrode material. The outstanding redox characteristics of CeO2 are explored in supercapacitor applications, and the electrode exhibited a specific capacitance of 319.68 F/g at a current density of 0.5 A/g in a three-electrode configuration which proved the excellence of the present CeO2 microspheres in the field of energy storage applications.

Comparative secretome analysis reveals cross-talk between type III secretion system and flagella assembly in Pseudomonas plecoglossicida

The Gram-negative bacterium Pseudomonas plecoglossicida has caused visceral granulomas disease in several farmed fish species, including large yellow croaker (Larimichthys crocea), which results in severe economic losses. Type III secretion systems (T3SS) are protein secretion and translocation nanomachines widely employed by many Gram-negative bacterial pathogens for infection and pathogenicity. However, the exact role of T3SS in the pathogenesis of P. plecoglossicida infection is still unclear. In this study, a T3SS translocators deletion strain (△popBD) of P. plecoglossicida was constructed to investigate the function of T3SS. Then comparative secretome analysis of the P. plecoglossicida wild-type (WT) and △popBD mutant strains was conducted by label-free quantitation (LFQ) mass spectrometry. The results show that knockout of T3SS translocators popB and popD has an adverse effect on the effector protein ExoU secretion, flagella assembly, and biofilm formation. Further experimental validations also confirmed that popB-popD deletion could affect the P. plecoglossicida flagella morphology/formation, adherence, mobility, and biofilm formation. These data indicate that a cross-talk exists between the P. plecoglossicida T3SS and the flagella system. Our results, therefore, will facilitate the further under-standing of the pathogenic mechanisms leading to visceral granulomas disease caused by P. plecoglossicida.