Aptamer Folding Research Articles

Basis for ligand discrimination between ON and OFF state riboswitch conformations: The case of the SAM-I riboswitch

Riboswitches are RNA elements that bind to effector ligands and control gene expression. Most consist of two domains. S-Adenosyl Methionine (SAM) binds the aptamer domain of the SAM-I riboswitch and induces conformational changes in the expression domain to form an intrinsic terminator (transcription OFF state). Without SAM the riboswitch forms the transcription ON state, allowing read-through transcription. The mechanistic link between the SAM/aptamer recognition event and subsequent secondary structure rearrangement by the riboswitch is unclear. We probed for those structural features of the Bacillus subtilis yitJ SAM-I riboswitch responsible for discrimination between the ON and OFF states by SAM. We designed SAM-I riboswitch RNA segments forming "hybrid" structures of the ON and OFF states. The choice of segment constrains the formation of a partial P1 helix, characteristic of the OFF state, together with a partial antiterminator (AT) helix, characteristic of the ON state. For most choices of P1 vs. AT helix lengths, SAM binds with micromolar affinity according to equilibrium dialysis. Mutational analysis and in-line probing confirm that the mode of SAM binding by hybrid structures is similar to that of the aptamer. Altogether, binding measurements and in-line probing are consistent with the hypothesis that when SAM is present, stacking interactions with the AT helix stabilize a partially formed P1 helix in the hybrids. Molecular modeling indicates that continuous stacking between the P1 and the AT helices is plausible with SAM bound. Our findings raise the possibility that conformational intermediates may play a role in ligand-induced aptamer folding.

Folding Versus Charge: Understanding Selective Target Recognition by the Thrombin Aptamers

The use of nucleic acids as drugs represents a consistently growing approach. Different therapeutical strategies take advantage of the biological and biophysical properties of DNA and RNA to properly modulate activity of selected targets. A peculiar characteristic of these molecules is their structural flexibility which allows them to assume distinct foldings depending upon their sequence and/or environment. During the last twenty years this has led to the theoretical and experimental development of oligonucleotide aptamers, short sequences which can recognize a target with specificity and affinity comparable to antibodies. A leading example is represented by the Thrombin aptamer (15fTBA), a 15-mer DNA selected by its high affinity for the exosite I (fibrinogen binding site) of the coagulation factor. The very stable protein-DNA complex formation is the result of complementarities between the two macromolecules promoted by the aptamer sequence and folding as well as of electrostatic interactions generated by the charge balance at the binding site/s. Here, we investigated the relative role of these contributions and their involvement in defining the biological properties of the resulting complex. Thus we compared the Thrombin binding and inhibition properties of TBA to those of unrelated single stranded oligonucleotides. Additionally, the differences between the two protein exosites were assessed by using 29hTBA, a longer (29-mer) aptamer known to bind exosite II (heparin binding site). A subtle balance of aptamer folding and sequence is shown to cooperate with charge density for effective and selective recognition of exosite I or exosite II by TBAs.

Folding energy landscape of the thiamine pyrophosphate riboswitch aptamer

Riboswitches are motifs in the untranslated regions (UTRs) of RNA transcripts that sense metabolite levels and modulate the expression of the corresponding genes for metabolite import, export, synthesis, or degradation. All riboswitches contain an aptamer: an RNA structure that, upon binding ligand, folds to expose or sequester regulatory elements in the adjacent sequence through alternative nucleotide pairing. The coupling between ligand binding and aptamer folding is central to the regulatory mechanisms of thiamine pyrophosphate (TPP) riboswitches and has not been fully characterized. Here, we show that TPP aptamer folding can be decomposed into ligand-independent and -dependent steps that correspond to the formation of secondary and tertiary structures, respectively. We reconstructed the full energy landscape for folding of the wild-type (WT) aptamer and measured perturbations of this landscape arising from mutations or ligand binding. We show that TPP binding proceeds in two steps, from a weakly to a strongly bound state. Our data imply a hierarchical folding sequence, and provide a framework for understanding molecular mechanism throughout the TPP riboswitch family.

Moving beyond Watson–Crick models of coarse grained DNA dynamics

DNA produces a wide range of structures in addition to the canonical B-form of double-stranded DNA. Some of these structures are stabilized by Hoogsteen bonds. We developed an experimentally parameterized, coarse-grained model that incorporates such bonds. The model reproduces many of the microscopic features of double-stranded DNA and captures the experimental melting curves for a number of short DNA hairpins, even when the open state forms complicated secondary structures. We demonstrate the utility of the model by simulating the folding of a thrombin aptamer, which contains G-quartets, and strand invasion during triplex formation. Our results highlight the importance of including Hoogsteen bonding in coarse-grained models of DNA.

Comparison of a PreQ1 Riboswitch Aptamer in Metabolite-bound and Free States with Implications for Gene Regulation

Riboswitches are RNA regulatory elements that govern gene expression by recognition of small molecule ligands via a high affinity aptamer domain. Molecular recognition can lead to active or attenuated gene expression states by controlling accessibility to mRNA signals necessary for transcription or translation. Key areas of inquiry focus on how an aptamer attains specificity for its effector, the extent to which the aptamer folds prior to encountering its ligand, and how ligand binding alters expression signal accessibility. Here we present crystal structures of the preQ(1) riboswitch from Thermoanaerobacter tengcongensis in the preQ(1)-bound and free states. Although the mode of preQ(1) recognition is similar to that observed for preQ(0), surface plasmon resonance revealed an apparent K(D) of 2.1 ± 0.3 nm for preQ(1) but a value of 35.1 ± 6.1 nm for preQ(0). This difference can be accounted for by interactions between the preQ(1) methylamine and base G5 of the aptamer. To explore conformational states in the absence of metabolite, the free-state aptamer structure was determined. A14 from the ceiling of the ligand pocket shifts into the preQ(1)-binding site, resulting in "closed" access to the metabolite while simultaneously increasing exposure of the ribosome-binding site. Solution scattering data suggest that the free-state aptamer is compact, but the "closed" free-state crystal structure is inadequate to describe the solution scattering data. These observations are distinct from transcriptional preQ(1) riboswitches of the same class that exhibit strictly ligand-dependent folding. Implications for gene regulation are discussed.

HIV-integrase aptamer folds into a parallel quadruplex: A thermodynamic study

Short guanine-rich sequences have a tendency to form quadruplexes that are stabilized by G-quartets with specific cation coordination. Quadruplexes are part of telomeres at the ends of chromosomes and play an important role in the regulation of gene expression. In addition, there is a strong interest in the therapeutic and biotechnological potential of quadruplex oligonucleotides. The HIV-integrase aptamer, d(GGGT) 4, demonstrated unusually favorable van't Hoff thermodynamics, and based on NMR studies the aptamer was proposed to fold into an antiparallel structure. Here we probed an apparent discrepancy between the NMR structure and the quadruplex topology suggested by circular dichroism (CD). Systematic thermodynamic analyses of d(GGGT) 4 and variants containing sequence modifications or missing specific nucleotides are consistent with a parallel quadruplex fold. CD studies carried out over a wide concentration range did not support a possible structural transition upon increasing strand concentration. Taken together, both optical and thermodynamic studies performed here strongly support a parallel fold for the d(GGGT) 4 aptamer.

Force Spectroscopy of Add Adenine Riboswitch Aptamer Folding Reveals Multiple Intermediate and Misfolded States

Riboswitches regulate genes expression through ligand-induced conformational changes. The folding of the add adenine riboswitch was investigated by repeatedly unfolding and refolding single aptamer molecules held under tension with optical tweezers. Multiple partially-folded intermediate states were identified from force-extension curves and folding trajectories at constant force, and characterized by measuring the associated molecular contour length changes, kinetics, and energetics. These states were correlated to essential structural components and interactions in the aptamer in a hierarchical folding pathway. In particular, the transition state for unfolding the ligand-bound aptamer involved the disruption of triplex helix-junction near the adenine binding pocket. The action of this riboswitch as a translational regulator (1) is found to be determined by the thermodynamic properties of the riboswitch, not by its kinetic properties as for the similar pbuE adenine riboswitch (2). In addition to on-pathway intermediates, several off-pathway, “misfolded” states were also observed and characterized. These results extend our understanding of the mechanics of RNA structure formation, the effects of multiple folding pathways, and the relation between folding and function in riboswitches. (1) Serganov, A., Yuan, Y.R., Pikovskaya, O., Polonskaia, A., Malinina, L., Phan, A.T., Hobartner, C., Micura, R., Breaker, R.R., and Patel, D.J. Structural Basis for Discriminative Regulation of Gene Expression by Adenine- and Guanine-Sensing mRNAs. Chem. Biol. 11: 1729-1741 (2004). (2) Greenleaf, W.J., Frieda, K.L., Foster, D.A.N., Woodside, M.T. & Block, S.M. Direct Observation of Hierarchical Folding in Single Riboswitch Aptamers. Science 319, 630-633 (2008).

A quantum dot-aptamer beacon using a DNA intercalating dye as the FRET reporter: Application to label-free thrombin detection

A new quantum dot (QD)-aptamer (apt) beacon that acts by folding-induced dissociation of a DNA intercalating dye, BOBO-3(B), is demonstrated with label-free thrombin detection. The beacon, denoted as QD-apt:B, is constructed by (1) coupling of a single-stranded thrombin aptamer to Qdot 565 via EDC/Sulfo-NHS chemistry and (2) staining the duplex regions of the aptamer on QD with excess BOBO-3 before thrombin binding. When mixing a thrombin sample with QD-apt:B, BOBO-3 is competed away from the beacon due to target-induced aptamer folding, which then causes a decrease in QD fluorescence resonance energy transfer (FRET)-mediated BOBO-3 emission and achieves thrombin quantitation. In this work, the effects of Mg 2+, coupling time, and aptamer type on the beacon's performances are investigated and discussed thoroughly with various methods, including transmission electron microscopy (TEM), dynamic light scattering (DLS), and two-color differential gel electrophoresis. Using the best aptamer beacon (HTQ37), we attain highly specific and wide-range detection (from nM to μM) of thrombin in buffer, and the beacon can sense nM-range thrombin in 15% diluted serum. Compared to the reported QD aptamer assays, our method is advantageous from the aspect of using a simple sensory unit design without losing the detection sensitivity. Therefore, we consider the QD-apt:B beacon a potential alternative to immuno-reagents and an effective tool to study nucleic acid folding on QD as well.

Dissecting electrostatic screening, specific ion binding, and ligand binding in an energetic model for glycine riboswitch folding

Riboswitches are gene-regulating RNAs that are usually found in the 5'-untranslated regions of messenger RNA. As the sugar-phosphate backbone of RNA is highly negatively charged, the folding and ligand-binding interactions of riboswitches are strongly dependent on the presence of cations. Using small angle X-ray scattering (SAXS) and hydroxyl radical footprinting, we examined the cation dependence of the different folding stages of the glycine-binding riboswitch from Vibrio cholerae. We found that the partial folding of the tandem aptamer of this riboswitch in the absence of glycine is supported by all tested mono- and divalent ions, suggesting that this transition is mediated by nonspecific electrostatic screening. Poisson-Boltzmann calculations using SAXS-derived low-resolution structural models allowed us to perform an energetic dissection of this process. The results showed that a model with a constant favorable contribution to folding that is opposed by an unfavorable electrostatic term that varies with ion concentration and valency provides a reasonable quantitative description of the observed folding behavior. Glycine binding, on the other hand, requires specific divalent ions binding based on the observation that Mg(2+), Ca(2+), and Mn(2+) facilitated glycine binding, whereas other divalent cations did not. The results provide a case study of how ion-dependent electrostatic relaxation, specific ion binding, and ligand binding can be coupled to shape the energetic landscape of a riboswitch and can begin to be quantitatively dissected.

DNA aptamer folding on magnetic beads for sequential detection of adenosine and cocaine by substrate-resolved chemiluminescence technology

We have developed a new aptamer-based chemiluminescence (CL) biosensing platform for the sequential detection of two small molecules as exemplified by adenosine and cocaine. Each biosensing platform comprises NH(2)-functionalized capture DNA immobilized on magnetic beads; this can hybridize with one end of the aptamer. A corresponding reporter DNA probe labeled with either digoxigenin or biotin on its 5'-terminus recognizes the other end of the aptamer. The target compounds adenosine or cocaine act as specific competitors to aptamer-reporter DNA binding, and the corresponding aptamers preferentially form target-aptamer complexes. This results in detachment of the reporter DNA probe from the magnetic beads, with more target molecules resulting in less reporter DNA probe remaining on the beads. Those left are sequentially detected by using substrate-resolved anti-digoxigenin-alkaline phosphatase and streptavidin-horseradish peroxidase. Experimental results confirm that this CL immunosensing platform has good sensitivity with detection limits of 5.2 x 10(-9) M and 3.2 x 10(-9) M for adenosine and cocaine, respectively. Because it is straightforward to adapt this strategy to detect a spectrum of small molecules by using different aptamers, this method may offer a new direction in designing high-performance CL aptasensors for sensitive and sequential determination of a limited number of small molecules.

Multivalent DNA Aptamer-Based Therapeutic Agents for Lymphoma and Leukemia.

Abstract 2711Poster Board II-687Non-Hodgkins lymphomas affect 450,000 patients in the United States and even with recent advances in antibody-based therapies; more than 20,000 people will die of their disease annually. The goal of this work was to develop a high affinity, stable aptamer selective for B-cell leukemias and lymphomas. Aptamers are small DNA molecules that have the ability to bind to proteins with high affinity and specificity. They are also ideal candidates as therapeutic carriers. Aptamer binding is based on the ability of small oligonucleotide polymers (typically 20–80mers) to fold into unique three-dimensional structures that can interact with a specific target. Based on nature of this interaction, aptamers could be considered to be antibody analogs. Compared to antibodies however, one of the inherent properties of aptamers is that their small size (typically 10–20,000 daltons for aptamers vs 150,000 daltons for antibodies,) might address some difficult pharmacologic issues of antibodies, which penetrate slowly into tumors and clear the blood slowly. Recently, the TDO5 aptamer was identified and it was found to bind to membrane bound human IgM, a component of the BCR complex in B-Cell neoplasms. In contrast to currently available monoclonal antibodies, TD05 binds to membrane bound human IgM only and not with soluble IgM, eliminating the possibility of competitive inhibition by soluble IgM in the serum. The specificity of the aptamer was confirmed by screening with 24 cell lines and fresh clinical leukemia samples. Out of 24 cell lines, the IgM-negative cells, including T-cell leukemias and solid tumor lines such as breast, kidney, and colon and ovarian, showed no binding with TD05 indicating there is no non-specific adhesion with cell lines. One of the challenges of using the current form of TD05 as a drug carrier is that it is not yet suitable for use in vivo because of low avidity (>10uM) and stability (t ½= 1min) at physiological conditions. In order to increase the affinity of this aptamer, a new truncated multivalent and nuclease stable aptamer was designed. First, truncation of the original version of TD05 was considered because reduced size may lead to more efficient chemical syntheses and better pharmacologic properties. The resulting TD05.1 has a 5-fold increased affinity compared to original version of TD05. Second, bivalent (BV) aptamers utilizing TD05.1 with various polyethylene glycol (PEG) linker lengths were designed. Linker length is critical in designing multivalent aptamers to avoid loss of binding due to steric hindrance and to optimize the binding geometry, both of which would affect binding affinity. An optimal linker length of ∼16nm was chosen after empiric binding studies. Nuclease stability was also addressed by the introduction of chemical functionalities into TD05.1. The introduction of non-natural bases such as LNA bases (Locked Nucleic Acids), have been demonstrated to be effective in this regard. The stability of LNA stems from the bicyclic furanose unit locked in a sugar conformation. In order to retain the specific recognition and 3-dimensional nature of the aptamer's folding, LNA analogues were only introduced at the regions that are not involved in binding. Additionally, to further improve nuclease resistance, increase circulation time in vivo and to prevent non-specific adhesion to serum proteins and cells, the LNA modified BV aptamer TD05.1 was modified with polyethylene glycol at the 3' and 5' ends. The introduction of LNA and polyethylene glycol further stabilized the secondary structure, increasing the affinity and nuclease resistance in serum from one minute to seven hours(t ½> 420 min). We then constructed a trivalent analog of the aptamer with multiple functionalities, including chelators and fluorophores, which showed ∼25-fold higher affinity compared to monomeric aptamer at physiological conditions. In conclusion, this study demonstrates the development of a trivalent, high affinity aptamer selective for the membrane bound human IgM found in B-cell leukemias and lymphoma. Studies to assess the biological activity and the use of this construct as a drug carrier to treat B-NHL and B-CLL are in progress. Disclosures:No relevant conflicts of interest to declare.

Folding of the cocaine aptamer studied by EPR and fluorescence spectroscopies using the bifunctional spectroscopic probe C

The cocaine aptamer is a DNA molecule that binds cocaine at the junction of three helices. The bifunctional spectroscopic probe Ç was incorporated independently into three different positions of the aptamer and changes in structure and dynamics upon addition of the cocaine ligand were studied. Nucleoside Ç contains a rigid nitroxide spin label and can be studied directly by electron paramagnetic resonance (EPR) spectroscopy and fluorescence spectroscopy after reduction of the nitroxide to yield the fluoroside Çf. Both the EPR and the fluorescence data for aptamer 2 indicate that helix III is formed before cocaine binding. Upon addition of cocaine, increased fluorescence of a fully base-paired Çf, placed at the three-way junction in helix III, was observed and is consistent with a helical tilt from a coaxial stack of helices II and III. EPR and fluorescence data clearly show that helix I is formed upon addition of cocaine, concomitant with the formation of the Y-shaped three-way helical junction. The EPR data indicate that nucleotides in helix I are more mobile than nucleotides in regular duplex regions and may reflect increased dynamics due to the short length of helix I.

A Smart Nanopore for Bio-Detection

The molecular scale pore structure, called nanopore, can be formed from protein ion channels by genetic engineering or fabricated on solid substrates using fashion nanotechnology. Target molecules in interaction with the functionalized lumen of nanopore, can produce characteristic changes in the pore conductance, which act as fingerprints, allowing us to identify single molecules and simultaneously quantify each target species in the mixture. Nanopore sensors have been created for tremendous biomedical detections, with targets ranging from metal ions, drug compounds and cellular second messengers, to proteins and DNAs. Recently, we have used the nanopore technique to dissect folding and unfolding mechanism of a single G-quadruplex DNA aptamer regulated by a variety of ions; we also created a portable and durable molecular device that integrated a protein pore sensor with a solidified lipid membrane for real-time detection.

An RNA Aptamer that Induces Transcription

We identified an RNA aptamer that induces TetR-controlled gene expression in Escherichia coli when expressed in the cell. The aptamer was found by a combined approach of in vitro selection for TetR binding and in vivo screening for TetR induction. The smallest active aptamer folds into a stem-loop with an internal loop interrupting the stem. Mutational analysis in vivo and in-line probing in vitro reveal this loop to be the protein binding site. The TetR-inducing activity of the aptamer directly correlates with its stability and the best construct is as efficient as the natural inducer tetracycline. Because of its small size, high induction efficiency, and the stability of the TetR aptamer under in vivo conditions, it is well suited to be an alternative RNA-based inducer of TetR-controlled gene expression.

Single-molecule detection of folding and unfolding of the G-quadruplex aptamer in a nanopore nanocavity.

Guanine-rich nucleic acids can form G-quadruplexes that are important in gene regulation, biosensor design and nano-structure construction. In this article, we report on the development of a nanopore encapsulating single-molecule method for exploring how cations regulate the folding and unfolding of the G-quadruplex formed by the thrombin-binding aptamer (TBA, GGTTGGTGTGGTTGG). The signature blocks in the nanopore revealed that the G-quadruplex formation is cation-selective. The selectivity sequence is K+ > NH4+ ∼ Ba2+ > Cs+ ∼ Na+ > Li+, and G-quadruplex was not detected in Mg2+ and Ca2+. Ba2+ can form a long-lived G-quadruplex with TBA. However, the capability is affected by the cation–DNA interaction. The cation-selective formation of the G-quadruplex is correlated with the G-quadruplex volume, which varies with cation species. The high formation capability of the K+-induced G-quadruplex is contributed largely by the slow unfolding reaction. Although the Na+- and Li+-quadruplexes feature similar equilibrium properties, they undergo radically different pathways. The Na+-quadruplex folds and unfolds most rapidly, while the Li+-quadruplex performs both reactions at the slowest rates. Understanding these ion-regulated properties of oligonucleotides is beneficial for constructing fine-tuned biosensors and nano-structures. The methodology in this work can be used for studying other quadruplexes and protein–aptamer interactions.

Systematic Investigation of Optimal Aptamer Immobilization for Protein−Microarray Applications

Aptamers are short single-stranded DNA or RNA oligonucleotides that can bind to a wide range of target molecules with high affinity and specificity. As nucleic acids, aptamers can undergo denaturation, but the process is reversible. As a result of this stability and the possibility of automated selection of aptamers, these oligonucleotides are highly promising capture molecules in microarray formats. In this study, his-tagged proteins and an aptamer directed against the his-tag were chosen as a model system. Different factors affect the activity of aptamers immobilized on a solid support like a microarray surface. The orientation of the immobilized aptamer plays an important role in correct aptamer folding and, thus, in effective binding of the corresponding target. Other important parameters identified in this work are the microarrays' surface charge as well as the length of the spacer between aptamer and solid support. These parameters were investigated systematically, resulting in the development of an aptamer-based microarray for detection of his-tagged proteins. The general applicability of the developed immobilization strategy was demonstrated by utilization of three different aptamers.

Single-Stranded DNA Oligoaptamers: Molecular Recognition and LPS Antagonism Are Length- and Secondary Structure-Dependent

In Gram-negative bacterial infection, lipopolysaccharide (LPS) readily overwhelms the host innate immune system, which could result in inflammation and sepsis in severe cases. Therefore, developing anti-LPS molecules would confer an efficient antibacterial strategy. We used SELEX (Systemic Evolution of Ligands by EXponential enrichment) to isolate single-stranded DNA (ssDNA) aptamers. By immobilizing and exposing different orientations of the LPS molecule on hydrophobic and hydrophilic surfaces, two populations of aptamers were captured from a library of 10^14–15 ssDNA oligonucleotides. Progressive SELEX enriched the aptamers towards thymidine residues. The more hydrophobic aptamers with T-rich loops showed strong molecular recognition for the lipid A moiety of LPS, binding at affinity of up to K_D of 10^–9M, and eliciting 95% neutralization of endotoxicity. The longer ssDNAs exhibited greater avidity for LPS and conferred more efficacious antagonism against LPS. The nucleotide composition imposes subtle influence on the aptamer folding and affinity for LPS.

Detection for folding of the thrombin binding aptamer using label-free electrochemical methods

The folding of aptamer immobilized on an Au electrode was successfully detected using label-free electrochemical methods. A thrombin binding DNA aptamer was used as a model system in the presence of various monovalent cations. Impedance spectra showed that the extent to which monovalent cations assist in folding of aptamer is ordered as K(+) > NH(4)(+) > Na(+) > Cs(+). Our XPS analysis also showed that K(+) and NH(4)(+) caused a conformational change of the aptamer in which it forms a stable complex with these monovalent ions. Impedance results for the interaction between aptamer and thrombin indicated that thrombin interacts more with folded aptamer than with unfolded aptamer. The EQCM technique provided a quantitative analysis of these results. In particular, the present impedance results showed that thrombin participates a folding of aptamer to some extent, and XPS analysis confirmed that thrombin stabilizes and induces the folding of aptamer.

DNA Aptamer Folding on Gold Nanoparticles: From Colloid Chemistry to Biosensors

We have investigated the effect of the folding of DNA aptamers on the colloidal stability of gold nanoparticles (AuNPs) to which an aptamer is tethered. On the basis of the studies of two different aptamers (adenosine aptamer and K+ aptamer), we discovered a unique colloidal stabilization effect associated with aptamer folding: AuNPs to which folded aptamer structures are attached are more stable toward salt-induced aggregation than those tethered to unfolded aptamers. This colloidal stabilization effect is more significant when a DNA spacer was incorporated between AuNP and the aptamer or when lower aptamer surface graft densities were used. The conformation that aptamers adopt on the surface appears to be a key factor that determines the relative stability of different AuNPs. Dynamic light scattering experiments revealed that the sizes of AuNPs modified with folded aptamers were larger than those of AuNPs modified with unfolded (but largely collapsed) aptamers in salt solution. From both the electrostatic and steric stabilization points of view, the folded aptamers that are more extended from the surface have a higher stabilization effect on AuNP than the unfolded aptamers. On the basis of this unique phenomenon, colorimetric biosensors have been developed for the detection of adenosine, K+, adenosine deaminase, and its inhibitors. Moreover, distinct AuNP aggregation and redispersion stages can be readily operated by controlling aptamer folding and unfolding states with the addition of adenosine and adenosine deaminase.

Folding of the SAM Aptamer is Determined by the Formation of a K-turn-dependent Pseudoknot

The S-adenosylmethionine (SAM) riboswitch is one of the most recurrent riboswitches found in bacteria and has three known different natural aptamers. The Bacillus subtilis yitJ SAM riboswitch aptamer is organized around a four-way junction which is characterized by the presence of a pseudoknot and a K-turn motif. By replacing the adenine involved in a Watson-Crick base pair at position 138 in the core region of the aptamer with the fluorescent analogue 2-aminopurine (2AP), we show that the ligand-induced reorganization of the aptamer strongly attenuates 2AP fluorescence. The fluorescence quenching process is specific to SAM on the basis of the observation that the structural analogue S-adenosylhomocysteine does not promote a similar effect. We find that the pseudoknot is important for the reorganization of the core domain and that the K-turn motif also has a marked influence on the core domain reorganization, most probably through its important role in pseudoknot formation. Finally, we show that SAM riboswitch ligand binding is facilitated by the L7Ae K-turn binding protein, which suggests that K-turn motifs may be protein anchor sites used by riboswitches to promote RNA folding.