Fluid Environment Research Articles

A comparative study of the bacterial diversity and composition of nursery piglets’ oral fluid, feces, and housing environment

The oral cavity is the portal of entry for many microorganisms that affect swine, and the swine oral fluid has been used as a specimen for the diagnosis of several infectious diseases. The oral microbiota has been shown to play important roles in humans, such as protection against non-indigenous bacteria. In swine, studies that have investigated the microbial composition of the oral cavity of pigs are scarce. This study aimed to characterize the oral fluid microbiota of weaned pigs from five commercial farms in Brazil and compare it to their respective fecal and environmental microbiotas. Bacterial compositions were determined by 16S rRNA gene sequencing and analyzed in R Studio. Oral fluid samples were significantly less diverse (alpha diversity) than pen floor and fecal samples (P < 0.01). Alpha diversity changed among farms in oral fluid and pen floor samples, but no differences were observed in fecal samples. Permutational ANOVA revealed that beta diversity was significantly different among sample types (P = 0.001) and farms (P = 0.001), with separation of sample types (feces, pen floor, and oral fluid) on the principal coordinates analysis. Most counts obtained from oral fluid samples were classified as Firmicutes (80.4%) and Proteobacteria (7.7%). The genera Streptococcus, members of the Pasteurellaceae family, and Veillonella were differentially abundant in oral fluid samples when compared to fecal samples, in which Streptococcus was identified as a core genus that was strongly correlated (SparCC) with other taxa. Firmicutes and Bacteroidota were the most relatively abundant phyla identified in fecal and pen floor samples, and Prevotella_9 was the most classified genus. No differentially abundant taxa were identified when comparing fecal samples and pen floor samples. We concluded that under the conditions of our study, the oral fluid microbiota of weaned piglets is different (beta diversity) and less diverse (alpha diversity) than the fecal and environmental microbiotas. Several differentially abundant taxa were identified in the oral fluid samples, and some have been described as important colonizers of the oral cavity in human microbiome studies. Further understanding of the relationship between the oral fluid microbiota and swine is necessary and would create opportunities for the development of innovative solutions that target the microbiota to improve swine health and production.

Tailbeat perturbations improve swimming efficiency by reducing the phase lag between body motion and the resulting fluid response.

Understanding how animals swim efficiently and generate high thrust in complex fluid environments is of considerable interest to researchers in various fields, including biology, physics, and engineering. However, the influence of often-overlooked perturbations on swimming fish remains largely unexplored. Here, we investigate the propulsion generated by oscillating tailbeats with superimposed rhythmic perturbations of high frequency and low amplitude. We reveal, using a combination of experiments in a biomimetic fish-like robotic platform, computational fluid dynamics simulations, and theoretical analysis, that rhythmic perturbations can significantly increase both swimming efficiency and thrust production. The introduction of perturbations increases pressure-induced thrust, while reduced phase lag between body motion and the subsequent fluid dynamics response improves swimming efficiency. Moreover, our findings suggest that beneficial perturbations are sensitive to kinematic parameters, resolving previous conflicts regarding the effects of such perturbations. Our results highlight the potential benefits of introducing perturbations in propulsion generators, providing potential hypotheses for living systems and inspiring the design of artificial flapping-based propulsion systems.

Touchless underwater wall-distance sensing via active proprioception of a robotic flapper

In this work, we explored a bioinspired method for underwater object sensing based on active proprioception. We investigated whether the fluid flows generated by a robotic flapper, while interacting with an underwater wall, can encode the distance information between the wall and the flapper, and how to decode this information using the proprioception within the flapper. Such touchless wall-distance sensing is enabled by the active motion of a flapping plate, which injects self-generated flow to the fluid environment, thus representing a form of active sensing. Specifically, we trained a long short-term memory (LSTM) neural network to predict the wall distance based on the force and torque measured at the base of the flapping plate. In addition, we varied the Rossby number (Ro, or the aspect ratio of the plate) and the dimensionless flapping amplitude ( A∗ ) to investigate how the rotational effects and unsteadiness of self-generated flow respectively affect the accuracy of the wall-distance prediction. Our results show that the median prediction error is within 5% of the plate length for all the wall-distances investigated (up to 40 cm or approximately 2–3 plate lengths depending on the Ro); therefore, confirming that the self-generated flow can enable underwater perception. In addition, we show that stronger rotational effects at lower Ro lead to higher prediction accuracy, while flow unsteadiness ( A∗ ) only has moderate effects. Lastly, analysis based on SHapley Additive exPlanations (SHAP) indicate that temporal features that are most prominent at stroke reversals likely promotes the wall-distance prediction.

Enhancing the performance of reinforced hydroxyapatite coatings through post coating treatment

To enhance the metallurgical, mechanical, and biological properties of medical implants in bodily fluid environments, biocompatible coatings are applied to biomaterials. These biocompatible coatings have a porous structure that promotes effective osseointegration and the ability to prevent harmful ions from metal from seeping into the surrounding bodily environment. In the present study, the impact of the addition of Tantlum carbide (TaC) with 5 and 10 wt% as reinforcement in hydroxyapatite (HA) on the morphology, mechanical and cell viability of plasma-sprayed coatings were investigated. The post-coating treatments are carried on pure HA, HA-R5(HA+5%TaC) & HA-R10 (HA+10%TaC) coatings at 900 °C and at low-temperature treatment at −196 °C. The results showed that heat treatment affects the crystallinity, surface roughness, and bond strength under different high-temperature and low-temperature treatments. Further, in-vitro results show that post-treated samples have more survival of cells as compared to as-sprayed samples. Also, heat-treated and reinforced HA coatings showed no toxicity.

In vivo biodegradation and biological properties of a Mg-Zn-Ca amorphous alloy for bone defect repair

ABSTRACT Amorphous magnesium alloys, characterised by their unique disordered structure, exhibit exceptional mechanical properties and superior corrosion resistance. This study introduced a novel biodegradable Mg-Zn-Ca amorphous alloy. Immersion and electrochemical tests revealed uniform degradation in a simulated body fluid environment. The degradation products predominantly contained zinc and oxygen. After 28 days of immersion, the alloy’s structure largely remained intact, and it exhibited a minimal weight loss rate of 11.64 ± 1.85%, indicating its excellent corrosion resistance. In addition, the homogeneous and rapid degradation of the Mg-Zn-Ca amorphous alloy in rats (the residual volume at 12 weeks was 14.94 ± 5.05%, at least 2–3 times of the corrosion rate of immersion in vitro), thus increasing the bone volume/total volume and trabecular number. The new bone and the residual material surface showed good bone integration. Blood and organ tissue tests confirmed the in vivo biological safety. Therefore, Mg-Zn-Ca amorphous alloys have excellent potential as bone-repair materials, especially in load-bearing areas.

Enhanced systematic delivery of fluconazole-loaded biotin-glutathione functionalized chitosan-g-proline carrier into the infected retinitis treatment

BackgroundThe polymer-based facile and effective drug carrier approach was developed to treat superficial fungal infected retinopathy infections.MethodsHere, biotin-glutathione (B-GHS) functionalized with chitosan grafted proline (CS-g-P) moieties were fabricated with the loading of fluconazole (FLZ) for the treatment of retinopathy. FT-IR and XRD techniques were used to characterize chemical structural and phase changes of the prepared carriers The SEM results show that the sphere morphology with interconnection particle nature.ResultsThe particle diameter was found as ~ 6.5 and ~ 8.6 nm for CS-g-P/B-GHS and FLZ-loaded CS-g-P/B-GHS carriers, respectively. The negative surface charge was found as the values of CS-g-P/B-GHS and FLZ-loaded CS-g-P/B-GHS, such as -20.7 mV and − 32.2 mV, from zeta potential analysis. The in-vitro FLZ releases from the CS-g-P/B-GHS were investigated at pH 7.4 (PBS) as the tear fluid environment, and it was observed at 85.02% of FLZ release in 8 h reaction time. The sustained release was observed, leading to the necessity for prolonged therapeutic effects. The antifungal effect of the carrier was studied by the minimum inhibitory concentration (MIC) and the percentage inhibition of viable fungal count against Candida albicans, and it observed 81.02% of the zone of inhibition by the FLZ carrier.ConclusionFLZ-loaded CS-g-P/B-GHS carrier could inhibit the biofilm formation in a concentration-dependent inhibition. Hence, A novel FLZ/B-GHS-CS-g-P carrier is a hopeful approach for effectively treating superficial fungal contaminations of the retina region.

A Combined Computational and Experimental Analysis of PLA and PCL Hybrid Nanocomposites 3D Printed Scaffolds for Bone Regeneration.

A combined computational and experimental study of 3D-printed scaffolds made from hybrid nanocomposite materials for potential applications in bone tissue engineering is presented. Polycaprolactone (PCL) and polylactic acid (PLA), enhanced with chitosan (CS) and multiwalled carbon nanotubes (MWCNTs), were investigated in respect of their mechanical characteristics and responses in fluidic environments. A novel scaffold geometry was designed, considering the requirements of cellular proliferation and mechanical properties. Specimens with the same dimensions and porosity of 45% were studied to fully describe and understand the yielding behavior. Mechanical testing indicated higher apparent moduli in the PLA-based scaffolds, while compressive strength decreased with CS/MWCNTs reinforcement due to nanoscale challenges in 3D printing. Mechanical modeling revealed lower stresses in the PLA scaffolds, attributed to the molecular mass of the filler. Despite modeling challenges, adjustments improved simulation accuracy, aligning well with experimental values. Material and reinforcement choices significantly influenced responses to mechanical loads, emphasizing optimal structural robustness. Computational fluid dynamics emphasized the significance of scaffold permeability and wall shear stress in influencing bone tissue growth. For an inlet velocity of 0.1 mm/s, the permeability value was estimated at 4.41 × 10-9 m2, which is in the acceptable range close to human natural bone permeability. The average wall shear stress (WSS) value that indicates the mechanical stimuli produced by cells was calculated to be 2.48 mPa, which is within the range of the reported literature values for promoting a higher proliferation rate and improving osteogenic differentiation. Overall, a holistic approach was utilized to achieve a delicate balance between structural robustness and optimal fluidic conditions, in order to enhance the overall performance of scaffolds in tissue engineering applications.

Preparation and characterisation of novel casein-gum Arabic composite microcapsules for targeted in vivo delivery of Lactiplantibacillus plantarum A3.

The health benefits of probiotics in the body are predicated on their ability to remain viable in harsh gastrointestinal conditions and complex pathological microenvironments. Casein and gum Arabic (GA), with dual emulsifying and stabilising effects in colloidal systems. Therefore, the objective of this research was to develop a novel microcapsule to encapsulate Lactiplantibacillus plantarum A3 using casein and GA as wall materials to improve the survival of the bacteria during gastrointestinal digestion, storage and lyophilization. The casein and GA composite microcapsules were prepared and characterised by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM). It was found that the microcapsules had stable morphology, uniform size and spherical shape. The results revealed that the encapsulation of microcapsules significantly improved the survival of L. plantarum A3 in gastrointestinal fluid environment (5.52× 109 cfu/ml) and lyophilization treatment (6.25× 109 cfu/ml). Furthermore, the microencapsulated L. plantarum A3 exhibited an improved ability to regulate intestinal microbiota by effectively increasing the relative abundance of Bacteroidetes, Proteobacteria and Actinobacteria and decreasing the relative abundance of Firmicutes in vivo. The findings of the study will help to design a lactic acid bacteria encapsulation system based on the gastrointestinal environment and provide a basis for the development of probiotic functional products.

Catalysts of Change: Assessing the Transformation Impact of Digital Wallets on Business

Digital wallets have emerged as game-changing technologies that are transforming the way businesses function and engage with their customers in today's quickly changing digital economy. Implications of digital wallets on corporate operations, customer interaction tactics, and business models. We look into the numerous ways that digital wallets support innovation, efficiency, and customer-centricity across a range of businesses. We want to provide a thorough understanding of how digital wallets are catalyzing change in the business and offer strategic insights for organizations looking to harness their revolutionary potential by looking at real-life case studies, obstacles, and possibilities. The necessity for businesses to adapt, integrate, and maximize digital wallet technology as they traverse the fluid environment of contemporary commerce is underlined by this study. Examine how digital wallets have a significant impact on how businesses operate. The UTAUT theory, which is well known for its potency in explaining the acceptance and usage of technology, offers a solid framework for examining the trans-formative implications of the adoption of digital wallets in the business setting. This paper evaluates the important factors that drive the adoption of digital wallets through an empirical analysis, including performance expectations, effort expectations, social influence, enabling environments, and their subsequent effects on business transformation. We seek to provide a thorough knowledge of how digital wallets serve as change agents in businesses, influencing their strategies, procedures, and consumer interactions by using the UTAUT framework. The conclusions drawn from this study will not only add to the body of knowledge on technology adoption but also provide useful advice for companies looking to strategically incorporate digital wallet technologies to traverse the rapidly changing world of digital commerce.

Buoyancy-Driven Micro/-Nanomotors: From Fundamentals to Applications.

The progression of self-powered micro/-nanomotors (MNMs) has rapidly evolved over the past few decades, showing applications in various fields such as nanotechnology, biomedical engineering, microfluidics, environmental science, and energy harvesting. Miniaturized MNMs transduce chemical/biochemical energies into mechanical motion for navigating through complex fluidic environments with directional control via external forces fields such as magnetic, photonic, and electric stimuli. Among various propulsion mechanisms, buoyancy-driven MNMs have received noteworthy recognition due to their simplicity, efficiency, and versatility. Buoyancy force-driven motors harness the principles of density variation-mediated force to overcome fluidic resistance to navigate through complex environments. Restricting the propulsion in one direction helps to control directional movement, making it more efficient in isotropic solutions. The changes in pH, ionic strength, chemical concentration, solute gradients, or the presence of specific molecules can influence the motion of buoyancy-driven MNMs as evidenced by earlier reports. This review aims to provide a fundamental and detailed analysis of the current state-of-the-art in buoyancy-driven MNMs, aiming to inspire further research and innovation in this promising field.

PVTF Nanoparticles/PLA Electroactive Degradable Membrane for Bone Tissue Regeneration

Electroactive biomaterials can influence the microenvironment between cells and a material’s surface by controlling surface electrical signals, thereby affecting cellular physiological activities. As the most commonly used ferroelectric polymer, Poly(vinylidene fluoride-trifluoroethylene) (PVTF) has attracted widespread attention due to its good stability, biocompatibility and mechanical properties. However, it has limitations such as non-degradability. In this study, PVTF nanoparticles (PVTF NPs), prepared using a phase separation method, were compounded with polylactide (PLA) to prepare PVTF NPs/PLA composite membrane (PN/PLA), which simultaneously achieved electroactivity and degradability. PVTF NPs containing ferroelectric β phase were evenly distributed on the PLA substrate, forming negative potential spots through corona polarization. The PLA substrate gradually degraded in a simulated body fluid environment. The negative surface potential provided by PVTF NPs in PN/PLA enhanced the adhesion, proliferation, and early-stage osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). The electrical bioactivity and degradability could be joined together in this study, which is promising for tissue regeneration biomaterials, such as guided bone regeneration membrane.

Towards More Precise Targeting of Inhaled Aerosols to Different Areas of the Respiratory System.

Pharmaceutical aerosols play a key role in the treatment of lung disorders, but also systemic diseases, due to their ability to target specific areas of the respiratory system (RS). This article focuses on identifying and clarifying the influence of various factors involved in the generation of aerosol micro- and nanoparticles on their regional distribution and deposition in the RS. Attention is given to the importance of process parameters during the aerosolization of liquids or powders and the role of aerosol flow dynamics in the RS. The interaction of deposited particles with the fluid environment of the lung is also pointed out as an important step in the mass transfer of the drug to the RS surface. The analysis presented highlights the technical aspects of preparing the precursors to ensure that the properties of the aerosol are suitable for a given therapeutic target. Through an analysis of existing technical limitations, selected strategies aimed at enhancing the effectiveness of targeted aerosol delivery to the RS have been identified and presented. These strategies also include the use of smart inhaling devices and systems with built-in AI algorithms.

Analytical results for pitching kinematics and propulsion performance of flexible foil

Natural flyers and swimmers employ flexible wings or fins to propel. While the complex interaction between the foil with deformation and the surrounding non-steady fluid environment defines the propulsion performance of the propellers, elucidating the interaction mechanism through theoretical models earns much challenge. Based on elastokinetics and linear potential flow theory, this study proposes a simplified analytical model to clarify the kinematics and the propulsion performance of a flexible thin foil pitching in flow. The dynamical forces, including the inertial force of the foil and the non-steady fluid pressure, are used to determine the averaged deformation angle of the foil. Combining the averaged deformation angle and the prescribed driving pitching motion, the kinematics of the foil is resolved analytically. Based on the analytical expressions for the corresponding pitching motion, analytical relations among the physical parameters of the stiffness and the mass of the foil and the driving frequency are given to these critical conditions, including resonance of the flow–structure system, equal pitching amplitude between the flexible foil and the rigid counterpart, phase angle transition from ${\rm \pi}/2$ to $- {\rm \pi}/2$ . Subsequently, the performance of the foil, including the thrust, the power and the propulsive efficiency, as a function of the flexibility of the foil are derived, together with the introduction of a bluff body type offset drag to the thrust. The formulated analytical theory, which matches nicely with previous reports, will help to interpret the effect of the flexibility and regulate the propulsive performance of the flexible foil when pitching in fluid.

Intelligent Navigation of a Magnetic Microrobot with Model-Free Deep Reinforcement Learning in a Real-World Environment.

Microrobotics has opened new horizons for various applications, especially in medicine. However, it also witnessed challenges in achieving maximum optimal performance. One key challenge is the intelligent, autonomous, and precise navigation control of microrobots in fluid environments. The intelligence and autonomy in microrobot control, without the need for prior knowledge of the entire system, can offer significant opportunities in scenarios where their models are unavailable. In this study, two control systems based on model-free deep reinforcement learning were implemented to control the movement of a disk-shaped magnetic microrobot in a real-world environment. The training and results of an off-policy SAC algorithm and an on-policy TRPO algorithm revealed that the microrobot successfully learned the optimal path to reach random target positions. During training, the TRPO exhibited a higher sample efficiency and greater stability. The TRPO and SAC showed 100% and 97.5% success rates in reaching the targets in the evaluation phase, respectively. These findings offer basic insights into achieving intelligent and autonomous navigation control for microrobots to advance their capabilities for various applications.

Sheathless inertial particle focusing methods within microfluidic devices: a review.

The ability to manipulate and focus particles within microscale fluidic environments is crucial to advancing biological, chemical, and medical research. Precise and high-throughput particle focusing is an essential prerequisite for various applications, including cell counting, biomolecular detection, sample sorting, and enhancement of biosensor functionalities. Active and sheath-assisted focusing techniques offer accuracy but necessitate the introduction of external energy fields or additional sheath flows. In contrast, passive focusing methods exploit the inherent fluid dynamics in achieving high-throughput focusing without external actuation. This review analyzes the latest developments in strategies of sheathless inertial focusing, emphasizing inertial and elasto-inertial microfluidic focusing techniques from the channel structure classifications. These methodologies will serve as pivotal benchmarks for the broader application of microfluidic focusing technologies in biological sample manipulation. Then, prospects for future development are also predicted. This paper will assist in the understanding of the design of microfluidic particle focusing devices.

Global biogeography and ecological implications of cobamide-producing prokaryotes.

Cobamides, a class of essential coenzymes synthesized only by a subset of prokaryotes, are model nutrients in microbial interaction studies and play significant roles in global ecosystems. Yet, their spatial patterns and functional roles remain poorly understood. Herein, we present an in-depth examination of cobamide-producing microorganisms, drawn from a comprehensive analysis of 2862 marine and 2979 soil metagenomic samples. A total of 1934 nonredundant metagenome-assembled genomes (MAGs) potentially capable of producing cobamides de novo were identified. The cobamide-producing MAGs are taxonomically diverse but habitat specific. They constituted only a fraction of all the recovered MAGs, with the majority of MAGs being potential cobamide users. By mapping the distribution of cobamide producers in marine and soil environments, distinct latitudinal gradients were observed: the marine environment showed peak abundance at the equator, whereas soil environments peaked at mid-latitudes. Importantly, significant and positive links between the abundance of cobamide producers and the diversity and functions of microbial communities were observed, as well as their promotional roles in essential biogeochemical cycles. These associations were more pronounced in marine samples than in soil samples, which suggests a heightened propensity for microorganisms to engage in cobamide sharing in fluid environments relative to the more spatially restricted soil environment. These findings shed light on the global patterns and potential ecological roles of cobamide-producing microorganisms in marine and soil ecosystems, enhancing our understanding of large-scale microbial interactions.

Digestive characteristics of extracellular polysaccharide from Lactiplantibacillus plantarum T1 and its regulation of intestinal microbiota

This study assessed the potential prebiotic characteristics of the previously reported Lactiplantibacillus plantarum extracellular polysaccharide (EPS-T1) with immunological activity. EPS-T1 was a novel heteropolysaccharide composed of glucose and galactose (1.00:1.21), with a molecular weight of 1.41 × 106 Da. The monosaccharide composition, molecular weight, fourier transform infrared, and 1H NMR analysis showed that EPS-T1 was well tolerated in the simulated oral cavity, gastric fluid, and small intestinal fluid environments, and was not easily degraded. Meanwhile, EPS-T1 could effectively be used as a carbon source to promote the growth of beneficial Lactobacillus species (Lactobacillus delbrueckii ssp. Bulgaricus, Streptococcus thermophilus, Lacticaseibacillus rhamnose GG, Lactiplantibacillus plantarum, Lacticaseibacillus paracasei and Lactobacillus reuteri). After 24 h of fecal fermentation, EPS-T1(5 mg/mL) effectively reduced the relative abundance of harmful bacteria such as the Escherichia-Shigella, Citrobacter, Fusobacterium, Parasutterella, and Lachnoclostridium. While, the level content of beneficial flora (Bacteroides, Blautia, Phascolarctobacterium, Bifidobacterium, Parabacteroides, and Subdoligranulum) were significantly increased. In addition, EPS-T1 was able to significantly promote the enrichment of short-chain fatty acids such as acetic acid, propionic acid and butyric acid. These results provide some basis for the functional application of EPS-T1 as a potential prebiotic.

Microscopic theory of a Janus motor in a non-equilibrium fluid: Surface hydrodynamics and boundary conditions.

We present a derivation from the first principles of the coupled equations of motion of an active self-diffusiophoretic Janus motor and the hydrodynamic densities of its fluid environment that are nonlinearly displaced from equilibrium. The derivation makes use of time-dependent projection operator techniques defined in terms of slowly varying coarse-grained microscopic densities of the fluid species number, total momentum, and energy. The exact equations of motion are simplified using time scale arguments, resulting in Markovian equations for the Janus motor linear and angular velocities with average forces and torques that depend on the fluid densities. For a large colloid, the fluid equations are separated into bulk and interfacial contributions, and the conditions under which the dynamics of the fluid densities can be accurately represented by bulk hydrodynamic equations subject to boundary conditions on the colloid are determined. We show how the results for boundary conditions based on continuum theory can be obtained from the molecular description and provide Green-Kubo expressions for all transport coefficients, including the diffusiophoretic coupling and the slip coefficient.

Single-cell force spectroscopy of fluid flow-tuned cell adhesion for dissecting hemodynamics in tumor metastasis.

Cell adhesion plays an important role in regulating the metastasis of cancer cells, and atomic force microscopy (AFM)-based single-cell force spectroscopy (SCFS) has become an important method to directly measure the adhesion forces of individual cells. Particularly, bodily fluid flow environments strongly affect the functions and behaviors of metastatic cells for successful dissemination. Nevertheless, the interactions between fluidic flow medium environment and cell adhesion remain poorly understood. In this work, AFM-based SCFS was exploited to examine the effects of fluidic flow environment on cellular adhesion. A fluidic cell culture medium device was used to simulate the fluidic flow environment experienced by cancer cells during metastasis, which was combined with AFM-based SCFS assay. A single living cancer cell was attached to the AFM tipless cantilever to prepare the single-cell probe for performing SCFS experiments on the mesothelial cells grown under the fluidic flow medium conditions, and the effects of experimental parameters (retraction speed, contact time, loading force) on the measured cellular adhesion forces were analyzed. Experimental results of SCFS assay show that cellular adhesion forces significantly decrease after growth in fluidic flow medium, whereas cellular adhesion forces increase after growth in static culture medium. Experiments performed with the use of spherical probes coated with cell adhesion-associated biomolecules also show the weakening of cell adhesion after growth in fluidic flow cell culture medium, which was subsequently confirmed by the confocal fluorescence microscopy experiments of cell adhesion molecules, vividly illustrating the remarkable effects of fluidic flow environment on cellular adhesion. The study provides a new approach to detect adhesion force dynamics involved in the interactions between cells and the fluidic flow environment at the single-cell level, which will facilitate dissecting the role of hemodynamics in tumor metastasis.

Silk fibroin-based hemostatic powders with instant and robust adhesion performance for sutureless sealing of gastrointestinal defects.

Powder-based hemostatic technology has offered unprecedented opportunities in surgical sealing and repair of irregularly shaped and noncompressible wounds. Despite their routine use, existing clinical hemostatic powders are challenged either by poor mechanical properties or inadequate adhesion to bleeding tissues in biological environments. Here, inspired by the mussel foot proteins' fusion assembly strategy, a novel silk fibroin-based hemostatic powder (named as SF/PEG/TA) with instant and robust adhesion performance is developed. Upon absorbing interfacial liquids, the SF/PEG/TA powders rapidly swell into micro-gels and subsequently contact with each other to transform into a macroscopically homogeneous hydrogel in situ, strengthening its interfacial bonding with various substrates in fluidic environments. The in vitro and in vivo results show that the SF/PEG/TA powder possesses ease of use, good biocompatibility, strong antibacterial activities, and effective blood clotting abilities. The superior hemostatic sealing capability of the SF/PEG/TA powder is demonstrated in the rat liver, heart, and gastrointestinal injury models. Moreover, in vivo investigation of rat skin incision and gastrointestinal perforation models validates that the SF/PEG/TA powder promotes wound healing and tissue regeneration. Taken together, compared to existing clinical hemostatic powders, the proposed SF/PEG/TA powder with superior wound treatment capabilities has high potential for clinical hemostasis and emergency rescue.