Filament Subunits Research Articles

Origin of Twist-Bend Coupling in Actin Filaments

Actin filaments are semiflexible polymers that display large-scale conformational twisting and bending motions. Modulation of filament bending and twisting dynamics has been linked to regulatory actin-binding protein function, filament assembly and fragmentation, and overall cell motility. The relationship between actin filament bending and twisting dynamics has not been evaluated. The numerical and analytical experiments presented here reveal that actin filaments have a strong intrinsic twist-bend coupling that obligates the reciprocal interconversion of bending energy and twisting stress. We developed a mesoscopic model of actin filaments that captures key documented features, including the subunit dimensions, interaction energies, helicity, and geometrical constraints coming from the double-stranded structure. The filament bending and torsional rigidities predicted by the model are comparable to experimental values, demonstrating the capacity of the model to assess the mechanical properties of actin filaments, including the coupling between twisting and bending motions. The predicted actin filament twist-bend coupling is strong, with a persistence length of 0.15–0.4 μm depending on the actin-bound nucleotide. Twist-bend coupling is an emergent property that introduces local asymmetry to actin filaments and contributes to their overall elasticity. Up to 60% of the filament subunit elastic free energy originates from twist-bend coupling, with the largest contributions resulting under relatively small deformations. A comparison of filaments with different architectures indicates that twist-bend coupling in actin filaments originates from their double protofilament and helical structure.

Specific cleavage of the DNase-I binding loop dramatically decreases the thermal stability of actin

Differential scanning calorimetry was used to investigate the thermal unfolding of actin specifically cleaved within the DNaseI-binding loop between residues Met47-Gly48 or Gly42-Val43 by two bacterial proteases, subtilisin or ECP32/grimelysin (ECP), respectively. The results obtained show that both cleavages strongly decreased the thermal stability of monomeric actin with either ATP or ADP as a bound nucleotide. An even more pronounced difference in the thermal stability between the cleaved and intact actin was observed when both actins were polymerized into filaments. Similar to intact F-actin, both cleaved F-actins were significantly stabilized by phalloidin and aluminum fluoride; however, in all cases, the thermal stability of the cleaved F-actins was much lower than that of intact F-actin, and the stability of ECP-cleaved F-actin was lower than that of subtilisin-cleaved F-actin. These results confirm that the DNaseI-binding loop is involved in the stabilization of the actin structure, both in monomers and in the filament subunits, and suggest that the thermal stability of actin depends, at least partially, on the conformation of the nucleotide-binding cleft. Moreover, an additional destabilization of the unstable cleaved actin upon ATP/ADP replacement provides experimental evidence for the highly dynamic actin structure that cannot be simply open or closed, but rather should be considered as being able to adopt multiple conformations.

Plasticity of Intermediate Filament Subunits

Intermediate filaments (IFs) assembled in vitro from recombinantly expressed proteins have a diameter of 8–12 nm and can reach several micrometers in length. IFs assemble from a soluble pool of subunits, tetramers in the case of vimentin. Upon salt addition, the subunits form first unit length filaments (ULFs) within seconds and then assembly proceeds further by end-to-end fusion of ULFs and short filaments. So far, IF subunits have mainly been observed by electron microscopy of glycerol sprayed and rotary metal shadowed specimens. Due to the shear forces during spraying the IF subunits appear generally as straight thin rods. In this study, we used atomic force microscopy (AFM), cryo-electron microscopy (cryo-EM) combined with molecular modeling to investigate the conformation of the subunits of vimentin, desmin and keratin K5/K14 IFs in various conditions. Due to their anisotropic shape the subunits are difficult to image at high resolution by cryo-EM. In order to enhance contrast we used a cryo-negative staining approach. The subunits were clearly identified as thin, slightly curved rods. However the staining agent also forced the subunits to aggregate into two-dimensional networks of dot-like structures. To test this conformational change further, we imaged dried unfixed subunits on mica by AFM revealing a mixture of extended and dot-like conformations. The use of divalent ions such as calcium and magnesium, as well as glutaraldehyde exposure favored compact conformations over elongated ones. These experimental results as well as coarse-grained molecular dynamics simulations of a vimentin tetramer highlight the plasticity of IF subunits.

Actin filament remodeling by actin depolymerization factor/cofilin

We investigate, using molecular dynamics, how the severing protein, actin depolymerization factor (ADF)/cofilin, modulates the structure, conformational dynamics, and mechanical properties of actin filaments. The actin and cofilactin filament bending stiffness and corresponding persistence lengths obtained from all-atom simulations are comparable to values obtained from analysis of thermal fluctuations in filament shape. Filament flexibility is strongly affected by the nucleotide-linked conformation of the actin subdomain 2 DNase-I binding loop and the filament radial mass density distribution. ADF/cofilin binding between subdomains 1 and 3 of a filament subunit triggers reorganization of subdomain 2 of the neighboring subunit such that the DNase-I binding loop (DB-loop) moves radially away from the filament. Repositioning of the neighboring subunit DB-loop significantly weakens subunit interactions along the long-pitch helix and lowers the filament bending rigidity. Lateral filament contacts between the hydrophobic loop and neighboring short-pitch helix monomers in native filaments are also compromised with cofilin binding. These works provide a molecular interpretation of biochemical solution studies documenting the disruption of filament subunit interactions and also reveal the molecular basis of actin filament allostery and its linkage to ADF/cofilin binding.

The role of the FliK molecular ruler in hook‐length control in Salmonella enterica

A molecular ruler, FliK, controls the length of the flagellar hook. FliK measures hook length and catalyses the secretion-substrate specificity switch from rod-hook substrate specificity to late substrate secretion, which includes the filament subunits. Here, we show normal hook-length control and filament assembly in the complete absence of the C-ring thus refuting the previous 'cup' model for hook-length control. Mutants of C-ring components, which are reported to produce short hooks, show a reduced rate of hook-basal body assembly thereby allowing for a premature secretion-substrate specificity switch. Unlike fliK null mutants, hook-length control in an autocleavage-defective mutant of flhB, the protein responsible for the switch to late substrate secretion, is completely abolished. FliK deletion variants that retain the ability to measure hook length are secreted thus demonstrating that FliK directly measures rod-hook length during the secretion process. Finally, we present a unifying model accounting for all published data on hook-length control in which FliK acts as a molecular ruler that takes measurements of rod-hook length while being intermittently secreted during the assembly process of the hook-basal body complex.

Structural Polymorphism of the ParM Filament and Dynamic Instability

Segregation of the R1 plasmid in bacteria relies on ParM, an actin homolog that segregates plasmids by switching between cycles of polymerization and depolymerization. We find similar polymerization kinetics and stability in the presence of either ATP or GTP and a 10-fold affinity preference for ATP over GTP. We used electron cryo-microscopy to evaluate the heterogeneity within ParM filaments. In addition to variable twist, ParM has variable axial rise, and both parameters are coupled. Subunits in the same ParM filaments can exist in two different structural states, with the nucleotide-binding cleft closed or open, and the bound nucleotide biases the distribution of states. The interface between protomers is different between these states, and in neither state is it similar to F-actin. Our results suggest that the closed state of the cleft is required but not sufficient for ParM polymerization, and provide a structural basis for the dynamic instability of ParM filaments.

Cyanobacteria

Cyanobacteria

A Process Model of Actin Polymerisation

Actin is the monomeric subunit of actin filaments which form one of the three major cytoskeletal networks in eukaryotic cells. Actin dynamics, be it the polymerisation of actin monomers into filaments or the reverse process, plays a key role in many cellular activities such as cell motility and phagocytosis. There is a growing number of experimental, theoretical and mathematical studies on the components of actin polymerisation and depolymerisation. However, it remains a challenge to develop compositional models of actin dynamics, e.g., by using differential equations. In this paper, we propose compositional process algebra models of actin polymerisation, and present a geometric representation of these models that allows to generate movies reflecting their dynamics.

An integrative simulation model linking major biochemical reactions of actin-polymerization to structural properties of actin filaments

We report on an advanced universal Monte Carlo simulation model of actin polymerization processes offering a broad application panel. The model integrates major actin-related reactions, such as assembly of actin nuclei, association/dissociation of monomers to filament ends, ATP-hydrolysis via ADP-Pi formation and ADP-ATP exchange, filament branching, fragmentation and annealing or the effects of regulatory proteins. Importantly, these reactions are linked to information on the nucleotide state of actin subunits in filaments (ATP hydrolysis) and the distribution of actin filament lengths. The developed stochastic simulation modelling schemes were validated on: i) synthetic theoretical data generated by a deterministic model and ii) sets of our and published experimental data obtained from fluorescence pyrene-actin experiments. Build on an open-architecture principle, the designed model can be extended for predictive evaluation of the activities of other actin-interacting proteins and can be applied for the analysis of experimental pyrene actin-based or fluorescence microscopy data. We provide a user-friendly, free software package ActinSimChem that integrates the implemented simulation algorithms and that is made available to the scientific community for modelling in silico any specific actin-polymerization system.

Three-Dimensional Reconstruction of Tarantula Myosin Filaments Suggests How Phosphorylation May Regulate Myosin Activity

Muscle contraction involves the interaction of the myosin heads of the thick filaments with actin subunits of the thin filaments. Relaxation occurs when this interaction is blocked by molecular switches on these filaments. In many muscles, myosin-linked regulation involves phosphorylation of the myosin regulatory light chains (RLCs). Electron microscopy of vertebrate smooth muscle myosin molecules (regulated by phosphorylation) has provided insight into the relaxed structure, revealing that myosin is switched off by intramolecular interactions between its two heads, the free head and the blocked head. Three-dimensional reconstruction of frozen–hydrated specimens revealed that this asymmetric head interaction is also present in native thick filaments of tarantula striated muscle. Our goal in this study was to elucidate the structural features of the tarantula filament involved in phosphorylation-based regulation. A new reconstruction revealed intra- and intermolecular myosin interactions in addition to those seen previously. To help interpret the interactions, we sequenced the tarantula RLC and fitted an atomic model of the myosin head that included the predicted RLC atomic structure and an S2 (subfragment 2) crystal structure to the reconstruction. The fitting suggests one intramolecular interaction, between the cardiomyopathy loop of the free head and its own S2, and two intermolecular interactions, between the cardiac loop of the free head and the essential light chain of the blocked head and between the Leu305–Gln327 interaction loop of the free head and the N-terminal fragment of the RLC of the blocked head. These interactions, added to those previously described, would help switch off the thick filament. Molecular dynamics simulations suggest how phosphorylation could increase the helical content of the RLC N-terminus, weakening these interactions, thus releasing both heads and activating the thick filament.

Plectin deficiency affects precursor formation and dynamics of vimentin networks

Plectin is a typical cytolinker protein that connects intermediate filaments to the other cytoskeletal filament systems and anchors them at membrane-associated junctional sites. One of the most important binding partners of plectin in fibroblasts is the intermediate filament subunit protein vimentin. Previous studies have demonstrated that vimentin networks are highly dynamic structures whose assembly and disassembly is accomplished stepwise via several intermediates. The precursor forms as well as polymerized (filamentous) vimentin are found in the cells in a dynamic equilibrium characterized by the turnover of the subunits within the polymer and the movement of the smaller precursors. To examine whether plectin plays a role in intermediate filament dynamics, we studied vimentin filament formation in plectin-deficient compared to wild-type fibroblasts using GFP-tagged vimentin. Monitoring vimentin and plectin in spreading and dividing cells, we demonstrate that plectin is associated with vimentin from the early stages of assembly and is required for vimentin motility as well as for the stepwise formation of stable filaments. Furthermore, plectin prevents vimentin networks from complete disassembly during mitosis, facilitating the rebuilding of the intermediate filament network in daughter cells.

Difference in polymerization and steady-state dynamics of free and gelsolin-capped filaments formed by α- and β-isoactins

The polymerization of scallop β-like actin is significantly slower than that of skeletal muscle α-actin. To reveal which steps of polymerization contribute to this difference, we estimated the efficiency of nucleation of the two actins, the rates of filament elongation at spontaneous and gelsolin-nucleated polymerization and the turnover rates of the filament subunits at steady-state. Scallop actin nucleated nearly twice less efficient than rabbit actin. In actin filaments with free ends, when dynamics at the barbed ends overrides that at the pointed ends, the relative association rate constants of α- and β-actin were similar, whereas the relative dissociation rate constant of β-ATP-actin subunits was 2- to 3-fold higher than that of α-actin. The 2- to 3-fold faster polymerization of skeletal muscle versus scallop Ca-actin was preserved with gelsolin-capped actin filaments when only polymerization at the pointed end is possible. With gelsolin-induced polymerization, the rate constants of dissociation of ATP-actin subunits from the pointed ends were similar, while the association rate constant of β-actin to the pointed filament ends was twice lower than that of α-actin. This difference may be of physiological relevance for functional intracellular sorting of actin isoforms.

Stochastic Severing of Actin Filaments by Actin Depolymerizing Factor/Cofilin Controls the Emergence of a Steady Dynamical Regime

Actin dynamics (i.e., polymerization/depolymerization) powers a large number of cellular processes. However, a great deal remains to be learned to explain the rapid actin filament turnover observed in vivo. Here, we developed a minimal kinetic model that describes key details of actin filament dynamics in the presence of actin depolymerizing factor (ADF)/cofilin. We limited the molecular mechanism to 1), the spontaneous growth of filaments by polymerization of actin monomers, 2), the ageing of actin subunits in filaments, 3), the cooperative binding of ADF/cofilin to actin filament subunits, and 4), filament severing by ADF/cofilin. First, from numerical simulations and mathematical analysis, we found that the average filament length, 〈 L〉, is controlled by the concentration of actin monomers (power law: 5/6) and ADF/cofilin (power law: −2/3). We also showed that the average subunit residence time inside the filament, 〈 T〉, depends on the actin monomer (power law: −1/6) and ADF/cofilin (power law: −2/3) concentrations. In addition, filament length fluctuations are ∼20% of the average filament length. Moreover, ADF/cofilin fragmentation while modulating filament length keeps filaments in a high molar ratio of ATP- or ADP-P i versus ADP-bound subunits. This latter property has a protective effect against a too high severing activity of ADF/cofilin. We propose that the activity of ADF/cofilin in vivo is under the control of an affinity gradient that builds up dynamically along growing actin filaments. Our analysis shows that ADF/cofilin regulation maintains actin filaments in a highly dynamical state compatible with the cytoskeleton dynamics observed in vivo.

Effects of Solution Crowding on Actin Polymerization Reveal the Energetic Basis for Nucleotide-Dependent Filament Stability

Actin polymerization is a fundamental cellular process involved in cell structure maintenance, force generation, and motility. Phosphate release from filament subunits following ATP hydrolysis destabilizes the filament lattice and increases the critical concentration ( C c) for assembly. The structural differences between ATP- and ADP-actin are still debated, as well as the energetic factors that underlie nucleotide-dependent filament stability, particularly under crowded intracellular conditions. Here, we investigate the effect of crowding agents on ATP- and ADP-actin polymerization and find that ATP-actin polymerization is largely unaffected by solution crowding, while crowding agents lower the C c of ADP-actin in a concentration-dependent manner. The stabilities of ATP- and ADP-actin filaments are comparable in the presence of physiological amounts (∼ 30% w/v) and types (sorbitol) of low molecular weight crowding agents. Crowding agents act to stabilize ADP-F-actin by slowing subunit dissociation. These observations suggest that nucleotide hydrolysis and phosphate release per se do not introduce intrinsic differences in the in vivo filament stability. Rather, the preferential disassembly of ADP-actin filaments in cells is driven through interactions with regulatory proteins. Interpretation of the experimental data according to osmotic stress theory implicates water as an allosteric regulator of actin activity and hydration as the molecular basis for nucleotide-dependent filament stability.

The LIM Domains of WLIM1 Define a New Class of Actin Bundling Modules

Actin filament bundling, i.e. the formation of actin cables, is an important process that relies on proteins able to directly bind and cross-link subunits of adjacent actin filaments. Animal cysteine-rich proteins and their plant counterparts are two LIM domain-containing proteins that were recently suggested to define a new family of actin cytoskeleton regulators involved in actin filament bundling. We here identified the LIM domains as responsible for F-actin binding and bundling activities of the tobacco WLIM1. The deletion of one of the two LIM domains reduced significantly, but did not entirely abolish, the ability of WLIM1 to bind actin filaments. Individual LIM domains were found to interact directly with actin filaments, although with a reduced affinity compared with the native protein. Variants lacking the C-terminal or the inter-LIM domain were only weakly affected in their F-actin stabilizing and bundling activities and trigger the formation of thick cables containing tightly packed actin filaments as does the native protein. In contrast, the deletion of one of the two LIM domains negatively impacted both activities and resulted in the formation of thinner and wavier cables. In conclusion, we demonstrate that the LIM domains of WLIM1 are new autonomous actin binding and bundling modules that cooperate to confer WLIM1 high actin binding and bundling activities.

The Flagellar Filament Structure of the Extreme Acidothermophile Sulfolobus shibatae B12 Suggests that Archaeabacterial Flagella have a Unique and Common Symmetry and Design

Archaea, constituting a third domain of life between Eubacteria and Eukarya, characteristically inhabit extreme environments. They swim by rotating flagellar filaments that are phenomenologically and functionally similar to those of eubacteria. However, biochemical, genetic and structural evidence has pointed to significant differences but even greater similarity to eubacterial type IV pili. Here we determined the three-dimensional symmetry and structure of the flagellar filament of the acidothermophilic archaeabacterium Sulfolobus shibatae B12 using transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM). Processing of the cryo-negatively stained filaments included analysis of their helical symmetry and subsequent single particle reconstruction. Two filament subunit packing arrangements were identified: one has helical symmetry, similar to that of the extreme halophile Halobacterium salinarum, with ten subunits per 5.3 nm repeat and the other has helically arranged stacked disks with C 3 symmetry and 12 subunits per repeat. The two structures are related by a slight twist. The S. shibatae filament has a larger diameter compared to that of H. salinarum, at the opposite end of the archaeabacterial phylogenetic spectrum, but the basic three-start symmetry and the size and arrangement of the core domain are conserved and the filament lacks a central channel. This similarity suggests a unique and common underlying symmetry for archaeabacterial flagellar filaments.

Sorting of Early and Late Flagellar Subunits After Docking at the Membrane ATPase of the Type III Export Pathway

The bacterial flagellum assembles in a strict order, with structural subunits delivered to the growing flagellum by a type III export pathway. Early rod-and-hook subunits are exported before completion of the hook, at which point a subunit-specificity switch allows export of late filament subunits. This implies that in bacteria with multiple flagella at different stages of assembly, each export pathway can discriminate and sort unchaperoned early and chaperoned late subunits. To establish whether subunit sorting is distinct from subunit transition from the cytosol to the membrane, in particular docking at the membrane-associated FliI ATPase, the pathway was manipulated in vivo. When ATP hydrolysis by the FliI ATPase was disabled and when the pathway was locked into an early export state, both unchaperoned early and chaperoned late subunits stalled and accumulated at the inner membrane. Furthermore, a chaperone that attenuates late subunit export by stalling when docked at the wild-type ATPase also stalled at the ATPase in an early-locked pathway and inhibited export of early subunits in both native and early-locked pathways. These data indicate that the pathways for early and late subunits converge at the FliI ATPase, independent of ATP hydrolysis, before a distinct, separable sorting step. To ascertain the likely signals for sorting, the export of recombinant subunits was assayed. Late filament subunits unable to bind their chaperones were still sorted accurately, but chaperoned late subunits were directed through an early-locked pathway when fused to early subunit N-terminal export signal regions. Furthermore, while an early subunit signal directed export of a heterologous type III export substrate through both native and early-locked pathways, a late subunit signal only directed export via native pathways. These data suggest that subunits are distinguished not by late chaperones but by N-terminal export signals of the subunits themselves.

Ultrastructural organization and development cycle of soil ultramicrobacteria belonging to the class Alphaproteobacteria

Gram-negative chemoorganotrophic soil ultramicrobacteria (UMB), strains NF1 and NF3, have been isolated. In their development cycle, the strains formed small coccoid cells of 400-800 nm and ultrasmall cells of 200-300 nm. Phylogenetically, the strains NF1 and NF3 belong to Alphaproteobacteria and are close to the type strain of the recently described species Kaistia adipata. The ultrastructure of UMB cells has been studied using ultrathin sections and freeze-fracturing. It has been shown that the structure of UMB cell walls is of the gram-negative type; the outer membrane and peptidoglycan layer are well differentiated. The cell surface has numerous protrusions (prosthecae) of conical or spherical shape filled with the contents of the periplasm. The formation of unusual cellular structures (not occurring in known free-living bacteria) is a feature of UMB: these include the following: (a) piles of rod-like subunits, ca. 30 A in diameter and 150-250 angstroms in length: (b) long bunches (up to 300-400 angstroms) comprised of filamentous subunits; and (c) large electron-dense spherical bodies (up to 200-300 angstroms in diameter) localized in the periplasm. A distinctive feature of UMB is their ability to grow as facultative parasites on living cyanobacterial (CB) cells. In this case, three types of interaction between UMB and CB have been revealed: (1) adsorption of UMB cells on the surface of CB cells; (2) penetration of UMB into polysaccharide sheathes; and (3) penetration of UMB into CB eytoplasm. UMB cells have been shown to reproduce by budding, with buds (up to 2-3) located directly on the mother cell, without formation of intennediate hyphae.

Quantitative Proteomics Identifies Surfactant-Resistant α-Synuclein in Cerebral Cortex of Parkinsonism-Dementia Complex of Guam but Not Alzheimer's Disease or Progressive Supranuclear Palsy

Parkinsonism-dementia complex (PDC) remains a significant health burden to the Chamorro population. We tested the hypothesis that quantitative proteomics might provide fresh insight into this enigmatic illness by analyzing proteins resistant to surfactant extraction from patients with Alzheimer's disease (AD) or PDC and their matched controls using isobaric tags for relative and absolute quantification. In addition to the expected increase in abnormal frontal cortical Abeta peptides, tau, ubiquitin, and apolipoprotein E in AD, and tau in PDC, we identified alpha-synuclein (SNCA) as a major abnormal protein in PDC but not AD. We confirmed our isobaric tags for relative and absolute quantification findings by enzyme-linked immunosorbent assay in frontal and temporal cortices. We extended our assays to include a limited number of cases of progressive supranuclear palsy (PSP) and dementia with Lewy bodies; we observed increased abnormal tau but not SNCA in PSP, and abnormal SNCA in dementia with Lewy bodies that was quantitatively similar to PDC. Finally, soluble Abeta oligomers were selectively increased in AD but not PDC or PSP. These results show that frontal and temporal cortex in PDC is distinguished from AD and PSP by its accumulation of abnormal SNCA and suggest that PDC be considered a synucleinopathy as well as a tauopathy.

Kinases and phosphatases and tau sites involved in Alzheimer neurofibrillary degeneration

Microtubule associated protein (MAP) tau is abnormally hyperphosphorylated in Alzheimer's disease (AD) and related tauopathies; in this form it is the major protein subunit of paired helical filaments (PHF)/neurofibrillary tangles. However, the nature of protein kinases and phosphatases and tau sites involved in this lesion has been elusive. We investigated self-assembly and microtubule assembly promoting activities of hyperphosphorylated tau isolated from Alzheimer disease brain cytosol, the AD abnormally hyperphosphorylated tau (AD P-tau) before and after dephosphorylation by phosphoseryl/phosphothreonyl protein phosphatase-2A (PP-2A), and then rephosphorylation by cyclic AMP-dependent protein kinase (PKA), calcium, calmodulin-dependent protein kinase II (CaMKII), glycogen synthase kinase-3beta (GSK-3beta) and cyclin-dependent protein kinase 5 (cdk5) in different kinase combinations. We found that (i) dephosphorylation of AD P-tau by PP-2A inhibits its polymerization into PHF/straight filaments (SF) and restores its binding and ability to promote assembly of tubulin into microtubules; (ii) rephosphorylation of PP-2A-dephosphorylated AD P-tau by sequential phosphorylation by PKA, CaMKII and GSK-3beta or cdk5, and as well as by cdk5 and GSK-3beta, promotes its self-assembly into tangles of PHF similar to those seen in Alzheimer brain, and (iii) phosphorylation of tau sites required for this pathology are Thr231 and Ser262, along with several sites flanking the microtubule binding repeat region. Phosphorylation of recombinant human brain tau(441) yielded similar results as the PP-2A dephosphorylated AD P-tau, except that mostly SF were formed. The conditions for the abnormal hyperphosphorylation of tau that promoted its self-assembly also induced the microtubule assembly inhibitory activity. These findings suggest that activation of PP-2A or inhibition of either both GSK-3beta and cdk5 or one of these two kinases plus PKA or CaMKII might be required to inhibit Alzheimer neurofibrillary degeneration.