Enhancing Osteogenic Differentiation Research Articles

Gold Kiwi-Derived Nanovesicles Mitigate Ultraviolet-Induced Photoaging and Enhance Osteogenic Differentiation in Bone Marrow Mesenchymal Stem Cells

Bone marrow mesenchymal stem cells (BM-MSCs) play a crucial role in bone formation through their ability to differentiate into osteoblasts. Aging, however, detrimentally affects the differentiation and proliferation capacities of BM-MSCs, consequently impairing bone regeneration. Thus, mitigating the aging effects on BM-MSCs is vital for addressing bone-related pathologies. In this study, we demonstrate that extracellular nanovesicles isolated from gold kiwi (GK-NVs) protect human BM-MSCs from ultraviolet (UV)-induced photoaging, thereby alleviating aging-related impairments in cellular functions that are crucial for bone homeostasis. Notably, GK-NVs were efficiently taken up by BM-MSCs without causing cytotoxicity. GK-NVs reduced intracellular reactive oxygen species (ROS) levels upon UV irradiation, restoring impaired proliferation and migration capabilities. Furthermore, GK-NVs corrected the skewed differentiation capacities of UV-irradiated BM-MSCs by enhancing osteoblast differentiation, as evidenced by the increased expression in osteoblast-specific genes and the calcium deposition, and by reducing adipocyte differentiation, as indicated by the decreased lipid droplet formation. These findings position GK-NVs as a promising biomaterial for the treatment of bone-related diseases such as osteoporosis.

Enhancing osteogenic differentiation in human umbilical cord mesenchymal stem cells: A review

Background: The article aims to review osteogenic differentiation enhancement in human Umbilical Cord Mesenchymal Stem Cells (hUCMSCs). Material and Methods: The literature review was carried out in PUBMED with the keywords: human Umbilical Cord Mesenchymal Stem Cells (hUCMSCs) and osteogenic differentiation. Conclusions: Many research investigated the impact of different substances on the osteogenic differentiation of hUCMSCs and the appliance by which these substances promote osteogenesis in hUCMSCs which are a potential source for bone regeneration.

Enhancing osteogenic differentiation of diabetic tendon stem/progenitor cells through hyperoxia: Unveiling ROS/HIF-1α signalling axis.

Diabetic calcific tendinopathy is the leading cause of chronic pain, mobility restriction, and tendon rupture in patients with diabetes. Tendon stem/progenitor cells (TSPCs) have been implicated in the development of diabetic calcified tendinopathy, but the molecular mechanisms remain unclear. This study found that diabetic tendons have a hyperoxic environment, characterized by increased oxygen delivery channels and carriers. In hyperoxic environment, TSPCs showed enhanced osteogenic differentiation and increased levels of reactive oxygen species (ROS). Additionally, hypoxia-inducible factor-1a (HIF-1a), a protein involved in regulating cellular responses to hyperoxia, was decreased in TSPCs by the ubiquitin-proteasome system. By intervening with antioxidant N-acetyl-L-cysteine (NAC) and overexpressing HIF-1a, we discovered that blocking the ROS/HIF-1a signalling axis significantly inhibited the osteogenic differentiation ability of TSPCs. Animal experiments further confirmed that hyperoxic environment could cause calcification in the Achilles tendon tissue of rats, while NAC intervention prevented calcification. These findings demonstrate that hyperoxia in diabetic tendons promotes osteogenic differentiation of TSPCs through the ROS/HIF-1a signalling axis. This study provides a new theoretical basis and research target for preventing and treating diabetic calcified tendinopathy.

Mitigating lipopolysaccharide-induced impairment in human dental pulp stem cells with tideglusib-doped nanoparticles: Enhancing osteogenic differentiation and mineralization

ObjectiveDrug-loaded non-resorbable polymeric nanoparticles (NPs) are proposed as an adjunctive treatment for pulp regenerative strategies. The present in vitro investigation aimed to evaluate the effectiveness of tideglusib-doped nanoparticles (TDg-NPs) in mitigating the adverse effects of bacterial lipopolysaccharide endotoxin (LPS) on the viability, morphology, migration, differentiation and mineralization potential of human dental pulp stem cells (hDPSCs). MethodsCell viability, proliferation, and differentiation were assessed using a MTT assay, cell migration evaluation, cell cytoskeleton staining analysis, Alizarin Red S staining and expression of the odontogenic related genes by a real-time quantitative polymerase chain reaction (RT-qPCR) were also performed. Cells were tested both with and without stimulation with LPS at various time points. One-way ANOVA and Tukey's test were employed for statistical analysis (p < 0.05). ResultsAdequate cell viability was encountered in all groups and at every tested time point (24, 48, 72 and 168 h), without differences among the groups (p > 0.05). The analysis of cell cytoskeleton showed nuclear alteration in cultures with undoped NPs after LPS stimulation. These cells exhibited an in blue diffuse and multifocal appearance. Some nuclei looked fragmented and condensed. hDPSCs after LPS stimulation but in the presence of TDg-NPs exhibited less nuclei changes. LPS induced down-regulation of Alkaline phosphatase, Osteonectin and Collagen1 gene markers, after 21d. LPS half-reduced the cells production of calcium deposits in all groups (p < 0.05), except in the group with TDg-NPs (decrease about 10 %). SignificanceLPS induced lower mineral deposition and cytoskeletal disorganization in hDPSCs. These effects were counteracted by TDg-NPs, enhancing osteogenic differentiation and mineralization.

Enhancing Osteogenic Differentiation of Dental Pulp Stem Cells with Covalently Bonded All‐Carbon Scaffolds

AbstractThe regeneration of bone tissue is a complex process requiring innovative biomaterials with enhanced osteogenic properties to facilitate successful tissue engineering. Herein, a 3D bionic scaffold comprised of covalently bound graphene/carbon nanotube monoliths are present (3DGp/CNTs) exhibiting long‐range ordered porous characteristics, showcasing promising attributes for bone tissue applications. The lightweight, all‐carbon scaffolds not only demonstrate excellent mechanical performance in the hydrated state but also mimic the structural and functional features of the extracellular matrix, actively promoting cellular adhesion, proliferation, and differentiation. Significantly, the osteogenic differentiation of dental pulp stem cells (DPSCs) is observed, as evidenced by the upregulation of RUNX2, OSX, BSP, ALP, OPN, and OCN expression. This notable outcome can be attributed to the synergistic effect of 3DGp/CNTs, which create a conducive microenvironment for DPSCs and promote osteogenic differentiation by activating the BMP pathway. This observation elucidates the mechanism through which 3DGp/CNTs induce DPSC mineralization. The combination of these advantages, along with its straightforward and cost‐effective preparation technique, positions 3DGp/CNTs as a promising candidate for dental clinical engineering.

Enhancing osteogenic differentiation of dental pulp stem cells through rosuvastatin loaded niosomes optimized by Box-Behnken design and modified by hyaluronan: a novel strategy for improved efficiency

Bone tissue engineering necessitates a stem cell source capable of osteoblast differentiation and mineralized matrix production. Dental pulp stem cells (DPSCs), a subtype of mesenchymal stem cells from human teeth, present such potential but face challenges in osteogenic differentiation. This research introduces an innovative approach to bolster DPSCs’ osteogenic potential using niosomal and hyaluronan modified niosomal systems enriched with rosuvastatin. While rosuvastatin fosters bone formation by regulating bone morphogenetic proteins and osteoblasts, its solubility, permeability, and bioavailability constraints hinder its bone regeneration application. Using a Box-Behnken design, optimal formulation parameters were ascertained. Both niosomes were analyzed for size, polydispersity, zeta potential, and other parameters. They displayed average sizes under 275 nm and entrapment efficiencies exceeding 62%. Notably, niosomes boosted DPSCs’ cell viability and osteogenic marker expression, suggesting enhanced differentiation and bone formation. Conclusively, the study underscores the potential of both niosomal systems in ameliorating DPSCs’ osteogenic differentiation, offering a promising avenue for bone tissue engineering and regeneration.Graphical

Enhancing osteogenic differentiation of MC3T3-E1 cells during inflammation using UPPE/β-TCP/TTC composites via the Wnt/β-catenin pathway.

Periodontitis can lead to defects in the alveolar bone, thus increasing the demand for dependable biomaterials to repair these defects. This study aims to examine the pro-osteogenic and anti-bacterial properties of UPPE/β-TCP/TTC composites (composed of unsaturated polyphosphoester [UPPE], β-tricalcium phosphate [β-TCP], and tetracycline [TTC]) under an inflammatory condition. The morphology of MC3T3-E1 cells on the composite was examined using scanning electron microscopy. The toxicity of the composite to MC3T3-E1 cells was assessed using the Alamar-blue assay. The pro-osteogenic potential of the composite was assessed through ALP staining, ARS staining, RT-PCR, and WB. The antimicrobial properties of the composite were assessed using the zone inhibition assay. The results suggest that: (1) MC3T3-E1 cells exhibited stable adhesion to the surfaces of all four composite groups; (2) the UPPE/β-TCP/TTC composite demonstrated significantly lower toxicity to MC3T3-E1 cells; and (3) the UPPE/β-TCP/TTC composite had the most pronounced pro-osteogenic effect on MC3T3-E1 cells by activating the WNT/β-catenin pathway and displaying superior antibacterial properties. UPPE/β-TCP/TTC, as a biocomposite, has been shown to possess antibacterial properties and exhibit excellent potential in facilitating osteogenic differentiation of MC3T3-E1 cells.

Enhancing osteogenic differentiation of mesenchymal stem cells seeded on a polycaprolactone/MoS2 nanofibrous scaffold through electrical stimulation

A PCL/MoS2 nanofibrous composite was characterized for bone tissue engineering. The osteogenic differentiation of mesenchymal stem cells was assessed. Electrical stimulation and differential media efficiently improved osteogenic differentiation.

Enhancing osteogenic differentiation in adipose-derived mesenchymal stem cells with Near Infra-Red and Green Photobiomodulation

Worldwide, osteoporosis is the utmost predominant degenerative bone condition. Stem cell regenerative therapy using adipose-derived mesenchymal stem cells (ADMSCs) is a promising therapeutic route for osteoporosis. Photobiomodulation (PBM) has sparked considerable international appeal due to its’ ability to augment stem cell proliferation and differentiation properties. Furthermore, the differentiation of ADMSCs into osteoblast cells and cellular proliferation effects have been established using a combination of osteogenic differentiation inducers and PBM. This in vitro study applied dexamethasone, β-glycerophosphate disodium, and ascorbic acid as differentiation inducers for osteogenic induction differentiation media. In addition, PBM at a near-infrared (NIR) wavelength of 825 nm, a green (G) wavelength of 525 nm, and the novel combination of both these wavelengths using a single fluence of 5 J/cm2 had been applied to stimulate proliferation and differentiation effectivity of immortalised ADMSCs into early osteoblasts. Flow cytometry and ELISA were used to identify osteoblast antigens using early and late osteoblast protein markers. Alizarin red Stain was employed to identify calcium-rich deposits by cells within culture. The morphology of the cells was examined, and biochemical assays such as an EdU proliferation assay, MTT proliferation and viability assay, Mitochondrial Membrane Potential assay, and Reactive Oxygen Species assay were performed. The Central Scratch Test determined the cells' motility potential. The investigative outcomes revealed that a combination of PBM treatment and osteogenic differentiation inducers stimulated promising early osteogenic differentiation of immortalised ADMSCs. The NIR-Green PBM combination did appear to offer great potential for immortalised ADMSC differentiation into early osteoblasts amongst selected assays, however, further investigations will be required to establish the effectivity of this novel wavelength combination. This research contributes to the body of knowledge and assists in the establishment of a standard for osteogenic differentiation in vitro utilising PBM.

3D-Printed PCL Scaffolds Coated with Nanobioceramics Enhance Osteogenic Differentiation of Stem Cells.

With advances in bone tissue engineering, various materials and methods have been explored to find a better scaffold that can help in improving bone growth and regeneration. Three-dimensional (3D) printing by fused deposition modeling can produce customized scaffolds from biodegradable polyesters such as polycaprolactone (PCL). Although the fabricated PCL scaffolds exhibited a lack of bioactivity and poor cell attachment on their surfaces, herein, using a simple postfabrication modification method with hydroxyapatite (HA) and bioglasses (BGs), we obtained better cell proliferation and attachment. Biological behavior and osteosupportive capacity of the 3D-printed scaffolds including PCL, PCL/HA, PCL/BG, and PCL/HA/BG were evaluated in this study, while human adipose tissue-derived mesenchymal stem cells (hADSCs) were cultured on the scaffolds. The cell morphology, attachment, and proliferation were investigated using scanning electron microscopy (SEM), 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay, and 4′,6-diamidino-2-phenylindole (DAPI) staining. In the next step, the ability of stem cells to differentiate into osteoblasts was evaluated by measuring alkaline phosphatase (ALP) activity, calcium deposition, and bone-related gene and protein expression. In the end, the expression levels of miR-20a, miR-125a, and their target genes were also investigated as positive and negative regulators in osteogenesis pathways. The results showed that the coated scaffolds with bioceramics present a more appropriate surface for cell adhesion and proliferation, as well as efficient potential in inducing osteoconduction and osteointegration compared to PCL alone and control. The PCL/HA/BG scaffold exhibited higher in vitro cell viability and bone formation compared to the other groups, which can be due to the synergistic effect of HA and BG. On the whole, this tricomponent 3D-printing scaffold has a promising prospect for bone tissue engineering applications.

Enhancing osteogenic differentiation of BMSCs on high magnetoelectric response films.

High performance of biomaterial surfaces provides a sound basis to mediate cellular growth behavior. In this work, we attempted to incorporate both positive and negative magnetostriction particles of CoFe2O4 (CFO) and TbxDy1-xFe2 alloy (TD) into piezoelectric poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) for forming high magnetoelectric effect films, on which osteogenic differentiation could be dynamically mediated by a magnetic-field-induced surface potential (φME).The negatively poled film with TD/CFO volume ratio of 1:4 (1T4C) showed a highest magnetoelectric effect with φME of -171mV at 2800Oe. Compared with CFO/P(VDF-TrFE) and TD/P(VDF-TrFE) films, the φME increased about 213% and 173%, respectively. This could result from that P(VDF-TrFE) dipole domains receive a larger off-axial stress caused by the distribution characteristic of CFO and TD in P(VDF-TrFE), consequently to facilitate P(VDF-TrFE) dipole domain rearrangement. When MSCs were cultured on 1T4C film for 7 or 14days, the magnetic actuation was setup to begin at the 4th or 8th day after the culture. The 7-day osteogenic differentiation was hardly affected for magnetic actuation at 4th day, moreover, the 14-day differentiation was significantly enhanced for magnetic actuation at 8th day. The enhancement appears just at a relatively late period of the cell growth, probably because the cells need a steady change in cell membrane potential to disassociate pairs of β-catenin and E-cadherin and activate osteogenic-related signaling pathway. This work could provide an alternative way to promote performance for magnetoelectric materials, and get insight into understanding of interactions of surface potential with cells.

Three-Dimensional Printed Titanium Scaffolds Enhance Osteogenic Differentiation and New Bone Formation by Cultured Adipose Tissue-Derived Stem Cells Through the IGF-1R/AKT/Mammalian Target of Rapamycin Complex 1 (mTORC1) Pathway.

BackgroundThis study aimed to investigate the effects of three-dimensional (3D) printed titanium (3DTi) scaffolds on osteogenic differentiation and new bone formation by 3D cultured adipose tissue-derived stem cells (ADSCs) in vitro, and the effects of bone regeneration in vivo using a full-thickness mandibular defect rat model, and the mechanisms involved.Material/MethodsAlpha-beta titanium alloy (Ti6Al4V) 3DTi scaffolds were prepared with Cellmatrix hydrogel and 3D culture medium. ADSCs were impregnated into the 3DTi scaffolds. ADSC viability and proliferation were assessed using the cell counting kit-8 (CCK-8) assay, and alkaline phosphatase (ALP) levels were measured. Real-time polymerase chain reaction (RT-PCR) and Western blot were performed to assess the expression of osteogenesis-related mRNA for RUNX2, OPN, OCN, and IGF-1 genes and proteins. A rat model of full-thickness mandibular defect was evaluated with micro-computed tomography (microCT) scanning, and histochemistry with Alizarin red and von Giesen’s stain were used to evaluate osteogenesis.ResultsADSC viability and proliferation were not affected by culture with 3DTi scaffolds. Expression of osteogenesis-related mRNA and proteins for RUNX2, OPN, OCN, and IGF-1, expression of ALP, and histochemical findings showed that the use of 3DTi scaffolds enhanced osteogenic differentiation and new bone formation by ADSCs, with upregulation of components of the IGF-1R/AKT/mTORC1 pathway.ConclusionsThe 3D culture of ADSCs with 3DTi scaffolds enhanced osteogenic differentiation and new bone formation through the IGF-1R/AKT/mTORC1 pathway. This improved method of osteointegration may have clinical application in the preparation of bone grafts before implantation for improved repair of mandibular bone defects.

Polyelectrolyte Complexes between Polycarboxylates and BMP-2 for Enhancing Osteogenic Differentiation: Effect of Chemical Structure of Polycarboxylates.

Bone morphogenetic protein 2 (BMP-2) has received considerable attention because of its osteoinductivity, but its use is limited owing to its instability and adverse effects. To reduce the dose of BMP-2, complexation with heparin is a promising approach, because heparin enhances the osteoinductivity of BMP-2. However, the clinical use of heparin is restricted because of its anticoagulant activity. Herein, to explore alternative polymers that show heparin-like activity, four polycarboxylates, poly(acrylic acid) (PAA), poly(methacrylic acid) (PMAA), poly(aspartic acid) (PAsp), and poly(glutamic acid) (PGlu), were selected and their capability to modulate the osteoinductivity of BMP-2 was evaluated. Dynamic light scattering indicated that these polycarboxylates formed polyelectrolyte complexes with BMP-2. The osteogenic differentiation efficiency of MC3T3-E1 cells treated with the polycarboxylate/BMP-2 complexes was investigated in comparison to that of the heparin/BMP-2 complex. As a result, PGlu/BMP-2 complex showed the highest activity of alkaline phosphatase, which is an early-stage marker of osteogenic differentiation, and rapid mineralization. Based on these observations, PGlu could serve as an alternative to heparin in the regenerative therapy of bone using BMP-2.

Laser-Based Hybrid Manufacturing of Endosseous Implants: Optimized Titanium Surfaces for Enhancing Osteogenic Differentiation of Human Mesenchymal Stem Cells

Additive manufacturing (AM) is becoming increasingly important in the orthopedic and dental sectors thanks to two major advantages: the possibility of custom manufacturing and the integration of complex structures. However, at smaller scales, surface conditions of AM products are not mastered. Numerous non-fused powder particles give rise to roughness values (Sa) greater than 10 μm, thus limiting biomedical applications since the surface roughness of, e.g., metal implants plays a major role in the quality and rate of osseointegration. In this study, an innovative hybrid machine combining AM and a femtosecond laser (FS) was used to obtain Ti6Al4V parts with biofunctional surfaces. During the manufacturing process, the FS laser beam "neatly" ablates the surface, leaving in its path nanostructures created by the laser/matter interaction. This step decreases the Sa from 11 to 4 μm and increases the surface wettability. The behavior of human mesenchymal stem cells was evaluated on these new AM+FS surfaces and compared with that on AM surfaces and also on polished surfaces. The number of cells attached 24 h after plating is equivalent on all surfaces, but cell spreading is higher on AM+FS surfaces compared with their AM counterparts. In the longer term (days 7 and 14), fibronectin and collagen synthesis increase on AM+FS surfaces as opposed to AM alone. Alkaline phosphatase activity, osteocalcin production, and mineralization, markers of osteogenic differentiation, are significantly lower on raw AM surfaces, whereas on the AM+FS specimens they display a level equivalent to that on the polished surface. Overall, these results indicate that using an FS laser beam during the fabrication of AM parts optimizes surface morphology to favor osteoblastic differentiation. This new hybrid machine could make it possible to produce AM implants with functional surfaces directly at the end of AM, thereby limiting their post-treatments.

Construction and Use of an Electrical Stimulation Chamber for Enhancing Osteogenic Differentiation in Mesenchymal Stem/Stromal Cells In Vitro

Mesenchymal stem/stromal cells (MSCs) have been used extensively to promote bone healing in tissue engineering approaches. Electrical stimulation (EStim) has been demonstrated to increase MSC osteogenic differentiation in vitro and promote bone healing in clinical settings. Here we describe the construction of an EStim cell culture chamber and its use in treating rat bone-marrow-derived MSC to enhance osteogenic differentiation. We found that treating MSCs with EStim for 7 days results in a significant increase in the osteogenic differentiation, and importantly, this pro-osteogenic effect persists long after (7 days) EStim is discontinued. This approach of pretreating MSCs with EStim to enhance osteogenic differentiation could be used to optimize bone tissue engineering treatment outcomes and, thus, help them to achieve their full therapeutic potential. In addition to this application, this EStim cell culture chamber and protocol can also be used to investigate other EStim-sensitive cell behaviors, such as migration, proliferation, apoptosis, and scaffold attachment.

Construction and Use of an Electrical Stimulation Chamber for Enhancing Osteogenic Differentiation in Mesenchymal Stem/Stromal Cells In Vitro

Construction and Use of an Electrical Stimulation Chamber for Enhancing Osteogenic Differentiation in Mesenchymal Stem/Stromal Cells In Vitro

Electrospun Poly-L-Lactic Acid Coated with Silicate Bioceramic Nanoparticles Enhance Osteogenic Differentiation of Adipose Tissue Derived Mesenchymal Stem Cells

Electrospun Poly-L-Lactic Acid Coated with Silicate Bioceramic Nanoparticles Enhance Osteogenic Differentiation of Adipose Tissue Derived Mesenchymal Stem Cells

Enhancing osteogenic differentiation of MC3T3-E1 cells by immobilizing RGD onto liquid crystal substrate

To understand the effects of GRGDF modification on MC3T3-E1 cell behavior, we cultured these cells onto a biomimetic liquid crystalline matrix modified with GRGDF peptide (OPC-GA-RGD). Successful immobilization of GRGDF on the liquid crystalline surface was verified by fluorescent labeling, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS). OPC-GA-RGDs retained its liquid crystalline feature after surface modification. The RGD-immobilized OPC substrate was hardly beneficial to initial cell adhesion but could support long-term cell survival. The enhancement in cell proliferation did not correlate with RGD density. The lower GRGDF density immobilized on the liquid crystalline OPC matrix (OPC-GA-RGD3) promoted cell adhesion, proliferation, ALP expression level and mineralization, suggesting that both the viscoelasticity-based mechanical stimuli and receptor/ligand-based biochemical cue synergistically modulate MC3T3-E1 cell behavior.

Demethylation of IGFBP5 by Histone Demethylase KDM6B Promotes Mesenchymal Stem Cell-Mediated Periodontal Tissue Regeneration by Enhancing Osteogenic Differentiation and Anti-Inflammation Potentials.

Mesenchymal stem cell (MSC)-mediated periodontal tissue regeneration is considered a promising method for periodontitis treatment. The molecular mechanism underlying directed differentiation and anti-inflammatory actions remains unclear, thus limiting potential MSC application. We previously found that insulin-like growth factor binding protein 5 (IGFBP5) is highly expressed in dental tissue-derived MSCs compared with in non-dental tissue-derived MSCs. IGFBP5 is mainly involved in regulating biological activity of insulin-like growth factors, and its functions in human MSCs and tissue regeneration are unclear. In this study, we performed gain- and loss-of-function assays to test whether IGFBP5 could regulate the osteogenic differentiation and anti-inflammatory potential in MSCs. We found that IGFBP5 expression was upregulated upon osteogenic induction, and that IGFBP5 enhanced osteogenic differentiation in MSCs. We further showed that IGFBP5 prompted the anti-inflammation effect of MSCs via negative regulation of NFκB signaling. Depletion of the histone demethylase lysine (K)-specific demethylase 6B (KDM6B) downregulated IGFBP5 expression by increasing histone K27 methylation in the IGFBP5 promoter. Moreover, IGFBP5 expression in periodontal tissues was downregulated in individuals with periodontitis compared with in healthy people, and IGFBP5 enhanced MSC-mediated periodontal tissue regeneration and alleviated local inflammation in a swine model of periodontitis. In conclusion, our present results reveal a new function for IGFBP5, provide insight into the mechanism underlying the directed differentiation and anti-inflammation capacities of MSCs, and identify a potential target mediator for improving tissue regeneration.

Enhancing osteogenic differentiation of MC3T3-E1 cells by immobilizing inorganic polyphosphate onto hyaluronic acid hydrogel.

In tissue engineering, precise control of cues in the microenvironment is essential to stimulate cells to undergo bioactivities such as proliferation, differentiation, and matrix production. However, current approaches are inefficient in providing nondepleting cues. In this study, we have developed a novel bioactive hydrogel (HAX-PolyP) capable of enhancing tissue growth by conjugating inorganic polyphosphate chains onto hyaluronic acid macromers. The immobilized polyphosphates provided constant osteoconductive stimulation to the embedded murine osteoblast precursor cells, resulting in up-regulation of osteogenic marker genes and enhanced levels of ALP activity. The osteoconductive activity was significantly higher when compared to those stimulated with free-floating polyphosphates. Even at very low concentrations, immobilization of polyphosphates onto the scaffold allowed sufficient signaling leading to more effective osteoconduction. These results demonstrate the potential of our novel material as an injectable bioactive scaffold, which can be clinically useful for developing bone grafts and bone regeneration applications.