Enantiopure Materials Research Articles

Conformational, Structural, and Chiroptical Properties of an Overcrowded Triply Fused Carbo[7]helicene.

Recently, the synthesis of the racemate of an overcrowded triply fused carbo[7]helicene of formula C66H36 with three carbo[7]helicenes fused within a central six-membered ring was described. This molecule was found to embed an extremely contorted central six-membered ring and two negative curvatures. We report herein the resolution of the corresponding enantiomers and their conformational, structural, photophysical, and chiroptical properties. The racemization of the triply fused carbo[7]helicene was determined to proceed at a rate of krac = 8.06 × 10-4 s-1 at 175 °C in ortho-dichlorobenzene, corresponding to a barrier to enantiomerization ΔGenant‡ = 140.4 kJ·mol-1, a value significantly lower than for pristine carbo[7]helicene. Interestingly, the crystalline structures of the racemic and enantiopure materials show some differences regarding the molecular geometry, with an increased negative curvature in the latter cases. This unusual curved delocalized π-conjugated system afforded notably green fluorescence at room temperature and far-red phosphorescence at low temperature. Finally, electronic circular dichroism and circularly polarized luminescence responses of the enantiopure compounds have been measured and showed very close absorption and emission dissymmetry factors, gabs and glum, respectively, of ca. 2.6 × 10-3, indicating a similar chiral rigid geometry for both ground and excited states.

Enantioselective Self-Replicators.

Self-replicating molecules provide a simple approach for investigating fundamental processes in scenarios of the emergence of life. Although homochirality is an important aspect of life and of how it emerged, the effects of chirality on self-replicators have received only little attention so far. Here, we report several self-assembled self-replicators with enantioselectivity that emerge spontaneously and grow only from enantiopure material. These require a relatively small number of chiral units in the replicators (down to eight) and in the precursors (down to a single chiral unit), compared to the only other enantioselective replicator reported previously. One replicator was found to incorporate material of its own handedness with high fidelity when provided with a racemic mixture of precursors, thus sorting (L)- and (D)-precursors into (L)- and (D)-replicators. Systematic studies reveal that the presence or absence of enantioselectivity depends on structural features (ring size of the replicator) that appear to impose constraints on its supramolecular organization. This work reveals new aspects of the little researched interplay between chirality and self-replication and represents another step toward the de novo synthesis of life.

Synthesis and Resolution of an Axially Chiral Spirocyclic Quaternary Ammonium Ion‐Based Phase‐Transfer Catalyst

AbstractWe report the synthesis of a novel spirocyclic quaternary ammonium salt that possesses axial chirality. Enantiopure material was obtained by fractional crystallization of the corresponding (R,R)‐tartrate salt. Application of this chiral quaternary ammonium salt in phase‐transfer catalytic asymmetric alkylation of glycinate Schiff base was examined.

Transforming Silver Nanoclusters from Racemic to Homochiral via Seeded Crystallization.

Chirality has risen as an attractive topic in materials research in recent years, but the attainment of enantiopure materials remains a major challenge. Herein, we obtained homochiral nanoclusters by a recrystallization strategy, without any chiral factors (i.e., chiral ligands, counterions, etc.). Through the rapid flipping of configuration of silver nanoclusters in solution, the initial racemic Ag40 (triclinic) nanoclusters are converted to homochiral (orthorhombic) as revealed by X-ray crystallography. In the seeded crystallization, one homochiral Ag40 crystal is used as a seed to direct the growth of crystals with specific chirality. Furthermore, enantiopure Ag40 nanoclusters can be used as amplifiers for the detection of chiral carboxylic drugs. This work not only provides chiral conversion and amplification strategies to obtain homochiral nanoclusters but also explains the chirality origin of nanoclusters at the molecular level.

Prevalence and Significance of Approximate Symmetry in Organic Pc Structures

AbstractA survey has been made of the well determined (R≤0.050) organic crystal structures that have only a single glide plane (e. g., are in space group Pc) and that have more than one crystallographically independent formula unit (Z′>1); the goal was to discover what fraction have additional approximate symmetry. Of the 377 unique structures examined 8 % should almost certainly been refined in a higher‐symmetry unit cell; 86 % of the remaining 347 have approximate symmetry that is periodic in at least one dimension. While these percentages are similar to those found for P1 structures (C. P. Brock, Acta Crystallogr., Sect. B 2022, 78, 576–588), the types of approximate symmetry differ because 89 % of the P1, Z′>1 structures were composed of enantiopure material. The 347 reliable Pc structures include 118 that are slightly distorted or mimicked Cc and P21/c structures, 15 of which were reported as having been determined at room temperature. The distortions in another 72 are so large that the approximate symmetry must be seen as periodic in two dimensions only. These results suggest that symmetry lowering may accompany transformation of a crystal nucleus to a macroscopic crystal.

Pervasive approximate periodic symmetry in organic P1 structures.

The goal of this project was to identify the prevalence of approximate symmetry in organic P1 structures. In the November 2019 version of the Cambridge Structural Database (CSD), there are 2592 organic, P1, R ≤ 0.050 structures; complete, unique entries are available for 1407 Z= Z'> 1 and 1049 Z= Z'= 1 structures. All the Z> 1 structures can have approximate symmetry; the Z= 1 structures were scanned to find those composed of molecules or ions that might lie on a special position and those that have two or more large molecules or ions that are very similar. The number of Z= 1 structures so identified was 285, of which 49 were grouped with the Z> 1 structures because Zeffective> 1. The packing in each of the 1407+285= 1692 structures was investigated. The 144 that should almost certainly have been described in a smaller or higher-symmetry unit cell were removed from the list; 120 of the 144 are composed of achiral or racemic material. (About half of the Z= 1 and 89% of the Z> 1 structures are composed of enantiopure material.) Approximate periodic symmetry was found in 86% of the 1337 remaining Z> 1 structures and in 72% of the 211 remaining Z= 1 structures. About a third of the enantiomerically pure structures mimic inversion symmetry; 38% have approximate rotational symmetry. For the structures of achiral and racemic material, distorted glide or mirror symmetry is more common than is distorted inversion symmetry. Approximate rotational and glide symmetry was found to be periodic in two dimensions considerably more often than in three. In 4% of the structures, different layer types alternate or layers are related by approximate local rotations, as well as by small translations. In 5% of the structures, different parts of the molecule are segregated into two-dimensional regions that have different approximate symmetries. More than a third of the structures that are a distorted version of a higher-symmetry structure were determined at T ≥ 288 K.

Asymmetric Elimination Reaction on Chiral Metal Surfaces.

The production of enantiopure materials and molecules is of uttermost relevance in research and industry in numerous contexts, ranging from nonlinear optics to asymmetric synthesis. In the context of the latter, dehalogenation, which is an essential reaction step for a broad class of chemical reactions, is investigated; specifically, dehalogenation of prochiral 5-bromo-7-methylbenz(a)anthracene (BMA) on prototypical, chiral, intermetallic PdGa{111} surfaces under ultrahigh vacuum conditions. Asymmetric halogen elimination is demonstrated by combining temperature-programmed X-ray photoelectron spectroscopy, scanning probe microscopy, and density functional theory. On the PdGa{111} surfaces, the difference in debromination temperatures for the two BMA surface enantiomers amounts up to an unprecedented 46 K. The significant dependence of the dehalogenation temperature of the BMA surface enantiomers on the atomic termination of the PdGa{111} surfaces implies that the ensemble effect is pronounced in this reaction step. These findings evidence enantiospecific control and hence promote intrinsically chiral crystals for asymmetric on-surface synthesis.

Taking advantage of lithium monohalocarbenoid intrinsic α-elimination in 2-MeTHF: controlled epoxide ring-opening en route to halohydrins.

The intrinsic degradative α-elimination of Li carbenoids somehow complicates their use in synthesis as C1-synthons. Nevertheless, we herein report how boosting such an α-elimination is a straightforward strategy for accomplishing controlled ring-opening of epoxides to furnish the corresponding β-halohydrins. Crucial for the development of the method is the use of the eco-friendly solvent 2-MeTHF, which forces the degradation of the incipient monohalolithium, due to the very limited stabilizing effect of this solvent on the chemical integrity of the carbenoid. With this approach, high yields of the targeted compounds are consistently obtained under very high regiocontrol and, despite the basic nature of the reagents, no racemization of enantiopure materials is observed.

From reactive carbenes to chiral polyether macrocycles in two steps - synthesis and applications made easy?

Chiral polyether macrocycles are versatile molecules. For their preparation, original two-step procedures were recently developed and present the advantages of high concentration conditions and simple starting reagents (stable diazo reagents, small cyclic ethers, aliphatic or aromatic amines). Enantiopure materials are readily afforded by CSP-HPLC on a semi-preparative scale. Flexibility and adaptability in the macrocyclic design are provided by a large selection of amines to choose from while the ring size and chemical nature are controlled by the choice of 5 to 7-membered cyclic ether precursors. Such macrocycles have already been used as asymmetric catalysts, mono and ditopic receptors, fluorescent sensors and probes, and chiroptical reversible switches.

Spirobicyclic and Tetracyclic Pyrazolidinones: Syntheses and Properties

The stereoselective syntheses of spirobicyclic and tetracyclic pyrazolidinones are reported based on a (3+2) annulation between hydrazones and α‐oxoketenes. Some of these conformationally constrained molecules were resolved as enantiopure materials by HPLC techniques and evaluated as aminocatalysts for iminium activation in a model Diels–Alder cycloaddition.

Strategies for the Synthesis of Chiral Carbon-Bridged Group IV ansa-Metallocenes.

This minireview provides a survey of the various synthetic approaches to chiral ansa-metallocenes of Ti, Zr, and Hf containing a carbon-based bridge. The individual strategies to install substitution patterns at either the cyclopentadienyl framework or the bridging unit are highlighted with focus on the progress made towards a direct preparation of single complex stereoisomers. The review further includes the discussion of potential problems such as the formation of undesired diastereomers, the threat of racemization of enantiopure material, and synthetic challenges originating from the synthesis, purification, and isolation of the target complexes. The review has been written with the goal in mind to facilitate the design and synthesis of new chiral ansa-metallocene derivatives for emerging research areas in asymmetric catalysis and organometallic chemistry.

Strong circularly polarized luminescence of an octahedral chromium(iii) complex.

The chiral spin-flip luminophore [Cr(ddpd)2]3+ can be resolved into enantiopure material by chiral HPLC. The corresponding enantiomers show very high luminescence dissymmetry factors of up to ∣glum ∣≈ 0.093 in circularly polarized luminescence (CPL) measurements for the "ruby-like" phosphorescence transition 2E/2T1 → 4A2 in the near-IR region around λ ≈ 775 nm.

From glucose to enantiopure morpholino β-amino acid: a new tool for stabilizing γ-turns in peptides

“Environmentally sustainable” synthesis of a new enantiopure morpholino β-amino acid from glucose: a new tool for exotic peptide architectures.

Catalytic deracemization of chiral allenes by sensitized excitation with visible light.

Chiral compounds exist asenantiomers that are non-superimposable mirror images of each other. Owing to the importance of enantiomerically pure chiral compounds1-for example, as active pharmaceutical ingredients-separation of racemates (1:1 mixtures of enantiomers) is extensively performed2. Frequently, however, only a single enantiomeric form of a chiral compound is required, which raises the question of how a racemate can be selectively converted into a single enantiomer. Such a deracemization3 process is entropically disfavoured and cannot be performed by a conventional catalyst in solution. Here we show that it is possible to photochemically deracemize chiral compounds with high enantioselectivity using irradiation with visible light (wavelength of 420 nanometres) in the presence of catalytic quantities (2.5 mole per cent) of a chiral sensitizer. We converted an array of 17 chiral racemic allenes into the respective single enantiomers with 89 to 97 per cent enantiomeric excess. The sensitizer is postulated to operate by triplet energy transfer to the allene, with different energy-transfer efficiencies for the two enantiomers. It thus serves as a unidirectional catalyst that converts one enantiomer but not the other, and the decrease in entropy is compensated by light energy. Photochemical deracemization enables the direct formation of enantiopure materials from a racemic mixture of the same compound, providing a novel approach to the challenge of creating asymmetry.

Enabling Enantiopurity: Combining Racemization and Dual-Drug Co-crystal Resolution

A new process methodology to obtain enantiopure (S)-Ibuprofen has been designed. Starting from racemic Ibuprofen, co-crystallization with Levetiracetam is used as a resolution tool to obtain only the target enantiomer, (S)-Ibuprofen, in the solid state. The resulting mother liquor, enriched in (R)-Ibuprofen, is recovered and submitted to a racemization cycle, after which another co-crystallization step is introduced. Levetiracetam can be recovered from the co-crystal phase and reused, resulting in an economical use of the resolution agent. Overall, a novel approach to transform a racemic compound into enantiopure material has been developed.

Racemic and Enantiopure Camphene and Pinene Studied by the Crystalline Sponge Method.

The use of an achiral metal–organic framework for structure determination of chiral compounds is demonstrated for camphene and pinene. The structure of enantiopure β-pinene can be resolved using the crystalline sponge method. However, α-pinene cannot be resolved using enantiopure material alone because no ordering of guest molecules takes place in that case. Interestingly, enantiomeric pairs order inside the channels of the host framework when impure (+)-camphene is offered to the host, which is also the case when a racemic mixture of α-pinene is used. A mixture of (+)-α-pinene and (−)-β-pinene also leads to ordered incorporation in the host, showing the influence of the presence of an inversion center in the host framework. We further show that powder X-ray diffraction provides a direct view on incorporation of ordered guest molecules. This technique, therefore, provides a way to determine the optimal and/or minimal soaking time. In contrast, color change of the crystal only demonstrates guest uptake, not ordering. Moreover, we show that color change can also be caused by guest-induced host degradation.

Catalytic Kinetic Resolution of Saturated N-Heterocycles by Enantioselective Amidation with Chiral Hydroxamic Acids.

The preparation of enantioenriched chiral compounds by kinetic resolution dates back to the laboratories of Louis Pasteur in the middle of the 19th century. Unlike asymmetric synthesis, this process can always deliver enantiopure material (ee > 99%) if the reactions are allowed to proceed to sufficient conversion and the selectivity of the process is not unity (s > 1). One of the most appealing and practical variants is acylative kinetic resolution, which affords easily separable reaction products, and several highly efficient enzymatic and small molecule catalysts are available. Unfortunately, this method is applicable to limited substrate classes such as alcohols and primary benzylamines. This Account focuses on our work in catalytic acylative kinetic resolution of saturated N-heterocycles, a class of molecules that has been notoriously difficult to access via asymmetric synthesis. We document the development of hydroxamic acids as suitable catalysts for enantioselective acylation of amines through relay catalysis. Alongside catalyst optimization and reaction development, we present mechanistic studies and theoretical calculation accounting for the origins of selectivity and revealing the concerted nature of many amide-bond forming reactions. Immobilization of the hydroxamic acid to form a polymer supported reagent allows simplification of the experimental setup, improvement in product purification, and extension of the substrate scope. The kinetic resolutions are operationally straight forward: reactions proceed at room temperature and open to air conditions, without generation of difficult-to-remove side products. This was utilized to achieve decagram scale resolution of antimalarial drug mefloquine to prepare more than 50 g of (+)-erythro-meflqouine (er > 99:1) from the racemate. The immobilized quasienantiomeric acyl hydroxamic acid reagents were also exploited for a rare practical implementation of parallel kinetic resolution that affords both enantiomers of the amine products in high enantiopurity. The success of this process relied on identification of two cleavable acyl groups alongside implementation of flow-chemistry techniques to ensure reusability of the resolving agents. The work discussed in this Account has laid foundations for new catalyst design as well as development of desymmetrization and dynamic kinetic resolution processes. In the meantime, as all the requisite reagents are commercially available, we hope that hydroxamic acid promoted acylative kinetic resolution will become a method of choice for preparation of saturated N-heterocycles in enantiopure form.

Remarkable magnitude of the self-disproportionation of enantiomers (SDE) via achiral chromatography: application to the practical-scale enantiopurification of β-amino acid esters

We report the best performance yet for the self-disproportionation of enantiomers (SDE) via achiral chromatography as typically used in laboratories for the isolated yield of the excess enantiomer using N-acetyl β-amino acid ethyl esters. The results are the most convincing ever demonstration of the capability of the SDE for practical-scale enantiopurification as comparable, or even superior for some systems, to that of recrystallization. For example, from a sample of 94.4% ee, a yield of 71% of enantiopure material was isolated in a single chromatographic run. Moreover, the lack of an esoteric structural entity, e.g. strongly polarizing groups, such as, for instance CF3, highlights the fact that the phenomenon is not dependent on the presence of such and thus the process is relevant to any usual-type structure. In contrast to recrystallization, the procedure is predictable, general, and dependable, boding well for its widespread application in routine laboratory settings.

Cinchonidinium acetate as a convenient catalyst for the asymmetric synthesis of cis-stilbenediamines

Inexpensive and readily available cinchonidinium acetate is an effective catalyst for the syn-selective aza-Henry reaction of arylnitromethanes and aryl imines. The resulting masked cis-stilbenediamine products are produced in excellent diastereoselectivity and good enantioselectivity, and enantiopure material can be achieved via recrystallization. The features of the cinchona catalyst needed for selectivity are discussed, with specific emphasis on formation of a kinetically controlled syn-product without epimerization of the highly acidic α-nitro stereocenter.

Synthesis, Chiral Resolution, and Absolute Configuration of C2‐Symmetric, Chiral 9,9′‐Spirobifluorenes

AbstractRacemic 2,2′‐, 2,2′,7,7′‐, and 2,2′,3,3′‐substituted 9,9′‐spirobifluorenes were synthesised and successfully resolved by HPLC on a Chiralpak IA stationary phase on both analytical and semipreparative scales. Their absolute configurations were determined by comparison of their specific optical rotations with literature data or by comparison of retention times with independently prepared enantiopure material. These compounds are versatile C2‐symmetric building blocks for the formation of more sophisticated cleft‐like, chiral molecular architectures.