Elemental Profiles Research Articles

Essential and Nonessential Elements, Lipids and Volatile Compounds in Coffee and Transfer to Coffee Brews: Assessment of the Benefits and Potential Risks for Human Health

ABSTRACTCoffee is a popular beverage with significant commercial and social importance. The study aimed to determine the fatty acids profile, volatile compounds, and concentration of major and trace elements (Na, Mg, K, Ca, P, S, Fe, Mn, Cu, Zn, Cr, Ni, Cd, and Pb) in the two most important varieties of coffee, namely arabica and robusta. The leaching percentages of mineral elements and the effect of boiling time on the transfer of elements to aqueous extracts were also determined. In terms of fatty acids profile, the robusta variety was found to have a higher content of saturated fatty acids (46.68%) compared to the arabica variety (44.38%), whereas arabica contained a higher amount of omega‐6. Regarding the volatile compounds, arabica contained higher amounts of pyrazines (36%), ketones (5.4%), and furans (37.8%). The average contents of the major elements in roasted coffee (arabica and robusta) decreased in the order K > P > S > Mg > Ca > Na, while the trace elements content exhibited a decrease in the order Fe > Mn > B > Cu > Zn > Ni > Pb > Cd ≈ Cr. In coffee brews, the contents of elements have a similar decreasing trend, although variations in leaching percentages were observed. The health risk was assessed considering the concentrations of potentially toxic elements in coffee brews, and no health risks were indicated by the obtained scores. The contribution of coffee brews to the recommended dietary daily intake of essential elements is low. However, it can be significant considering that this beverage is consumed on a daily basis.

Investigate the important role of 3-D meteorological patterns in haze formation in the context of pollution reduction

Since 2013, heavy pollution episodes have occurred frequently over the North China Plain after unprecedented efforts to reduce primary pollutants. In this study, a pollution process in Tianjin, a typical city in North China, was selected to investigate the impact of 3-D meteorological patterns on PM2.5 and meteorological element profiles obtained by tethered balloons and meteorological towers. The pollution episode lasted 4 days with hourly PM2.5 concentrations exceeding 150 μg·m−3 for 81 h and a peak concentration of 377 μg·m−3. In the early stages of the first pollution period, wind speed with height showed an almost opposite trend to PM2.5 concentrations. In the vertical direction, weak winds were frequently accompanied by PM2.5 peaks, whereas strong winds were favourable for the diffusion of pollutants. In the later stage, a stable boundary layer with a height of approximately 600–700 m, thermal inversion layer capping the boundary layer, uniformly high-humidity atmosphere (>80 %), and relatively uniform distribution of wind speed across heights contributed to the high PM2.5, which remained within the boundary layer, and the continuous growth of surface PM2.5 concentrations. In the secondary pollution period, the successive regional transport of particles from Beijing and Baoding was the main reason for the two surface PM2.5 peaks in Tianjin. Different regional sources elevate PM2.5 levels, further extending the duration of haze pollution. The results reveal that 3-D meteorological conditions are the key reason for heavy pollution occurrence in the context of pollution reduction.

Elemental profile of Ipê species to support timber tracing in Amazon Rainforest

Accurate identification of geographical origin and species of wood is crucial for endorsing laws to combat illegal trade. Here, the multi-element profile of Ipê species of economic interest in Brazil was investigated by neutron activation analysis (NAA). Ba, Br, Ca, Ce, Co, Eu, Fe, K, La, Na, Rb, Sc, Sm, Sr and Zn were determined in the heartwood and sapwood tissues. The Random Forest algorithm identified Sr, Ba, Sm, La, Ce and Br as the most important elements for discriminating species. The analyses revealed significant differences between species and wood tissues, indicating that multi-element profile has great potential as a forensic tool. The establishment of comprehensive reference databases that cover large geographical areas and take into account the natural variability between species is fundamental to achieving this goal.

Research on roll profile thermal-force driving characteristics and joint control strategy in the multi-zone roll profile electromagnetic control technology

Roll profile electromagnetic control technology (RPECT) is a new roll gap shape control technology that can flexibly control the roll profile to meet the flatness control requirements of cold rolling mill. As basic control elements, electromagnetic sticks (ES) can drive the local zone bulging of electromagnetic control roll (ECR) to generate thermal-force contribution roll profiles. Due to the high order profile defects in the thin-gauge strip rolling process, the requirement of roll gap shape control in cold rolling mills is usually characterized by multi-zone and micro-scale. Therefore, a multi-zone roll profile electromagnetic control technology is proposed in this paper, which includes a multi-zone joint control strategy and a parameter preset method for basic control elements targeting roll profile. To conduct the parameterized impact analysis of stick distance and multi-stick control modes, a multi-zone joint control simulation model is established. Through the simulation analysis, the results show that it is feasible to use multiple basic control elements to adjust the multi-zone roll profile in the mechanism of action, and the total roll profile curve can be equivalent to the superposition of the individual bulging curve of different basic control elements with different space-time parameters. Meanwhile, the reasonable distance setting can effectively avoid the instability of thermal contribution roll profile control caused by too small distance between sticks and too strong thermal bulging driving. For the double-stick control mode or the three-stick control mode, using different temperature control method can assist ECR to realize the roll profile control goal that the low-order roll profile of the basic control element is superimposed to construct the high-order roll profile curve. According to strip flatness electromagnetic control experiment, the multi-zone joint control of RPECT can adjust the flatness defects above 100 IU to flat state, and can flexibly regulate local shape problems and control local buckling.

Convective mixing in distant and close-in giant planets. Dependences on the initial composition, luminosity, bloating, and semi-convection

Recent structure models of Jupiter suggest the existence of an extended region in the deep interior with a high heavy element abundance, referred to as a dilute core. This finding has led to increased interest in modelling the formation and evolution processes with the goal of understanding how and under what circumstances such a structure is formed and retained, to in turn better understand the relation between atmospheric and bulk metallicity. We modelled the evolution of giant planets, varying various parameters relevant for the convective mixing process, such as the mixing length parameter and the size of the mesh, and parameters related to the general evolution, such as the orbital distance and the initial luminosity. We in particular studied hot Jupiters and find that the effect of bloating on the mixing process is small but can in some cases inhibit convective mixing by lowering the intrinsic luminosity for a given entropy. Semi-convection can significantly lower the extent of a dilute core if it is strong enough. We find that dilute cores are unable to persist for initial luminosities much higher than $ 10^3$ L$_J$ for a Jupiter-like planet for the initial heavy element profiles we studied. From this we conclude that, based on our model, it is unlikely that a large number of giant planets retain a dilute core throughout their evolution, although this is dependent on the assumptions and limitations of our method. Future work should focus on improving the link between formation and evolution models so that the mixing process is accurately modelled throughout a planet's lifetime and on improving the understanding of how to model convection near radiative-convective boundaries.

Persistent legacy effects on soil microbiota facilitate plant adaptive responses to drought.

Both chronic and acute drought alter the composition and physiology of the soil microbiota, favoring the selection of microbes with functional traits that preserve fitness in these challenging conditions 1 . This drought-adapted microbiota may influence water-use efficiency mechanisms in host plants. Currently, it is largely unknown how this soil microbial drought legacy manifests at the molecular and physiological levels and how it influences microbe-dependent plant responses to drought in diverse natural soils. Here, to infer how drought legacy affects soil microbiota composition and function, we collected soils spanning two distinct and geographically distant precipitation gradients. By controlling for variation in numerous other soil properties including porosity and elemental profiles, we identified a group of bacterial taxa that are highly sensitive to water availability and critical for the formation of soil drought memory. Next, by imposing an acute experimental drought we show that this microbial drought legacy is robust to short-term perturbations. Furthermore, we reveal that soil microbiota from historically dry climates buffered a wild grass species native to the precipitation gradient, but not the domesticated crop species maize, from the negative effects of subsequent acute drought. In particular, microbiota with a legacy of chronic water limitation altered the expression of a small subset of host genes that mediate the effect of acute drought on transpiration and intrinsic water use efficiency. Our results reveal how long-term exposure to water stress alters soil microbial communities and demonstrate the resulting "legacy effects" on the drought responses of neighboring plants.

Recent depositional history of noble and critical elements in sediments from a wastewater-impacted bay (Vidy Bay, Lake Geneva, Switzerland)

Opposing trends in environmental pollution have been observed in recent years, with a growing awareness of the need to reduce emissions to the environment being accompanied by a concomitant increase in the use of polluting substances, which can potentially end up in the environment and harm humans and ecosystems. In order to assess the temporal evolution of loadings of seldom monitored trace elements, including noble metals and some technology critical elements, we analyzed a sediment core taken from the Bay of Vidy (Lake Geneva), impacted by the effluent of an urban wastewater treatment plant (WWTP). The temporal profiles of the chemical elements show essentially two patterns linked to the implementation of the WWTP, with some elements increasing sharply (e.g. Au, In, Ba, Sb, Sn, platinum group elements), while others (e.g. Ga, Ge, rare earth elements) show decreasing concentrations due to dilution by additional effluent particle loads. The origin of the elements showing a marked increase is attributed to local sources (photographic industry and municipal incinerator). There is (still?) no evidence in the sedimentary record of concentration increases linked to the growing use of technologically critical elements by industry.

Exploring the functional properties and utilisation potential of mollusca shell by-products through an interdisciplinary approach

Molluscan shellfish aquaculture contributes to 42.6% of global aquaculture production. With a continued increase in shellfish production, disposal of shell waste during processing is emerging as an environmental and financial concern. Whilst major commercial species such as Crassostrea spp. has been extensively investigated on usage of its shell, with information that are crucial for valorisation, e.g. safety and crystal polymorphs, evaluated. There is currently little understanding of utilisation opportunities of shell in several uprising Australian commercially harvested species including Akoya Oyster (Pinctada fucata), Roe’s Abalone (Haliotis roei) and Greenlip Abalone (Haliotis levigata), making it challenging to identify ideal usages based on evidence-based information. Therefore, in this study, an interdisciplinary approach was employed to characterise the shells, and thereafter suggest some potential utilisation opportunities. This characterisation included crude mineral content, elemental profiling and food safety evaluation. As well, physical, chemical, and thermal stability of the shell products was assessed. TGA result suggests that all shells investigated have high thermal stability, suggesting the possibility of utilisation as a functional filler in engineering applications. Subsequent FTIR, SEM and XRD analyses identified that CaCO3 was the main compositions with up to 77.6% of it found to be aragonite. The spectacular high aragonite content compared to well-investigated Crassostrea spp. suggested an opportunity for the utilisation of refined abalone shell as a source of biomedical engineering due to its potent biocompatibility. Additionally, safety evaluations on whole shell also outlined that all investigated samples were safe when utilised as a crude calcium supplement for populations > 11 years old, which could be another viable options of utilisation. This article could underpin abalone and akoya industries actions to fully utilise existing waste streams to achieve a more sustainable future.

Green biogenic synthesis of silver nanoparticles: a thoroughly exploration of characterization and biological efficacy

Conventional physical and chemical methods for synthesizing silver nanoparticles (AgNPs) often use reducing agents, and other chemicals that are harmful to the environment because of their toxic properties. This has prompted significant concern and the need to develop environmentally acceptable approaches. Due to the constraints of traditional chemicalphysical methods, green synthesis methods are being developed to fill these gaps by utilizing biological components extracted from plants. These plant-derived biomolecules are highly specific and facilitate the creation of metal nanoparticles. AgNPs, produced through these methods, possess a wide variety of metabolites with antibacterial effects. In light of this, the current investigation aimed to produce AgNPs using aqueous extracts obtained from Moringa leaves (Ml), Juniper leaves (Jl), and Juniper beans (Jb)via a green chemistry technique. Various analytical methods, including UV-visible spectrophotometry (UV-Vis), transmission electron microscopy (TEM), dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FT-IR), and energy-dispersive X-ray spectroscopy (EDX) analysis, were employed to characterize the synthesized AgNPs. After adding the plant extracts, the color of the aqueous silver nitrate solution noticeably changed to brown. Furthermore, a shift in absorption spectra was noted, with absorbance peaks appearing around λmax = 449.5 nm, 478.5 nm, and 440.5 nm for Juniper leaves, Jb, and Moringa extracts, respectively. DLS analysis revealed that the synthesized AgNPs varied in size and polydispersity index (PDI) values, with sizes of 108 nm (PDI = 0.246), 101 nm (PDI = 0.278), and 161 nm (PDI = 0.240) form Jl, Jb, and Ml extracts, respectively. These nanoparticles displayed no agglomeration and were stable over a long period. Transmission electron microscope/TEM analysis confirmed the synthesis of well/dispersed AgNPs with an average sizes of less than 22 nm, displaying different shapes likely due to the variety of capping agents present in the bean and leaf extracts. Elemental profiles showed a peak at 3 keV for the synthesized AgNPs, indicating a high proportion of silver elements in all three samples. The synthesized nanoparticles were also subjected to biological screening. The investigation involved testing their antibacterial activity against various bacterial and fungal strains. The Jlnano extract exhibited significant antifungal activity. Conversely, the aqueous and nano-extracts of Ml showed less effectiveness against fungal growth. The plant nano extracts, in particular, demonstrated a clearer effect against all tested fungi compared to the plant aqueous extracts. Among the AgNPs synthesized, those from Moringa extract had the greatest effect on Gram-positive bacteria (S. aureus), with an inhibitory zone diameter of 4.5 mm.

Ground-Based Remote Standoff Laser Spectroscopies and Reflectance Spectral Imaging for Multimodal Analysis of Wall Painting Stratigraphy.

This paper presents a novel multimodal remote sensing setup to analyze the complex stratigraphy of historical wall paintings at distances of order 10 m. The proposed method enables comprehensive investigation of the chemical composition of multilayer paint stratigraphy by combining standoff laser-induced breakdown spectroscopy for elemental profiling with noninvasive standoff Raman spectroscopy and visible and near-infrared (400-900 nm) reflectance spectral imaging for depth-resolved complementary material characterization from a range of distances with instruments and operators located on stable ground. Following proof-of-concept laboratory tests, the feasibility and effectiveness of this standoff analytical approach is demonstrated through field analysis of a whitewashed historical wall painting, successfully identifying at least seven distinct layers from a distance of 7 m. The remote sensing method presented here can also be applied to other scientific and industrial domains to characterize the chemical composition of layered materials at a distance.

Elemental profiling of the root samples of six species of the genus Sida L

IntroductionSida L. is a medicinally important genus comprising many species used in the traditional systems of medicine in different parts of the world. The present study deals with the elemental analysis of the root samples of six species of Sida L. viz., S. alnifolia L., S. beddomei Jacob., S. fryxelli Sivar. & Pradeep., S. rhomboidea Roxb. ex. Flemming., and S. keralensis E. S. S. Kumar, Shailaja, Sreekala, Parthipan & R. Prakashkumar sp. nov. Materials and methodsField explorations were carried out in Kerala, India, and root samples of different species were collected, shade-dried, and powdered. The powdered root samples of each species were analyzed using Atomic Absorption Spectrophotometer (AAS), and Flame Photometer. ResultsThe presence of Sodium (Na), Potassium (K), Calcium (Ca), Magnesium (Mg), Iron (Fe), Zinc (Zn), Manganese (Mn), Copper (Cu), Cadmium (Cd), Chromium (Cr), Nickel (Ni), and Lead (Pb) were detected in the species of Sida L. under study. The most abundant macro-element was detected as K, ranging from 15,630±0.21 mg kg−1 in S. rhomboidea to 24,910±0.14 mg kg−1 in S. beddomei. Among the micro-elements, Fe was present in higher concentrations ranging from 461.7 ± 193.96 mg kg−1 in S. cordata to 1363.93±192.90 mg kg−1 in S. beddomei. Toxic metals like Cr, Cd, Ni, and Pb were below detectable levels. ConclusionThe elemental composition of the species under study was quite different but within the permissible limits recommended by WHO. The current study revealed that the species of Sida L. under study could be valuable for Ayurvedic practitioners and traditional healers in developing herbal formulations.

Dissecting the genetic features and evolution of Staphylococcus aureus sequence type 88: a global perspective.

Staphylococcus aureus sequence type (ST) 88, encompassing both methicillin-resistant S. aureus (MRSA) and methicillin-sensitive S. aureus (MSSA) phenotypes, is globally prevalent and commonly associated with skin and soft tissue infections. Despite its widespread occurrence, comprehensive genomic studies on this clone remain scarce. In this study, we performed detailed genomic analyses on 130 ST88 isolates derived from severe bloodstream infections alongside 275 publicly available ST88 sequences. Our phylogenetic analysis identified four distinct clades, with evidence suggesting independent evolution and significant clonal expansion of ST88 in China, particularly within clade I, which appeared to have emerged circa 1964. We documented notable interregional, international, and even intercontinental transmission of ST88 isolates. Variability in the distribution of SCCmec and spa types was observed across clades. Our in silico analyses indicated distinct patterns in the distribution of resistance genes, virulence genes, and mobile genetic elements among the clades, with clade I notably harboring the highest prevalence of the intact sraP gene and an independently acquired novel prophage, φST88-1. Conversely, clade IV exhibited deletions within the sasC gene, with certain sub-clades lacking the sdrDE and fnbB genes, underscoring the superior adhesive capabilities of clade I. In vitro experiments confirmed enhanced biofilm formation in clade I isolates, although the levels of hemolysis and cytotoxicity were similar across clades. Pan-genome-wide association study revealed that core SNPs, rather than the accessory genome, are the primary contributors to the diversification of the ST88 clades. These findings enrich our understanding of the genetic foundations underpinning the transmission dynamics and phenotypic diversity of ST88 clones globally.IMPORTANCEUnderstanding the evolution and transmission of Staphylococcus aureus ST88 clones is critically important due to their spread within food, hospital, and community environments, leading to significant health issues. Despite its prevalence, detailed genomic insights into ST88, particularly regarding its diversity and evolutionary dynamics, have been lacking. Our comprehensive genomic analysis of 130 ST88 isolates from severe bloodstream infections, alongside 275 sequences from public databases, significantly advances our understanding of this pathogen. We identified four distinct evolutionary clades, demonstrating the independent evolution and substantial clonal expansion of ST88 in China, as well as its ability to spread across regions and continents. The diversity among the isolates was evident in their unique profiles of SCCmec elements, antibiotic resistance genes, virulence genes, and mobile genetic elements. Our findings underscore the critical role of core genomic variations over accessory elements in driving the diversification of ST88. This enhanced understanding provides new insights that could inform more effective control strategies, crucial for developing interventions to combat the global spread of this formidable pathogen.

Assessment of proximate composition, mineral element profile and antioxidant properties of the edible oyster mushroom grown in Bangladesh

Mushrooms have been considered as a therapeutic and nutrient-rich foods in numerous countries for years due to their significant levels of nutritional components, vitamins and antioxidants. This study aimed to assess the nutrient content, mineral profile and antioxidant properties of eight different kinds of oyster mushrooms (Pleurotus sp.) cultivated in Bangladesh. The mushrooms were analyzed for their moisture content, carbohydrates, proteins, fats, fibers, ash, vitamin A, and vitamin C. The mineral profile included sodium, potassium, calcium, and iron, as well as heavy metals. Antioxidant activities were evaluated through various methods, including phenolic, flavonoid and tannin content, total antioxidant activity, and DPPH (2,2-diphenyl-1-picryl-hydrazyl) scavenging capacity. The findings revealed that the mushrooms under investigation were high in carbohydrate (ranges between 45.25 and 63.22 g/100 g), protein (23.48–33.16 g/100 g) and dietary fiber (42.87–52.31 g/100 g). The total ash content was ranged from 7.28 to 9.41 g/100 g and vitamin C content was 0.020–0.416 mg/100 g. Interestingly, all of the mushrooms had a lower fat content (0.91–2.6%). The mineral profile indicated the presence of varying concentrations of essential elements. Hazardous heavy metals, such as Cd and Cr were not detected in the mushroom sample, while As and Pb were detected but lower than the tolerance levels. The oyster mushrooms exhibited high levels of phenolic, flavonoid, and tannin contents, as well as significant antioxidant capacity. A methanol extract of the oyster mushrooms exhibited scavenging activity against DPPH in a dose dependent manner with the highest capacity (75.4%) obtained at a concentration of 0.2 mg/ml. Our result suggests that these studied oyster mushrooms could be a good source of nutrition and antioxidants, which could be used as functional foods.

SIMS and Numerical Analysis of Asymmetrical Out-Diffusion of Hydrogen and Carbon in CdxZn1-xO:Eu Multilayer.

This study employs secondary ion mass spectrometry (SIMS) to investigate the diffusion behavior of hydrogen and carbon in a CdxZn1-xO:Eu multilayer at different annealing temperatures (500-900 °C). The SIMS results reveal a significant out-diffusion of these elements toward the surface and diffusion to the interface region. The diffusion flow rates are asymmetric and favor the interface direction. The depth profiles of diffused elements are fitted using the forward timecentered space (FTCS) iteration method. The activation energies are determined to be 0.35 ± 0.06 eV for hydrogen and 0.33 ± 0.09 eV for carbon, suggesting an interstitial mechanism in CdxZn1-xO. The results indicate that increasing the annealing temperatures leads to a significant decrease in impurity concentrations.

Authenticating the Geographical Origin of Jingbai Pear in Northern China by Multiple Stable Isotope and Elemental Analysis.

The Jingbai pear is one of the best pear species in China with high quality and nutrition values which are closely linked to its geographical origin. With the purpose of discriminating the PGI Mentougou Jingbai pear from three other producing regions, the stable isotope ratios and elemental profiles of the pears (n = 52) and the corresponding soils and groundwater were determined using isotope ratio mass spectrometry (IRMS) and inductively coupled plasma mass spectrometry (ICP-MS), respectively. The results revealed that δ15N, δ18OJ, and Li were significantly different (p < 0.05) in samples from different regions, which indicated their potential to be used in the geographical origin classification of the Jingbai pear. The nitrogen isotopic values of the pear pulp were positively correlated with the δ15N value and nitrogen content of the corresponding soils, whilst the B, Na, K, Cr, and Cd contents of the pear pulps were positively correlated with their corresponding soils. Orthogonal partial least squares discriminant analysis (OPLS-DA) was performed in combination with analysis of the stable isotopes and elemental profiles, making it possible to distinguish the cultivation regions from each other with a high prediction accuracy (a correct classification rate of 92.3%). The results of this study highlight the potential of stable isotope ratios and elemental profiles to trace the geographical origin of pears at a small spatial scale.

Multivariate Modelling Based on Isotopic, Elemental, and Fatty Acid Profiles to Distinguish the Backyard and Barn Eggs.

The ability to trace the origin of eggs from backyard-raised hens is important due to their higher market value compared to barn-raised eggs. This study aimed to differentiate eggs from these two rearing systems using isotopic, elemental, and fatty acid profiles of egg yolks. A total of 90 egg yolk samples were analyzed, analytical results being followed by statistical tests (Student's t-test) showing significant differences in δ18O, several elements (Mg, K, Sc, Mn, Fe, Ni, Cu, Zn, As, Cd, Ba, Pb), and fatty acids compositions (C23:0, C17:0, C18:0, C16:1n7, C18:1n9, C18:2n6, C20:1n7, C20:4n6, C20:5n3, C22:6n3), as well as in the ratios of SFA, PUFA, and UFA. The results indicated a nutritional advantage in backyard eggs due to their lower n-6 polyunsaturated fatty acid content and a more favorable n-6 to n-3 ratio, linked to differences in the hens' diet and rearing systems. To classify the production system (backyard vs. barn), three pattern recognition methods were applied: linear discriminant analysis (LDA), k-nearest neighbor (k-NN), and multilayer perceptron artificial neural networks (MLP-ANN). LDA provided perfect initial separation, achieving 98.9% accuracy in cross-validation. k-NN yielded classification rates of 98.4% for the training set and 85.7% for the test set, while MLP-ANN achieved 100% accuracy in training and 92.3% in testing, with minor misclassification. These results demonstrate the effectiveness of fusion among isotopic, elemental, and fatty acid profiles in distinguishing backyard eggs from barn eggs and highlight the nutritional benefits of the backyard-rearing system.

Enhancer landscape of lung neuroendocrine tumors reveals regulatory and developmental signatures with potential theranostic implications

Well-differentiated low-grade lung neuroendocrine tumors (lung carcinoids or LNETs) are histopathologically classified as typical and atypical LNETs, but each subtype is still heterogeneous at both the molecular level and its clinical manifestation. Here, we report genome-wide profiles of primary LNETs' cis-regulatory elements by H3K27ac ChIP-seq with matching RNA-seq profiles. Analysis of these regulatory landscapes revealed three regulatory subtypes, independent of the typical/atypical classification. We identified unique differentiation signals that delineate each subtype. The "proneuronal" subtype emerges under the influence of ASCL1, SOX4, and TCF4 transcription factors, embodying a pronounced proneuronal signature. The "luminal-like" subtype is characterized by gain of acetylation at markers of luminal cells and GATA2 activation and loss of LRP5 and OTP. The "HNF+" subtype is characterized by a robust enhancer landscape driven by HNF1A, HNF4A, and FOXA3, with notable acetylation and expression of FGF signaling genes, especially FGFR3 and FGFR4, pivotal components of the FGF pathway. Our findings not only deepen the understanding of LNETs' regulatory and developmental diversity but also spotlight the HNF+ subtype's reliance on FGFR signaling. We demonstrate that targeting this pathway with FGF inhibitors curtails tumor growth both in vitro and in xenograft models, unveiling a potential vulnerability and paving the way for targeted therapies. Overall, our work provides an important resource for studying LNETs to reveal regulatory networks, differentiation signals, and therapeutically relevant dependencies.

The Silent VOICE—Searching for Geochemical Markers to Track the Impact of Late Jurassic Rift Tectonics

AbstractA causal mechanism for the Volgian Isotopic Carbon Excursion (VOICE) remains enigmatic. Elemental geochemical profiles of the Deer Bay Formation, Sverdrup Basin, Arctic Canada that record the VOICE and contemporaneous strata are herein examined to provide insight into depositional environments during Late Jurassic‐Early Cretaceous time. Silver (Ag) and Cadmium (Cd) are enriched across the VOICE at localities on Axel Heiberg Island, and in Tithonian (∼Volgian) strata of Ellef Ringnes Island. Other redox‐sensitive trace elements do not exhibit spatially or temporally consistent patterns and indicate oxic conditions. A lack of relationship across the VOICE between Ag and the quality, quantity, and isotopic composition of organic matter suggests that the negative isotope excursion and interval of Ag enrichment are not merely functions of changes in organic matter source or amount, while a lack of spatially consistent change in geochemical indices of weathering similarly excludes climate change and/or sediment provenance as a driver. Therefore, in a ventilated setting and without marked changes in organic matter content, Ag enrichment may be due to hydrothermal activity. Contemporaneous Ag enrichment in strata from Svalbard suggests that a source of hot fluid sufficient to produce Ag‐rich seawater may have been related to rifting in the adjacent proto‐Amerasia Basin. Hydrothermal activity may also have been a widespread source of isotopically depleted carbon. This work develops new geochemical fingerprints that may be used to trace the spatial extent of hydrothermal events that do not leave an extinction pattern but may nonetheless have a far‐reaching influence on biogeochemical systems.

Evaluation of Oxidative Stress, Anti-Oxidant, Vitamins and Co-Factor Elements in The Sera of Gastric Cancer in Iraqi Patients.

The objective of this study is to analyze oxidative stress markers Total Oxidant Status (TOS) and total Antioxidant Status (TAS), assess antioxidant levels (vitamin C, E), and evaluate co-factor element profiles zinc (Zn), copper (Cu), iron (Fe) in the serum of Iraqi gastric cancer patients. By elucidating these relationships, the research aims to enhance knowledge on oxidative stress, dietary factors, and potential therapeutic approaches for managing nutritional imbalances in this cohort. The study included 60 gastric cancer patients and 60 matched controls. Blood samples were collected and serum was extracted for analysis of TOS, TAS, Vitamin C, Vitamin E, copper, zinc, and iron levels. Measurements were conducted using spectrophotometry and ELISA kits from various companies. Statistical analysis was performed with IBM SPSS 25.0, presenting results as means ± SD, and differences between groups were assessed via independent samples t-test at p < 0.05 and p ≤ 0.01. The study results indicated statistically significant differences between gastric cancer patients and controls in various biomarkers, with all comparisons showing p-values less than 0.001. This suggests strong evidence for the observed differences between the two groups in (TOS), (TAS), vitamins C and E, Cu, Zn, and Fe levels. These relationships underscore the intricate connections among biomarkers in gastric cancer pathophysiology. The study underscores the intricate relationship between oxidative stress, antioxidant depletion, and micronutrient imbalances in gastric cancer. These findings offer valuable insights into the disease's pathophysiology, indicating potential diagnostic biomarkers. Further research is warranted to unravel underlying mechanisms and explore clinical applications for early gastric cancer diagnosis.

Features of hear microelement composition in children with type 1 diabetes mellitus

Objective: Assessment of the characteristics of the microelement composition of the hair of children with type 1 diabetes mellitus (T1DM) to develop recommendations for diet correction. Material and methods. The study involved children with T1 DM (n=28) and practically healthy children from the comparison group (n=56) aged 3-5 years living in the Omsk region. The elemental composition of hair was analyzed by atomic emission and mass spectrometry with inductively coupled argon plasma. The research materials were subjected to statistical processing using nonpara-metric criteria. Results. The elemental profile of hair of children with T1 DM has been determined. Significant differences were found in the amounts of microelements in hair: lower values of beryllium (p=0.0001), chromium (p=0.003), lithium (p=0.005), vanadium (p=0.005), selenium (p=0.043), and large amounts of cuprum (p=0.025), phosphorus (p=0.001) in the hair of children with diabetes in comparison with the group of practically healthy ones. In the group of children with T1DM, there was a smaller proportion of people with insufficient magnesium (p=0.003), phosphorus (p=0.001), and cuprum (p=0.001). The severity of mineral metabolism disorders (MMD) was less in the group of children with T1DM: 53.6% of children were classified as having no MMD or having minor MMD. Conclusions. The elemental composition of the hair of children with T1DM was characterized by higher amounts of phosphorus and cuprum, lower content of chromium, selenium, beryllium, lithium and vanadium. The proportion of children with insufficient supply of magnesium, phosphorus, cuprum was higher in the comparison group. The degree of MMD in the group of children with T1 DM was generally less.