Electrophilic Aromatic Substitution Research Articles

Synthesis of anthraquinone-based azo-metal(II) complexes as potent anti-oxidizing agents

The 3-diethylaminophenol (3-DEAP) incorporated anthraquinone mono-azo dye derivative [(E)-1-((4-(diethylamino)-2-hydroxyphenyl)diazenyl)anthracene-9,10-dione] DAAD was synthesized through an electrophilic substitution reaction. The interaction between the -OH functional group and the nitrogen atom of the azo moiety may result in intramolecular proton transfer in the DAAD. DAAD was treated with metal ions such as Co(II), Ni(II), and Cu(II) acetates in a ratio of 2 : 1 revealing an octahedral structure. Many analytical and spectroscopic methods, including UV-vis, FT-IR, (1H and 13C) NMR, HRMS, TGA, VSM, ESR, and powder XRD methods, were used to verify the structural characteristics of the compounds. Additionally, the potency of the in-vitro antioxidant properties of the ligand and its Cu(II), Ni(II), and Co(II) complexes were evaluated; the results revealed that the Co(II) complex showed a maximum percent inhibition of 85 μM against the standard ascorbic acid.

Triflic acid-promoted Friedel–Crafts-type carbocyclization of alkenylated biphenyl derivatives: Synthesis and photophysical studies of novel 9,10-dihydrophenanthrenes

An efficient metal-free, triflic acid-promoted intramolecular Friedel–Crafts-type carbocyclization of alkenylated biphenyl derivatives is discussed. This method provides an elegant route for the construction of 9,10-dihydrophenanthrenes of biological significance in good to excellent yields. The carbocyclization reaction is likely to proceeds via activation of terminal CC bond of alkenylated biphenyl derivatives followed by subsequent aromatic electrophilic substitution to give desired carbocyclic products. Single crystal X-ray diffraction analysis of compound 10d revealed that the crystals are packed in AB-AB layer packing, where the molecules are aligned in anti-parallel fashion. Notably, all of the synthesized 9,10-dihydrophenanthrenes exhibited blue to greenish yellow fluorescence with λmax = 418–481 nm range. The stokes shift, quantum yield and optical band gap of tricyclic products were computed using their absorption and emission spectra. A significant positive solvatochromic effect was observed for 9,10-dihydrophenanthrene derivative 10l, which is a characteristic of ICT interactions.

Online Charge-Generation Derivatization by Electrochemical Radical Cations of Thianthrene: Mass Spectrometry Imaging of Estrogens in Biological Tissues.

Estrogens play a significant role in endocrinology and oncology. Although separation methods coupled with mass spectrometry (MS) have emerged as a powerful tool for studying estrogens, imaging the spatial distributions of estrogens is crucial but remains challenging due to its low endogenous concentration and poor ionization efficiency. Charge-generation derivatization, such as N-alkylpyridinium quaternization and S-methyl thioetherification, represents a method wherein neutral molecules involving analytes and derivatization reagents undergo chemical reactions to establish permanent charges directly onto the analytes to improve detection sensitivity. Here, we developed a novel derivatization reagent, thianthrene (TT), which enabled oxidization to radical cations ([TT]•+) using an electrochemical method and completed the online charge-generation derivatization of estrogens on a mass spectrometry imaging platform. In this strategy, [TT]•+ can efficiently and selectively derivatize estrogens via an electrophilic aromatic substitution reaction. Results indicated that derivatization with [TT]•+ can significantly enhance imaging sensitivity (3 orders of magnitude), enabling the visualization of estrogen and its metabolites in ovarian and breast tissues. Furthermore, a higher mass intensity of these estrogens was captured in breast para-cancerous tissues than in cancerous tissues, which might provide estrogens spatial dimension information for further research on the initiation and progression of breast cancer.

Effect and mechanism of polyphenols containing m-dihydroxyl structure on 2-amino-1-methyl-6-phenylimidazole [4, 5-b] pyridine (PhIP) formation in chemical models and roast pork patties

2-amino-1-methyl-6-phenylimidazole [4, 5-b] pyridine (PhIP) is a prevalent heterocyclic amine (HAA) found in heated processed meat. This study investigated the inhibitory impact of eight different types of polyphenols containing m-dihydroxyl structure on PhIP formation through a chemical model system. The structure-activity relationship and potential sites of action of polyphenols containing m-dihydroxyl structure were also analyzed. Then, the mechanism of inhibiting PhIP formation by kaempferol, naringenin and quercetin was speculated by UPLC-MS. Results showed that 8 kinds of polyphenols containing m-dihydroxyl structure had significant (P < 0.05) inhibition on the formation of PhIP in the chemical model system in a dose-dependent manner. In addition, PhIP was most significantly inhibited by naringenin at the same concentration, followed by kaempferol and quercetin (83.27%, 80.81% and 79.26%, respectively). UPLC-MS results speculated that kaempferol, naringenin, and quercetin formed a new admixture via an electrophilic aromatic substitution reaction with the intermediate product phenylacetaldehyde, preventing the formation of PhIP.

InCl3-Catalyzed One-Pot Synthesis of Pyrrolo/Indolo- and Benzooxazepino-Fused Quinoxalines.

In this paper, we describe an efficient InCl3-catalyzed two-component reaction of 1-(2-aminophenyl)pyrroles/indoles and 2-propargyloxybenzaldehydes for the direct synthesis of 12bH-benzo[6,7]1,4-oxazepino[4,5-a]pyrrolo/indolo[2,1-c]quinoxalines. This high atom- and step-economical one-pot process generates three new C/N-C bonds in a single synthetic operation, resulting in the formation of new six- and seven-membered heterocyclic rings. The easy availability of the starting materials, the use of the relatively inexpensive indium catalyst, and the good substrate scope are the salient features of this strategy. The proposed mechanistic pathway involves imine formation, two consecutive cyclizations via electrophilic aromatic substitution and nucleophilic addition reactions, and the H shift step.

An Indium(III) Triflate Catalyzed Simple and Efficient One-Pot Synthesis of Substituted 3,3-Diaryloxindoles and Bis(indol-3-yl) methanes from Indoles and Isatins or Aryl Aldehydes

AbstractIndium(III) triflate was found to be an efficient metal catalyst for the electrophilic substitution reaction of substituted indoles with various isatins or aryl aldehydes in acetonitrile solvent to afford the corresponding 3,3-diaryloxindoles or bis(indol-3-yl)methanes, respectively, in high yields at room temperature. This new procedure has remarkable features such as experimental simplicity, high conversions, good to excellent yields, short reaction times, and simple workup procedures

Structural modification of electrophilic group substituted phenyldiazenyl derivatives for antitubercular application

In the present work, four electrophilic group substitute phenyldiazenyl derivatives were synthesized using an electrophilic substitution reaction. The physicochemical analysis was carried out using FT-IR, 1H NMR, and HR-MS data. The photophysical studies were carried out using theoretical methods. Density functional theory was employed to illustrate the electronic and optical characteristics of the synthesized compounds. The HOMO-LUMO energies were theoretically computed in different solvents using Gaussian 09W software and results are compared with the experimental values. The molecule PT4 shows highest bandgap of 4.497eV. Further, the global chemical reactivity descriptors were used to determined nature of chemical reactivity. The anti-tubercular activity was evaluated using invitro and molecular docking techniques and results reveal that barbituric acid coupled with phenyldiazenyl displayed excellent anti-tubercular activity compared with the standard Gentamycin.

Synthesis, Molecular Electron Density Theory Study, Molecular Docking, and Pharmacological Evaluation of New Coumarin-Sulfonamide-Nitroindazolyl-Triazole Hybrids as Monoamine Oxidase Inhibitors.

Inhibitors of monoamine oxidases (MAOs) are of interest for the treatment of neurodegenerative disorders and other human pathologies. In this frame, the present work describes different synthetic strategies to obtain MAO inhibitors via the coupling of the aminocoumarin core with arylsulfonyl chlorides followed by copper azide-alkyne cycloaddition, leading to coumarin-sulfonamide-nitroindazolyl-triazole hybrids. The nitration position on the coumarin moiety was confirmed through nuclear magnetic resonance spectroscopy and molecular electron density theory in order to elucidate the molecular mechanism and selectivity of the electrophilic aromatic substitution reaction. The coumarin derivatives were evaluated for their inhibitory potency against monoamine oxidases and cholinesterases. Molecular docking calculations provided a rational binding mode of the best compounds in the series with MAO A and B. The work identified hybrids 14a-c as novel MAO inhibitors, with a selective action against isoform B, of potential interest to combat neurological diseases.

Dual-functional metal-organic framework for chemisorption and colorimetric monitoring of cyanogen chloride

Given the growing concern over the deployment of toxic chemicals in warfare, the rapid and accurate removal and detection of cyanogen chloride (CK) as a blood agent has become increasingly critical. However, conventional physisorbents and chemisorbents used in military respirators are insufficient for the effective removal of CK. In this study, we demonstrate the chemisorption and sensing abilities of Co2(m-DOBDC) (m-DOBDC4− = 4,6-dioxo-1,3-benzenedicarboxylate) for CK via electrophilic aromatic substitution (EAS) in humid environments. Unlike the chemisorption in triethylenediamine (TEDA) impregnated carbon materials, which generates by-products through hydrolysis, the electron-rich C5 sites in m-DOBDC4− ligands give rise to cyano substitution with CK. This leads to the formation of stable C–C bonds and chloride ions (Cl−) coordinating with open Co2+ sites. Such a mechanism prevents the generation of toxic by-products like cyanic acid and hydrochloric acid. Breakthrough experiments conducted in a packed-bed system conclusively demonstrated the superior CK removal capacity of Co2(m-DOBDC) (1662 min/g), compared to TEDA-impregnated activated carbon (323 min/g) under humid conditions. Considering that MOF-74 series, isostructural with Co2(m-DOBDC), barely adsorb CK under similar conditions, this finding marks a significant advancement in developing novel sorbents for CK removal. Moreover, this chemisorption not only exhibited rapid and highly efficient CK removal but also enabled colorimetric monitoring via the distinctive color change induced by the coordination of Cl− acting as σ donors. These findings facilitate the development of adsorption and sensing equipment to protect military personnel from toxic chemical threats.

Pd‐Catalyzed [3+6+3+6] Macrocyclizations of Aryl α‐Diazo‐β‐Ketoesters

AbstractThanks to Pd(II)‐catalysis, an efficient synthesis of unsaturated macrocycles is achieved by [3+6+3+6] condensation of cyclic ethers with aryl α‐diazo‐β‐ketoesters. The presence of the electron‐rich aryl ester moieties forbids the use of dirhodium complexes as these diazo decomposition catalysts provoke unforeseen intermolecular Csp2−H insertion reactions that derail the targeted reactivity. However, with Pd(acac)2, using high concentration conditions (1 M), a variety of 18‐membered macrocycles (16 examples) is afforded with both aryl and alkyl diazo reagents. Catalyst selection for either electrophilic aromatic substitution (Rh) or ylide (Pd) pathways are explained by computational approaches.

Metallaphotoredox deuteroalkylation utilizing thianthrenium salts

Deuterium labeling compounds play a crucial role in organic and pharmaceutical chemistry. The synthesis of such compounds typically involves deuterated building blocks, allowing for the incorporation of deuterium atoms and functional groups into a target molecule in a single step. Unfortunately, the limited availability of synthetic approaches to deuterated synthons has impeded progress in this field. Here, we present an approach utilizing alkyl-substituted thianthrenium salts that efficiently and selectively introduce deuterium at the α position of alkyl chains through a pH-dependent HIE process, using D2O as the deuterium source. The resulting α-deuterated alkyl thianthrenium salts, which bear two deuterium atoms, exhibit excellent selectivity and deuterium incorporation in electrophilic substitution reactions. Through in situ formation of isotopically labelled alkyl halides, these thianthrenium salts demonstrate excellent compatibility in a series of metallaphotoredox cross-electrophile coupling with (hetero)aryl, alkenyl, alkyl bromides, and other alkyl thianthrenium salts. Our technique allows for a wide range of substrates, high deuterium incorporation, and precise control over the site of deuterium insertion within a molecule such as the benzyl position, allylic position, or any alkyl chain in between, as well as neighboring heteroatoms. This makes it invaluable for synthesizing various deuterium-labeled compounds, especially those with pharmaceutical significance.

Selenosulfones, a Meetup of Chalcogens: A Journey Into Their Recent Chemistry

AbstractA mini review focused on the chemistry of selenosulfones reported since 2019 is here presented. Initially, methods aimed to the preparation of such moiety are discussed. Successively 1,2‐, 1,3‐, 1,4‐ and 1,7‐addition reactions to C−C single and multiple bonds are illustrated. The forth chapter focuses on electrophilic aromatic substitutions. The fifth chapter deals with C−H functionalizations while the sixth one shows the reactions with aryl diazonium salts or its precursors. The radical coupling with redox active reagents, is the subject of section seventh. Selenosulfones challenged in nucleophilic substitutions and in reactions with phosphorus‐containing compounds are shown in chapter eight and nine followed by the conclusions and perspectives section.

An Exceptional Valorization of CuO Nanoparticles in Ionic Liquids as an Efficient Medium for the Electrophilic Substitution of Indole Towards the Formation of Bis(indolyl)methanes

Aim: Ionic liquids are promising green solvents with simple but unique structure-related physical properties such as negligible vapour pressure, exceptional thermal conductivity, remarkable thermal stability and their suitability and inertness towards a broad range of catalytic applications. CuO NPs have been addressed as a cost-effective and a reagent of a choice that necessitates only mild reaction conditions to offer a high yield of the desired products with exceptional selectivity in a short duration of time. Therefore, in the present work, attempts have been made to explore the catalytic potentials of CuO NPs in an ionic liquid medium to synthesize biologically important bis(indolyl)methanes. Background: Catalytic explorations of metal oxide nanoparticles in ionic liquids offers a cooperative effect that has a significant impact on the kinetics as well as on the outcome of the reaction. Therefore, such catalytic systems in the present times have seized the scientific community's interest from the perspectives of sustainable development in synthetic organic chemistry. The combination of metal oxide nanoparticles with highly tunable ionic liquids is not only used to synthesize simple organic molecules but also explored in the synthesis of complex organic molecules of high commercial and biological relevance. Objectives: The current work offers a rapid and robust protocol for synthesizing bis(indolyl)methanes via electrophilic substitution reaction between indole and various aldehydes in the presence of a CuO nanoparticles-ionic liquid system. The discussion focuses on the high tolerance of different functionalities by the catalytic system leading to the synthesis of bis(indolyl)methanes. Methods: CuO NPs have been synthesized via the co-precipitation method using ionic liquid. The applicability of metal oxide nanoparticles-IL matrix was further investigated in synthesizing bis(indolyl)methanes. Results: The FT-IR absorption below 600 cm-1 and the XRD pattern showing all the peaks in the diffraction diagram revealed the formation of CuO NPs. FESEM images show the flake-shaped morphology of CuO NPs and are found to be separated from the agglomerated clusters Conclusion: Ionic liquid-CuO NPs matrix reveals good to exceptional catalytic properties, and their advancements as a catalytic system at room temperature open new avenues for synthetic organic chemists.

Synthesis of 3, 3′- bis (indolyl) methanes using Bio-Waste metal free super acid as efficient with recyclable catalysts

A bio-waste metal free sulfonated carbonaceous super acid catalyst (BWC) is generated from sodium lignosulphonate, which is obtained from bio-waste sulphite pulping process of paper making industries. Here, we report a highly efficient catalytic a sulphonated carbon material catalyzed electrophilic substitution reactions of indoles with aromatic aldehydes to afford 3,3′-bisindolylmethane (BIM) derivatives. The synthesized BIM compounds were characterized by modern analytical techniques like NMR, MS, FT-IR, CHNS analysis. The BWC green catalyst was characterized by FT-IR, thermal gravimetric analysis (TGA) scanning electron microscopy (SEM), thermal electronic microscopy (TEM) with elemental analysis. The significant features of this catalysis are easy catalyst preparation, high product yields, environmental benignity, short reaction time, broad substrate scope, with use of non-toxic solvents. The catalysts could be recycled with reused three times without decrease in the catalytic activity significantly.

The Different Strategies for the Radiolabeling of [211At]-Astatinated Radiopharmaceuticals.

Astatine-211 (211At) has emerged as a promising radionuclide for targeted alpha therapy of cancer by virtue of its favorable nuclear properties. However, the limited in vivo stability of 211At-labeled radiopharmaceuticals remains a major challenge. This review provides a comprehensive overview of the current strategies for 211At radiolabeling, including nucleophilic and electrophilic substitution reactions, as well as the recent advances in the development of novel bifunctional coupling agents and labeling approaches to enhance the stability of 211At-labeled compounds. The preclinical and clinical applications of 211At-labeled radiopharmaceuticals, including small molecules, peptides, and antibodies, are also discussed. Looking forward, the identification of new molecular targets, the optimization of 211At production and quality control methods, and the continued evaluation of 211At-labeled radiopharmaceuticals in preclinical and clinical settings will be the key to realizing the full potential of 211At-based targeted alpha therapy. With the growing interest and investment in this field, 211At-labeled radiopharmaceuticals are poised to play an increasingly important role in future cancer treatment.

Competing electrophilic substitution and oxidative polymerization of arylamines with selenium dioxide.

This article describes the detailed analysis of the reaction between arylamines, such as aniline, o-anisidine, and methyl anthranilate, with selenium dioxide in acetonitrile. A systematic analysis of the reaction products with the help of 77Se NMR and single-crystal X-ray crystallography revealed that the reaction progress follows three major reaction pathways, electrophilic selenation, oxidative polymerization, and solvent oxidation. For aniline and o-anisidine, predominant oxidative polymerization occurred, leading to the formation of the respective polyaniline polymers as major products. For methyl anthranilate, the oxidative polymerization was suppressed due to the delocalization of amine lone pair electrons over the adjacent carboxylate function, which prompted the selenation pathway, leading to the formation of two of the isomeric diorganyl selenides of methyl anthranilate. The diaryl selenides were structurally characterized using single-crystal X-ray diffraction. Density functional theory calculations suggest that the highest occupied molecular orbital of methyl anthranilate was deeply buried, which suppressed the oxidative polymerization pathway. Due to solvent oxidation, oxamide formation was also noticed to a considerable extent. This study provides that utmost care must be exercised while using SeO2 as an electrophile source in aromatic electrophilic substitution reactions.

Overlooked formation of chlorinated coupling byproducts during phenol degradation with ferrate(VI) oxidation technology

Currently, ferrate(VI) oxidation technology (FOT) has been regarded as one of the most promising options for the degradation of emerging organic pollutants. However, the role and transformation of chloride ions (Cl−) in FOT have not been well explored. The current study aims to investigate the formation of chlorinated phenolic byproducts upon ferrate(VI) oxidation processes. The obtained results indicate that chlorides suffering ferrate(VI) attack will be transformed to active chlorine species (ACS), which will subsequently lead to the formation of highly toxic aromatic chlorinated byproducts. The identified byproducts include common chlorinated phenolic derivatives, as well as complex chlorinated oligomer byproducts with ether structures (mainly dimers and trimers). While the formation of common chlorophenols can be ascribed to the electrophilic substitution reactions mediated by ACS, the oligomer byproducts are generated via coupling reactions between chlorinated phenoxy radicals. ECOSAR software predicts that the generated chlorinated oligomer byproducts exhibit high ecotoxicological effects. As a whole, the above findings shed light on the potential risk of FOT in real practice.

Photophysical and antitubercular studies on newly synthesised structurally architectured sulphonamide

This study presents the synthesis and characterisation of four mono-azo sulphonamide derivatives through diazo-coupling electrophilic substitution reactions. The structural analysis of the synthesised molecules was conducted utilising FT-IR, 1H-NMR and HR-MS techniques. Absorption and fluorescence maxima of the synthesised molecules were determined across solvents of varying polarity to explore Solvatochromic behaviour. Density functional theory was employed to elucidate electronic and optical properties, including the computation of HOMO–LUMO energies using Gaussian 09W software, with comparisons to experimental data. Molecular electrostatic potential 3D plots identified electrophilic and nucleophilic sites. Solvent interactions were evaluated using Kamlet–Abboud Taft and Catalan parameters. Further, global chemical reactivity descriptors were estimated to ascertain chemical reactivity of the molecules. Additionally, the effectiveness of the colourant anti-tubercular activity was evaluated using in vitro and molecular docking techniques. The biological activity results reveal that methyl-pyridone and barbituric acid coupled with sulphamethizole (SMP and SMB) displayed excellent anti-tubercular activity compared with the standard Gentamycin.

Two-Step Synthesis of 4-Hydroxy-3,5-dimethylphenyl Benzoate: Undergraduate Organic Laboratory of Electrophilic Aromatic Substitution and Nucleophilic Aromatic Substitution

Two-Step Synthesis of 4-Hydroxy-3,5-dimethylphenyl Benzoate: Undergraduate Organic Laboratory of Electrophilic Aromatic Substitution and Nucleophilic Aromatic Substitution

Electrochemical C-H Mono-/Multi-Bromination Regulation of N-Sulfonylanilines on a Cost-Effective Carbon Fiber Electrode and Its Prospective Electroactive Molecule Screening.

Electrochemical C-H mono/multi-bromination regulation of N-sulfonylanilines on the cost-effective CF electrode is described. This reaction proceeds smoothly under mild conditions with a broad substrate scope, affording diverse mono/multi-brominated anilines in moderate to good yields. Mechanism study reveals that this transformation involves anodic oxidation, aromatic electrophilic substitution, and deprotonation. Preliminary electroactive molecule screening results in its prospective application in electroactive MBs for electrochemical biosensors.