Electrode Materials For Supercapacitors Research Articles

Composition-optimized NiGa-LDH on MOF-derived and cobalt-nanoparticles-embedded carbon flakes for enhanced potassium-ion storage

Layered double hydroxides (LDHs), renowned for their distinct nanostructures, efficient ion channels, and high specific capacitance, are promising electrode materials for supercapacitors (SCs). However, commercial applications remain limited due to constraints in the rate capabilities and cycling. The synergistic effects of the composites can be leveraged by pairing LDHs with carbon materials to enhance the conductivity for better SC characteristics. Herein, flaky Zeolitic Imidazolate Framework(ZIF)-67 is deposited on carbon cloth and calcined to produce the MOF-derived composite of carbon nanosheet-embedded nano-cobalt particles (CPEC) on the surface of the carbon cloth. Afterward, NiGa-LDH with a controllable Ni to Ga ratio is synthesized on the CPEC to form a flower-like hierarchical nanostructure NiGa-LDH/CPEC@CC. Co nanoparticles act as nucleation sites for cohesive formation within the carbon cloth framework. Ni2Ga1-LDH/CPEC@CC has the best properties, such as a specific capacitance of 729.6F g−1 at 1 mA cm−2 and 97.3 % capacitance retention at 2 mA cm−2. The asymmetric supercapacitor (ASC) consisting of Ni2Ga1-LDH/CPEC@CC//AC has an excellent energy density of 83.96 Wh kg−1 with a power density of 80 W kg−1. Density-functional theory (DFT) calculations of Ni2Ga1-LDH/CPEC@CC affirm a potassium ion adsorption energy of −2.127 eV and density of state (DOS) near the Fermi level. The study imparts theoretical and technical knowledge about the design of complex nanostructures from MOF precursors.

Synthesis and Characterization of Synergetic Pd/MoO3–rGO Hybrid Material as Efficient Electrode for Supercapacitor Application

In this work, study synthesized Pd–rGO and Pd/MoO3–rGO nanocomposites via a one-pot hydrothermal method, serving as efficient electrodes for supercapacitor applications. Various analytical techniques, including XRD, XPS, HRTEM, BET, and Raman spectroscopy, were employed to characterize the structural, morphological, and physiochemical properties to assess the electrochemical supercapacitor performance of nanocomposite materials. The analyses confirmed that the charge transfer mechanism between the MoO3-NR with Pd-rGO in Pd/MoO3–rGO samples has significantly improved the electrochemical performance of Pd/MoO3–rGO by 2.7 times compared to Pd-rGO sample (105.00 F/g at 0.5 A/g). Remarkably, the Pd/MoO3–rGO hybrid material exhibited excellent electrochemical activity, boosting a specific capacitance of 291.50 F/g at a current density of 0.5 A/g, accompanied by energy density and power density values of 18.06 Wh/kg and 250.00 W/kg, respectively. Furthermore, it demonstrated noteworthy stability over prolonged usage, retaining 88.46% of its capacity after 1,000 cycles at a constant current density of 1.0 A/g. These findings underscore the promising potential of the Pd/MoO3–rGO nanocomposite as a highly effective electrode material for supercapacitors.

Activated biomass-derived 3-dimensional porous graphene-like carbon for high-performance energy storage electrode materials

This article reports studies on the fabrication of active material for supercapacitor electrodes, from 3D porous graphene-like carbon (GLC), synthesized by carbonization from coffee waste (CW) and tea waste (TW) at 550 °C, followed by thermochemical activation in KOH at 850 °C in a quartz tubular furnace. The microstructure of coffee and tea waste shows the form of micro- and mesopores during carbonization and further chemical activation forms hierarchically highly porous 3D graphene-like carbon. GLC-CW exhibited a higher specific surface area (SSA) of 3486 m2/g according to the Brunauer-Emmett-Teller (BET) method, compared to GLC-TW, which had an SSA of 2407 m2/g. These results highlight the effectiveness of graphene-like carbon derived from coffee and tea waste, demonstrating its potential as a promising material for high-capacity supercapacitors. The electrochemical characteristics of the assembled supercapacitors using GLC-CW and GLC-TW revealed significantly higher specific capacitance values of 214 F/g and 182 F/g respectively, along with cycling stability of 98 % and 95 % during 5000 cycles of charge and discharge at 2 A/g current density. This approach can produce high-performance electrode materials for supercapacitors at a reasonable cost and with easy scalability.

Zeolitic imidazolate framework@graphene oxide nanocomposites for efficient supercapacitor electrodes

Despite advancements in nanoscale electrode materials, the pursuit of dependable, effective, and environmentally sound supercapacitors continues. This study explores the potential of zeolitic imidazolate framework@graphene oxide (ZIF@GO) nanocomposites as a viable option by revealing their improved electrochemical performance, including enhanced charge storage capacity and prolonged cycling stability. The ZIF-8@GO electrode exhibited an exceptional specific capacitance of 1372.67F/g at 1 A/g, indicating remarkable energy storage capacity. Furthermore, it showed exceptional cycling stability and durability by maintaining 96.02% of its capacitance after 20,000 cycles. To further evaluate ZIF-8@GO for energy storage, an asymmetric supercapacitor was assembled using the engineered electrode and activated carbon as the cathode and anode, respectively. The ZIF-8@GO nanostructure device demonstrated outstanding energy storage capability, maintaining a high specific capacitance of 165.29F/g at 1 A/g. Additionally, the device exhibited remarkable stability and endurance after 20,000 cycles, retaining 87.47% of its initial value. The promising electrochemical performance and ability of ZIF-8@GO nanocomposite to maintain capacitance across multiple cycles suggest a potential for advanced supercapacitor electrode materials.

N-doped hierarchically porous carbon from lignite-derived residue for high-performance supercapacitor

Lignite-derived residue with cross-linked aromatic structure and heteroatom groups is an alternative and low-cost precursor for porous carbon. Herein, N-doped hierarchically porous carbon (NDHPC) was prepared by KOH activation from lignite-derived residue using ZnO as the template and dicyandiamide as the nitrogen source. The optimal NDHPC presents hierarchically porous stacked layered structure with high specific surface area (2648.18 m2/g) and contains abundant O/N functional groups, making it promising candidate as the electrode material. Introducing nitrogen can provide more pseudocapacitors and meanwhile improve the wettability of the NDHPC, thus enhancing electrochemical performance. The optimal NDHPC exhibits a high specific capacitance of 336 F g−1 at the current density of 0.5 A g−1 with good rate performance. Additionally, the assembled NDHPC symmetrical supercapacitor presents outstanding cycle stability with 96.2 % capacitance retention and possesses energy density of 7.85 Wh kg−1 at power density of 250 W kg−1. This study offers an effective and low-cost approach to fully utilize the organic matter in coal-derived residue for preparing supercapacitor electrode materials.

Honeycomb-like N, S dual-doped porous carbons derived from pomelo peel by effective exogenous doping strategy for supercapacitor electrodes

Biomass has emerged as a pivotal precursor to synthesize supercapacitor electrode materials owing to its low-cost and plentiful resources. The optimization of heteroatoms and porous structures is believed to be a viable method to enhance the electrochemical properties of biomass-generated carbons. Herein, pomelo peel as a precursor using KOH as an activator and heteroatom dopants (urea and sodium sulfide) was successfully converted into N, S dual-doped porous carbons under the high temperature. The effective exogenous doping strategy realizes a high abundance of N/S heteroatoms, and KOH chemical activation promotes the development of nanopores and interconnected porosities. The resultant carbon CNS-800 with a high specific surface area of 1823.8 m2 g−1 and rich heteroatoms of N (2.51 wt%) and S (1.36 wt%) anticipately exhibits the outstanding electrochemical properties, including the excellent specific capacitance of 329.2 F g−1 at 1 A g−1 in a three-electrode (3E) system and the superb capacitance retention rate of 74.12 %. The fabricated CNS-800-based symmetric two-electrode (2E) supercapacitor demonstrates a good capacitance of 243.7 F g−1 and excellent cycling stability, as well as a superb energy density of 14.3 Wh kg−1. This work provides a compelling and cost-effective approach to transform biomass waste like pomelo peels into high-performance electrodes for supercapacitors.

Synthesis and surface engineering of carbon-modified cobalt ferrite for advanced supercapacitor electrode materials

The precise design and surface modification of electrode materials are crucial challenges for advancing the supercapacitor technology. In this study, we report a straightforward two-step process for the synthesis of a cobalt ferrite (CoFe2O4)/carbon hetero nanostructure. The CoFe2O4 nanoparticles were first synthesized using a simple chemical oxidation method, followed by carbon modification using glucose. The modified samples were calcined at 400 and 600 °C for 4 h in N2 atmosphere to optimize the structural and electrochemical properties.. The increase in the grain size of carbon modified cobalt ferrite magnetic nanoparticles (MNPs) was observed from 22 to 28 nm with post annealing temperature. The presence of carbon was confirmed by the FTIR spectroscopy, FESEM and TEM analyses. The carbon decoration on the cobalt ferrite partially showed a core–shell like morphology. The saturation magnetization of bare cobalt ferrite was observed to be 76 emu/g and the same was decreased by the surface modification with carbon. A high specific capacitance of 323 F/g was observed for the carbon-modified cobalt ferrite MNPs annealed at 600 °C. The electrochemical impedance spectroscopy (EIS) analysis demonstrated that the charge-transfer resistance (Rct) decreased significantly in the carbon-modified CoFe2O4 MNPs, particularly for the sample annealed at 600 °C, with an Rct value of 17 Ω. The carbon layer effectively enhanced conductivity and reduced the electrode/electrolyte interface, led to the improved electrochemical performance, as reflected in the enhanced specific capacitance. An improved capacitance retention of 84 % was achieved in the case of carbon-modified cobalt ferrite MNPs based electrode even after 4000 cycles. The study suggested that the prepared carbon-modified cobalt ferrite MNPs stand in the limelight as a better candidate electrode material for the electrochemical applications.

Synthesis and characterization of MoS2-carbon based materials for enhanced energy storage applications

The article delves into the synthesis and characterization of MoS2-carbon-based materials, holding promise for applications in supercapacitors and ion batteries. The synthesis process entails the preparation of MoS2 and its carbon hybrids through exfoliation, hydrothermal treatment, and subsequent pyrolysis. Various analytical techniques were employed to comprehensively examine the structural, compositional, and morphological properties of the resulting materials. The article explores the electrochemical performance of these electrode materials in supercapacitors and ion batteries (LiB, SiB, KiB). Electrochemical measurements were conducted in aqueous electrolyte for supercapacitors and various aprotic electrolytes for ion batteries. Results highlight the impact of the synthesis process on electrochemical performance, emphasizing factors such as capacitance, rate capability, and charge/discharge cycle performance. Hydrothermally treated MoS2-carbon exhibited a specific capacitance of approximately 150 F g-1 in supercapacitors, attributed to its high surface area and efficient charge storage mechanisms. Additionally, for Li-ion battery materials without hydrothermal treatment showed impressive capacity retention of around 88% after 500 charge-discharge cycles, starting with an initial specific capacity of about 920 mAh/g. Long-term stability was demonstrated in both supercapacitors and lithium-ion batteries, with minimal capacitance degradation even after extensive charge-discharge cycles. This research underscores the potential of MoS2-based materials as effective energy storage solutions.

High-performance supercapacitor of ZnO-incorporated structurally modified g-C3N4 with circular mesoporous channels attained via a template-free approach

Abstract Here, the superior structural features of graphitic carbon nitride (g-C3N4) in combination with integrated mesoporous channels have been explored for its use as a supercapacitor electrode material. A facile template-free strategy is adopted for the preparation of ZnO-incorporated modified g-C3N4 nanocomposite, where material characterization via x-ray difraction, Fourier transfrom infrared spectroscopy, field-emission scanning electron microscopy, transmission electron microscopy and x-ray photoelectron spectroscopy analysis revealed the presence of structurally modified g-C3N4 having uniform circular mesoporous channels with well-dispersed ZnO with strong Zn–C and Zn–N interactions. The electrical double-layer capacitance together with the pseudocapacitance of the ZnO/g-C3N4 electrode material resulted in improved performance, leading to a specific capacitance of 146.3 F g−1 at a current density of 0.5 A g−1; an increased capacitance is observed in 5000 repeated charge–discharge cycles. A symmetric coin cell supercapacitor fabricated from the material displayed an energy density of 38.8 mWh kg−1 at a power density of 4259 mW kg−1. Additionally, the long life of 6000 cycles (retaining 100% specific capacitance) exhibited by the coin cell supercapacitor further indicates the promising energy storage nature of the ZnO-incorporated modified g-C3N4 mesoporous nanoarchitecture. Real life application of the ZnO/g-C3N4-derived supercapacitor is illustrated by lighting up a green LED with a series connection of four coin cells.

Efficient production of activated carbons from PET for organic supercapacitor applications: A single-step approach

This study introduces a novel approach for synthesizing supercapacitor electrode materials using polyethylene terephthalate (PET), a plastic facing recycling challenges. Unlike conventional methods that involve separate carbonization and activation steps, we employ a single-step method. In this process, activated carbons are synthesized using potassium hydroxide (KOH) as an activating agent. Remarkably, the yield via the single-step method (S_PACXs) exceeds that of the two-step method (T_PACYs) by at least 1.7 times. During the single-step process, KOH forms a layer on the PET surface before activation, which leads to increased yields, higher specific surface areas, and more developed mesopores. Furthermore, S_PACXs exhibit superior specific surface areas compared to commercial activated carbon. These enhanced properties significantly improve electrochemical performance, with S_PACXs demonstrating superior performance compared to T_PACYs. Ultimately, this study validates the efficiency of the single-step method in producing high-quality activated carbon from PET, saving time and energy, and outperforming the two-step method.

A Flexible Asymmetric Supercapacitor with High-Performance and Long-Lifetime: Fabrication of Nanoworm-Like-Structured Electrodes Based on Polypyrrole-Thiosemicarbazone Complex.

A thiosemicarbazone-based iron(III) complex is prepared and used in the preparation of a supercapacitor electrode material. This electrode is produced by a solvothermal reaction of polypyrrole and the complex on carbon felt. The characterization of the complex and material is carried out using UV-vis, elemental analysis, FT-IR, XRD, BET, and TGA methods, and the surface morphology is examined using SEM technique. Because the interaction of electrode and electrolyte is of great importance in energy storage systems, as the surface area and pore volume increase, electrode ions at the electrode/electrolyte interface leak to the inner surfaces and interact with the larger surface area, which increases the charge storage performance. The electrode material, nano-worm structure, reached the highest specific capacitance value of 764.6 F g-1 at 5 mV s-1. Compared to the capacitance value of polypyrrole in its pure form, it is observed to exhibit an 187.2% increase. The highest specific capacitance value of the asymmetric supercapacitor (ASC) formed with a graphite electrode is 318.1 F g-1 at the current density of 1 Ag-1. Moreover, ASC reached a wide working potential of 1.8 V in an aqueous electrolyte and exhibited ultra-long cycle life (112%), maintaining its stability after 10000 cycles.

Polyoxometalate/α-Fe2O3/polyaniline composite: Tailored approaches for high-performance supercapacitors

The need for portable, high-performance electronics that have high power or energy density has increased significantly in recent years. In this work, a composite material was coated on stainless steel that consists of polyoxometalate (POM)/α-Fe2O3/polyaniline (PANI) as an electrode material for a symmetric supercapacitor. α-Fe2O3 was prepared using starch as a template while PANI was electrodeposited. The physical and chemical characteristics of the modified electrodes were investigated via Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and electrochemical techniques such as cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic chargedischarge (GCD) experiments. In 1 M H2SO4, the composite had a specific capacitance of 528 F/g at a current density of 0.2 A/g. In addition, the composite exhibited a high energy density of 73.4 Wh kg−1 at a high-power density of 7.14 kW kg−1 and 91.62 % capacity retention after 10 cycles. The results show that POM/α-Fe2O3/PANI is a promising composite electrode for use as a supercapacitor electrode material.

Sustainable supercapacitors of sulfur-doped carbon from environmentally friendly sodium lignosulfonate impregnated with bacterial cellulose

The use of sustainable natural sources to fabricate porous carbon materials has garnered significant interest in energy storage. This study proposes a method for synthesizing sulfur-doped porous carbon (S‑carbon) materials via the carbonization of bacterial cellulose (BC) impregnated with sodium lignosulfonate (LS), which functions as a renewable source of both carbon and sulfur, eliminating the need for external activation processes. The carbonization process yielded S‑carbon with a notable sulfur content of 1.4 % and a high specific surface area of 650 m2/g. Transmission electron microscopy (TEM) images reveal fibrous carbon structures with mesopores and micropores in the S‑carbon material. Electrochemically, S‑carbon exhibited an impressive specific capacitance of 272.6 F g−1 at a current density of 1 A/g and demonstrated outstanding cycling stability, retaining 86 % of its capacitance after 5000 cycles at a current density of 6 A/g in a 3 M KOH electrolyte. The development of sulfur-doped fibrous carbon from BC-LS offers promising potential as a sustainable electrode material for supercapacitors.

Synthesis of Porous Carbons from Candlenut Shells Using Various Types of Activators for Environmentally Friendly Supercapacitors

Porous carbon is one of the promising electrode materials for supercapacitors due to its unique and engineerable microstructural properties. The study of the synthesis of porous carbon from waste biomass is very important due to the abundance of natural resources, low cost production and contribute to solving environmental problems. In this study, porous carbons derived from candlnut shell with various type of activator was studied the chemical structural, morphological and electrochemical properties then evaluated as electrodes for supercapacitor. We have been successfully synthesized of porous carbon from candlenut shells using three steps of the process, i.e.: carboni-zation, activation and calcination. Carbonization was carried out at 700°C in a furnace using a closed crucible to minimize the oxygen. The chemical activation conducted using three types of activators, i.e. ZnCl2, H3PO4 and KOH then calcination process by heated at 800°C for 1 h under Ar flow. The results of the Fourier-transform infrared (FTIR) analysis show that the carbonization process increases the content of aromatic C=C functional groups and reduce the OH, C-H, C-O and C=O functional groups. The carbonization process has also increased the electrical conductivity of the sample around 0.8525 S/m. The results of Scanning Electron Microscope (SEM) images can be observed that the activation process of carbon has formed which was indicated by the appearance of many pores on the surface area of carbon. N2 adsorption/desorption isotherms (Brunauer–Emmett–Teller (BET)) characterization was indicated that the porous carbon is dominated by mesoporous with a pore size around 2-50 nm. BET characterization also can be determined the surface area of porous carbon around 477 m2/g for ZnCl2, 636 m2/g for H3PO4, and 681 m2/g for KOH. This synthesized materials are further employed in a symmetric supercapacitor using simple glass cell. The best performance of supercapacitor achieved by KOH porous carbons with 16.30 F/g of specific capacitance, 2.26 Wh/kg of energy density and 1038 W/kg of power density.

Constructing Co3O4 Nanowire@NiCo2O4 Nanosheet Hierarchical Array as Electrode Material for High-Performance Supercapacitor.

The Co3O4 nanowire@NiCo2O4 nanosheet hierarchical array was constructed on Ni foam using hydrothermal and annealing approaches in turn, from which a NiCo2O4 nanosheet could self-assemble on the Co3O4 nanowire. The structure and morphology of the Co3O4 nanowire@NiCo2O4 nanosheet hierarchical array were characterized via XRD, EDS, SEM, and FESEM, respectively. The electrochemical performance of the composite array was measured via a cyclic voltammetry curve, galvanostatic current charge-discharge, charge-discharge cycle, and electrochemical impedance and then compared with the Co3O4 nanowire. The results show that the Co3O4 nanowire@NiCo2O4 nanosheet hierarchical array could reach a high value of 2034 F g-1 at a current density of 2.5 A g-1. After 5000 galvanostatic charge-discharge cycles, the specific capacitance of the Co3O4 nanowire@NiCo2O4 nanosheet hierarchical array could still maintain 94.7% of the original value. Therefore, the Co3O4 nanowire@NiCo2O4 nanosheet hierarchical array would be a desirable electrode material for a high-performance supercapacitor.

Anode Glow Discharge Electrolysis Synthesis of Flower-Like α-MnO2 Nanospheres: Structure, Formation Mechanism, and Supercapacitor Performance.

A novel green synthesis strategy-anode glow discharge electrolysis (AGDE) was employed for one-step preparation of α-MnO2 in 2 g L-1 KMnO4 solution, in which Pt needle and carbon rod were regarded as anode and cathode, respectively. The optimal preparation condition is 400 V for 60 min and the power consumption is below 45 W. The XRD, Raman spectra, XPS and EPR proved that α-MnO2 with structural defects (oxygen vacancies) is obtained. SEM and TEM revealed that α-MnO2 shows a flower-like nanospheres with a diameter of 165 nm, which is assembled by many nanosheets. A possible formation mechanism is that the MnO2 is generated via the reduction of MnO4 - by H⋅ and eaq - in plasma-liquid interface. Electrochemical test found that MnO2 nanospheres exhibit a specific capacitance of 365 F g-1 at 1 A g-1, and capacity retention of 79.8 % after 10,000 cycles at 5 A g-1. The assembled asymmetric supercapacitor shows the maximum energy density of 23.1 Wh kg-1 at power density of 1.89 kW kg-1. In brief, AGDE is a simple, facile and green technique for the synthesis of α-MnO2 without adding extra chemicals, and prepared α-MnO2 can be considered as an excellent candidate of electrode materials for supercapacitor.

A wearable cotton fiber-based supercapacitor electrode material with outstanding stability and photothermal performance utilizing AgNWs, NiCoAl-LDH, and PPy-NWs

Designing cotton fiber (CF) based flexible electrode materials with both electrochemical energy storage and structural stability is crucial for the utilization of flexible supercapacitors in wearable devices. Nevertheless, the electrochemical properties of such materials are often constrained by suboptimal ion diffusion, a limited electroactive surface area, and inadequate structural integrity. Herein, Silver nanowires (AgNWs), NiCoAl hydrotalcite (NCA-LDH), and polypyrrole nanowires (PPy-NWs) are employed to construct a CF-based electrode material (PNHAS/CF) with high stability through a layer-by-layer self-assembly method. The PNHAS/CF with a high capacitance of 1207.58 mF cm−2 at 5 mA cm−2 due to the faster electronic transmission paths of AgNWs and PPy-NWs, and the high specific capacitance of NCA-LDHs. The NCA-LDH stabilizes the PPy-NWs molecular chain, and the PPy-NWs winding structure can further enhance the PNHAS/CF's structural stability and prevent the AgNWs network from being destroyed, which guarantees the exceptional 87.5 % capacitance retention after 2000 cycles. The constructed symmetrical supercapacitor shows an energy density of 36.28 μWh cm−2 at 0.31 mW cm−2 power density. The PNHAS/CF exhibits superb solar spectral absorptivity (~94.8 %) and outstanding solar heating performance. Surprisingly, the fiber-based flexible electrode material and the assembled supercapacitor are expected to find applications in wearable intelligent electronics.

Tuning Supercapacitive Behavior of Eri Silk (Philosamiaricini)‐Polyanilne Nanocomposite for Electrodes Applications

ABSTRACTHerein, the synthesis of Polyaniline‐Eri nanosilk fibroin (PANI/ENSF) composite supercapacitor electrode material by utilizing Eri silk (Philosamiaricini) as a raw material and polyaniline (PANI) with H2SO4 as doping acid and (NH4)2S2O8 as an oxidant, via a simple in situ oxidative polymerization technique, with good performance characteristics is reported. The chemical composition of the composites have been studied by using XRD, FT‐IR, UV–vis spectroscopy, Raman spectroscopy, and morphology is studied by SEM. BET analysis reveals that the surface area of composite is 712.10 m2g−1, and BJH analysis shows that the pore size is mainly concentrated between 1.5 and 15.7 nm. The composite shows electrical conductivity of 17.33 × 10−2 Scm−1 (Keithley Model 2000). The electrochemical performances are evaluated by using CV, GCD, and EIS measurements. The three‐electrode system composite shows specific capacitance of about 310.12 Fg−1 at 0.1 Ag−1, which is the highest value being reported, compared to already available polyaniline‐silk composites. Further the studies have been extended to assemble a symmetrical two‐electrode supercapacitor device which also exhibits a high value of specific capacitance of 35 Fg−1 at 5 Ag−1 and 96.12% capacity retention over 5000 cycles. For the first time, this study reports using a Polyaniline‐Eri nanosilk composite to design an efficient supercapacitor electrode.

Schiff base polymer doped with MWCNTs as electrode material for supercapacitors

Schiff base polymer doped with MWCNTs as electrode material for supercapacitors

A review on progress and prospects of diatomaceous earth as a bio-template material for electrochemical energy storage: synthesis, characterization, and applications

AbstractThis comprehensive review explores the remarkable progress and prospects of diatomaceous earth (DE) as a bio-template material for synthesizing electrode materials tailored explicitly for supercapacitor and battery applications. The unique structures within DE, including its mesoporous nature and high surface area, have positioned it as a pivotal material in energy storage. The mesoporous framework of DE, often defined by pores with diameters between 2 and 50 nm, provides a substantial surface area, a fundamental element for charge storage, and transfer in electrochemical energy conversion and storage. Its bio-templating capabilities have ushered in the creation of highly efficient electrode materials. Moreover, the role of DE in enhancing ion accessibility has made it an excellent choice for high-power applications. As we gaze toward the future, the prospects of DE as a bio-template material for supercapacitor and battery electrode material appear exceptionally promising. Customized material synthesis, scalability challenges, multidisciplinary collaborations, and sustainable initiatives are emerging as key areas of interest. The natural abundance and eco-friendly attributes of DE align with the growing emphasis on sustainability in energy solutions, and its contribution to electrode material synthesis for supercapacitors and batteries presents an exciting avenue to evolve energy storage technologies. Its intricate structures and bio-templating capabilities offer a compelling path for advancing sustainable, high-performance energy storage solutions, marking a significant step toward a greener and more efficient future. Graphical Abstract