Electrochemiluminescence Imaging Research Articles

Extended Spherical Diffusion Theory: Electrochemiluminescence Imaging Analysis of Diffusive Molecules from Spherical Biosamples.

Spherical biosamples such as immunobeads, cells, and cell aggregates have been widely used in bioapplications. The bioactivity of individual spherical biosamples in highly sensitive assays and individual analyses must be evaluated in a high-throughput manner. Electrochemiluminescence (ECL) imaging was recently proposed for the high-throughput analysis of diffusive molecules from spherical biosamples. ECL imaging involves the placing of spherical biosamples on a flat electrode filled with a solution. The biosamples produce (or consume) biological/chemical molecules such as H2O2 and O2, which diffuse to form a concentration gradient at the electrode. The ECL signals from the molecules are then measured to obtain the concentration profile, which allows the flux to be estimated, from which their bioactivities can be successfully calculated. However, no studies on theoretical approaches for spherical biosamples on flat surfaces have been conducted using ECL imaging. Therefore, this paper presents a novel spherical diffusion theory for spherical biosamples on a flat surface, which is based on the common spherical diffusion theory and was designated as the extended spherical diffusion theory. First, the concepts behind this theory are discussed. The theory is then validated by comparison with a simulated analysis. The resulting equation successfully expresses the concentration profile for the entire area. The glucose oxidase activity in the hydrogel beads is subsequently visualized using ECL imaging, and the enzymatic product flux is calculated using the proof-of-concept theory. Finally, a time-dependent simulation is conducted to fill the gap between the theoretical and experimental data. This paper presents novel guidelines for this analysis.

NiFe Nanoalloy Electrocatalyst as a Coreaction Accelerator for Enhancing Biomarker Electrochemiluminescence Imaging Detection.

The development of coreaction accelerators with excellent performance is crucial for improving electrochemiluminescence (ECL) performance. In this study, a NiFe nanoalloy electrocatalyst (NiFe-NAEC) was used as a coreaction accelerator to promote persulfate activation, resulting in a 44-fold increase in the ECL intensity of flower-like Zn-3,4,9,10-perylenetetracarboxylate (FL-Zn-PTC). Moreover, the synergistic combination of NiFe-NAEC and silver nanoparticles led to a 134-fold increase in the ECL intensity of FL-Zn-PTC, with a 6275% improvement in the ECL efficiency compared with a reference system containing Ru-bpy/K2S2O8. Consequently, a sensor was constructed for the visual detection of amino-terminal pro-brain natriuretic peptide. This sensor exhibited high sensitivity and provided intuitive results within a linear range from 0.01 to 1000 pg/mL, with a detection limit of 2.1 fg/mL. Overall, this study presents a strategy that integrates an electrocatalytic coreaction accelerator with synergistic enhancement to improve ECL performance. This approach has the potential to expand the range of emitter materials and advance ECL technology.

Self-Enhanced Electrochemiluminesence of Dye-Doped Polymer Dots for Coreactant-Free Visualized Detection of Iodide Ions.

The monitoring of radioactive iodide levels is of great significance in environmental science and cancer radiotherapy. In this work, a high-throughput, radiation-resistant, and visualized electrochemiluminescence (ECL) strategy was developed for detection of iodide ions. Herein, the hydrophobic ruthenium derivative (Ru(bpy)3[B(C6F5)4]2) (bpy = bipyridyl) was doped in tertiary amine-coupled polymer dots (N-PFO Pdots) to synthesize self-enhanced Pdots (Ru@Pdots), which showed extremely high ECL intensity in absence of coreactant. Due to the efficient ECL resonance energy transfer between Ru(bpy)3[B(C6F5)4]2 and N-PFO, the Ru@Pdots exhibited 18 times higher ECL intensity compared with bare N-PFO Pdots. Besides, Ru@Pdots also showed 220-times higher ECL intensity compared with Ru(bpy)3[B(C6F5)4]2 doped coreactant-dependent Pdots (Ru@PFO Pdots). Using Ru@Pdots as ECL emitters, an ECL imaging array was designed for iodide ion detection, which exhibited a detection range of 0.8 nM-4 μM and a limit of detection of 0.1 nM. In this strategy, iodide ions were oxidized as iodide free radicals on the surface of the electrode, which could further consume the nitrogen radical of Ru@Pdots and effectively quench the ECL signal. This method also showed good specificity, radiation-resistant performance, and accuracy in actual seawater sample testing, which indicated its value in marine environmental monitoring, nuclear security, and cancer radiotherapy.

Electrochemiluminescence in Microfluidic Channels: Influence of Mass Transport on the Tris(2,2'-bipyridyl)ruthenium(II)/Tripropylamine System at Semitransparent Electrodes.

Mass transport in laminar flow can improve the electrochemiluminescence (ECL) performance at the microchannel electrodes, depending on the device geometry and operating regimes. The known Ru(bpy)32+/tripropylamine (TPA) system was selected and studied in continuous microfluidics on semitransparent platinum electrodes. With this electrode material, ECL is mainly generated via a catalytic pathway. This mechanism was characterized under flow conditions by monitoring the ECL emission using linear sweep voltammetry and chronoamperometry. In parallel, ECL imaging of the electrode surface was conducted in order to characterize the ECL profiles above the electrode in the flow direction. Numerical simulations were carried out and then compared to experimental data to both confirm the ECL mechanism and assess the main kinetic parameters. A good agreement was obtained, demonstrating the influence of the operating regimes of the microchannel electrodes on the ECL performances. In the thin-layer regime, due to TPA depletion, ECL is located at the upstream edge of the electrode, while it is homogeneously distributed over the electrode surface in convective regimes. These characteristics will necessarily have to be taken into account in the design of dedicated ECL analytical microfluidic devices operating under continuous flow.

Deep Learning-Assisted Smartphone-Based Electrochemiluminescence Visual Monitoring Biosensor: A Fully Integrated Portable Platform.

A novel, portable deep learning-assisted smartphone-based electrochemiluminescence (ECL) cost-effective (~10$) sensing platform was developed and used for selective detection of lactate. Low-cost, fast prototyping screen printing and wax printing methods with paper-based substrate were used to fabricate miniaturized single-pair electrode ECL platforms. The lab-made 3D-printed portable black box served as a reaction chamber. This portable platform was integrated with a smartphone and a buck-boost converter, eliminating the need for expensive CCD cameras, photomultiplier tubes, and bulky power supplies. This advancement makes this platform ideal for point-of-care testing applications. Foremost, the integration of a deep learning approach served to enhance not just the accuracy of the ECL sensors, but also to expedite the diagnostic procedure. The deep learning models were trained (3600 ECL images) and tested (900 ECL images) using ECL images obtained from experimentation. Herein, for user convenience, an Android application with a graphical user interface was developed. This app performs several tasks, which include capturing real-time images, cropping them, and predicting the concentration of required bioanalytes through deep learning. The device's capability to work in a real environment was tested by performing lactate sensing. The fabricated ECL device shows a good liner range (from 50 µM to 2000 µM) with an acceptable limit of detection value of 5.14 µM. Finally, various rigorous analyses, including stability, reproducibility, and unknown sample analysis, were conducted to check device durability and stability. Therefore, the developed platform becomes versatile and applicable across various domains by harnessing deep learning as a cutting-edge technology and integrating it with a smartphone.

Zero-Background Dual-Mode Closed Bipolar Electrode Electrochemiluminescence Biosensor Based on ZnCoN-C Potential Regulation for Ultrasensitive Detection of Ochratoxin A.

In this work, the relationship between electrochemiluminescence (ECL) signal and driving voltage was first studied by self-made reduced and oxidized closed bipolar electrodes (CBPEs). It was found that when the driving voltage was large enough, the maximum ECL signals for the two kinds of CBPEs were the same but their required drive voltages were different. Zinc cobalt nitrogen doped carbon material (ZnCoN-C) had an outstanding electric double layer (EDL) property and conductivity. Therefore, it could significantly reduce the driving voltage of two kinds of CBPE systems, reaching the maximum ECL signal of Ru(bpy)32+. Interestingly, when the ZnCoN-C modified electrode reached the maximum ECL signal, the bare electrode signal was zero. As a proof-of-concept application, a zero-background dual-mode CBPE-ECL biosensor was constructed for the ultrasensitive detection of ochratoxin A (OTA) in beer. Considering that beer samples contained a large number of reducing substances, a reduced CBPE system was selected to build the biosensor. Furthermore, a convenient ECL imaging platform using a smartphone was built for the detection of OTA. This work used a unique EDL material ZnCoN-C to regulate the driving voltage of CBPE for the first time; thus, a novel zero-background ECL sensor was constructed. Further, this work provided a deeper understanding of the CBPE-ECL system and opened a new door for zero-background detection.

A visual biosensor chip based on the enhanced electrochemiluminescence with low triggered potential for ochratoxin A detection

The introduction of a coreaction accelerator can effectively enhance the electrochemiluminescence (ECL) response. However, the development of coreaction accelerators for ruthenium (Ru) complex, one of the most widely used ECL emitters, is still in its early stages. In this study, the application of BiOI as a multifunctional coreaction accelerator for the Ru/N-Butyldiethanolamine (DBAE) system for the first time. The BiOI microspheres not only exhibit a fivefold enhancement in ECL signal but also reduce the trigger potential, potentially mitigating interference factors associated with high applied voltage. The nanoflower structure of BiOI microspheres also facilitates the immobilization of Ru(bpy)32+. Building upon this, a portable visual biosensor chip was developed for the detection of ochratoxin A (OTA). The biosensor chip comprises a sensing cell and a reporting cell. When OTA toxins are detected in the microenvironment, the aptamers attached to the surface of the sensing cell are released, resulting in a decrease in impedance on the electrode surface. Consequently, the ECL emission from Ru(bpy)32+/BiOI microspheres modified onto the reporting cell is enhanced. The concentration of OTA can be determined by analyzing the intensity change of ECL imaging, eliminating the need for specific instruments. This visual ECL biosensor chip offers the advantages of portability, ease of operation, low cost, and demonstrates excellent performance in detecting beer samples.

An electrochemiluminescent imaging strategy based on CRISPR/Cas12a for ultrasensitive detection of nucleic acid

BackgroundPersistent infection with human papillomavirus (HPV) significantly contributes to the development of cervical cancer. Thus, it is urgent to develop rapid and accurate methods for HPV detection. Herein, we present an ultrasensitive CRISPR/Cas12a-based electrochemiluminescent (ECL) imaging technique for the detection of HPV-18 DNA. ResultThe ECL DNA sensor array is constructed by applying black hole quencher (BHQ) and polymer dots (Pdots) co-labeled hairpin DNA (hpDNA) onto a gold-coated indium tin oxide slide (Au-ITO). The ECL imaging method involves an incubation process of target HPV-18 with a mixture of crRNA and Cas12a to activate Cas12a, followed by an incubation of the active Cas12a with the ECL sensor. This interaction causes the indiscriminate cleavage of BHQ from Pdots by digesting hpDNA on the sensor surface, leading to the restoration of the ECL signal of Pdots. The ECL brightness readout demonstrates superior performance of the ECL imaging technique, with a linear detection range of 10 fM–500 pM and a limit-of-detection (LOD) of 5.3 fM. SignificanceThe Cas12a-based ECL imaging approach offers high sensitivity and a broad detection range, making it highly promising for nucleic acid detection applications.

Ultrasensitive Electrochemiluminescence Imaging Detection of Multiple miRNAs in Single Cells with a Closed Bipolar Electrode Array Chip.

In situ sensitive detection of multiple biomarkers in a single cell was highly necessary for understanding the pathogenesis mechanism and facilitating disease diagnosis. Herein, a bipolar electrode (BPE)-electrochemiluminescence (ECL) imaging chip was designed for ultrasensitive in situ detection of multiple miRNAs in single cells based on a dual-signal amplification strategy. A single cell was trapped and lysed within the microtrap of the cathode chamber and an HCR amplification process and nanoprobes (Fc/DNA/Fe3O4) were introduced, leading to a large number of electroactive molecules (Fc) being modified on the surface. Under a suitable potential, Fc+ in the cathodic chamber was reduced to Fc and L-012 was oxidized in the anodic chamber according to the electric neutrality principle of the bipolar electrode system, resulting in the ECL signal recorded by EMCCD. Ascribed to the dual-signal amplification, sensitive visual detection of miRNA-21 and miRNA-155 in single cells was achieved. For MCF-7 cells, miRNA-21 and miRNA-155 were calculated to be 4385 and 1932 copies/cell (median), respectively. For HeLa cells, miRNA-21 and miRNA-155 were calculated to be 1843 and 1012 copies/cell (median), respectively. The comprehensive evaluation of two kinds of miRNA could effectively eliminate error signals, and the detection precision was improved by 10%.

Bright luminol electrochemiluminescence mediated by a simple TEMPO radical for visualized multiplex detection

In this work, a series of 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO) radicals bearing different functional groups were exploited as a simple catalyst to promote electrochemiluminescence (ECL) generation in luminol/H2O2 system. These TEMPO radicals were found to facilitate the electrochemical oxidation of H2O2 and luminol through different catalytic mechanisms, as well as the subsequent ECL generation of luminol/H2O2 system. The electrochemical oxidation and luminol ECL generation could be tuned by the functional group on the para-position of TEMPO, for which the structure/activity relationship was revealed. Finally, with the combination of enzymatic system, luminol ECL enhancement up to 9.6-fold was obtained through the catalysis of 4-hydroxyl-TEMPO. The enhanced luminol ECL allows acquiring brighter ECL images in a single-electrochemical system (SEES) for multiplex detection of cholesterol, H2O2 and glucose.

Electrochemiluminescence Microscopy.

Electrochemiluminescence (ECL) is rapidly evolving from an analytical method into an optical microscopy. The orthogonality of the electrochemical trigger and the optical readout distinguishes it from classic microscopy and electrochemical techniques, owing to its near-zero background, remarkable sensitivity, and absence of photobleaching and phototoxicity. In this minireview, we summarize the recent advances in ECL imaging technology, emphasizing original configurations which enable the imaging of biological entities and the improvement of the analytical properties by increasing the complexity and multiplexing of bioassays. Additionally, mapping the (electro)chemical reactivity in space provides valuable information on nanomaterials and facilitates deciphering ECL mechanisms for improving their performances in diagnostics and (electro)catalysis. Finally, we highlight the recent achievements in imaging at the ultimate limits of single molecules, single photons or single chemical reactions, and the current challenges to translate the ECL imaging advances to other fields such as material science, catalysis and biology.

Electrochemiluminescence in Graphitic Carbon Nitride Decorated with Silver Nanoparticles for Dopamine Determination Using Machine Learning.

Electrochemiluminescence (ECL) luminophores with wavelength-tunable multicolor emissions are essential for multicolor ECL imaging detection and multiplexed analysis. In this work, silver nanoparticle (Ag NP)-decorated graphitic carbon nitride (g-CN@Ag) nanocomposites were synthesized. The morphology, chemical composition, structure, and ECL property of g-CN@Ag were investigated. The prepared g-CN, g-CN@Ag1, g-CN@Ag5, and g-CN@Ag10 can produce blue, blue-green, chartreuse, and yellow colored ECL emissions, respectively, by using K2S2O8 as the coreagent. The ECL emission wavelength of g-CN@Ag can be regulated from 460 to 565 nm by modulating the content of the immobilized Ag NPs. Then, a multicolor ECL detection array was fabricated by using g-CN, g-CN@Ag1, g-CN@Ag5, and g-CN@Ag10 as four ECL luminophores. Dopamine was detected based on its inhibition effect on the multicolor ECL emissions. The linear range is from 0.1 nM to 1 mM with the lowest detection limit of 44 pM. Then, machine learning-assisted multiparameter concentration prediction of dopamine was further carried out by combining the deep neural network (DNN) algorithm. This work provides a new avenue to regulate the ECL emission wavelength of g-CN by using the metal nanoparticle modification strategy and presents an effective machine learning-assisted multicolor ECL detection strategy for accurate multiparameter quantitative detection.

Electrochemiluminescent evaluation of GLUT4 expression in rat adipocytes induced by Ganoderma lucidum polysaccharides

Glucose transporter 4 (GLUT4) directly facilitates cellular uptake of glucose and plays a crucial role in mammalian adipose tissue glucose metabolism. In this work, we constructed a cytosensor for sensitive electrochemiluminescence (ECL) detection of GLUT4 in rat adipocytes (RA cells). A carbon nanotube sponge (CNTSP) was selected to fabricate a permeable electrode to overcome the steric hindrance of cells on the electrode. The expression of GLUT4 after treatment with Ganoderma lucidum polysaccharide (GLP) was assessed by analyzing the luminescence emitted from cell-surface ECL probes. Our preliminary results suggest that GLP promote the expression of GLUT4, thereby enhancing the uptake of the fluorescent glucose 2-NBDG. Treatment with GLP affected GLUT4 expression in RA cells in a dose-dependent manner. Additionally, the ECL cytosensor contributes to the development of ECL imaging of receptors on the cell surface for clinical drug evaluation.

Local electrochemiluminescence imaging using scanning electrochemical cell microscopy

In this communication, local electrochemiluminescence (ECL) imaging is achieved using scanning electrochemical cell microscopy (SECCM) to create a localized region for the occurrence of ECL reaction. The system is demonstrated using a droplet at the micropipette that is contact with the prepared Ru-Silica@Au particles at indium tin oxide (ITO) slide. Tri-n-propylamine (TPrA) in the droplet reacts with ruthenium complex in a 10 μm-diameter-region to produce ECL emission, which is recorded by photo multiplier tube (PMT) underneath the ITO slide. By contacting each local region consecutively, the distribution of steady-state current and the related ECL emission at the ITO surface is imaged. The local ECL intensity show an approximately linear dependence with the current, but obvious deviation from the linear curve is observed at some regions. This result suggests that the ECL emission is not only determined by the transferred electron number in the electrochemical reaction, and also affected by local environments at ITO surface. As compared with the traditionally used ECL imaging in the bulk solution, this strategy avoids the cross-talking of ECL emission from nearby regions, and could offer a new way to unveil more molecular mechanism in the ECL reaction.

Electrochemiluminescence-Based Single-Particle Tracking of the Biomolecules Moving along Intercellular Membrane Nanotubes between Live Cells.

Electrochemiluminescence (ECL) imaging, a rapidly evolving technology, has attracted significant attention in the field of cellular imaging. However, its primary limitation lies in its inability to analyze the motion behaviors of individual particles in live cellular environments. In this study, we leveraged the exceptional ECL properties of quantum dots (QDs) and the excellent electrochemical properties of carbon dots (CDs) to develop a high-brightness ECL nanoprobe (CDs-QDs) for real-time ECL imaging between living cells. This nanoprobe has excellent signal-to-noise ratio imaging capabilities for the single-particle tracking (SPT) of biomolecules. Our finding elucidated the enhanced ECL mechanism of CDs-QDs in the presence of reactive oxygen species through photoluminescence, electrochemistry, and ECL techniques. We further tracked the movement of single particles on membrane nanotubes between live cells and confirmed that the ECL-based SPT technique using CD-QD nanoparticles is an effective approach for monitoring the transport behaviors of biomolecules on membrane nanotubes between live cells. This opens a promising avenue for the advancement of ECL-based single-particle detection and the dynamic quantitative imaging of biomolecules.

Osteogenic differentiation of mesenchymal stem cell spheroids: A microfluidic device and electrochemiluminescence imaging study

Human mesenchymal stem cells (MSCs) have attracted attention as a major cellular source for regenerative medicine and preclinical studies. Three-dimensional (3D) cell culture systems can be used to construct physiologically relevant MSC spheroids with enhanced tissue regeneration capacity. However, what aspect of the MSC spheroids retains the regeneration capacity is not yet fully understood. Here, we induced osteoblast differentiation of MSC spheroids and investigated their respiratory activity using electrochemiluminescence (ECL) imaging developed in our previous study. In parallel, the ability of MSC spheroids to induce angiogenesis was investigated in a microfluidic device with a co-culture of endothelial cells. We found that the osteogenic differentiation of MSCs induced changes in their metabolic activity (respiratory activity of the spheroids decreased during differentiation) and lead to the loss of their angiogenesis-inducing ability. In other words, it is suggested that maintaining the stem cell nature with in the MSC spheroids is an important factor for tissue regeneration. In this study, we demonstrated the effective use of ECL imaging and microfluidic systems for the evaluation of MSC spheroids, providing new insights into stem cell tissue engineering.

The carbon dots with near-infrared electrochemiluminescence emission and low excitation potential for ultrasensitive analysis of microRNA-222

In this work, nitrogen and sulfur codoped near-infrared emission carbon dots (N,S-NIR-CDs) were used as neoteric electrochemiluminescence (ECL) emitters with high efficiency to construct a biosensor for ultrasensitive analysis of microRNA-222 (miRNA-222), which has been regarded as prospective biomarkers for early cancer diagnosis. Impressively, compared to conventional CDs with short ECL wavelength and large excitation voltage, N,S-NIR-CDs possessed wide sp2 domains and narrow band gap, leading to the near-infrared ECL emission at 680 nm and low excitation potential from −1.0 to 0 V, which not only decreased the photochemical damage for biomolecules but also reduced the side reaction. Moreover, an improved T7 Exonuclease induced cascade amplification (EICA) strategy was designed to transform trace miRNA-222 into plentiful output DNA in dual-cycle for greatly improving the target conversion efficiency. Therefore, by combining the N,S-NIR-CDs as neoteric ECL emitters and EICA strategy as signal amplifier, the constructed ECL biosensor could realize the ultrasensitive analysis of miRNA-222 with a identification limit of 5.65 aM and successfully employed in miRNA-222 analysis from liver cancer cell (HCCLM3 and MHCC-97L) lysate. This strategy developed a kind of neoteric CDs with NIR ECL emission and low excitation potential to establish a highly efficient biosensor for biomarker analysis, which prepared a road for early diseases diagnosis and lied a foundation for biological ECL imaging.

Smartphone-assisted electrochemiluminescence imaging test strips towards dual-signal visualized and sensitive monitoring of aflatoxin B1 in corn samples

Aflatoxins B1 (AFB1) contamination in agro-food holds great threaten to human and animal health. Conventional test strips for rapid AFB1 visualized monitoring remains challenged by improvement of sensitivity and matrix interference resistance. In this case, we developed a portable electrochemiluminescence (ECL) imaging test strip with dual-signal outputs for AFB1 quantification in corn samples. Ru-PEI@SiO2@Au nanospheres were synthesized for bonding with anti-AFB1 antibody and then colorimetrical signal-reported on test line through the capillary flow at strips. Meanwhile, ECL imaging signal of the constructed carbon-ink-based working electrode on polyvinyl chloride substrate of strips was exported under an applied potential of 1.25 V. The whole ECL test strips not only endowed convenient colorimetric responses but guaranteed quick-witted ECL image distinguishment even at extremely low AFB1 content. The detection limit of this ECL imaging-integrated mode was 10-fold lower than that of only colorimetric mode. Furthermore, satisfactory selectivity, reliability and practicability of the as-proposed ECL test strips were demonstrated. This work offered a promising platform for on-site, accurate and sensitive detection of pollutants in foods.

Coupled Poly(ethylenimine) Coreactant to Enhance Electrochemiluminescence of Polymer Dots for Array Imaging of Protein Biomarkers.

Traditional electrochemiluminescent (ECL) bioanalysis suffers from the demand for excessive external coreactants and the damage of reaction intermediates. In this work, a poly(ethylenimine) (PEI)-coupled ECL emitter was proposed by covalently coupling tertiary amine-rich PEI to polymer dots (Pdots). The coupled PEI might act as a highly efficient coreactant to enhance the ECL emission of Pdots through intramolecular electron transfer, reducing the electron transfer distance between emitter and coreactant intermediates and avoiding the disadvantages of traditional ECL systems. Through modification of the PEI-Pdots with tDNA, a sequence partially complementary to cDNA that was complementary to the aptamer of target protein biomarker (aDNA), tDNA-PEI-Pdots were obtained. The biosensors were produced using Au/indium tin oxide (ITO) with an aDNA/cDNA hybrid, and an ECL imaging biosensor array was constructed for ultrasensitive detection of protein biomarkers. Using vascular endothelial growth factor 165 (VEGF165) as a protein model, the proposed ECL imaging method containing two simple incubations with target samples and then tDNA-PEI-Pdots showed a detectable range of 1 pg mL-1 to 100 ng mL-1 and a detection limit of 0.71 pg mL-1, as well as excellent performance such as low toxicity, high sensitivity, excellent selectivity, good accuracy, and acceptable fabrication reproducibility. The PEI-coupled Pdots provide a new avenue for the design of ECL emitters and the application of ECL imaging in disease biomarker detection.

Near-IR Photoinduced Electrochemiluminescence Imaging with Structured Silicon Photoanodes.

Infrared (IR) imaging devices that convert IR irradiation (invisible to the human eye) to a visible signal are based on solid-state components. Here, we introduce an alternative concept based on light-addressable electrochemistry (i.e., electrochemistry spatially confined under the action of a light stimulus) that involves the use of a liquid electrolyte. In this method, the projection of a near-IR image (λexc = 850 or 840 nm) onto a photoactive Si-based photoanode, immersed into a liquid phase, triggers locally the photoinduced electrochemiluminescence (PECL) of the efficient [Ru(bpy)3]2+-TPrA system. This leads to the local conversion of near-IR light to visible (λPECL = 632 nm) light. We demonstrate that compared to planar Si photoanodes, the use of a micropillar Si array leads to a large enhancement of local light generation and considerably improves the resolution of the PECL image by preventing photogenerated minority carriers from diffusing laterally. These results are important for the design of original light conversion devices and can lead to important applications in photothermal imaging and analytical chemistry.