Elastomeric Opal Films Research Articles

Porous Mixed-Metal Oxide Li-Ion Battery Electrodes by Shear-Induced Co-assembly of Precursors and Tailored Polymer Particles.

Due to their various applications, metal oxides are of high interest for fundamental research and commercial usage. Per applications as catalysts or electrochemical devices, the tailored design of metal oxides featuring a high specific surface area and additional functionalities is of the utmost importance for the performance of the resulting materials. We report a new method for preparing free-standing films consisting of hierarchically porous metal oxides (titanium and niobium based) by combining emulsion polymerization and shear-induced monodisperse particle self-assembly in the presence of sol-gel precursors. After thermal treatment, the resulting porous materials can be used as electrodes in Li-ion batteries. The titanium and niobium sol-gel precursors were partially immobilized to the surface of organic core-interlayer particles featuring hydroxyl groups to obtain hybrid organic-inorganic particles through the melt-shear organization process. Free-standing particle-based films, in analogy to elastomeric opal films and colloidal crystals, can be prepared in a convenient one-step preparation process. After thermal treatment, ordered pores are obtained, while the pristine metal oxide precursor shell can be converted to the (mixed) metal oxide matrix. Heat treatment under CO2 leads to mixed-TiNb oxide/carbon hybrid materials. The highly porous derivative structure enhances electrolyte permeation. When tested as Li-ion battery electrodes, it shows a specific capacity of 335 mAh·g-1 at a rate of 10 mA·g-1. After 1000 cycles at 250 mA·g-1, the electrodes still provided a specific capacity of 191 mAh·g-1.

Embedding Photoacids into Polymer Opal Structures: Synergistic Effects on Optical and Stimuli-Responsive Features.

Opal films with their vivid structural colors represent a field of tremendous interest and obtained materials offer the possibility for many applications, such as optical sensors or anti-counterfeiting materials. A convenient method for the generation of opal structures relies on the tailored design of core-interlayer-shell (CIS) particles. Within the present study, elastomeric opal films were combined with stimuli-responsive photoacids to further influence the optical properties of structurally colored materials. Starting from cross-linked polystyrene (PS) core particles featuring a hydroxy-rich and polar soft shell, opal films were prepared by application of the melt-shear organization technique. The photoacid tris(2,2,2-trifluoroethyl) 8-hydroxypyrene-1,3,6-trisulfonate (TFEHTS) could be conveniently incorporated during freeze-drying the particle dispersion and prior to the melt-shear organization. Furthermore, the polar opal matrix featuring hydroxylic moieties enabled excited-state proton transfer (ESPT), which is proved by spectroscopic evaluation. Finally, the influence of the photoacid on the optical properties of the 3-dimensional colloidal crystals were investigated within different experimental conditions. The angle dependence of the emission spectra unambiguously shows the selective suppression of the photoacid’s fluorescence in its deprotonated state.

Dye-Loaded Mechanochromic and pH-Responsive Elastomeric Opal Films.

In this work, the preparation and fabrication of elastomeric opal films revealing reversible mechanochromic and pH-responsive features are reported. The core-interlayer-shell (CIS) particles are synthesized via stepwise emulsion polymerization leading to hard core (polystyrene), crosslinked interlayer (poly(methyl methacrylate-co-allyl methacrylate), and soft poly(ethyl acrylate-co-butyl acrylate-co-(2-hydroxyethyl) methacrylate) shell particles featuring a size of 294.9±14.8nm. This particle architecture enables the application of the melt-shear organization technique leading to elastomeric opal films with orange, respectively, green brilliant reflection colors dependent on the angle of view. Moreover, the hydroxyl moieties as part of the particle shell are advantageously used for subsequent thermally induced crosslinking reactions enabling the preparation of reversibly tunable mechanochromic structural colors based on Bragg's law of diffraction. Additionally, the CIS particles can be loaded upon extrusion or chemically by a postfunctionalization strategy with organic dyes implying pH-responsive features. This convenient protocol for preparing multi-responsive, reversibly stretch-tunable opal films is expected to enable a new material family for anti-counterfeiting applications based on external triggers.

Utilizing stretch-tunable thermochromic elastomeric opal films as novel reversible switchable photonic materials.

In this work, the preparation of highly thermoresponsive and fully reversible stretch-tunable elastomeric opal films featuring switchable structural colors is reported. Novel particle architectures based on poly(diethylene glycol methylether methacrylate-co-ethyl acrylate) (PDEGMEMA-co-PEA) as shell polymer are synthesized via seeded and stepwise emulsion polymerization protocols. The use of DEGMEMA as comonomer and herein established synthetic strategies leads to monodisperse soft shell particles, which can be directly processed to opal films by using the feasible melt-shear organization technique. Subsequent UV crosslinking strategies open access to mechanically stable and homogeneous elastomeric opal films. The structural colors of the opal films feature mechano- and thermoresponsiveness, which is found to be fully reversible. Optical characterization shows that the combination of both stimuli provokes a photonic bandgap shift of more than 50 nm from 560 nm in the stretched state to 611 nm in the fully swollen state. In addition, versatile colorful patterns onto the colloidal crystal structure are produced by spatial UV-induced crosslinking by using a photomask. This facile approach enables the generation of spatially cross-linked switchable opal films with fascinating optical properties. Herein described strategies for the preparation of PDEGMEMA-containing colloidal architectures, application of the melt-shear ordering technique, and patterned crosslinking of the final opal films open access to novel stimuli-responsive colloidal crystal films, which are expected to be promising materials in the field of security and sensing applications.

Redox- and mechano-chromic response of metallopolymer-based elastomeric colloidal crystal films

A novel and convenient route for the preparation of monodisperse ferrocene-containing core-interlayer-shell particles using emulsion polymerisation protocols is described. These metallopolymer-based particles can be used to produce highly ordered elastomeric opal films with fascinating distinct reflection colours. The present work additionally describes the combined addressability of both stimuli, redox-chemistry and mechanical stress. The obtained materials are interesting since application of the melt-shear process followed by crosslinking of the matrix provides access to large-area, mechano-responsive elastomeric opal films featuring an additional redox response. Both, basic synthesis aspects and first steps towards application in the field of stimuli-responsive sensing of respective materials are discussed.

Thermo-cross-linked Elastomeric Opal Films

An efficient and convenient thermal cross-linking protocol in elastomeric opal films leading to fully reversible and stretch-tunable optical materials is reported. In this study, functional monodisperse core-shell particles were arranged in a face-centered cubic (fcc) lattice structure by a melt flow process. A problem up to now was that un-cross-linked films could not be drawn fully reversibly and hence lost their optical and mechanical performance. After thermal cross-linking reaction, the obtained films can be drawn like rubbers and the color of their Bragg reflection changes because of controlled lattice deformation, which makes the cross-linked films mechanochromic sensors. Different techniques were developed for the cross-linking of the films a posteriori, after their preparation in the melt flow process. A photo-cross-linking approach was reported earlier. This study now deals with a very efficient thermo-cross-linking approach based on the chemistry of hydroxyl- and isocyanate-functionalities that form urethane bridges. The focus of the present work is the mechanism and efficiency of this cross-linking process for elastomeric opal films with excellent mechanical and optical properties.

Paper-supported elastomeric opal films for enhanced and reversible solvatochromic response

Paper-supported solvent-responsive elastomeric opal films based on hard-soft core-interlayer-shell spheres featuring remarkably distinct iridescent reflection colors were investigated. By using extrusion and compression molding, elastomeric opal films could be obtained, which were incorporated into a porous paper sheet to build robust composites. Swelling of the opal paper composites caused by various solvents was accompanied with a tremendous photonic band gap shift of the reflection colors. The combination of the extraordinary optical properties of the elastomeric opal films used with the remarkable features of highly porous paper can be the basis for a whole family of polymer-based soft sensors featuring a fascinating optical, fast and reversible response.

Fully Reversible Shape Transition of Soft Spheres in Elastomeric Polymer Opal Films

Core-interlayer-shell (CIS) beads featuring noncross-linked hard cores were used to prepare large and well-defined elastomeric opal films with remarkably distinct iridescent reflection colors. The matrix of the opal films was cross-linked by UV-irradiation after compression molding of the CIS beads mixed with a bifunctional monomer. Stress-induced deformation of the embedded PS cores lead to hexagonally arranged spheroid oblates with an aspect ratio of 2.5. Optical characterization shows that bead deformation provokes a tremendous photonic band gap shift of about 160 nm. Fully reversible shape transition from the spheroid oblates back to the spherical beads and hence full recovery of the original photonic band gap can be achieved.

Reversible Light-, Thermo-, and Mechano-Responsive Elastomeric Polymer Opal Films

A new strategy to achieve easily scalable triple stimuli-responsive elastomeric opal films for applications as stretch-tunable photonic band gap materials is reported. Novel monodisperse highly functional core-interlayer-shell beads are obtained by semicontinuous emulsion polymerization featuring a temperature-sensitive fluorescent rhodamine dye either locally restricted in the core or the shell of prepared beads. After extrusion and compression molding, homogeneous elastomeric opal films with fascinating stretch-tunable and temperature-dependent fluorescent properties can be obtained. Applying strains of only a few percent lead to significant blue shift of the reflected colors making these films excellent candidates for applications as deformation sensors. Higher strains up to 90% lead to a tremendous Bragg reflection color change caused by transition from the (111) to the (200) lattice plane. The well-ordered opaline structure with its stop band at the emission frequency of the incorporated fluorescent ...