Effects Of Water Contamination Research Articles

Review of Mining and Sanitation Waste Water Management and Their Contribution to Water Contamination in Zambia

This research digs into the convoluted topography of water contamination in Zambia's Copperbelt Province, with an emphasis on the important contributions of mining and sewage effluent. This report provides major conclusions about the origins, types, and effects of contaminants in the region's water bodies based on a thorough review of current research and empirical evidence. Mining activities emerge as a major source of water pollution, with effluent contaminated with heavy metals, sulphates, and other compounds that pose serious hazards to aquatic ecosystems and public health. Despite efforts to improve wastewater treatment, shortcomings persist, resulting in the leakage of toxic effluent into neighboring waterways. Similarly, sewage wastewater contributes to contamination by including faecal coliforms, nutrients, oils, and heavy metals. The effects of water contamination are far-reaching, as indicated by increasing pollutant concentrations in stream sediments and downstream bodies. Aquatic life suffers from habitat destruction, diminished biodiversity, and negative health effects, while communities relying on these water supplies face increased health risks. Given these issues, the paper analyses potential solutions and recommendations for effective wastewater management, with a focus on interdisciplinary collaboration, technical innovation, and regulatory enforcement. Initiatives fostering recycling, resource recovery, and the implementation of advanced treatment technology hold promise for minimizing water pollution and maintaining sustainable water management practices in the Copperbelt Province.

Water Contamination and Its Effects on Human Health: A Review

The study was done on the effect of water contamination on human health. The review revealed a complex network of factors contributing to water contamination, including home sewage, industrial discharges, pesticides, plastics, and systemic management deficiencies. The study highlighted the widespread effects on human health, including skin disorders, serious illnesses like cancer and diarrheal infections, particularly affecting children. It emphasized the need for synchronized efforts to alleviate pollution sources, focusing on sustainable farming methodologies and responsible waste management. The study also explored advanced wastewater treatment techniques, highlighting the urgent need for their widespread use worldwide. However, the study acknowledged limitations, such as geographical scope and contamination origins. Recommendations included a comprehensive strategy involving sustainable behaviors, strict laws, and advanced treatment technology. The study emphasized the need for governments, companies, and communities to work together to implement strong legislation, improve infrastructure, and increase knowledge about water quality. Addressing these challenges requires a holistic approach, focusing on mitigating constraints through ongoing research, innovation, and international collaboration.

Accelerating Real-Time Analysis of Gas Diffusion Electrodes Using Different Coupled Mass Spectrometry Techniques

Due to the rapid development of new catalysts, simple electrochemical screening methods are needed to evaluate the activity and stability of catalyst layers. Setups for these applications already exist: the so-called Scanning Flow Cells (SFCs) unify real-time electrochemical activity and dissolution stability analysis in a high-throughput fashion and find applications in a broad range of topics, such as battery research, 1 oxygen evolution reaction catalysts performance,2 and photo-electrochemistry.3 Yet, the low current densities reached in the system hinder the direct comparison of the results to real devices.4 Gas diffusion electrode (GDE) based setups present a promising alternative to Aqueous Model Systems (AMS) due to their ability to achieve higher current densities. Compared to two electrode full cells (fuel cell or water electrolyser), GDE half-cells are operated in a three-electrode configuration with liquid electrolyte. However, as in fuel cells, gasses reach the catalyst layer through a flow field, achieving relevant current densities up to 2 A cm-2. The GDE half- cell offers the advantage of studying the isolated reaction of the working electrode by applying controlled potentials with a reference electrode. While the GDE offers a simplified approach, the assembly process can be time-consuming, and the overall catalyst throughput analysis could be further optimised.5,6 In this context, we present a novel setup that enables the rapid examination of catalyst layers for fuel cells, providing more realistic conditions while simultaneously investigating degradation processes. The setup consists of an optimised SFC based on lower internal resistance and an additional flow field to purge the catalyst layer with different gasses. As the common SFC, the presented Scanning Gas Diffusion Electrode half cell (S-GDE) can be connected to an Inductively Coupled Plasma Mass Spectrometer (ICP-MS) to quantify the dissolution of metals in real-time. Furthermore, the gas-sensitive Mass Spectrometer can be connected to the gas stream of the cell, enabling the detection of volatile products via on-line electrochemical mass spectrometry (OLEMS). The simple replacement of catalyst layers in the S-GDE allows fast analysis of multiple catalysts consecutively. Still, as the aim is to facilitate high-throughput electrochemistry, developing the S-GDE is ongoing. Furthermore, the optimised cell can reach higher current densities than cells of a similar design, allowing accelerated stress tests (ASTs) and the performance of polarisation curves.The S-GDE will offer a new perspective on realistic catalyst layers, their performance, and catalyst/support degradation processes, e.g. Pt dissolution and carbon corrosion. The increasing demand for new catalyst materials highlights the need for their rapid evaluation under realistic conditions, taking into account not only their electrochemical performance but also their stability. Lüchtefeld J, Hemmelmann H, Wachs S, Mayrhofer KJ, Elm MT, Berkes BB. Effect of Water Contamination on the Transition Metal Dissolution in Water-Enriched Electrolyte: A Mechanistic Insight into a New Type of Dissolution. The Journal of Physical Chemistry C. 2022;126(40):17204–11.Zlatar M, Nater D, Escalera-López D, Joy RM, Pobedinskas P, Haenen K, et Evaluating the stability of Ir single atom and Ru atomic cluster oxygen evolution reaction electrocatalysts. Electrochimica Acta. 2023;444:141982.Jenewein KJ, Kormányos A, Knöppel J, Mayrhofer KJJ, Cherevko S. Accessing In Situ Photocorrosion under Realistic Light Conditions: Photoelectrochemical Scanning Flow Cell Coupled to Online ICP-MS. ACS Measurement Science Au. 2021;1(2):74–81.Ehelebe K, Escalera-López D, Cherevko S. Limitations of aqueous model systems in the stability assessment of electrocatalysts for oxygen reactions in fuel cell and Current Opinion in Electrochemistry. 2021;29:100832.Ehelebe K, Knöppel J, Bierling M, Mayerhöfer B, Böhm T, Kulyk N, et Platinum Dissolution in Realistic Fuel Cell Catalyst Layers. Angewandte Chemie (International ed in English). 2021;60(16):8882–8.Ehelebe K, Seeberger D, Paul MTY, Thiele S, Mayrhofer KJJ, Cherevko S. Evaluating Electrocatalysts at Relevant Currents in a Half-Cell: The Impact of Pt Loading on Oxygen Reduction Reaction. Journal of The Electrochemical Society. 2019;166(16):F1259-F68. Figure 1: The S-GDE unifies the real conditions approach of the GDE and the high throughput approach of the SFC and the connection to two mass spectrometer enables the real time detection of dissolved catalyst (ICP-MS) and volatile products (OLEMS). Figure 1

Human Health Risks due to Exposure to Water Pollution: A Review

Water resources are crucial in developing any area as they serve as a major source of potable, agricultural, and industrial water. Water contamination, caused by natural and anthropogenic activities, poses a significant threat to public health globally. This review synthesizes data from various studies published in national and international journals, as well as reports from governmental and non-governmental organizations. Our primary objective is to understand and review previous research on water pollution, contamination types, and the effects of water contamination on public health. Water pollution studies generally involve a scientific understanding of the biological, chemical, and physical processes that control the movement of contaminants in the underground environment. The nature and severity of health consequences vary based on several factors, including the chemical composition, duration of exposure, and concentration of pollutants. This work highlights the human health risks associated with current research topics such as anthropogenic, geogenic, microplastics, pharmaceuticals, and heavy metals. A section on remedial measures and mitigation strategies is included to emphasize sustainable approaches to water conservation, replenishment, and sustainability. However, there is a lack of comprehensive knowledge regarding the distribution, toxic effects, and human health risks associated with different sources of contamination. This review thus establishes links between multiple sources of pollution, their toxicity to human health, and approaches to health risk assessment.

Effect of Water Contamination on the Transition Metal Dissolution in Water-Enriched Electrolyte: A Mechanistic Insight into a New Type of Dissolution

Effect of Water Contamination on the Transition Metal Dissolution in Water-Enriched Electrolyte: A Mechanistic Insight into a New Type of Dissolution

Effects of Water Contamination on Micropitting and Rolling Contact Fatigue of Bearing Steels

Abstract In this research, the effects of water contamination in oil were investigated on two kinds of failures that occur in bearing steel: micropitting and rolling contact fatigue. Whereas the presence of water in the oil had little effect on the generation of surface wear in these experiments, increases in the occurrences of micropitting and rolling contact fatigue were observed due to the presence of either dissolved or free water in lubricants. Additionally, the presence of white etching matter at crack interfaces was observed and evaluated. The experimental results showed that water content can be considered as a significant factor that accelerates the formation of micropitting and fatigue cracks in rolling bearings.

Liquid medium annealing for fabricating durable perovskite solar cells with improved reproducibility.

Solution processing of semiconductors is highly promising for the high-throughput production of cost-effective electronics and optoelectronics. Although hybrid perovskites have potential in various device applications, challenges remain in the development of high-quality materials with simultaneously improved processing reproducibility and scalability. Here, we report a liquid medium annealing (LMA) technology that creates a robust chemical environment and constant heating field to modulate crystal growth over the entire film. Our method produces films with high crystallinity, fewer defects, desired stoichiometry, and overall film homogeneity. The resulting perovskite solar cells (PSCs) yield a stabilized power output of 24.04% (certified 23.7%, 0.08 cm2) and maintain 95% of their initial power conversion efficiency (PCE) after 2000 hours of operation. In addition, the 1-cm2 PSCs exhibit a stabilized power output of 23.15% (certified PCE 22.3%) and keep 90% of their initial PCE after 1120 hours of operation, which illustrates their feasibility for scalable fabrication. LMA is less climate dependent and produces devices in-house with negligible performance variance year round. This method thus opens a new and effective avenue to improving the quality of perovskite films and photovoltaic devices in a scalable and reproducible manner.

Evening out the heat

Solar Cells The conversion of precursors into the active layer of perovskite solar cells normally occurs by heating the underlying substrate. Conversion tends to occur near the top of the film, where solvent is lost, and unwanted preheating of reactants occurs near the substrate before the reaction. Li et al. show that the use of a surrounding heat transfer oil (anisole) leads to more rapid and even heating, removes solvent, and avoids air and water contamination effects. The larger grains and more uniform films led a much greater retention of efficiency in moving from small-area to large-area devices. Science , abh3884, this issue p. [561][1] [1]: /lookup/doi/10.1126/science.abh3884

A simulation-based approach for removing the effect of water contamination on SMAP soil moisture retrieval over the Qinghai-Tibet Plateau

ABSTRACT L-band passive microwave remote sensing is currently the optimum tool for the large-scale soil moisture mapping. However, due to the coarse spatial resolution of passive microwave remote sensing, the existence and dynamic changes of water bodies in the field of view would affect the performance of soil moisture retrieval. The Qinghai-Tibet Plateau (QTP) is a densely populated area of lakes in China, and the correction of water contamination effect is much more challenging. In this letter, we proposed a simulation-based approach which utilizes a radiative transfer model to simulate the brightness temperature (TB) of water bodies to correct the Soil Moisture Active Passive (SMAP) data over the QTP, taking into account of wind speed, surface temperature and salinity of lakes. The simulated data and water area fraction obtained from a dynamic map of water bodies were applied to remove the effect of water contamination. Results showed that the relatively low SMAP TBs surrounding both small and large lakes could be eliminated and do not have correlation with the water area fraction after using the proposed approach. Validation results in the Naqu network demonstrated that the simulation-based approach can effectively remove the water contamination from SMAP data with improved soil moisture retrievals.

A statistical analysis of the effects of water contamination on rural areas

A statistical analysis of the effects of water contamination on rural areas

Effect of water contamination on transmissivity behaviour of nonwoven geotextile

Nonwoven geotextiles are one of the most widely used geosynthetic materials in drainage and filtration in geotechnical engineering works and applications. In the present study, drainage property of geotextile fabric with three levels of water contamination (20, 40, and 60 gpl) and with clean water has been studied with the variation of transverse loads (1, 3, 5, and 7 kPa) and fabric mass density (300, 600, and 900 g/m2). Transmissivity of geotextile is found to be lower at higher level of water contamination. The effect of water contamination concentration is higher for fabric with higher mass density. However, the effect of contamination on geotextile material is lower at higher transverse load. The effect of transverse load on transmissivity of geotextile is higher for 300 g/m2 as compared to 600 and 900 g/m2. Although the reduction in transmissivity of fabric with higher mass density (900 g/m2) is higher, still the fabric exhibits better transmissivity behaviour as compared to 300 and 600 g/m2.

Снижение контаминации воды для обеспечения качества и безопасности продукции пищевых предприятий

Introduction. Chemical factor presupposes substances that enter the finished product and reduce its quality. Water used in production process can be a source of such substances. The domestic drinking water supply system may contain various contaminants that possess toxic and carcinogenic properties and can affect the quality characteristics of food products. Study objects and methods. The research featured popular water pollutants found in the drinking water supply system, components of fruit and whey beverages, and the process of adsorption extraction of the contaminants by various sorbents. Results and discussion. The paper focuses on the effect of water contamination as a dangerous chemical factor on the quality of restored whey products. The study revealed the effect of organic water pollutants on the formulation components of reduced fruit and whey beverages, including interaction with proteins, lactose, and vitamins of the reduced whey. The research also featured such components of fruit and whey vitamin beverages as anthocyanins, catechins, leucoanthocyanins, and karatine, as well as additives introduced to regulate the sensory properties and improve shelf life. The paper introduces a new method for reducing water contamination based on adsorption processes for extracting organic compounds from aqueous solutions. It describes the specifics, patterns, and mechanisms of adsorption. Activated carbons of SKD-515, AG-OV-1, and AG-3 brands proved to have the best adsorption capacity for both chloroform and trichloroethylene, which makes it possible to recommend them for further research and practical use. A study of the kinetic and dynamic characteristics of the process resulted in the optimal parameters of adsorption columns and operation modes of the adsorption filter. A production flowchart describes the introduction of the adsorption posttreatment stage in the technological process of producing fruit and whey beverages. Conclusion. The proposed method of water decontamination partially reduced the chemical factor and improved the quality of the finished products.

Surface of Half-Neutralized Diamine Triflate Ionic Liquids. A Molecular Dynamics Study of Structure, Thermodynamics, and Kinetics of Water Absorption and Evaporation.

Surface properties of room temperature ionic liquids (RTILs) consisting of half neutralized diamine cations (H2N-(CH2)n-NH3+, n = 2, 4) and triflate anions have been investigated by molecular dynamics simulations, based on an empirical atomistic force field. Planar slabs periodically repeated in 2D have been considered, and the temperature range 260 ≤ T ≤ 360 K has been covered, extending from below the melting and glass point to the equilibrium liquid range of the diamine compounds under investigation. Addition of water at 1% weight concentration allowed us to investigate the kinetics of water absorption through the RTIL surface, and to characterize the structural and dynamical properties of subsurface water. Animations of the simulation trajectory highlight the quick absorption of water molecules, progressing downhill in free energy and taking place without apparent intermediate kinetic stages. To verify and quantify these observations, a variant of the umbrella sampling algorithm has been applied to compute the variation of excess free energy upon displacing a water molecule along the normal to the surface, from the center of the slab to the vapor phase. The results provide a comprehensive picture of the thermodynamic properties underlying the kinetics of water absorption and evaporation through the surface, and they also provide the ratio of the equilibrium density of water in the vapor and liquid phase at the average concentration considered by simulations. A variety of properties such as the surface energy, the 90-10% width of the profile, the layering of different species at the interface, and the electrostatic double layer at the surface are computed and discussed, focusing on the effect of water contamination on all of them.

Optimizing Electrochemical Thermal Control Devices: Investigating the Effect of Water Contamination on Reversible Silver Thin-Film Plating

Reversible Electrochemical Mirror (REM) technology describes a variable emissivity system that can switch between reflective and transmissive states through the application of a voltage to electrodeposit and remove a reflective mirror film. Such a system is an ideal replacement for traditional thermal control methods in space (louvres and radiators), because it is lighter, has no moving parts, and offers a finer degree of tunability. We have investigated various silver-plating systems that achieve this switching effect, including (1) AgNO3 in DMSO solvent, as well as (2) AgI and LiBr salts in γ-Butyrolactone. The effect of water contamination on these systems was determined, and the subsequent enhancement or degradation of the system quantified. While silver nucleation occurs more readily in water-contaminated systems, the presence of water may be detrimental to the stability and reversibility of the system such as more ready oxidation of the deposited film. For the DMSO/AgNO3 system, the addition of water also results in an increase in current during deposition (Figure 1). This is hypothesized to be a result of easier dissociation of AgNO3 in the presence of water which leads to greater silver ion conductivity. Thin film growth will be carried out on various substrates (indium tin oxide (ITO), silver, and gold) to determine the ways in which small amounts of water contamination affect the microstructure, optical reflectivity, reversibility, and stability of the system. Figure 1: Silver plating at -0.05 V in DMSO/AgNO3 systems (WE: ITO, CE: ITO, RE: Ag/AgNO3/0.1M AgNO3 in DMSO) with various amounts of water-doping. As the concentration of water increases, current increases. Figure 1

On-Line Monitoring of the Stability of Electrodes in Non-Aqueous Media

Stability of electrochemical systems is particularly important in applications. No matter if it is a fuel cell, a battery, a supercapacitor, a construction subject to corrosion or an electrode used for synthesis, economic considerations require a certain lifetime of these systems. Depending on the systems, instability can have several causes, like changes in the mechanical or crystal structure of electrodes, oxidation of materials, decomposition of electrolytes, loss of percolation and electrical conductivity, or material loss due dissolution. Many of these processes happen slowly, causing only minimal performance loss within laboratory timescales. Their studies involve therefore usually long-term measurements with ex situ analysis. In situ, real-time analysis requires very sophisticated and usually coupled analysis methods. In this work we show a powerful approach to study dissolution phenomena in non-aqueous electrochemical systems. A scanning electrochemical flow cell (SFC) combined with on-line inductively coupled plasma mass spectrometric (ICP-MS) analysis has proven to be a very valuable tool for the study of stability of electrocatalysts in aqueous solutions. This coupled technique is mainly connected to the works of Dr. Mayrhofer and Dr. Cherevko. It was very appealing to develop this method further and make it useable in organic systems too. This task might seem for the first glance to be almost trivial, however, the harsh conditions caused by the organic electrolytes limit the usability of materials to contrive these systems to a huge extent. Furthermore, the ICP-MS is standardized mainly for aqueous media and a lot of experimental work has to be devoted for the optimization of the device for each individual organic solvent. Most of the chemicals used are sensitive to atmospheric components, like O2, H2O, CO2 or even N2. Therefore, the experiments have to be carried out in a glovebox that ensures a controlled and very clean atmosphere. Platinum is often considered to be a model electrode and catalyst material. This metal is probably the most thoroughly studied one in electrochemistry, however, it still shows many interesting yet not well understood features. This is also true for the stability of the metal during potential cycling. The electrochemical stability window of organic electrolytes is usually much higher than that of water enabling the simultaneous cycling and downstream analysis of dissolution in a higher potential range. As a result, even the electrochemistry of platinum shows hitherto unveiled phenomena regarding its dissolution mechanism. In this work, we focus on the effect of water contamination, anions, cations and organic solvent molecules on the anodic and cathodic dissolution behavior of platinum. To demonstrate the benefits of this novel method on the field of non-aqueous electrochemistry the stability of other non-aqueous systems will be discussed shortly, too.

Equilibrium Structure, Hydrogen Bonding, and Proton Conductivity in Half-Neutralized Diamine Ionic Liquids.

Recent experiments on proton conducting ionic liquids point to half-neutralized diamine-triflate salts as promising candidates for applications in power generation and energy conversion electrochemical devices. Structural and dynamical properties of the simplest among these compounds are investigated by a combination of density functional theory (DFT) and molecular dynamics (MD) simulations based on an empirical force field. Three different cations have been considered, consisting of a pair of amine-ammonium terminations joined by a short aliphatic segment -(CH2) n- with n = 2, 3, and 4. First, the ground state structure, vibrational eigenstates, and hydrogen-bonding properties of single ions, neutral ion pairs, small neutral aggregates of up to eight ions, and molecularly thin hydrogen bonded wires have been investigated by DFT computations. Second, structural and dynamical properties of homogeneous liquid and amorphous phases are investigated by MD simulations over the temperature range of 200 ≤ T ≤ 440 K. Structure factors, radial distribution functions, diffusion coefficient, and electrical conductivity are computed and discussed, highlighting the inherent structural heterogeneity of these compounds. The core investigation, however, is the characterization of connected paths consisting of cation chains that could support proton transport via a Grotthuss-type mechanism. Since simulations are carried out using a force field of fixed bonding topology, this analysis is based on the equilibrium structure only, using geometrical criteria to identify potential paths for proton conduction. Paths of connected cations can reach a length of 80 cations and 30 Å, provided that bridging oxygen atoms from triflate anions are taken into account. The effects of water contamination at 1% weight concentration on the structure, dynamics, and paths for proton transport are discussed.

Effect of chronic sodium nitrite administration on the expression of fibronectin in interstitial tissue of mice testis: An immunohistochemical study

Background and Objectives: Nitrite and nitrate as common derivatives of nitrogen distribute throughout the body after consumption which consequently increases the content of their metabolites such as nitric oxide in biological fluids. High concentrations of nitrite and nitrate affect the fertility of men by changing the parameters of sperm. Half of the infertility problems are related to men. No study has been conducted on the possible effects of water contaminants on the expression of fibronectin in testicular interstitial tissue. Therefore, the present study aims to investigate the effects of chronic administration of sodium nitrite on the expression of fibronectin in interstitial tissue of mice testis using immunohistochemical assessments. Methods: This was an animal laboratory study conducted on male mice (n=24) who were divided into three groups: a control group and two treatment groups I and II. For 60 consecutive days, the control group received water containing no additives, and the treatment groups I and II water containing 3 and 50 mg/L of sodium nitrite, respectively. After sacrificing the animals, their testes were removed from both sides, and the right testicle was used for the immunohistochemical study and the left for real time polymerase chain reaction (RT-PCR) assessment. Results: The amount of fibronectin mRNA was 0.92 fold in treatment group I and 0.8 fold in treatment group II, which showed no significant differences between the groups. Moreover, the qualitative expression of this protein in the interstitial tissue reduced insignificantly in treatment group II compared to the other groups (p=0.094). Conclusion: Consuming water contaminated with sodium nitrite could not affect spermatogenesis through changing the expression of fibronectin in the interstitium of testis.

The effect of water contamination and host-related factors on ectoparasite load in an insectivorous bat.

We examined the effects of sex, age, and reproductive state of the insectivorous bat Pipistrellus kuhlii on the abundance and prevalence of arthropod ectoparasites (Macronyssidae and Cimicidae) in habitats with either sewage-polluted or natural bodies of water, in the Negev Desert, Israel. We chose water pollution as an environmental factor because of the importance of water availability in desert environments, particularly for P. kuhlii, which needs to drink on a daily basis. We predicted that parasite infestation rates would be affected by both environment and demographic cohort of the host. We found that female bats in the polluted site harbored significantly more mites than female bats in the natural site and that juveniles in the polluted site harbored significantly more cimicid individuals than juveniles in the natural site. We further found that age and sex (host-related factors) affected ectoparasite prevalence and intensity (i.e., the abundance of parasites) in the polluted site. Our results may suggest that the interaction between host-related and environment-related factors affected parasite infestations, with females and young bats being more susceptible to ectoparasites when foraging over polluted water. This effect may be particularly important for bats that must drink or forage above water for other wildlife that depend on drinking water for survival.

Development of a novel in-situ technique for hydrogen uptake evaluation from a lubricated tribocontact

Hydrogen in mechanical elements can be generated as a result of tribochemical reactions during surface-rubbing causing steel embrittlement. In this study, a new modified Devanathan-Stachurski setup in which a tribological charging cell is incorporated was developed in order to provide an online measurement of hydrogen permeation through steel from a lubricated metal-metal contact. This new technique enables the study of the hydrogen source and the rate of its permeation in a tribocontact. The effect of water contamination and the presence of conventional anti-wear and friction modifier additives in polyalphaolefin base oil on tribologically-induced hydrogen uptake were investigated. The results indicate significant influence of water on hydrogen uptake. The ZDDP anti-wear has promoted hydrogen uptake from the tribocontact. Whilst MoDTC friction modifier reduced the hydrogen permeation.

Properties of water-contaminated lubricating oil: variation with temperature and small water content

Water contamination is one of the most insidious factors in industrial applications. If the water content exceeds a certain level that the lubricating oil cannot accept, it may shorten the service of lubricating oil and damage machines gradually. Dynamic viscosity and permittivity are selected as performance indexes to study the effects of water contamination on lubricating oil. Models of water content considering both viscosity and permittivity of water in oil mixtures have been previously proposed to estimate the state of water-contaminated lubricating oil. However, temperature, which is the most significant factor for lubricating oil especially affecting the viscosity, as well as the permittivity, remains uninvestigated. Therefore, this paper investigates temperature and water content simultaneously to obtain the correlation with the viscosity and permittivity of lubricating oil, separately. The Vogel’s law is employed to express theoretical relationship between temperature and dynamic viscosity. The extended models are proposed in order to give good correlations with the viscosity and permittivity of water-contaminated lubricating oil as a function of temperature and water content. Moreover, this paper also presents the on-line monitoring system to monitor aforementioned parameters in real time. Consequently, a conclusion can be drawn that the dynamic viscosity and permittivity of lubricating oil have an approximate linear relationship with water content within small water content and a certain temperature span; the variations of used oil properties under different temperatures at a certain water content follow the same relationship as those of pure oil.