Heavy Atom Effect Research Articles

Sterically Twisted Mitochondria‐Targeting Photosensitizers for Augmented Near‐Infrared II Fluorescence‐Guided Photodynamic Immunotherapy

AbstractNear‐infrared (NIR) fluorescent mitochondria‐targeting photosensitizers (PSs) hold great potential for efficient image‐guided cancer phototherapy, but it remains challenging to develop PSs concurrently integrating high‐contrast NIR‐II fluorescence imaging and efficient therapeutic capabilities. Herein, a heptamethine cyanine (HCy) PS (termed I2HCy‐TPE nanoparticles (NPs)) by a molecular engineering strategy combining the heavy atom effect and structural distortion is reported. The heavy atom iodine is introduced to boost the intersystem crossing process, and the bulky tetraphenylethylene (TPE) moiety placed at the meso‐position of the heptamethine chain creates a highly distorted conformation in I2HCy‐TPE, theoretically verified by density functional theory calculations. This strategy synergistically promotes the 1O2 generation efficiency and assure the strong NIR fluorescence emission in aggregated states. Combining with the intrinsic mitochondria‐targeting capability, I2HCy‐TPE NPs are able to cause mitochondria‐targeted damage of cancer cells via the PDT and immunogenetic cell death‐triggered immune responses under NIR laser irradiation. In vivo experiments demonstrate that the biocompatible I2HCy‐TPE NPs present exceptional capability for in vivo NIR‐II fluorescence bioimaging of whole‐body and blood vessels, and exert efficient NIR‐II fluorescence‐guided photodynamic immunotherapy against triple‐negative breast cancer.

On the Dependence of the Rate of Deactivation of Triplet Excitations of a Number of Molecules on Their Ionization Potential and the Charge of the Nucleus of Heavy Atoms of the Solvent

Purpose. Establish the nature and reasons for the dependence of the change in the radiative rate constant of deactivation of triplet excitations of a number of molecules, caused by the effect of an external heavy atom, on their ionization potential from the ground state and the energy of the first excited singlet state.Methods. Kinetic methods were used to determine the rate constant for the deactivation of triplet excitations of organic molecules in solid solutions at 77 K. The solvents were n-heptane (neutral), carbon tetrachloride and benzene bromide (containing heavy chlorine and bromine atoms). The molecules studied were coronene, triphenylene, phenanthrene, naphthalene and biphenyl.Results. A linear relationship has been established between an increase in the ionization potential, the energy value of the first excited singlet state, and an increase in the change in the rate of radiative deactivation of triplet excitations of the studied molecules in carbon tetrachloride. It is shown that the increase in the change in the radiative deactivation rate of these molecules with an increase in their ionization potential is due to a decrease in the difference between the ionization energies and the first excited singlet state.Conclusion. The results of the study showed that there is a linear relationship between the increase in the radiative deactivation rate of triplet excitations of the studied molecules and their ionization potential. A linear relationship is also observed between the increase in the rate of radiative deactivation of triplet excitations of these molecules and the first excited singlet state. As the ionization potentials of the molecules under study increase, the difference between the ionization energy and the energy of the first excited singlet state decreases. This is the reason for the increase in the rate of deactivation of triplet excitations of molecules with an increase in their ionization potential.

Molecular engineering of tetraphenylethene/thiophene-based donor/π-bridge units to enhance the AIE effect and boost the oxygen-independent type-I ROS generation

The development of oxygen-independent type-I photosensitizers (PSs) with aggregation-induced emission (AIE) characteristics is highly in demand to treat hypoxic tumors but remains challenging. In this contribution, three anion-π+ AIE-PSs (TPEMA-SI, TPEMA-SSI, and TPETPA-SSI) with strong donor-π-acceptor (D-π-A) configurations were facially synthesized by modulating donor/π-bridge units. The strength of D-π-A configurations as well as the AIE-effect that collectively promotes the intersystem crossing (ISC) for boosting the type-I ROS could be enhanced significantly by tuning the electronic characters of D/π-bridge units. The anion-π+ AIE-PSs, with strong D-π-A configurations and heavy atom effect, produced a mixture of type-I as well as type-II ROS. Among them, TPETPA-SSI, with strong D-π-A configuration as well as greater AIE-effect, demonstrated superior type-I ROS generation efficiency. The biocompatible nanoparticles of anion-π+ AIE-PSs (AIE-PSs NPs) were fabricated after being encapsulated into an amphiphilic polymer (DSPE-PEG). The TPETPA-SSI NPs with superior ROS generation efficiency, demonstrate efficient PDT effects towards MCF-7 and U87MG cancer cells in both normoxia and hypoxia environments. This study provides insights into the design and development of type-I AIE-PSs by enhancing the strength of D-π-A configurations and the AIE effect

Ultrafast spin-flip exciton conversion and narrowband sky-blue luminescence in a fused polycyclic selenaborin emitter.

Thermally activated delayed fluorescence (TADF) materials with high photoluminescence quantum yields and fast reverse intersystem crossing (RISC) capabilities are highly desirable for applications in high-efficiency organic light-emitting diodes. Herein, we report the synthesis as well as structural and photophysical properties of 5,9-diselena-13b-boranaphtho[3,2,1-de]anthracene (SeBSe) as a narrowband-emissive TADF material. The incorporation of two selenium atoms into the boron-fused pentacyclic π-core results in a small singlet-triplet energy gap (ΔE ST) and thereby significant TADF properties. Moreover, theoretical calculations revealed a noticeable spin-orbit coupling enhancement between the singlet and triplet manifolds in SeBSe by virtue of the heavy-atom effect of selenium atoms. Consequently, SeBSe allows ultrafast spin-flip RISC with the rate constant surpassing 108 s-1, which far exceeds the corresponding fluorescence radiative decay rate (∼106 s-1), enabling an ideal singlet-triplet superimposed excited state.

Phosphorescence Properties of Boron/Bismuth Hybrid Conjugated Materials.

By introducing main-group elements such as boron and bismuth to π-conjugated systems, it is possible to modify the optical properties of π-conjugated materials through orbital interactions between the orbital on the elements and π/π*-orbitals, and the heavy atom effect. Moreover, bismuth, which is the heaviest stable element, induces a significant heavy atom effect, making organobismuth compounds promising for applications as phosphorescent materials. In this study, we synthesized new room-temperature phosphorescent materials by incorporating bismuth into thiophene units. The phosphorescence properties of these materials, such as emission lifetime and wavelength, could be further controlled by combining tricoordinate boron with the thienylbismuth structures. The synthesized bismuth- and boron-containing thiophene compounds exhibited phosphorescence at room temperature in both solution and solid states. Furthermore, the introduction of boron raised the energy of the triplet state in the π-conjugated system, resulting in a blue shift of the phosphorescence wavelength. The analysis of photoluminescence properties and TD-DFT calculations revealed that the introduction of bismuth enhances phosphorescence properties, whereas the introduction of boron further promotes intersystem crossing.

Organic room-temperature phosphorescence of imidazole-based films by self-assembly enhancement strategies

Organic room-temperature phosphorescence (RTP) shows high potential in optical fields, and self-assembly method via various non-covalent interactions is one facile and efficient way to enhance RTP performance. Herein, we investigated the RTP behaviors of three imidazole-based polymer films containing imidazole, methyl imidazolium, and benzyl imidazolium moieties, respectively. Their RTP behaviors and chemical structures were compared and discussed to explore the underlying structure-properties relationships. Owing to plenty of hydrogen bonds of polyacrylamide matrix to lock phosphors, imidazolium-based films gave an obvious green RTP due to cations and iodine anions-enhanced intersystem crossing. The blue RTP signals of imidazole-containing film was aroused by coordination with Zn2+ ions due to crosslinking and heavy atom effects. Moreover, the RTP performance of benzyl imidazolium-based film was remarkably improved by host-guest complexation with cucurbit[7]uril, showing a long lifetime up to 230.6 ms. By utilizing the difference in their RTP lifetimes, information encryption application was successfully achieved as a proof of concept.

Application of the Heavy-Atom Effect for (Sub)microsecond Thermally Activated Delayed Fluorescence and an All-Organic Light-Emitting Device with Low-Efficiency Roll-off.

The feature of abundant and environmentally friendly heavy atoms (HAs) like bromine to accelerate spin-forbidden transitions in organic molecules has been known for years. In combination with the easiness of incorporation, bromine derivatives of organic emitters showing thermally activated delayed fluorescence (TADF) emerge as a cheap and efficient solution for the slow reverse intersystem crossing (rISC) problem in such emitters and strong efficiency roll-off of all-organic light-emitting diodes (OLEDs). Here, we present a comprehensive photophysical study of a tri-PXZ-TRZ emitter reported previously and its hexabromo derivative showing a remarkable enhancement of rISC of up to 9 times and a short lifetime of delayed fluorescence of 2 μs. Analysis of the key molecular vibrations and TADF mechanism indicates almost compete blockage of the spin-flip transition between the charge-transfer states of different multiplicity 3CT → 1CT. In such a case, rISC as well as its enhancement by the HA is realized via the 3LE → 1CT transition, where 3LE is the triplet state localized on the same brominated phenoxazine donor involved in the formation of the 1CT state. Interestingly, the spin-orbit coupling (SOC) with two other 3LE states is negligible because they are localized on different donors and not involved in 1CT. We consider this as an example of an additional "localization" criterion that completes the well-known El Sayed rule on the different nature of states for nonzero SOC. The applicative potential of such a hexabromo emitter is tested in a "hyperfluorescent" system containing a red fluorescent dopant (tetraphenyldibenzoperiflanthene, DBP) as an acceptor of Förster resonance energy transfer, affording a narrow-band red-emitting system, with most of the emission in the submicrosecond domain. In fact, the fabricated red OLED devices show remarkable improvement of efficiency roll-off from 2-4 times depending on the luminance, mostly because of the increase of the rISC constant rate and the decrease of the overall delayed fluorescence lifetime thanks to the HA effect.

Type‐I‐Organic‐Photosensitizer‐Functionalized Upconversion Nanoparticles for Enhanced Photodynamic Therapy

AbstractPhotodynamic therapy (PDT) has achieved great progress in cancer treatment because it generates reactive oxygen species (ROS) in a noninvasive manner. Nonetheless, the majority of light‐sensitive photosensitizers (PSs) are only sensitive to UV or visible light, suffering limitations such as phototoxicity (UV) and low tissue penetration capabilities (UV–visible). What is more, another impact factor, namely the hypoxic environment within a tumor always inhibits the production of ROS for treatment efficacy. To overcome these problems, herein, one new type‐I PS containing selenium (Se6) is designed. Benefiting from the dual heavy atom effects of selenium and bromine, Se6 can produce short‐lived hydroxyl (•OH) and long‐lived superoxide anion (O2•−) under both normoxic and hypoxic conditions, which is superior to commonly used oxygen‐dependent type‐II PSs, such as chlorine e6, zinc phthalocyanine. Combining Se6 and upconversion nanoparticles with the ability to upconvert near‐infrared (NIR) light to UV–visible light can greatly overcome the tissue penetration depth, phototoxicity, and oxygen‐dependent limitation of the PDT process, which demonstrates a significant performance in vivo to achieve better therapy efficiency.

Chalcogen Atom-Modulated Croconaine for Efficient NIR-II Photothermal Theranostics.

Organic dye-based agents with near-infrared (NIR)-II absorption have great potential for cancer theranostics because of the deeper tissue penetration and good biocompatibility. However, proper design is required to develop NIR-II-absorbing dyes with good optical properties. We proposed to construct chalcogen atom-modulated croconaine for NIR-II light-triggered photothermal theranostics. By introducing different chalcogen atoms (O, S, Se, or Te) into the structure of croconaine, the light absorption of croconaine can be precisely regulated from the NIR-I to the NIR-II range due to the heavy-atom effect. Especially, Te-substituted croconaine (CRTe) and its nanoformulations exhibit superior NIR-II responsiveness, a high photothermal conversion efficiency (70.6%), and good photostability. With their favorable tumor accumulation, CRTe-NPs from tumor regions can be visualized by NIR-II optoacoustic systems with high resolution and high contrast; meanwhile, their superior photothermal performance also contributes to efficient cell killing and tumor elimination upon 1064 nm laser irradiation. Therefore, this work provides an efficient strategy for the molecular design of NIR-II organic photothermal agents.

Metal-conjugated Maltotriose Chlorins as Novel Photosensitizers for Photodynamic Therapy.

Photodynamic therapy (PDT) is a relatively non-invasive anti-cancer therapy that employs a photosensitizer with a specific wavelength of light, causing a photochemical reaction that releases free radicals, thereby inducing tumor cell necrosis via oxidative stress. The oxygen molecule reaches the singlet excited state through efficient energy transfer from an excited triplet state of the photosensitizer. Heavy atoms are frequently introduced in photosensitizers for efficiently generating reactive oxygen species (ROS) in PDT, known as the heavy atom effect. However, metal-complexed photosensitizers often show low water-solubility. To overcome this limitation and produce ROS effectively, we focused on the better solubility of photosensitizers with heavy metals bound within the chlorin skeleton and conjugated with glucose in this study. We established maltotriose (Mal3)-conjugation with heavy metallochlorins [M (Mal3-chlorin), M=Pt or Pd)] and evaluated its anti-tumor effect. M (Mal3-chlorin) showed effective ROS production and singlet oxygen induction. Consequently, these cytotoxic factors caused effective anti-tumor effects and induced morphological changes, followed by cell death in vitro. In a xenograft tumor mouse model, PDT with M (Mal3-chlorin) showed tumor growth suppression. M (Mal3-Chlorin) might be an excellent glucose-conjugated chlorin because of its strong anti-tumor PDT effect.

Direct Population of Triplet States for Efficient Organic Afterglow through the Intra/Intermolecular Heavy-Atom Effect.

Organic afterglow is a fascinating phenomenon with exceptional applications. However, it encounters challenges such as low intensity and efficiency, and typically requires UV-light excitation and facile intersystem crossing (ISC) due to its spin-forbidden nature. Here, we develop a novel strategy that bypasses the conventional ISC pathway by promoting singlet-triplet transition through the synergistic effects of the intra/intermolecular heavy-atom effect in aromatic crystals, enabling the direct population of triplet excited states from the ground state. The resulting materials exhibit a bright organic afterglow with a remarkably enhanced quantum efficiency of up to 5.81%, and a significantly increased organic afterglow lifetime of up to 157 microseconds under visible light. Moreover, given the high-efficiency visible-light excitable organic afterglow emission, the potential application is demonstrated in lifetime-resolved, color-encoded, and excitation wavelength-dependent pattern encryption. This work demonstrates the importance of the direct population method in enhancing the organic afterglow performance and red-shifting the excitation wavelength, and provides crucial insights for advancing organic optoelectronic technologies that involve triplet states.

Enhancing Reverse Intersystem Crossing in Triptycene-TADF Emitters: Theoretical Insights into Reorganization Energy and Heavy Atom Effects.

Thermally activated delayed fluorescence (TADF) emitters based on the triptycene skeleton demonstrate exceptional performance, superior stability, and low efficiency roll-off. Understanding the interplay between the luminescent properties of triptycene-TADF molecules and their assembly environments, along with their excited-state characteristics, necessitates a comprehensive theoretical exploration. Herein, we predict the photophysical properties of triptycene-TADF molecules in a thin film environment using the quantum mechanics/molecular mechanics method and quantify their substantial dependency on the heavy atom effects and reorganization energies using the Marcus-Levich theory. Our calculated photophysical properties for two recently reported molecules closely align with experimental values. We design three novel triptycene-TADF molecules by incorporating chalcogen elements (O, S, and Se) to modify the acceptor units. These newly designed molecules exhibit reduced reorganization energies and enhanced reverse intersystem crossing (RISC) rates. The heavy atom effect amplifies spin-orbit coupling, thereby facilitating the RISC process, particularly at a remarkably high rate of ∼109 s-1.

Role of Halobenzene Guest Molecules in Modulating Room Temperature Phosphorescence of Benzophenone-Naphthalene Diimide Inclusion Crystals.

Materials exhibiting room temperature phosphorescence (RTP) have recently emerged as a subject of significant interest. In this study, we successfully created inclusion crystals by introducing halobenzenes as guests into a host molecule combining benzophenone with naphthalene diimide. This approach led to the creation of fascinating fluorescence and RTP properties dependent on the guest molecules. Notably, crystals containing chlorobenzene showed cyan fluorescence, while those with iodobenzene displayed red RTP. This difference highlights the impact of the guest molecule on the luminescent properties, with the significant external heavy-atom effect of iodobenzene playing a key role in promoting efficient intersystem crossing between the excited singlet and triplet states. Crystals with bromobenzene exhibited a unique blend of fluorescence and RTP, both from benzophenone and naphthalene diimide, highlighting the moderate heavy-atom effect. These findings reveal composite materials with remarkably diverse and interesting optical characteristics.

Structure and Photophysics of N-Tolanyl-phenochalcogenazines and their Radical Cations.

The study focuses on the structural and photophysical characteristics of neutral and oxidized forms of N-tolanyl-phenochalcogenazines PZX-tolan with X=O, S, Se, and Te. X-ray crystal structure analyses show a pseudo-equatorial (pe) structure of the tolan substituent in the O, S, and Se dyads, while the Te dyad possesses a pseudo-axial (pa) structure. DFT calculations suggest the pe structure for O and S, and the pa structure for Se and Te as stable forms. Steady-state and femtosecond-time resolved optical spectroscopy in toluene solution indicate that the O and S dyads emit from a CT state, whereas the Se and Te dyads emit from a tolan-localized state. The T1 state is tolan-localized in all cases, showing phosphorescence at 77 K. The heavy atom effect of chalcogens induces intersystem crossing from S1 to Tx, resulting in a decreasing S1 lifetime from 2.1 ns to 0.42 ps. The T1 states possess potential for singlet oxygen sensitization with a high quantum yield (ca. 40 %) for the O, S, and Se dyads. Radical cations exhibit spin density primarily localized at the heterocycle. EPR measurements and quasirelativistic DFT calculations reveal a very strong g-tensor anisotropy, supporting the pe structure for the S and Se derivatives.

Incorporation of deuterated coronene into cage-like sodalite-type porous organic salts and improvement of room-temperature phosphorescence properties

Abstract Host materials with external heavy atom effects do not change the chemical structures of incorporated luminescent molecules but promote intersystem crossing from the excited singlet state to the excited triplet state, which induces room-temperature phosphorescence (RTP). The deuteration of luminescent molecules suppresses non-radiative deactivation via C–H stretching vibration; therefore, the improvement of both phosphorescence lifetime and quantum efficiency (i.e. isotope effect) is expected. Although a combination of the external heavy atom effect and isotope effect could be expected to improve phosphorescent performances dramatically, an environment with a strong external heavy atom effect (density of iodine atoms ≥0.65 gcm−3) increases non-radiative deactivation via spin-orbit coupling; therefore, the isotope effect is hindered, and the phosphorescent lifetime and quantum efficiency are not usually improved. In the current work, we constructed cage-like sodalite-type porous organic salts (s-POSs) where the density of iodine atoms (0.55 gcm−3) was moderate (0.13 ̶ 0.65 gcm−3). Incorporation of a deuterated representative luminescent molecule such as coronene (coronene-d12) into s-POSs enabled the exerting of both the external heavy atom effect and isotope effect, which successfully improved both RTP lifetime (1.1 times) and quantum efficiency (1.6 times) over those of an incorporated ordinary coronene (coronene-h12).

Switching from Thermally Activated Delayed Fluorescence in Single Crystals for Low-Threshold Laser to Room-temperature Phosphorescence in Amorphous-Film for Highly Efficient OLEDs.

Metal-organic phosphorescent complexes containing Ir or Pt are work horse in organic light-emitting diode (OLED) technology, which can harvest both singlet and triplet excitons in electroluminescence (EL) owing to strong heavy-atom effect. Recently, organic room-temperature phosphorescence (ORTP) have achieved high photoluminescence quantum yield (PLQY) in rigid crystalline state, which, however, is unsuitable for OLED fabrication, therefore leading to an EL efficiency far low behind those of metal-organic phosphorescent complexes. Here, we reported a luminescence mechanism switch from thermally activated delayed fluorescence (TADF) in single crystal microwires to ORTP in amorphous thin-films, based on a tert-butylcarbazole difluoroboron β-diketonate derivative of DtCzBF2. Tightly packed and well-faceted single-crystal microwires exhibit aggregation induced emission (AIE), enabling TADF microlasers at 473 nm with an optical gain coefficient as high as 852 cm-1 . In contrast, loosely packed dimers of DtCzBF2 formed in guest-host amorphous thin-films decrease the oscillator strength of fluorescence transition but stabilize triplets for ORTP with a PLQY up to 61 %, leading to solution-processed OLEDs with EQE approaching 20 %. This study opens possibilities of low-cost ORTP emitters for high performance OLEDs and future low-threshold electrically injected organic semiconductor lasers (OSLs).

Introducing Iodide Ligands on IrAu12 Cluster Enhances Phosphorescence Efficiency and Photoredox Activity

AbstractThe effects of halide ligands on the photoluminescence (PL) and photoredox properties were examined on [IrAu12(dppe)5X2]+ (1X; X=Cl, Br, I; dppe=1,2‐bis(diphenylphosphino)ethane). The PL quantum yield was enhanced in the order of 1Cl (67 %)<1Br (75 %)<1I (77 %). The lifetime of the photoexcited state was shortened in the order of 1Cl>1Br>1I due to the acceleration of radiative relaxation by the heavy atom effect in 1I. Despite the shortest PL lifetime, cluster 1I exhibited the highest conversion in the photocatalytic [2+2] cycloaddition of bisenone. The PL from 1Cl and 1Br was quenched by adding Lewis acid Li+, required for activation of bisenone, whereas that from 1I remained unaffected. Theoretical calculations showed that the Au−Cl and Au−Br bonds of 1Cl and 1Br were weakened by interaction with Li+, while the Au−I bond of 1I was not. Clusters 1Cl and 1Br underwent halide exchange with isocyanide in the presence of Li+, whereas 1I did not. These results suggested that the photoredox activity of 1Cl and 1Br was suppressed by the Li+‐induced nonradiative quenching of the photoexcited state. This study highlights the unexpected importance of halide ligands in the design of efficient cluster photocatalysts.

An AIEgen and Iodine Double-Ornamented Platinum(II) Complex for Bimodal Imaging-Guided Chemo-Photodynamic Combination Therapy.

Real-time biodistribution monitoring and enhancing the therapeutic efficacy of platinum(II)-based anticancer drugs are urgently required to elevate their clinical performance. Herein, a tetraphenylethene derivative (TP) with aggregation-induced emission (AIE) properties and an iodine atom are selected as ligands to endow platinum (II) complex TP-Pt-I with real-time in vivo self-tracking ability by fluorescence (FL) and computerized tomography (CT) imaging, and improved anticancer efficacy by the combination of chemotherapy and photodynamic therapy. Especially, benefiting from the formation of a donor-acceptor-donor structure between the AIE photosensitizer TP and Pt-I moiety, the heavy atom effects of Pt and I, and the presence of I, TP-Pt-I displayed red-shifted absorption and emission wavelengths, enhanced ROS generation efficiency, and improved CT imaging capacity compared with the pristine TP and the control agent TP-Pt-Cl. As a result, the enhanced intratumoral accumulation of TP-Pt-I loaded nanoparticles is readily revealed by dual-modal FL and CT imaging with high contrast. Meanwhile, the TP-Pt-I nanoparticles show significantly improved tumor growth-inhibiting effects on an MCF-7 xenograft murine model by combining the chemotherapeutic effects of platinum(II) and the photodynamic effects of TP. This self-tracking therapeutic complex thus provides a new strategy for improving the therapeutic outcomes of platinum(II)-based anticancer drugs.

Porphyrin-Polyoxotungstate Molecular Hybrid as a Highly Efficient, Durable, Visible-Light-Responsive Photocatalyst for Aerobic Oxidation Reactions.

Organic-polyoxometalate (POM) hybrids have recently attracted considerable interest because of their distinctive properties and wide-ranging applications. For the construction of organic-POM hybrids, porphyrins are promising building units owing to their optical properties and reactivity, including strong visible-light absorption and subsequent singlet-oxygen (1O2*) generation. However, the practical utilization of porphyrins as photocatalysts and photosensitizers is often hindered by their own degradation by 1O2*. Therefore, there is a substantial demand for the development of porphyrin-derived photocatalysts with both high efficiency and durability. Herein, we present a porphyrin-polyoxotungstate molecular hybrid featuring a face-to-face stacked porphyrin dimer (I) fastened by four lacunary polyoxotungstates. Hybrid I exhibited remarkable efficiency and durability in photocatalytic aerobic oxidation reactions, and the selective oxidation of various dienes, alkenes, sulfides, and amines proceeded using just 0.003 mol % of the catalyst. Mechanistic investigations suggested that the high activity of I stems from the efficient generation of 1O2*, resulting from the heavy-atom effect of POMs. Furthermore, despite its high efficiency in 1O2* generation compared to free porphyrins, I exhibited superior durability against 1O2*-induced degradation under photoirradiation.

Heavy Atom Effect in Halogenated mCP and Its Influence on the Efficiency of the Thermally Activated Delayed Fluorescence of Dopant Molecules.

In this study, we explore the impact of halogen functionalization on the photophysical properties of the commonly used organic light-emitting diode (OLED) host material, 1,3-bis(N-carbazolyl)benzene (mCP). Derivatives with different numbers and types of halogen substituents on mCP were synthesized. By measuring steady-state and transient photoluminescence at 6 K, we study the impact of the type, number, and position of the halogens on the intersystem crossing and phosphorescence rates of the compounds. In particular, the functionalization of mCP with 5 bromine atoms results in a significant increase of the intersystem crossing rate by a factor of 300 to a value of (1.5 ± 0.1) × 1010 s-1, and the phosphorescence rate increases by 2 orders of magnitude. We find that the singlet radiative decay rate is not significantly modified in any of the studied compounds. In the second part of the paper, we describe the influence of these compounds on the reverse intersystem crossing of the 7,10-bis(4-(diphenylamino)phenyl)-2,3-dicyanopyrazino-phenanthrene (TPA-DCPP), a TADF guest, via the external heavy atom effect. Their use results in an increase of the reverse intersystem crossing (RISC) rate from (8.1 ± 0.8) × 103 s-1 for mCP to (2.7 ± 0.1) × 104 s-1 for mCP with 5 bromine atoms. The effect is even more pronounced for the mCP analogue containing a single iodine atom, which gives a RISC rate of (3.3 ± 0.1) × 104 s-1. Time-dependent DFT calculations reveal the importance of the use of long-range corrected functionals to predict the effect of halogenation on the optical properties of the mCP, and the relativistic approximation (ZORA) is used to provide insight into the strength of the spin-orbit coupling matrix element between the lowest-lying excited singlet and triplet states in the different mCP compounds.