Effect Of Coagulation Research Articles

Effect of cheese coagulants on American-style natural cheese proteolysis and functional characteristics of process cheese made therefrom

Recombinant bovine chymosin (RBC) is an enzyme routinely used in cheese manufacture. Recombinant camel chymosin (RCC) is a milk coagulant with higher clotting activity and less proteolytic activity for natural cheese manufacture. This study aimed to determine the effect of RCC and RBC on the proteolysis of natural cheese and the functionality of processed cheese (PC). Six American-style natural cheeses were manufactured utilizing two different chymosin treatments and used to produce PC at 1 month of ripening. The natural cheese made using RCC had a significantly (P < 0.05) lower level of primary proteolysis and a lower degree of hydrolysis of αS1-CN and β-CN. The RCC treatment's hot viscosity, hardness, and loss tangent were significantly (P < 0.05) higher than the RBC in the PC. These results demonstrate that RCC results in a reduced level of primary proteolysis in a natural cheese, and when utilized in PC, it increases firmness and decreases meltability.

Integration of Coagulation–flocculation(with Natural Coagulant) to Constructed Wetlands for Color Removal from Tequila Vinasses

The aim of this study was to evaluate a natural coagulant, Moringa oleifera seeds (MOC), to reduce the color concentration in treated tequila vinasses (TVs). TV-A was the effluent of horizontal subsurface flow wetlands (HSSFW); TV-B was the effluent of vertical up-flow wetlands (VUFW); and TV-C was the effluent of vertical down-flow constructed wetlands (VDFW). Raw TVs were also with MOC. Jar tests were performed to find the optimal dose and pH value for apparent color (AC) removal. With the optimal dose and pH for each type of TV, tests were performed in triplicate to evaluate the removal of apparent color (AC), true color (TC), turbidity, total suspended solids (TSS), chemical oxygen demand (COD), and electrical conductivity (EC). For TV-A and TV-B, the optimal values were 1 g/L of MOC and pH 8, and the removals were 52%, 43%, 50% and 72% of AC, turbidity, TC, and TSS, respectively. For TV-C, the optimal values were 2.5 g/L and pH 5, with removals of 66%, 73%, and 98% for AC, TC, and TSS, respectively. For TV-D, the MOC had no coagulant effect in any of the experimental conditions evaluated, probably due to the high concentration of turbidity and TSS in the raw vinasses, which prevented the interaction between MOC and melanoidins. Deeper studies are required to understand and evaluate those factors that influence MOC efficiency so that the coagulation–flocculation process can be optimized.

Effects of Dust Coagulation on Streaming Instability

Streaming instability (SI) in dust has long been thought to be a promising process in triggering planetesimal formation in the protoplanetary disks (PPDs). In this study, we present the first numerical investigation that models the SI in the vertically stratified disk together with the dust coagulation process. Our simulations reveal that, even with the initially small dust sizes, because dust coagulation promotes dust size growth, SI can eventually still be triggered. Specifically, dust coagulation, limited only by dust fragmentation, broadens the parameter boundaries obtained from previous SI studies using single dust species. We describe the various stages of dust dynamics along with their size evolution and explore the impact of different dust fragmentation velocities. Implications of these results for realistic PPDs are also discussed.

Mitigating pollutants in textile dye wastewater with Aloe vera (L.) Burm. f. and Abelmoschus esculentus (L.) Moench: A study on treatment efficacy

Textile wastewater, particularly those containing dyes, presents significant threats to environmental quality and human health. This study assessed the efficacy of Aloe vera (L.) Burm. f. and Abelmoschus esculentus (L.) Moench (Okra) in removing pollutants from textile dye effluent collected in Dindigul, Tamil Nadu. The effluent samples were treated with varying doses of phyto-coagulants (0.02g, 0.04g, 0.06g, 0.08g, 0.10g, and 0.12g), as well as isolated polysaccharides from Aloe vera and Okra, to identify optimal strategies for reducing color, Total Dissolved Solids (TDS), and Chemical Oxygen Demand (COD). The findings revealed that the phyto-coagulants, particularly Okra polysaccharides, significantly reduced pollution levels, achieving a 90% reduction in color, 96% reduction in TDS, and 82% reduction in COD. To further understand the mechanism of pollutant removal, GC-MS, FTIR, and Zeta potential analyses were conducted. This study highlights the effectiveness of natural coagulants in mitigating environmental pollution and preventing the entry of harmful chemical contaminants into the food chain. The study supports the potential of Aloe vera and Okra as sustainable and eco-friendly solutions for addressing the environmental challenges posed by textile wastewater pollution.

Identification of conditions for ultrasonic effect on gas-dispersed medium and creation of radiators to increase the efficiency of coagulation in devices with swirling flow

Relevance. The presence and uncontrolled distribution of aerosols of various substances in the air, which have a negative impact on humans, flora and fauna. This problem is especially acute in the extraction, processing and combustion of georesources. The most effective way to solve the problem is the use of high-intensity ultrasonic vibrations, the effect of which on aerosols causes convergence and agglomeration of small particles into large ones. However, at low concentrations, the particle coagulation efficiency is not sufficient to increase the recovery rate of gas treatment equipment. Therefore, there is a need to find new ways to optimize ultrasonic equipment for coagulation of fine particles in order to increase its efficiency. Aim. To determine the optimal conditions for ultrasonic influence on a swirling gas-dispersed flow, ensuring maximum efficiency of agglomeration of highly dispersed particles. Carrying out comparative studies of coagulation of particles when exposed to ultrasonic fields generated by different types of radiators and their combined effects will make it possible to determine the effectiveness of ultrasonic coagulation and the optimal design scheme of ultrasonic exposure. Objects. Coagulation of particles under ultrasonic impact, formed by various types of radiators. Methods. Computer modeling of the generated ultrasonic field using the finite element method using harmonic acoustic analysis. Finite element modeling and design of disk radiators using modal analysis. To determine the characteristics of the aerosol, a Malvern Spraytec Particle Analyzer was used. Results. The results of calculations and experiments have shown that the use of an extended ultrasonic tubular radiator operating on a bending-diametric mode of vibration and forming a ring standing wave with a sound pressure level of 162–165 dB as the main source of ultrasonic impact for devices with swirling flows may be the most energy efficient. Further increase in the efficiency of coagulation can only be achieved by the combined action of a tubular radiator and a longitudinally oscillating radiator. This significantly modifies the field structure and provides not only an increase in the sound pressure level (up to 167 dB), but also in the number of formed nodal surfaces (up to 44).

Factor X consumption attenuates the coagulation effect of emicizumab: a case of severe hemophilia A treated with emicizumab and factor VIII-bypassing agents.

In patients with hemophilia A with inhibitor (PwHA-I), emicizumab drastically reduces bleeding events. However, few studies have investigated the behavior and effects of factor X (FX) in patients who require intensive treatment with factor VIII-bypassing agents (BPA) and emicizumab. A 59-year-old man with HA-I receiving emicizumab prophylaxis was admitted to our hospital because of acute gangrenous cholecystitis. He received percutaneous transhepatic gallbladder drainage and laparoscopic cholecystectomy along with repeated administration of recombinant activated factor VII (rFVIIa). On day 10, a large hematoma developed around the residual gallbladder. Rotational thromboelastometry (ROTEM) suggested poor effect of rFVIIa and reduced activity of emicizumab. Considering that this could be due to consumption of FX, plasma-derived FVIIa/FX agent (pdFVIIa/X) was administered, and ROTEM parameters recovered considerably. The patient was discharged on day 19 uneventfully. Plasma assays revealed that FX antigen level (FX:Ag) was 107.5% at baseline but then decreased. Administration of pdFVIIa/FX restored FX:Ag (pre/post 47.2%/125.5%). ROTEM and thrombin generation assay with in vitro addition of anti-emicizumab antibody suggested that low FX:Ag was responsible for attenuating the effect of emicizumab, and pdFVIIa/FX administration restored coagulation potentials. In PwHA-I receiving intensive treatment with rFVIIa under emicizumab prophylaxis, FX consumption might attenuate the effect of emicizumab.

Constructing a visual detection method for coagulation effect based on image feature machine learning

The coagulation process is influenced by several factors, including turbidity, temperature, pH, and hydraulic conditions. Consequently, optimizing the dosage of coagulants is often time-consuming and challenging. To quickly evaluate coagulation efficacy and optimize coagulant dosage, this study utilized a convolutional neural network (CNN) model to analyze the accuracy of effluent turbidity predictions from floc images at different time intervals. Python OpenCV was employed to develop a program that extracts macro features (e.g., texture) and micro features (e.g., particle size distribution) from the images, and these feature parameters were analyzed using a BP-ANN model. The results of the CNN analysis indicated that the middle to late stages of flocculation are the optimal periods for predicting effluent turbidity, with the highest prediction accuracy of 99.81 % achieved during the middle stage of flocculation. The BP-ANN analysis demonstrated that particle size distribution effectively represents the microscopic characteristics of flocs, achieving a maximum prediction accuracy of 96.94 % in the middle stage of flocculation. Furthermore, combining macroscopic and microscopic features yielded a prediction accuracy of 99.44 % at the end of flocculation using BP-ANN. These findings suggest that machine learning techniques applied to floc images can effectively predict effluent turbidity, offering valuable insights for future water quality prediction and the development of flocculation kinetics models.

The Influence of Aloe Vera Biocoagulant and Mixing Time in Reducing Biological Oxygen Demand, Chemical Oxygen Demand and Total Suspended Solids Levels

Aloe vera is a plant with complex composition of carbohydrates, sugars, and mucilage, enabling it to bind particles in water and serve as a coagulant in the coagulation-flocculation process. This study aims to assess the impact of varying doses and rapid stirring times on the reduction of biochemical oxygen demand (BOD), chemical oxygen demand (COD), and total suspended solids (TSS) levels in liquid waste from pharmaceutical companies. The research involves two factors: (1) aloe vera concentration at three levels (20 mL/L, 40 mL/L, and 60 mL/L); (2) fast mixing time at three levels (20 minutes, 40 minutes, and 60 minutes), with each treatment repeated thrice. Levels of BOD, COD and TSS were measured post-treatment using a jar test tool. The results of the analysis showed that the optimal efficacy of the aloe vera coagulant occurred at a concentration of 40 mL/L for 40 minutes. At this optimal condition, the effectiveness of the aloe vera coagulant in reducing BOD, COD and TSS levels was 72.3%, 78.5%, and 65.3%, respectively. This indicates that the aloe vera coagulant can be effectively utilized in the treatment of pharmaceutical industrial wastewater to reduce BOD, COD and TSS levels

Study of Leachate Characteristics and Effectiveness of Chemical Coagulation and Electro-Oxidation for Leachate Landfill Pre-Treatment

Study of Leachate Characteristics and Effectiveness of Chemical Coagulation and Electro-Oxidation for Leachate Landfill Pre-Treatment

Constructing a visual detection model for floc settling velocity using machine learning

Optimizing the dosage of coagulant is a time-consuming process, and real-time evaluation of floc settling velocity can quickly predict the coagulation effect and optimize the dosage. This study used a convolutional neural network (CNN) model to analyze the accuracy of floc image recognition of settling velocity. Python-OpenCV was employed to develop a program that segments individual flocs and detects their settling velocity to constructing a dataset of floc images and settling velocity. The results showed that the accuracy of determining the settling velocity of flocs solely based on their particle size was 88%, indicating that the floc structure is complex and a single parameter is not sufficient to accurately identify settling velocity. The results of the CNN analysis indicated that using a relatively simple Lenet5 structure can quickly achieve an accuracy of 88%, while using a Resnet18 structure can achieve recognition accuracy of over 90%. These findings suggest that machine learning techniques applied to floc images can effectively evaluate floc settling velocity, providing theoretical guidance for optimizing coagulant dosage and regulating coagulation processes.

Impact of Hydroxy-Aluminum and Extracellular polymeric substances interactions on waste activated sludge Dewatering: A molecular perspective

Al13 and Al30 are the dominant aluminum (Al) species in polyaluminium chloride commonly used for sludge dewatering. However, the presence of extracellular polymeric substances (EPS) in the waste activated sludge hinders the coagulation effectiveness of Al-based coagulants. This study focused on the effects and mechanisms of Al13 and Al30 on treating sludge EPS. From a bulk perspective, the dosing of two coagulants significantly reduced the dissolved organic carbon and various organic compounds, reflecting their efficacy in removing organic substances in EPS. Further molecular characterization was revealed by FT-ICR MS. Al13 was more effective in removing lipids, lignins, and sulfur-containing compounds compared to Al30. Al13 also demonstrated a pronounced removal in components enriched in oxygen atoms (10–20) and KMD(COO) (0.5–0.7), suggesting its ability to remove molecules across a broader range of unsaturation. After coagulation with Al13, the areas corresponding to Al2p1/2 and Al2p2/3 in the Al2p spectra were more prominent compared to those in the Al30-coagulated EPS. Therefore, Al13 can both remove complex and low molecule weight compounds through abound forms of adsorption sites, making it more efficient in releasing bound water compared to Al30.

In-depth analysis of natural organic matter fractions in drinking water treatment performance: Fate and role of humic substances in trihalomethanes formation potential

In this study we investigate the compositional changes in dissolved organic matter (DOM) fractions across diverse water sources and treatment processes in three Drinking Water Treatment Plants (DWTPs). High-Performance Size Exclusion Chromatography coupled with Diode Array Detection and Organic Carbon Detection (HPSEC-DAD-OCD) was employed to characterize DOM fractions, offering insights into treatment optimization. We examine bulk water parameters, DOM distributions, and the efficiency of treatment trains in reducing DOM fractions. Results reveal distinct DOM composition profiles in river-sourced versus reservoir-sourced waters, with implications for treatment processes. Coagulation, Granular Activated Carbon (GAC) adsorption, Electrodialysis Reversal (EDR), and Ion Exchange (IEX) were evaluated for their efficacy in removing DOM fractions. The analysis highlights the effectiveness of coagulation in reducing high molecular weight (MW) fractions, while GAC filtration targets lower MW fractions. EDR shows significant removal of anions and aromatics, while IEX demonstrates high removal efficiencies for removing humic substances (HS) fractions. Spectroscopic analysis further elucidates changes HS sub-fractions and their role in disinfection by-products (DBP) formation. To quantitatively assess the relationship between HS sub-fractions and trihalomethane formation potentials (THMFP), Pearson correlation analysis were conducted, unveiling robust associations between HS sub-fractions and THM-FP that can be predicted by surrogate parameters such as A254.

Treatment of sludge hydrothermal carbonization wastewater by ferrous/sodium percarbonate system: Effect of wastewater composition and role of coagulation and oxidation

It is crucial to explore the effect of complex wastewater compositions on the ferrous/sodium percarbonate (Fe(Ⅱ)/SPC) system and the role of oxidation-coagulation in designing water treatment processes. This study employed redundancy analysis to investigate the effects of wastewater constituents on oxidation and coagulation. Raman analysis, X-ray Photoelectron Spectroscopy, and Fourier Transform Ion Cyclotron Resonance Mass Spectrometry were used to determine the roles of oxidation and coagulation in the system. The results showed that sulfates and phosphates formed amorphous complexes with iron species via coprecipitation, thereby promoting coagulation to remove organics. Some heavy metals can also be removed by coagulation. The co-activation of SPC by pre-existing transition metals and the added Fe(Ⅱ) facilitated the oxidative removal of organics, while chloride and arsenic were the main inhibitory inorganic substances in the system. Aromatic compounds mainly promoted coagulation, polysaccharides promoted oxidation, humic acid promoted oxidation and coagulation, and C=C/C=O inhibited the Fe(Ⅱ)/SPC system. The oxidation process removed graphitic structures and unsaturated organic matter in the region of (O/C, H/C) = (0.2–0.4, 0.9–2.0) through free radicals and generated amorphous carbon structures and saturated organic matter in the region of (O/C, H/C) = (0.3–0.7, 1.2–1.9). The coagulation process removed aromatic organics with 2–5 rings and unsaturated organics in the region of (O/C, H/C) = (0.2–0.6, 0.7–1.6) with oxygen-containing organics. The combined effects of coagulation and oxidation enhanced the removal efficiency of organic carbon by approximately 40%. This study facilitates the optimization of hydrothermal carbonization wastewater treatment and advanced oxidation processes.

Effects of Organic Acid Coagulants on the Textural and Physical–Chemical Properties of Tofu

Tofu is obtained by heating soymilk, to which a coagulant, such as calcium sulfate or magnesium chloride, is added to make it curdle. This study aimed to parameterize the effects of the following three alternative organic coagulant types: apple, rice, and white vinegars, used in different proportions. Six treatments were established with three concentrations (1%, 3%, and 5%), evaluating the coagulation time and curd yield. The treatments with the lowest coagulation time were analyzed for texture by TPA, color through the CIEL*a*b scale, protein content, and moisture. The results showed that the rice vinegar + 3% white vinegar (T6C3) treatment showed the lowest coagulation time (0.78 min). The 5% apple vinegar (T1C5) treatment provided the highest curd yield, averaging 23.73%. This treatment’s protein and moisture contents were 3.93% protein and 69.73% moisture, confirming that better texture characteristics are recorded in tofu at lower pH values. The TPA results showed that using apple and rice vinegars as coagulants provided a challenging, less cohesive, more adhesive, and less elastic tofu. White vinegar provided a soft, more cohesive, less adhesive, and more elastic tofu. In the color analysis, it was observed that tofu coagulated with apple vinegar showed a tendency toward a yellow color, and tofu coagulated with rice and white vinegars showed a tendency toward a white color. These findings parameterize the effects of using each type of vinegar as a coagulant. These organic coagulants provide faster coagulation times and desirable texture characteristics, thus offering a practical alternative to traditional coagulants in tofu manufacturing.

Turbidity Removal from Sullage Wastewater Using Musa paradisiaca Peels as a Natural Coagulant

The use of inorganic commercial coagulants for water and wastewater clarification has been linked to the prevalence of human health and environmental issues. Natural coagulants are currently being explored as an alternative option for replacing synthetic coagulants. This present study, examines the use of Musa paradisiaca peels as a natural based coagulant for turbidity reduction in sullage wastewater. Musa paradisiaca peels, alum and blended were used in the study as coagulants for sullage wastewater clarification. The blended coagulant was prepared by combining the Alum and Musa paradisiaca peel powder in a ratio of 1:1. The sullage wastewater used in the study had an initial concentration of 151.8 NTU and was sourced within the University premises. The batch experimental procedure to examine the effectiveness of the natural coagulant was used. The study results show that the highest turbidity removal was for alum, blended, and coagulant, from 151.8 to 1.1 NTU, 151.8 to 14.43 NTU, and 151.8 to 29.32 NTU respectively. The maximum results for the effect of contact time on the rate of turbidity removal were attained at 6 h for all coagulants. The effect of natural coagulant performance on pH medium has indicated that it favours the acidic solution. The results obtained in this study recommend the efficiency and value of Musa paradisiaca peels as coagulant. The use of Musa paradisiaca peels as a natural coagulant offers a sustainable and cost-effective solution for the treatment of sullage wastewater. The use of Musa paradisiaca as a natural coagulant provides an alternative solution for replacing synthetic coagulants and overcomes health challenges associated with its usage, offers water treatment at low cost and reduces environmental issues associated with agri-food waste disposal, thereby promoting sustainable waste management.

Carbon capture characteristics and mechanisms of municipal wastewater treatment using coagulation-enhanced HRCS system

This study optimized coagulation in HRCS systems for municipal wastewater treatment, investigating coagulant dosage effects on carbon capture and microbial communities. Real wastewater testing in coagulation-enhanced HRCS (CE-HRCS) systems further revealed carbon capture efficiency and microbial mechanisms, enhancing resource utilization. The results demonstrated that with a coagulant dosage of 20 mg/L, the combined proportion of Proteobacteria and Bacteroidetes, the pivotal bacteria for carbon capture, exceeded 90 %. This dosage achieved a maximum sludge extracellular polymeric substance (EPS) content of 150 mg/g VSS and a carbon capture efficiency of 83 %. Upon transitioning to real municipal wastewater, while the chemical oxygen demand (COD) removal rate slightly dipped to approximately 80 %, the carbon capture rate remained robust at 63 ± 2 %, down from 70 %. The EPS content stabilized at 138 ± 2 mg/g VSS, indicating a satisfactory carbon capture efficiency for practical municipal wastewater treatment. Moreover, the microbial population in the CE-HRCS system exhibited an increase in species richness and diversity. Although the proportion of Proteobacteria declined from 83 % to 62 %, the presence of Firmicutes and Bacteroidota increased, with carbon degradation-related functional bacteria continuing to dominate. This study offers valuable insights and new guidance for enhancing carbon capture from municipal wastewater using CE-HRCS technology.

Application of batch electrocoagulation treatment system with aluminium electrodes for simultaneous removal of organic and heavy metal contaminants from Borneo urban rivers

The challenges of sludge management and complex water treatment systems hinder the effectiveness of chemical coagulation in treating heavily contaminated urban river water. Realizing these issues, this study aims to develop a batch electrocoagulation system using aluminum electrodes to generate in-situ aluminum hydroxide coagulants for simultaneous removal of organic contaminants and heavy metals from Borneo urban river water. Subsequent, the treatment system achieves a reduction of 91.67 % of turbidity, 98.29 % of color, 95.16 % of total suspended solids (TSS), 97.78 % of iron, 94.21 % of lead, 21.94 % of pH, and 98.58 % of chemical oxygen demand (COD) with an electric current of 5 A and a residence time of 25 min. Besides, the treated water meets the Malaysia National Water Quality Standards for Class I which making it suitable for domestic consumption. The energy consumption cost for the treatment is only RM 1.48 (USD 0.31) per cubic meter of treated water. Additionally, the analysis of the electrocoagulation flocs reveals the presence of carbon, iron, lead, and various dissolved minerals which indicates effective contaminant removal from urban river. Overall, this study demonstrates the potential of the batch electrocoagulation treatment system as an effective and cost-efficient solution for treating urban river water in Borneo industrial areas.

Enhancing microplastic removal from natural water using coagulant aids

Microplastic (MP) pollution poses a significant environmental challenge, underscoring the need for improved water treatment methods. This study investigates the effectiveness of coagulation, flocculation, and sedimentation processes for removing microbeads, focusing on key factors that influence removal efficiency. Among the coagulants tested, polyaluminium chloride (PAC) demonstrated superior performance by enhancing the aggregation of microplastics with flocs. Optimal treatment conditions were determined to be 0.4 mmol/L PAC and 3 mg/L polyacrylamide (PAM) at pH 8 (before adding PAC), with rapid stirring at 240 rpm for 1 min, followed by slow stirring at 35 rpm for 13 min, and a sedimentation period of 25 min. Under these conditions, removal efficiencies exceeded 95 % for a range of microbeads (10–1000 μm: Polystyrene (PS), Polypropylene (PP), Polyvinyl chloride (PVC), Polyamide (PA), Polyethylene (PE), and Polyurethane (PU)) from natural water samples. Without PAM, PAC alone achieved a 97 % removal rate for PS microbeads. The addition of PAM maintained high removal efficiency, while aluminium sulphate and ferric chloride were less effective, with removal rates of 67 % and 48 % for PS microbeads, respectively. PAM enhanced MP removal across various coagulants and microbead types, with maximum efficiency observed at PAM concentrations of ≥3 mg/L. The treatment also demonstrated that organic matter in Regent's Park pond water could further improve MP removal. Size significantly impacts removal efficiency: larger microbeads (1 mm to >250 μm) were removed more effectively (95 %) compared to smaller ones (10 to <250 μm), which had a lower removal rate of 49 %. Denser microbeads like PVC (density 1.38 g/cm³) settled more efficiently than lighter microbeads such as PE (density 0.97 g/cm³). These findings suggest a need for advanced technologies to better remove lighter, smaller MPs from water.

Advancements in laser technologies for skin rejuvenation: A comprehensive review of efficacy and safety.

Laser technology has fundamentally transformed the landscape of dermatology, offering nuanced solutions for skin rejuvenation and resurfacing. This paper aims to explore the spectrum of laser technologies, from ablative to non-ablative and fractional lasers, their mechanisms, benefits, and tailored applications for diverse skin conditions. As we delve into the intricacies of each technology, we also consider the scientific advancements that have made these treatments safer and more effective, promising a new horizon in skin rejuvenation. This comprehensive analysis seeks to evaluate recent advancements in laser technology for skin rejuvenation, focusing on efficacy, safety, and patient satisfaction. The selection criteria for studies in this publication focused on recent, peer-reviewed articles from the last 20 years, emphasizing advancements in laser technologies for skin rejuvenation. Our comprehensive review involved searches in PubMed, Cochrane, Scopus and Google Scholar using keywords like "skin rejuvenation," "laser technology," "efficacy," "safety," and "dermatology." This approach focused on inclusion of recent research and perspectives on the efficacy and safety of laser treatments in the field of dermatology. Our literature review reveals advancements in laser skin resurfacing technologies, notably fractional lasers for minimal downtime rejuvenation, ablative lasers for precise tissue vaporization, and non-ablative lasers for coagulation effect promoting collagen with reduced recovery. Hybrid and picosecond lasers are highlighted for their versatility and effectiveness in addressing a wide array of skin concerns. The findings also emphasize the development of safer treatment protocols for ethnic skin, significantly reducing risks like hyperpigmentation and scarring, thus broadening the scope of effective dermatological solutions. This extensive review of advancements in laser technologies for skin rejuvenation underscores a remarkable evolution in dermatological treatments, offering an expansive overview of the efficacy, safety, and patient satisfaction associated with these interventions. Furthermore, the exploration of combination treatments and laser-assisted drug delivery represents a frontier in dermatological practice, offering synergistic effects that could amplify the therapeutic benefits of laser treatments.

Removal of Colloidal Suspension through Coagulation – Flocculation Process In Water Purification – A Review

In water treatment, the most challenging problem that environmental engineers encounter is the separation and settling of colloids from water. Objective: The study aims to present various aspects of coagulation-flocculation in the removal of colloidal impurities from water. The shape, size, and significant characteristics of colloidal particles have been discussed in the present study. The colloidal systems, origin and nature of charge on colloids, and the stability theories including the concept of zeta potential have also been explained. The study has also been extended for conventional coagulants along with natural coagulants. The effectiveness of various coagulants has been extensively reviewed and presented herein. The review indicates that natural coagulants are equally effective as conventional salt-based coagulants. Conclusion: It is concluded from the present study that polymer-based coagulants are more effective than conventional coagulants. The removal of colloidal impurities from water is an important aspect. The separation of colloidal impurities by coagulation and flocculation is an effective method of water treatment that is safe and sustainable.