Effect Of Chain Length Research Articles

Effect of Hydrophobic Acrylic Monomers with Different Alkyl Side Chain Lengths on Reducing the Glistening of Hydrophobic Acrylic Intraocular Lens Materials

AbstractGlistening is the condensation of water that forms within the intraocular lens (IOL) materials. In this study, a new approach was attempted to reduce the glistening of IOL materials by introducing hydrophobic acrylic monomers with different alkyl side chain lengths into the IOL materials. Various hydrophobic acrylic monomers such as butyl acrylate (BA), 2‐ethylhexyl acrylate (EHA), and dodecyl acrylate (DA) were copolymerized with a hydrophobic acrylic monomer, 2‐phenoxyethyl acrylate, respectively. In this process, we investigated the effect of the alkyl side chain lengths of hydrophobic acrylic monomers on the glistening of hydrophobic acrylic IOL materials. As the content of hydrophobic acrylic monomers (BA, EHA, and DA) increased, the glistening of IOL materials decreased significantly for all hydrophobic acrylic monomers. At the same content of hydrophobic acrylic monomers, the IOL material showed the least content of glistening when copolymerized with DA. However, the IOL material obtained using BA exhibited the largest content of glistening, indicating that the glistening reduction effect was large in the order of DA>EHA>BA. These findings show that the glistening of IOL materials decreases with increasing alkyl side chain lengths of hydrophobic acrylic monomers.

Effects of Alkyl Side Chain Length on the Structural Organization and Proton Conductivity of Sulfonated Polyimide Thin Films

Effects of Alkyl Side Chain Length on the Structural Organization and Proton Conductivity of Sulfonated Polyimide Thin Films

Visualizing and Understanding the Ionic Liquid-Mediated Polybromide Electrochemistry for Aqueous Zinc-Bromine Redox Batteries.

Aqueous zinc-bromine redox systems possess multiple merits for scalable energy storage. Applying bromine complexing agents shows effectiveness in alleviating the key challenge of ubiquitous crossover of reactive liquid bromine species, while the underlying microscopic mechanism requires a deep understanding to engineer better complexing electrochemistry. Herein, taking a series of quaternary ammonium ionic liquids (methyl4NBr, ethyl4NBr, propyl4NBr, and butyl4NBr) as a redox mediator model, operando optical monitoring was used to visualize the dynamic electrochemical behaviors, unveiling the ionic liquid-mediated polybromide electrochemistry with a distinct chain length effect. A longer chain length possesses a stronger electrostatic interaction in the complexing product to effectively capture Br2. Operando results reveal the liquid nature of the reversibly electrogenerated polybromide microdroplets in the butyl4NBr-added redox system, which promoted the Br3-/Br- conversion kinetics and alleviated the self-discharge for improved battery performance. This work provides direct evidence and new insights into complexing electrochemistry for advancing Zn-Br2 batteries.

Tunable crystallization behavior, memory effect, and thermo-mechanical properties of biobased polyamides PA5X

To reduce carbon dioxide emissions, the development of sustainable bio-based polyamides with performance advantages has become the focus of widespread attention. 1,5-Pentanediamine (PDA) is a renewable monomer produced by decarboxylation of lysine, which can be used as a sustainable alternative to traditional petroleum-based diamines and play a crucial role in the synthesis of bio-based polyamides. Herein, a series of bio-based aliphatic polyamides (PA5X) synthesized from PDA and aliphatic diacids with different methylene groups were successfully prepared via melt polycondensation. Their chemical structures were characterized, and the effects of diacid chain length on crystallization behavior, memory effect, and thermo-mechanical properties were emphatically investigated. The results show that the melting and crystallization temperatures of PA5X decrease with increasing diacid chain length. Meanwhile, the PA5X exhibits high thermal stability, with Td,5 % exceeding 380 °C. Unlike the even-even polyamide, the crystalline form of PA5X is γ-form, and the crystallization behavior and spherulitic morphology change significantly with diacid chain length, which is attributed to the complex entanglement effects. More particularly, the correlation between the diacid chain length and the melt memory effect is explored. PA56 with shorter methylene groups exhibits stronger melt memory effects due to the memory effects being directly affected by segmental chain interactions. Moreover, PA5X exhibits comparable or even superior tensile strength and ductility compared with hexamethylenediamine-based polyamide (PA6X) and reported fully bio-based PA11. This work provides a comprehensive investigation into the structure-property relationship of the bio-based polyamide PA5X, demonstrating great potential for application in high-performance eco-friendly materials.

The Ether’s Chain Length Effect in Electrolyte for Hard carbon towards Efficient Sodium Storage at Low Temperature

The synergy between ether-based electrolytes (EBEs) and hard carbon (HC) in sodium-ion batteries (SIBs) enhances Coulombic efficiency, durability, and rate capability. Despite these advantages, the intricate relationship of how the molecular structure of ether solvents modifies electrolyte properties and, subsequently, sodium storage performance remains inadequately explored, especially for low-temperature applications, limiting the advancement of EBEs. Our study investigates ethylene glycol ether-based electrolytes with varying chain lengths to understand their influence on reaction kinetics and sodium storage. Notably, HC electrodes paired with NaPF6/ethylene glycol dimethyl ether exhibit superior performance, achieving 247.5 mAh g-1 after 2000 cycles at 1.0Ag-1. Even at -20 °C, these cells exhibit impressive endurance, retaining capacities of 257.5 mAh g-1 in half cells and 75.5 mAh g-1 in full cells at 0.1Ag-1 after 100 cycles, considering the entire mass of active material. Our thorough analysis indicates that the ether solvent with shorter chain length, distinguished by its low solvation-free energy and accelerated ionic kinetics, promotes rapid de-solvation and the formation of an inorganic-rich interface. Through this study, we illuminate the pivotal influence of solvent chain length on sodium storage in hard carbon, contributing to foundational insights towards the design of sophisticated electrolytes for SIBs.

Molecular dynamics simulations of lipid composition and its impact on structural and dynamic properties of skin membrane

The stratum corneum (SC) plays the most important role in the absorption of topical and transdermal drugs. In this study, we developed a multi-layered SC model using coarse-grained molecular dynamics (CGMD) simulations of ceramides, cholesterol, and fatty acids in equimolar proportions, starting from two different initial configurations. In the first approach, all ceramide molecules were initially in the hairpin conformation, and the membrane bilayers were pre-formed. In the second approach, ceramide molecules were introduced in either the hairpin or splayed conformation, with the lipid molecules randomly oriented at the start of the simulation. The aim was to evaluate the effects of lipid chain length on the structural and dynamic properties of SC. By incorporating ceramides and fatty acids of different chain lengths, we simulated the SC membrane in healthy and diseased states. We calculated key structural properties including the thickness, normalized lipid area, lipid tail order parameters, and spatial ordering of the lipids from each system. The results showed that systems with higher ordering and structural integrity contained an equimolar ratio of ceramides (chain length of 24 carbon atoms), fatty acids with chain lengths ≥ of 20 carbon atoms, and cholesterol. In these systems, strong apolar interactions between the ceramide and fatty acid long acyl chains restricted the mobility of the lipid molecules, thereby maintaining a compact lipid headgroup region and high order in the lipid tail region. The simulations also revealed distinct flip-flop mechanisms for cholesterol and fatty acid within the multi-layered membrane. Cholesterol is mostly diffused through the tail-tail interface region of the membrane and could flip-flop in the same bilayer. In contrast, fatty acids flip-flopped between adjacent leaflets of two bilayers in which the tails crossed the thinner headgroup region of the membrane. To conclude, our SC model provides mechanistic insights into lipid mobility and is flexible in its design and composition of different lipids, enabling studies of varying skin conditions.

Effect of alkyl chain length on the dielectric and electro-optical properties of graphene quantum dots doped cyanobiphenyl based nematic liquid crystals composites

The effects of alkyl chain length and doping of biocompatible/eco-friendly graphene quantum dots (GQDs) at 0.5 wt% on the dielectric and electro-optical properties of cyanobiphenyl (nCB, n = 5, 7) nematic liquid crystals (NLCs) are investigated using optical polarising microscope, electro-optical and dielectric spectroscopic techniques. Our results revealed that GQDs modulated the dielectric and electro-optical properties of nCB. Optical textural studies confirmed the uniform dispersion of GQDs in both NLCs (5CB and 7CB). The threshold voltage evaluated from voltage-dependent optical transmission was found to decrease by 16 % and 6 % in GQDs-5CB and GQDs-7CB composites compared to pure NLCs, respectively. The increment in birefringence by 2 % and 1.3 % and order parameter by 4 % and 0.6 % in GQDs composites with 5CB and 7CB, respectively was observed. Both transverse and longitudinal components of the dielectric permittivity (εˈ⊥ and εˈ∥) showed positive increments of 12 % and 5.4 % in GQDs-5CB composite as compared to pure 5CB. However, the increment was found to be 8.9 % and 4.1 % in GQDs-7CB composite. The GQDs-7CB composite exhibited fewer noticeable changes due to the stronger interaction between the molecules, as compared to GQDs-5CB composite. Our results showed that dispersion of GQDs and the number of carbon atoms ‘n’ in the alkyl chain of CB’s constituent molecules affects their properties, such as display parameters and mesophase stability of 5CB and 7CB homologues. Such GQDs-NLCs composites would be certainly useful in the tunable electrical and electro-optical devices.

Molecular dynamic simulation study on effect of anionic–nonionic surfactants on decane desorption from SiO2 surface

During oil production, some amount of crude oil is adsorbed on the rock layer. Therefore, surfactants are needed to detach the residual crude oil from this layer, thereby improving the overall oil recovery rate. In this study, five kinds of anionic–nonionic surfactants were designed by changing the length of ethylene oxide (EO) chains based on the structure of saturated cardanol. 8PO8EOSO3 exhibited good oil-detachment effectiveness, and this was assessed by studying the energy of interface interaction between the solid phase (SiO2) and the liquid phase (oil phase molecules, surfactants, and water). The density distribution data further elucidated that the good interface properties of 8PO8EOSO3 affected the degree of aggregation of the oil phase molecules on the SiO2 surface. This was mainly because the appropriate length of EO chains could realize optimal diffusion coefficients at the oil–water interface. Thus, in the 8PO8EOSO3 system, the oil phase molecules exhibited greater intermolecular distance and weak interactions with SiO2 (radial distribution function). Further, the study of the solid–liquid interface properties and effect of different chain lengths of EO chains on desorption showed that the appropriate number of and EO chains was an important factor in designing the structure of the extended surfactant to ensure that the surfactant realizes a high degree of detachment of the oil phase from SiO2.

Impact of side chain length on the properties and alkaline fuel cell performance of OEG-grafted poly(terphenyl piperidinium) anion exchange membranes

In designing comb-shaped anion exchange membranes (AEMs), replacing alkyl side chains with ethylene glycol (EG)-based ones significantly enhances membrane properties and boosts AEM fuel cell performance. Although much research has focused on optimizing the placement of EG segments within the polymer matrix, the effect of EG chain length remains less explored. In this work, a series of poly(terphenyl piperidinium) AEMs with N-oligo(ethylene glycol) (OEG) terminal pendants having two to five EG repeating units were prepared by simple post-polymerization quaternization. The membrane properties showed a strong correlation with the length of the OEG side chains, influenced by both chemical composition and phase behavior. Among the OEG-grafted AEMs, PTP-OEG3 with moderate three EG repeating units, exhibited the best properties due to a careful balance between EG and cationic groups, leading to a favorable microphased separation. It achieved high hydroxide conductivity (114 mS cm−1 at 80 °C in water), robust mechanical strength (tensile strength >52 MPa), and good ex situ alkaline stability. As a result, the AEM fuel cells with the property-balanced PTP-OEG3 membrane achieved the highest peak power density of 976 mW cm−2. The in situ stability of these AEMs was also investigated. Evidently, understanding the optimal EG side chain length is an important criterion for designing AEM materials for alkaline fuel cells.

The effect of perfluoroalkyl chain length and the type of acid group on PFAS adsorption from water

Widespread use of per- and polyfluoroalkyl substances (PFAS) poses significant ecological and health risks due to their non-degradability in the environment and consequent bioaccumulation in humans. In this work, we carried out a systematic computational study to unravel the effect of perfluorinated carbon chain length and the type of acid head group on the adsorption mechanism of PFAS from water. We considered the adsorption of perfluoroalkyl carboxylic acids (PFCA) and perfluoroalkyl sulfonic acids (PFSA) with chain lengths of three to eight perfluorinated carbons in hydrophobic all-silica zeolite Beta. Molecular dynamics (MD) simulations coupled with enhanced sampling calculations showed that adsorption free energies of both PFCA and PFSA decreased with increasing number of perfluorinated carbons. Calculated free energies further showed that PFCA and PFSA, which are anions in water, must overcome substantially large interfacial energy barriers to be adsorbed in hydrophobic pores. Subsequent ab initio MD simulations revealed that PFCA and PFSA gain a proton at the water–zeolite interface and are eventually adsorbed in neutral form. Breakdown of guest–host interaction energies into hydrophobic and polar components showed that hydrophobic interactions dominate PFCA adsorption whereas polar interactions are dominant in PFSA adsorption. This is due to sulfonic acid giving rise to stronger electrostatic interactions and the rearrangement of the electron density distribution in the perfluorinated carbon chain, which render the hydrophobic interactions relatively weaker. Our study reveals that a combination of adsorbents that provide optimized hydrophobic and polar interactions should be used for the capture of diverse PFAS from water.

Electrochemical behavior of mild steel coated with long alkyl-chain benzothiazole derivatives in acid solution: Effect of aliphatic chain length

Mild steel surfaces were coated with four different benzothiazole derivatives with long alkyl chain, namely 2-(heptyl)-benzothiazole (HEBT), 2-(tridecyl)-benzothiazole (TDBT), 2- (pentadecyl)-benzothiazole (PDBT), and 2-(heptadec-8-en-1-yl)benzothiazole (HDBT) from their respective chloroform solutions. Electrochemical experiments were conducted with coated and uncoated mild steel samples exposed to 1 M aqueous HCl at temperatures between 20°C to 50°C and at different immersion times from 6 h to 48 h. TDBT behaves as the best corrosion inhibitor among the four (more than 99 % efficiency at 40°C) and the order of inhibition efficiency follows the trend: TDBT>HDBT>PDBT>HEBT. This reflects the inhibition efficiency to increase with chain length initially, but decreases after a threshold. HDBT, in-spite of having longest aliphatic chain, exhibits better inhibitory performance over PDBT. This is attributed to the presence of unsaturation in HDBT. TDBT coating maintains high corrosion inhibition efficiency even after the 24 h of exposure (above 98 %). Occurrence of spatial hindrance during adsorption of BT derivatives with long aliphatic chain has been manifested by MD simulation.

Effect of the alkyl chain length of α,ω-dichloroalkane on the Gibbs energy of transfer for functional groups.

Ion-transfer reactions of alkyl and perfluoroalkyl carboxylate ions (CH3(CH2)n-2COO- with n = 8-12 and CF3(CF2)n-2COO- with n = 3-9) were investigated at the polarized Cl-(CH2)m-Cl with m = 2, 4, 6, and 8 (O) | water (W) interface to evaluate the effects of n and m on the solvation energy of the ions, as well as on their methylene and terminal groups. These ions exhibited reversible or quasi-reversible voltammetric waves due to their transfer across the O | W interfaces, enabling the determination of formal potentials and formal Gibbs transfer energies from O to W, . The values for CH3(CH2)n-2COO- and CF3(CF2)n-2COO- increased linearly with n, allowing the estimation of for methylene and difluoromethylene groups, (CH2) and (CF2), and for their terminal groups, (COO- + CH3) and (COO- + CF3). Whereas the (CH2) and (CF2) hardly changed with the variation in m, the (COO- + CH3) and (COO- + CF3) decreased noticeably. These results suggest that the solvation energy for ions in Cl-(CH2)m-Cl increases with m, regardless of hydrophilic or lipophilic nature of the ions. Based on these findings, the advantage of using Cl-(CH2)m-Cl with a large m as a non-aqueous solvent for ion-transfer voltammetry was discussed.

Formation and evolution of nanobubbles in CH4-H2O-Alcohol system: Insight into the effect of alcohol chain length from molecular dynamics simulations

Nanobubbles (NBs) which are gas filled cavities of nanometre dimensions present in liquids attracted increasing attention in the recent years due to their application in various fields such as chemistry, biology, medicine etc. An important aspect of NB research is the study of effect of additives on formation and evolution of these bubbles. The present study examined by applying molecular dynamics simulations, the formation and evolution of methane NBs in the CH4-H2O-Alcohol system, which is known to form during alcohol induced dissociation of CH4 hydrates in the natural gas extraction process. The effect of alcohol type and concentration on NB formation and evolution was examined through simulations of CH4-H2O-CH3OH, CH4-H2O-C2H5OH and CH4-H2O-nC3H7OH systems. The study revealed that increase in both concentration and the alkyl chain length of alcohols promoted NB formation. Alcohol molecules are found to enhance NB nucleation through accumulation near the NB-liquid interface resulting in a decrease in the surface tension (γ) at the interface. These effects become more pronounced as the alkyl chain length increases which explains the enhanced NB formation in systems containing nC3H7OH and C2H5OH compared to those containing CH3OH. The mechanism of formation and evolution of NBs is found to significantly depend on the type of alcohol present. NBs are found to nucleate at multiple locations in the systems containing nC3H7OH and C2H5OH which eventually coalesce to form a single large stable NB. In the presence of NBs which vary significantly in size, bubble growth was also found to occur through Ostwald ripening which involves transfer of CH4 from smaller NB to the larger one. In contrast, in the CH4-H2O-CH3OH system, primarily a single NB nucleated which grew in size through absorption of CH4 molecules dissolved in the liquid, rather than through coalescence or Ostwald ripening. The observed influence of alcohol type on the process of NB evolution is explained by examining the influence of alkyl chain length on γ and diffusivity of CH4 molecules. Due to the role of NBs on methane hydrate regeneration from the hydrate melt, we examined the influence of NB in the CH4-H2O-Alcohol system on the organization of water molecules (HSWs) present in the hydration shell of dissolved CH4. The value of F4 order parameter of HSWs and the number of hydrogen bonded water rings in the hydration shell of CH4 were analysed. The value of F4 order parameter indicate that the hydrophobic alkyl chain of alcohol induced hydrate like arrangement of HSWs, which is more pronounced in the case of alcohol with longer alkyl chain. However, alcohol molecules are also found to dislodge HSWs around CH4 resulting in a decrease in the number of water rings around dissolved CH4 which is not conducive to hydrate formation. These observations are consistent with the reported dual effect of alcohol on hydrate formation with alcohol promoting hydrate formation at low concentrations and inhibiting at high concentrations.

Phase equilibrium data for semiclathrate hydrates formed with n-propyl, tri-n-butylammonium bromide and tri-n-butyl, n-pentylammonium bromide under methane, carbon dioxide and nitrogen gas pressure

Semiclathrate hydrates are water-based materials formed from aqueous solutions of ionic substances. To enhance the gas capture performance of these materials, it is necessary to direct focus on the cation, which is a key part of construction of the hydrogen-bonding framework. In this paper, we focus on the partly-asymmetric cations, i.e., the n-propyl, tri-n-butylammonium bromide (N3444Br) and tri-n‑butyl, n-pentylammonium bromide (N4445Br), which are yet to be subjected to gas hydrate formation. The three phase equilibrium (gas–hydrate–liquid) conditions for the systems of (N3444Br or N4445Br) + H2O + (CH4, CO2 or N2) in the range of the pressure and mass fractions of the aqueous solutions between 1 and 11 MPa and 0.10–0.40, respectively, are reported. In all the systems, the semiclathrate hydrates were successfully formed under gas pressure. It was demonstrated that both the N3444Br and N4445Br salts promoted hydrate formation under these gases, while in the case with lean aqueous solutions N3444Br acted as an inhibitor of methane hydrate formation in pure water system. The present data are compared with the literature data, and the effect of the side chain length on the phase behavior of the semiclathrate hydrate phase is discussed.

Calcium Ion-Coupled Polyphosphates with Different Degrees of Polymerization for Bleeding Control.

The development of efficient hemostatic materials is crucial for achieving rapid hemorrhage control and effective wound healing. Inorganic polyphosphate (polyP) is recognized as an effective modulator of the blood coagulation process. However, the specific effect of polyP chain length on coagulation is not yet fully understood. Furthermore, calcium ions (Ca2+) are essential for the coagulation process, promoting multiple enzyme-catalyzed reactions within the coagulation cascade. Hence, calcium ion-coupled polyphosphate powders with three different degrees of polymerization (CaPP-n, n = 20, 50, and 1500) are synthesized by an ion-exchange reaction. CaPP exhibits a crystalline phase at a low polymerization degree and transitions to an amorphous phase as the polymerization degree increases. Notably, the addition of Ca2+ enhances the wettability of polyP, and CaPP promotes hemostasis, with varying degrees of effectiveness related to chain length. CaPP-50 exhibits the most promising hemostatic performance, with the lowest blood clotting index (BCI, 12.1 ± 0.7%) and the shortest clotting time (302.0 ± 10.5 s). By combining Ca2+ with polyP of medium-chain length, CaPP-50 demonstrates an enhanced ability to accelerate the adhesion and activation of blood cells, initiate the intrinsic coagulation cascade, and form a stable blood clot, outperforming both CaPP-20 and CaPP-1500. The hemostatic efficacy of CaPP-50 is further validated using rat liver bleeding and femoral artery puncture models. CaPP-50 is proven to possess hemostatic properties comparable to those of commercial calcium-based zeolite hemostatic powder and superior to kaolin. In addition, CaPP-50 exhibits excellent biocompatibility and long-term storage stability. These results suggest that CaPP-50 has significant clinical and commercial potential as an active inorganic hemostatic agent for rapid control of bleeding.

Photophysical Response of Propranolol in Biomimetic Micellar Media of Alkyltrimethylammonium Bromide Surfactants: Effect of pH and Alkyl Chain Length.

The photophysical behavior of a β-blocker drug propranolol (PPL) in micellar environments, formed by alkyltrimethylammonium bromide surfactants viz.; Cetyltrimethylammonium bromide (CTAB), Tetradecyltrimethylammonium bromide (TTAB), and Dodecyltrimethylammonium bromide (DTAB), has been investigated through fluorescence and UV-visible spectroscopic techniques at pH levels of 3.5, 7.4, and 10.4. The impact of pH on the critical micelle concentration (cmc) and micropolarity of micelles were assessed using pyrene as a photophysical probe. The cmc values were found to be lower at pH 10.4 compared to pH 7.4 and pH 3.5. Fluorescence emission intensities of PPL at 323nm, 338nm, and 352nm were significantly influenced by pH, hydrophobic alkyl chain length of surfactants, and their concentrations. Quenching experiments with Cetylpyridinium chloride (CpCl) indicated the localization of charged and uncharged forms of PPL within micelles, with quenching constant (Ksv) values dependent on alkyl chain length and pH. At pH < pKa, PPL is positioned near the Stern layer, whereas at pH 10.4, its naphthalene moiety resides near the hydrophobic micellar core. UV spectroscopy showed that the charged form of PPL interacted with micelles only above cmc, while the neutral form interacted even below the cmc. Density Functional Theory (DFT) reveals the HOMO of the surfactants to be localized on the hydrocarbon chains, and the LUMO localized around the quaternary ammonium unit. Upon complexation with PPL, both HOMO and LUMO shifted to the drug, thereby decreasing energy levels. The findings are explained based on weak noncovalent interactions, further supported and analyzed through Reduced Density Gradient (RDG) and Noncovalent Interaction (NCI) methods, confirming synergistic non-covalent interactions in surfactant-PPL complexes.

A Library of Custom PEG-Lipids reveals a Double-PEG-Lipid with Drastically Enhanced Paclitaxel Solubility and Human Cancer Cell Cytotoxicity when used in Fluid Micellar Nanoparticles.

Paclitaxel (PTX) is one of the most widely utilized chemotherapeutics globally. However, the extremely poor water solubility of paclitaxel necessitates a mechanism of delivery within blood. Fluid lipid PTX nanocarriers (lipids in the chain-melted state) show promise as PTX delivery vectors, but remain limited by their solubility of PTX within the membrane. To improve pharmacokinetics, membrane surfaces are typically coated with polyethylene glycol (PEG). Recent work has demonstrated the generation of a population of micelles within fluid lipid formulations containing a 2kDa PEG-lipid at a 10 mol% ratio. Driven by the positive curvature of the PEG-lipid (i.e. area of head group > area of tails), micelle-containing formulations were found to exhibit significantly higher uptake in cancer cells, cytotoxicity, and in vivo antitumor efficacy compared to formulations containing solely liposomes. Here, we describe the custom synthesis of a library of high-curvature micelle-inducing PEG-lipids and examine the effects of PEG chain length, chain branching (single- or double-PEG-lipid), and cationic charge on PTX solubility and cytotoxicity. We examined PEG-lipids at standard (10 mol%) and high (100-x mol%, where x=PTX mol%) formulation ratios. Remarkably, all formulations containing the synthesized high-curvature PEG-lipids had improved PTX solubility over unPEGylated formulations and commercially available DOPE-5k. The highest PTX solubility was found within the 100-xPTX mol% PEG-lipid micellar formulations, with particles made from 2k2 (two PEG2k chains) encapsulating 13 mol% PTX for up to 24 h. The pancreatic cancer cell line PC3 exhibited higher sensitivity to formulations containing PEG-lipid at 100-xPTX mol%, the most potent of which being formulations made from 2k2 (IC50 = 14 nM). The work presented here suggests formulations employing high-curvature PEG-lipids, particularly the double-PEG-lipid 2k2, hold great potential as next-generation PTX delivery systems owing to their high PTX solubility, enhanced cell cytotoxicity, and ability for precision targeting by affixation of ligands to the PEG molecules.

Substrate specificity of commercial lipases activated by a hydration–aggregation pretreatment in anhydrous esterification reactions

Substrate specificity in non-aqueous esterification catalyzed by commercial lipases activated by hydration–aggregation pretreatment was investigated. Four microbial lipases from Rhizopus japonicus, Burkholderia cepacia, Rhizomucor miehei, and Candida antarctica (fraction B) were used to study the effect of the carbon chain length of saturated fatty acid substrates on the esterification activity with methanol in n-hexane. Hydration–aggregation pretreatment had an activation effect on all lipases used, and different chain length dependencies of esterification activity for lipases from different origins were demonstrated. The effects of various acidic substrates with different degrees of unsaturation, aromatic rings, and alcohol substrates with different carbon chain lengths on esterification activity were examined using R. japonicus lipase, which demonstrated the most remarkable activity enhancement after hydration–aggregation pretreatment. Furthermore, in the esterification of myristic acid with methanol catalyzed by the hydrated–aggregated R. japonicus lipase, maximum reaction rate (5.43 × 10−5 mmol/(mg-biocat min)) and Michaelis constants for each substrate (48.5 mM for myristic acid, 24.7 mM for methanol) were determined by kinetic analysis based on the two-substrate Michaelis-Menten model.

Tetramerized Small‐Molecule Acceptor for Organic Solar Cells with Enhanced Efficiency, Stability, and Mechanical Robustness: Impact of Chain Length and Dispersity Effects

Tetramerized Small‐Molecule Acceptor for Organic Solar Cells with Enhanced Efficiency, Stability, and Mechanical Robustness: Impact of Chain Length and Dispersity Effects

Effects of chain length and saturation of triacylglycerols on the characteristics and gastrointestinal digestion fates of curcumin-loaded triacylglycerol nanoparticles

This study assessed the effects of fatty acid length and saturation on the physicochemical, thermal, and gastrointestinal digestive characteristics of curcumin-loaded homo-triacylglycerol nanoparticles (C-NPs). All C-NPs had good colloidal stability and efficiently entrapped curcumin, regardless of their length and saturation. Tricaprylin NPs, with shorter chains, had a smaller size and emulsifier surface load. Curcumin was released faster from low-melting C-NPs (tricaprylin and triolein) than those with high-melting-point (trimyristin, tripalmitin, and tristearin); however, both were negligible without lipolysis. None of the C-NPs underwent significant aggregation, coalescence, or breakdown during digestion before the small intestine. Notably, longer and more saturated chains resulted in a slower initial rate and lower degree of lipolysis in the small intestine. However, greater bioaccessibility of curcumin was observed only with longer chains (tricaprylin, 70.72%; trimyristin, 78.05%; tripalmitin, 85.09%; tristearin, 89.65%; triolein, 89.71%). These findings could be valuable for the development of rational curcumin formulations for functional foods.