Effect Of Biofield Energy Treatment Research Articles

Effect of Biofield Energy Treatment on Bone Cell Proliferation and Differentiation for the Assessment of its Potential to Improve Bone Health

The bone health is an important part of healthy - life and longevity in general. The present study was investigated to see the effect of the Biofield Energy Healing ( The Trivedi Effect ® ) on the human bone osteosarcoma cells - MG - 63 (ATCC ® CRL - 1427™) for the assessment of bone cell proliferation and differentiation in vitro . The study parameters were assessed using cell viability by MTT, collagen synthesis, and alkaline phosphatase (ALP) on bone health using ELISA - based assay. The cel l viability assay data showed significant response in all the tested groups; while in the Biofield Energy Treated group supplemented with 10% charcoal - dextran treated fetal bovine serum ( CD - FBS) (G3) showed better response (increased 63%) in terms of cells proliferation compared to the untreated cell group (G1). The level of ALP was increased by 32% in the G3 group compared to the untreated cells group (G1). Additionally, the level of collagen synthesis was increased by 27% in the G3 group compared to the G 1 group. The overall results demonstrated that the Biofield Energy Treatment has the potential for bone mineralization and bone growth as evident via increased levels of collagen and ALP. Therefore, the Biofield Energy Healing ( The Trivedi Effect ® ) Treatme nt might be useful as a bone health promoter for various bone - related disorders like low bone density, osteogenesis imperfecta, and osteoporosis.

Evaluation of the Effect ofBiofield Energy Treatment on Physicochemical and Thermal Properties of Hydroxypropyl β-Cyclodextrin

Hydroxypropyl β-Cyclodextrin (HPBCD) has many applications in the foods, nutraceuticals, and pharmaceuticals industries. The primary objective of this study was to evaluate the influence of the Trivedi Effect® on the physicochemical and thermal properties of HPBCD using modern analytical techniques. The HPBCD test sample was divided into two parts. One part did not receive the Biofield Energy Treatment and was called as a control sample, whereas, the other part received the Biofield Energy Treatment remotely by a renowned Biofield Energy Healer, Alice Branton and was called as a treated sample. The particle size values of the treated HPBCD were decreased by 5.32%, 1.51%, 0.36%, and 1.12% at d10, d50, d90, and D (4,3), respectively compared with the control sample. Thus, the surface area of the treated HPBCD was significantly increased by 6.67% compared with the control sample. The evaporation and melting temperature of the treated HPBCD were increased by 4.76% and 1.92%, respectively compared with the control sample. However, the latent heat of evaporation and latent heat of fusion of the treated HPBCD were significantly decreased by 7.95% and 33.85%, respectively compared to the control sample. The total weight loss in the treated HPBCD sample was decreased by 1.83% compared with the control sample. But, the residue amount was 40.55% more in the case of the treated HPBCD compared to the control sample. The Trivedi Effect®-Consciousness Energy Healing Treatment introduced a new form of HPBCD which may show better stability, solubility, dissolution rate, absorption, and bioavailability compared to the control sample. The treated would be more useful for the improvement of solubility of the lipophilic drug, stabilize volatile and unstable compounds, preparation of cholesterol free food products, weight loss supplements, and other anti-obesity medication, and also for the industry using it as a raw material.

Effect of Biofield Energy Treatment on Chlorophyll Content, Pathological Study, and Molecular Analysis of Cashew Plant (Anacardium occidentale L.)

In the world scenario, India occupies a premier position contributing to about 43 per cent production of the cashew nut (Anacardium occidentale L.) along with export and processing. The aim is to study the impact of biofield energy treatment on selected farms for cashew farming. The control and biofield treated farms were divided as control and treated farms, and Mr. Trivedi provided the biofield energy treatment to the treated farms. Further, the plants and fruits were analyzed for overall growth of plants, chlorophyll content, productivity, pathological study, and shelf life using UN specifications for International Trade, biophoton emission study, and DNA fingerprinting using RAPD method. No chemicals, fertilizers, were used on the treated plot, although regular practices were followed on control farms such as fertilizers, pesticides and fungicides due to the high incidence of disease and the requirement of nutritional supplements in the region. The analysis showed that biofield treated farm plants have thicker and stronger branches with more secondary and tertiary branches, flowering pattern, and canopy of plants was improved than trees of the same variety along with height of the plants, as compared with the control. The results showed that chlorophyll a and b content in biofield treated lands plants were increased by approximately 30% and 93% respectively, while total chlorophyll content by 45% as compared with the control. The pathological examination showed the presence of fungi namely Colletotrichum gloeosporioides and Botryodiplodia theobromae in control, which were absent in treated plants. Biophoton study suggested that the cashew fruits were bigger in size with high density, strength, and vitality as compared with the control. The shelf life analysis reflected that the biofield treated cashews showed sweet taste, and can be stored for longer duration due to less moisture, and altered minerals content, such as high iodine, and low p-anisidine level. RAPD analysis showed a high level of polymorphism among control and treated samples, while level of true polymorphism among V4 variety of cashew was ranges from 0 to 100%, and in V7 variety, it ranged from 25 to 91% using different set of RAPD primers. Overall, study results suggest that Mr. Trivedi’s biofield energy treatment on land planted with cashew could be an alternative approach to improve the overall growth of plant, and fruit yield.

Evaluation of Isotopic Abundance Ratio in Biofield Energy Treated Nitrophenol Derivatives Using Gas Chromatography-Mass Spectrometry

Nitrophenols are the synthetic organic chemicals used for the preparation of synthetic intermediates, organophosphorus pesticides, and pharmaceuticals. The objective of the present study was to evaluate the effect of biofield energy treatment on the isotopic abundance ratios of PM+1/PM, and PM+2/PM in o- and m-nitrophenol using the gas chromatography-mass spectrometry. The o- and m-nitrophenol were divided into two parts - one part was control sample, and another part was considered as biofield energy treated sample, which received Mr. Trivedi’s biofield energy treatment (The Trivedi Effect® ). The biofield energy treated nitrophenols having analyzed at different time intervals were designated as T1, T2, T3, and T4. The GCMS analysis of both the control and biofield treated samples indicated the presence of the parent molecular ion peak of o- and mnitrophenol (C6H5NO3 + ) at m/z 139 along with major fragmentation peaks at m/z 122, 109, 93, 81, 65, and 39. The relative peak intensities of the fragmented ions in the biofield treated o- and m-nitrophenol were notably changed as compared to the control sample with respect to the time. The isotopic abundance ratio analysis using GC-MS revealed that the isotopic abundance ratio of PM+1/PM in the biofield energy treated o-nitrophenol at T2 and T3 was significantly increased by 14.48 and 86.49%, respectively as compared to the control sample. Consequently, the isotopic abundance ratio of PM+2/PM in the biofield energy treated sample at T2 and T3 was increased by 11.36, and 82.95%, respectively as compared to the control sample. Similarly, in m-nitrophenol, the isotopic abundance ratio of PM+1/PM in the biofield energy treated sample at T1, T3, and T4 was increased by 5.82, 5.09, and 6.40%, respectively as compared to the control sample. Subsequently, the isotopic abundance ratio of PM+2/PM at T1, T2, T3 and T4 in the biofield energy treated m-nitrophenol was increased by 6.33, 3.80, 16.46, and 16.46%, respectively as compared to the control sample. Overall, the isotopic abundance ratios of PM+1/PM (2H/1H or 13C/12C or 15N/14N or 17O/16O), and PM+2/PM (18O/16O) were altered in the biofield energy treated o- and m-nitrophenol as compared to the control increased in most of the cases. The biofield treated o- and m-nitrophenol that have improved isotopic abundance ratios might have altered the physicochemical properties and could be useful in pharmaceutical and chemical industries as an intermediate in the manufacturing of pharmaceuticals and other useful chemicals for the industrial application.

Effect of Biofield Energy Treatment on Streptococcus group B: A Postpartum Pathogen

Streptococcus agalactiae group B (S. agalactiae gr. B) is widespread in nature mainly causes bacterial septicemia and neonatal meningitis. The current study was attempted to investigate the effect of biofield treatment on S. agalactiae gr. B with respect of antimicrobial sensitivity, biochemical reactions and bio typing. S. agalactiae gr. B strain was used in this experiment bearing the American Type Culture Collection (ATCC 12386) number and stored according to the recommended storage protocol. The revived and lyophilized state of ATCC strains of S. agalactiae gr. B were selected for the study. Gr. I was considered as control. Both revived (Group; Gr. II) and lyophilized (Gr. III) strains of S. agalactiae gr. B were subjected to Mr. Trivedi’s biofield treatment. Gr. II was assessed on day 5 and day 10 while Gr. III on day 10 with respect to the control (Gr. I) using MicroScan Walk-Away® system. Although biofield treatment did not show any change with respect to susceptibility pattern. However the minimum inhibitory concentration of S. agalactiae gr. B showed significant (70.37%) alteration, out of twenty-seven tested antimicrobials, among which in Gr. II i.e. 62.96% on day 5 and 66.67% on day 10 while no alteration was found in lyophilized group (Gr. III) as compared to the control. Moreover, the improvement of MIC value of norfloxacin was observed by two-fold (8 to ≤4 µg/mL) in Gr. II on day 10 after biofield energy treatment as compared to the control. It was observed that overall 48.28% biochemical reactions, out of twenty-nine were altered in Gr. II with respect to the control. Moreover, biotype numbers were changed in Gr. II on day 5 (777777615) and on day 10 (757677405) as compared to the control (237147047). The results suggest that biofield treatment has significant impact on S. agalactiae gr. B in revived treated cells (Gr. II) with respect to MIC values, biochemical reactions pattern and biotype number.

Isotopic Abundance Ratio Analysis of Biofield Energy Treated Indole Using Gas Chromatography-Mass Spectrometry

The objective of the current experiment was to evaluate the effect of biofield energy treatment on the isotopic abundance ratio of PM+1/PM (2H/1H or 13C/12C or 15N/14N) in indole using the gas chromatography-mass spectrometry (GC-MS). The sample of organic compound indole was divided into two parts - one part was designated as a control sample (untreated), and another part was considered as biofield energy treated sample, which was subjected to Mr. Trivedi’s biofield energy treatment (The Trivedi Effect®). The biofield energy treated indole sample was analyzed at different time intervals and were symbolized as T1, T2, T3, and T4 to understand the effect of the biofield energy on isotopic abundance ratio with respect to the time. From the GC-MS spectra, the presence of the molecular ion peak C8H7N+ (m/z 117) along with major fragmented peaks C7H6+ (m/z 90), C7H5+ (m/z 89), C5H3+ (m/z 63), C4H2+ (m/z 50), C3H3+ (m/z 39), and C2H4 (m/z 28) were observed in both control and biofield treated samples. Only, the relative peak intensities of the fragmented ions in the biofield treated indole was notably changed as compared to the control sample with respect to the time. The isotopic abundance ratio analysis of indole using GC-MS revealed that the isotopic abundance ratio of PM+1/PM in the biofield energy treated indole at T1 and T2 was significantly decreased by 44.28 and 28.18% as compared to the control sample. On the contrary, the isotopic abundance ratio of PM+1/PM in the biofield energy treated sample at T3 and T4, was significantly increased by 41.22 and 180.88%, respectively as compared to the control sample. Overall, the isotopic abundance ratio of PM+1/PM (2H/1H or 13C/12C or 15N/14N) was significantly altered in the biofield energy treated indole as compared to the control with respect to the time. The biofield treated indole with the altered isotopic abundance ratio might have altered the physicochemical properties and rate of reaction. This biofield energy treated indole might be more useful as a chemical intermediate in the production of pharmaceuticals, chemicals, plastics, dyes, and perfumes.

Determination of Isotopic Abundance Ratio of Biofield Energy Treated 1,4-Dichlorobenzene Using Gas Chromatography-Mass Spectrometry (GC-MS)

The objective of the current study was to evaluate the effect of biofield energy treatment on the isotopic abundance ratios of P M+1/PM, PM+2/PM, PM+3/PMand PM+4/PM in p-DCB using gas chromatography-mass spectrometry (GC-MS). The p-DCB was divided into two parts - one part was control sample, and another part was considered as the treated sample which was subjected to biofield energy treatment (The Trivedi Effect®). T1, T2, T3, and T4 were referred the biofield treated p-DCB having analyzed at different time intervals. The GC-MS analysis of both the control and biofield treated p-DCB indicated the presence of the parent molecular ion peak at m/z 146 along with four major fragmentation peaks at m/z 111, 75, 55 and 50. The relative peak intensities of the fragmented ions in the biofield treated p-DCB were notably changed as compared to the control sample with respect to the time. The isotopic abundance ratio analysis using GC-MS revealed that the isotopic abundance ratio of PM+1/PM at T1, T2, T3, and T4 (biofield energy treated p-DCB) was significantly increased by 10.87, 83.90, 225.16, and 241.15%, respectively as compared to the control sample. Consequently, the percentage change in the isotopic abundance ratio of PM+2/PM at T1, T2, and T3 (biofield energy treated p-DCB) was enhanced by 4.55, 9.49, and 1.80%, respectively as compared to the control sample. Beside these, another two isotopic molecular ion peaks at m/z 149 and 150 were found in the GS-MS spectra due to arise from the contributions of various combinations of 2H, 13C, and 37Cl. The isotopic abundance ratios of PM+3/PM in biofield energy treated sample at T1, T2, T3, and T4 was significantly increased by 15.14, 82.57, 192.43, and 218.31%, respectively as compared to the control sample. Similarly, the PM+4/PM in biofield energy treated sample at T1, T2, T3, and T4 was significantly increased by 13.80, 86.66, 186.13, and 204.29%, respectively as compared to the control sample. Overall, the isotopic abundance ratios of PM+1/PM (2H/1H or 13C/12C), PM+2/PM (37Cl/35Cl), for PM+3/PM and PM+4/PM (the probable combinations of 2H/1H, 13C/12C, and 37Cl/35Cl) were significantly enhanced in the biofield energy treated p-DCB. The biofield treated p-DCB has shown improved isotopic abundance ratios that might have altered the physicochemical properties, thermal properties and rate of reaction. Biofield treated p-DCB might be useful in pharmaceutical and chemical industries as intermediates during the manufacturing of pharmaceuticals and chemicals by monitoring the rate of chemical reaction.

Evaluation of Isotopic Abundance Ratio in Biofield Energy Treated Nitrophenol Derivatives Using Gas Chromatography-Mass Spectrometry

Nitrophenols are the synthetic organic chemicals used for the preparation of synthetic intermediates, organophosphorus pesticides, and pharmaceuticals. The objective of the present study was to evaluate the effect of biofield energy treatment on the isotopic abundance ratios of PM+1/PM, and PM+2/PM in o- and m-nitrophenol using the gas chromatography-mass spectrometry. The o- and m-nitrophenol were divided into two parts - one part was control sample, and another part was considered as biofield energy treated sample, which received Mr. Trivedi’s biofield energy treatment (The Trivedi Effect®). The biofield energy treated nitrophenols having analyzed at different time intervals were designated as T1, T2, T3, and T4. The GC-MS analysis of both the control and biofield treated samples indicated the presence of the parent molecular ion peak of o- and m-nitrophenol (C6H5NO3+) at m/z 139 along with major fragmentation peaks at m/z 122, 109, 93, 81, 65, and 39. The relative peak intensities of the fragmented ions in the biofield treated o- and m-nitrophenol were notably changed as compared to the control sample with respect to the time. The isotopic abundance ratio analysis using GC-MS revealed that the isotopic abundance ratio of PM+1/PM in the biofield energy treated o-nitrophenol at T2 and T3 was significantly increased by 14.48 and 86.49%, respectively as compared to the control sample. Consequently, the isotopic abundance ratio of PM+2/PM in the biofield energy treated sample at T2 and T3 was increased by 11.36, and 82.95%, respectively as compared to the control sample. Similarly, in m-nitrophenol, the isotopic abundance ratio of PM+1/PM in the biofield energy treated sample at T1, T3, and T4 was increased by 5.82, 5.09, and 6.40%, respectively as compared to the control sample. Subsequently, the isotopic abundance ratio of PM+2/PM at T1, T2, T3 and T4 in the biofield energy treated m-nitrophenol was increased by 6.33, 3.80, 16.46, and 16.46%, respectively as compared to the control sample. Overall, the isotopic abundance ratios of PM+1/PM (2H/1H or 13C/12C or 15N/14N or 17O/16O), and PM+2/PM (18O/16O) were altered in the biofield energy treated o- and m-nitrophenol as compared to the control increased in most of the cases. The biofield treated o- and m-nitrophenol that have improved isotopic abundance ratios might have altered the physicochemical properties and could be useful in pharmaceutical and chemical industries as an intermediate in the manufacturing of pharmaceuticals and other useful chemicals for the industrial application.

Evaluation of Atomic, Physical and Thermal Properties of Tellurium Powder: Impact of Biofield Energy Treatment

Tellurium has gained significant attention due to its photoconductivity, piezoelectricity, and thermo conductivity properties. The aim of this study was to evaluate the effect of biofield energy treatment on thermal, physical and atomic properties of tellurium powder. The tellurium powder was equally divided in two parts: control and treated (T). The treated part was subjected to Mr. Trivedi’s biofield energy treatment, whereas the control part was remained untreated. Subsequently, the control and treated samples were characterized using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and Fourier transform infrared (FT-IR) spectroscopy. The DSC data showed that latent heat of fusion was decreased by 14.13, 21.90, and 5.55% in treated samples T1, T2, and T3, respectively as compared to the control. However, the melting temperature did not show any change in treated samples as compared to the control. The TGA data showed that the peak width (difference in onset and endset) was increased from 213.67°C (control) to 234.82°C in treated tellurium sample. Besides, XRD results exhibited an alteration in lattice parameter, unit cell volume, density, atomic weight and nuclear charge volume of the treated tellurium powder as compared to the control. In addition, the crystallite sizes were significantly changed on crystalline plane (102) and (110) as 146.05→48.67 nm and 63.01→88.21 nm, respectively in the treated tellurium. The FT-IR spectra did not show any significant change in absorption frequencies in treated sample as compared to the control. Therefore, DSC, TGA and XRD data suggested that Mr. Trivedi’s biofield energy treatment has significantly altered the thermal and physical properties of tellurium powder. Thus, biofield energy treatment could be applied to modulate the thermal and physical properties in semiconductor and chalcogenide glass industries.

Effect of Biofield Energy Treatment on Streptococcus group B: A Postpartum Pathogen

Effect of Biofield Energy Treatment on Streptococcus group B: A Postpartum Pathogen

Analysis of Physical, Thermal, and Structural Properties of Biofield Energy Treated Molybdenum Dioxide

Molybdenum dioxide (MoO2) is known for its catalytic activity toward reforming hydrocarbons. The objective of this study was to evaluate the effect of biofield energy treatment on physical, thermal, and structural properties in MoO2. The MoO2 powder sample was divided into two parts, one part was remained as untreated, called as control, while the other part was subjected to Mr. Trivedi’s biofield energy treatment and called as treated. Both control and treated samples were investigated using X-ray diffraction (XRD), thermogravimetric analysis (TGA), and Fourier transform infrared (FT-IR) spectroscopy. The XRD data exhibited that the biofield treatment has altered the lattice parameters, unit cell volume, density and molecular weight of the treated sample as compared to the control. The TGA study revealed that the onset temperature of thermal degradation of MoO2 was reduced from 702.87°C to 691.92°C. Besides, the FT-IR spectra exhibited that the absorption band corresponding to Mo=O stretching vibration was shifted to lower wavenumber i.e. 975 cm-1 (control) to 970 cm-1 in treated sample. Hence, above results suggested that biofield energy treatment has altered the physical, thermal, and structural properties in MoO2 powder. Therefore, the biofield treatment could be applied to modify the catalytic properties of MoO2 in pharmaceutical industries.

Physicochemical Characterization of Biofield Treated Orchid Maintenance/Replate Medium

Orchids are used worldwide for indoor decoration, vanilla production, and beverage preparation. They are also reported for their therapeutic efficacy in brain-related problems. The in vitro micropropagation technique was used for their propagation using the orchid maintenance/replate (OMR) medium. The current study was based on analysing the effect of biofield energy treatment on the physicochemical properties of OMR medium. A part of the sample was treated with Mr. Trivedi’s biofield energy; various physicochemical properties were analyzed and compared with the untreated (control) part. The X-ray diffraction analysis revealed the decrease in crystallite size of treated sample (132.80 nm) as compared to the control (147.55 nm). The particle size analysis revealed 20.78% increase in average particle size and 39.29% increase in d99 (size below which 99% particles are present) of the treated OMR medium as compared to the control. Moreover, the surface area of the treated sample was reduced by 3.9%, supporting the data of particle size analysis. The thermal analysis studies revealed an increase in the thermal stability of the treated OMR medium as compared to the control. The analysis was done by using differential scanning calorimetry that showed increase in melting point (1.23%) and latent heat of fusion (135.7%); and thermogravimetric analysis that reported increase in onset temperature and maximum thermal degradation temperature of the treated sample as compared to the control. Besides, the CHNSO analysis revealed the increase in percentage of nitrogen (22.22%) as well as the presence of sulphur in the treated sample. The Fourier transform infrared and UV-visible spectroscopy also showed the differences in the spectra of the treated sample as compared to the control OMR medium. Hence, the overall data revealed the impact of biofield energy treatment on the physicochemical properties of the treated sample that might be used in better way in the in vitro culture techniques as compared to the control sample.

Physicochemical and Spectroscopic Characterization of Biofield Energy Treated p-Anisidine

The p-anisidine is widely used as chemical intermediate in the production of various dyes, pigments, and pharmaceuticals. This study was aimed to evaluate the effect of biofield energy treatment on the physicochemical and spectroscopic properties of p-anisidine. The study was performed after dividing the sample in two groups; one was remained as untreated and another was subjected to Mr. Trivedi’s biofield energy treatment. Afterward, both the control and treated samples of p-anisidine were evaluated using X-ray diffraction (XRD), surface area analyzer, differential scanning calorimetry (DSC), thermogravimetric analysis-derivative thermogravimetry (TGA-DTG), Fourier transform infrared (FT-IR), and ultraviolet-visible (UV-Vis) spectroscopy. The XRD analysis showed the increase in unit cell volume from 683.81 → 690.18 × 10-24 cm3 and crystallite size from 83.84→84.62 nm in the treated sample with respect to the control. The surface area analysis exhibited the significant increase (25.44%) in the surface area of treated sample as compared to control. The DSC thermogram of control p-anisidine showed the latent heat of fusion and melting temperature and 146.78 J/g and 59.41°C, respectively, which were slightly increased to 148.89 J/g and 59.49°C, respectively after biofield treatment. The TGA analysis showed the onset temperature of thermal degradation at 134.68°C in the control sample that was increased to 150.02°C after biofield treatment. The result showed about 11.39% increase in onset temperature of thermal degradation of treated p-anisidine as compared to the control. Moreover, the Tmax (temperature at which maximum thermal degradation occurs) was also increased slightly from 165.99°C (control) to 168.10°C (treated). This indicated the high thermal stability of treated p-anisidine as compared to the control. However, the FT-IR and UV spectroscopic studies did not show any significant changes in the spectral properties of treated p-anisidine with respect to the control. All together, the XRD, surface area and thermal analysis suggest that Mr. Trivedi’s biofield energy treatment has the impact on physical and thermal properties of the treated p-anisidine.

Effect of Biofield Energy Treatment on Physical and Structural Properties of Calcium Carbide and Praseodymium Oxide

Effect of Biofield Energy Treatment on Physical and Structural Properties of Calcium Carbide and Praseodymium Oxide

Evaluation of Thermal and Physical Properties of Magnesium Nitride Powder: Impact of Biofield Energy Treatment

Magnesium nitride (Mg3N2) has gained extensive attention due to its catalytic and optoelectronic properties. The present investigation was aimed to evaluate the effect of biofield energy treatment on physical and thermal properties of Mg3N2 powder. The Mg3N2 powder was divided into two parts i.e. control and treated. The control part was remained as untreated and the treated part was subjected to the Mr. Trivedi’s biofield energy treatment. Subsequently, the control and treated Mg3N2 samples were characterized using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and X-ray diffraction (XRD). The DSC results showed the specific heat capacity of 2.24 Jg-1°C-1 in control, which increased upto 5.55 Jg-1°C-1 in treated Mg3N2 sample. The TGA data revealed that the onset temperature for the formation of magnesium oxide, possibly due to oxidation of Mg3N2 in the presence of air and moisture, was reduced from 421.0°C (control) to 391.33°C in treated sample. Besides, the XRD data revealed that the lattice parameter and unit cell volume of treated Mg3N2 samples were increased by 0.20 and 0.61% respectively, as compared to the control. The shifting of all peaks toward lower Bragg angle was observed in treated sample as compared to the control. The XRD diffractogram also showed that the relative intensities of all peaks were altered in treated sample as compared to control. In addition, the density of treated Mg3N2 was reduced by 0.60% as compared to control. Furthermore, the crystallite size was significantly increased from 108.05 nm (control) to 144.04 nm in treated sample as compared to the control. Altogether data suggest that biofield energy treatment has substantially altered the physical and thermal properties of Mg3N2 powder. Thus, the biofield treatment could be applied to modulate the catalytic and optoelectronic properties of Mg3N2 for chemical and semiconductor industries.

Evaluation of Atomic, Physical and Thermal Properties of Tellurium Powder: Impact of Biofield Energy Treatment

Tellurium has gained significant attention due to its photoconductivity, piezoelectricity, and thermo conductivity properties. The aim of this study was to evaluate the effect of biofield energy treatment on thermal, physical and atomic properties of tellurium powder. The tellurium powder was equally divided in two parts: control and treated (T). The treated part was subjected to Mr. Trivedi’s biofield energy treatment, whereas the control part was remained untreated. Subsequently, the control and treated samples were characterized using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and Fourier transform infrared (FT-IR) spectroscopy. The DSC data showed that latent heat of fusion was decreased by 14.13, 21.90, and 5.55% in treated samples T1, T2, and T3, respectively as compared to the control. However, the melting temperature did not show any change in treated samples as compared to the control. The TGA data showed that the peak width (difference in onset and endset) was increased from 213.67°C (control) to 234.82°C in treated tellurium sample. Besides, XRD results exhibited an alteration in lattice parameter, unit cell volume, density, atomic weight and nuclear charge volume of the treated tellurium powder as compared to the control. In addition, the crystallite sizes were significantly changed on crystalline plane (102) and (110) as 146.05→48.67 nm and 63.01→88.21 nm, respectively in the treated tellurium. The FT-IR spectra did not show any significant change in absorption frequencies in treated sample as compared to the control. Therefore, DSC, TGA and XRD data suggested that Mr. Trivedi’s biofield energy treatment has significantly altered the thermal and physical properties of tellurium powder. Thus, biofield energy treatment could be applied to modulate the thermal and physical properties in semiconductor and chalcogenide glass industries.

Effect of Biofield Energy Treatment on Streptococcus group B: A Postpartum Pathogen

Streptococcus agalactiae group B (S. agalactiae gr. B) is widespread in nature mainly causes bacterial septicemia and neonatal meningitis. The current study was attempted to investigate the effect of biofield treatment on S. agalactiae gr. B with respect of antimicrobial sensitivity, biochemical reactions and bio typing. S. agalactiae gr. B strain was used in this experiment bearing the American Type Culture Collection (ATCC 12386) number and stored according to the recommended storage protocol. The revived and lyophilized state of ATCC strains of S. agalactiae gr. B were selected for the study. Gr. I was considered as control. Both revived (Group; Gr. II) and lyophilized (Gr. III) strains of S. agalactiae gr. B were subjected to Mr. Trivedi’s biofield treatment. Gr. II was assessed on day 5 and day 10 while Gr. III on day 10 with respect to the control (Gr. I) using MicroScan Walk-Away® system. Although biofield treatment did not show any change with respect to susceptibility pattern. However the minimum inhibitory concentration of S. agalactiae gr. B showed significant (70.37%) alteration, out of twenty-seven tested antimicrobials, among which in Gr. II i.e. 62.96% on day 5 and 66.67% on day 10 while no alteration was found in lyophilized group (Gr. III) as compared to the control. Moreover, the improvement of MIC value of norfloxacin was observed by two-fold (8 to ≤4 μg/mL) in Gr. II on day 10 after biofield energy treatment as compared to the control. It was observed that overall 48.28% biochemical reactions, out of twenty-nine were altered in Gr. II with respect to the control. Moreover, biotype numbers were changed in Gr. II on day 5 (777777615) and on day 10 (757677405) as compared to the control (237147047). The results suggest that biofield treatment has significant impact on S. agalactiae gr. B in revived treated cells (Gr. II) with respect to MIC values, biochemical reactions pattern and biotype number.

Physicochemical and Spectroscopic Characterization of p-Chlorobenzaldehyde: An Impact of Biofield Energy Treatment

p-Chlorobenzaldehyde (p-CBA) is used as an important chemical intermediate for the preparation of pharmaceuticals, agricultural chemicals, dyestuffs, optical brighteners, and metal finishing products. The study aimed to evaluate the effect of biofield energy treatment on the physicochemical and spectroscopic properties of p-CBA. The study was accomplished in two groups i.e. control and treated. The control group was remained as untreated, while the treated group was subjected to Mr. Trivedi’s biofield energy treatment. Finally, both the samples (control and treated) were evaluated using various analytical techniques. The surface area analysis showed a substantial increase in the surface area by 23.06% after biofield treatment with respect to the control sample. The XRD analysis showed the crystalline nature of both control and treated samples. The X-ray diffractogram showed the significant alteration in the peak intensity in treated sample as compared to the control. The XRD analysis showed the slight increase (2.31%) in the crystallite size of treated sample as compared to the control. The TGA analysis exhibited the decrease (10%) in onset temperature of thermal degradation form 140°C (control) to 126°C in treated sample. The Tmax (maximum thermal degradation temperature) was slightly decreased (2.14%) from 157.09°C (control) to 153.73°C in treated sample of p-CBA. This decrease in Tmax was possibly due to early phase of vaporization in treated sample as compared to the control. The FT-IR spectrum of treated p-CBA showed the increase in wavenumber of C=C stretching as compared to the control. The UV spectroscopic study showed the similar pattern of wavelength in control and treated samples. Altogether, the surface area, XRD, TGA-DTG and FT-IR analysis suggest that Mr. Trivedi’s biofield energy treatment has the impact to alter the physicochemical properties of p-CBA. This treated p-CBA could be utilized as a better chemical intermediate than the control p-CBA for the synthesis of pharmaceutical drugs and organic chemicals.

Antimicrobial Sensitivity, Biochemical Characteristics and Biotyping of Staphylococcus saprophyticus: An Impact of Biofield Energy Treatment

Staphylococcus saprophyticus (S. saprophyticus) is a frequent cause of urinary tract infection in the young women. The current study was designed to analyze the effect of biofield energy treatment on S. saprophyticus for evaluation of its antibiogram profile, biochemical reactions pattern and biotyping characteristics. Two sets of ATCC samples were taken in this experiment and denoted as A and B. Sample A was revived and divided into two parts Group (Gr.I) (control) and Gr.II (revived); likewise, sample B was labeled as Gr.III (lyophilized). Gr. II and III were given with Mr. Trivedi’s biofield energy treatment. The control and treated groups of S. saprophyticus cells were tested with respect to antimicrobial susceptibility, biochemical reactions pattern and biotype number using MicroScan Walk-Away® system. The 50% out of twenty-eight tested antimicrobials showed significant alteration in susceptibility and 36.67% out of thirty antimicrobials showed an alteration in minimum inhibitory concentration (MIC) value of S. saprophyticus in revived treated cells (Gr. II, day 10), while no alteration was found in lyophilized treated cells (Gr. III, day 10) as compared to the control. It was also observed that overall 14.81%, out of twenty-seven biochemical reactions were altered in the revived treated group with respect to the control. Moreover, biotype number was changed in Gr. II, on day 5 (246076) and in Gr. III, on day 10 (242066), while organism along-with biotype number was also changed in Gr. II, on day 10 (342066, Staphylococcus hominis subsp. novobiosepticus) as compared to the control (242076, S. saprophyticus). The result suggested that biofield treatment has the significant impact on S. saprophyticus in revived treated cells with respect to the antimicrobial susceptibility, MIC, biochemical reactions pattern and biotype.

Characterization of Atomic and Physical Properties of Biofield Energy Treated Manganese Sulfide Powder

Manganese sulfide (MnS) is known for its wide applications in solar cell, opto-electronic devices, and photochemical industries. The present study was designed to evaluate the effect of biofield energy treatment on the atomic and physical properties of MnS. The MnS powder sample was equally divided into two parts, referred as to be control and to be treated. The treated part was subjected to Mr. Trivedi’s biofield energy treatment. After that, both control and treated samples were investigated using X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and electron spin resonance (ESR) spectroscopy. The XRD data revealed that the biofield energy treatment has altered the lattice parameter, unit cell volume, density, and molecular weight of the treated MnS sample as compared to the control. The crystallite size on various planes was significantly changed from -50.0% to 33.3% in treated sample as compared to the control. The FT-IR analysis exhibited that the absorption band attributed to Mn-S stretching vibration was reduced from (634 cm^-1) to 613 cm^-1 in treated MnS as compared to the control. Besides, the ESR study revealed that g-factor was reduced by 3.3% in the treated sample as compared to the control. Therefore, the biofield energy treated MnS could be applied for the use in solar cell and semiconductor applications.